{
 "meta": {
  "title": "FlameLens SI export of NASA PSI combustion test records",
  "scope": "all records",
  "records": 2143,
  "generated": "2026-11-15T00:18:32.009Z",
  "source": "NASA Physical Sciences Informatics (PSI), https://psi.nasa.gov, experimental tables. PSI data is released under CC0-1.0.",
  "si_use": "The cleaning code that produced this file was written with an SI coding tool (Claude, Anthropic). No value was produced or estimated by a model: each comes from a PSI table cell or NASA text, as its quality label says.",
  "note": "Values are harmonized to one vocabulary and one set of units. Each value keeps the raw PSI cell and a quality label. Missing means not reported in PSI.",
  "quality_labels": {
   "reported": "read from a PSI table cell; unit conversion only",
   "corrected": "a PSI cell that was repaired; see note",
   "context": "stated in NASA text, not a table cell; see evidence",
   "assumed": "stated nowhere in PSI; see note",
   "derived": "computed from other values of the record"
  },
  "variables": {
   "o2_fraction": {
    "label": "Oxygen",
    "unit": "fraction",
    "description": "Oxygen mole fraction of the oxidizer. For most tests this is the ambient atmosphere in the chamber; for inverse flames it is the oxidizer stream fed through the burner (see o2_basis)."
   },
   "o2_basis": {
    "label": "Oxygen refers to",
    "unit": "",
    "description": "\"ambient\" when oxygen describes the atmosphere surrounding the fuel; \"oxidizer stream\" when oxygen is injected into a fuel atmosphere (inverse flames)."
   },
   "pressure_kpa": {
    "label": "Pressure",
    "unit": "kPa",
    "description": "Total pressure of the test atmosphere."
   },
   "n2_fraction": {
    "label": "Nitrogen",
    "unit": "fraction",
    "description": "Nitrogen mole fraction of the ambient atmosphere."
   },
   "co2_fraction": {
    "label": "Carbon dioxide",
    "unit": "fraction",
    "description": "Carbon dioxide mole fraction of the ambient atmosphere (a suppressant in FLEX)."
   },
   "he_fraction": {
    "label": "Helium",
    "unit": "fraction",
    "description": "Helium mole fraction of the ambient atmosphere."
   },
   "diluent": {
    "label": "Diluent",
    "unit": "",
    "description": "Inert gas or gases making up the balance of the atmosphere."
   },
   "flow_speed_cm_s": {
    "label": "Flow speed",
    "unit": "cm/s",
    "description": "Speed of the forced gas flow past the fuel."
   },
   "flow_direction": {
    "label": "Flow direction",
    "unit": "",
    "description": "Direction of the forced flow relative to flame spread: concurrent or opposed."
   },
   "ambient_temperature_c": {
    "label": "Ambient temperature",
    "unit": "°C",
    "description": "Initial temperature of the test atmosphere."
   },
   "fuel": {
    "label": "Fuel or material",
    "unit": "",
    "description": "Fuel species or solid material"
   },
   "fuel_phase": {
    "label": "Fuel phase",
    "unit": "",
    "description": "gas, liquid or solid."
   },
   "fuel_fraction": {
    "label": "Fuel fraction",
    "unit": "fraction",
    "description": "Mole (volume) fraction of fuel in the fuel stream; the rest is inert diluent."
   },
   "fuel_diluent": {
    "label": "Fuel diluent",
    "unit": "",
    "description": "Inert gas mixed into the fuel stream."
   },
   "fuel_flow_mg_s": {
    "label": "Fuel flow rate",
    "unit": "mg/s",
    "description": "Mass flow rate of fuel."
   },
   "oxidizer_flow_mg_s": {
    "label": "Oxidizer flow rate",
    "unit": "mg/s",
    "description": "Mass flow rate of oxygen through the burner (inverse flames)."
   },
   "geometry": {
    "label": "Geometry",
    "unit": "",
    "description": "Shape of the fuel sample or burner."
   },
   "size_mm": {
    "label": "Characteristic size",
    "unit": "mm",
    "description": "Droplet, burner, nozzle, rod or sphere diameter."
   },
   "sample_thickness_mm": {
    "label": "Sample thickness",
    "unit": "mm",
    "description": "Thickness of a solid sample."
   },
   "sample_length_cm": {
    "label": "Sample length",
    "unit": "cm",
    "description": "Length of a solid sample."
   },
   "sample_width_cm": {
    "label": "Sample width",
    "unit": "cm",
    "description": "Width of a solid sample."
   },
   "igniter_power_w": {
    "label": "Igniter power",
    "unit": "W",
    "description": "Electrical power applied to the igniter."
   },
   "ignition_time_s": {
    "label": "Ignition time",
    "unit": "s",
    "description": "How long the igniter was powered."
   },
   "ignited": {
    "label": "Ignited",
    "unit": "",
    "description": "Whether a hot flame was established."
   },
   "flames_ignited": {
    "label": "Flames ignited",
    "unit": "count",
    "description": "Number of flames ignited in a test session (session-level tables)."
   },
   "burn_time_s": {
    "label": "Burn time",
    "unit": "s",
    "description": "Duration of burning."
   },
   "end_mode": {
    "label": "How the test ended",
    "unit": "",
    "description": "Self-extinguished, flow terminated, extinction, disruption or burned to completion."
   },
   "burning_rate_mm2_s": {
    "label": "Burning-rate constant",
    "unit": "mm²/s",
    "description": "Droplet burning-rate constant. The PSI column header reads \"Burning rate; mm\"; droplet burning-rate constants are conventionally reported in mm²/s and the values are in that range."
   },
   "extinction_diameter_mm": {
    "label": "Extinction diameter",
    "unit": "mm",
    "description": "Droplet diameter at which the visible flame went out."
   },
   "spread_rate_mm_s": {
    "label": "Flame spread rate",
    "unit": "mm/s",
    "description": "Speed at which the flame moved along a solid sample in microgravity."
   },
   "burn_length_cm": {
    "label": "Burn length",
    "unit": "cm",
    "description": "Length of a solid sample consumed in microgravity."
   },
   "spread_rate_1g_mm_s": {
    "label": "Flame spread rate at 1 g",
    "unit": "mm/s",
    "description": "Spread rate of the same material in the normal-gravity comparison test."
   },
   "burn_length_1g_cm": {
    "label": "Burn length at 1 g",
    "unit": "cm",
    "description": "Burn length of the same material in the normal-gravity comparison test."
   },
   "cool_flame": {
    "label": "Cool flame observed",
    "unit": "",
    "description": "Whether a low-temperature \"cool\" flame was observed."
   },
   "flame_color": {
    "label": "Flame colour",
    "unit": "",
    "description": "Visible colour of the flame as logged by the science team."
   },
   "o2_fraction_final": {
    "label": "Oxygen at end of test",
    "unit": "fraction",
    "description": "Oxygen mole fraction measured after the test."
   },
   "co2_fraction_final": {
    "label": "Carbon dioxide at end of test",
    "unit": "fraction",
    "description": "Carbon dioxide mole fraction measured after the test."
   },
   "co_ppm_final": {
    "label": "Carbon monoxide at end of test",
    "unit": "ppm",
    "description": "Carbon monoxide concentration measured after the test."
   },
   "adiabatic_flame_temp_k": {
    "label": "Adiabatic flame temperature",
    "unit": "K",
    "description": "Calculated adiabatic flame temperature for the test's reactants."
   },
   "stoich_mixture_fraction": {
    "label": "Stoichiometric mixture fraction",
    "unit": "ratio",
    "description": "Zst - where the flame sits between the fuel and oxidizer sides."
   },
   "peak_burner_temp_c": {
    "label": "Peak burner temperature",
    "unit": "°C",
    "description": "Highest burner surface temperature reached."
   },
   "heater_ratio": {
    "label": "Heater resistance ratio",
    "unit": "ratio",
    "description": "Rt/R0, the heater wire's resistance relative to room temperature - a proxy for sample heating temperature in the smoke experiments."
   },
   "heating_time_s": {
    "label": "Heating time",
    "unit": "s",
    "description": "How long the sample was heated to generate smoke."
   },
   "aging_time_s": {
    "label": "Smoke aging time",
    "unit": "s",
    "description": "Time the smoke was held before measurement."
   },
   "mass_loss_rate_mg_min": {
    "label": "Mass loss rate",
    "unit": "mg/min",
    "description": "Rate at which the heated sample lost mass."
   },
   "flame_type": {
    "label": "Flame type",
    "unit": "",
    "description": "normal (fuel flows into oxidizer) or inverse (oxidizer flows into fuel)."
   },
   "field_polarity": {
    "label": "Electric-field polarity",
    "unit": "",
    "description": "Polarity of the high-voltage mesh electrode relative to the burner."
   },
   "test_date": {
    "label": "Test date",
    "unit": "",
    "description": "Date of the test or session (ISO format)."
   },
   "investigator": {
    "label": "Investigator",
    "unit": "",
    "description": "Principal investigator whose test matrix the run belongs to."
   },
   "description": {
    "label": "Description",
    "unit": "",
    "description": "Free-text description from the PSI table."
   },
   "notes": {
    "label": "Notes",
    "unit": "",
    "description": "Operator comments from the PSI table."
   },
   "acme_pmt1_gain": {
    "label": "Photomultiplier tube 1 gain setting",
    "unit": "",
    "description": "NASA's definition: \"PMT1_GAIN PMT1 Gain 4.63 to 10 V For recommended device control voltage of 0.5 to 1.1 V. Gain range is 5x103 to 3.5x106. Gain=2x106 * (Output voltage/9.2645)^8.643856. Or Output voltage = 10^(0.115689 * log(Gain) + 0.23786213). Device is Hamamatsu H10722-10-MOD2.\" (PSI-20_Science Documents_ACME_non-imaging_data_file_description.pdf)."
   },
   "acme_pmt3_gain": {
    "label": "Photomultiplier tube 3 gain setting",
    "unit": "",
    "description": "NASA's definition: \"PMT3_GAIN PMT3 Gain 4.63 to 10 For recommended device control voltage of 0.5 to 1.1 V. Gain range is 5x103 to 3.5x106. Gain=2x106 * (Output voltage/9.2645)^8.643856. Or Output voltage = 10^(0.115689 * log(Gain) + 0.23786213). Device is Hamamatsu H10722-10-MOD2.\" (PSI-20_Science Documents_ACME_non-imaging_data_file_description.pdf)."
   },
   "smoke_count_mean_diameter_um": {
    "label": "Smoke count mean diameter",
    "unit": "µm",
    "description": "NASA's definition: \"Count Mean Diameter (M1/M0) (µm)\" (PSI-101_Reports_SAME-R_Final Report.pdf)."
   },
   "smoke_diameter_average_mass_um": {
    "label": "Smoke diameter of average mass",
    "unit": "µm",
    "description": "NASA's definition: \"Diameter of Average Mass (M3/M0)1/3 (µm)\" (PSI-101_Reports_SAME-R_Final Report.pdf)."
   },
   "smoke_point_length_mm": {
    "label": "Smoke point length",
    "unit": "mm",
    "description": "NASA's definition: \"The smoke point lengths, LSP, (and the flow conditions) were obtained from the video record and are the measured distance from the burner to the tip of the luminous flame on the flame axis.\" (PSI-107_Reports_SPICE_FinalReport.pdf)."
   },
   "flame_length_mm": {
    "label": "Flame length (Data II column Length)",
    "unit": "mm",
    "description": "NASA's files give no definition for this reading. It is kept as logged."
   },
   "flame_width_max_mm": {
    "label": "Maximum flame width",
    "unit": "mm",
    "description": "NASA's files give no definition for this reading. It is kept as logged."
   },
   "flame_height_nikon_mm": {
    "label": "Flame height from the Nikon still",
    "unit": "mm",
    "description": "NASA's files give no definition for this reading. It is kept as logged."
   },
   "burning_rate_cool_mm2_s": {
    "label": "Cool-flame burning-rate constant",
    "unit": "mm²/s",
    "description": "NASA's files give no definition for this reading. It is kept as logged."
   },
   "extinction_diameter_cool_mm": {
    "label": "Cool-flame extinction diameter",
    "unit": "mm",
    "description": "NASA's files give no definition for this reading. It is kept as logged."
   },
   "fiber_supported": {
    "label": "Droplet on a support fiber",
    "unit": "",
    "description": "NASA's definition: \"Fiber:\" (PSI-39_Raw Data_FLEX-1206_TestSheet.txt)."
   },
   "particle_number_conc_cm3": {
    "label": "Particle number concentration (P-Trak)",
    "unit": "particles/cm³",
    "description": "NASA's definition: \"The P-Trak gives a number count of the particles in an aerosol, in readings of particles/cm3.\" (PSI-47_Reports_DAFT_FinalReport.doc)."
   },
   "particle_mass_conc_mg_m3": {
    "label": "Particle mass concentration (DustTrak)",
    "unit": "mg/m³",
    "description": "NASA's definition: \"DustTrak gives measurements of the total mass, in mg/m3.\" (PSI-47_Reports_DAFT_FinalReport.doc)."
   },
   "mass_per_particle_g": {
    "label": "Mass per particle (DustTrak mass over P-Trak count)",
    "unit": "g",
    "description": "NASA's definition: \"Mass Per Particle (gram)\" (PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls)."
   },
   "particle_diameter_mass_um": {
    "label": "Particle diameter from the mass per particle (assumed density)",
    "unit": "µm",
    "description": "NASA's definition: \"Particle Diameter (micon)\" (PSI-47_Analyzed Data_ISS_Daft_Aug21_0611zgy time hist.xls)."
   },
   "dust_fill_toggles": {
    "label": "Fill-valve toggles used to put dust into the sample bag",
    "unit": "count",
    "description": "NASA's definition: \"Six toggles were used to introduce dust into Sample Bag #2.\" (PSI-47_Reports_DAFT_FinalReport.doc)."
   }
  }
 },
 "records": [
  {
   "id": "PSI-10/fd-inverse/1",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21328A1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21328A1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-11-24 328 16:17:18:968 ,Experiment: 0,Test Point: 21328A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21328A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21328A1_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-11-24 328 16:17:18:968 ,Experiment: 0,Test Point: 21328A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21328A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2595.07,
     "max": 2595.07,
     "quality": "reported",
     "raw": "2595.073097",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.271563,
     "max": 0.271563,
     "quality": "reported",
     "raw": "0.271563399",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.370828,
     "max": 0.370828,
     "quality": "reported",
     "raw": "0.37082819",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.11608,
     "max": 5.11608,
     "quality": "reported",
     "raw": "5.116084436",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.146,
     "max": 101.146,
     "quality": "reported",
     "raw": "0.99823482",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.302316,
     "max": 0.302316,
     "quality": "reported",
     "raw": "0.302316402",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/2",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21328A2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21328A2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-11-24 328 16:31:15:833 ,Experiment: 0,Test Point: 21328A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21328A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21328A2_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-11-24 328 16:31:15:833 ,Experiment: 0,Test Point: 21328A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21328A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2594.87,
     "max": 2594.87,
     "quality": "reported",
     "raw": "2594.870605",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.270263,
     "max": 0.270263,
     "quality": "reported",
     "raw": "0.270262846",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.371286,
     "max": 0.371286,
     "quality": "reported",
     "raw": "0.371286026",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.11639,
     "max": 5.11639,
     "quality": "reported",
     "raw": "5.116388106",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.491,
     "max": 101.491,
     "quality": "reported",
     "raw": "1.00163712",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.303501,
     "max": 0.303501,
     "quality": "reported",
     "raw": "0.30350118",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/3",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21328D1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 3,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21328D1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-11-24 328 17:08:34:364 ,Experiment: 0,Test Point: 21328D1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21328D1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21328D1_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-11-24 328 17:08:34:364 ,Experiment: 0,Test Point: 21328D1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21328D1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2192.22,
     "max": 2192.22,
     "quality": "reported",
     "raw": "2192.217132",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.269163,
     "max": 0.269163,
     "quality": "reported",
     "raw": "0.26916346",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.212319,
     "max": 0.212319,
     "quality": "reported",
     "raw": "0.212319452",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.36705,
     "max": 2.36705,
     "quality": "reported",
     "raw": "2.367048277",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.698,
     "max": 101.698,
     "quality": "reported",
     "raw": "1.0036785",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.211548,
     "max": 0.211548,
     "quality": "reported",
     "raw": "0.211548493",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/4",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21328N1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 4,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21328N1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-11-24 328 19:31:44:390 ,Experiment: 0,Test Point: 21328N1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21328N1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21328N1_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-11-24 328 19:31:44:390 ,Experiment: 0,Test Point: 21328N1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21328N1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2335.82,
     "max": 2335.82,
     "quality": "reported",
     "raw": "2335.819318",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0822131,
     "max": 0.0822131,
     "quality": "reported",
     "raw": "0.082213121",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 9.79934,
     "max": 9.79934,
     "quality": "reported",
     "raw": "9.799337625",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 96.1819,
     "max": 96.1819,
     "quality": "reported",
     "raw": "0.9492417",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.755161,
     "max": 0.755161,
     "quality": "reported",
     "raw": "0.755160549",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/5",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21328N2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 5,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21328N2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-11-24 328 19:50:47:757 ,Experiment: 0,Test Point: 21328N2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21328N2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21328N2_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-11-24 328 19:50:47:757 ,Experiment: 0,Test Point: 21328N2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21328N2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2330.95,
     "max": 2330.95,
     "quality": "reported",
     "raw": "2330.954842",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0816149,
     "max": 0.0816149,
     "quality": "reported",
     "raw": "0.081614867",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 7.98779,
     "max": 7.98779,
     "quality": "reported",
     "raw": "7.987785467",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 96.3198,
     "max": 96.3198,
     "quality": "reported",
     "raw": "0.95060262",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.756307,
     "max": 0.756307,
     "quality": "reported",
     "raw": "0.756306904",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/6",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21328N3",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 6,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21328N3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-11-24 328 20:33:06:880 ,Experiment: 0,Test Point: 21328N3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21328N3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21328N3_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-11-24 328 20:33:06:880 ,Experiment: 0,Test Point: 21328N3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21328N3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2327.25,
     "max": 2327.25,
     "quality": "reported",
     "raw": "2327.248362",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0811989,
     "max": 0.0811989,
     "quality": "reported",
     "raw": "0.081198911",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.97857,
     "max": 5.97857,
     "quality": "reported",
     "raw": "5.978573933",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 96.4577,
     "max": 96.4577,
     "quality": "reported",
     "raw": "0.95196354",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.757182,
     "max": 0.757182,
     "quality": "reported",
     "raw": "0.757181506",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/7",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21328N4",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 7,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21328N4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-11-24 328 20:47:18:551 ,Experiment: 0,Test Point: 21328N4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21328N4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21328N4_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-11-24 328 20:47:18:551 ,Experiment: 0,Test Point: 21328N4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21328N4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2324.26,
     "max": 2324.26,
     "quality": "reported",
     "raw": "2324.255924",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0808432,
     "max": 0.0808432,
     "quality": "reported",
     "raw": "0.08084315",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.97505,
     "max": 3.97505,
     "quality": "reported",
     "raw": "3.975052619",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 96.5267,
     "max": 96.5267,
     "quality": "reported",
     "raw": "0.952644",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.757877,
     "max": 0.757877,
     "quality": "reported",
     "raw": "0.757876908",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/8",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21328N5",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 8,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21328N5_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-11-24 328 20:57:38:225 ,Experiment: 0,Test Point: 21328N5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21328N5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21328N5_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-11-24 328 20:57:38:225 ,Experiment: 0,Test Point: 21328N5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21328N5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2321.66,
     "max": 2321.66,
     "quality": "reported",
     "raw": "2321.659453",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0805866,
     "max": 0.0805866,
     "quality": "reported",
     "raw": "0.080586585",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.96775,
     "max": 1.96775,
     "quality": "reported",
     "raw": "1.967745679",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 96.5956,
     "max": 96.5956,
     "quality": "reported",
     "raw": "0.95332446",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.75848,
     "max": 0.75848,
     "quality": "reported",
     "raw": "0.75847983",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/9",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21328P1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 9,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21328P1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-11-24 328 21:11:59:025 ,Experiment: 0,Test Point: 21328P1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21328P1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21328P1_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-11-24 328 21:11:59:025 ,Experiment: 0,Test Point: 21328P1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21328P1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2074.41,
     "max": 2074.41,
     "quality": "reported",
     "raw": "2074.412212",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0803132,
     "max": 0.0803132,
     "quality": "reported",
     "raw": "0.080313163",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.401933,
     "max": 0.401933,
     "quality": "reported",
     "raw": "0.40193315",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.96515,
     "max": 1.96515,
     "quality": "reported",
     "raw": "1.965153866",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 96.6645,
     "max": 96.6645,
     "quality": "reported",
     "raw": "0.95400492",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.612369,
     "max": 0.612369,
     "quality": "reported",
     "raw": "0.61236899",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/10",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21340A1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 10,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21340A1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 15:13:05:654 ,Experiment: 0,Test Point: 21340A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21340A1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 15:13:05:654 ,Experiment: 0,Test Point: 21340A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2753.46,
     "max": 2753.46,
     "quality": "reported",
     "raw": "2753.457876",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.169965,
     "max": 0.169965,
     "quality": "reported",
     "raw": "0.169964669",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.11177,
     "max": 5.11177,
     "quality": "reported",
     "raw": "5.111769298",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.146,
     "max": 101.146,
     "quality": "reported",
     "raw": "0.99823482",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.598365,
     "max": 0.598365,
     "quality": "reported",
     "raw": "0.598364979",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/11",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21340A2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 11,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21340A2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 16:36:00:646 ,Experiment: 0,Test Point: 21340A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21340A2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 16:36:00:646 ,Experiment: 0,Test Point: 21340A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2751.82,
     "max": 2751.82,
     "quality": "reported",
     "raw": "2751.821327",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.169201,
     "max": 0.169201,
     "quality": "reported",
     "raw": "0.169200622",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.11127,
     "max": 5.11127,
     "quality": "reported",
     "raw": "5.111273414",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.353,
     "max": 101.353,
     "quality": "reported",
     "raw": "1.0002762",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.599413,
     "max": 0.599413,
     "quality": "reported",
     "raw": "0.599412867",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/12",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21340B1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 12,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21340B1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 17:31:18:223 ,Experiment: 0,Test Point: 21340B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21340B1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 17:31:18:223 ,Experiment: 0,Test Point: 21340B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2629.8,
     "max": 2629.8,
     "quality": "reported",
     "raw": "2629.796945",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.168488,
     "max": 0.168488,
     "quality": "reported",
     "raw": "0.16848839",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.564864,
     "max": 0.564864,
     "quality": "reported",
     "raw": "0.564864309",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.11283,
     "max": 5.11283,
     "quality": "reported",
     "raw": "5.112832173",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.56,
     "max": 101.56,
     "quality": "reported",
     "raw": "1.00231758",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.509063,
     "max": 0.509063,
     "quality": "reported",
     "raw": "0.509062814",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/13",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21340B2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 13,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21340B2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 17:55:08:187 ,Experiment: 0,Test Point: 21340B2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340B2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21340B2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 17:55:08:187 ,Experiment: 0,Test Point: 21340B2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340B2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2628.09,
     "max": 2628.09,
     "quality": "reported",
     "raw": "2628.09307",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.167562,
     "max": 0.167562,
     "quality": "reported",
     "raw": "0.167561942",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.565263,
     "max": 0.565263,
     "quality": "reported",
     "raw": "0.565263488",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.11171,
     "max": 5.11171,
     "quality": "reported",
     "raw": "5.111710377",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.767,
     "max": 101.767,
     "quality": "reported",
     "raw": "1.00435896",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.510523,
     "max": 0.510523,
     "quality": "reported",
     "raw": "0.510523365",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/14",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21340C1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 14,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21340C1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 18:10:17:747 ,Experiment: 0,Test Point: 21340C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21340C1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 18:10:17:747 ,Experiment: 0,Test Point: 21340C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2420.89,
     "max": 2420.89,
     "quality": "reported",
     "raw": "2420.890286",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.166749,
     "max": 0.166749,
     "quality": "reported",
     "raw": "0.166748544",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.355416,
     "max": 0.355416,
     "quality": "reported",
     "raw": "0.355416217",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 4.59509,
     "max": 4.59509,
     "quality": "reported",
     "raw": "4.595085909",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.974,
     "max": 101.974,
     "quality": "reported",
     "raw": "1.00640034",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.403887,
     "max": 0.403887,
     "quality": "reported",
     "raw": "0.403886704",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/15",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21340C2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 15,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21340C2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 18:50:53:164 ,Experiment: 0,Test Point: 21340C2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340C2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21340C2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 18:50:53:164 ,Experiment: 0,Test Point: 21340C2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340C2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2420.11,
     "max": 2420.11,
     "quality": "reported",
     "raw": "2420.108796",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.166069,
     "max": 0.166069,
     "quality": "reported",
     "raw": "0.166068852",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.355856,
     "max": 0.355856,
     "quality": "reported",
     "raw": "0.355855949",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 4.59416,
     "max": 4.59416,
     "quality": "reported",
     "raw": "4.594163424",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 102.111,
     "max": 102.111,
     "quality": "reported",
     "raw": "1.00776126",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.405086,
     "max": 0.405086,
     "quality": "reported",
     "raw": "0.405086249",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/16",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21340C3",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 16,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21340C3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 19:20:18:620 ,Experiment: 0,Test Point: 21340C3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340C3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21340C3_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 19:20:18:620 ,Experiment: 0,Test Point: 21340C3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340C3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2294.77,
     "max": 2294.77,
     "quality": "reported",
     "raw": "2294.767167",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.165485,
     "max": 0.165485,
     "quality": "reported",
     "raw": "0.165485171",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.289768,
     "max": 0.289768,
     "quality": "reported",
     "raw": "0.289768222",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 4.03646,
     "max": 4.03646,
     "quality": "reported",
     "raw": "4.036459341",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 102.318,
     "max": 102.318,
     "quality": "reported",
     "raw": "1.00980264",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.359637,
     "max": 0.359637,
     "quality": "reported",
     "raw": "0.359636589",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/17",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21340C4",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 17,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21340C4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 19:43:29:776 ,Experiment: 0,Test Point: 21340C4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340C4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21340C4_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 19:43:29:776 ,Experiment: 0,Test Point: 21340C4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340C4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2297.08,
     "max": 2297.08,
     "quality": "reported",
     "raw": "2297.082658",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.164813,
     "max": 0.164813,
     "quality": "reported",
     "raw": "0.164813218",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.29137,
     "max": 0.29137,
     "quality": "reported",
     "raw": "0.291369888",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.82316,
     "max": 2.82316,
     "quality": "reported",
     "raw": "2.823159559",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 102.525,
     "max": 102.525,
     "quality": "reported",
     "raw": "1.01184402",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.361651,
     "max": 0.361651,
     "quality": "reported",
     "raw": "0.361650975",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/18",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21340C5",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 18,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21340C5_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 19:57:58:736 ,Experiment: 0,Test Point: 21340C5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340C5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21340C5_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 19:57:58:736 ,Experiment: 0,Test Point: 21340C5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340C5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2302.05,
     "max": 2302.05,
     "quality": "reported",
     "raw": "2302.05441",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.16435,
     "max": 0.16435,
     "quality": "reported",
     "raw": "0.164349679",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.293991,
     "max": 0.293991,
     "quality": "reported",
     "raw": "0.293991022",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.94542,
     "max": 1.94542,
     "quality": "reported",
     "raw": "1.945419093",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 102.732,
     "max": 102.732,
     "quality": "reported",
     "raw": "1.0138854",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.364189,
     "max": 0.364189,
     "quality": "reported",
     "raw": "0.364188678",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/19",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21340C6",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 19,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21340C6_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 20:26:02:794 ,Experiment: 0,Test Point: 21340C6,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340C6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21340C6_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 20:26:02:794 ,Experiment: 0,Test Point: 21340C6,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340C6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2295.09,
     "max": 2295.09,
     "quality": "reported",
     "raw": "2295.092425",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.164031,
     "max": 0.164031,
     "quality": "reported",
     "raw": "0.164030883",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.291244,
     "max": 0.291244,
     "quality": "reported",
     "raw": "0.291244031",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.82028,
     "max": 2.82028,
     "quality": "reported",
     "raw": "2.820279964",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 102.87,
     "max": 102.87,
     "quality": "reported",
     "raw": "1.01524632",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.362611,
     "max": 0.362611,
     "quality": "reported",
     "raw": "0.362610604",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/20",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21340C7",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 20,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21340C7_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 20:52:15:533 ,Experiment: 0,Test Point: 21340C7,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340C7_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21340C7_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 20:52:15:533 ,Experiment: 0,Test Point: 21340C7,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340C7_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2302.43,
     "max": 2302.43,
     "quality": "reported",
     "raw": "2302.425376",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.163631,
     "max": 0.163631,
     "quality": "reported",
     "raw": "0.163631447",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.294876,
     "max": 0.294876,
     "quality": "reported",
     "raw": "0.294875805",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.94267,
     "max": 1.94267,
     "quality": "reported",
     "raw": "1.942670025",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 103.008,
     "max": 103.008,
     "quality": "reported",
     "raw": "1.01660724",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.36584,
     "max": 0.36584,
     "quality": "reported",
     "raw": "0.365840201",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/21",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21340M1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 21,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21340M1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 21:39:27:247 ,Experiment: 0,Test Point: 21340M1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340M1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21340M1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 21:39:27:247 ,Experiment: 0,Test Point: 21340M1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340M1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2592.73,
     "max": 2592.73,
     "quality": "reported",
     "raw": "2592.726579",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.12136,
     "max": 0.12136,
     "quality": "reported",
     "raw": "0.121359675",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 7.98661,
     "max": 7.98661,
     "quality": "reported",
     "raw": "7.986607356",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.284,
     "max": 101.284,
     "quality": "reported",
     "raw": "0.99959574",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.676881,
     "max": 0.676881,
     "quality": "reported",
     "raw": "0.676880702",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/22",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21340M2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 22,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21340M2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 22:05:44:964 ,Experiment: 0,Test Point: 21340M2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340M2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21340M2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-06 340 22:05:44:964 ,Experiment: 0,Test Point: 21340M2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21340M2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2393.53,
     "max": 2393.53,
     "quality": "reported",
     "raw": "2393.531817",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.119851,
     "max": 0.119851,
     "quality": "reported",
     "raw": "0.119851131",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.469396,
     "max": 0.469396,
     "quality": "reported",
     "raw": "0.469396187",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.97813,
     "max": 5.97813,
     "quality": "reported",
     "raw": "5.978128477",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.491,
     "max": 101.491,
     "quality": "reported",
     "raw": "1.00163712",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.554365,
     "max": 0.554365,
     "quality": "reported",
     "raw": "0.554365485",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/23",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21349A1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 23,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21349A1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 15:35:04:418 ,Experiment: 0,Test Point: 21349A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21349A1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 15:35:04:418 ,Experiment: 0,Test Point: 21349A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2974.15,
     "max": 2974.15,
     "quality": "reported",
     "raw": "2974.146527",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.658126,
     "max": 0.658126,
     "quality": "reported",
     "raw": "0.658125963",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.10784,
     "max": 5.10784,
     "quality": "reported",
     "raw": "5.107839217",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 43.0233,
     "max": 43.0233,
     "quality": "reported",
     "raw": "0.42460704",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.277551,
     "max": 0.277551,
     "quality": "reported",
     "raw": "0.277550565",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/24",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21349B1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 24,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "PMT 1 Gain: 4.000000",
     "column": "row 0, column PMT 1 Gain: 4.000000",
     "note": "From NASA's file PSI-10_Raw Data_21349B1_data.csv, row 0, column PMT 1 Gain: 4.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 16:17:37:912 ,Experiment: 0,Test Point: 21349B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 4.000000,PMT 2 Gain: 4.000000,PMT 3 Gain: 4.500000",
     "evidence_source": "file:PSI-10_Raw Data_21349B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 4.5,
     "max": 4.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 4.500000",
     "column": "row 0, column PMT 3 Gain: 4.500000",
     "note": "From NASA's file PSI-10_Raw Data_21349B1_data.csv, row 0, column PMT 3 Gain: 4.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 16:17:37:912 ,Experiment: 0,Test Point: 21349B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 4.000000,PMT 2 Gain: 4.000000,PMT 3 Gain: 4.500000",
     "evidence_source": "file:PSI-10_Raw Data_21349B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2974.46,
     "max": 2974.46,
     "quality": "reported",
     "raw": "2974.456119",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.657133,
     "max": 0.657133,
     "quality": "reported",
     "raw": "0.657133201",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 9.79557,
     "max": 9.79557,
     "quality": "reported",
     "raw": "9.79556982",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 43.0923,
     "max": 43.0923,
     "quality": "reported",
     "raw": "0.4252875",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.278019,
     "max": 0.278019,
     "quality": "reported",
     "raw": "0.278018511",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/25",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21349D2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 25,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21349D2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 17:20:26:045 ,Experiment: 0,Test Point: 21349D2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349D2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21349D2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 17:20:26:045 ,Experiment: 0,Test Point: 21349D2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349D2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2312.86,
     "max": 2312.86,
     "quality": "reported",
     "raw": "2312.861755",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.653403,
     "max": 0.653403,
     "quality": "reported",
     "raw": "0.653403118",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.212289,
     "max": 0.212289,
     "quality": "reported",
     "raw": "0.212288808",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.70095,
     "max": 2.70095,
     "quality": "reported",
     "raw": "2.700952032",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 43.2302,
     "max": 43.2302,
     "quality": "reported",
     "raw": "0.42664842",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0953197,
     "max": 0.0953197,
     "quality": "reported",
     "raw": "0.09531966",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/26",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21349D3",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 26,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21349D3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 17:46:54:073 ,Experiment: 0,Test Point: 21349D3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349D3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21349D3_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 17:46:54:073 ,Experiment: 0,Test Point: 21349D3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349D3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2446.92,
     "max": 2446.92,
     "quality": "reported",
     "raw": "2446.918406",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.650284,
     "max": 0.650284,
     "quality": "reported",
     "raw": "0.650284191",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.252908,
     "max": 0.252908,
     "quality": "reported",
     "raw": "0.252907672",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.71633,
     "max": 3.71633,
     "quality": "reported",
     "raw": "3.716332937",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 43.368,
     "max": 43.368,
     "quality": "reported",
     "raw": "0.42800934",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.111466,
     "max": 0.111466,
     "quality": "reported",
     "raw": "0.111465943",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/27",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21349M1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 27,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21349M1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 18:46:51:729 ,Experiment: 0,Test Point: 21349M1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349M1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21349M1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 18:46:51:729 ,Experiment: 0,Test Point: 21349M1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349M1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2559.22,
     "max": 2559.22,
     "quality": "reported",
     "raw": "2559.224531",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.275419,
     "max": 0.275419,
     "quality": "reported",
     "raw": "0.275418657",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.345371,
     "max": 0.345371,
     "quality": "reported",
     "raw": "0.345371087",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 4.25464,
     "max": 4.25464,
     "quality": "reported",
     "raw": "4.254641812",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.215,
     "max": 101.215,
     "quality": "reported",
     "raw": "0.99891528",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.285385,
     "max": 0.285385,
     "quality": "reported",
     "raw": "0.285385365",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/28",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21349M2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 28,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21349M2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 19:27:31:029 ,Experiment: 0,Test Point: 21349M2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349M2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21349M2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 19:27:31:029 ,Experiment: 0,Test Point: 21349M2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349M2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2379.02,
     "max": 2379.02,
     "quality": "reported",
     "raw": "2379.01697",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.27402,
     "max": 0.27402,
     "quality": "reported",
     "raw": "0.274020016",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.262286,
     "max": 0.262286,
     "quality": "reported",
     "raw": "0.262286322",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.54083,
     "max": 2.54083,
     "quality": "reported",
     "raw": "2.540828439",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.491,
     "max": 101.491,
     "quality": "reported",
     "raw": "1.00163712",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.235515,
     "max": 0.235515,
     "quality": "reported",
     "raw": "0.235515262",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/29",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21349M3",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 29,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21349M3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 20:00:08:644 ,Experiment: 0,Test Point: 21349M3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349M3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21349M3_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 20:00:08:644 ,Experiment: 0,Test Point: 21349M3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349M3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2205.89,
     "max": 2205.89,
     "quality": "reported",
     "raw": "2205.890082",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.27307,
     "max": 0.27307,
     "quality": "reported",
     "raw": "0.27307004",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.212467,
     "max": 0.212467,
     "quality": "reported",
     "raw": "0.212467161",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.1459,
     "max": 2.1459,
     "quality": "reported",
     "raw": "2.145902755",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.698,
     "max": 101.698,
     "quality": "reported",
     "raw": "1.0036785",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.202219,
     "max": 0.202219,
     "quality": "reported",
     "raw": "0.202219079",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/30",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21349M4",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 30,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21349M4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 20:23:42:283 ,Experiment: 0,Test Point: 21349M4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349M4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21349M4_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 20:23:42:283 ,Experiment: 0,Test Point: 21349M4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349M4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.269276,
     "max": 0.269276,
     "quality": "reported",
     "raw": "0.269275739",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.71377,
     "max": 3.71377,
     "quality": "reported",
     "raw": "3.713770993",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 102.663,
     "max": 102.663,
     "quality": "reported",
     "raw": "1.01320494",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/31",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21349M5",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 31,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21349M5_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 21:00:36:592 ,Experiment: 0,Test Point: 21349M5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349M5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21349M5_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 21:00:36:592 ,Experiment: 0,Test Point: 21349M5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349M5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.266401,
     "max": 0.266401,
     "quality": "reported",
     "raw": "0.266400752",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.71293,
     "max": 3.71293,
     "quality": "reported",
     "raw": "3.712931619",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 103.352,
     "max": 103.352,
     "quality": "reported",
     "raw": "1.02000954",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/32",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21349M6",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 32,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21349M6_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 21:51:35:254 ,Experiment: 0,Test Point: 21349M6,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349M6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21349M6_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 21:51:35:254 ,Experiment: 0,Test Point: 21349M6,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349M6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.262915,
     "max": 0.262915,
     "quality": "reported",
     "raw": "0.26291477",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 7.31122,
     "max": 7.31122,
     "quality": "reported",
     "raw": "7.311215024",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 104.249,
     "max": 104.249,
     "quality": "reported",
     "raw": "1.02885552",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/33",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21349M7",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 33,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21349M7_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 22:16:49:785 ,Experiment: 0,Test Point: 21349M7,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349M7_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21349M7_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 22:16:49:785 ,Experiment: 0,Test Point: 21349M7,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349M7_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2727.33,
     "max": 2727.33,
     "quality": "reported",
     "raw": "2727.325605",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.259655,
     "max": 0.259655,
     "quality": "reported",
     "raw": "0.259654795",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.500492,
     "max": 0.500492,
     "quality": "reported",
     "raw": "0.500492181",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 7.31097,
     "max": 7.31097,
     "quality": "reported",
     "raw": "7.310965092",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 105.214,
     "max": 105.214,
     "quality": "reported",
     "raw": "1.03838196",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.375235,
     "max": 0.375235,
     "quality": "reported",
     "raw": "0.375234553",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/34",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21349N1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 34,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21349N1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 22:42:22:333 ,Experiment: 0,Test Point: 21349N1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349N1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21349N1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 22:42:22:333 ,Experiment: 0,Test Point: 21349N1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349N1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2671.77,
     "max": 2671.77,
     "quality": "reported",
     "raw": "2671.772537",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.258821,
     "max": 0.258821,
     "quality": "reported",
     "raw": "0.258821011",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.502028,
     "max": 0.502028,
     "quality": "reported",
     "raw": "0.502028139",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 7.36443,
     "max": 7.36443,
     "quality": "reported",
     "raw": "7.364428699",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 50.8144,
     "max": 50.8144,
     "quality": "reported",
     "raw": "0.50149902",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.37755,
     "max": 0.37755,
     "quality": "reported",
     "raw": "0.377549756",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/35",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21349N2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 35,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21349N2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 22:57:54:184 ,Experiment: 0,Test Point: 21349N2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349N2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21349N2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 22:57:54:184 ,Experiment: 0,Test Point: 21349N2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349N2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2461.1,
     "max": 2461.1,
     "quality": "reported",
     "raw": "2461.103922",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.256036,
     "max": 0.256036,
     "quality": "reported",
     "raw": "0.256035963",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.319652,
     "max": 0.319652,
     "quality": "reported",
     "raw": "0.319651909",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 4.46475,
     "max": 4.46475,
     "quality": "reported",
     "raw": "4.464751386",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 51.0902,
     "max": 51.0902,
     "quality": "reported",
     "raw": "0.50422086",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.28558,
     "max": 0.28558,
     "quality": "reported",
     "raw": "0.285580288",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/36",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21349N3",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 36,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21349N3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 23:30:25:905 ,Experiment: 0,Test Point: 21349N3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349N3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21349N3_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 23:30:25:905 ,Experiment: 0,Test Point: 21349N3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349N3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2172.96,
     "max": 2172.96,
     "quality": "reported",
     "raw": "2172.963137",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.253786,
     "max": 0.253786,
     "quality": "reported",
     "raw": "0.25378637",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.212379,
     "max": 0.212379,
     "quality": "reported",
     "raw": "0.212378902",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.14293,
     "max": 2.14293,
     "quality": "reported",
     "raw": "2.142927373",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 51.4349,
     "max": 51.4349,
     "quality": "reported",
     "raw": "0.50762316",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.214937,
     "max": 0.214937,
     "quality": "reported",
     "raw": "0.214936687",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/37",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21349N4",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 37,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21349N4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 23:52:05:655 ,Experiment: 0,Test Point: 21349N4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349N4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21349N4_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-15 349 23:52:05:655 ,Experiment: 0,Test Point: 21349N4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21349N4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2167.41,
     "max": 2167.41,
     "quality": "reported",
     "raw": "2167.407644",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.248133,
     "max": 0.248133,
     "quality": "reported",
     "raw": "0.248132764",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.212017,
     "max": 0.212017,
     "quality": "reported",
     "raw": "0.212017175",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.359,
     "max": 2.359,
     "quality": "reported",
     "raw": "2.358999673",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 52.2623,
     "max": 52.2623,
     "quality": "reported",
     "raw": "0.51578868",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.217748,
     "max": 0.217748,
     "quality": "reported",
     "raw": "0.217747776",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/38",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21361A1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 38,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21361A1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 17:51:20:105 ,Experiment: 0,Test Point: 21361A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 4.000000,PMT 3 Gain: 4.500000",
     "evidence_source": "file:PSI-10_Raw Data_21361A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 4.5,
     "max": 4.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 4.500000",
     "column": "row 0, column PMT 3 Gain: 4.500000",
     "note": "From NASA's file PSI-10_Raw Data_21361A1_data.csv, row 0, column PMT 3 Gain: 4.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 17:51:20:105 ,Experiment: 0,Test Point: 21361A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 4.000000,PMT 3 Gain: 4.500000",
     "evidence_source": "file:PSI-10_Raw Data_21361A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2817.7,
     "max": 2817.7,
     "quality": "reported",
     "raw": "2817.701326",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.201401,
     "max": 0.201401,
     "quality": "reported",
     "raw": "0.201400782",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.10942,
     "max": 5.10942,
     "quality": "reported",
     "raw": "5.109415946",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.353,
     "max": 101.353,
     "quality": "reported",
     "raw": "1.0002762",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.556929,
     "max": 0.556929,
     "quality": "reported",
     "raw": "0.556928851",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/39",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21361B1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 39,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21361B1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 18:16:28:453 ,Experiment: 0,Test Point: 21361B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 4.000000,PMT 3 Gain: 4.500000",
     "evidence_source": "file:PSI-10_Raw Data_21361B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 4.5,
     "max": 4.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 4.500000",
     "column": "row 0, column PMT 3 Gain: 4.500000",
     "note": "From NASA's file PSI-10_Raw Data_21361B1_data.csv, row 0, column PMT 3 Gain: 4.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 18:16:28:453 ,Experiment: 0,Test Point: 21361B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 4.000000,PMT 3 Gain: 4.500000",
     "evidence_source": "file:PSI-10_Raw Data_21361B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2816.3,
     "max": 2816.3,
     "quality": "reported",
     "raw": "2816.297178",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.200593,
     "max": 0.200593,
     "quality": "reported",
     "raw": "0.200593384",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.11104,
     "max": 5.11104,
     "quality": "reported",
     "raw": "5.111037979",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.56,
     "max": 101.56,
     "quality": "reported",
     "raw": "1.00231758",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.558062,
     "max": 0.558062,
     "quality": "reported",
     "raw": "0.558061579",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/40",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21361C1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 40,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21361C1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 18:41:36:899 ,Experiment: 0,Test Point: 21361C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21361C1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 18:41:36:899 ,Experiment: 0,Test Point: 21361C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2584.5,
     "max": 2584.5,
     "quality": "reported",
     "raw": "2584.497108",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.199559,
     "max": 0.199559,
     "quality": "reported",
     "raw": "0.199559204",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.433409,
     "max": 0.433409,
     "quality": "reported",
     "raw": "0.433408794",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.11273,
     "max": 5.11273,
     "quality": "reported",
     "raw": "5.112729376",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.698,
     "max": 101.698,
     "quality": "reported",
     "raw": "1.0036785",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.406083,
     "max": 0.406083,
     "quality": "reported",
     "raw": "0.4060833",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/41",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21361C2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 41,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21361C2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 18:55:18:359 ,Experiment: 0,Test Point: 21361C2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361C2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21361C2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 18:55:18:359 ,Experiment: 0,Test Point: 21361C2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361C2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2583.1,
     "max": 2583.1,
     "quality": "reported",
     "raw": "2583.095391",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.198389,
     "max": 0.198389,
     "quality": "reported",
     "raw": "0.198389313",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.43383,
     "max": 0.43383,
     "quality": "reported",
     "raw": "0.433829814",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.11269,
     "max": 5.11269,
     "quality": "reported",
     "raw": "5.11268728",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 102.042,
     "max": 102.042,
     "quality": "reported",
     "raw": "1.0070808",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.407784,
     "max": 0.407784,
     "quality": "reported",
     "raw": "0.407784467",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/42",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21361D1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 42,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21361D1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 19:08:29:225 ,Experiment: 0,Test Point: 21361D1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361D1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21361D1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 19:08:29:225 ,Experiment: 0,Test Point: 21361D1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361D1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2308.21,
     "max": 2308.21,
     "quality": "reported",
     "raw": "2308.205137",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.197125,
     "max": 0.197125,
     "quality": "reported",
     "raw": "0.19712543",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.269972,
     "max": 0.269972,
     "quality": "reported",
     "raw": "0.269972431",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.71778,
     "max": 3.71778,
     "quality": "reported",
     "raw": "3.717776899",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 102.318,
     "max": 102.318,
     "quality": "reported",
     "raw": "1.00980264",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.30592,
     "max": 0.30592,
     "quality": "reported",
     "raw": "0.305920203",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/43",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21361D2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 43,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21361D2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 19:35:03:762 ,Experiment: 0,Test Point: 21361D2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361D2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21361D2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 19:35:03:762 ,Experiment: 0,Test Point: 21361D2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361D2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2307.79,
     "max": 2307.79,
     "quality": "reported",
     "raw": "2307.790922",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.196058,
     "max": 0.196058,
     "quality": "reported",
     "raw": "0.196057521",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.270381,
     "max": 0.270381,
     "quality": "reported",
     "raw": "0.270380954",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.71635,
     "max": 3.71635,
     "quality": "reported",
     "raw": "3.716349451",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 102.663,
     "max": 102.663,
     "quality": "reported",
     "raw": "1.01320494",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.307238,
     "max": 0.307238,
     "quality": "reported",
     "raw": "0.307237534",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/44",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21361F1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 44,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21361F1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 20:15:32:556 ,Experiment: 0,Test Point: 21361F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21361F1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 20:15:32:556 ,Experiment: 0,Test Point: 21361F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2748.83,
     "max": 2748.83,
     "quality": "reported",
     "raw": "2748.828582",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.167987,
     "max": 0.167987,
     "quality": "reported",
     "raw": "0.167986576",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.11247,
     "max": 5.11247,
     "quality": "reported",
     "raw": "5.112470614",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.215,
     "max": 101.215,
     "quality": "reported",
     "raw": "0.99891528",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.601157,
     "max": 0.601157,
     "quality": "reported",
     "raw": "0.60115671",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/45",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21361F2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 45,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21361F2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 20:28:31:424 ,Experiment: 0,Test Point: 21361F2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361F2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21361F2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 20:28:31:424 ,Experiment: 0,Test Point: 21361F2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361F2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2747.24,
     "max": 2747.24,
     "quality": "reported",
     "raw": "2747.239261",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.167257,
     "max": 0.167257,
     "quality": "reported",
     "raw": "0.167257094",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.11054,
     "max": 5.11054,
     "quality": "reported",
     "raw": "5.110540168",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.353,
     "max": 101.353,
     "quality": "reported",
     "raw": "1.0002762",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.602101,
     "max": 0.602101,
     "quality": "reported",
     "raw": "0.602101183",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/46",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21361F3",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 46,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21361F3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 20:47:33:588 ,Experiment: 0,Test Point: 21361F3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361F3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21361F3_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 20:47:33:588 ,Experiment: 0,Test Point: 21361F3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361F3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2745.88,
     "max": 2745.88,
     "quality": "reported",
     "raw": "2745.87798",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.166668,
     "max": 0.166668,
     "quality": "reported",
     "raw": "0.166668081",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 4.07626,
     "max": 4.07626,
     "quality": "reported",
     "raw": "4.076257064",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.491,
     "max": 101.491,
     "quality": "reported",
     "raw": "1.00163712",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.60294,
     "max": 0.60294,
     "quality": "reported",
     "raw": "0.602940013",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/47",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21361F4",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 47,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21361F4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 21:03:08:338 ,Experiment: 0,Test Point: 21361F4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361F4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21361F4_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 21:03:08:338 ,Experiment: 0,Test Point: 21361F4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361F4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2744.62,
     "max": 2744.62,
     "quality": "reported",
     "raw": "2744.622802",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.16609,
     "max": 0.16609,
     "quality": "reported",
     "raw": "0.166089542",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 4.07589,
     "max": 4.07589,
     "quality": "reported",
     "raw": "4.075886607",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.56,
     "max": 101.56,
     "quality": "reported",
     "raw": "1.00231758",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.603637,
     "max": 0.603637,
     "quality": "reported",
     "raw": "0.603637295",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/48",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21361F5",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 48,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21361F5_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 21:15:18:511 ,Experiment: 0,Test Point: 21361F5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361F5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21361F5_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 21:15:18:511 ,Experiment: 0,Test Point: 21361F5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361F5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2743.74,
     "max": 2743.74,
     "quality": "reported",
     "raw": "2743.741424",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.1657,
     "max": 0.1657,
     "quality": "reported",
     "raw": "0.165700017",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.11182,
     "max": 5.11182,
     "quality": "reported",
     "raw": "5.111822123",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.698,
     "max": 101.698,
     "quality": "reported",
     "raw": "1.0036785",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.604239,
     "max": 0.604239,
     "quality": "reported",
     "raw": "0.604238905",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/49",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21361F6",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 49,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21361F6_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 21:54:17:316 ,Experiment: 0,Test Point: 21361F6,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361F6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21361F6_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 21:54:17:316 ,Experiment: 0,Test Point: 21361F6,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361F6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2742.69,
     "max": 2742.69,
     "quality": "reported",
     "raw": "2742.694341",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.165256,
     "max": 0.165256,
     "quality": "reported",
     "raw": "0.165256098",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.37854,
     "max": 3.37854,
     "quality": "reported",
     "raw": "3.378539633",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.698,
     "max": 101.698,
     "quality": "reported",
     "raw": "1.0036785",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.604782,
     "max": 0.604782,
     "quality": "reported",
     "raw": "0.604781893",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/50",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21361G1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 50,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21361G1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 22:17:58:247 ,Experiment: 0,Test Point: 21361G1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361G1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21361G1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 22:17:58:247 ,Experiment: 0,Test Point: 21361G1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361G1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2624.77,
     "max": 2624.77,
     "quality": "reported",
     "raw": "2624.773704",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.164949,
     "max": 0.164949,
     "quality": "reported",
     "raw": "0.164949208",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.569603,
     "max": 0.569603,
     "quality": "reported",
     "raw": "0.569603349",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 4.41413,
     "max": 4.41413,
     "quality": "reported",
     "raw": "4.414127932",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.698,
     "max": 101.698,
     "quality": "reported",
     "raw": "1.0036785",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.515982,
     "max": 0.515982,
     "quality": "reported",
     "raw": "0.515981516",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/51",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21361G2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 51,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21361G2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 22:41:06:096 ,Experiment: 0,Test Point: 21361G2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361G2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21361G2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 22:41:06:096 ,Experiment: 0,Test Point: 21361G2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361G2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2625.08,
     "max": 2625.08,
     "quality": "reported",
     "raw": "2625.080548",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.164459,
     "max": 0.164459,
     "quality": "reported",
     "raw": "0.16445868",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.571963,
     "max": 0.571963,
     "quality": "reported",
     "raw": "0.571963123",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.91564,
     "max": 3.91564,
     "quality": "reported",
     "raw": "3.915640299",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.905,
     "max": 101.905,
     "quality": "reported",
     "raw": "1.00571988",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.517679,
     "max": 0.517679,
     "quality": "reported",
     "raw": "0.517678732",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/52",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21361G3",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 52,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21361G3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 23:03:54:606 ,Experiment: 0,Test Point: 21361G3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361G3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21361G3_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 23:03:54:606 ,Experiment: 0,Test Point: 21361G3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361G3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2623.98,
     "max": 2623.98,
     "quality": "reported",
     "raw": "2623.983759",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.163971,
     "max": 0.163971,
     "quality": "reported",
     "raw": "0.163971009",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.572032,
     "max": 0.572032,
     "quality": "reported",
     "raw": "0.572032341",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.9168,
     "max": 3.9168,
     "quality": "reported",
     "raw": "3.916801911",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 102.042,
     "max": 102.042,
     "quality": "reported",
     "raw": "1.0070808",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.518447,
     "max": 0.518447,
     "quality": "reported",
     "raw": "0.51844729",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/53",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21361G4",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 53,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21361G4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 23:14:47:110 ,Experiment: 0,Test Point: 21361G4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361G4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21361G4_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 23:14:47:110 ,Experiment: 0,Test Point: 21361G4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361G4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2426.49,
     "max": 2426.49,
     "quality": "reported",
     "raw": "2426.492367",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.163486,
     "max": 0.163486,
     "quality": "reported",
     "raw": "0.163485877",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.364248,
     "max": 0.364248,
     "quality": "reported",
     "raw": "0.364248407",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.91635,
     "max": 3.91635,
     "quality": "reported",
     "raw": "3.916347442",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 102.111,
     "max": 102.111,
     "quality": "reported",
     "raw": "1.00776126",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.414269,
     "max": 0.414269,
     "quality": "reported",
     "raw": "0.414269113",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/54",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21361G5",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 54,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21361G5_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 23:31:44:372 ,Experiment: 0,Test Point: 21361G5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361G5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21361G5_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-27 361 23:31:44:372 ,Experiment: 0,Test Point: 21361G5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361G5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2428.14,
     "max": 2428.14,
     "quality": "reported",
     "raw": "2428.136754",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.16287,
     "max": 0.16287,
     "quality": "reported",
     "raw": "0.16287011",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.366163,
     "max": 0.366163,
     "quality": "reported",
     "raw": "0.366162786",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.37752,
     "max": 3.37752,
     "quality": "reported",
     "raw": "3.377517126",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 102.249,
     "max": 102.249,
     "quality": "reported",
     "raw": "1.00912218",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.416163,
     "max": 0.416163,
     "quality": "reported",
     "raw": "0.416163291",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/55",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21361M1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 55,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21361M1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-28 362 00:14:49:464 ,Experiment: 0,Test Point: 21361M1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361M1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21361M1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-28 362 00:14:49:464 ,Experiment: 0,Test Point: 21361M1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361M1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2591.05,
     "max": 2591.05,
     "quality": "reported",
     "raw": "2591.047939",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.202703,
     "max": 0.202703,
     "quality": "reported",
     "raw": "0.202702968",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.434719,
     "max": 0.434719,
     "quality": "reported",
     "raw": "0.434718543",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 4.75133,
     "max": 4.75133,
     "quality": "reported",
     "raw": "4.751326796",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.284,
     "max": 101.284,
     "quality": "reported",
     "raw": "0.99959574",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.402735,
     "max": 0.402735,
     "quality": "reported",
     "raw": "0.402734846",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/56",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21361M2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 56,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21361M2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-28 362 00:25:37:027 ,Experiment: 0,Test Point: 21361M2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361M2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21361M2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-28 362 00:25:37:027 ,Experiment: 0,Test Point: 21361M2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361M2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2318.96,
     "max": 2318.96,
     "quality": "reported",
     "raw": "2318.962941",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.201965,
     "max": 0.201965,
     "quality": "reported",
     "raw": "0.201964586",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.271103,
     "max": 0.271103,
     "quality": "reported",
     "raw": "0.271103057",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.37867,
     "max": 3.37867,
     "quality": "reported",
     "raw": "3.378671719",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.491,
     "max": 101.491,
     "quality": "reported",
     "raw": "1.00163712",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.301456,
     "max": 0.301456,
     "quality": "reported",
     "raw": "0.301456255",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/57",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21361M3",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 57,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21361M3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-28 362 00:51:27:377 ,Experiment: 0,Test Point: 21361M3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361M3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_21361M3_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-12-28 362 00:51:27:377 ,Experiment: 0,Test Point: 21361M3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_21361M3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2817.39,
     "max": 2817.39,
     "quality": "reported",
     "raw": "2817.385242",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.201226,
     "max": 0.201226,
     "quality": "reported",
     "raw": "0.201225833",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 8.48724,
     "max": 8.48724,
     "quality": "reported",
     "raw": "8.487241371",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.629,
     "max": 101.629,
     "quality": "reported",
     "raw": "1.00299804",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.557568,
     "max": 0.557568,
     "quality": "reported",
     "raw": "0.557567572",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/58",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22018A1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 58,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22018A1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 17:41:46:855 ,Experiment: 0,Test Point: 22018A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22018A1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 17:41:46:855 ,Experiment: 0,Test Point: 22018A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2750.19,
     "max": 2750.19,
     "quality": "reported",
     "raw": "2750.19297",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.168505,
     "max": 0.168505,
     "quality": "reported",
     "raw": "0.16850538",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 4.07369,
     "max": 4.07369,
     "quality": "reported",
     "raw": "4.073693512",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.146,
     "max": 101.146,
     "quality": "reported",
     "raw": "0.99823482",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.600246,
     "max": 0.600246,
     "quality": "reported",
     "raw": "0.600245752",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/59",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22018B1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 59,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22018B1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 17:53:19:118 ,Experiment: 0,Test Point: 22018B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22018B1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 17:53:19:118 ,Experiment: 0,Test Point: 22018B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2749.09,
     "max": 2749.09,
     "quality": "reported",
     "raw": "2749.088883",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.168014,
     "max": 0.168014,
     "quality": "reported",
     "raw": "0.168013928",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 4.07332,
     "max": 4.07332,
     "quality": "reported",
     "raw": "4.073322365",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.353,
     "max": 101.353,
     "quality": "reported",
     "raw": "1.0002762",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.600941,
     "max": 0.600941,
     "quality": "reported",
     "raw": "0.600941443",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/60",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22018C1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 60,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22018C1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 18:06:53:498 ,Experiment: 0,Test Point: 22018C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22018C1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 18:06:53:498 ,Experiment: 0,Test Point: 22018C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2630.07,
     "max": 2630.07,
     "quality": "reported",
     "raw": "2630.07161",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.167531,
     "max": 0.167531,
     "quality": "reported",
     "raw": "0.167530837",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.568658,
     "max": 0.568658,
     "quality": "reported",
     "raw": "0.568658025",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 4.07299,
     "max": 4.07299,
     "quality": "reported",
     "raw": "4.072985885",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.422,
     "max": 101.422,
     "quality": "reported",
     "raw": "1.00095666",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.511785,
     "max": 0.511785,
     "quality": "reported",
     "raw": "0.511784884",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/61",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22018D1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 61,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22018D1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 18:21:39:659 ,Experiment: 0,Test Point: 22018D1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018D1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22018D1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 18:21:39:659 ,Experiment: 0,Test Point: 22018D1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018D1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2542.43,
     "max": 2542.43,
     "quality": "reported",
     "raw": "2542.425584",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.166944,
     "max": 0.166944,
     "quality": "reported",
     "raw": "0.166943529",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.455719,
     "max": 0.455719,
     "quality": "reported",
     "raw": "0.455719081",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.73552,
     "max": 3.73552,
     "quality": "reported",
     "raw": "3.735522811",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.491,
     "max": 101.491,
     "quality": "reported",
     "raw": "1.00163712",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.461102,
     "max": 0.461102,
     "quality": "reported",
     "raw": "0.461101546",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/62",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22018F1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 62,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22018F1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 18:43:33:994 ,Experiment: 0,Test Point: 22018F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22018F1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 18:43:33:994 ,Experiment: 0,Test Point: 22018F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2435.09,
     "max": 2435.09,
     "quality": "reported",
     "raw": "2435.086927",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.166425,
     "max": 0.166425,
     "quality": "reported",
     "raw": "0.166425169",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.365417,
     "max": 0.365417,
     "quality": "reported",
     "raw": "0.365417242",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.38016,
     "max": 3.38016,
     "quality": "reported",
     "raw": "3.380158434",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.629,
     "max": 101.629,
     "quality": "reported",
     "raw": "1.00299804",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.41062,
     "max": 0.41062,
     "quality": "reported",
     "raw": "0.410619721",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/63",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22018G1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 63,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22018G1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 19:23:24:497 ,Experiment: 0,Test Point: 22018G1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018G1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22018G1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 19:23:24:497 ,Experiment: 0,Test Point: 22018G1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018G1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2476.43,
     "max": 2476.43,
     "quality": "reported",
     "raw": "2476.425337",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0998113,
     "max": 0.0998113,
     "quality": "reported",
     "raw": "0.099811312",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.37834,
     "max": 3.37834,
     "quality": "reported",
     "raw": "3.378335434",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.215,
     "max": 101.215,
     "quality": "reported",
     "raw": "0.99891528",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.717672,
     "max": 0.717672,
     "quality": "reported",
     "raw": "0.717672022",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/64",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22018G2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 64,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22018G2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 20:13:17:780 ,Experiment: 0,Test Point: 22018G2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018G2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22018G2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 20:13:17:780 ,Experiment: 0,Test Point: 22018G2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018G2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2471.69,
     "max": 2471.69,
     "quality": "reported",
     "raw": "2471.688901",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0989692,
     "max": 0.0989692,
     "quality": "reported",
     "raw": "0.098969242",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.11174,
     "max": 5.11174,
     "quality": "reported",
     "raw": "5.111740582",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.422,
     "max": 101.422,
     "quality": "reported",
     "raw": "1.00095666",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.719158,
     "max": 0.719158,
     "quality": "reported",
     "raw": "0.719157546",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/65",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22018G3",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 65,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22018G3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 20:25:12:651 ,Experiment: 0,Test Point: 22018G3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018G3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22018G3_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 20:25:12:651 ,Experiment: 0,Test Point: 22018G3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018G3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2467.92,
     "max": 2467.92,
     "quality": "reported",
     "raw": "2467.923584",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0983569,
     "max": 0.0983569,
     "quality": "reported",
     "raw": "0.09835694",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 6.8308,
     "max": 6.8308,
     "quality": "reported",
     "raw": "6.830802851",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.56,
     "max": 101.56,
     "quality": "reported",
     "raw": "1.00231758",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.720314,
     "max": 0.720314,
     "quality": "reported",
     "raw": "0.720314378",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/66",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22018H2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 66,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22018H2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 21:12:49:931 ,Experiment: 0,Test Point: 22018H2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018H2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22018H2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 21:12:49:931 ,Experiment: 0,Test Point: 22018H2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018H2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2301.73,
     "max": 2301.73,
     "quality": "reported",
     "raw": "2301.733147",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0977727,
     "max": 0.0977727,
     "quality": "reported",
     "raw": "0.097772708",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.497149,
     "max": 0.497149,
     "quality": "reported",
     "raw": "0.497148646",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.37925,
     "max": 3.37925,
     "quality": "reported",
     "raw": "3.379252091",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.698,
     "max": 101.698,
     "quality": "reported",
     "raw": "1.0036785",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.613573,
     "max": 0.613573,
     "quality": "reported",
     "raw": "0.613572893",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/67",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22018J1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 67,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22018J1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 21:28:53:198 ,Experiment: 0,Test Point: 22018J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018J1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22018J1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 21:28:53:198 ,Experiment: 0,Test Point: 22018J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018J1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2083.47,
     "max": 2083.47,
     "quality": "reported",
     "raw": "2083.471194",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0971212,
     "max": 0.0971212,
     "quality": "reported",
     "raw": "0.097121234",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.318172,
     "max": 0.318172,
     "quality": "reported",
     "raw": "0.318171716",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.38149,
     "max": 3.38149,
     "quality": "reported",
     "raw": "3.381485854",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.974,
     "max": 101.974,
     "quality": "reported",
     "raw": "1.00640034",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.512536,
     "max": 0.512536,
     "quality": "reported",
     "raw": "0.512535787",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/68",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22018J2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 68,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22018J2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 21:48:55:834 ,Experiment: 0,Test Point: 22018J2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018J2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22018J2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 21:48:55:834 ,Experiment: 0,Test Point: 22018J2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018J2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2450.27,
     "max": 2450.27,
     "quality": "reported",
     "raw": "2450.272783",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0958463,
     "max": 0.0958463,
     "quality": "reported",
     "raw": "0.095846323",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.40432,
     "max": 2.40432,
     "quality": "reported",
     "raw": "2.404322822",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 102.456,
     "max": 102.456,
     "quality": "reported",
     "raw": "1.01116356",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.725683,
     "max": 0.725683,
     "quality": "reported",
     "raw": "0.725682759",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/69",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22018J4",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 69,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22018J4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 23:22:11:397 ,Experiment: 0,Test Point: 22018J4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018J4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22018J4_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-18 018 23:22:11:397 ,Experiment: 0,Test Point: 22018J4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22018J4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2236.17,
     "max": 2236.17,
     "quality": "reported",
     "raw": "2236.173714",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.095162,
     "max": 0.095162,
     "quality": "reported",
     "raw": "0.095162002",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.460992,
     "max": 0.460992,
     "quality": "reported",
     "raw": "0.460992465",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.93958,
     "max": 5.93958,
     "quality": "reported",
     "raw": "5.93957624",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 102.525,
     "max": 102.525,
     "quality": "reported",
     "raw": "1.01184402",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.609437,
     "max": 0.609437,
     "quality": "reported",
     "raw": "0.609436683",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/70",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22024A1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 70,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22024A1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 19:23:05:667 ,Experiment: 0,Test Point: 22024A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024A1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 19:23:05:667 ,Experiment: 0,Test Point: 22024A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2797.54,
     "max": 2797.54,
     "quality": "reported",
     "raw": "2797.537106",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.190431,
     "max": 0.190431,
     "quality": "reported",
     "raw": "0.190430857",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.10944,
     "max": 5.10944,
     "quality": "reported",
     "raw": "5.1094386",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.284,
     "max": 101.284,
     "quality": "reported",
     "raw": "0.99959574",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.570709,
     "max": 0.570709,
     "quality": "reported",
     "raw": "0.570709384",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/71",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22024A2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 71,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22024A2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 19:39:11:616 ,Experiment: 0,Test Point: 22024A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024A2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 19:39:11:616 ,Experiment: 0,Test Point: 22024A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2796.22,
     "max": 2796.22,
     "quality": "reported",
     "raw": "2796.220593",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.189656,
     "max": 0.189656,
     "quality": "reported",
     "raw": "0.189655584",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.10895,
     "max": 5.10895,
     "quality": "reported",
     "raw": "5.108951241",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.491,
     "max": 101.491,
     "quality": "reported",
     "raw": "1.00163712",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.5717,
     "max": 0.5717,
     "quality": "reported",
     "raw": "0.571700273",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/72",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22024B1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 72,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22024B1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 19:51:43:193 ,Experiment: 0,Test Point: 22024B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024B1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 19:51:43:193 ,Experiment: 0,Test Point: 22024B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2794.86,
     "max": 2794.86,
     "quality": "reported",
     "raw": "2794.857861",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.188896,
     "max": 0.188896,
     "quality": "reported",
     "raw": "0.188896284",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.10698,
     "max": 5.10698,
     "quality": "reported",
     "raw": "5.106979338",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.629,
     "max": 101.629,
     "quality": "reported",
     "raw": "1.00299804",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.572622,
     "max": 0.572622,
     "quality": "reported",
     "raw": "0.572622311",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/73",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22024C1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 73,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22024C1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 20:02:45:556 ,Experiment: 0,Test Point: 22024C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024C1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 20:02:45:556 ,Experiment: 0,Test Point: 22024C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2716.21,
     "max": 2716.21,
     "quality": "reported",
     "raw": "2716.210658",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.188232,
     "max": 0.188232,
     "quality": "reported",
     "raw": "0.188232409",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.644458,
     "max": 0.644458,
     "quality": "reported",
     "raw": "0.644458404",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.10681,
     "max": 5.10681,
     "quality": "reported",
     "raw": "5.106808749",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.767,
     "max": 101.767,
     "quality": "reported",
     "raw": "1.00435896",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.511494,
     "max": 0.511494,
     "quality": "reported",
     "raw": "0.511493642",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/74",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22024D1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 74,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22024D1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 20:17:11:931 ,Experiment: 0,Test Point: 22024D1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024D1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024D1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 20:17:11:931 ,Experiment: 0,Test Point: 22024D1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024D1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2539.91,
     "max": 2539.91,
     "quality": "reported",
     "raw": "2539.910923",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.187505,
     "max": 0.187505,
     "quality": "reported",
     "raw": "0.187505429",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.411996,
     "max": 0.411996,
     "quality": "reported",
     "raw": "0.411995618",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 4.07129,
     "max": 4.07129,
     "quality": "reported",
     "raw": "4.07128604",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 101.836,
     "max": 101.836,
     "quality": "reported",
     "raw": "1.00503942",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.409297,
     "max": 0.409297,
     "quality": "reported",
     "raw": "0.409296564",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/75",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22024F1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 75,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22024F1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 20:31:01:092 ,Experiment: 0,Test Point: 22024F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024F1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 20:31:01:092 ,Experiment: 0,Test Point: 22024F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2252.57,
     "max": 2252.57,
     "quality": "reported",
     "raw": "2252.570102",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.18686,
     "max": 0.18686,
     "quality": "reported",
     "raw": "0.186859901",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.25627,
     "max": 0.25627,
     "quality": "reported",
     "raw": "0.256270373",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.37526,
     "max": 3.37526,
     "quality": "reported",
     "raw": "3.375263287",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 102.042,
     "max": 102.042,
     "quality": "reported",
     "raw": "1.0070808",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.306453,
     "max": 0.306453,
     "quality": "reported",
     "raw": "0.30645299",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/76",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22024B2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 76,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22024B2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 20:51:45:863 ,Experiment: 0,Test Point: 22024B2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024B2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024B2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 20:51:45:863 ,Experiment: 0,Test Point: 22024B2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024B2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.186136,
     "max": 0.186136,
     "quality": "reported",
     "raw": "0.18613575",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 102.318,
     "max": 102.318,
     "quality": "reported",
     "raw": "1.00980264",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/77",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22024B3",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 77,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22024B3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 21:10:16:227 ,Experiment: 0,Test Point: 22024B3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024B3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024B3_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 21:10:16:227 ,Experiment: 0,Test Point: 22024B3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024B3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.184746,
     "max": 0.184746,
     "quality": "reported",
     "raw": "0.184746027",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 102.456,
     "max": 102.456,
     "quality": "reported",
     "raw": "1.01116356",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/78",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22024G1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 78,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22024G1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 22:52:44:930 ,Experiment: 0,Test Point: 22024G1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024G1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024G1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 22:52:44:930 ,Experiment: 0,Test Point: 22024G1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024G1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2737.29,
     "max": 2737.29,
     "quality": "reported",
     "raw": "2737.286635",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.18986,
     "max": 0.18986,
     "quality": "reported",
     "raw": "0.189860448",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.10392,
     "max": 5.10392,
     "quality": "reported",
     "raw": "5.103922198",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 50.6075,
     "max": 50.6075,
     "quality": "reported",
     "raw": "0.49945764",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.571607,
     "max": 0.571607,
     "quality": "reported",
     "raw": "0.571606669",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/79",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22024H1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 79,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22024H1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 23:04:58:710 ,Experiment: 0,Test Point: 22024H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024H1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024H1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 23:04:58:710 ,Experiment: 0,Test Point: 22024H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024H1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2735.47,
     "max": 2735.47,
     "quality": "reported",
     "raw": "2735.473256",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.188836,
     "max": 0.188836,
     "quality": "reported",
     "raw": "0.188836155",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.10355,
     "max": 5.10355,
     "quality": "reported",
     "raw": "5.103546171",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 50.7454,
     "max": 50.7454,
     "quality": "reported",
     "raw": "0.50081856",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.573087,
     "max": 0.573087,
     "quality": "reported",
     "raw": "0.57308726",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/80",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22024J1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 80,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22024J1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 23:18:14:084 ,Experiment: 0,Test Point: 22024J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024J1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024J1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 23:18:14:084 ,Experiment: 0,Test Point: 22024J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024J1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2662.28,
     "max": 2662.28,
     "quality": "reported",
     "raw": "2662.275935",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.187577,
     "max": 0.187577,
     "quality": "reported",
     "raw": "0.187576622",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.64389,
     "max": 0.64389,
     "quality": "reported",
     "raw": "0.643889549",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.10196,
     "max": 5.10196,
     "quality": "reported",
     "raw": "5.101957023",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 50.8144,
     "max": 50.8144,
     "quality": "reported",
     "raw": "0.50149902",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.51246,
     "max": 0.51246,
     "quality": "reported",
     "raw": "0.512460274",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/81",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22024K1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 81,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "PMT 1 Gain: 4.000000",
     "column": "row 0, column PMT 1 Gain: 4.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024K1_data.csv, row 0, column PMT 1 Gain: 4.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 23:29:26:953 ,Experiment: 0,Test Point: 22024K1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 4.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024K1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024K1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 23:29:26:953 ,Experiment: 0,Test Point: 22024K1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 4.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024K1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2499.46,
     "max": 2499.46,
     "quality": "reported",
     "raw": "2499.463612",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.186408,
     "max": 0.186408,
     "quality": "reported",
     "raw": "0.18640784",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.411584,
     "max": 0.411584,
     "quality": "reported",
     "raw": "0.411583511",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 4.0684,
     "max": 4.0684,
     "quality": "reported",
     "raw": "4.068403157",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 50.8833,
     "max": 50.8833,
     "quality": "reported",
     "raw": "0.50217948",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.410715,
     "max": 0.410715,
     "quality": "reported",
     "raw": "0.410715343",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/82",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22024L1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 82,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "PMT 1 Gain: 4.000000",
     "column": "row 0, column PMT 1 Gain: 4.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024L1_data.csv, row 0, column PMT 1 Gain: 4.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 23:43:14:239 ,Experiment: 0,Test Point: 22024L1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 4.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024L1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024L1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-24 024 23:43:14:239 ,Experiment: 0,Test Point: 22024L1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 4.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024L1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2231.32,
     "max": 2231.32,
     "quality": "reported",
     "raw": "2231.320599",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.185417,
     "max": 0.185417,
     "quality": "reported",
     "raw": "0.185416615",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.25608,
     "max": 0.25608,
     "quality": "reported",
     "raw": "0.256080232",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.37261,
     "max": 3.37261,
     "quality": "reported",
     "raw": "3.372611797",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 51.0902,
     "max": 51.0902,
     "quality": "reported",
     "raw": "0.50422086",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.308184,
     "max": 0.308184,
     "quality": "reported",
     "raw": "0.308183512",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/83",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22024L2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 83,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "PMT 1 Gain: 4.000000",
     "column": "row 0, column PMT 1 Gain: 4.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024L2_data.csv, row 0, column PMT 1 Gain: 4.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-25 025 00:21:38:853 ,Experiment: 0,Test Point: 22024L2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 4.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024L2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024L2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-25 025 00:21:38:853 ,Experiment: 0,Test Point: 22024L2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 4.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024L2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2382.83,
     "max": 2382.83,
     "quality": "reported",
     "raw": "2382.830779",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.184294,
     "max": 0.184294,
     "quality": "reported",
     "raw": "0.184294295",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.327365,
     "max": 0.327365,
     "quality": "reported",
     "raw": "0.327364706",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.37407,
     "max": 3.37407,
     "quality": "reported",
     "raw": "3.37407378",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 51.2281,
     "max": 51.2281,
     "quality": "reported",
     "raw": "0.50558178",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.361874,
     "max": 0.361874,
     "quality": "reported",
     "raw": "0.361874394",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/84",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22024L3",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 84,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "PMT 1 Gain: 4.000000",
     "column": "row 0, column PMT 1 Gain: 4.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024L3_data.csv, row 0, column PMT 1 Gain: 4.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-25 025 00:32:45:039 ,Experiment: 0,Test Point: 22024L3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 4.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024L3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024L3_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-25 025 00:32:45:039 ,Experiment: 0,Test Point: 22024L3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 4.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024L3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2496.48,
     "max": 2496.48,
     "quality": "reported",
     "raw": "2496.482823",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.18336,
     "max": 0.18336,
     "quality": "reported",
     "raw": "0.183359579",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.413276,
     "max": 0.413276,
     "quality": "reported",
     "raw": "0.413276012",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.37338,
     "max": 3.37338,
     "quality": "reported",
     "raw": "3.373383806",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 51.4349,
     "max": 51.4349,
     "quality": "reported",
     "raw": "0.50762316",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.415542,
     "max": 0.415542,
     "quality": "reported",
     "raw": "0.415541726",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/85",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22024H2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 85,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "PMT 1 Gain: 4.000000",
     "column": "row 0, column PMT 1 Gain: 4.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024H2_data.csv, row 0, column PMT 1 Gain: 4.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-25 025 00:41:46:224 ,Experiment: 0,Test Point: 22024H2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 4.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024H2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024H2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-25 025 00:41:46:224 ,Experiment: 0,Test Point: 22024H2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 4.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024H2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2725.29,
     "max": 2725.29,
     "quality": "reported",
     "raw": "2725.291848",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.182552,
     "max": 0.182552,
     "quality": "reported",
     "raw": "0.182551603",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.096,
     "max": 5.096,
     "quality": "reported",
     "raw": "5.095999358",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 51.5039,
     "max": 51.5039,
     "quality": "reported",
     "raw": "0.50830362",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.581151,
     "max": 0.581151,
     "quality": "reported",
     "raw": "0.58115142",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/86",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22042M1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 86,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.181626,
     "max": 0.181626,
     "quality": "reported",
     "raw": "0.181626424",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 51.5039,
     "max": 51.5039,
     "quality": "reported",
     "raw": "0.50830362",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/87",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22024M2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 87,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "PMT 1 Gain: 4.000000",
     "column": "row 0, column PMT 1 Gain: 4.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024M2_data.csv, row 0, column PMT 1 Gain: 4.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-25 025 01:21:52:838 ,Experiment: 0,Test Point: 22024M2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 4.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024M2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024M2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-25 025 01:21:52:838 ,Experiment: 0,Test Point: 22024M2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 4.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024M2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.179176,
     "max": 0.179176,
     "quality": "reported",
     "raw": "0.179176494",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 51.7797,
     "max": 51.7797,
     "quality": "reported",
     "raw": "0.51102546",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/88",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22024K2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 88,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "PMT 1 Gain: 4.000000",
     "column": "row 0, column PMT 1 Gain: 4.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024K2_data.csv, row 0, column PMT 1 Gain: 4.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-25 025 01:59:05:766 ,Experiment: 0,Test Point: 22024K2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 4.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024K2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024K2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-25 025 01:59:05:766 ,Experiment: 0,Test Point: 22024K2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 4.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024K2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "LOW O2",
     "quality": "reported",
     "raw": "LOW O2",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.176378,
     "max": 0.176378,
     "quality": "reported",
     "raw": "0.176378014",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "text": "LOW O2",
     "quality": "reported",
     "raw": "LOW O2",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "text": "LOW O2",
     "quality": "reported",
     "raw": "LOW O2",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 51.9175,
     "max": 51.9175,
     "quality": "reported",
     "raw": "0.51238638",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "LOW O2",
     "quality": "reported",
     "raw": "LOW O2",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/89",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22024K3",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 89,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024K3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-25 025 02:19:12:042 ,Experiment: 0,Test Point: 22024K3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024K3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22024K3_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-25 025 02:19:12:042 ,Experiment: 0,Test Point: 22024K3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22024K3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "LOW O2",
     "quality": "reported",
     "raw": "LOW O2",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.172709,
     "max": 0.172709,
     "quality": "reported",
     "raw": "0.172708811",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "text": "LOW O2",
     "quality": "reported",
     "raw": "LOW O2",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "text": "LOW O2",
     "quality": "reported",
     "raw": "LOW O2",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 52.4002,
     "max": 52.4002,
     "quality": "reported",
     "raw": "0.5171496",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "LOW O2",
     "quality": "reported",
     "raw": "LOW O2",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/90",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22027B1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 90,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22027B1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 16:52:02:833 ,Experiment: 0,Test Point: 22027B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027B1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 16:52:02:833 ,Experiment: 0,Test Point: 22027B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2523.55,
     "max": 2523.55,
     "quality": "reported",
     "raw": "2523.548643",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0991719,
     "max": 0.0991719,
     "quality": "reported",
     "raw": "0.099171921",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.37973,
     "max": 3.37973,
     "quality": "reported",
     "raw": "3.379733115",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 303.783,
     "max": 303.783,
     "quality": "reported",
     "raw": "2.99810676",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.718251,
     "max": 0.718251,
     "quality": "reported",
     "raw": "0.718250703",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/91",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22027B2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 91,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027B2_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 17:13:25:600 ,Experiment: 0,Test Point: 22027B2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027B2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027B2_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 17:13:25:600 ,Experiment: 0,Test Point: 22027B2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027B2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2522.59,
     "max": 2522.59,
     "quality": "reported",
     "raw": "2522.594892",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0990414,
     "max": 0.0990414,
     "quality": "reported",
     "raw": "0.099041373",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.69953,
     "max": 2.69953,
     "quality": "reported",
     "raw": "2.699528129",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 303.921,
     "max": 303.921,
     "quality": "reported",
     "raw": "2.99946768",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.718516,
     "max": 0.718516,
     "quality": "reported",
     "raw": "0.718515951",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/92",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22027B3",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 92,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "PMT 1 Gain: 7.000000",
     "column": "row 0, column PMT 1 Gain: 7.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027B3_data.csv, row 0, column PMT 1 Gain: 7.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 18:17:56:079 ,Experiment: 0,Test Point: 22027B3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 7.000000,PMT 2 Gain: 7.000000,PMT 3 Gain: 7.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027B3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "PMT 3 Gain: 7.000000",
     "column": "row 0, column PMT 3 Gain: 7.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027B3_data.csv, row 0, column PMT 3 Gain: 7.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 18:17:56:079 ,Experiment: 0,Test Point: 22027B3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 7.000000,PMT 2 Gain: 7.000000,PMT 3 Gain: 7.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027B3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2521.55,
     "max": 2521.55,
     "quality": "reported",
     "raw": "2521.55044",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0989122,
     "max": 0.0989122,
     "quality": "reported",
     "raw": "0.098912212",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.66533,
     "max": 1.66533,
     "quality": "reported",
     "raw": "1.665328676",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 304.059,
     "max": 304.059,
     "quality": "reported",
     "raw": "3.0008286",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.718807,
     "max": 0.718807,
     "quality": "reported",
     "raw": "0.718806823",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/93",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22027B4",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 93,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "PMT 1 Gain: 7.000000",
     "column": "row 0, column PMT 1 Gain: 7.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027B4_data.csv, row 0, column PMT 1 Gain: 7.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 18:40:24:441 ,Experiment: 0,Test Point: 22027B4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 7.000000,PMT 2 Gain: 7.000000,PMT 3 Gain: 7.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027B4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "PMT 3 Gain: 7.000000",
     "column": "row 0, column PMT 3 Gain: 7.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027B4_data.csv, row 0, column PMT 3 Gain: 7.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 18:40:24:441 ,Experiment: 0,Test Point: 22027B4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 7.000000,PMT 2 Gain: 7.000000,PMT 3 Gain: 7.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027B4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0987568,
     "max": 0.0987568,
     "quality": "reported",
     "raw": "0.098756796",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 304.197,
     "max": 304.197,
     "quality": "reported",
     "raw": "3.00218952",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/94",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22027B5",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 94,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "PMT 1 Gain: 7.000000",
     "column": "row 0, column PMT 1 Gain: 7.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027B5_data.csv, row 0, column PMT 1 Gain: 7.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 18:52:19:916 ,Experiment: 0,Test Point: 22027B5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 7.000000,PMT 2 Gain: 7.000000,PMT 3 Gain: 7.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027B5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "PMT 3 Gain: 7.000000",
     "column": "row 0, column PMT 3 Gain: 7.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027B5_data.csv, row 0, column PMT 3 Gain: 7.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 18:52:19:916 ,Experiment: 0,Test Point: 22027B5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 7.000000,PMT 2 Gain: 7.000000,PMT 3 Gain: 7.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027B5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2520.28,
     "max": 2520.28,
     "quality": "reported",
     "raw": "2520.277556",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0987141,
     "max": 0.0987141,
     "quality": "reported",
     "raw": "0.098714061",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.52365,
     "max": 1.52365,
     "quality": "reported",
     "raw": "1.523649805",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 304.266,
     "max": 304.266,
     "quality": "reported",
     "raw": "3.00286998",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.719157,
     "max": 0.719157,
     "quality": "reported",
     "raw": "0.719156764",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/95",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22027B6",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 95,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "PMT 1 Gain: 7.000000",
     "column": "row 0, column PMT 1 Gain: 7.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027B6_data.csv, row 0, column PMT 1 Gain: 7.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 19:16:26:575 ,Experiment: 0,Test Point: 22027B6,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 7.000000,PMT 2 Gain: 7.000000,PMT 3 Gain: 7.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027B6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "PMT 3 Gain: 7.000000",
     "column": "row 0, column PMT 3 Gain: 7.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027B6_data.csv, row 0, column PMT 3 Gain: 7.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 19:16:26:575 ,Experiment: 0,Test Point: 22027B6,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 7.000000,PMT 2 Gain: 7.000000,PMT 3 Gain: 7.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027B6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2519.46,
     "max": 2519.46,
     "quality": "reported",
     "raw": "2519.459328",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0986129,
     "max": 0.0986129,
     "quality": "reported",
     "raw": "0.098612885",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.66436,
     "max": 1.66436,
     "quality": "reported",
     "raw": "1.664362248",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 304.335,
     "max": 304.335,
     "quality": "reported",
     "raw": "3.00355044",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.719385,
     "max": 0.719385,
     "quality": "reported",
     "raw": "0.719384828",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/96",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22027B7",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 96,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "PMT 1 Gain: 7.000000",
     "column": "row 0, column PMT 1 Gain: 7.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027B7_data.csv, row 0, column PMT 1 Gain: 7.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 19:33:20:036 ,Experiment: 0,Test Point: 22027B7,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 7.000000,PMT 2 Gain: 7.000000,PMT 3 Gain: 7.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027B7_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "PMT 3 Gain: 7.000000",
     "column": "row 0, column PMT 3 Gain: 7.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027B7_data.csv, row 0, column PMT 3 Gain: 7.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 19:33:20:036 ,Experiment: 0,Test Point: 22027B7,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 7.000000,PMT 2 Gain: 7.000000,PMT 3 Gain: 7.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027B7_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2518.59,
     "max": 2518.59,
     "quality": "reported",
     "raw": "2518.591393",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0984913,
     "max": 0.0984913,
     "quality": "reported",
     "raw": "0.09849131",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.70355,
     "max": 1.70355,
     "quality": "reported",
     "raw": "1.703554604",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 304.473,
     "max": 304.473,
     "quality": "reported",
     "raw": "3.00491136",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.719623,
     "max": 0.719623,
     "quality": "reported",
     "raw": "0.719623437",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/97",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22027D1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 97,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "PMT 1 Gain: 7.000000",
     "column": "row 0, column PMT 1 Gain: 7.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027D1_data.csv, row 0, column PMT 1 Gain: 7.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 19:51:07:915 ,Experiment: 0,Test Point: 22027D1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 7.000000,PMT 2 Gain: 7.000000,PMT 3 Gain: 7.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027D1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "PMT 3 Gain: 7.000000",
     "column": "row 0, column PMT 3 Gain: 7.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027D1_data.csv, row 0, column PMT 3 Gain: 7.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 19:51:07:915 ,Experiment: 0,Test Point: 22027D1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 7.000000,PMT 2 Gain: 7.000000,PMT 3 Gain: 7.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027D1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2332.41,
     "max": 2332.41,
     "quality": "reported",
     "raw": "2332.414473",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.09838,
     "max": 0.09838,
     "quality": "reported",
     "raw": "0.098379987",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.491262,
     "max": 0.491262,
     "quality": "reported",
     "raw": "0.491262479",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.9752,
     "max": 5.9752,
     "quality": "reported",
     "raw": "5.975196875",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 304.542,
     "max": 304.542,
     "quality": "reported",
     "raw": "3.00559182",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.608892,
     "max": 0.608892,
     "quality": "reported",
     "raw": "0.608891809",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/98",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22027D2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 98,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027D2_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 20:23:31:148 ,Experiment: 0,Test Point: 22027D2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027D2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027D2_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 20:23:31:148 ,Experiment: 0,Test Point: 22027D2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027D2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2516.16,
     "max": 2516.16,
     "quality": "reported",
     "raw": "2516.163333",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0981922,
     "max": 0.0981922,
     "quality": "reported",
     "raw": "0.098192232",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.97427,
     "max": 5.97427,
     "quality": "reported",
     "raw": "5.974271311",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 304.748,
     "max": 304.748,
     "quality": "reported",
     "raw": "3.0076332",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.720313,
     "max": 0.720313,
     "quality": "reported",
     "raw": "0.720312566",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/99",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22027D3",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 99,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027D3_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 20:48:41:301 ,Experiment: 0,Test Point: 22027D3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027D3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027D3_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 20:48:41:301 ,Experiment: 0,Test Point: 22027D3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027D3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2514.77,
     "max": 2514.77,
     "quality": "reported",
     "raw": "2514.767438",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0980073,
     "max": 0.0980073,
     "quality": "reported",
     "raw": "0.098007296",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 4.41376,
     "max": 4.41376,
     "quality": "reported",
     "raw": "4.41376341",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 303.783,
     "max": 303.783,
     "quality": "reported",
     "raw": "2.99810676",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.720644,
     "max": 0.720644,
     "quality": "reported",
     "raw": "0.720643535",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/100",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22027D4",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 100,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027D4_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 21:20:02:930 ,Experiment: 0,Test Point: 22027D4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027D4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027D4_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 21:20:02:930 ,Experiment: 0,Test Point: 22027D4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027D4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2513.75,
     "max": 2513.75,
     "quality": "reported",
     "raw": "2513.745464",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0978701,
     "max": 0.0978701,
     "quality": "reported",
     "raw": "0.097870057",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.91549,
     "max": 3.91549,
     "quality": "reported",
     "raw": "3.915485838",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 303.783,
     "max": 303.783,
     "quality": "reported",
     "raw": "2.99810676",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.720919,
     "max": 0.720919,
     "quality": "reported",
     "raw": "0.720919157",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/101",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22027D5",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 101,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "PMT 1 Gain: 7.000000",
     "column": "row 0, column PMT 1 Gain: 7.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027D5_data.csv, row 0, column PMT 1 Gain: 7.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 22:02:29:927 ,Experiment: 0,Test Point: 22027D5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 7.000000,PMT 2 Gain: 7.000000,PMT 3 Gain: 7.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027D5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "PMT 3 Gain: 7.000000",
     "column": "row 0, column PMT 3 Gain: 7.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027D5_data.csv, row 0, column PMT 3 Gain: 7.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 22:02:29:927 ,Experiment: 0,Test Point: 22027D5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 7.000000,PMT 2 Gain: 7.000000,PMT 3 Gain: 7.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027D5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2512.76,
     "max": 2512.76,
     "quality": "reported",
     "raw": "2512.757169",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0977392,
     "max": 0.0977392,
     "quality": "reported",
     "raw": "0.097739223",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.3781,
     "max": 3.3781,
     "quality": "reported",
     "raw": "3.378104495",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 303.783,
     "max": 303.783,
     "quality": "reported",
     "raw": "2.99810676",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.721185,
     "max": 0.721185,
     "quality": "reported",
     "raw": "0.721185226",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/102",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22027D6",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 102,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027D6_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 22:19:09:843 ,Experiment: 0,Test Point: 22027D6,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027D6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027D6_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 22:19:09:843 ,Experiment: 0,Test Point: 22027D6,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027D6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2511.85,
     "max": 2511.85,
     "quality": "reported",
     "raw": "2511.850742",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0976115,
     "max": 0.0976115,
     "quality": "reported",
     "raw": "0.09761147",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.65859,
     "max": 3.65859,
     "quality": "reported",
     "raw": "3.658594414",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 303.921,
     "max": 303.921,
     "quality": "reported",
     "raw": "2.99946768",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.721431,
     "max": 0.721431,
     "quality": "reported",
     "raw": "0.721431381",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/103",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22027B8",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 103,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "PMT 1 Gain: 7.000000",
     "column": "row 0, column PMT 1 Gain: 7.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027B8_data.csv, row 0, column PMT 1 Gain: 7.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 22:42:12:000 ,Experiment: 0,Test Point: 22027B8,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 7.000000,PMT 2 Gain: 7.000000,PMT 3 Gain: 7.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027B8_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "PMT 3 Gain: 7.000000",
     "column": "row 0, column PMT 3 Gain: 7.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027B8_data.csv, row 0, column PMT 3 Gain: 7.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 22:42:12:000 ,Experiment: 0,Test Point: 22027B8,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 7.000000,PMT 2 Gain: 7.000000,PMT 3 Gain: 7.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027B8_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0975002,
     "max": 0.0975002,
     "quality": "reported",
     "raw": "0.09750016",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 303.921,
     "max": 303.921,
     "quality": "reported",
     "raw": "2.99946768",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/104",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22027C1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 104,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "PMT 1 Gain: 7.000000",
     "column": "row 0, column PMT 1 Gain: 7.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027C1_data.csv, row 0, column PMT 1 Gain: 7.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 22:59:58:402 ,Experiment: 0,Test Point: 22027C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 7.000000,PMT 2 Gain: 7.000000,PMT 3 Gain: 7.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "PMT 3 Gain: 7.000000",
     "column": "row 0, column PMT 3 Gain: 7.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027C1_data.csv, row 0, column PMT 3 Gain: 7.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 22:59:58:402 ,Experiment: 0,Test Point: 22027C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 7.000000,PMT 2 Gain: 7.000000,PMT 3 Gain: 7.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2331.11,
     "max": 2331.11,
     "quality": "reported",
     "raw": "2331.109978",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0973932,
     "max": 0.0973932,
     "quality": "reported",
     "raw": "0.097393159",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.498055,
     "max": 0.498055,
     "quality": "reported",
     "raw": "0.498054913",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.37954,
     "max": 3.37954,
     "quality": "reported",
     "raw": "3.379544607",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 303.99,
     "max": 303.99,
     "quality": "reported",
     "raw": "3.00014814",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.614285,
     "max": 0.614285,
     "quality": "reported",
     "raw": "0.614285228",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/105",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22027C2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 105,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "PMT 1 Gain: 7.000000",
     "column": "row 0, column PMT 1 Gain: 7.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027C2_data.csv, row 0, column PMT 1 Gain: 7.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 23:15:10:641 ,Experiment: 0,Test Point: 22027C2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 7.000000,PMT 2 Gain: 7.000000,PMT 3 Gain: 7.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027C2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "PMT 3 Gain: 7.000000",
     "column": "row 0, column PMT 3 Gain: 7.000000",
     "note": "From NASA's file PSI-10_Raw Data_22027C2_data.csv, row 0, column PMT 3 Gain: 7.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-01-27 027 23:15:10:641 ,Experiment: 0,Test Point: 22027C2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 7.000000,PMT 2 Gain: 7.000000,PMT 3 Gain: 7.000000",
     "evidence_source": "file:PSI-10_Raw Data_22027C2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2101.26,
     "max": 2101.26,
     "quality": "reported",
     "raw": "2101.256389",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0972466,
     "max": 0.0972466,
     "quality": "reported",
     "raw": "0.097246616",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.31857,
     "max": 0.31857,
     "quality": "reported",
     "raw": "0.318569512",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.378,
     "max": 3.378,
     "quality": "reported",
     "raw": "3.377998223",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 304.197,
     "max": 304.197,
     "quality": "reported",
     "raw": "3.00218952",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.511011,
     "max": 0.511011,
     "quality": "reported",
     "raw": "0.511011054",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/106",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22035A1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 106,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22035A1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 14:33:38:756 ,Experiment: 0,Test Point: 22035A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035A1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 14:33:38:756 ,Experiment: 0,Test Point: 22035A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2807.56,
     "max": 2807.56,
     "quality": "reported",
     "raw": "2807.564721",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.169802,
     "max": 0.169802,
     "quality": "reported",
     "raw": "0.169801715",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.10935,
     "max": 5.10935,
     "quality": "reported",
     "raw": "5.109348568",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 199.741,
     "max": 199.741,
     "quality": "reported",
     "raw": "1.97129262",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.598238,
     "max": 0.598238,
     "quality": "reported",
     "raw": "0.598238183",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/107",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22035B1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 107,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22035B1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 14:49:00:925 ,Experiment: 0,Test Point: 22035B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035B1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 14:49:00:925 ,Experiment: 0,Test Point: 22035B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2806.94,
     "max": 2806.94,
     "quality": "reported",
     "raw": "2806.937556",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.169543,
     "max": 0.169543,
     "quality": "reported",
     "raw": "0.169542559",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.10985,
     "max": 5.10985,
     "quality": "reported",
     "raw": "5.10985174",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 199.81,
     "max": 199.81,
     "quality": "reported",
     "raw": "1.97197308",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.598624,
     "max": 0.598624,
     "quality": "reported",
     "raw": "0.59862398",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/108",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22035C1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 108,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22035C1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 15:10:17:489 ,Experiment: 0,Test Point: 22035C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035C1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 15:10:17:489 ,Experiment: 0,Test Point: 22035C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2678.33,
     "max": 2678.33,
     "quality": "reported",
     "raw": "2678.32602",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.169257,
     "max": 0.169257,
     "quality": "reported",
     "raw": "0.169257367",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.569104,
     "max": 0.569104,
     "quality": "reported",
     "raw": "0.569103938",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 4.4106,
     "max": 4.4106,
     "quality": "reported",
     "raw": "4.410604459",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 200.017,
     "max": 200.017,
     "quality": "reported",
     "raw": "1.97401446",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.509176,
     "max": 0.509176,
     "quality": "reported",
     "raw": "0.509175624",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/109",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22035D1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 109,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22035D1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 15:25:50:760 ,Experiment: 0,Test Point: 22035D1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035D1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035D1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 15:25:50:760 ,Experiment: 0,Test Point: 22035D1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035D1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2584.07,
     "max": 2584.07,
     "quality": "reported",
     "raw": "2584.071877",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.168973,
     "max": 0.168973,
     "quality": "reported",
     "raw": "0.168972863",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.45589,
     "max": 0.45589,
     "quality": "reported",
     "raw": "0.455889821",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 4.07283,
     "max": 4.07283,
     "quality": "reported",
     "raw": "4.072826663",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 200.086,
     "max": 200.086,
     "quality": "reported",
     "raw": "1.97469492",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.457979,
     "max": 0.457979,
     "quality": "reported",
     "raw": "0.45797913",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/110",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22035D3",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 110,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22035D3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 16:30:25:342 ,Experiment: 0,Test Point: 22035D3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035D3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035D3_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 16:30:25:342 ,Experiment: 0,Test Point: 22035D3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035D3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2582.88,
     "max": 2582.88,
     "quality": "reported",
     "raw": "2582.875102",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.168732,
     "max": 0.168732,
     "quality": "reported",
     "raw": "0.168732157",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.455328,
     "max": 0.455328,
     "quality": "reported",
     "raw": "0.455328049",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 4.07371,
     "max": 4.07371,
     "quality": "reported",
     "raw": "4.073709511",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 200.017,
     "max": 200.017,
     "quality": "reported",
     "raw": "1.97401446",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.458048,
     "max": 0.458048,
     "quality": "reported",
     "raw": "0.458048092",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/111",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22035F1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 111,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22035F1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 17:15:03:362 ,Experiment: 0,Test Point: 22035F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035F1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 17:15:03:362 ,Experiment: 0,Test Point: 22035F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2467.44,
     "max": 2467.44,
     "quality": "reported",
     "raw": "2467.442737",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.168488,
     "max": 0.168488,
     "quality": "reported",
     "raw": "0.168488443",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.364788,
     "max": 0.364788,
     "quality": "reported",
     "raw": "0.36478772",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.71318,
     "max": 3.71318,
     "quality": "reported",
     "raw": "3.713179997",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 200.362,
     "max": 200.362,
     "quality": "reported",
     "raw": "1.97741676",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.407029,
     "max": 0.407029,
     "quality": "reported",
     "raw": "0.407029236",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/112",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22035G1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 112,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22035G1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 17:39:51:221 ,Experiment: 0,Test Point: 22035G1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035G1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035G1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 17:39:51:221 ,Experiment: 0,Test Point: 22035G1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035G1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2322.3,
     "max": 2322.3,
     "quality": "reported",
     "raw": "2322.299242",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.168251,
     "max": 0.168251,
     "quality": "reported",
     "raw": "0.168251344",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.290628,
     "max": 0.290628,
     "quality": "reported",
     "raw": "0.290628255",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.3789,
     "max": 3.3789,
     "quality": "reported",
     "raw": "3.378901961",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 200.431,
     "max": 200.431,
     "quality": "reported",
     "raw": "1.97809722",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.356184,
     "max": 0.356184,
     "quality": "reported",
     "raw": "0.356183583",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/113",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22035G2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 113,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_22035G2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 17:56:54:982 ,Experiment: 0,Test Point: 22035G2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035G2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035G2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 17:56:54:982 ,Experiment: 0,Test Point: 22035G2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035G2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2802.52,
     "max": 2802.52,
     "quality": "reported",
     "raw": "2802.516709",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.168003,
     "max": 0.168003,
     "quality": "reported",
     "raw": "0.168002927",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 8.48682,
     "max": 8.48682,
     "quality": "reported",
     "raw": "8.486816234",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 200.569,
     "max": 200.569,
     "quality": "reported",
     "raw": "1.97945814",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.601427,
     "max": 0.601427,
     "quality": "reported",
     "raw": "0.601426902",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/114",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22035J1",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 114,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035J1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 19:17:52:343 ,Experiment: 0,Test Point: 22035J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 4.000000,PMT 3 Gain: 4.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035J1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "PMT 3 Gain: 4.000000",
     "column": "row 0, column PMT 3 Gain: 4.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035J1_data.csv, row 0, column PMT 3 Gain: 4.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 19:17:52:343 ,Experiment: 0,Test Point: 22035J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 4.000000,PMT 3 Gain: 4.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035J1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2442.2,
     "max": 2442.2,
     "quality": "reported",
     "raw": "2442.201062",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.100786,
     "max": 0.100786,
     "quality": "reported",
     "raw": "0.100785536",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.38049,
     "max": 3.38049,
     "quality": "reported",
     "raw": "3.380492646",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 50.6075,
     "max": 50.6075,
     "quality": "reported",
     "raw": "0.49945764",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.718136,
     "max": 0.718136,
     "quality": "reported",
     "raw": "0.718136116",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/115",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22035J2",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 115,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035J2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 20:20:24:614 ,Experiment: 0,Test Point: 22035J2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035J2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035J2_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 20:20:24:614 ,Experiment: 0,Test Point: 22035J2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035J2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2422.76,
     "max": 2422.76,
     "quality": "reported",
     "raw": "2422.759044",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.09754,
     "max": 0.09754,
     "quality": "reported",
     "raw": "0.09754001",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.11376,
     "max": 5.11376,
     "quality": "reported",
     "raw": "5.113764672",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 51.0212,
     "max": 51.0212,
     "quality": "reported",
     "raw": "0.5035404",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.724559,
     "max": 0.724559,
     "quality": "reported",
     "raw": "0.724559073",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/116",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22035J3",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 116,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035J3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 20:35:04:296 ,Experiment: 0,Test Point: 22035J3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035J3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035J3_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 20:35:04:296 ,Experiment: 0,Test Point: 22035J3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035J3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2409.49,
     "max": 2409.49,
     "quality": "reported",
     "raw": "2409.491562",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0945482,
     "max": 0.0945482,
     "quality": "reported",
     "raw": "0.094548181",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.11189,
     "max": 5.11189,
     "quality": "reported",
     "raw": "5.111885732",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 51.366,
     "max": 51.366,
     "quality": "reported",
     "raw": "0.5069427",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.728775,
     "max": 0.728775,
     "quality": "reported",
     "raw": "0.728775405",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/117",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22035J4",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 117,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035J4_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 20:51:57:958 ,Experiment: 0,Test Point: 22035J4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035J4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035J4_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 20:51:57:958 ,Experiment: 0,Test Point: 22035J4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035J4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2400.28,
     "max": 2400.28,
     "quality": "reported",
     "raw": "2400.278517",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0935053,
     "max": 0.0935053,
     "quality": "reported",
     "raw": "0.093505292",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.11378,
     "max": 5.11378,
     "quality": "reported",
     "raw": "5.113775708",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 51.4349,
     "max": 51.4349,
     "quality": "reported",
     "raw": "0.50762316",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.731619,
     "max": 0.731619,
     "quality": "reported",
     "raw": "0.731619052",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/118",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22035J5",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 118,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035J5_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 21:13:58:313 ,Experiment: 0,Test Point: 22035J5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035J5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035J5_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 21:13:58:313 ,Experiment: 0,Test Point: 22035J5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035J5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2389.38,
     "max": 2389.38,
     "quality": "reported",
     "raw": "2389.383769",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0918533,
     "max": 0.0918533,
     "quality": "reported",
     "raw": "0.091853279",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.38143,
     "max": 3.38143,
     "quality": "reported",
     "raw": "3.381426116",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 51.5728,
     "max": 51.5728,
     "quality": "reported",
     "raw": "0.50898408",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.73489,
     "max": 0.73489,
     "quality": "reported",
     "raw": "0.734890301",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/119",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22035J6",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 119,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035J6_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 21:31:51:883 ,Experiment: 0,Test Point: 22035J6,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035J6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035J6_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 21:31:51:883 ,Experiment: 0,Test Point: 22035J6,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035J6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2376.13,
     "max": 2376.13,
     "quality": "reported",
     "raw": "2376.127357",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.090431,
     "max": 0.090431,
     "quality": "reported",
     "raw": "0.090430951",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.38093,
     "max": 3.38093,
     "quality": "reported",
     "raw": "3.380929996",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 51.7107,
     "max": 51.7107,
     "quality": "reported",
     "raw": "0.510345",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.738782,
     "max": 0.738782,
     "quality": "reported",
     "raw": "0.738782466",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-inverse/120",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "22035J7",
   "source_table": "PSI-10_Experimental table_Flame Design_Inverse Flame.csv",
   "source_row": 120,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035J7_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 22:22:06:656 ,Experiment: 0,Test Point: 22035J7,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035J7_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_22035J7_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2022-02-04 035 22:22:06:656 ,Experiment: 0,Test Point: 22035J7,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_22035J7_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2364.08,
     "max": 2364.08,
     "quality": "reported",
     "raw": "2364.076835",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "context",
     "evidence": "XC2H4 initial",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.0882309,
     "max": 0.0882309,
     "quality": "reported",
     "raw": "0.088230864",
     "column": "XC2H4 initial"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "In an inverse flame the oxidizer flows from the burner into a fuel atmosphere, so this oxygen value is not a cabin-like ambient.",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.849978,
     "max": 0.849978,
     "quality": "reported",
     "raw": "0.849977932",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.37913,
     "max": 3.37913,
     "quality": "reported",
     "raw": "3.379125369",
     "column": "mO2 (mg/s)"
    },
    "pressure_kpa": {
     "min": 51.9175,
     "max": 51.9175,
     "quality": "reported",
     "raw": "0.51238638",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.742189,
     "max": 0.742189,
     "quality": "reported",
     "raw": "0.742188618",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/1",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19115A1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 6.25,
     "max": 6.25,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.250000",
     "column": "row 0, column PMT 1 Gain: 6.250000",
     "note": "From NASA's file PSI-10_Raw Data_19115A1_data.csv, row 0, column PMT 1 Gain: 6.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-25 115 19:20:04:250 ,Experiment: 0,Test Point: 19115A1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.250000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-10_Raw Data_19115A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6.5,
     "max": 6.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.500000",
     "column": "row 0, column PMT 3 Gain: 6.500000",
     "note": "From NASA's file PSI-10_Raw Data_19115A1_data.csv, row 0, column PMT 3 Gain: 6.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-25 115 19:20:04:250 ,Experiment: 0,Test Point: 19115A1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.250000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-10_Raw Data_19115A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2352.14,
     "max": 2352.14,
     "quality": "reported",
     "raw": "2352.144414",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.968954,
     "max": 0.968954,
     "quality": "reported",
     "raw": "0.968953877",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.207128,
     "max": 0.207128,
     "quality": "reported",
     "raw": "0.207128374",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.206203,
     "max": 0.206203,
     "quality": "reported",
     "raw": "0.206202891",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.525,
     "max": 102.525,
     "quality": "reported",
     "raw": "1.01184402",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0627165,
     "max": 0.0627165,
     "quality": "reported",
     "raw": "0.062716477",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/2",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19115D2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 6.25,
     "max": 6.25,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.250000",
     "column": "row 0, column PMT 1 Gain: 6.250000",
     "note": "From NASA's file PSI-10_Raw Data_19115D2_data.csv, row 0, column PMT 1 Gain: 6.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-25 115 20:14:44:137 ,Experiment: 0,Test Point: 19115D2,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.250000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-10_Raw Data_19115D2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6.5,
     "max": 6.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.500000",
     "column": "row 0, column PMT 3 Gain: 6.500000",
     "note": "From NASA's file PSI-10_Raw Data_19115D2_data.csv, row 0, column PMT 3 Gain: 6.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-25 115 20:14:44:137 ,Experiment: 0,Test Point: 19115D2,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.250000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-10_Raw Data_19115D2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMPED",
     "quality": "reported",
     "raw": "RAMPED",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMPED",
     "quality": "reported",
     "raw": "RAMPED",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMPED",
     "quality": "reported",
     "raw": "RAMPED",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.206169,
     "max": 0.206169,
     "quality": "reported",
     "raw": "0.206169206",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.205663,
     "max": 0.205663,
     "quality": "reported",
     "raw": "0.205663073",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.663,
     "max": 102.663,
     "quality": "reported",
     "raw": "1.01320494",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMPED",
     "quality": "reported",
     "raw": "RAMPED",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/3",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19115B1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 3,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 6.25,
     "max": 6.25,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.250000",
     "column": "row 0, column PMT 1 Gain: 6.250000",
     "note": "From NASA's file PSI-10_Raw Data_19115B1_data.csv, row 0, column PMT 1 Gain: 6.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-25 115 20:32:43:415 ,Experiment: 0,Test Point: 19115B1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.250000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-10_Raw Data_19115B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6.5,
     "max": 6.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.500000",
     "column": "row 0, column PMT 3 Gain: 6.500000",
     "note": "From NASA's file PSI-10_Raw Data_19115B1_data.csv, row 0, column PMT 3 Gain: 6.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-25 115 20:32:43:415 ,Experiment: 0,Test Point: 19115B1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.250000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-10_Raw Data_19115B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2345.93,
     "max": 2345.93,
     "quality": "reported",
     "raw": "2345.932123",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.639805,
     "max": 0.639805,
     "quality": "reported",
     "raw": "0.639804819",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.205663,
     "max": 0.205663,
     "quality": "reported",
     "raw": "0.205663073",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.204952,
     "max": 0.204952,
     "quality": "reported",
     "raw": "0.204951718",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.732,
     "max": 102.732,
     "quality": "reported",
     "raw": "1.0138854",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.062341,
     "max": 0.062341,
     "quality": "reported",
     "raw": "0.062341004",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/4",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19115B2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 4,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.250000",
     "column": "row 0, column PMT 1 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19115B2_data.csv, row 0, column PMT 1 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-25 115 21:21:25:709 ,Experiment: 0,Test Point: 19115B2,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.250000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-10_Raw Data_19115B2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_19115B2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-25 115 21:21:25:709 ,Experiment: 0,Test Point: 19115B2,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.250000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-10_Raw Data_19115B2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMPED",
     "quality": "reported",
     "raw": "RAMPED",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMPED",
     "quality": "reported",
     "raw": "RAMPED",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMPED",
     "quality": "reported",
     "raw": "RAMPED",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.204939,
     "max": 0.204939,
     "quality": "reported",
     "raw": "0.204939076",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.204318,
     "max": 0.204318,
     "quality": "reported",
     "raw": "0.20431758",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.663,
     "max": 102.663,
     "quality": "reported",
     "raw": "1.01320494",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMPED",
     "quality": "reported",
     "raw": "RAMPED",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/5",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19115F1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 5,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_19115F1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-25 115 21:42:18:685 ,Experiment: 0,Test Point: 19115F1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.750000,PMT 3 Gain: 5.750000",
     "evidence_source": "file:PSI-10_Raw Data_19115F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.75,
     "max": 5.75,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.750000",
     "column": "row 0, column PMT 3 Gain: 5.750000",
     "note": "From NASA's file PSI-10_Raw Data_19115F1_data.csv, row 0, column PMT 3 Gain: 5.750000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-25 115 21:42:18:685 ,Experiment: 0,Test Point: 19115F1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.750000,PMT 3 Gain: 5.750000",
     "evidence_source": "file:PSI-10_Raw Data_19115F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2186.11,
     "max": 2186.11,
     "quality": "reported",
     "raw": "2186.108871",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.638037,
     "max": 0.638037,
     "quality": "reported",
     "raw": "0.638036948",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.29203,
     "max": 0.29203,
     "quality": "reported",
     "raw": "0.292030339",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.204318,
     "max": 0.204318,
     "quality": "reported",
     "raw": "0.20431758",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.203864,
     "max": 0.203864,
     "quality": "reported",
     "raw": "0.203863566",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.732,
     "max": 102.732,
     "quality": "reported",
     "raw": "1.0138854",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.184576,
     "max": 0.184576,
     "quality": "reported",
     "raw": "0.184576296",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/6",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19115G1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 6,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_19115G1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-25 115 22:18:44:303 ,Experiment: 0,Test Point: 19115G1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.750000,PMT 3 Gain: 5.750000",
     "evidence_source": "file:PSI-10_Raw Data_19115G1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.75,
     "max": 5.75,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.750000",
     "column": "row 0, column PMT 3 Gain: 5.750000",
     "note": "From NASA's file PSI-10_Raw Data_19115G1_data.csv, row 0, column PMT 3 Gain: 5.750000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-25 115 22:18:44:303 ,Experiment: 0,Test Point: 19115G1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.750000,PMT 3 Gain: 5.750000",
     "evidence_source": "file:PSI-10_Raw Data_19115G1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMPED",
     "quality": "reported",
     "raw": "RAMPED",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMPED",
     "quality": "reported",
     "raw": "RAMPED",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMPED",
     "quality": "reported",
     "raw": "RAMPED",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.203864,
     "max": 0.203864,
     "quality": "reported",
     "raw": "0.203863566",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.203513,
     "max": 0.203513,
     "quality": "reported",
     "raw": "0.203513186",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.732,
     "max": 102.732,
     "quality": "reported",
     "raw": "1.0138854",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMPED",
     "quality": "reported",
     "raw": "RAMPED",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/7",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19115K1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 7,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.250000",
     "column": "row 0, column PMT 1 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19115K1_data.csv, row 0, column PMT 1 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-25 115 23:27:55:874 ,Experiment: 0,Test Point: 19115K1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.250000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-10_Raw Data_19115K1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_19115K1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-25 115 23:27:55:874 ,Experiment: 0,Test Point: 19115K1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.250000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-10_Raw Data_19115K1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2179.21,
     "max": 2179.21,
     "quality": "reported",
     "raw": "2179.212411",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.50298,
     "max": 2.50298,
     "quality": "reported",
     "raw": "2.502984026",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.288494,
     "max": 0.288494,
     "quality": "reported",
     "raw": "0.288493924",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.203461,
     "max": 0.203461,
     "quality": "reported",
     "raw": "0.203460708",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.202822,
     "max": 0.202822,
     "quality": "reported",
     "raw": "0.202822015",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.801,
     "max": 102.801,
     "quality": "reported",
     "raw": "1.01456586",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.185731,
     "max": 0.185731,
     "quality": "reported",
     "raw": "0.185731014",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/8",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19115L1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 8,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 4.75,
     "max": 4.75,
     "quality": "reported",
     "raw": "PMT 1 Gain: 4.750000",
     "column": "row 0, column PMT 1 Gain: 4.750000",
     "note": "From NASA's file PSI-10_Raw Data_19115L1_data.csv, row 0, column PMT 1 Gain: 4.750000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-25 115 23:42:14:554 ,Experiment: 0,Test Point: 19115L1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 4.750000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_19115L1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19115L1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-25 115 23:42:14:554 ,Experiment: 0,Test Point: 19115L1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 4.750000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-10_Raw Data_19115L1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2332.35,
     "max": 2332.35,
     "quality": "reported",
     "raw": "2332.354419",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.51475,
     "max": 2.51475,
     "quality": "reported",
     "raw": "2.514750555",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.202822,
     "max": 0.202822,
     "quality": "reported",
     "raw": "0.202822015",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.201906,
     "max": 0.201906,
     "quality": "reported",
     "raw": "0.201905747",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.939,
     "max": 102.939,
     "quality": "reported",
     "raw": "1.01592678",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0615258,
     "max": 0.0615258,
     "quality": "reported",
     "raw": "0.061525773",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/9",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19115N1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 9,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19115N1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-26 116 01:04:44:706 ,Experiment: 0,Test Point: 19115N1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19115N1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19115N1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-26 116 01:04:44:706 ,Experiment: 0,Test Point: 19115N1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19115N1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2260.55,
     "max": 2260.55,
     "quality": "reported",
     "raw": "2260.545079",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.50366,
     "max": 2.50366,
     "quality": "reported",
     "raw": "2.503660919",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.48393,
     "max": 0.48393,
     "quality": "reported",
     "raw": "0.483929551",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.201883,
     "max": 0.201883,
     "quality": "reported",
     "raw": "0.201883189",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.201368,
     "max": 0.201368,
     "quality": "reported",
     "raw": "0.201368251",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.87,
     "max": 102.87,
     "quality": "reported",
     "raw": "1.01524632",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.118937,
     "max": 0.118937,
     "quality": "reported",
     "raw": "0.118937002",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/10",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19115M4",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 10,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.250000",
     "column": "row 0, column PMT 1 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19115M4_data.csv, row 0, column PMT 1 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-26 116 01:32:27:446 ,Experiment: 0,Test Point: 19115M4,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.250000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-10_Raw Data_19115M4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_19115M4_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-26 116 01:32:27:446 ,Experiment: 0,Test Point: 19115M4,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.250000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-10_Raw Data_19115M4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2260.82,
     "max": 2260.82,
     "quality": "reported",
     "raw": "2260.822619",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.638383,
     "max": 0.638383,
     "quality": "reported",
     "raw": "0.63838319",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.49392,
     "max": 0.49392,
     "quality": "reported",
     "raw": "0.493919981",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.201357,
     "max": 0.201357,
     "quality": "reported",
     "raw": "0.201357214",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.200879,
     "max": 0.200879,
     "quality": "reported",
     "raw": "0.20087857",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.939,
     "max": 102.939,
     "quality": "reported",
     "raw": "1.01592678",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.11656,
     "max": 0.11656,
     "quality": "reported",
     "raw": "0.116559644",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/11",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19115Q1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 11,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_19115Q1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-26 116 02:09:05:564 ,Experiment: 0,Test Point: 19115Q1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.750000,PMT 3 Gain: 5.750000",
     "evidence_source": "file:PSI-10_Raw Data_19115Q1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.75,
     "max": 5.75,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.750000",
     "column": "row 0, column PMT 3 Gain: 5.750000",
     "note": "From NASA's file PSI-10_Raw Data_19115Q1_data.csv, row 0, column PMT 3 Gain: 5.750000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-04-26 116 02:09:05:564 ,Experiment: 0,Test Point: 19115Q1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.750000,PMT 3 Gain: 5.750000",
     "evidence_source": "file:PSI-10_Raw Data_19115Q1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2324.1,
     "max": 2324.1,
     "quality": "reported",
     "raw": "2324.097655",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.802256,
     "max": 0.802256,
     "quality": "reported",
     "raw": "0.802256055",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.200867,
     "max": 0.200867,
     "quality": "reported",
     "raw": "0.200867151",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.200399,
     "max": 0.200399,
     "quality": "reported",
     "raw": "0.200398938",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.008,
     "max": 103.008,
     "quality": "reported",
     "raw": "1.01660724",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0610454,
     "max": 0.0610454,
     "quality": "reported",
     "raw": "0.061045429",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/12",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19123A1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 12,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19123A1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-03 123 20:32:50:271 ,Experiment: 0,Test Point: 19123A1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19123A1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-03 123 20:32:50:271 ,Experiment: 0,Test Point: 19123A1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2364.43,
     "max": 2364.43,
     "quality": "reported",
     "raw": "2364.426559",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.62659,
     "max": 1.62659,
     "quality": "reported",
     "raw": "1.626588386",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.209829,
     "max": 0.209829,
     "quality": "reported",
     "raw": "0.209828781",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.209192,
     "max": 0.209192,
     "quality": "reported",
     "raw": "0.20919187",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.629,
     "max": 101.629,
     "quality": "reported",
     "raw": "1.00299804",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0635014,
     "max": 0.0635014,
     "quality": "reported",
     "raw": "0.063501438",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/13",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19123A2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 13,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19123A2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-03 123 20:47:28:132 ,Experiment: 0,Test Point: 19123A2,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19123A2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-03 123 20:47:28:132 ,Experiment: 0,Test Point: 19123A2,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2361.76,
     "max": 2361.76,
     "quality": "reported",
     "raw": "2361.762282",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.62568,
     "max": 1.62568,
     "quality": "reported",
     "raw": "1.625676881",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.209192,
     "max": 0.209192,
     "quality": "reported",
     "raw": "0.20919187",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.208581,
     "max": 0.208581,
     "quality": "reported",
     "raw": "0.208580728",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.111,
     "max": 102.111,
     "quality": "reported",
     "raw": "1.00776126",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0633294,
     "max": 0.0633294,
     "quality": "reported",
     "raw": "0.063329411",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/14",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19123A3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 14,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19123A3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-03 123 21:03:15:886 ,Experiment: 0,Test Point: 19123A3,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19123A3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-03 123 21:03:15:886 ,Experiment: 0,Test Point: 19123A3,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2359.15,
     "max": 2359.15,
     "quality": "reported",
     "raw": "2359.146427",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.62635,
     "max": 1.62635,
     "quality": "reported",
     "raw": "1.626350821",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.208581,
     "max": 0.208581,
     "quality": "reported",
     "raw": "0.208580728",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.207973,
     "max": 0.207973,
     "quality": "reported",
     "raw": "0.207973375",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.18,
     "max": 102.18,
     "quality": "reported",
     "raw": "1.00844172",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0631614,
     "max": 0.0631614,
     "quality": "reported",
     "raw": "0.063161368",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/15",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19123A4",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 15,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19123A4_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-03 123 21:19:29:243 ,Experiment: 0,Test Point: 19123A4,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123A4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19123A4_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-03 123 21:19:29:243 ,Experiment: 0,Test Point: 19123A4,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123A4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2356.47,
     "max": 2356.47,
     "quality": "reported",
     "raw": "2356.472075",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.62562,
     "max": 1.62562,
     "quality": "reported",
     "raw": "1.625622486",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.207973,
     "max": 0.207973,
     "quality": "reported",
     "raw": "0.207973375",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.20738,
     "max": 0.20738,
     "quality": "reported",
     "raw": "0.207379511",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.663,
     "max": 102.663,
     "quality": "reported",
     "raw": "1.01320494",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0629956,
     "max": 0.0629956,
     "quality": "reported",
     "raw": "0.062995621",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/16",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19123C1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 16,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19123C1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-03 123 21:47:57:224 ,Experiment: 0,Test Point: 19123C1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19123C1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-03 123 21:47:57:224 ,Experiment: 0,Test Point: 19123C1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2197.58,
     "max": 2197.58,
     "quality": "reported",
     "raw": "2197.57711",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.29672,
     "max": 1.29672,
     "quality": "reported",
     "raw": "1.29671751",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.290054,
     "max": 0.290054,
     "quality": "reported",
     "raw": "0.290053768",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.20738,
     "max": 0.20738,
     "quality": "reported",
     "raw": "0.207379511",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.20667,
     "max": 0.20667,
     "quality": "reported",
     "raw": "0.20666972",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.249,
     "max": 102.249,
     "quality": "reported",
     "raw": "1.00912218",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.187706,
     "max": 0.187706,
     "quality": "reported",
     "raw": "0.18770577",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/17",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19123F1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 17,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19123F1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-03 123 22:09:47:867 ,Experiment: 0,Test Point: 19123F1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19123F1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-03 123 22:09:47:867 ,Experiment: 0,Test Point: 19123F1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2283.59,
     "max": 2283.59,
     "quality": "reported",
     "raw": "2283.586332",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.29584,
     "max": 1.29584,
     "quality": "reported",
     "raw": "1.295839719",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.488968,
     "max": 0.488968,
     "quality": "reported",
     "raw": "0.488967651",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.20667,
     "max": 0.20667,
     "quality": "reported",
     "raw": "0.20666972",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.206084,
     "max": 0.206084,
     "quality": "reported",
     "raw": "0.206083892",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.525,
     "max": 102.525,
     "quality": "reported",
     "raw": "1.01184402",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.120229,
     "max": 0.120229,
     "quality": "reported",
     "raw": "0.12022924",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/18",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19123F2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 18,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19123F2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-03 123 22:45:18:875 ,Experiment: 0,Test Point: 19123F2,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123F2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19123F2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-03 123 22:45:18:875 ,Experiment: 0,Test Point: 19123F2,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123F2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2280.79,
     "max": 2280.79,
     "quality": "reported",
     "raw": "2280.79265",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.29657,
     "max": 1.29657,
     "quality": "reported",
     "raw": "1.296571078",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.488442,
     "max": 0.488442,
     "quality": "reported",
     "raw": "0.48844154",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.206084,
     "max": 0.206084,
     "quality": "reported",
     "raw": "0.206083892",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.205485,
     "max": 0.205485,
     "quality": "reported",
     "raw": "0.205485391",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.594,
     "max": 102.594,
     "quality": "reported",
     "raw": "1.01252448",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.120048,
     "max": 0.120048,
     "quality": "reported",
     "raw": "0.120047982",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/19",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19123F3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 19,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19123F3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-03 123 23:03:32:578 ,Experiment: 0,Test Point: 19123F3,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123F3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19123F3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-03 123 23:03:32:578 ,Experiment: 0,Test Point: 19123F3,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123F3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2278.5,
     "max": 2278.5,
     "quality": "reported",
     "raw": "2278.4985",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.2938,
     "max": 1.2938,
     "quality": "reported",
     "raw": "1.29379912",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.489013,
     "max": 0.489013,
     "quality": "reported",
     "raw": "0.489013327",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.205485,
     "max": 0.205485,
     "quality": "reported",
     "raw": "0.205485391",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.204989,
     "max": 0.204989,
     "quality": "reported",
     "raw": "0.20498867",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.732,
     "max": 102.732,
     "quality": "reported",
     "raw": "1.0138854",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.119652,
     "max": 0.119652,
     "quality": "reported",
     "raw": "0.119651505",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/20",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19123K1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 20,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19123K1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-03 123 23:45:27:769 ,Experiment: 0,Test Point: 19123K1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123K1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19123K1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-03 123 23:45:27:769 ,Experiment: 0,Test Point: 19123K1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123K1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2100.75,
     "max": 2100.75,
     "quality": "reported",
     "raw": "2100.74935",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.29689,
     "max": 1.29689,
     "quality": "reported",
     "raw": "1.296892511",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.206177,
     "max": 0.206177,
     "quality": "reported",
     "raw": "0.206176659",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.204908,
     "max": 0.204908,
     "quality": "reported",
     "raw": "0.204907733",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.204429,
     "max": 0.204429,
     "quality": "reported",
     "raw": "0.204429245",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.801,
     "max": 102.801,
     "quality": "reported",
     "raw": "1.01456586",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.243281,
     "max": 0.243281,
     "quality": "reported",
     "raw": "0.243281303",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/21",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19123B1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 21,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19123B1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-04 124 00:01:29:034 ,Experiment: 0,Test Point: 19123B1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19123B1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-04 124 00:01:29:034 ,Experiment: 0,Test Point: 19123B1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2183.61,
     "max": 2183.61,
     "quality": "reported",
     "raw": "2183.610185",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5007,
     "max": 2.5007,
     "quality": "reported",
     "raw": "2.500696737",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.288436,
     "max": 0.288436,
     "quality": "reported",
     "raw": "0.28843596",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.204429,
     "max": 0.204429,
     "quality": "reported",
     "raw": "0.204429245",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.203807,
     "max": 0.203807,
     "quality": "reported",
     "raw": "0.203807321",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.939,
     "max": 102.939,
     "quality": "reported",
     "raw": "1.01592678",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.186468,
     "max": 0.186468,
     "quality": "reported",
     "raw": "0.186467574",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/22",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19123D1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 22,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19123D1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-04 124 00:25:59:980 ,Experiment: 0,Test Point: 19123D1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123D1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19123D1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-04 124 00:25:59:980 ,Experiment: 0,Test Point: 19123D1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123D1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2269.28,
     "max": 2269.28,
     "quality": "reported",
     "raw": "2269.282199",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.50119,
     "max": 2.50119,
     "quality": "reported",
     "raw": "2.501190411",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.483531,
     "max": 0.483531,
     "quality": "reported",
     "raw": "0.483530736",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.203807,
     "max": 0.203807,
     "quality": "reported",
     "raw": "0.203807321",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.203228,
     "max": 0.203228,
     "quality": "reported",
     "raw": "0.20322776",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.008,
     "max": 103.008,
     "quality": "reported",
     "raw": "1.01660724",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.119978,
     "max": 0.119978,
     "quality": "reported",
     "raw": "0.119978447",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/23",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19123J1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 23,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19123J1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-04 124 00:38:29:243 ,Experiment: 0,Test Point: 19123J1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123J1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19123J1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-04 124 00:38:29:243 ,Experiment: 0,Test Point: 19123J1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123J1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2091.89,
     "max": 2091.89,
     "quality": "reported",
     "raw": "2091.888636",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.50125,
     "max": 2.50125,
     "quality": "reported",
     "raw": "2.501246811",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.205392,
     "max": 0.205392,
     "quality": "reported",
     "raw": "0.205391604",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.203228,
     "max": 0.203228,
     "quality": "reported",
     "raw": "0.20322776",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.202551,
     "max": 0.202551,
     "quality": "reported",
     "raw": "0.202550678",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.077,
     "max": 103.077,
     "quality": "reported",
     "raw": "1.0172877",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.242423,
     "max": 0.242423,
     "quality": "reported",
     "raw": "0.242422701",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/24",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19123L1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 24,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19123L1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-04 124 00:57:41:299 ,Experiment: 0,Test Point: 19123L1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123L1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19123L1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-04 124 00:57:41:299 ,Experiment: 0,Test Point: 19123L1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123L1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2331.57,
     "max": 2331.57,
     "quality": "reported",
     "raw": "2331.574241",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.50582,
     "max": 2.50582,
     "quality": "reported",
     "raw": "2.505824974",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.202551,
     "max": 0.202551,
     "quality": "reported",
     "raw": "0.202550678",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.201833,
     "max": 0.201833,
     "quality": "reported",
     "raw": "0.201832917",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.215,
     "max": 103.215,
     "quality": "reported",
     "raw": "1.01864862",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.061478,
     "max": 0.061478,
     "quality": "reported",
     "raw": "0.061478048",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/25",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19123L2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 25,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19123L2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-04 124 01:11:44:167 ,Experiment: 0,Test Point: 19123L2,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123L2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19123L2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-04 124 01:11:44:167 ,Experiment: 0,Test Point: 19123L2,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123L2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2328.2,
     "max": 2328.2,
     "quality": "reported",
     "raw": "2328.203112",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.50471,
     "max": 2.50471,
     "quality": "reported",
     "raw": "2.504707939",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.201833,
     "max": 0.201833,
     "quality": "reported",
     "raw": "0.201832917",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.201123,
     "max": 0.201123,
     "quality": "reported",
     "raw": "0.201123228",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.284,
     "max": 103.284,
     "quality": "reported",
     "raw": "1.01932908",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.06128,
     "max": 0.06128,
     "quality": "reported",
     "raw": "0.061280032",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/26",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19123L3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 26,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19123L3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-04 124 01:51:03:121 ,Experiment: 0,Test Point: 19123L3,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123L3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19123L3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-04 124 01:51:03:121 ,Experiment: 0,Test Point: 19123L3,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123L3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.201123,
     "max": 0.201123,
     "quality": "reported",
     "raw": "0.201123228",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.200536,
     "max": 0.200536,
     "quality": "reported",
     "raw": "0.200535703",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.284,
     "max": 103.284,
     "quality": "reported",
     "raw": "1.01932908",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/27",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19123L4",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 27,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19123L4_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-04 124 02:16:39:701 ,Experiment: 0,Test Point: 19123L4,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123L4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19123L4_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-04 124 02:16:39:701 ,Experiment: 0,Test Point: 19123L4,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123L4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.200536,
     "max": 0.200536,
     "quality": "reported",
     "raw": "0.200535703",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.200108,
     "max": 0.200108,
     "quality": "reported",
     "raw": "0.200108197",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.352,
     "max": 103.352,
     "quality": "reported",
     "raw": "1.02000954",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/28",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19123L5",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 28,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19123L5_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-04 124 02:37:45:852 ,Experiment: 0,Test Point: 19123L5,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123L5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19123L5_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-04 124 02:37:45:852 ,Experiment: 0,Test Point: 19123L5,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123L5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.200108,
     "max": 0.200108,
     "quality": "reported",
     "raw": "0.200108197",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.199796,
     "max": 0.199796,
     "quality": "reported",
     "raw": "0.199796361",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.352,
     "max": 103.352,
     "quality": "reported",
     "raw": "1.02000954",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/29",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19123L6",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 29,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19123L6_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-04 124 02:52:49:999 ,Experiment: 0,Test Point: 19123L6,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123L6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19123L6_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-04 124 02:52:49:999 ,Experiment: 0,Test Point: 19123L6,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123L6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.199796,
     "max": 0.199796,
     "quality": "reported",
     "raw": "0.199796361",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.199416,
     "max": 0.199416,
     "quality": "reported",
     "raw": "0.199415737",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.352,
     "max": 103.352,
     "quality": "reported",
     "raw": "1.02000954",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/30",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19123L7",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 30,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19123L7_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-04 124 03:06:48:668 ,Experiment: 0,Test Point: 19123L7,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123L7_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19123L7_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-04 124 03:06:48:668 ,Experiment: 0,Test Point: 19123L7,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 2,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19123L7_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.199416,
     "max": 0.199416,
     "quality": "reported",
     "raw": "0.199415737",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.199167,
     "max": 0.199167,
     "quality": "reported",
     "raw": "0.199166976",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.284,
     "max": 103.284,
     "quality": "reported",
     "raw": "1.01932908",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/31",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19137A1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 31,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19137A1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 17:29:55:055 ,Experiment: 0,Test Point: 19137A1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19137A1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 17:29:55:055 ,Experiment: 0,Test Point: 19137A1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2365.98,
     "max": 2365.98,
     "quality": "reported",
     "raw": "2365.978278",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.94181,
     "max": 1.94181,
     "quality": "reported",
     "raw": "1.941813707",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.210188,
     "max": 0.210188,
     "quality": "reported",
     "raw": "0.210188478",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.209521,
     "max": 0.209521,
     "quality": "reported",
     "raw": "0.209521205",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.698,
     "max": 101.698,
     "quality": "reported",
     "raw": "1.0036785",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0635964,
     "max": 0.0635964,
     "quality": "reported",
     "raw": "0.063596373",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/32",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19137B1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 32,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19137B1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 17:56:00:298 ,Experiment: 0,Test Point: 19137B1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19137B1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 17:56:00:298 ,Experiment: 0,Test Point: 19137B1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2294.58,
     "max": 2294.58,
     "quality": "reported",
     "raw": "2294.580179",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.9421,
     "max": 1.9421,
     "quality": "reported",
     "raw": "1.942101466",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.485087,
     "max": 0.485087,
     "quality": "reported",
     "raw": "0.485086654",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.209521,
     "max": 0.209521,
     "quality": "reported",
     "raw": "0.209521205",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.208724,
     "max": 0.208724,
     "quality": "reported",
     "raw": "0.208724327",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.698,
     "max": 101.698,
     "quality": "reported",
     "raw": "1.0036785",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.122447,
     "max": 0.122447,
     "quality": "reported",
     "raw": "0.122447386",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/33",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19137C1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 33,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "adiabatic_flame_temp_k": {
     "min": 2202.61,
     "max": 2202.61,
     "quality": "reported",
     "raw": "2202.608744",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.9425,
     "max": 1.9425,
     "quality": "reported",
     "raw": "1.942499787",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.28897,
     "max": 0.28897,
     "quality": "reported",
     "raw": "0.28896973",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.208724,
     "max": 0.208724,
     "quality": "reported",
     "raw": "0.208724327",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.208021,
     "max": 0.208021,
     "quality": "reported",
     "raw": "0.208021363",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.836,
     "max": 101.836,
     "quality": "reported",
     "raw": "1.00503942",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.189243,
     "max": 0.189243,
     "quality": "reported",
     "raw": "0.189242716",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/34",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19137D1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 34,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19137D1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 18:26:58:853 ,Experiment: 0,Test Point: 19137D1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137D1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19137D1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 18:26:58:853 ,Experiment: 0,Test Point: 19137D1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137D1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2113.27,
     "max": 2113.27,
     "quality": "reported",
     "raw": "2113.26725",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.94255,
     "max": 1.94255,
     "quality": "reported",
     "raw": "1.942548354",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.206065,
     "max": 0.206065,
     "quality": "reported",
     "raw": "0.206064938",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.208021,
     "max": 0.208021,
     "quality": "reported",
     "raw": "0.208021363",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.207275,
     "max": 0.207275,
     "quality": "reported",
     "raw": "0.207274975",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.905,
     "max": 101.905,
     "quality": "reported",
     "raw": "1.00571988",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.245976,
     "max": 0.245976,
     "quality": "reported",
     "raw": "0.245975848",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/35",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19137F1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 35,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19137F1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 18:49:10:409 ,Experiment: 0,Test Point: 19137F1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19137F1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 18:49:10:409 ,Experiment: 0,Test Point: 19137F1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2042.74,
     "max": 2042.74,
     "quality": "reported",
     "raw": "2042.737923",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.93637,
     "max": 1.93637,
     "quality": "reported",
     "raw": "1.936365763",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.167253,
     "max": 0.167253,
     "quality": "reported",
     "raw": "0.167253386",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.207275,
     "max": 0.207275,
     "quality": "reported",
     "raw": "0.207274975",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.206583,
     "max": 0.206583,
     "quality": "reported",
     "raw": "0.206583339",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.042,
     "max": 102.042,
     "quality": "reported",
     "raw": "1.0070808",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.286003,
     "max": 0.286003,
     "quality": "reported",
     "raw": "0.286002577",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/36",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19137F2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 36,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19137F2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 19:03:49:777 ,Experiment: 0,Test Point: 19137F2,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137F2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19137F2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 19:03:49:777 ,Experiment: 0,Test Point: 19137F2,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137F2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2006.54,
     "max": 2006.54,
     "quality": "reported",
     "raw": "2006.54149",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.62294,
     "max": 1.62294,
     "quality": "reported",
     "raw": "1.622935861",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.152602,
     "max": 0.152602,
     "quality": "reported",
     "raw": "0.152601931",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.206583,
     "max": 0.206583,
     "quality": "reported",
     "raw": "0.206583339",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.205935,
     "max": 0.205935,
     "quality": "reported",
     "raw": "0.205935113",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.111,
     "max": 102.111,
     "quality": "reported",
     "raw": "1.00776126",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.304417,
     "max": 0.304417,
     "quality": "reported",
     "raw": "0.304417155",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/37",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19137F3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 37,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19137F3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 19:20:56:746 ,Experiment: 0,Test Point: 19137F3,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137F3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19137F3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 19:20:56:746 ,Experiment: 0,Test Point: 19137F3,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137F3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2003.47,
     "max": 2003.47,
     "quality": "reported",
     "raw": "2003.466901",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.61864,
     "max": 1.61864,
     "quality": "reported",
     "raw": "1.618636731",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.152359,
     "max": 0.152359,
     "quality": "reported",
     "raw": "0.152358888",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.205935,
     "max": 0.205935,
     "quality": "reported",
     "raw": "0.205935113",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.205363,
     "max": 0.205363,
     "quality": "reported",
     "raw": "0.205363297",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.249,
     "max": 102.249,
     "quality": "reported",
     "raw": "1.00912218",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.304145,
     "max": 0.304145,
     "quality": "reported",
     "raw": "0.304145478",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/38",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19137G1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 38,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19137G1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 19:36:27:104 ,Experiment: 0,Test Point: 19137G1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137G1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19137G1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 19:36:27:104 ,Experiment: 0,Test Point: 19137G1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137G1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.205363,
     "max": 0.205363,
     "quality": "reported",
     "raw": "0.205363297",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.204891,
     "max": 0.204891,
     "quality": "reported",
     "raw": "0.204891116",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.318,
     "max": 102.318,
     "quality": "reported",
     "raw": "1.00980264",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/39",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19137H1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 39,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19137H1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 20:07:20:254 ,Experiment: 0,Test Point: 19137H1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137H1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19137H1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 20:07:20:254 ,Experiment: 0,Test Point: 19137H1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137H1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.204891,
     "max": 0.204891,
     "quality": "reported",
     "raw": "0.204891116",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.204442,
     "max": 0.204442,
     "quality": "reported",
     "raw": "0.204441536",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.456,
     "max": 102.456,
     "quality": "reported",
     "raw": "1.01116356",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/40",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19137J1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 40,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19137J1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 20:33:31:597 ,Experiment: 0,Test Point: 19137J1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137J1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19137J1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 20:33:31:597 ,Experiment: 0,Test Point: 19137J1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137J1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.204442,
     "max": 0.204442,
     "quality": "reported",
     "raw": "0.204441536",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.204017,
     "max": 0.204017,
     "quality": "reported",
     "raw": "0.20401684",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.456,
     "max": 102.456,
     "quality": "reported",
     "raw": "1.01116356",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/41",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19137K1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 41,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19137K1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 20:53:44:857 ,Experiment: 0,Test Point: 19137K1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137K1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19137K1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 20:53:44:857 ,Experiment: 0,Test Point: 19137K1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137K1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.204017,
     "max": 0.204017,
     "quality": "reported",
     "raw": "0.20401684",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.203628,
     "max": 0.203628,
     "quality": "reported",
     "raw": "0.203628498",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.387,
     "max": 102.387,
     "quality": "reported",
     "raw": "1.0104831",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/42",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19137K2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 42,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19137K2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 21:15:29:631 ,Experiment: 0,Test Point: 19137K2,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137K2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19137K2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 21:15:29:631 ,Experiment: 0,Test Point: 19137K2,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137K2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.203628,
     "max": 0.203628,
     "quality": "reported",
     "raw": "0.203628498",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.203231,
     "max": 0.203231,
     "quality": "reported",
     "raw": "0.203230898",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.456,
     "max": 102.456,
     "quality": "reported",
     "raw": "1.01116356",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/43",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19137L1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 43,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19137L1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 21:38:08:073 ,Experiment: 0,Test Point: 19137L1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137L1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19137L1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 21:38:08:073 ,Experiment: 0,Test Point: 19137L1,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137L1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2268.78,
     "max": 2268.78,
     "quality": "reported",
     "raw": "2268.778077",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.96314,
     "max": 0.96314,
     "quality": "reported",
     "raw": "0.963140452",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.490751,
     "max": 0.490751,
     "quality": "reported",
     "raw": "0.490751453",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.203231,
     "max": 0.203231,
     "quality": "reported",
     "raw": "0.203230898",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.202842,
     "max": 0.202842,
     "quality": "reported",
     "raw": "0.202842409",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.456,
     "max": 102.456,
     "quality": "reported",
     "raw": "1.01116356",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.118182,
     "max": 0.118182,
     "quality": "reported",
     "raw": "0.118182393",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/44",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19137L2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 44,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19137L2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 22:49:25:752 ,Experiment: 0,Test Point: 19137L2,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137L2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19137L2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 22:49:25:752 ,Experiment: 0,Test Point: 19137L2,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137L2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.202842,
     "max": 0.202842,
     "quality": "reported",
     "raw": "0.202842409",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.202393,
     "max": 0.202393,
     "quality": "reported",
     "raw": "0.202392691",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.456,
     "max": 102.456,
     "quality": "reported",
     "raw": "1.01116356",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/45",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19137L3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 45,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19137L3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 23:07:29:419 ,Experiment: 0,Test Point: 19137L3,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137L3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19137L3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 23:07:29:419 ,Experiment: 0,Test Point: 19137L3,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137L3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.202393,
     "max": 0.202393,
     "quality": "reported",
     "raw": "0.202392691",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.201997,
     "max": 0.201997,
     "quality": "reported",
     "raw": "0.201997282",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.594,
     "max": 102.594,
     "quality": "reported",
     "raw": "1.01252448",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/46",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19137L4",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 46,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19137L4_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 23:23:47:977 ,Experiment: 0,Test Point: 19137L4,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137L4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19137L4_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 23:23:47:977 ,Experiment: 0,Test Point: 19137L4,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137L4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.201997,
     "max": 0.201997,
     "quality": "reported",
     "raw": "0.201997282",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.201642,
     "max": 0.201642,
     "quality": "reported",
     "raw": "0.201642461",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.663,
     "max": 102.663,
     "quality": "reported",
     "raw": "1.01320494",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/47",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19137L5",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 47,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19137L5_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 23:57:18:620 ,Experiment: 0,Test Point: 19137L5,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137L5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19137L5_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-17 137 23:57:18:620 ,Experiment: 0,Test Point: 19137L5,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137L5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.201642,
     "max": 0.201642,
     "quality": "reported",
     "raw": "0.201642461",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.20133,
     "max": 0.20133,
     "quality": "reported",
     "raw": "0.201330073",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.594,
     "max": 102.594,
     "quality": "reported",
     "raw": "1.01252448",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/48",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19137L6",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 48,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19137L6_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-18 138 00:24:55:762 ,Experiment: 0,Test Point: 19137L6,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137L6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19137L6_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-18 138 00:24:55:762 ,Experiment: 0,Test Point: 19137L6,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137L6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.20133,
     "max": 0.20133,
     "quality": "reported",
     "raw": "0.201330073",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.20088,
     "max": 0.20088,
     "quality": "reported",
     "raw": "0.200879825",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.594,
     "max": 102.594,
     "quality": "reported",
     "raw": "1.01252448",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/49",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19137L7",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 49,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19137L7_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-18 138 00:37:52:447 ,Experiment: 0,Test Point: 19137L7,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137L7_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19137L7_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-18 138 00:37:52:447 ,Experiment: 0,Test Point: 19137L7,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137L7_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2257.84,
     "max": 2257.84,
     "quality": "reported",
     "raw": "2257.839227",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.964454,
     "max": 0.964454,
     "quality": "reported",
     "raw": "0.964454393",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.491154,
     "max": 0.491154,
     "quality": "reported",
     "raw": "0.491154307",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.20088,
     "max": 0.20088,
     "quality": "reported",
     "raw": "0.200879825",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.200458,
     "max": 0.200458,
     "quality": "reported",
     "raw": "0.200458311",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.663,
     "max": 102.663,
     "quality": "reported",
     "raw": "1.01320494",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.116915,
     "max": 0.116915,
     "quality": "reported",
     "raw": "0.116914687",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/50",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19137L8",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 50,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19137L8_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-18 138 00:51:49:120 ,Experiment: 0,Test Point: 19137L8,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137L8_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19137L8_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-18 138 00:51:49:120 ,Experiment: 0,Test Point: 19137L8,MFCA1 Gas: 0,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19137L8_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.200458,
     "max": 0.200458,
     "quality": "reported",
     "raw": "0.200458311",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.20004,
     "max": 0.20004,
     "quality": "reported",
     "raw": "0.200039988",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.732,
     "max": 102.732,
     "quality": "reported",
     "raw": "1.0138854",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/51",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19142G1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 51,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19142G1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-22 142 16:26:33:540 ,Experiment: 0,Test Point: 19142G1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19142G1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19142G1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-22 142 16:26:33:540 ,Experiment: 0,Test Point: 19142G1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19142G1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.396946,
     "max": 0.396946,
     "quality": "reported",
     "raw": "0.396945546",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.389986,
     "max": 0.389986,
     "quality": "reported",
     "raw": "0.389985715",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.111,
     "max": 102.111,
     "quality": "reported",
     "raw": "1.00776126",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/52",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19142G2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 52,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19142G2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-22 142 16:42:22:670 ,Experiment: 0,Test Point: 19142G2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19142G2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19142G2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-22 142 16:42:22:670 ,Experiment: 0,Test Point: 19142G2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19142G2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.389986,
     "max": 0.389986,
     "quality": "reported",
     "raw": "0.389985715",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.383798,
     "max": 0.383798,
     "quality": "reported",
     "raw": "0.38379786",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.594,
     "max": 102.594,
     "quality": "reported",
     "raw": "1.01252448",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/53",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19142G3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 53,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19142G3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-22 142 17:06:27:651 ,Experiment: 0,Test Point: 19142G3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19142G3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19142G3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-22 142 17:06:27:651 ,Experiment: 0,Test Point: 19142G3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19142G3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.383798,
     "max": 0.383798,
     "quality": "reported",
     "raw": "0.38379786",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.378755,
     "max": 0.378755,
     "quality": "reported",
     "raw": "0.378755156",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.008,
     "max": 103.008,
     "quality": "reported",
     "raw": "1.01660724",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/54",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19142F1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 54,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19142F1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-22 142 17:20:21:202 ,Experiment: 0,Test Point: 19142F1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19142F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19142F1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-22 142 17:20:21:202 ,Experiment: 0,Test Point: 19142F1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19142F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.378755,
     "max": 0.378755,
     "quality": "reported",
     "raw": "0.378755156",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.373169,
     "max": 0.373169,
     "quality": "reported",
     "raw": "0.373169325",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.352,
     "max": 103.352,
     "quality": "reported",
     "raw": "1.02000954",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/55",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19142J2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 55,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19142J2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-22 142 17:56:43:630 ,Experiment: 0,Test Point: 19142J2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19142J2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19142J2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-22 142 17:56:43:630 ,Experiment: 0,Test Point: 19142J2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19142J2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.373169,
     "max": 0.373169,
     "quality": "reported",
     "raw": "0.373169325",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.368986,
     "max": 0.368986,
     "quality": "reported",
     "raw": "0.368985932",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.904,
     "max": 103.904,
     "quality": "reported",
     "raw": "1.02545322",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/56",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19142G4",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 56,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19142G4_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-22 142 21:11:57:127 ,Experiment: 0,Test Point: 19142G4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19142G4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19142G4_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-22 142 21:11:57:127 ,Experiment: 0,Test Point: 19142G4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19142G4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.378721,
     "max": 0.378721,
     "quality": "reported",
     "raw": "0.378720538",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.375587,
     "max": 0.375587,
     "quality": "reported",
     "raw": "0.375586869",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 100.181,
     "max": 100.181,
     "quality": "reported",
     "raw": "0.98870838",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/57",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19142G5",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 57,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19142G5_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-22 142 21:42:48:343 ,Experiment: 0,Test Point: 19142G5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19142G5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19142G5_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-22 142 21:42:48:343 ,Experiment: 0,Test Point: 19142G5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19142G5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.375587,
     "max": 0.375587,
     "quality": "reported",
     "raw": "0.375586869",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.373429,
     "max": 0.373429,
     "quality": "reported",
     "raw": "0.373429444",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 100.457,
     "max": 100.457,
     "quality": "reported",
     "raw": "0.99143022",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/58",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19142J3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 58,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19142J3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-22 142 22:52:18:133 ,Experiment: 0,Test Point: 19142J3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19142J3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19142J3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-22 142 22:52:18:133 ,Experiment: 0,Test Point: 19142J3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19142J3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.373429,
     "max": 0.373429,
     "quality": "reported",
     "raw": "0.373429444",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.369621,
     "max": 0.369621,
     "quality": "reported",
     "raw": "0.369621375",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 100.457,
     "max": 100.457,
     "quality": "reported",
     "raw": "0.99143022",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/59",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19150A1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 59,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19150A1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-30 150 16:37:37:627 ,Experiment: 0,Test Point: 19150A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19150A1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-30 150 16:37:37:627 ,Experiment: 0,Test Point: 19150A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2191.41,
     "max": 2191.41,
     "quality": "reported",
     "raw": "2191.412558",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.96583,
     "max": 0.96583,
     "quality": "reported",
     "raw": "0.965830089",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0952984,
     "max": 0.0952984,
     "quality": "reported",
     "raw": "0.095298385",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.398237,
     "max": 0.398237,
     "quality": "reported",
     "raw": "0.398236568",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.3972,
     "max": 0.3972,
     "quality": "reported",
     "raw": "0.397199753",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.767,
     "max": 101.767,
     "quality": "reported",
     "raw": "1.00435896",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.568285,
     "max": 0.568285,
     "quality": "reported",
     "raw": "0.568284905",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/60",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19150A3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 60,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19150A3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-30 150 17:22:45:198 ,Experiment: 0,Test Point: 19150A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19150A3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-30 150 17:22:45:198 ,Experiment: 0,Test Point: 19150A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2191.38,
     "max": 2191.38,
     "quality": "reported",
     "raw": "2191.382943",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.969501,
     "max": 0.969501,
     "quality": "reported",
     "raw": "0.969501438",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0955343,
     "max": 0.0955343,
     "quality": "reported",
     "raw": "0.09553434",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.397053,
     "max": 0.397053,
     "quality": "reported",
     "raw": "0.397053473",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.395465,
     "max": 0.395465,
     "quality": "reported",
     "raw": "0.395464744",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.042,
     "max": 102.042,
     "quality": "reported",
     "raw": "1.0070808",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.566824,
     "max": 0.566824,
     "quality": "reported",
     "raw": "0.566824325",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/61",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19150A4",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 61,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19150A4_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-30 150 18:01:39:672 ,Experiment: 0,Test Point: 19150A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150A4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19150A4_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-30 150 18:01:39:672 ,Experiment: 0,Test Point: 19150A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150A4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2190.31,
     "max": 2190.31,
     "quality": "reported",
     "raw": "2190.311601",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.972398,
     "max": 0.972398,
     "quality": "reported",
     "raw": "0.972398123",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0957493,
     "max": 0.0957493,
     "quality": "reported",
     "raw": "0.095749261",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.395465,
     "max": 0.395465,
     "quality": "reported",
     "raw": "0.395464744",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.39264,
     "max": 0.39264,
     "quality": "reported",
     "raw": "0.392640279",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.387,
     "max": 102.387,
     "quality": "reported",
     "raw": "1.0104831",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.564974,
     "max": 0.564974,
     "quality": "reported",
     "raw": "0.564973815",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/62",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19150A5",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 62,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19150A5_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-30 150 18:32:36:427 ,Experiment: 0,Test Point: 19150A5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150A5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19150A5_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-30 150 18:32:36:427 ,Experiment: 0,Test Point: 19150A5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150A5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2016.49,
     "max": 2016.49,
     "quality": "reported",
     "raw": "2016.486447",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.808461,
     "max": 0.808461,
     "quality": "reported",
     "raw": "0.808461195",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0754559,
     "max": 0.0754559,
     "quality": "reported",
     "raw": "0.075455886",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.39264,
     "max": 0.39264,
     "quality": "reported",
     "raw": "0.392640279",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.389106,
     "max": 0.389106,
     "quality": "reported",
     "raw": "0.389105849",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.87,
     "max": 102.87,
     "quality": "reported",
     "raw": "1.01524632",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.620551,
     "max": 0.620551,
     "quality": "reported",
     "raw": "0.620550782",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/63",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19150B2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 63,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19150B2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-30 150 20:11:09:626 ,Experiment: 0,Test Point: 19150B2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150B2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19150B2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-30 150 20:11:09:626 ,Experiment: 0,Test Point: 19150B2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150B2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2266.28,
     "max": 2266.28,
     "quality": "reported",
     "raw": "2266.279232",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.13605,
     "max": 1.13605,
     "quality": "reported",
     "raw": "1.136048334",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.10965,
     "max": 0.10965,
     "quality": "reported",
     "raw": "0.109649607",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.38895,
     "max": 0.38895,
     "quality": "reported",
     "raw": "0.388949666",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.38628,
     "max": 0.38628,
     "quality": "reported",
     "raw": "0.386279977",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.49,
     "max": 103.49,
     "quality": "reported",
     "raw": "1.02137046",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.527526,
     "max": 0.527526,
     "quality": "reported",
     "raw": "0.527525933",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/64",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19150C1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 64,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19150C1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-30 150 20:34:27:716 ,Experiment: 0,Test Point: 19150C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19150C1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-30 150 20:34:27:716 ,Experiment: 0,Test Point: 19150C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2357.41,
     "max": 2357.41,
     "quality": "reported",
     "raw": "2357.411608",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.30091,
     "max": 1.30091,
     "quality": "reported",
     "raw": "1.300910705",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.130863,
     "max": 0.130863,
     "quality": "reported",
     "raw": "0.130862642",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.38628,
     "max": 0.38628,
     "quality": "reported",
     "raw": "0.386279977",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.382817,
     "max": 0.382817,
     "quality": "reported",
     "raw": "0.382816521",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.835,
     "max": 103.835,
     "quality": "reported",
     "raw": "1.02477276",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.481466,
     "max": 0.481466,
     "quality": "reported",
     "raw": "0.481465783",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/65",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19150B3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 65,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19150B3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-30 150 21:15:02:105 ,Experiment: 0,Test Point: 19150B3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150B3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19150B3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-30 150 21:15:02:105 ,Experiment: 0,Test Point: 19150B3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150B3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2258.51,
     "max": 2258.51,
     "quality": "reported",
     "raw": "2258.50826",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.13602,
     "max": 1.13602,
     "quality": "reported",
     "raw": "1.136022891",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.109637,
     "max": 0.109637,
     "quality": "reported",
     "raw": "0.109636618",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.382817,
     "max": 0.382817,
     "quality": "reported",
     "raw": "0.382816521",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.380192,
     "max": 0.380192,
     "quality": "reported",
     "raw": "0.380191697",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 104.318,
     "max": 104.318,
     "quality": "reported",
     "raw": "1.02953598",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.5238,
     "max": 0.5238,
     "quality": "reported",
     "raw": "0.52379966",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/66",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19150D2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 66,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19150D2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-30 150 21:50:01:725 ,Experiment: 0,Test Point: 19150D2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150D2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19150D2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-30 150 21:50:01:725 ,Experiment: 0,Test Point: 19150D2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150D2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2454.69,
     "max": 2454.69,
     "quality": "reported",
     "raw": "2454.687757",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.95024,
     "max": 1.95024,
     "quality": "reported",
     "raw": "1.950236671",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.16782,
     "max": 0.16782,
     "quality": "reported",
     "raw": "0.167819581",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.380058,
     "max": 0.380058,
     "quality": "reported",
     "raw": "0.380057661",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.371069,
     "max": 0.371069,
     "quality": "reported",
     "raw": "0.371068834",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 104.662,
     "max": 104.662,
     "quality": "reported",
     "raw": "1.03293828",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.414514,
     "max": 0.414514,
     "quality": "reported",
     "raw": "0.414513641",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/67",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19150F1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 67,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19150F1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-30 150 22:16:03:163 ,Experiment: 0,Test Point: 19150F1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19150F1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-30 150 22:16:03:163 ,Experiment: 0,Test Point: 19150F1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2514.16,
     "max": 2514.16,
     "quality": "reported",
     "raw": "2514.159531",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.52131,
     "max": 2.52131,
     "quality": "reported",
     "raw": "2.521308315",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.206099,
     "max": 0.206099,
     "quality": "reported",
     "raw": "0.206098842",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.371069,
     "max": 0.371069,
     "quality": "reported",
     "raw": "0.371068834",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.361329,
     "max": 0.361329,
     "quality": "reported",
     "raw": "0.361329459",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 105.628,
     "max": 105.628,
     "quality": "reported",
     "raw": "1.04246472",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.360134,
     "max": 0.360134,
     "quality": "reported",
     "raw": "0.360134008",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/68",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19150G2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 68,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19150G2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-30 150 23:29:18:969 ,Experiment: 0,Test Point: 19150G2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150G2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19150G2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-30 150 23:29:18:969 ,Experiment: 0,Test Point: 19150G2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150G2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2608.48,
     "max": 2608.48,
     "quality": "reported",
     "raw": "2608.482429",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.521,
     "max": 2.521,
     "quality": "reported",
     "raw": "2.521002995",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.28871,
     "max": 0.28871,
     "quality": "reported",
     "raw": "0.288710257",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.370409,
     "max": 0.370409,
     "quality": "reported",
     "raw": "0.370409062",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.365615,
     "max": 0.365615,
     "quality": "reported",
     "raw": "0.365614547",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 105.628,
     "max": 105.628,
     "quality": "reported",
     "raw": "1.04246472",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.287582,
     "max": 0.287582,
     "quality": "reported",
     "raw": "0.287581619",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/69",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19150H1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 69,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19150H1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-31 151 00:02:03:490 ,Experiment: 0,Test Point: 19150H1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150H1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19150H1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-31 151 00:02:03:490 ,Experiment: 0,Test Point: 19150H1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150H1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2695.15,
     "max": 2695.15,
     "quality": "reported",
     "raw": "2695.153604",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.52004,
     "max": 2.52004,
     "quality": "reported",
     "raw": "2.520039729",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.481698,
     "max": 0.481698,
     "quality": "reported",
     "raw": "0.481697924",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.365615,
     "max": 0.365615,
     "quality": "reported",
     "raw": "0.365614547",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.361749,
     "max": 0.361749,
     "quality": "reported",
     "raw": "0.36174856",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 105.628,
     "max": 105.628,
     "quality": "reported",
     "raw": "1.04246472",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.193052,
     "max": 0.193052,
     "quality": "reported",
     "raw": "0.193051831",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/70",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19150J1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 70,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19150J1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-31 151 00:32:41:102 ,Experiment: 0,Test Point: 19150J1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150J1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19150J1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-31 151 00:32:41:102 ,Experiment: 0,Test Point: 19150J1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150J1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2763.34,
     "max": 2763.34,
     "quality": "reported",
     "raw": "2763.339012",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.51912,
     "max": 2.51912,
     "quality": "reported",
     "raw": "2.519116705",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.361749,
     "max": 0.361749,
     "quality": "reported",
     "raw": "0.36174856",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.358338,
     "max": 0.358338,
     "quality": "reported",
     "raw": "0.358337895",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 106.11,
     "max": 106.11,
     "quality": "reported",
     "raw": "1.04722794",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.10245,
     "max": 0.10245,
     "quality": "reported",
     "raw": "0.102449525",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/71",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19150G3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 71,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19150G3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-31 151 01:06:07:832 ,Experiment: 0,Test Point: 19150G3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150G3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19150G3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-31 151 01:06:07:832 ,Experiment: 0,Test Point: 19150G3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150G3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2590.82,
     "max": 2590.82,
     "quality": "reported",
     "raw": "2590.824593",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.52026,
     "max": 2.52026,
     "quality": "reported",
     "raw": "2.520255857",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.288582,
     "max": 0.288582,
     "quality": "reported",
     "raw": "0.288582188",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.358338,
     "max": 0.358338,
     "quality": "reported",
     "raw": "0.358337895",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.354261,
     "max": 0.354261,
     "quality": "reported",
     "raw": "0.35426149",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 106.11,
     "max": 106.11,
     "quality": "reported",
     "raw": "1.04722794",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.281412,
     "max": 0.281412,
     "quality": "reported",
     "raw": "0.2814123",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/72",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19150N1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 72,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19150N1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-31 151 02:48:28:372 ,Experiment: 0,Test Point: 19150N1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150N1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19150N1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-31 151 02:48:28:372 ,Experiment: 0,Test Point: 19150N1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150N1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2317.42,
     "max": 2317.42,
     "quality": "reported",
     "raw": "2317.42441",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.809161,
     "max": 0.809161,
     "quality": "reported",
     "raw": "0.809161097",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.167871,
     "max": 0.167871,
     "quality": "reported",
     "raw": "0.167870521",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.300281,
     "max": 0.300281,
     "quality": "reported",
     "raw": "0.300281323",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.294019,
     "max": 0.294019,
     "quality": "reported",
     "raw": "0.294018816",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.56,
     "max": 101.56,
     "quality": "reported",
     "raw": "1.00231758",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.361435,
     "max": 0.361435,
     "quality": "reported",
     "raw": "0.361434899",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/73",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19150S1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 73,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19150S1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-31 151 03:12:04:707 ,Experiment: 0,Test Point: 19150S1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150S1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19150S1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-05-31 151 03:12:04:707 ,Experiment: 0,Test Point: 19150S1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19150S1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2632.64,
     "max": 2632.64,
     "quality": "reported",
     "raw": "2632.641072",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.804546,
     "max": 0.804546,
     "quality": "reported",
     "raw": "0.804545996",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.294019,
     "max": 0.294019,
     "quality": "reported",
     "raw": "0.294018816",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.292928,
     "max": 0.292928,
     "quality": "reported",
     "raw": "0.292927725",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.249,
     "max": 102.249,
     "quality": "reported",
     "raw": "1.00912218",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0858298,
     "max": 0.0858298,
     "quality": "reported",
     "raw": "0.085829782",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/74",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19156B2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 74,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19156B2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-05 156 18:35:58:507 ,Experiment: 0,Test Point: 19156B2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156B2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19156B2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-05 156 18:35:58:507 ,Experiment: 0,Test Point: 19156B2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156B2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.388966,
     "max": 0.388966,
     "quality": "reported",
     "raw": "0.388965886",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.388007,
     "max": 0.388007,
     "quality": "reported",
     "raw": "0.388006709",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.663,
     "max": 102.663,
     "quality": "reported",
     "raw": "1.01320494",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/75",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19156B4",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 75,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19156B4_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-05 156 19:41:52:883 ,Experiment: 0,Test Point: 19156B4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156B4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19156B4_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-05 156 19:41:52:883 ,Experiment: 0,Test Point: 19156B4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156B4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1829.22,
     "max": 1829.22,
     "quality": "reported",
     "raw": "1829.222592",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.30043,
     "max": 1.30043,
     "quality": "reported",
     "raw": "1.300425572",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0603101,
     "max": 0.0603101,
     "quality": "reported",
     "raw": "0.060310092",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.387865,
     "max": 0.387865,
     "quality": "reported",
     "raw": "0.38786475",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.379703,
     "max": 0.379703,
     "quality": "reported",
     "raw": "0.379703491",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.87,
     "max": 102.87,
     "quality": "reported",
     "raw": "1.01524632",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.667876,
     "max": 0.667876,
     "quality": "reported",
     "raw": "0.667875606",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/76",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19156K1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 76,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19156K1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-05 156 20:20:06:806 ,Experiment: 0,Test Point: 19156K1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156K1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19156K1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-05 156 20:20:06:806 ,Experiment: 0,Test Point: 19156K1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156K1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2536.53,
     "max": 2536.53,
     "quality": "reported",
     "raw": "2536.529561",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.51618,
     "max": 2.51618,
     "quality": "reported",
     "raw": "2.516179338",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.209735,
     "max": 0.209735,
     "quality": "reported",
     "raw": "0.209735184",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.379703,
     "max": 0.379703,
     "quality": "reported",
     "raw": "0.379703491",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.376922,
     "max": 0.376922,
     "quality": "reported",
     "raw": "0.376921633",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 104.249,
     "max": 104.249,
     "quality": "reported",
     "raw": "1.02885552",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.36323,
     "max": 0.36323,
     "quality": "reported",
     "raw": "0.363230048",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/77",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19156C1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 77,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19156C1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-05 156 20:37:41:769 ,Experiment: 0,Test Point: 19156C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19156C1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-05 156 20:37:41:769 ,Experiment: 0,Test Point: 19156C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2787.38,
     "max": 2787.38,
     "quality": "reported",
     "raw": "2787.380013",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.51538,
     "max": 2.51538,
     "quality": "reported",
     "raw": "2.515380757",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.376922,
     "max": 0.376922,
     "quality": "reported",
     "raw": "0.376921633",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.374961,
     "max": 0.374961,
     "quality": "reported",
     "raw": "0.374961367",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 104.525,
     "max": 104.525,
     "quality": "reported",
     "raw": "1.03157736",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.106286,
     "max": 0.106286,
     "quality": "reported",
     "raw": "0.106286457",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/78",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19156C2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 78,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19156C2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-05 156 21:11:36:940 ,Experiment: 0,Test Point: 19156C2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156C2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19156C2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-05 156 21:11:36:940 ,Experiment: 0,Test Point: 19156C2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156C2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2782.47,
     "max": 2782.47,
     "quality": "reported",
     "raw": "2782.474241",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.52124,
     "max": 2.52124,
     "quality": "reported",
     "raw": "2.521243168",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.374961,
     "max": 0.374961,
     "quality": "reported",
     "raw": "0.374961367",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.370676,
     "max": 0.370676,
     "quality": "reported",
     "raw": "0.370676005",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 104.456,
     "max": 104.456,
     "quality": "reported",
     "raw": "1.0308969",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.105537,
     "max": 0.105537,
     "quality": "reported",
     "raw": "0.105536682",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/79",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19156C3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 79,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19156C3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-05 156 22:11:44:102 ,Experiment: 0,Test Point: 19156C3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156C3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19156C3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-05 156 22:11:44:102 ,Experiment: 0,Test Point: 19156C3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156C3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2776.11,
     "max": 2776.11,
     "quality": "reported",
     "raw": "2776.112319",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.51891,
     "max": 2.51891,
     "quality": "reported",
     "raw": "2.518910212",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.370676,
     "max": 0.370676,
     "quality": "reported",
     "raw": "0.370676005",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.366513,
     "max": 0.366513,
     "quality": "reported",
     "raw": "0.366513124",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 104.456,
     "max": 104.456,
     "quality": "reported",
     "raw": "1.0308969",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.104519,
     "max": 0.104519,
     "quality": "reported",
     "raw": "0.10451947",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/80",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19156J1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 80,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19156J1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-05 156 23:29:31:694 ,Experiment: 0,Test Point: 19156J1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156J1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19156J1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-05 156 23:29:31:694 ,Experiment: 0,Test Point: 19156J1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156J1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.373448,
     "max": 0.373448,
     "quality": "reported",
     "raw": "0.373448053",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.3704,
     "max": 0.3704,
     "quality": "reported",
     "raw": "0.370400179",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.973,
     "max": 103.973,
     "quality": "reported",
     "raw": "1.02613368",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/81",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19156J2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 81,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19156J2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-05 156 23:55:18:401 ,Experiment: 0,Test Point: 19156J2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156J2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19156J2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-05 156 23:55:18:401 ,Experiment: 0,Test Point: 19156J2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156J2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2777.18,
     "max": 2777.18,
     "quality": "reported",
     "raw": "2777.179214",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.13478,
     "max": 1.13478,
     "quality": "reported",
     "raw": "1.134782537",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.3704,
     "max": 0.3704,
     "quality": "reported",
     "raw": "0.370400179",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.368535,
     "max": 0.368535,
     "quality": "reported",
     "raw": "0.368534858",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.973,
     "max": 103.973,
     "quality": "reported",
     "raw": "1.02613368",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.10473,
     "max": 0.10473,
     "quality": "reported",
     "raw": "0.104729972",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/82",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19156J3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 82,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19156J3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-06 157 00:28:57:035 ,Experiment: 0,Test Point: 19156J3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156J3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19156J3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-06 157 00:28:57:035 ,Experiment: 0,Test Point: 19156J3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156J3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2773.59,
     "max": 2773.59,
     "quality": "reported",
     "raw": "2773.585036",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.29972,
     "max": 1.29972,
     "quality": "reported",
     "raw": "1.299724",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.368535,
     "max": 0.368535,
     "quality": "reported",
     "raw": "0.368534858",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.36593,
     "max": 0.36593,
     "quality": "reported",
     "raw": "0.365929881",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.973,
     "max": 103.973,
     "quality": "reported",
     "raw": "1.02613368",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.104191,
     "max": 0.104191,
     "quality": "reported",
     "raw": "0.104190696",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/83",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19156J4",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 83,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19156J4_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-06 157 00:44:23:798 ,Experiment: 0,Test Point: 19156J4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156J4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19156J4_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-06 157 00:44:23:798 ,Experiment: 0,Test Point: 19156J4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156J4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2770.48,
     "max": 2770.48,
     "quality": "reported",
     "raw": "2770.475153",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.03272,
     "max": 1.03272,
     "quality": "reported",
     "raw": "1.032721257",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.36593,
     "max": 0.36593,
     "quality": "reported",
     "raw": "0.365929881",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.364457,
     "max": 0.364457,
     "quality": "reported",
     "raw": "0.364456988",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.973,
     "max": 103.973,
     "quality": "reported",
     "raw": "1.02613368",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.103698,
     "max": 0.103698,
     "quality": "reported",
     "raw": "0.103697909",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/84",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19156J5",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 84,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19156J5_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-06 157 01:22:08:529 ,Experiment: 0,Test Point: 19156J5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156J5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19156J5_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-06 157 01:22:08:529 ,Experiment: 0,Test Point: 19156J5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156J5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.364457,
     "max": 0.364457,
     "quality": "reported",
     "raw": "0.364456988",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.362735,
     "max": 0.362735,
     "quality": "reported",
     "raw": "0.362735024",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.904,
     "max": 103.904,
     "quality": "reported",
     "raw": "1.02545322",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/85",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19156J6",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 85,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19156J6_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-06 157 02:00:52:858 ,Experiment: 0,Test Point: 19156J6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156J6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19156J6_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-06 157 02:00:52:858 ,Experiment: 0,Test Point: 19156J6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156J6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.362735,
     "max": 0.362735,
     "quality": "reported",
     "raw": "0.362735024",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.360923,
     "max": 0.360923,
     "quality": "reported",
     "raw": "0.36092323",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.835,
     "max": 103.835,
     "quality": "reported",
     "raw": "1.02477276",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/86",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19156J7",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 86,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19156J7_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-06 157 02:34:44:633 ,Experiment: 0,Test Point: 19156J7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156J7_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19156J7_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-06 157 02:34:44:633 ,Experiment: 0,Test Point: 19156J7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19156J7_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.360923,
     "max": 0.360923,
     "quality": "reported",
     "raw": "0.36092323",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.358883,
     "max": 0.358883,
     "quality": "reported",
     "raw": "0.358883174",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.835,
     "max": 103.835,
     "quality": "reported",
     "raw": "1.02477276",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/87",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19171D1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 87,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19171D1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-20 171 16:04:05:706 ,Experiment: 0,Test Point: 19171D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171D1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19171D1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-20 171 16:04:05:706 ,Experiment: 0,Test Point: 19171D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171D1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2805.86,
     "max": 2805.86,
     "quality": "reported",
     "raw": "2805.86129",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.52,
     "max": 2.52,
     "quality": "reported",
     "raw": "2.520000199",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.39435,
     "max": 0.39435,
     "quality": "reported",
     "raw": "0.394349885",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.386571,
     "max": 0.386571,
     "quality": "reported",
     "raw": "0.386570926",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.629,
     "max": 101.629,
     "quality": "reported",
     "raw": "1.00299804",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.109748,
     "max": 0.109748,
     "quality": "reported",
     "raw": "0.109747693",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/88",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19171D2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 88,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19171D2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-20 171 17:28:09:665 ,Experiment: 0,Test Point: 19171D2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171D2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19171D2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-20 171 17:28:09:665 ,Experiment: 0,Test Point: 19171D2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171D2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2796.64,
     "max": 2796.64,
     "quality": "reported",
     "raw": "2796.639651",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.51932,
     "max": 2.51932,
     "quality": "reported",
     "raw": "2.519323729",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.386571,
     "max": 0.386571,
     "quality": "reported",
     "raw": "0.386570926",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.381345,
     "max": 0.381345,
     "quality": "reported",
     "raw": "0.381344603",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.629,
     "max": 101.629,
     "quality": "reported",
     "raw": "1.00299804",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.108202,
     "max": 0.108202,
     "quality": "reported",
     "raw": "0.108202498",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/89",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19171D3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 89,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19171D3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-20 171 17:49:21:526 ,Experiment: 0,Test Point: 19171D3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171D3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19171D3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-20 171 17:49:21:526 ,Experiment: 0,Test Point: 19171D3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171D3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2790.83,
     "max": 2790.83,
     "quality": "reported",
     "raw": "2790.830854",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.51769,
     "max": 2.51769,
     "quality": "reported",
     "raw": "2.517689704",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.381345,
     "max": 0.381345,
     "quality": "reported",
     "raw": "0.381344603",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.378554,
     "max": 0.378554,
     "quality": "reported",
     "raw": "0.378553501",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.698,
     "max": 101.698,
     "quality": "reported",
     "raw": "1.0036785",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.107246,
     "max": 0.107246,
     "quality": "reported",
     "raw": "0.107245887",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/90",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19171D4",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 90,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19171D4_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-20 171 18:23:05:139 ,Experiment: 0,Test Point: 19171D4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171D4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19171D4_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-20 171 18:23:05:139 ,Experiment: 0,Test Point: 19171D4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171D4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2785.31,
     "max": 2785.31,
     "quality": "reported",
     "raw": "2785.313081",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.51932,
     "max": 2.51932,
     "quality": "reported",
     "raw": "2.519315801",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.378554,
     "max": 0.378554,
     "quality": "reported",
     "raw": "0.378553501",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.373907,
     "max": 0.373907,
     "quality": "reported",
     "raw": "0.373907361",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.629,
     "max": 101.629,
     "quality": "reported",
     "raw": "1.00299804",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.106356,
     "max": 0.106356,
     "quality": "reported",
     "raw": "0.106355733",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/91",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19171D5",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 91,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19171D5_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-20 171 18:51:55:162 ,Experiment: 0,Test Point: 19171D5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171D5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19171D5_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-20 171 18:51:55:162 ,Experiment: 0,Test Point: 19171D5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171D5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2778.66,
     "max": 2778.66,
     "quality": "reported",
     "raw": "2778.6568",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.51891,
     "max": 2.51891,
     "quality": "reported",
     "raw": "2.518911891",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.373907,
     "max": 0.373907,
     "quality": "reported",
     "raw": "0.373907361",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.369543,
     "max": 0.369543,
     "quality": "reported",
     "raw": "0.369543498",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.629,
     "max": 101.629,
     "quality": "reported",
     "raw": "1.00299804",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.105274,
     "max": 0.105274,
     "quality": "reported",
     "raw": "0.105273748",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/92",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19171S1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 92,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19171S1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-20 171 19:27:40:370 ,Experiment: 0,Test Point: 19171S1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171S1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19171S1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-20 171 19:27:40:370 ,Experiment: 0,Test Point: 19171S1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171S1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.369543,
     "max": 0.369543,
     "quality": "reported",
     "raw": "0.369543498",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.36715,
     "max": 0.36715,
     "quality": "reported",
     "raw": "0.367150074",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.698,
     "max": 101.698,
     "quality": "reported",
     "raw": "1.0036785",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/93",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19171B1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 93,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19171B1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-20 171 21:39:52:448 ,Experiment: 0,Test Point: 19171B1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19171B1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-20 171 21:39:52:448 ,Experiment: 0,Test Point: 19171B1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.378874,
     "max": 0.378874,
     "quality": "reported",
     "raw": "0.378873529",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.372136,
     "max": 0.372136,
     "quality": "reported",
     "raw": "0.372135709",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.111,
     "max": 102.111,
     "quality": "reported",
     "raw": "1.00776126",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/94",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19171B3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 94,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19171B3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-20 171 22:56:04:900 ,Experiment: 0,Test Point: 19171B3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171B3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19171B3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-20 171 22:56:04:900 ,Experiment: 0,Test Point: 19171B3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171B3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.372136,
     "max": 0.372136,
     "quality": "reported",
     "raw": "0.372135709",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.365352,
     "max": 0.365352,
     "quality": "reported",
     "raw": "0.365351771",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 103.146,
     "max": 103.146,
     "quality": "reported",
     "raw": "1.01796816",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/95",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19171J1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 95,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19171J1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-20 171 23:37:56:914 ,Experiment: 0,Test Point: 19171J1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171J1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19171J1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-20 171 23:37:56:914 ,Experiment: 0,Test Point: 19171J1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171J1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.365352,
     "max": 0.365352,
     "quality": "reported",
     "raw": "0.365351771",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.36258,
     "max": 0.36258,
     "quality": "reported",
     "raw": "0.362579633",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 104.249,
     "max": 104.249,
     "quality": "reported",
     "raw": "1.02885552",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/96",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19171J2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 96,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19171J2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-21 172 00:15:02:441 ,Experiment: 0,Test Point: 19171J2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171J2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19171J2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-21 172 00:15:02:441 ,Experiment: 0,Test Point: 19171J2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171J2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2765.57,
     "max": 2765.57,
     "quality": "reported",
     "raw": "2765.566709",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.03201,
     "max": 1.03201,
     "quality": "reported",
     "raw": "1.032011786",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.36258,
     "max": 0.36258,
     "quality": "reported",
     "raw": "0.362579633",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.361427,
     "max": 0.361427,
     "quality": "reported",
     "raw": "0.361426502",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 104.456,
     "max": 104.456,
     "quality": "reported",
     "raw": "1.0308969",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.102925,
     "max": 0.102925,
     "quality": "reported",
     "raw": "0.102925196",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/97",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19171J3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 97,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19171J3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-21 172 00:30:14:799 ,Experiment: 0,Test Point: 19171J3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171J3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19171J3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-21 172 00:30:14:799 ,Experiment: 0,Test Point: 19171J3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171J3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.361427,
     "max": 0.361427,
     "quality": "reported",
     "raw": "0.361426502",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.359595,
     "max": 0.359595,
     "quality": "reported",
     "raw": "0.35959538",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 104.456,
     "max": 104.456,
     "quality": "reported",
     "raw": "1.0308969",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/98",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19171J4",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 98,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19171J4_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-21 172 01:06:39:805 ,Experiment: 0,Test Point: 19171J4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171J4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19171J4_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-21 172 01:06:39:805 ,Experiment: 0,Test Point: 19171J4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19171J4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.359595,
     "max": 0.359595,
     "quality": "reported",
     "raw": "0.35959538",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.356951,
     "max": 0.356951,
     "quality": "reported",
     "raw": "0.356951356",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 104.525,
     "max": 104.525,
     "quality": "reported",
     "raw": "1.03157736",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/99",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19175A2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 99,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19175A2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-24 175 15:55:26:606 ,Experiment: 0,Test Point: 19175A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19175A2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-24 175 15:55:26:606 ,Experiment: 0,Test Point: 19175A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.39839,
     "max": 0.39839,
     "quality": "reported",
     "raw": "0.398389773",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.397248,
     "max": 0.397248,
     "quality": "reported",
     "raw": "0.397248069",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.484,
     "max": 127.484,
     "quality": "reported",
     "raw": "1.25817054",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/100",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19175A3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 100,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19175A3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-24 175 16:54:32:287 ,Experiment: 0,Test Point: 19175A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19175A3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-24 175 16:54:32:287 ,Experiment: 0,Test Point: 19175A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2830.66,
     "max": 2830.66,
     "quality": "reported",
     "raw": "2830.663435",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.94919,
     "max": 1.94919,
     "quality": "reported",
     "raw": "1.94919306",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.397248,
     "max": 0.397248,
     "quality": "reported",
     "raw": "0.397248069",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.390983,
     "max": 0.390983,
     "quality": "reported",
     "raw": "0.390982574",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.691,
     "max": 127.691,
     "quality": "reported",
     "raw": "1.26021192",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.110613,
     "max": 0.110613,
     "quality": "reported",
     "raw": "0.110612658",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/101",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19175A4",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 101,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19175A4_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-24 175 17:44:10:400 ,Experiment: 0,Test Point: 19175A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175A4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19175A4_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-24 175 17:44:10:400 ,Experiment: 0,Test Point: 19175A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175A4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2824.35,
     "max": 2824.35,
     "quality": "reported",
     "raw": "2824.353784",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.94759,
     "max": 1.94759,
     "quality": "reported",
     "raw": "1.947587353",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.390983,
     "max": 0.390983,
     "quality": "reported",
     "raw": "0.390982574",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.388733,
     "max": 0.388733,
     "quality": "reported",
     "raw": "0.388733316",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.691,
     "max": 127.691,
     "quality": "reported",
     "raw": "1.26021192",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.109605,
     "max": 0.109605,
     "quality": "reported",
     "raw": "0.109604872",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/102",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19175B1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 102,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19175B1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-24 175 19:23:18:418 ,Experiment: 0,Test Point: 19175B1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19175B1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-24 175 19:23:18:418 ,Experiment: 0,Test Point: 19175B1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2665.38,
     "max": 2665.38,
     "quality": "reported",
     "raw": "2665.383806",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.30358,
     "max": 1.30358,
     "quality": "reported",
     "raw": "1.30357592",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.309737,
     "max": 0.309737,
     "quality": "reported",
     "raw": "0.309737361",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.388733,
     "max": 0.388733,
     "quality": "reported",
     "raw": "0.388733316",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.387684,
     "max": 0.387684,
     "quality": "reported",
     "raw": "0.387684407",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.76,
     "max": 127.76,
     "quality": "reported",
     "raw": "1.26089238",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.283581,
     "max": 0.283581,
     "quality": "reported",
     "raw": "0.283580737",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/103",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19175B4",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 103,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19175B4_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-24 175 21:46:36:941 ,Experiment: 0,Test Point: 19175B4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175B4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19175B4_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-24 175 21:46:36:941 ,Experiment: 0,Test Point: 19175B4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175B4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2657.78,
     "max": 2657.78,
     "quality": "reported",
     "raw": "2657.777524",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.29975,
     "max": 1.29975,
     "quality": "reported",
     "raw": "1.299751643",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.303297,
     "max": 0.303297,
     "quality": "reported",
     "raw": "0.303297217",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.387591,
     "max": 0.387591,
     "quality": "reported",
     "raw": "0.387591064",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.384887,
     "max": 0.384887,
     "quality": "reported",
     "raw": "0.384886695",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.898,
     "max": 127.898,
     "quality": "reported",
     "raw": "1.2622533",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.286882,
     "max": 0.286882,
     "quality": "reported",
     "raw": "0.286881575",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/104",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19175B5",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 104,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19175B5_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-24 175 22:22:29:057 ,Experiment: 0,Test Point: 19175B5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175B5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19175B5_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-24 175 22:22:29:057 ,Experiment: 0,Test Point: 19175B5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175B5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2654.7,
     "max": 2654.7,
     "quality": "reported",
     "raw": "2654.700196",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.29876,
     "max": 1.29876,
     "quality": "reported",
     "raw": "1.298756409",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.303218,
     "max": 0.303218,
     "quality": "reported",
     "raw": "0.303217524",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.384887,
     "max": 0.384887,
     "quality": "reported",
     "raw": "0.384886695",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.383112,
     "max": 0.383112,
     "quality": "reported",
     "raw": "0.383111725",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 128.105,
     "max": 128.105,
     "quality": "reported",
     "raw": "1.26429468",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.285809,
     "max": 0.285809,
     "quality": "reported",
     "raw": "0.285808835",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/105",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19175B6",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 105,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19175B6_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-24 175 23:23:23:743 ,Experiment: 0,Test Point: 19175B6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175B6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19175B6_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-24 175 23:23:23:743 ,Experiment: 0,Test Point: 19175B6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175B6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2490.91,
     "max": 2490.91,
     "quality": "reported",
     "raw": "2490.914521",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.29736,
     "max": 1.29736,
     "quality": "reported",
     "raw": "1.297359508",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.17217,
     "max": 0.17217,
     "quality": "reported",
     "raw": "0.172170342",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.389437,
     "max": 0.389437,
     "quality": "reported",
     "raw": "0.389437129",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.38785,
     "max": 0.38785,
     "quality": "reported",
     "raw": "0.387849574",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 126.588,
     "max": 126.588,
     "quality": "reported",
     "raw": "1.24932456",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.416182,
     "max": 0.416182,
     "quality": "reported",
     "raw": "0.416181535",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/106",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19175B7",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 106,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19175B7_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-25 176 00:01:53:973 ,Experiment: 0,Test Point: 19175B7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175B7_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19175B7_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-25 176 00:01:53:973 ,Experiment: 0,Test Point: 19175B7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175B7_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2488.87,
     "max": 2488.87,
     "quality": "reported",
     "raw": "2488.873852",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.29822,
     "max": 1.29822,
     "quality": "reported",
     "raw": "1.298220119",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.172209,
     "max": 0.172209,
     "quality": "reported",
     "raw": "0.172208948",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.38785,
     "max": 0.38785,
     "quality": "reported",
     "raw": "0.387849574",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.38596,
     "max": 0.38596,
     "quality": "reported",
     "raw": "0.385960225",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.415,
     "max": 127.415,
     "quality": "reported",
     "raw": "1.25749008",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.415095,
     "max": 0.415095,
     "quality": "reported",
     "raw": "0.415095349",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/107",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19175B8",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 107,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19175B8_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-25 176 00:40:46:601 ,Experiment: 0,Test Point: 19175B8,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175B8_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19175B8_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-25 176 00:40:46:601 ,Experiment: 0,Test Point: 19175B8,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175B8_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2486.51,
     "max": 2486.51,
     "quality": "reported",
     "raw": "2486.510624",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.29891,
     "max": 1.29891,
     "quality": "reported",
     "raw": "1.298905484",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.172374,
     "max": 0.172374,
     "quality": "reported",
     "raw": "0.172374253",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.38596,
     "max": 0.38596,
     "quality": "reported",
     "raw": "0.385960225",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.383986,
     "max": 0.383986,
     "quality": "reported",
     "raw": "0.383985713",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.001,
     "max": 127.001,
     "quality": "reported",
     "raw": "1.25340732",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.413711,
     "max": 0.413711,
     "quality": "reported",
     "raw": "0.41371122",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/108",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19175B9",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 108,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19175B9_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-25 176 01:08:08:651 ,Experiment: 0,Test Point: 19175B9,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175B9_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19175B9_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-25 176 01:08:08:651 ,Experiment: 0,Test Point: 19175B9,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175B9_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2558.28,
     "max": 2558.28,
     "quality": "reported",
     "raw": "2558.279677",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.29825,
     "max": 1.29825,
     "quality": "reported",
     "raw": "1.298245401",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.212885,
     "max": 0.212885,
     "quality": "reported",
     "raw": "0.212884807",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.383986,
     "max": 0.383986,
     "quality": "reported",
     "raw": "0.383985713",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.382547,
     "max": 0.382547,
     "quality": "reported",
     "raw": "0.382547209",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.277,
     "max": 127.277,
     "quality": "reported",
     "raw": "1.25612916",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.362637,
     "max": 0.362637,
     "quality": "reported",
     "raw": "0.362636535",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/109",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19175N1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 109,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19175N1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-25 176 01:30:26:404 ,Experiment: 0,Test Point: 19175N1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175N1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19175N1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-25 176 01:30:26:404 ,Experiment: 0,Test Point: 19175N1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175N1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2555.23,
     "max": 2555.23,
     "quality": "reported",
     "raw": "2555.231192",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.29969,
     "max": 1.29969,
     "quality": "reported",
     "raw": "1.299686925",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.212898,
     "max": 0.212898,
     "quality": "reported",
     "raw": "0.212898321",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.382547,
     "max": 0.382547,
     "quality": "reported",
     "raw": "0.382547209",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.379403,
     "max": 0.379403,
     "quality": "reported",
     "raw": "0.379403054",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.415,
     "max": 127.415,
     "quality": "reported",
     "raw": "1.25749008",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.361309,
     "max": 0.361309,
     "quality": "reported",
     "raw": "0.361308708",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/110",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19175N2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 110,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19175N2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-25 176 02:03:14:334 ,Experiment: 0,Test Point: 19175N2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175N2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19175N2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-25 176 02:03:14:334 ,Experiment: 0,Test Point: 19175N2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175N2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2743.82,
     "max": 2743.82,
     "quality": "reported",
     "raw": "2743.821709",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.29904,
     "max": 1.29904,
     "quality": "reported",
     "raw": "1.299035736",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.528269,
     "max": 0.528269,
     "quality": "reported",
     "raw": "0.528268882",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.379403,
     "max": 0.379403,
     "quality": "reported",
     "raw": "0.379403054",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.377442,
     "max": 0.377442,
     "quality": "reported",
     "raw": "0.377441609",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.691,
     "max": 127.691,
     "quality": "reported",
     "raw": "1.26021192",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.184695,
     "max": 0.184695,
     "quality": "reported",
     "raw": "0.18469499",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/111",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19175N3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 111,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19175N3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-25 176 02:38:53:965 ,Experiment: 0,Test Point: 19175N3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175N3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19175N3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-06-25 176 02:38:53:965 ,Experiment: 0,Test Point: 19175N3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19175N3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2751.91,
     "max": 2751.91,
     "quality": "reported",
     "raw": "2751.908041",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.975829,
     "max": 0.975829,
     "quality": "reported",
     "raw": "0.975828711",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.573925,
     "max": 0.573925,
     "quality": "reported",
     "raw": "0.573924915",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.377442,
     "max": 0.377442,
     "quality": "reported",
     "raw": "0.377441609",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.376039,
     "max": 0.376039,
     "quality": "reported",
     "raw": "0.376039214",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.691,
     "max": 127.691,
     "quality": "reported",
     "raw": "1.26021192",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.171935,
     "max": 0.171935,
     "quality": "reported",
     "raw": "0.171934852",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/112",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19182G1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 112,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19182G1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 13:50:02:817 ,Experiment: 0,Test Point: 19182G1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182G1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19182G1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 13:50:02:817 ,Experiment: 0,Test Point: 19182G1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182G1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.398542,
     "max": 0.398542,
     "quality": "reported",
     "raw": "0.398542439",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.396833,
     "max": 0.396833,
     "quality": "reported",
     "raw": "0.396833456",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.415,
     "max": 127.415,
     "quality": "reported",
     "raw": "1.25749008",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/113",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19182G2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 113,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19182G2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 14:19:41:131 ,Experiment: 0,Test Point: 19182G2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182G2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19182G2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 14:19:41:131 ,Experiment: 0,Test Point: 19182G2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182G2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2578.37,
     "max": 2578.37,
     "quality": "reported",
     "raw": "2578.366327",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.13436,
     "max": 1.13436,
     "quality": "reported",
     "raw": "1.134358814",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.214661,
     "max": 0.214661,
     "quality": "reported",
     "raw": "0.214661123",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.396833,
     "max": 0.396833,
     "quality": "reported",
     "raw": "0.396833456",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.395221,
     "max": 0.395221,
     "quality": "reported",
     "raw": "0.39522143",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.691,
     "max": 127.691,
     "quality": "reported",
     "raw": "1.26021192",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.367903,
     "max": 0.367903,
     "quality": "reported",
     "raw": "0.367903297",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/114",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19182G3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 114,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19182G3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 14:47:18:880 ,Experiment: 0,Test Point: 19182G3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182G3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19182G3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 14:47:18:880 ,Experiment: 0,Test Point: 19182G3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182G3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2576.22,
     "max": 2576.22,
     "quality": "reported",
     "raw": "2576.224326",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.13437,
     "max": 1.13437,
     "quality": "reported",
     "raw": "1.134368989",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.214557,
     "max": 0.214557,
     "quality": "reported",
     "raw": "0.214556679",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.395221,
     "max": 0.395221,
     "quality": "reported",
     "raw": "0.39522143",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.393608,
     "max": 0.393608,
     "quality": "reported",
     "raw": "0.393608129",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.967,
     "max": 127.967,
     "quality": "reported",
     "raw": "1.26293376",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.367119,
     "max": 0.367119,
     "quality": "reported",
     "raw": "0.367118634",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/115",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19182G6",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 115,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19182G6_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 16:38:23:180 ,Experiment: 0,Test Point: 19182G6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182G6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19182G6_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 16:38:23:180 ,Experiment: 0,Test Point: 19182G6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182G6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.393608,
     "max": 0.393608,
     "quality": "reported",
     "raw": "0.393608129",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.392269,
     "max": 0.392269,
     "quality": "reported",
     "raw": "0.392269326",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 128.312,
     "max": 128.312,
     "quality": "reported",
     "raw": "1.26633606",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/116",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19182G7",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 116,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19182G7_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 17:12:13:299 ,Experiment: 0,Test Point: 19182G7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182G7_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19182G7_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 17:12:13:299 ,Experiment: 0,Test Point: 19182G7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182G7_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.392269,
     "max": 0.392269,
     "quality": "reported",
     "raw": "0.392269326",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.390189,
     "max": 0.390189,
     "quality": "reported",
     "raw": "0.390189347",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 128.587,
     "max": 128.587,
     "quality": "reported",
     "raw": "1.2690579",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/117",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19182G8",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 117,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19182G8_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 17:27:12:761 ,Experiment: 0,Test Point: 19182G8,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182G8_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19182G8_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 17:27:12:761 ,Experiment: 0,Test Point: 19182G8,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182G8_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.390189,
     "max": 0.390189,
     "quality": "reported",
     "raw": "0.390189347",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.388151,
     "max": 0.388151,
     "quality": "reported",
     "raw": "0.388150549",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 128.863,
     "max": 128.863,
     "quality": "reported",
     "raw": "1.27177974",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/118",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19182G9",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 118,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19182G9_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 18:11:10:276 ,Experiment: 0,Test Point: 19182G9,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182G9_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19182G9_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 18:11:10:276 ,Experiment: 0,Test Point: 19182G9,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182G9_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2569.05,
     "max": 2569.05,
     "quality": "reported",
     "raw": "2569.047897",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.969566,
     "max": 0.969566,
     "quality": "reported",
     "raw": "0.969566438",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.215806,
     "max": 0.215806,
     "quality": "reported",
     "raw": "0.215806298",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.388151,
     "max": 0.388151,
     "quality": "reported",
     "raw": "0.388150549",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.386276,
     "max": 0.386276,
     "quality": "reported",
     "raw": "0.386276376",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 129.139,
     "max": 129.139,
     "quality": "reported",
     "raw": "1.27450158",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.361731,
     "max": 0.361731,
     "quality": "reported",
     "raw": "0.361731262",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/119",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19182N1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 119,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19182N1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 19:16:07:447 ,Experiment: 0,Test Point: 19182N1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182N1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19182N1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 19:16:07:447 ,Experiment: 0,Test Point: 19182N1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182N1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2565.17,
     "max": 2565.17,
     "quality": "reported",
     "raw": "2565.170159",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.13309,
     "max": 1.13309,
     "quality": "reported",
     "raw": "1.133093371",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.214632,
     "max": 0.214632,
     "quality": "reported",
     "raw": "0.214632319",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.386276,
     "max": 0.386276,
     "quality": "reported",
     "raw": "0.386276376",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.384856,
     "max": 0.384856,
     "quality": "reported",
     "raw": "0.384855559",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 129.346,
     "max": 129.346,
     "quality": "reported",
     "raw": "1.27654296",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.362058,
     "max": 0.362058,
     "quality": "reported",
     "raw": "0.362057801",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/120",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19182N2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 120,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19182N2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 20:17:47:230 ,Experiment: 0,Test Point: 19182N2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182N2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19182N2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 20:17:47:230 ,Experiment: 0,Test Point: 19182N2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182N2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2568.72,
     "max": 2568.72,
     "quality": "reported",
     "raw": "2568.715351",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.13371,
     "max": 1.13371,
     "quality": "reported",
     "raw": "1.133714113",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.214612,
     "max": 0.214612,
     "quality": "reported",
     "raw": "0.214611599",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.389021,
     "max": 0.389021,
     "quality": "reported",
     "raw": "0.389021209",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.387585,
     "max": 0.387585,
     "quality": "reported",
     "raw": "0.38758473",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 129.001,
     "max": 129.001,
     "quality": "reported",
     "raw": "1.27314066",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.36363,
     "max": 0.36363,
     "quality": "reported",
     "raw": "0.363629788",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/121",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19182N3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 121,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19182N3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 20:48:43:891 ,Experiment: 0,Test Point: 19182N3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182N3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19182N3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 20:48:43:891 ,Experiment: 0,Test Point: 19182N3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182N3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2568.86,
     "max": 2568.86,
     "quality": "reported",
     "raw": "2568.856488",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.969971,
     "max": 0.969971,
     "quality": "reported",
     "raw": "0.969971368",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.216176,
     "max": 0.216176,
     "quality": "reported",
     "raw": "0.216175824",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.387585,
     "max": 0.387585,
     "quality": "reported",
     "raw": "0.38758473",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.385704,
     "max": 0.385704,
     "quality": "reported",
     "raw": "0.385704463",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 129.208,
     "max": 129.208,
     "quality": "reported",
     "raw": "1.27518204",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.361015,
     "max": 0.361015,
     "quality": "reported",
     "raw": "0.361014904",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/122",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19182A1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 122,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19182A1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 21:27:41:090 ,Experiment: 0,Test Point: 19182A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19182A1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 21:27:41:090 ,Experiment: 0,Test Point: 19182A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.385704,
     "max": 0.385704,
     "quality": "reported",
     "raw": "0.385704463",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.384814,
     "max": 0.384814,
     "quality": "reported",
     "raw": "0.384814006",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 129.346,
     "max": 129.346,
     "quality": "reported",
     "raw": "1.27654296",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/123",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19182C1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 123,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19182C1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 21:49:46:877 ,Experiment: 0,Test Point: 19182C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19182C1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 21:49:46:877 ,Experiment: 0,Test Point: 19182C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1773.19,
     "max": 1773.19,
     "quality": "reported",
     "raw": "1773.186913",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.639973,
     "max": 0.639973,
     "quality": "reported",
     "raw": "0.639972949",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0563298,
     "max": 0.0563298,
     "quality": "reported",
     "raw": "0.056329846",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.384814,
     "max": 0.384814,
     "quality": "reported",
     "raw": "0.384814006",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.382594,
     "max": 0.382594,
     "quality": "reported",
     "raw": "0.382594439",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 129.622,
     "max": 129.622,
     "quality": "reported",
     "raw": "1.2792648",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.6828,
     "max": 0.6828,
     "quality": "reported",
     "raw": "0.682800088",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/124",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19182C2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 124,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19182C2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 22:32:57:564 ,Experiment: 0,Test Point: 19182C2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182C2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19182C2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 22:32:57:564 ,Experiment: 0,Test Point: 19182C2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182C2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1722.4,
     "max": 1722.4,
     "quality": "reported",
     "raw": "1722.401267",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.640282,
     "max": 0.640282,
     "quality": "reported",
     "raw": "0.640281524",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0531194,
     "max": 0.0531194,
     "quality": "reported",
     "raw": "0.053119385",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.382594,
     "max": 0.382594,
     "quality": "reported",
     "raw": "0.382594439",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.380272,
     "max": 0.380272,
     "quality": "reported",
     "raw": "0.380272275",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 130.104,
     "max": 130.104,
     "quality": "reported",
     "raw": "1.28402802",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.694178,
     "max": 0.694178,
     "quality": "reported",
     "raw": "0.694177801",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/125",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19182N4",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 125,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19182N4_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 22:54:30:921 ,Experiment: 0,Test Point: 19182N4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182N4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19182N4_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-01 182 22:54:30:921 ,Experiment: 0,Test Point: 19182N4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182N4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2559.12,
     "max": 2559.12,
     "quality": "reported",
     "raw": "2559.119998",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.970003,
     "max": 0.970003,
     "quality": "reported",
     "raw": "0.970002779",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.21602,
     "max": 0.21602,
     "quality": "reported",
     "raw": "0.216019519",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.380272,
     "max": 0.380272,
     "quality": "reported",
     "raw": "0.380272275",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.37843,
     "max": 0.37843,
     "quality": "reported",
     "raw": "0.378429675",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 130.587,
     "max": 130.587,
     "quality": "reported",
     "raw": "1.28879124",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.357026,
     "max": 0.357026,
     "quality": "reported",
     "raw": "0.357026209",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/126",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19182F1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 126,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19182F1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-02 183 00:17:20:974 ,Experiment: 0,Test Point: 19182F1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19182F1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-02 183 00:17:20:974 ,Experiment: 0,Test Point: 19182F1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19182F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2079.16,
     "max": 2079.16,
     "quality": "reported",
     "raw": "2079.163152",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.806306,
     "max": 0.806306,
     "quality": "reported",
     "raw": "0.806306229",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0837666,
     "max": 0.0837666,
     "quality": "reported",
     "raw": "0.083766592",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.37843,
     "max": 0.37843,
     "quality": "reported",
     "raw": "0.378429675",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.373744,
     "max": 0.373744,
     "quality": "reported",
     "raw": "0.373744084",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 130.725,
     "max": 130.725,
     "quality": "reported",
     "raw": "1.29015216",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.586821,
     "max": 0.586821,
     "quality": "reported",
     "raw": "0.586821387",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/127",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19189A1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 127,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19189A1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 14:27:23:134 ,Experiment: 0,Test Point: 19189A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19189A1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 14:27:23:134 ,Experiment: 0,Test Point: 19189A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1682.72,
     "max": 1682.72,
     "quality": "reported",
     "raw": "1682.720497",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.639978,
     "max": 0.639978,
     "quality": "reported",
     "raw": "0.639977899",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.049841,
     "max": 0.049841,
     "quality": "reported",
     "raw": "0.04984099",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.398598,
     "max": 0.398598,
     "quality": "reported",
     "raw": "0.398598351",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.395842,
     "max": 0.395842,
     "quality": "reported",
     "raw": "0.395841809",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.208,
     "max": 127.208,
     "quality": "reported",
     "raw": "1.2554487",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.715418,
     "max": 0.715418,
     "quality": "reported",
     "raw": "0.715418162",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/128",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19189A2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 128,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19189A2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 15:10:43:910 ,Experiment: 0,Test Point: 19189A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19189A2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 15:10:43:910 ,Experiment: 0,Test Point: 19189A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.395842,
     "max": 0.395842,
     "quality": "reported",
     "raw": "0.395841809",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.394925,
     "max": 0.394925,
     "quality": "reported",
     "raw": "0.394925333",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 128.863,
     "max": 128.863,
     "quality": "reported",
     "raw": "1.27177974",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/129",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19189A3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 129,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19189A3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 15:38:12:946 ,Experiment: 0,Test Point: 19189A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19189A3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 15:38:12:946 ,Experiment: 0,Test Point: 19189A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394925,
     "max": 0.394925,
     "quality": "reported",
     "raw": "0.394925333",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.394013,
     "max": 0.394013,
     "quality": "reported",
     "raw": "0.394012765",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 128.518,
     "max": 128.518,
     "quality": "reported",
     "raw": "1.26837744",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/130",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19189D1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 130,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19189D1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 16:43:57:469 ,Experiment: 0,Test Point: 19189D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189D1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19189D1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 16:43:57:469 ,Experiment: 0,Test Point: 19189D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189D1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1732.25,
     "max": 1732.25,
     "quality": "reported",
     "raw": "1732.245239",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.639901,
     "max": 0.639901,
     "quality": "reported",
     "raw": "0.639901307",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0531085,
     "max": 0.0531085,
     "quality": "reported",
     "raw": "0.053108488",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394013,
     "max": 0.394013,
     "quality": "reported",
     "raw": "0.394012765",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.391506,
     "max": 0.391506,
     "quality": "reported",
     "raw": "0.39150599",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 128.932,
     "max": 128.932,
     "quality": "reported",
     "raw": "1.2724602",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.700075,
     "max": 0.700075,
     "quality": "reported",
     "raw": "0.700075453",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/131",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19189A4",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 131,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19189A4_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 18:24:49:415 ,Experiment: 0,Test Point: 19189A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189A4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19189A4_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 18:24:49:415 ,Experiment: 0,Test Point: 19189A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189A4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.391506,
     "max": 0.391506,
     "quality": "reported",
     "raw": "0.39150599",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.390873,
     "max": 0.390873,
     "quality": "reported",
     "raw": "0.390872924",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 129.69,
     "max": 129.69,
     "quality": "reported",
     "raw": "1.27994526",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/132",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19189D2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 132,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19189D2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 18:50:58:249 ,Experiment: 0,Test Point: 19189D2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189D2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19189D2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 18:50:58:249 ,Experiment: 0,Test Point: 19189D2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189D2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.390873,
     "max": 0.390873,
     "quality": "reported",
     "raw": "0.390872924",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.390078,
     "max": 0.390078,
     "quality": "reported",
     "raw": "0.390078032",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 129.897,
     "max": 129.897,
     "quality": "reported",
     "raw": "1.28198664",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/133",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19189D3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 133,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19189D3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 19:26:54:058 ,Experiment: 0,Test Point: 19189D3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189D3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19189D3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 19:26:54:058 ,Experiment: 0,Test Point: 19189D3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189D3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1729.4,
     "max": 1729.4,
     "quality": "reported",
     "raw": "1729.397642",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.640305,
     "max": 0.640305,
     "quality": "reported",
     "raw": "0.640305493",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0531408,
     "max": 0.0531408,
     "quality": "reported",
     "raw": "0.053140778",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.390078,
     "max": 0.390078,
     "quality": "reported",
     "raw": "0.390078032",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.387709,
     "max": 0.387709,
     "quality": "reported",
     "raw": "0.387709109",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 130.104,
     "max": 130.104,
     "quality": "reported",
     "raw": "1.28402802",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.697977,
     "max": 0.697977,
     "quality": "reported",
     "raw": "0.697976581",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/134",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19189H1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 134,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19189H1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 19:56:50:380 ,Experiment: 0,Test Point: 19189H1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189H1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19189H1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 19:56:50:380 ,Experiment: 0,Test Point: 19189H1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189H1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2091.28,
     "max": 2091.28,
     "quality": "reported",
     "raw": "2091.280614",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.804911,
     "max": 0.804911,
     "quality": "reported",
     "raw": "0.804910768",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0836638,
     "max": 0.0836638,
     "quality": "reported",
     "raw": "0.083663751",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.387709,
     "max": 0.387709,
     "quality": "reported",
     "raw": "0.387709109",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.385199,
     "max": 0.385199,
     "quality": "reported",
     "raw": "0.385199469",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 130.725,
     "max": 130.725,
     "quality": "reported",
     "raw": "1.29015216",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.593356,
     "max": 0.593356,
     "quality": "reported",
     "raw": "0.593356334",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/135",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19189J1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 135,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19189J1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 21:04:31:909 ,Experiment: 0,Test Point: 19189J1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189J1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19189J1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 21:04:31:909 ,Experiment: 0,Test Point: 19189J1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189J1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2749.09,
     "max": 2749.09,
     "quality": "reported",
     "raw": "2749.091871",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.51865,
     "max": 2.51865,
     "quality": "reported",
     "raw": "2.518653468",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.501651,
     "max": 0.501651,
     "quality": "reported",
     "raw": "0.50165144",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.387159,
     "max": 0.387159,
     "quality": "reported",
     "raw": "0.387159045",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.383237,
     "max": 0.383237,
     "quality": "reported",
     "raw": "0.383237392",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 130.794,
     "max": 130.794,
     "quality": "reported",
     "raw": "1.29083262",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.195238,
     "max": 0.195238,
     "quality": "reported",
     "raw": "0.195237981",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/136",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19189J2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 136,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19189J2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 21:39:08:824 ,Experiment: 0,Test Point: 19189J2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189J2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19189J2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 21:39:08:824 ,Experiment: 0,Test Point: 19189J2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189J2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2743.97,
     "max": 2743.97,
     "quality": "reported",
     "raw": "2743.972871",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.51856,
     "max": 2.51856,
     "quality": "reported",
     "raw": "2.518559059",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.502431,
     "max": 0.502431,
     "quality": "reported",
     "raw": "0.50243099",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.383237,
     "max": 0.383237,
     "quality": "reported",
     "raw": "0.383237392",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.379652,
     "max": 0.379652,
     "quality": "reported",
     "raw": "0.379651533",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 131,
     "max": 131,
     "quality": "reported",
     "raw": "1.292874",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.193541,
     "max": 0.193541,
     "quality": "reported",
     "raw": "0.193540869",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/137",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19189J3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 137,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19189J3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 22:10:46:847 ,Experiment: 0,Test Point: 19189J3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189J3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19189J3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 22:10:46:847 ,Experiment: 0,Test Point: 19189J3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189J3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2738.53,
     "max": 2738.53,
     "quality": "reported",
     "raw": "2738.528449",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.51843,
     "max": 2.51843,
     "quality": "reported",
     "raw": "2.51842677",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.501949,
     "max": 0.501949,
     "quality": "reported",
     "raw": "0.501949374",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.379652,
     "max": 0.379652,
     "quality": "reported",
     "raw": "0.379651533",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.37598,
     "max": 0.37598,
     "quality": "reported",
     "raw": "0.375979956",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 131.138,
     "max": 131.138,
     "quality": "reported",
     "raw": "1.29423492",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.192279,
     "max": 0.192279,
     "quality": "reported",
     "raw": "0.192278512",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/138",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19189K1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 138,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19189K1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 22:38:53:467 ,Experiment: 0,Test Point: 19189K1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189K1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19189K1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 22:38:53:467 ,Experiment: 0,Test Point: 19189K1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189K1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2733.21,
     "max": 2733.21,
     "quality": "reported",
     "raw": "2733.213653",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.51844,
     "max": 2.51844,
     "quality": "reported",
     "raw": "2.518437817",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.50171,
     "max": 0.50171,
     "quality": "reported",
     "raw": "0.501710262",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.37598,
     "max": 0.37598,
     "quality": "reported",
     "raw": "0.375979956",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.372525,
     "max": 0.372525,
     "quality": "reported",
     "raw": "0.372524632",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 131.207,
     "max": 131.207,
     "quality": "reported",
     "raw": "1.29491538",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.190959,
     "max": 0.190959,
     "quality": "reported",
     "raw": "0.190959242",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/139",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19189K2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 139,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19189K2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 23:39:16:412 ,Experiment: 0,Test Point: 19189K2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189K2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19189K2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-08 189 23:39:16:412 ,Experiment: 0,Test Point: 19189K2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189K2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.372525,
     "max": 0.372525,
     "quality": "reported",
     "raw": "0.372524632",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.369302,
     "max": 0.369302,
     "quality": "reported",
     "raw": "0.369301945",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 131.276,
     "max": 131.276,
     "quality": "reported",
     "raw": "1.29559584",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/140",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19189K3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 140,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19189K3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-09 190 00:08:15:753 ,Experiment: 0,Test Point: 19189K3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189K3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19189K3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-09 190 00:08:15:753 ,Experiment: 0,Test Point: 19189K3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189K3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.369302,
     "max": 0.369302,
     "quality": "reported",
     "raw": "0.369301945",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.365498,
     "max": 0.365498,
     "quality": "reported",
     "raw": "0.365498172",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 131.345,
     "max": 131.345,
     "quality": "reported",
     "raw": "1.2962763",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/141",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19189P1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 141,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19189P1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-09 190 01:16:39:476 ,Experiment: 0,Test Point: 19189P1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189P1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19189P1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-09 190 01:16:39:476 ,Experiment: 0,Test Point: 19189P1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19189P1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.365498,
     "max": 0.365498,
     "quality": "reported",
     "raw": "0.365498172",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.361711,
     "max": 0.361711,
     "quality": "reported",
     "raw": "0.361710714",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 131.414,
     "max": 131.414,
     "quality": "reported",
     "raw": "1.29695676",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/142",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19196A1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 142,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19196A1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 16:17:39:770 ,Experiment: 0,Test Point: 19196A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19196A1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 16:17:39:770 ,Experiment: 0,Test Point: 19196A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2563.96,
     "max": 2563.96,
     "quality": "reported",
     "raw": "2563.958156",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.970534,
     "max": 0.970534,
     "quality": "reported",
     "raw": "0.970533778",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.206383,
     "max": 0.206383,
     "quality": "reported",
     "raw": "0.206382931",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.395566,
     "max": 0.395566,
     "quality": "reported",
     "raw": "0.395565745",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.394454,
     "max": 0.394454,
     "quality": "reported",
     "raw": "0.394453826",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.139,
     "max": 127.139,
     "quality": "reported",
     "raw": "1.25476824",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.376524,
     "max": 0.376524,
     "quality": "reported",
     "raw": "0.376523561",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/143",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19196A2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 143,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19196A2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 17:11:01:274 ,Experiment: 0,Test Point: 19196A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19196A2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 17:11:01:274 ,Experiment: 0,Test Point: 19196A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2562.14,
     "max": 2562.14,
     "quality": "reported",
     "raw": "2562.138751",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.972924,
     "max": 0.972924,
     "quality": "reported",
     "raw": "0.972923595",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.206579,
     "max": 0.206579,
     "quality": "reported",
     "raw": "0.206578976",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394454,
     "max": 0.394454,
     "quality": "reported",
     "raw": "0.394453826",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.392203,
     "max": 0.392203,
     "quality": "reported",
     "raw": "0.392202621",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.277,
     "max": 127.277,
     "quality": "reported",
     "raw": "1.25612916",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.375353,
     "max": 0.375353,
     "quality": "reported",
     "raw": "0.3753533",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/144",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19196A3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 144,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19196A3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 17:47:30:296 ,Experiment: 0,Test Point: 19196A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19196A3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 17:47:30:296 ,Experiment: 0,Test Point: 19196A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2559.66,
     "max": 2559.66,
     "quality": "reported",
     "raw": "2559.657152",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.971432,
     "max": 0.971432,
     "quality": "reported",
     "raw": "0.971432016",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.20648,
     "max": 0.20648,
     "quality": "reported",
     "raw": "0.206480193",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.392203,
     "max": 0.392203,
     "quality": "reported",
     "raw": "0.392202621",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.390755,
     "max": 0.390755,
     "quality": "reported",
     "raw": "0.390754941",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.553,
     "max": 127.553,
     "quality": "reported",
     "raw": "1.258851",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.37442,
     "max": 0.37442,
     "quality": "reported",
     "raw": "0.374419513",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/145",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19196B1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 145,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19196B1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 18:02:46:866 ,Experiment: 0,Test Point: 19196B1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19196B1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 18:02:46:866 ,Experiment: 0,Test Point: 19196B1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2653.07,
     "max": 2653.07,
     "quality": "reported",
     "raw": "2653.074142",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.970451,
     "max": 0.970451,
     "quality": "reported",
     "raw": "0.97045124",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.290348,
     "max": 0.290348,
     "quality": "reported",
     "raw": "0.290348497",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.390755,
     "max": 0.390755,
     "quality": "reported",
     "raw": "0.390754941",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.389783,
     "max": 0.389783,
     "quality": "reported",
     "raw": "0.389782968",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.76,
     "max": 127.76,
     "quality": "reported",
     "raw": "1.26089238",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.297943,
     "max": 0.297943,
     "quality": "reported",
     "raw": "0.297943073",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/146",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19196B2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 146,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19196B2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 18:16:26:342 ,Experiment: 0,Test Point: 19196B2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196B2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19196B2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 18:16:26:342 ,Experiment: 0,Test Point: 19196B2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196B2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2650.58,
     "max": 2650.58,
     "quality": "reported",
     "raw": "2650.57787",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.03443,
     "max": 1.03443,
     "quality": "reported",
     "raw": "1.034430835",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.289272,
     "max": 0.289272,
     "quality": "reported",
     "raw": "0.289272255",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.389783,
     "max": 0.389783,
     "quality": "reported",
     "raw": "0.389782968",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.388259,
     "max": 0.388259,
     "quality": "reported",
     "raw": "0.388258954",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.829,
     "max": 127.829,
     "quality": "reported",
     "raw": "1.26157284",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.298085,
     "max": 0.298085,
     "quality": "reported",
     "raw": "0.298085245",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/147",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19196B3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 147,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19196B3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 18:33:42:510 ,Experiment: 0,Test Point: 19196B3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196B3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19196B3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 18:33:42:510 ,Experiment: 0,Test Point: 19196B3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196B3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2648.38,
     "max": 2648.38,
     "quality": "reported",
     "raw": "2648.380267",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.13659,
     "max": 1.13659,
     "quality": "reported",
     "raw": "1.136590593",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.289204,
     "max": 0.289204,
     "quality": "reported",
     "raw": "0.289203816",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.388259,
     "max": 0.388259,
     "quality": "reported",
     "raw": "0.388258954",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.386588,
     "max": 0.386588,
     "quality": "reported",
     "raw": "0.3865883",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.898,
     "max": 127.898,
     "quality": "reported",
     "raw": "1.2622533",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.29732,
     "max": 0.29732,
     "quality": "reported",
     "raw": "0.297319679",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/148",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19196B4",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 148,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19196B4_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 19:01:07:153 ,Experiment: 0,Test Point: 19196B4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196B4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19196B4_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 19:01:07:153 ,Experiment: 0,Test Point: 19196B4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196B4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2645.92,
     "max": 2645.92,
     "quality": "reported",
     "raw": "2645.921949",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.13666,
     "max": 1.13666,
     "quality": "reported",
     "raw": "1.136661184",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.289194,
     "max": 0.289194,
     "quality": "reported",
     "raw": "0.289194207",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.386588,
     "max": 0.386588,
     "quality": "reported",
     "raw": "0.3865883",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.384642,
     "max": 0.384642,
     "quality": "reported",
     "raw": "0.384641571",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.967,
     "max": 127.967,
     "quality": "reported",
     "raw": "1.26293376",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.296401,
     "max": 0.296401,
     "quality": "reported",
     "raw": "0.296400966",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/149",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19196C1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 149,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19196C1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 19:25:47:016 ,Experiment: 0,Test Point: 19196C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19196C1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 19:25:47:016 ,Experiment: 0,Test Point: 19196C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2740.9,
     "max": 2740.9,
     "quality": "reported",
     "raw": "2740.901303",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.22425,
     "max": 1.22425,
     "quality": "reported",
     "raw": "1.224250736",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.487538,
     "max": 0.487538,
     "quality": "reported",
     "raw": "0.487537979",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.384642,
     "max": 0.384642,
     "quality": "reported",
     "raw": "0.384641571",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.383088,
     "max": 0.383088,
     "quality": "reported",
     "raw": "0.383088242",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 128.105,
     "max": 128.105,
     "quality": "reported",
     "raw": "1.26429468",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.199236,
     "max": 0.199236,
     "quality": "reported",
     "raw": "0.1992359",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/150",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19196C2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 150,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19196C2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 19:53:09:464 ,Experiment: 0,Test Point: 19196C2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196C2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19196C2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 19:53:09:464 ,Experiment: 0,Test Point: 19196C2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196C2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2738.33,
     "max": 2738.33,
     "quality": "reported",
     "raw": "2738.328597",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.22464,
     "max": 1.22464,
     "quality": "reported",
     "raw": "1.22463832",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.487402,
     "max": 0.487402,
     "quality": "reported",
     "raw": "0.487401983",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.383088,
     "max": 0.383088,
     "quality": "reported",
     "raw": "0.383088242",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.381106,
     "max": 0.381106,
     "quality": "reported",
     "raw": "0.381106161",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 128.174,
     "max": 128.174,
     "quality": "reported",
     "raw": "1.26497514",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.198583,
     "max": 0.198583,
     "quality": "reported",
     "raw": "0.198583027",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/151",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19196D1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 151,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19196D1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 20:42:30:364 ,Experiment: 0,Test Point: 19196D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196D1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19196D1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 20:42:30:364 ,Experiment: 0,Test Point: 19196D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196D1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2817.8,
     "max": 2817.8,
     "quality": "reported",
     "raw": "2817.79709",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.22408,
     "max": 1.22408,
     "quality": "reported",
     "raw": "1.224076921",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.386116,
     "max": 0.386116,
     "quality": "reported",
     "raw": "0.386116096",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.38427,
     "max": 0.38427,
     "quality": "reported",
     "raw": "0.3842703",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.967,
     "max": 127.967,
     "quality": "reported",
     "raw": "1.26293376",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.108497,
     "max": 0.108497,
     "quality": "reported",
     "raw": "0.108496691",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/152",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19196D2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 152,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19196D2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 21:08:40:109 ,Experiment: 0,Test Point: 19196D2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196D2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19196D2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 21:08:40:109 ,Experiment: 0,Test Point: 19196D2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196D2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2815.13,
     "max": 2815.13,
     "quality": "reported",
     "raw": "2815.126373",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.22411,
     "max": 1.22411,
     "quality": "reported",
     "raw": "1.224106888",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.38427,
     "max": 0.38427,
     "quality": "reported",
     "raw": "0.3842703",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.382215,
     "max": 0.382215,
     "quality": "reported",
     "raw": "0.382214792",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.967,
     "max": 127.967,
     "quality": "reported",
     "raw": "1.26293376",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.108032,
     "max": 0.108032,
     "quality": "reported",
     "raw": "0.10803205",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/153",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19196F1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 153,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19196F1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 21:49:43:534 ,Experiment: 0,Test Point: 19196F1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19196F1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 21:49:43:534 ,Experiment: 0,Test Point: 19196F1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.382215,
     "max": 0.382215,
     "quality": "reported",
     "raw": "0.382214792",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.381649,
     "max": 0.381649,
     "quality": "reported",
     "raw": "0.381649393",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 127.898,
     "max": 127.898,
     "quality": "reported",
     "raw": "1.2622533",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/154",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19196N1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 154,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19196N1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 23:04:01:588 ,Experiment: 0,Test Point: 19196N1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196N1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19196N1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-15 196 23:04:01:588 ,Experiment: 0,Test Point: 19196N1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19196N1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2811.79,
     "max": 2811.79,
     "quality": "reported",
     "raw": "2811.788798",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.970168,
     "max": 0.970168,
     "quality": "reported",
     "raw": "0.970168202",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.381649,
     "max": 0.381649,
     "quality": "reported",
     "raw": "0.381649393",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.380622,
     "max": 0.380622,
     "quality": "reported",
     "raw": "0.380621625",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 128.036,
     "max": 128.036,
     "quality": "reported",
     "raw": "1.26361422",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.107529,
     "max": 0.107529,
     "quality": "reported",
     "raw": "0.107529337",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/155",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19200A1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 155,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19200A1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-19 200 17:33:57:085 ,Experiment: 0,Test Point: 19200A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19200A1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-19 200 17:33:57:085 ,Experiment: 0,Test Point: 19200A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2641.75,
     "max": 2641.75,
     "quality": "reported",
     "raw": "2641.750142",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.51759,
     "max": 2.51759,
     "quality": "reported",
     "raw": "2.517590726",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.288732,
     "max": 0.288732,
     "quality": "reported",
     "raw": "0.288731798",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394713,
     "max": 0.394713,
     "quality": "reported",
     "raw": "0.394712947",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.392546,
     "max": 0.392546,
     "quality": "reported",
     "raw": "0.392546384",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.56,
     "max": 101.56,
     "quality": "reported",
     "raw": "1.00231758",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.300817,
     "max": 0.300817,
     "quality": "reported",
     "raw": "0.300817379",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/156",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19200A2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 156,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19200A2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-19 200 18:16:49:472 ,Experiment: 0,Test Point: 19200A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19200A2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-19 200 18:16:49:472 ,Experiment: 0,Test Point: 19200A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2642.21,
     "max": 2642.21,
     "quality": "reported",
     "raw": "2642.211152",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.50124,
     "max": 0.50124,
     "quality": "reported",
     "raw": "0.501240115",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.291801,
     "max": 0.291801,
     "quality": "reported",
     "raw": "0.291801471",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.392546,
     "max": 0.392546,
     "quality": "reported",
     "raw": "0.392546384",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.391981,
     "max": 0.391981,
     "quality": "reported",
     "raw": "0.391981265",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.767,
     "max": 101.767,
     "quality": "reported",
     "raw": "1.00435896",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.297909,
     "max": 0.297909,
     "quality": "reported",
     "raw": "0.297908948",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/157",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19200A3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 157,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19200A3_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-19 200 18:45:12:497 ,Experiment: 0,Test Point: 19200A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19200A3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-19 200 18:45:12:497 ,Experiment: 0,Test Point: 19200A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2640.79,
     "max": 2640.79,
     "quality": "reported",
     "raw": "2640.792505",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.76885,
     "max": 0.76885,
     "quality": "reported",
     "raw": "0.768849718",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.291442,
     "max": 0.291442,
     "quality": "reported",
     "raw": "0.291441968",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.391981,
     "max": 0.391981,
     "quality": "reported",
     "raw": "0.391981265",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.390566,
     "max": 0.390566,
     "quality": "reported",
     "raw": "0.390565564",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.767,
     "max": 101.767,
     "quality": "reported",
     "raw": "1.00435896",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.297666,
     "max": 0.297666,
     "quality": "reported",
     "raw": "0.29766611",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/158",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19200A4",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 158,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19200A4_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-19 200 19:03:28:854 ,Experiment: 0,Test Point: 19200A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200A4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19200A4_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-19 200 19:03:28:854 ,Experiment: 0,Test Point: 19200A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200A4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2545.61,
     "max": 2545.61,
     "quality": "reported",
     "raw": "2545.605845",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.769435,
     "max": 0.769435,
     "quality": "reported",
     "raw": "0.769434756",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.206538,
     "max": 0.206538,
     "quality": "reported",
     "raw": "0.206537848",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.390566,
     "max": 0.390566,
     "quality": "reported",
     "raw": "0.390565564",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.388965,
     "max": 0.388965,
     "quality": "reported",
     "raw": "0.388965224",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.905,
     "max": 101.905,
     "quality": "reported",
     "raw": "1.00571988",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.373382,
     "max": 0.373382,
     "quality": "reported",
     "raw": "0.373381597",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/159",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19200A5",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 159,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19200A5_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-19 200 19:20:37:767 ,Experiment: 0,Test Point: 19200A5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200A5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19200A5_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-19 200 19:20:37:767 ,Experiment: 0,Test Point: 19200A5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200A5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2543.17,
     "max": 2543.17,
     "quality": "reported",
     "raw": "2543.174798",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.971769,
     "max": 0.971769,
     "quality": "reported",
     "raw": "0.971769238",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.206428,
     "max": 0.206428,
     "quality": "reported",
     "raw": "0.206428215",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.388965,
     "max": 0.388965,
     "quality": "reported",
     "raw": "0.388965224",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.386954,
     "max": 0.386954,
     "quality": "reported",
     "raw": "0.386954381",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.974,
     "max": 101.974,
     "quality": "reported",
     "raw": "1.00640034",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.372477,
     "max": 0.372477,
     "quality": "reported",
     "raw": "0.372477065",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/160",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19200A6",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 160,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19200A6_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-19 200 19:59:56:908 ,Experiment: 0,Test Point: 19200A6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200A6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19200A6_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-19 200 19:59:56:908 ,Experiment: 0,Test Point: 19200A6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200A6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2358.19,
     "max": 2358.19,
     "quality": "reported",
     "raw": "2358.191575",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.972151,
     "max": 0.972151,
     "quality": "reported",
     "raw": "0.972151383",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.130824,
     "max": 0.130824,
     "quality": "reported",
     "raw": "0.130824421",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.386954,
     "max": 0.386954,
     "quality": "reported",
     "raw": "0.386954381",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.384497,
     "max": 0.384497,
     "quality": "reported",
     "raw": "0.384496992",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.111,
     "max": 102.111,
     "quality": "reported",
     "raw": "1.00776126",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.482262,
     "max": 0.482262,
     "quality": "reported",
     "raw": "0.482262201",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/161",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19200A7",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 161,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19200A7_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-19 200 20:17:13:070 ,Experiment: 0,Test Point: 19200A7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200A7_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19200A7_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-19 200 20:17:13:070 ,Experiment: 0,Test Point: 19200A7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200A7_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2354.71,
     "max": 2354.71,
     "quality": "reported",
     "raw": "2354.71168",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.768759,
     "max": 0.768759,
     "quality": "reported",
     "raw": "0.768759439",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.130645,
     "max": 0.130645,
     "quality": "reported",
     "raw": "0.130644531",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.384497,
     "max": 0.384497,
     "quality": "reported",
     "raw": "0.384496992",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.382567,
     "max": 0.382567,
     "quality": "reported",
     "raw": "0.382566898",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.456,
     "max": 102.456,
     "quality": "reported",
     "raw": "1.01116356",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.481256,
     "max": 0.481256,
     "quality": "reported",
     "raw": "0.481255923",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/162",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19200A8",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 162,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.1,
     "max": 5.1,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.100000",
     "column": "row 0, column PMT 1 Gain: 5.100000",
     "note": "From NASA's file PSI-10_Raw Data_19200A8_data.csv, row 0, column PMT 1 Gain: 5.100000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-19 200 21:04:23:437 ,Experiment: 0,Test Point: 19200A8,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.100000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200A8_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19200A8_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-19 200 21:04:23:437 ,Experiment: 0,Test Point: 19200A8,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.100000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200A8_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2349.88,
     "max": 2349.88,
     "quality": "reported",
     "raw": "2349.883528",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.771618,
     "max": 0.771618,
     "quality": "reported",
     "raw": "0.771617797",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.130961,
     "max": 0.130961,
     "quality": "reported",
     "raw": "0.13096104",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.382567,
     "max": 0.382567,
     "quality": "reported",
     "raw": "0.382566898",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.375117,
     "max": 0.375117,
     "quality": "reported",
     "raw": "0.375117028",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.594,
     "max": 102.594,
     "quality": "reported",
     "raw": "1.01252448",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.47774,
     "max": 0.47774,
     "quality": "reported",
     "raw": "0.477739828",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/163",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19200K1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 163,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-10_Raw Data_19200K1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-20 201 00:25:05:935 ,Experiment: 0,Test Point: 19200K1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200K1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19200K1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-20 201 00:25:05:935 ,Experiment: 0,Test Point: 19200K1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200K1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2481.45,
     "max": 2481.45,
     "quality": "reported",
     "raw": "2481.449752",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.51684,
     "max": 2.51684,
     "quality": "reported",
     "raw": "2.516836284",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.288653,
     "max": 0.288653,
     "quality": "reported",
     "raw": "0.288653374",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.299433,
     "max": 0.299433,
     "quality": "reported",
     "raw": "0.299432834",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.29743,
     "max": 0.29743,
     "quality": "reported",
     "raw": "0.297429735",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.491,
     "max": 101.491,
     "quality": "reported",
     "raw": "1.00163712",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.248422,
     "max": 0.248422,
     "quality": "reported",
     "raw": "0.24842156",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/164",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19200H1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 164,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.2,
     "max": 5.2,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.200000",
     "column": "row 0, column PMT 1 Gain: 5.200000",
     "note": "From NASA's file PSI-10_Raw Data_19200H1_data.csv, row 0, column PMT 1 Gain: 5.200000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-20 201 00:42:24:703 ,Experiment: 0,Test Point: 19200H1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.200000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200H1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19200H1_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-20 201 00:42:24:703 ,Experiment: 0,Test Point: 19200H1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.200000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200H1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2477.75,
     "max": 2477.75,
     "quality": "reported",
     "raw": "2477.750681",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.770938,
     "max": 0.770938,
     "quality": "reported",
     "raw": "0.770937841",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.291618,
     "max": 0.291618,
     "quality": "reported",
     "raw": "0.291617707",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.29743,
     "max": 0.29743,
     "quality": "reported",
     "raw": "0.297429735",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.293952,
     "max": 0.293952,
     "quality": "reported",
     "raw": "0.293952369",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.629,
     "max": 101.629,
     "quality": "reported",
     "raw": "1.00299804",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.244879,
     "max": 0.244879,
     "quality": "reported",
     "raw": "0.24487885",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/165",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19200H2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 165,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.2,
     "max": 5.2,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.200000",
     "column": "row 0, column PMT 1 Gain: 5.200000",
     "note": "From NASA's file PSI-10_Raw Data_19200H2_data.csv, row 0, column PMT 1 Gain: 5.200000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-20 201 00:59:25:948 ,Experiment: 0,Test Point: 19200H2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.200000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200H2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19200H2_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-20 201 00:59:25:948 ,Experiment: 0,Test Point: 19200H2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.200000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200H2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2199.05,
     "max": 2199.05,
     "quality": "reported",
     "raw": "2199.052834",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.771787,
     "max": 0.771787,
     "quality": "reported",
     "raw": "0.771787459",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.131034,
     "max": 0.131034,
     "quality": "reported",
     "raw": "0.131034408",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.293952,
     "max": 0.293952,
     "quality": "reported",
     "raw": "0.293952369",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.289423,
     "max": 0.289423,
     "quality": "reported",
     "raw": "0.289422616",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.836,
     "max": 101.836,
     "quality": "reported",
     "raw": "1.00503942",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.416,
     "max": 0.416,
     "quality": "reported",
     "raw": "0.416000398",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/166",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19200H3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 166,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.2,
     "max": 5.2,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.200000",
     "column": "row 0, column PMT 1 Gain: 5.200000",
     "note": "From NASA's file PSI-10_Raw Data_19200H3_data.csv, row 0, column PMT 1 Gain: 5.200000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-20 201 01:54:02:124 ,Experiment: 0,Test Point: 19200H3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.200000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200H3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.25,
     "max": 5.25,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.250000",
     "column": "row 0, column PMT 3 Gain: 5.250000",
     "note": "From NASA's file PSI-10_Raw Data_19200H3_data.csv, row 0, column PMT 3 Gain: 5.250000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-20 201 01:54:02:124 ,Experiment: 0,Test Point: 19200H3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.200000,PMT 2 Gain: 5.250000,PMT 3 Gain: 5.250000",
     "evidence_source": "file:PSI-10_Raw Data_19200H3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2183.72,
     "max": 2183.72,
     "quality": "reported",
     "raw": "2183.717314",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.582522,
     "max": 0.582522,
     "quality": "reported",
     "raw": "0.582522046",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.13102,
     "max": 0.13102,
     "quality": "reported",
     "raw": "0.131020039",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.289423,
     "max": 0.289423,
     "quality": "reported",
     "raw": "0.289422616",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.280273,
     "max": 0.280273,
     "quality": "reported",
     "raw": "0.280273169",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.594,
     "max": 102.594,
     "quality": "reported",
     "raw": "1.01252448",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.410501,
     "max": 0.410501,
     "quality": "reported",
     "raw": "0.410501243",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/167",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19206A1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 167,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "adiabatic_flame_temp_k": {
     "min": 2206.54,
     "max": 2206.54,
     "quality": "reported",
     "raw": "2206.542885",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.50775,
     "max": 2.50775,
     "quality": "reported",
     "raw": "2.50774917",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.288099,
     "max": 0.288099,
     "quality": "reported",
     "raw": "0.288098529",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.209913,
     "max": 0.209913,
     "quality": "reported",
     "raw": "0.209912572",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.208976,
     "max": 0.208976,
     "quality": "reported",
     "raw": "0.208975718",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.629,
     "max": 101.629,
     "quality": "reported",
     "raw": "1.00299804",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.190473,
     "max": 0.190473,
     "quality": "reported",
     "raw": "0.190473037",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/168",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19206A5",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 168,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "adiabatic_flame_temp_k": {
     "min": 2203.11,
     "max": 2203.11,
     "quality": "reported",
     "raw": "2203.113936",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.50651,
     "max": 2.50651,
     "quality": "reported",
     "raw": "2.506510104",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.288336,
     "max": 0.288336,
     "quality": "reported",
     "raw": "0.288336172",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.208976,
     "max": 0.208976,
     "quality": "reported",
     "raw": "0.208975718",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.208214,
     "max": 0.208214,
     "quality": "reported",
     "raw": "0.208213735",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 101.974,
     "max": 101.974,
     "quality": "reported",
     "raw": "1.00640034",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.189739,
     "max": 0.189739,
     "quality": "reported",
     "raw": "0.18973854",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/169",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19206G1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 169,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "adiabatic_flame_temp_k": {
     "min": 2357.01,
     "max": 2357.01,
     "quality": "reported",
     "raw": "2357.014038",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.51027,
     "max": 2.51027,
     "quality": "reported",
     "raw": "2.510271973",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.208214,
     "max": 0.208214,
     "quality": "reported",
     "raw": "0.208213735",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.207381,
     "max": 0.207381,
     "quality": "reported",
     "raw": "0.207380999",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.111,
     "max": 102.111,
     "quality": "reported",
     "raw": "1.00776126",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.063029,
     "max": 0.063029,
     "quality": "reported",
     "raw": "0.063028998",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/170",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19206G2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 170,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "adiabatic_flame_temp_k": {
     "min": 2353.77,
     "max": 2353.77,
     "quality": "reported",
     "raw": "2353.774342",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.93865,
     "max": 1.93865,
     "quality": "reported",
     "raw": "1.938647011",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.207381,
     "max": 0.207381,
     "quality": "reported",
     "raw": "0.207380999",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.206772,
     "max": 0.206772,
     "quality": "reported",
     "raw": "0.206772012",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.18,
     "max": 102.18,
     "quality": "reported",
     "raw": "1.00844172",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.06283,
     "max": 0.06283,
     "quality": "reported",
     "raw": "0.062829973",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/171",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19206G3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 171,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "adiabatic_flame_temp_k": {
     "min": 2351.09,
     "max": 2351.09,
     "quality": "reported",
     "raw": "2351.085842",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.2944,
     "max": 1.2944,
     "quality": "reported",
     "raw": "1.294396734",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.206772,
     "max": 0.206772,
     "quality": "reported",
     "raw": "0.206772012",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.206182,
     "max": 0.206182,
     "quality": "reported",
     "raw": "0.206181778",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.18,
     "max": 102.18,
     "quality": "reported",
     "raw": "1.00844172",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0626643,
     "max": 0.0626643,
     "quality": "reported",
     "raw": "0.062664329",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/172",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19206G4",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 172,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "adiabatic_flame_temp_k": {
     "min": 2348.14,
     "max": 2348.14,
     "quality": "reported",
     "raw": "2348.135318",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.804344,
     "max": 0.804344,
     "quality": "reported",
     "raw": "0.80434355",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.206182,
     "max": 0.206182,
     "quality": "reported",
     "raw": "0.206181778",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.20546,
     "max": 0.20546,
     "quality": "reported",
     "raw": "0.20545971",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.18,
     "max": 102.18,
     "quality": "reported",
     "raw": "1.00844172",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.062483,
     "max": 0.062483,
     "quality": "reported",
     "raw": "0.062482967",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/173",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19206G5",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 173,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "adiabatic_flame_temp_k": {
     "min": 2344.58,
     "max": 2344.58,
     "quality": "reported",
     "raw": "2344.580687",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.476252,
     "max": 0.476252,
     "quality": "reported",
     "raw": "0.476252464",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.20546,
     "max": 0.20546,
     "quality": "reported",
     "raw": "0.20545971",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.204624,
     "max": 0.204624,
     "quality": "reported",
     "raw": "0.204624224",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.18,
     "max": 102.18,
     "quality": "reported",
     "raw": "1.00844172",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0622676,
     "max": 0.0622676,
     "quality": "reported",
     "raw": "0.062267576",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/174",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19206L2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 174,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.2,
     "max": 5.2,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.200000",
     "column": "row 0, column PMT 1 Gain: 5.200000",
     "note": "From NASA's file PSI-10_Raw Data_19206L2_data.csv, row 0, column PMT 1 Gain: 5.200000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-25 206 19:36:21:918 ,Experiment: 0,Test Point: 19206L2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.200000,PMT 2 Gain: 5.400000,PMT 3 Gain: 5.400000",
     "evidence_source": "file:PSI-10_Raw Data_19206L2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.4,
     "max": 5.4,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.400000",
     "column": "row 0, column PMT 3 Gain: 5.400000",
     "note": "From NASA's file PSI-10_Raw Data_19206L2_data.csv, row 0, column PMT 3 Gain: 5.400000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-25 206 19:36:21:918 ,Experiment: 0,Test Point: 19206L2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.200000,PMT 2 Gain: 5.400000,PMT 3 Gain: 5.400000",
     "evidence_source": "file:PSI-10_Raw Data_19206L2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2183.8,
     "max": 2183.8,
     "quality": "reported",
     "raw": "2183.802419",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.9354,
     "max": 1.9354,
     "quality": "reported",
     "raw": "1.935400709",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.288274,
     "max": 0.288274,
     "quality": "reported",
     "raw": "0.288274032",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.204523,
     "max": 0.204523,
     "quality": "reported",
     "raw": "0.20452292",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.203933,
     "max": 0.203933,
     "quality": "reported",
     "raw": "0.203933489",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.249,
     "max": 102.249,
     "quality": "reported",
     "raw": "1.00912218",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.186632,
     "max": 0.186632,
     "quality": "reported",
     "raw": "0.186632172",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/175",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19206L3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 175,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.2,
     "max": 5.2,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.200000",
     "column": "row 0, column PMT 1 Gain: 5.200000",
     "note": "From NASA's file PSI-10_Raw Data_19206L3_data.csv, row 0, column PMT 1 Gain: 5.200000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-25 206 19:55:38:480 ,Experiment: 0,Test Point: 19206L3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.200000,PMT 2 Gain: 5.400000,PMT 3 Gain: 5.400000",
     "evidence_source": "file:PSI-10_Raw Data_19206L3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.4,
     "max": 5.4,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.400000",
     "column": "row 0, column PMT 3 Gain: 5.400000",
     "note": "From NASA's file PSI-10_Raw Data_19206L3_data.csv, row 0, column PMT 3 Gain: 5.400000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-25 206 19:55:38:480 ,Experiment: 0,Test Point: 19206L3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.200000,PMT 2 Gain: 5.400000,PMT 3 Gain: 5.400000",
     "evidence_source": "file:PSI-10_Raw Data_19206L3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2182.28,
     "max": 2182.28,
     "quality": "reported",
     "raw": "2182.279113",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.29279,
     "max": 1.29279,
     "quality": "reported",
     "raw": "1.292786791",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.289502,
     "max": 0.289502,
     "quality": "reported",
     "raw": "0.289501653",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.203933,
     "max": 0.203933,
     "quality": "reported",
     "raw": "0.203933489",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.203433,
     "max": 0.203433,
     "quality": "reported",
     "raw": "0.203433022",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.318,
     "max": 102.318,
     "quality": "reported",
     "raw": "1.00980264",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.185595,
     "max": 0.185595,
     "quality": "reported",
     "raw": "0.185595214",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/176",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19206L4",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 176,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.2,
     "max": 5.2,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.200000",
     "column": "row 0, column PMT 1 Gain: 5.200000",
     "note": "From NASA's file PSI-10_Raw Data_19206L4_data.csv, row 0, column PMT 1 Gain: 5.200000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-25 206 20:10:17:852 ,Experiment: 0,Test Point: 19206L4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.200000,PMT 2 Gain: 5.400000,PMT 3 Gain: 5.400000",
     "evidence_source": "file:PSI-10_Raw Data_19206L4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.4,
     "max": 5.4,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.400000",
     "column": "row 0, column PMT 3 Gain: 5.400000",
     "note": "From NASA's file PSI-10_Raw Data_19206L4_data.csv, row 0, column PMT 3 Gain: 5.400000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-25 206 20:10:17:852 ,Experiment: 0,Test Point: 19206L4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.200000,PMT 2 Gain: 5.400000,PMT 3 Gain: 5.400000",
     "evidence_source": "file:PSI-10_Raw Data_19206L4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2180.16,
     "max": 2180.16,
     "quality": "reported",
     "raw": "2180.155709",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.802935,
     "max": 0.802935,
     "quality": "reported",
     "raw": "0.80293498",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.289791,
     "max": 0.289791,
     "quality": "reported",
     "raw": "0.289790644",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.203433,
     "max": 0.203433,
     "quality": "reported",
     "raw": "0.203433022",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.202895,
     "max": 0.202895,
     "quality": "reported",
     "raw": "0.202894626",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.387,
     "max": 102.387,
     "quality": "reported",
     "raw": "1.0104831",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.18507,
     "max": 0.18507,
     "quality": "reported",
     "raw": "0.185069928",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/177",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19206L6",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 177,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.2,
     "max": 5.2,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.200000",
     "column": "row 0, column PMT 1 Gain: 5.200000",
     "note": "From NASA's file PSI-10_Raw Data_19206L6_data.csv, row 0, column PMT 1 Gain: 5.200000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-25 206 21:30:11:363 ,Experiment: 0,Test Point: 19206L6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.200000,PMT 2 Gain: 5.400000,PMT 3 Gain: 5.400000",
     "evidence_source": "file:PSI-10_Raw Data_19206L6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.4,
     "max": 5.4,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.400000",
     "column": "row 0, column PMT 3 Gain: 5.400000",
     "note": "From NASA's file PSI-10_Raw Data_19206L6_data.csv, row 0, column PMT 3 Gain: 5.400000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-25 206 21:30:11:363 ,Experiment: 0,Test Point: 19206L6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.200000,PMT 2 Gain: 5.400000,PMT 3 Gain: 5.400000",
     "evidence_source": "file:PSI-10_Raw Data_19206L6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2178.51,
     "max": 2178.51,
     "quality": "reported",
     "raw": "2178.509374",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.577849,
     "max": 0.577849,
     "quality": "reported",
     "raw": "0.577849182",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.291209,
     "max": 0.291209,
     "quality": "reported",
     "raw": "0.291209439",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.20288,
     "max": 0.20288,
     "quality": "reported",
     "raw": "0.202879725",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.20226,
     "max": 0.20226,
     "quality": "reported",
     "raw": "0.202260063",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.387,
     "max": 102.387,
     "quality": "reported",
     "raw": "1.0104831",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.183907,
     "max": 0.183907,
     "quality": "reported",
     "raw": "0.183907052",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/178",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19206G7",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 178,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "adiabatic_flame_temp_k": {
     "min": 2329.81,
     "max": 2329.81,
     "quality": "reported",
     "raw": "2329.80584",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.374444,
     "max": 0.374444,
     "quality": "reported",
     "raw": "0.374443905",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.202246,
     "max": 0.202246,
     "quality": "reported",
     "raw": "0.2022457",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.201524,
     "max": 0.201524,
     "quality": "reported",
     "raw": "0.201524174",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.456,
     "max": 102.456,
     "quality": "reported",
     "raw": "1.01116356",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0613929,
     "max": 0.0613929,
     "quality": "reported",
     "raw": "0.061392928",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/179",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19206K1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 179,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.201524,
     "max": 0.201524,
     "quality": "reported",
     "raw": "0.201524174",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.201046,
     "max": 0.201046,
     "quality": "reported",
     "raw": "0.201046071",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.456,
     "max": 102.456,
     "quality": "reported",
     "raw": "1.01116356",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/180",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19206K2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 180,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.201046,
     "max": 0.201046,
     "quality": "reported",
     "raw": "0.201046071",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.200582,
     "max": 0.200582,
     "quality": "reported",
     "raw": "0.20058213",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.525,
     "max": 102.525,
     "quality": "reported",
     "raw": "1.01184402",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/181",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19206G8",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 181,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.200582,
     "max": 0.200582,
     "quality": "reported",
     "raw": "0.20058213",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.200486,
     "max": 0.200486,
     "quality": "reported",
     "raw": "0.200485764",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.525,
     "max": 102.525,
     "quality": "reported",
     "raw": "1.01184402",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/182",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19206G9",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 182,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "adiabatic_flame_temp_k": {
     "min": 2321.72,
     "max": 2321.72,
     "quality": "reported",
     "raw": "2321.720993",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.312674,
     "max": 0.312674,
     "quality": "reported",
     "raw": "0.312674102",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.200486,
     "max": 0.200486,
     "quality": "reported",
     "raw": "0.200485764",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.199859,
     "max": 0.199859,
     "quality": "reported",
     "raw": "0.199858989",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.456,
     "max": 102.456,
     "quality": "reported",
     "raw": "1.01116356",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0609175,
     "max": 0.0609175,
     "quality": "reported",
     "raw": "0.060917462",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/183",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19206N1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 183,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.2,
     "max": 5.2,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.200000",
     "column": "row 0, column PMT 1 Gain: 5.200000",
     "note": "From NASA's file PSI-10_Raw Data_19206N1_data.csv, row 0, column PMT 1 Gain: 5.200000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-26 207 00:36:23:155 ,Experiment: 0,Test Point: 19206N1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.200000,PMT 2 Gain: 5.400000,PMT 3 Gain: 5.400000",
     "evidence_source": "file:PSI-10_Raw Data_19206N1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.4,
     "max": 5.4,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.400000",
     "column": "row 0, column PMT 3 Gain: 5.400000",
     "note": "From NASA's file PSI-10_Raw Data_19206N1_data.csv, row 0, column PMT 3 Gain: 5.400000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2019-07-26 207 00:36:23:155 ,Experiment: 0,Test Point: 19206N1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 0.500000,MFCA3 Gas: 4,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 0,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.200000,PMT 2 Gain: 5.400000,PMT 3 Gain: 5.400000",
     "evidence_source": "file:PSI-10_Raw Data_19206N1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.199859,
     "max": 0.199859,
     "quality": "reported",
     "raw": "0.199858989",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.199689,
     "max": 0.199689,
     "quality": "reported",
     "raw": "0.19968905",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.525,
     "max": 102.525,
     "quality": "reported",
     "raw": "1.01184402",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/184",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19206H1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 184,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.199689,
     "max": 0.199689,
     "quality": "reported",
     "raw": "0.19968905",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.199163,
     "max": 0.199163,
     "quality": "reported",
     "raw": "0.199163298",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.456,
     "max": 102.456,
     "quality": "reported",
     "raw": "1.01116356",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/185",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19206H2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 185,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.199163,
     "max": 0.199163,
     "quality": "reported",
     "raw": "0.199163298",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.198596,
     "max": 0.198596,
     "quality": "reported",
     "raw": "0.198596375",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.456,
     "max": 102.456,
     "quality": "reported",
     "raw": "1.01116356",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/186",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19206H3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 186,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.198596,
     "max": 0.198596,
     "quality": "reported",
     "raw": "0.198596375",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.198048,
     "max": 0.198048,
     "quality": "reported",
     "raw": "0.198048193",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.525,
     "max": 102.525,
     "quality": "reported",
     "raw": "1.01184402",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/187",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "19206H4",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 187,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "adiabatic_flame_temp_k": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "C2H4",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.198048,
     "max": 0.198048,
     "quality": "reported",
     "raw": "0.198048193",
     "column": "XO2 (init)"
    },
    "o2_fraction_final": {
     "min": 0.197475,
     "max": 0.197475,
     "quality": "reported",
     "raw": "0.197475265",
     "column": "XO2 (final)"
    },
    "pressure_kpa": {
     "min": 102.525,
     "max": 102.525,
     "quality": "reported",
     "raw": "1.01184402",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "text": "RAMP",
     "quality": "reported",
     "raw": "RAMP",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/188",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21301A1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 188,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21301A1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 14:54:35:478 ,Experiment: 5,Test Point: 21301A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21301A1_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 14:54:35:478 ,Experiment: 5,Test Point: 21301A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2734.95,
     "max": 2734.95,
     "quality": "reported",
     "raw": "2734.953406",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "C3H8",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.2,
     "max": 1.2,
     "quality": "reported",
     "raw": "1.2",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2 (init)"
    },
    "pressure_kpa": {
     "min": 94.4321,
     "max": 94.4321,
     "quality": "reported",
     "raw": "0.931972789",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.106462,
     "max": 0.106462,
     "quality": "reported",
     "raw": "0.106461571",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/189",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21301A2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 189,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21301A2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 15:06:37:141 ,Experiment: 5,Test Point: 21301A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21301A2_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 15:06:37:141 ,Experiment: 5,Test Point: 21301A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2734.95,
     "max": 2734.95,
     "quality": "reported",
     "raw": "2734.953406",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "C3H8",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.2,
     "max": 1.2,
     "quality": "reported",
     "raw": "1.2",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2 (init)"
    },
    "pressure_kpa": {
     "min": 94.4321,
     "max": 94.4321,
     "quality": "reported",
     "raw": "0.931972789",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.106462,
     "max": 0.106462,
     "quality": "reported",
     "raw": "0.106461571",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/190",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21301A3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 190,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21301A3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 15:27:19:398 ,Experiment: 5,Test Point: 21301A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21301A3_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 15:27:19:398 ,Experiment: 5,Test Point: 21301A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2734.95,
     "max": 2734.95,
     "quality": "reported",
     "raw": "2734.953406",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "C3H8",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.75,
     "max": 1.75,
     "quality": "reported",
     "raw": "1.75",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2 (init)"
    },
    "pressure_kpa": {
     "min": 94.4321,
     "max": 94.4321,
     "quality": "reported",
     "raw": "0.931972789",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.106462,
     "max": 0.106462,
     "quality": "reported",
     "raw": "0.106461571",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/191",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21301A4",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 191,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21301A4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 15:55:42:615 ,Experiment: 5,Test Point: 21301A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301A4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21301A4_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 15:55:42:615 ,Experiment: 5,Test Point: 21301A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301A4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2734.95,
     "max": 2734.95,
     "quality": "reported",
     "raw": "2734.953406",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "C3H8",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.6,
     "max": 1.6,
     "quality": "reported",
     "raw": "1.6",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2 (init)"
    },
    "pressure_kpa": {
     "min": 94.4321,
     "max": 94.4321,
     "quality": "reported",
     "raw": "0.931972789",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.106462,
     "max": 0.106462,
     "quality": "reported",
     "raw": "0.106461571",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/192",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21301A5",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 192,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21301A5_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 16:20:25:949 ,Experiment: 5,Test Point: 21301A5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301A5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21301A5_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 16:20:25:949 ,Experiment: 5,Test Point: 21301A5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301A5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2734.95,
     "max": 2734.95,
     "quality": "reported",
     "raw": "2734.953406",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "C3H8",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.1,
     "max": 1.1,
     "quality": "reported",
     "raw": "1.1",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2 (init)"
    },
    "pressure_kpa": {
     "min": 94.4321,
     "max": 94.4321,
     "quality": "reported",
     "raw": "0.931972789",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.106462,
     "max": 0.106462,
     "quality": "reported",
     "raw": "0.106461571",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/193",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21301A6",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 193,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21301A6_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 17:13:05:125 ,Experiment: 5,Test Point: 21301A6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301A6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21301A6_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 17:13:05:125 ,Experiment: 5,Test Point: 21301A6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301A6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2734.95,
     "max": 2734.95,
     "quality": "reported",
     "raw": "2734.953406",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "C3H8",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.05,
     "max": 1.05,
     "quality": "reported",
     "raw": "1.05",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2 (init)"
    },
    "pressure_kpa": {
     "min": 94.4321,
     "max": 94.4321,
     "quality": "reported",
     "raw": "0.931972789",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.106462,
     "max": 0.106462,
     "quality": "reported",
     "raw": "0.106461571",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/194",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21301C1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 194,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21301C1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 17:35:48:957 ,Experiment: 5,Test Point: 21301C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21301C1_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 17:35:48:957 ,Experiment: 5,Test Point: 21301C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2607.18,
     "max": 2607.18,
     "quality": "reported",
     "raw": "2607.182737",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "C3H8",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.05,
     "max": 1.05,
     "quality": "reported",
     "raw": "1.05",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2 (init)"
    },
    "pressure_kpa": {
     "min": 94.4321,
     "max": 94.4321,
     "quality": "reported",
     "raw": "0.931972789",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.257183,
     "max": 0.257183,
     "quality": "reported",
     "raw": "0.257182771",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/195",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21301C2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 195,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21301C2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 18:00:06:505 ,Experiment: 5,Test Point: 21301C2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301C2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21301C2_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 18:00:06:505 ,Experiment: 5,Test Point: 21301C2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301C2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2607.18,
     "max": 2607.18,
     "quality": "reported",
     "raw": "2607.182737",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "C3H8",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.05,
     "max": 1.05,
     "quality": "reported",
     "raw": "1.05",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2 (init)"
    },
    "pressure_kpa": {
     "min": 94.4321,
     "max": 94.4321,
     "quality": "reported",
     "raw": "0.931972789",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.257183,
     "max": 0.257183,
     "quality": "reported",
     "raw": "0.257182771",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/196",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21301D1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 196,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21301D1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 18:22:44:950 ,Experiment: 5,Test Point: 21301D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301D1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21301D1_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 18:22:44:950 ,Experiment: 5,Test Point: 21301D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301D1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2523.98,
     "max": 2523.98,
     "quality": "reported",
     "raw": "2523.97951",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "C3H8",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.167,
     "max": 0.167,
     "quality": "reported",
     "raw": "0.167",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2 (init)"
    },
    "pressure_kpa": {
     "min": 94.4321,
     "max": 94.4321,
     "quality": "reported",
     "raw": "0.931972789",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.331866,
     "max": 0.331866,
     "quality": "reported",
     "raw": "0.331866302",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/197",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21301D2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 197,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21301D2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 19:19:14:528 ,Experiment: 5,Test Point: 21301D2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301D2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21301D2_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 19:19:14:528 ,Experiment: 5,Test Point: 21301D2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301D2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2523.98,
     "max": 2523.98,
     "quality": "reported",
     "raw": "2523.97951",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "C3H8",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.167,
     "max": 0.167,
     "quality": "reported",
     "raw": "0.167",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2 (init)"
    },
    "pressure_kpa": {
     "min": 94.4321,
     "max": 94.4321,
     "quality": "reported",
     "raw": "0.931972789",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.331866,
     "max": 0.331866,
     "quality": "reported",
     "raw": "0.331866302",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/198",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21301A7",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 198,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21301A7_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 19:30:19:001 ,Experiment: 5,Test Point: 21301A7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301A7_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21301A7_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 19:30:19:001 ,Experiment: 5,Test Point: 21301A7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301A7_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2734.95,
     "max": 2734.95,
     "quality": "reported",
     "raw": "2734.953406",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "C3H8",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.2,
     "max": 1.2,
     "quality": "reported",
     "raw": "1.2",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2 (init)"
    },
    "pressure_kpa": {
     "min": 94.4321,
     "max": 94.4321,
     "quality": "reported",
     "raw": "0.931972789",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.106462,
     "max": 0.106462,
     "quality": "reported",
     "raw": "0.106461571",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/199",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21301A8",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 199,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21301A8_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 19:50:22:472 ,Experiment: 5,Test Point: 21301A8,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301A8_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21301A8_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 19:50:22:472 ,Experiment: 5,Test Point: 21301A8,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301A8_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2734.95,
     "max": 2734.95,
     "quality": "reported",
     "raw": "2734.953406",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "C3H8",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.3,
     "max": 1.3,
     "quality": "reported",
     "raw": "1.3",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2 (init)"
    },
    "pressure_kpa": {
     "min": 94.4321,
     "max": 94.4321,
     "quality": "reported",
     "raw": "0.931972789",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.106462,
     "max": 0.106462,
     "quality": "reported",
     "raw": "0.106461571",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/200",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21301A9",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 200,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21301A9_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 20:36:39:940 ,Experiment: 5,Test Point: 21301A9,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301A9_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21301A9_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 20:36:39:940 ,Experiment: 5,Test Point: 21301A9,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301A9_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2734.95,
     "max": 2734.95,
     "quality": "reported",
     "raw": "2734.953406",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "C3H8",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.45,
     "max": 1.45,
     "quality": "reported",
     "raw": "1.45",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2 (init)"
    },
    "pressure_kpa": {
     "min": 94.4321,
     "max": 94.4321,
     "quality": "reported",
     "raw": "0.931972789",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.106462,
     "max": 0.106462,
     "quality": "reported",
     "raw": "0.106461571",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/201",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21301H1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 201,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21301H1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 21:42:55:349 ,Experiment: 5,Test Point: 21301H1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301H1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21301H1_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 21:42:55:349 ,Experiment: 5,Test Point: 21301H1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301H1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2734.95,
     "max": 2734.95,
     "quality": "reported",
     "raw": "2734.953406",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "C3H8",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.4,
     "max": 1.4,
     "quality": "reported",
     "raw": "1.4",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2 (init)"
    },
    "pressure_kpa": {
     "min": 94.4321,
     "max": 94.4321,
     "quality": "reported",
     "raw": "0.931972789",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.106462,
     "max": 0.106462,
     "quality": "reported",
     "raw": "0.106461571",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/202",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21301H2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 202,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21301H2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 22:14:35:192 ,Experiment: 5,Test Point: 21301H2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301H2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21301H2_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 22:14:35:192 ,Experiment: 5,Test Point: 21301H2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301H2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2734.95,
     "max": 2734.95,
     "quality": "reported",
     "raw": "2734.953406",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "C3H8",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.95,
     "max": 0.95,
     "quality": "reported",
     "raw": "0.95",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2 (init)"
    },
    "pressure_kpa": {
     "min": 94.4321,
     "max": 94.4321,
     "quality": "reported",
     "raw": "0.931972789",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.106462,
     "max": 0.106462,
     "quality": "reported",
     "raw": "0.106461571",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/203",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21301H3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 203,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21301H3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 22:36:08:408 ,Experiment: 5,Test Point: 21301H3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301H3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21301H3_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-28 301 22:36:08:408 ,Experiment: 5,Test Point: 21301H3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301H3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2734.95,
     "max": 2734.95,
     "quality": "reported",
     "raw": "2734.953406",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "C3H8",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.05,
     "max": 1.05,
     "quality": "reported",
     "raw": "1.05",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2 (init)"
    },
    "pressure_kpa": {
     "min": 94.4321,
     "max": 94.4321,
     "quality": "reported",
     "raw": "0.931972789",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.106462,
     "max": 0.106462,
     "quality": "reported",
     "raw": "0.106461571",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/204",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21301J1",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 204,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "adiabatic_flame_temp_k": {
     "min": 2357.79,
     "max": 2357.79,
     "quality": "reported",
     "raw": "2357.78851",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "C3H8",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.55,
     "max": 0.55,
     "quality": "reported",
     "raw": "0.55",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.1,
     "max": 0.1,
     "quality": "reported",
     "raw": "0.1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2 (init)"
    },
    "pressure_kpa": {
     "min": 94.4321,
     "max": 94.4321,
     "quality": "reported",
     "raw": "0.931972789",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.444564,
     "max": 0.444564,
     "quality": "reported",
     "raw": "0.444563692",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/205",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21301J2",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 205,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "adiabatic_flame_temp_k": {
     "min": 2398.67,
     "max": 2398.67,
     "quality": "reported",
     "raw": "2398.666876",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "C3H8",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.6,
     "max": 0.6,
     "quality": "reported",
     "raw": "0.6",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.111,
     "max": 0.111,
     "quality": "reported",
     "raw": "0.111",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2 (init)"
    },
    "pressure_kpa": {
     "min": 94.4321,
     "max": 94.4321,
     "quality": "reported",
     "raw": "0.931972789",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.420416,
     "max": 0.420416,
     "quality": "reported",
     "raw": "0.420415848",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/206",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21301J3",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 206,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21301J3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-29 302 00:08:45:274 ,Experiment: 5,Test Point: 21301J3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301J3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21301J3_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-29 302 00:08:45:274 ,Experiment: 5,Test Point: 21301J3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301J3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2440.4,
     "max": 2440.4,
     "quality": "reported",
     "raw": "2440.404887",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "C3H8",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.65,
     "max": 0.65,
     "quality": "reported",
     "raw": "0.65",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.125,
     "max": 0.125,
     "quality": "reported",
     "raw": "0.125",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2 (init)"
    },
    "pressure_kpa": {
     "min": 94.4321,
     "max": 94.4321,
     "quality": "reported",
     "raw": "0.931972789",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.393572,
     "max": 0.393572,
     "quality": "reported",
     "raw": "0.393571748",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-10/fd-normal/207",
   "accession": "PSI-10",
   "investigation": "Flame Design",
   "type": "test",
   "label": "21301J4",
   "source_table": "PSI-10_Experimental table_Flame Design_Normal Flame.csv",
   "source_row": 207,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-10",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-10_Raw Data_21301J4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-29 302 00:41:40:936 ,Experiment: 5,Test Point: 21301J4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301J4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-10_Raw Data_21301J4_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-29 302 00:41:40:936 ,Experiment: 5,Test Point: 21301J4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-10_Raw Data_21301J4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2357.79,
     "max": 2357.79,
     "quality": "reported",
     "raw": "2357.78851",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "C3H8",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.65,
     "max": 0.65,
     "quality": "reported",
     "raw": "0.65",
     "column": "mfuel (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.1,
     "max": 0.1,
     "quality": "reported",
     "raw": "0.1",
     "column": "Xfuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "spherical diffusion flames",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2 (init)"
    },
    "pressure_kpa": {
     "min": 94.4321,
     "max": 94.4321,
     "quality": "reported",
     "raw": "0.931972789",
     "column": "pinit (atm)"
    },
    "stoich_mixture_fraction": {
     "min": 0.444564,
     "max": 0.444564,
     "quality": "reported",
     "raw": "0.444563692",
     "column": "mean Zst"
    }
   }
  },
  {
   "id": "PSI-100/saffire3/1",
   "accession": "PSI-100",
   "investigation": "Saffire-III",
   "type": "test",
   "label": "Sample S1",
   "source_table": "PSI-100_Experimental table_SAFFIRE-3.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-100",
   "values": {
    "burn_length_cm": {
     "min": 84,
     "max": 84,
     "quality": "reported",
     "raw": "~ 84 cm",
     "column": "p. 31, Table 1 (continued), row 3-1, column µ-g Burn Length",
     "note": "From NASA's file NTRS-20180005168.pdf, p. 31, Table 1 (continued), row 3-1, column µ-g Burn Length. NASA's column \"µ-g Burn Length\" of Table 1. NASA writes \"~\" (about).",
     "evidence": "3-1 182 W 8 s 300 s ~ 84 cm 2.3 mm/s Complete Acceleratory",
     "evidence_source": "file:NTRS-20180005168.pdf"
    },
    "burn_time_s": {
     "min": 300,
     "max": 300,
     "quality": "reported",
     "raw": "300 s",
     "column": "p. 31, Table 1 (continued), row 3-1, column Burn Duration",
     "note": "From NASA's file NTRS-20180005168.pdf, p. 31, Table 1 (continued), row 3-1, column Burn Duration. NASA's column \"Burn Duration\" of Table 1.",
     "evidence": "3-1 182 W 8 s 300 s ~ 84 cm 2.3 mm/s Complete Acceleratory",
     "evidence_source": "file:NTRS-20180005168.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "Direction"
    },
    "flow_speed_cm_s": {
     "min": 30,
     "max": 30,
     "quality": "reported",
     "raw": "30 cm/s",
     "column": "Air Flow"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "SIBAL Fabric",
     "column": "Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "also used SIBAL as the sample material",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "SIBAL Fabric",
     "column": "Material"
    },
    "igniter_power_w": {
     "min": 182,
     "max": 182,
     "quality": "reported",
     "raw": "182 W",
     "column": "p. 31, Table 1 (continued), row 3-1, column Ignition Power",
     "note": "From NASA's file NTRS-20180005168.pdf, p. 31, Table 1 (continued), row 3-1, column Ignition Power. NASA's column \"Ignition Power\" of Table 1.",
     "evidence": "3-1 182 W 8 s 300 s ~ 84 cm 2.3 mm/s Complete Acceleratory",
     "evidence_source": "file:NTRS-20180005168.pdf"
    },
    "ignition_time_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8 s",
     "column": "p. 31, Table 1 (continued), row 3-1, column Ignition Time",
     "note": "From NASA's file NTRS-20180005168.pdf, p. 31, Table 1 (continued), row 3-1, column Ignition Time. NASA's column \"Ignition Time\" of Table 1.",
     "evidence": "3-1 182 W 8 s 300 s ~ 84 cm 2.3 mm/s Complete Acceleratory",
     "evidence_source": "file:NTRS-20180005168.pdf"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.212,
     "quality": "reported",
     "raw": "21.2 to 21.0",
     "column": "p. 30, Table 1, row III-1, column Δ %O2",
     "note": "From NASA's file NTRS-20180005168.pdf, p. 30, Table 1, row III-1, column Δ %O2. NASA's column \"Δ %O2\" of Table 1. The column is headed \"Δ %O2\" with footnote i; the values are the oxygen percentage (start to end of the burn where two are given), converted to a fraction.",
     "evidence": "III-1 Cotton-Fiberglass 40.6 cm 0.37 mm 94 cm 25 cm/s Concurrent 21.2 to 21.0",
     "evidence_source": "file:NTRS-20180005168.pdf"
    },
    "pressure_kpa": {
     "min": 99.418353,
     "max": 99.418353,
     "quality": "reported",
     "raw": "14.4194130153798",
     "column": "Calibrated Data!J3",
     "note": "From NASA's file PSI-100_Raw Data_Saffire III Sample 1 Sensors.xlsx, Calibrated Data!J3. The first reading of NASA's Ambient Pressure (PSIA) in this sample's sensor record, 60 s before the igniter current first passed 0.5 A; multiplied by 6.894757293168 to give kPa. A reading at the start of the record, not an average over the burn; the pressure curve in series.csv shows the whole record."
    },
    "sample_length_cm": {
     "min": 94,
     "max": 94,
     "quality": "reported",
     "raw": "94 cm",
     "column": "Sample Length"
    },
    "sample_thickness_mm": {
     "min": 3.3,
     "max": 3.3,
     "quality": "reported",
     "raw": ".33 cm",
     "column": "Sample Thickness"
    },
    "sample_width_cm": {
     "min": 40.6,
     "max": 40.6,
     "quality": "reported",
     "raw": "40.6 cm",
     "column": "Sample Width"
    },
    "spread_rate_mm_s": {
     "min": 2.3,
     "max": 2.3,
     "quality": "reported",
     "raw": "2.3 mm/s",
     "column": "p. 31, Table 1 (continued), row 3-1, column µ-g Spread Rate",
     "note": "From NASA's file NTRS-20180005168.pdf, p. 31, Table 1 (continued), row 3-1, column µ-g Spread Rate. NASA's column \"µ-g Spread Rate\" of Table 1.",
     "evidence": "3-1 182 W 8 s 300 s ~ 84 cm 2.3 mm/s Complete Acceleratory",
     "evidence_source": "file:NTRS-20180005168.pdf"
    }
   }
  },
  {
   "id": "PSI-100/saffire3/2",
   "accession": "PSI-100",
   "investigation": "Saffire-III",
   "type": "test",
   "label": "Sample S2",
   "source_table": "PSI-100_Experimental table_SAFFIRE-3.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-100",
   "values": {
    "burn_length_1g_cm": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "~ 0",
     "column": "p. 31, Table 1 (continued), row 3-2, column 1-g Burn Length",
     "note": "From NASA's file NTRS-20180005168.pdf, p. 31, Table 1 (continued), row 3-2, column 1-g Burn Length. NASA's column \"1-g Burn Length\" of Table 1. NASA writes \"~\" (about).",
     "evidence": "3-2 182 W 8 s 60 s ~ 10 cm 0.98 mm/s ~ 0 n/a",
     "evidence_source": "file:NTRS-20180005168.pdf"
    },
    "burn_length_cm": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "~ 10 cm",
     "column": "p. 31, Table 1 (continued), row 3-2, column µ-g Burn Length",
     "note": "From NASA's file NTRS-20180005168.pdf, p. 31, Table 1 (continued), row 3-2, column µ-g Burn Length. NASA's column \"µ-g Burn Length\" of Table 1. NASA writes \"~\" (about).",
     "evidence": "3-2 182 W 8 s 60 s ~ 10 cm 0.98 mm/s ~ 0 n/a",
     "evidence_source": "file:NTRS-20180005168.pdf"
    },
    "burn_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60 s",
     "column": "p. 31, Table 1 (continued), row 3-2, column Burn Duration",
     "note": "From NASA's file NTRS-20180005168.pdf, p. 31, Table 1 (continued), row 3-2, column Burn Duration. NASA's column \"Burn Duration\" of Table 1.",
     "evidence": "3-2 182 W 8 s 60 s ~ 10 cm 0.98 mm/s ~ 0 n/a",
     "evidence_source": "file:NTRS-20180005168.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "Direction"
    },
    "flow_speed_cm_s": {
     "min": 30,
     "max": 30,
     "quality": "reported",
     "raw": "30 cm/s",
     "column": "Air Flow"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "SIBAL Fabric",
     "column": "Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "also used SIBAL as the sample material",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "SIBAL Fabric",
     "column": "Material"
    },
    "igniter_power_w": {
     "min": 182,
     "max": 182,
     "quality": "reported",
     "raw": "182 W",
     "column": "p. 31, Table 1 (continued), row 3-2, column Ignition Power",
     "note": "From NASA's file NTRS-20180005168.pdf, p. 31, Table 1 (continued), row 3-2, column Ignition Power. NASA's column \"Ignition Power\" of Table 1.",
     "evidence": "3-2 182 W 8 s 60 s ~ 10 cm 0.98 mm/s ~ 0 n/a",
     "evidence_source": "file:NTRS-20180005168.pdf"
    },
    "ignition_time_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8 s",
     "column": "p. 31, Table 1 (continued), row 3-2, column Ignition Time",
     "note": "From NASA's file NTRS-20180005168.pdf, p. 31, Table 1 (continued), row 3-2, column Ignition Time. NASA's column \"Ignition Time\" of Table 1.",
     "evidence": "3-2 182 W 8 s 60 s ~ 10 cm 0.98 mm/s ~ 0 n/a",
     "evidence_source": "file:NTRS-20180005168.pdf"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.212,
     "quality": "reported",
     "raw": "21.2 to 21.0",
     "column": "p. 30, Table 1, row III-2, column Δ %O2",
     "note": "From NASA's file NTRS-20180005168.pdf, p. 30, Table 1, row III-2, column Δ %O2. NASA's column \"Δ %O2\" of Table 1. The column is headed \"Δ %O2\" with footnote i; the values are the oxygen percentage (start to end of the burn where two are given), converted to a fraction.",
     "evidence": "III-2 Cotton-Fiberglass 40.6 cm 0.37 mm ~ 10 cm 25 cm/s Opposed 21.2 to 21.0",
     "evidence_source": "file:NTRS-20180005168.pdf"
    },
    "pressure_kpa": {
     "min": 99.405479,
     "max": 99.405479,
     "quality": "reported",
     "raw": "14.41754573365472",
     "column": "Calibrated Data!J3",
     "note": "From NASA's file PSI-100_Raw Data_Saffire III Sample 2 Sensors.xlsx, Calibrated Data!J3. The first reading of NASA's Ambient Pressure (PSIA) in this sample's sensor record, 60 s before the igniter current first passed 0.5 A; multiplied by 6.894757293168 to give kPa. A reading at the start of the record, not an average over the burn; the pressure curve in series.csv shows the whole record."
    },
    "sample_length_cm": {
     "min": 94,
     "max": 94,
     "quality": "reported",
     "raw": "94 cm",
     "column": "Sample Length"
    },
    "sample_thickness_mm": {
     "min": 3.3,
     "max": 3.3,
     "quality": "reported",
     "raw": ".33 cm",
     "column": "Sample Thickness"
    },
    "sample_width_cm": {
     "min": 40.6,
     "max": 40.6,
     "quality": "reported",
     "raw": "40.6 cm",
     "column": "Sample Width"
    },
    "spread_rate_mm_s": {
     "min": 0.98,
     "max": 0.98,
     "quality": "reported",
     "raw": "0.98 mm/s",
     "column": "p. 31, Table 1 (continued), row 3-2, column µ-g Spread Rate",
     "note": "From NASA's file NTRS-20180005168.pdf, p. 31, Table 1 (continued), row 3-2, column µ-g Spread Rate. NASA's column \"µ-g Spread Rate\" of Table 1.",
     "evidence": "3-2 182 W 8 s 60 s ~ 10 cm 0.98 mm/s ~ 0 n/a",
     "evidence_source": "file:NTRS-20180005168.pdf"
    }
   }
  },
  {
   "id": "PSI-101/samer/1",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 51",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 38,
     "max": 38,
     "quality": "reported",
     "raw": "38",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "B.L. new formula",
     "quality": "reported",
     "raw": "B.L. new formula",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.38,
     "max": 1.38,
     "quality": "reported",
     "raw": "1.38",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.056373,
     "max": 0.056373,
     "quality": "reported",
     "raw": "='SAME R Results'!BI6",
     "column": "Material Sort 02122013!BR29",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR29. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.097108,
     "max": 0.097108,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ6",
     "column": "Material Sort 02122013!BS29",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS29. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/2",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 51a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 261,
     "max": 261,
     "quality": "reported",
     "raw": "261",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "B.L. new formula",
     "quality": "reported",
     "raw": "B.L. new formula",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.38,
     "max": 1.38,
     "quality": "reported",
     "raw": "1.38",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.066816,
     "max": 0.066816,
     "quality": "reported",
     "raw": "='SAME R Results'!BI7",
     "column": "Material Sort 02122013!BR49",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR49. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.1155,
     "max": 0.1155,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ7",
     "column": "Material Sort 02122013!BS49",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS49. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/3",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 61",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 3,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 38,
     "max": 38,
     "quality": "reported",
     "raw": "38",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Baseline Aging",
     "quality": "reported",
     "raw": "Baseline Aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.38,
     "max": 1.38,
     "quality": "reported",
     "raw": "1.38",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.058582,
     "max": 0.058582,
     "quality": "reported",
     "raw": "='SAME R Results'!BI23",
     "column": "Material Sort 02122013!BR30",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR30. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.105916,
     "max": 0.105916,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ23",
     "column": "Material Sort 02122013!BS30",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS30. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/4",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 61a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 4,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 807,
     "max": 807,
     "quality": "reported",
     "raw": "807",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.38,
     "max": 1.38,
     "quality": "reported",
     "raw": "1.38",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.10875,
     "max": 0.10875,
     "quality": "reported",
     "raw": "='SAME R Results'!BI24",
     "column": "Material Sort 02122013!BR50",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR50. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.161132,
     "max": 0.161132,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ24",
     "column": "Material Sort 02122013!BS50",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS50. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/5",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 62",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 5,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 39,
     "max": 39,
     "quality": "reported",
     "raw": "39",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "High Temp aging",
     "quality": "reported",
     "raw": "High Temp aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.48,
     "max": 1.48,
     "quality": "reported",
     "raw": "1.48",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.148336,
     "max": 0.148336,
     "quality": "reported",
     "raw": "='SAME R Results'!BI25",
     "column": "Material Sort 02122013!BR31",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR31. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.251167,
     "max": 0.251167,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ25",
     "column": "Material Sort 02122013!BS31",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS31. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/6",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 62a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 6,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 808,
     "max": 808,
     "quality": "reported",
     "raw": "808",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.48,
     "max": 1.48,
     "quality": "reported",
     "raw": "1.48",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.243112,
     "max": 0.243112,
     "quality": "reported",
     "raw": "='SAME R Results'!BI26",
     "column": "Material Sort 02122013!BR51",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR51. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.382918,
     "max": 0.382918,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ26",
     "column": "Material Sort 02122013!BS51",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS51. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/7",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 70",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 7,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 747,
     "max": 747,
     "quality": "reported",
     "raw": "747",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "High temp aged STS det",
     "quality": "reported",
     "raw": "High temp aged STS det",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.48,
     "max": 1.48,
     "quality": "reported",
     "raw": "1.48",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.161006,
     "max": 0.161006,
     "quality": "reported",
     "raw": "='SAME R Results'!BI39",
     "column": "Material Sort 02122013!BR32",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR32. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.208109,
     "max": 0.208109,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ39",
     "column": "Material Sort 02122013!BS32",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS32. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/8",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 73",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 8,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 33,
     "max": 33,
     "quality": "reported",
     "raw": "33",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Baseline Aging",
     "quality": "reported",
     "raw": "Baseline Aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.38,
     "max": 1.38,
     "quality": "reported",
     "raw": "1.38",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.058782,
     "max": 0.058782,
     "quality": "reported",
     "raw": "='SAME R Results'!BI43",
     "column": "Material Sort 02122013!BR33",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR33. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.08874,
     "max": 0.08874,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ43",
     "column": "Material Sort 02122013!BS33",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS33. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/9",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 73a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 9,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 560,
     "max": 560,
     "quality": "reported",
     "raw": "560",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.38,
     "max": 1.38,
     "quality": "reported",
     "raw": "1.38",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.095518,
     "max": 0.095518,
     "quality": "reported",
     "raw": "='SAME R Results'!BI44",
     "column": "Material Sort 02122013!BR52",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR52. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.124197,
     "max": 0.124197,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ44",
     "column": "Material Sort 02122013!BS52",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS52. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/10",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 75",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 10,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 32,
     "max": 32,
     "quality": "reported",
     "raw": "32",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Mid Temp aging (no Ptrak)",
     "quality": "reported",
     "raw": "Mid Temp aging (no Ptrak)",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.43,
     "max": 1.43,
     "quality": "reported",
     "raw": "1.43",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    }
   }
  },
  {
   "id": "PSI-101/samer/11",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 75a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 11,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 563,
     "max": 563,
     "quality": "reported",
     "raw": "563",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.43,
     "max": 1.43,
     "quality": "reported",
     "raw": "1.43",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.117977,
     "max": 0.117977,
     "quality": "reported",
     "raw": "='SAME R Results'!BI48",
     "column": "Material Sort 02122013!BR53",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR53. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.15228,
     "max": 0.15228,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ48",
     "column": "Material Sort 02122013!BS53",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS53. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/12",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 77",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 12,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 31,
     "max": 31,
     "quality": "reported",
     "raw": "31",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "High Temp aging",
     "quality": "reported",
     "raw": "High Temp aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.48,
     "max": 1.48,
     "quality": "reported",
     "raw": "1.48",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.088397,
     "max": 0.088397,
     "quality": "reported",
     "raw": "='SAME R Results'!BI51",
     "column": "Material Sort 02122013!BR35",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR35. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.106565,
     "max": 0.106565,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ51",
     "column": "Material Sort 02122013!BS35",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS35. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/13",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 77a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 13,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 559,
     "max": 559,
     "quality": "reported",
     "raw": "559",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.48,
     "max": 1.48,
     "quality": "reported",
     "raw": "1.48",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.138181,
     "max": 0.138181,
     "quality": "reported",
     "raw": "='SAME R Results'!BI52",
     "column": "Material Sort 02122013!BR54",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR54. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.16532,
     "max": 0.16532,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ52",
     "column": "Material Sort 02122013!BS54",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS54. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/14",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 85",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 14,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 33,
     "max": 33,
     "quality": "reported",
     "raw": "33",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Mid Temp aging run. Repeat 75",
     "quality": "reported",
     "raw": "Mid Temp aging run. Repeat 75",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.43,
     "max": 1.43,
     "quality": "reported",
     "raw": "1.43",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    }
   }
  },
  {
   "id": "PSI-101/samer/15",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 85a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 15,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 563,
     "max": 563,
     "quality": "reported",
     "raw": "563",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.43,
     "max": 1.43,
     "quality": "reported",
     "raw": "1.43",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.112199,
     "max": 0.112199,
     "quality": "reported",
     "raw": "='SAME R Results'!BI70",
     "column": "Material Sort 02122013!BR55",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR55. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.173566,
     "max": 0.173566,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ70",
     "column": "Material Sort 02122013!BS55",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS55. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/16",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 90",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 16,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 38,
     "max": 38,
     "quality": "reported",
     "raw": "38",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Mid Temp aging reburn 85",
     "quality": "reported",
     "raw": "Mid Temp aging reburn 85",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.43,
     "max": 1.43,
     "quality": "reported",
     "raw": "1.43",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.066291,
     "max": 0.066291,
     "quality": "reported",
     "raw": "='SAME R Results'!BI76",
     "column": "Material Sort 02122013!BR37",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR37. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.030455,
     "max": 0.030455,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ76",
     "column": "Material Sort 02122013!BS37",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS37. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/17",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 90a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 17,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 569,
     "max": 569,
     "quality": "reported",
     "raw": "569",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.43,
     "max": 1.43,
     "quality": "reported",
     "raw": "1.43",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.082953,
     "max": 0.082953,
     "quality": "reported",
     "raw": "='SAME R Results'!BI77",
     "column": "Material Sort 02122013!BR56",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR56. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.044325,
     "max": 0.044325,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ77",
     "column": "Material Sort 02122013!BS56",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS56. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/18",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 92",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 18,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 35,
     "max": 35,
     "quality": "reported",
     "raw": "35",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Baseline STS det",
     "quality": "reported",
     "raw": "Baseline STS det",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.38,
     "max": 1.38,
     "quality": "reported",
     "raw": "1.38",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.049005,
     "max": 0.049005,
     "quality": "reported",
     "raw": "='SAME R Results'!BI80",
     "column": "Material Sort 02122013!BR38",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR38. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.110717,
     "max": 0.110717,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ80",
     "column": "Material Sort 02122013!BS38",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS38. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/19",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 93",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 19,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 36,
     "max": 36,
     "quality": "reported",
     "raw": "36",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Mid Temp aging run 75 repeat",
     "quality": "reported",
     "raw": "Mid Temp aging run 75 repeat",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.43,
     "max": 1.43,
     "quality": "reported",
     "raw": "1.43",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.064342,
     "max": 0.064342,
     "quality": "reported",
     "raw": "='SAME R Results'!BI81",
     "column": "Material Sort 02122013!BR39",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR39. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.09963,
     "max": 0.09963,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ81",
     "column": "Material Sort 02122013!BS39",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS39. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/20",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 93a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 20,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 568,
     "max": 568,
     "quality": "reported",
     "raw": "568",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.43,
     "max": 1.43,
     "quality": "reported",
     "raw": "1.43",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.105092,
     "max": 0.105092,
     "quality": "reported",
     "raw": "='SAME R Results'!BI82",
     "column": "Material Sort 02122013!BR57",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR57. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.154845,
     "max": 0.154845,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ82",
     "column": "Material Sort 02122013!BS57",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS57. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/21",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 94",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 21,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 42,
     "max": 42,
     "quality": "reported",
     "raw": "42",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Mid Temp aging run mid high",
     "quality": "reported",
     "raw": "Mid Temp aging run mid high",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.45,
     "max": 1.45,
     "quality": "reported",
     "raw": "1.45",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.09194,
     "max": 0.09194,
     "quality": "reported",
     "raw": "='SAME R Results'!BI83",
     "column": "Material Sort 02122013!BR40",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR40. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.116467,
     "max": 0.116467,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ83",
     "column": "Material Sort 02122013!BS40",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS40. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/22",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 94a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 22,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 567,
     "max": 567,
     "quality": "reported",
     "raw": "567",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.45,
     "max": 1.45,
     "quality": "reported",
     "raw": "1.45",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.135502,
     "max": 0.135502,
     "quality": "reported",
     "raw": "='SAME R Results'!BI84",
     "column": "Material Sort 02122013!BR58",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR58. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.176143,
     "max": 0.176143,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ84",
     "column": "Material Sort 02122013!BS58",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS58. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/23",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 101",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 23,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 29,
     "max": 29,
     "quality": "reported",
     "raw": "29",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "No flow run w/ aging",
     "quality": "reported",
     "raw": "No flow run w/ aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.48,
     "max": 1.48,
     "quality": "reported",
     "raw": "1.48",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.223327,
     "max": 0.223327,
     "quality": "reported",
     "raw": "='SAME R Results'!BI99",
     "column": "Material Sort 02122013!BR41",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR41. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.34551,
     "max": 0.34551,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ99",
     "column": "Material Sort 02122013!BS41",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS41. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/24",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 101a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 24,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 561,
     "max": 561,
     "quality": "reported",
     "raw": "561",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.48,
     "max": 1.48,
     "quality": "reported",
     "raw": "1.48",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.233681,
     "max": 0.233681,
     "quality": "reported",
     "raw": "='SAME R Results'!BI100",
     "column": "Material Sort 02122013!BR46",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR46. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.351237,
     "max": 0.351237,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ100",
     "column": "Material Sort 02122013!BS46",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS46. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/25",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 102",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 25,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 28,
     "max": 28,
     "quality": "reported",
     "raw": "28",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "No flow run w/ aging",
     "quality": "reported",
     "raw": "No flow run w/ aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.48,
     "max": 1.48,
     "quality": "reported",
     "raw": "1.48",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 120,
     "max": 120,
     "quality": "reported",
     "raw": "120",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.30422,
     "max": 0.30422,
     "quality": "reported",
     "raw": "='SAME R Results'!BI101",
     "column": "Material Sort 02122013!BR42",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR42. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.448126,
     "max": 0.448126,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ101",
     "column": "Material Sort 02122013!BS42",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS42. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/26",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 102a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 26,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 563,
     "max": 563,
     "quality": "reported",
     "raw": "563",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.48,
     "max": 1.48,
     "quality": "reported",
     "raw": "1.48",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.329647,
     "max": 0.329647,
     "quality": "reported",
     "raw": "='SAME R Results'!BI102",
     "column": "Material Sort 02122013!BR47",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR47. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.460047,
     "max": 0.460047,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ102",
     "column": "Material Sort 02122013!BS47",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS47. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/27",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 108",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 27,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 30,
     "max": 30,
     "quality": "reported",
     "raw": "30",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Low flow run w/aging",
     "quality": "reported",
     "raw": "Low flow run w/aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.48,
     "max": 1.48,
     "quality": "reported",
     "raw": "1.48",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.134671,
     "max": 0.134671,
     "quality": "reported",
     "raw": "='SAME R Results'!BI114",
     "column": "Material Sort 02122013!BR43",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR43. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.343486,
     "max": 0.343486,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ114",
     "column": "Material Sort 02122013!BS43",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS43. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/28",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 108a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 28,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 560,
     "max": 560,
     "quality": "reported",
     "raw": "560",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.48,
     "max": 1.48,
     "quality": "reported",
     "raw": "1.48",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.144996,
     "max": 0.144996,
     "quality": "reported",
     "raw": "='SAME R Results'!BI115",
     "column": "Material Sort 02122013!BR48",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR48. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.351073,
     "max": 0.351073,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ115",
     "column": "Material Sort 02122013!BS48",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS48. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/29",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 114",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 29,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 28,
     "max": 28,
     "quality": "reported",
     "raw": "28",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "low flow run w STS no Ptrak",
     "quality": "reported",
     "raw": "low flow run w STS no Ptrak",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.43,
     "max": 1.43,
     "quality": "reported",
     "raw": "1.43",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    }
   }
  },
  {
   "id": "PSI-101/samer/30",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 48",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 30,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 62,
     "max": 62,
     "quality": "reported",
     "raw": "62",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Low Temp",
     "quality": "reported",
     "raw": "Low Temp",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.304,
     "max": 1.304,
     "quality": "reported",
     "raw": "1.304",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.24387,
     "max": 0.24387,
     "quality": "reported",
     "raw": "='SAME R Results'!BI3",
     "column": "Material Sort 02122013!BR112",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR112. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.450155,
     "max": 0.450155,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ3",
     "column": "Material Sort 02122013!BS112",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS112. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/31",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 53",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 31,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 52,
     "max": 52,
     "quality": "reported",
     "raw": "52",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "HighTemp",
     "quality": "reported",
     "raw": "HighTemp",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.35,
     "max": 1.35,
     "quality": "reported",
     "raw": "1.35",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.250339,
     "max": 0.250339,
     "quality": "reported",
     "raw": "='SAME R Results'!BI9",
     "column": "Material Sort 02122013!BR113",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR113. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.54742,
     "max": 0.54742,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ9",
     "column": "Material Sort 02122013!BS113",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS113. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/32",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 59",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 32,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 24,
     "max": 24,
     "quality": "reported",
     "raw": "24",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "baseline aged",
     "quality": "reported",
     "raw": "baseline aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.327,
     "max": 1.327,
     "quality": "reported",
     "raw": "1.327",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.192255,
     "max": 0.192255,
     "quality": "reported",
     "raw": "='SAME R Results'!BI18",
     "column": "Material Sort 02122013!BR114",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR114. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.455132,
     "max": 0.455132,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ18",
     "column": "Material Sort 02122013!BS114",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS114. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/33",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 59a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 33,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 856,
     "max": 856,
     "quality": "reported",
     "raw": "856",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.327,
     "max": 1.327,
     "quality": "reported",
     "raw": "1.327",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.338075,
     "max": 0.338075,
     "quality": "reported",
     "raw": "='SAME R Results'!BI19",
     "column": "Material Sort 02122013!BR128",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR128. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.614709,
     "max": 0.614709,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ19",
     "column": "Material Sort 02122013!BS128",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS128. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/34",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 60",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 34,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 49,
     "max": 49,
     "quality": "reported",
     "raw": "49",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Htemp ageing",
     "quality": "reported",
     "raw": "Htemp ageing",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.35,
     "max": 1.35,
     "quality": "reported",
     "raw": "1.35",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.240641,
     "max": 0.240641,
     "quality": "reported",
     "raw": "='SAME R Results'!BI20",
     "column": "Material Sort 02122013!BR115",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR115. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.533137,
     "max": 0.533137,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ20",
     "column": "Material Sort 02122013!BS115",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS115. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/35",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 60a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 35,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 856,
     "max": 856,
     "quality": "reported",
     "raw": "856",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.35,
     "max": 1.35,
     "quality": "reported",
     "raw": "1.35",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.467686,
     "max": 0.467686,
     "quality": "reported",
     "raw": "='SAME R Results'!BI21",
     "column": "Material Sort 02122013!BR129",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR129. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.748473,
     "max": 0.748473,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ21",
     "column": "Material Sort 02122013!BS129",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS129. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/36",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 65",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 36,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 50,
     "max": 50,
     "quality": "reported",
     "raw": "50",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Baseline long aging",
     "quality": "reported",
     "raw": "Baseline long aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.327,
     "max": 1.327,
     "quality": "reported",
     "raw": "1.327",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.195139,
     "max": 0.195139,
     "quality": "reported",
     "raw": "='SAME R Results'!BI31",
     "column": "Material Sort 02122013!BR116",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR116. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.461857,
     "max": 0.461857,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ31",
     "column": "Material Sort 02122013!BS116",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS116. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/37",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 65a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 37,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 1923,
     "max": 1923,
     "quality": "reported",
     "raw": "1923",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.327,
     "max": 1.327,
     "quality": "reported",
     "raw": "1.327",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.462103,
     "max": 0.462103,
     "quality": "reported",
     "raw": "='SAME R Results'!BI32",
     "column": "Material Sort 02122013!BR130",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR130. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.705557,
     "max": 0.705557,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ32",
     "column": "Material Sort 02122013!BS130",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS130. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/38",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 66",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 38,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 42,
     "max": 42,
     "quality": "reported",
     "raw": "42",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "High T aging",
     "quality": "reported",
     "raw": "High T aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.36,
     "max": 1.36,
     "quality": "reported",
     "raw": "1.36",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.24249,
     "max": 0.24249,
     "quality": "reported",
     "raw": "='SAME R Results'!BI33",
     "column": "Material Sort 02122013!BR117",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR117. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.553311,
     "max": 0.553311,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ33",
     "column": "Material Sort 02122013!BS117",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS117. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/39",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 66a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 39,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 837,
     "max": 837,
     "quality": "reported",
     "raw": "837",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.36,
     "max": 1.36,
     "quality": "reported",
     "raw": "1.36",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.454718,
     "max": 0.454718,
     "quality": "reported",
     "raw": "='SAME R Results'!BI34",
     "column": "Material Sort 02122013!BR131",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR131. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.764564,
     "max": 0.764564,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ34",
     "column": "Material Sort 02122013!BS131",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS131. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/40",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 67",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 40,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 751,
     "max": 751,
     "quality": "reported",
     "raw": "751",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "High temp aged",
     "quality": "reported",
     "raw": "High temp aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.35,
     "max": 1.35,
     "quality": "reported",
     "raw": "1.35",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.385034,
     "max": 0.385034,
     "quality": "reported",
     "raw": "='SAME R Results'!BI36",
     "column": "Material Sort 02122013!BR118",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR118. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.667898,
     "max": 0.667898,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ36",
     "column": "Material Sort 02122013!BS118",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS118. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/41",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 72",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 41,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 42,
     "max": 42,
     "quality": "reported",
     "raw": "42",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Baseline STS det",
     "quality": "reported",
     "raw": "Baseline STS det",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.327,
     "max": 1.327,
     "quality": "reported",
     "raw": "1.327",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.182273,
     "max": 0.182273,
     "quality": "reported",
     "raw": "='SAME R Results'!BI41",
     "column": "Material Sort 02122013!BR119",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR119. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.419177,
     "max": 0.419177,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ41",
     "column": "Material Sort 02122013!BS119",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS119. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/42",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 86",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 42,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 50,
     "max": 50,
     "quality": "reported",
     "raw": "50",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Mid temp aging",
     "quality": "reported",
     "raw": "Mid temp aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.345,
     "max": 1.345,
     "quality": "reported",
     "raw": "1.345",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.244907,
     "max": 0.244907,
     "quality": "reported",
     "raw": "='SAME R Results'!BI71",
     "column": "Material Sort 02122013!BR120",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR120. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.528535,
     "max": 0.528535,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ71",
     "column": "Material Sort 02122013!BS120",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS120. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/43",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 86a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 43,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 628,
     "max": 628,
     "quality": "reported",
     "raw": "628",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.345,
     "max": 1.345,
     "quality": "reported",
     "raw": "1.345",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.407304,
     "max": 0.407304,
     "quality": "reported",
     "raw": "='SAME R Results'!BI72",
     "column": "Material Sort 02122013!BR132",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR132. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.682512,
     "max": 0.682512,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ72",
     "column": "Material Sort 02122013!BS132",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS132. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/44",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 91",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 44,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 46,
     "max": 46,
     "quality": "reported",
     "raw": "46",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Baseline STS det",
     "quality": "reported",
     "raw": "Baseline STS det",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.327,
     "max": 1.327,
     "quality": "reported",
     "raw": "1.327",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.185988,
     "max": 0.185988,
     "quality": "reported",
     "raw": "='SAME R Results'!BI79",
     "column": "Material Sort 02122013!BR121",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR121. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.470985,
     "max": 0.470985,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ79",
     "column": "Material Sort 02122013!BS121",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS121. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/45",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 99",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 45,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 48,
     "max": 48,
     "quality": "reported",
     "raw": "48",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "No flow run w/aging",
     "quality": "reported",
     "raw": "No flow run w/aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.35,
     "max": 1.35,
     "quality": "reported",
     "raw": "1.35",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.422147,
     "max": 0.422147,
     "quality": "reported",
     "raw": "='SAME R Results'!BI95",
     "column": "Material Sort 02122013!BR122",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR122. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.778236,
     "max": 0.778236,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ95",
     "column": "Material Sort 02122013!BS122",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS122. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/46",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 99a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 46,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 627,
     "max": 627,
     "quality": "reported",
     "raw": "627",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.35,
     "max": 1.35,
     "quality": "reported",
     "raw": "1.35",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.532808,
     "max": 0.532808,
     "quality": "reported",
     "raw": "='SAME R Results'!BI96",
     "column": "Material Sort 02122013!BR133",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR133. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.836247,
     "max": 0.836247,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ96",
     "column": "Material Sort 02122013!BS133",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS133. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/47",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 103",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 47,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 48,
     "max": 48,
     "quality": "reported",
     "raw": "48",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "low flow run w/ aging",
     "quality": "reported",
     "raw": "low flow run w/ aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.35,
     "max": 1.35,
     "quality": "reported",
     "raw": "1.35",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.389605,
     "max": 0.389605,
     "quality": "reported",
     "raw": "='SAME R Results'!BI104",
     "column": "Material Sort 02122013!BR123",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR123. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.889941,
     "max": 0.889941,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ104",
     "column": "Material Sort 02122013!BS123",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS123. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/48",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 103a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 48,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 619,
     "max": 619,
     "quality": "reported",
     "raw": "619",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.35,
     "max": 1.35,
     "quality": "reported",
     "raw": "1.35",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.443408,
     "max": 0.443408,
     "quality": "reported",
     "raw": "='SAME R Results'!BI105",
     "column": "Material Sort 02122013!BR126",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR126. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.876456,
     "max": 0.876456,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ105",
     "column": "Material Sort 02122013!BS126",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS126. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/49",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 104",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 49,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 51,
     "max": 51,
     "quality": "reported",
     "raw": "51",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "No flow run w/ aging",
     "quality": "reported",
     "raw": "No flow run w/ aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.35,
     "max": 1.35,
     "quality": "reported",
     "raw": "1.35",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.939887,
     "max": 0.939887,
     "quality": "reported",
     "raw": "='SAME R Results'!BI106",
     "column": "Material Sort 02122013!BR124",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR124. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 1.21688,
     "max": 1.21688,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ106",
     "column": "Material Sort 02122013!BS124",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS124. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/50",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 104a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 50,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 636,
     "max": 636,
     "quality": "reported",
     "raw": "636",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.35,
     "max": 1.35,
     "quality": "reported",
     "raw": "1.35",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 1.10264,
     "max": 1.10264,
     "quality": "reported",
     "raw": "='SAME R Results'!BI107",
     "column": "Material Sort 02122013!BR127",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR127. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 1.20129,
     "max": 1.20129,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ107",
     "column": "Material Sort 02122013!BS127",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS127. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/51",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 109",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 51,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 28,
     "max": 28,
     "quality": "reported",
     "raw": "28",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "low flow run w STS",
     "quality": "reported",
     "raw": "low flow run w STS",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.35,
     "max": 1.35,
     "quality": "reported",
     "raw": "1.35",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.256981,
     "max": 0.256981,
     "quality": "reported",
     "raw": "='SAME R Results'!BI117",
     "column": "Material Sort 02122013!BR125",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR125. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.543566,
     "max": 0.543566,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ117",
     "column": "Material Sort 02122013!BS125",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS125. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/52",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 49",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 52,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 51,
     "max": 51,
     "quality": "reported",
     "raw": "51",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "B.L. High RT/R0",
     "quality": "reported",
     "raw": "B.L. High RT/R0",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Lamp wick",
     "quality": "reported",
     "raw": "Lampwick",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.251,
     "max": 1.251,
     "quality": "reported",
     "raw": "1.251",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.149366,
     "max": 0.149366,
     "quality": "reported",
     "raw": "='SAME R Results'!BI4",
     "column": "Material Sort 02122013!BR65",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR65. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.286052,
     "max": 0.286052,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ4",
     "column": "Material Sort 02122013!BS65",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS65. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/53",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 54",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 53,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 57,
     "max": 57,
     "quality": "reported",
     "raw": "57",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Baseline",
     "quality": "reported",
     "raw": "Baseline",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Lamp wick",
     "quality": "reported",
     "raw": "Lampwick",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.245,
     "max": 1.245,
     "quality": "reported",
     "raw": "1.245",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.109626,
     "max": 0.109626,
     "quality": "reported",
     "raw": "='SAME R Results'!BI11",
     "column": "Material Sort 02122013!BR66",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR66. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.252529,
     "max": 0.252529,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ11",
     "column": "Material Sort 02122013!BS66",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS66. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/54",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 55",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 54,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 47,
     "max": 47,
     "quality": "reported",
     "raw": "47",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "High RT/R0 test aging",
     "quality": "reported",
     "raw": "High RT/R0 test aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Lamp wick",
     "quality": "reported",
     "raw": "Lampwick",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.245,
     "max": 1.245,
     "quality": "reported",
     "raw": "1.245",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.116261,
     "max": 0.116261,
     "quality": "reported",
     "raw": "='SAME R Results'!BI12",
     "column": "Material Sort 02122013!BR67",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR67. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.274746,
     "max": 0.274746,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ12",
     "column": "Material Sort 02122013!BS67",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS67. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/55",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 55a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 55,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 218,
     "max": 218,
     "quality": "reported",
     "raw": "218",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Lamp wick",
     "quality": "reported",
     "raw": "Lampwick",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.245,
     "max": 1.245,
     "quality": "reported",
     "raw": "1.245",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.148949,
     "max": 0.148949,
     "quality": "reported",
     "raw": "='SAME R Results'!BI13",
     "column": "Material Sort 02122013!BR79",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR79. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.320466,
     "max": 0.320466,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ13",
     "column": "Material Sort 02122013!BS79",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS79. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/56",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 57",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 56,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "description": {
     "text": "High RT/R0 reburn sample",
     "quality": "reported",
     "raw": "High RT/R0 reburn sample",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Lamp wick",
     "quality": "reported",
     "raw": "Lampwick",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.253,
     "max": 1.253,
     "quality": "reported",
     "raw": "1.253",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.085229,
     "max": 0.085229,
     "quality": "reported",
     "raw": "='SAME R Results'!BI15",
     "column": "Material Sort 02122013!BR68",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR68. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.206587,
     "max": 0.206587,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ15",
     "column": "Material Sort 02122013!BS68",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS68. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/57",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 68",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 57,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 747,
     "max": 747,
     "quality": "reported",
     "raw": "747",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "High temp aged STS det",
     "quality": "reported",
     "raw": "High temp aged STS det",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Lamp wick",
     "quality": "reported",
     "raw": "Lampwick",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.28,
     "max": 1.28,
     "quality": "reported",
     "raw": "1.28",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.230045,
     "max": 0.230045,
     "quality": "reported",
     "raw": "='SAME R Results'!BI37",
     "column": "Material Sort 02122013!BR69",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR69. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.377105,
     "max": 0.377105,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ37",
     "column": "Material Sort 02122013!BS69",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS69. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/58",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 78",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 58,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 37,
     "max": 37,
     "quality": "reported",
     "raw": "37",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Baseline aging",
     "quality": "reported",
     "raw": "Baseline aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Lamp wick",
     "quality": "reported",
     "raw": "Lampwick",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.245,
     "max": 1.245,
     "quality": "reported",
     "raw": "1.245",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.129882,
     "max": 0.129882,
     "quality": "reported",
     "raw": "='SAME R Results'!BI54",
     "column": "Material Sort 02122013!BR70",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR70. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.264574,
     "max": 0.264574,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ54",
     "column": "Material Sort 02122013!BS70",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS70. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/59",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 78a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 59,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 581,
     "max": 581,
     "quality": "reported",
     "raw": "581",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Lamp wick",
     "quality": "reported",
     "raw": "Lampwick",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.245,
     "max": 1.245,
     "quality": "reported",
     "raw": "1.245",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.223515,
     "max": 0.223515,
     "quality": "reported",
     "raw": "='SAME R Results'!BI55",
     "column": "Material Sort 02122013!BR80",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR80. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.355121,
     "max": 0.355121,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ55",
     "column": "Material Sort 02122013!BS80",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS80. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/60",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 80",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 60,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 40,
     "max": 40,
     "quality": "reported",
     "raw": "40",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "High temp aging",
     "quality": "reported",
     "raw": "High temp aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Lamp wick",
     "quality": "reported",
     "raw": "Lampwick",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.28,
     "max": 1.28,
     "quality": "reported",
     "raw": "1.28",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.124296,
     "max": 0.124296,
     "quality": "reported",
     "raw": "='SAME R Results'!BI58",
     "column": "Material Sort 02122013!BR71",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR71. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.28945,
     "max": 0.28945,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ58",
     "column": "Material Sort 02122013!BS71",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS71. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/61",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 80a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 61,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 580,
     "max": 580,
     "quality": "reported",
     "raw": "580",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Lamp wick",
     "quality": "reported",
     "raw": "Lampwick",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.28,
     "max": 1.28,
     "quality": "reported",
     "raw": "1.28",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.253947,
     "max": 0.253947,
     "quality": "reported",
     "raw": "='SAME R Results'!BI59",
     "column": "Material Sort 02122013!BR81",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR81. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.414079,
     "max": 0.414079,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ59",
     "column": "Material Sort 02122013!BS81",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS81. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/62",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 82",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 62,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 39,
     "max": 39,
     "quality": "reported",
     "raw": "39",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Mid temp aging",
     "quality": "reported",
     "raw": "Mid temp aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Lamp wick",
     "quality": "reported",
     "raw": "Lampwick",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.265,
     "max": 1.265,
     "quality": "reported",
     "raw": "1.265",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.138915,
     "max": 0.138915,
     "quality": "reported",
     "raw": "='SAME R Results'!BI62",
     "column": "Material Sort 02122013!BR72",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR72. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.289737,
     "max": 0.289737,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ62",
     "column": "Material Sort 02122013!BS72",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS72. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/63",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 82a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 63,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 579,
     "max": 579,
     "quality": "reported",
     "raw": "579",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Lamp wick",
     "quality": "reported",
     "raw": "Lampwick",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.265,
     "max": 1.265,
     "quality": "reported",
     "raw": "1.265",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.23011,
     "max": 0.23011,
     "quality": "reported",
     "raw": "='SAME R Results'!BI63",
     "column": "Material Sort 02122013!BR82",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR82. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.385394,
     "max": 0.385394,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ63",
     "column": "Material Sort 02122013!BS82",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS82. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/64",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 88",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 64,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "description": {
     "text": "Baseline STS det",
     "quality": "reported",
     "raw": "Baseline STS det",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Lamp wick",
     "quality": "reported",
     "raw": "Lampwick",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.245,
     "max": 1.245,
     "quality": "reported",
     "raw": "1.245",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.125748,
     "max": 0.125748,
     "quality": "reported",
     "raw": "='SAME R Results'!BI74",
     "column": "Material Sort 02122013!BR73",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR73. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.251494,
     "max": 0.251494,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ74",
     "column": "Material Sort 02122013!BS73",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS73. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/65",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 96",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 65,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 34,
     "max": 34,
     "quality": "reported",
     "raw": "34",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "No flow run w/aging",
     "quality": "reported",
     "raw": "No flow run w/aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Lamp wick",
     "quality": "reported",
     "raw": "Lampwick",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.245,
     "max": 1.245,
     "quality": "reported",
     "raw": "1.245",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.184738,
     "max": 0.184738,
     "quality": "reported",
     "raw": "='SAME R Results'!BI87",
     "column": "Material Sort 02122013!BR74",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR74. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.420037,
     "max": 0.420037,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ87",
     "column": "Material Sort 02122013!BS74",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS74. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/66",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 96a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 66,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 582,
     "max": 582,
     "quality": "reported",
     "raw": "582",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Lamp wick",
     "quality": "reported",
     "raw": "Lampwick",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.245,
     "max": 1.245,
     "quality": "reported",
     "raw": "1.245",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.236953,
     "max": 0.236953,
     "quality": "reported",
     "raw": "='SAME R Results'!BI88",
     "column": "Material Sort 02122013!BR83",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR83. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.451416,
     "max": 0.451416,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ88",
     "column": "Material Sort 02122013!BS83",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS83. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/67",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 98",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 67,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 37,
     "max": 37,
     "quality": "reported",
     "raw": "37",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "No flow run w/aging",
     "quality": "reported",
     "raw": "No flow run w/aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Lamp wick",
     "quality": "reported",
     "raw": "Lampwick",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.28,
     "max": 1.28,
     "quality": "reported",
     "raw": "1.28",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.168287,
     "max": 0.168287,
     "quality": "reported",
     "raw": "='SAME R Results'!BI93",
     "column": "Material Sort 02122013!BR75",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR75. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.402952,
     "max": 0.402952,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ93",
     "column": "Material Sort 02122013!BS75",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS75. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/68",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 98a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 68,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 585,
     "max": 585,
     "quality": "reported",
     "raw": "585",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Lamp wick",
     "quality": "reported",
     "raw": "Lampwick",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.28,
     "max": 1.28,
     "quality": "reported",
     "raw": "1.28",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.185754,
     "max": 0.185754,
     "quality": "reported",
     "raw": "='SAME R Results'!BI94",
     "column": "Material Sort 02122013!BR84",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR84. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.43098,
     "max": 0.43098,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ94",
     "column": "Material Sort 02122013!BS84",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS84. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/69",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 106",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 69,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 30,
     "max": 30,
     "quality": "reported",
     "raw": "30",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "No flow run w/aging",
     "quality": "reported",
     "raw": "No flow run w/aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Lamp wick",
     "quality": "reported",
     "raw": "Lampwick",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.28,
     "max": 1.28,
     "quality": "reported",
     "raw": "1.28",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.442392,
     "max": 0.442392,
     "quality": "reported",
     "raw": "='SAME R Results'!BI110",
     "column": "Material Sort 02122013!BR76",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR76. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.599531,
     "max": 0.599531,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ110",
     "column": "Material Sort 02122013!BS76",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS76. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/70",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 106a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 70,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 558,
     "max": 558,
     "quality": "reported",
     "raw": "558",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Lamp wick",
     "quality": "reported",
     "raw": "Lampwick",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.28,
     "max": 1.28,
     "quality": "reported",
     "raw": "1.28",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.402805,
     "max": 0.402805,
     "quality": "reported",
     "raw": "='SAME R Results'!BI111",
     "column": "Material Sort 02122013!BR78",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR78. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.596721,
     "max": 0.596721,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ111",
     "column": "Material Sort 02122013!BS78",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS78. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/71",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 110",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 71,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 21,
     "max": 21,
     "quality": "reported",
     "raw": "21",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "low flow run w/STS",
     "quality": "reported",
     "raw": "low flow run w/STS",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Lamp wick",
     "quality": "reported",
     "raw": "Lampwick",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.28,
     "max": 1.28,
     "quality": "reported",
     "raw": "1.28",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.294593,
     "max": 0.294593,
     "quality": "reported",
     "raw": "='SAME R Results'!BI118",
     "column": "Material Sort 02122013!BR77",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR77. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.479692,
     "max": 0.479692,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ118",
     "column": "Material Sort 02122013!BS77",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS77. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/72",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 50",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 72,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 33,
     "max": 33,
     "quality": "reported",
     "raw": "33",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "B.L. High RT/R0",
     "quality": "reported",
     "raw": "B.L. High RT/R0",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.452,
     "max": 1.452,
     "quality": "reported",
     "raw": "1.452",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.148086,
     "max": 0.148086,
     "quality": "reported",
     "raw": "='SAME R Results'!BI5",
     "column": "Material Sort 02122013!BR140",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR140. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.252954,
     "max": 0.252954,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ5",
     "column": "Material Sort 02122013!BS140",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS140. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/73",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 56",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 73,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 41,
     "max": 41,
     "quality": "reported",
     "raw": "41",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Baseline",
     "quality": "reported",
     "raw": "Baseline",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.445,
     "max": 1.445,
     "quality": "reported",
     "raw": "1.445",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.131837,
     "max": 0.131837,
     "quality": "reported",
     "raw": "='SAME R Results'!BI14",
     "column": "Material Sort 02122013!BR141",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR141. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.184523,
     "max": 0.184523,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ14",
     "column": "Material Sort 02122013!BS141",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS141. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/74",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 57",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 74,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "description": {
     "text": "High RT/R0 reburn sample",
     "quality": "reported",
     "raw": "High RT/R0 reburn sample",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.253,
     "max": 1.253,
     "quality": "reported",
     "raw": "1.253",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    }
   }
  },
  {
   "id": "PSI-101/samer/75",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 58",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 75,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 34,
     "max": 34,
     "quality": "reported",
     "raw": "34",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Baseline aging",
     "quality": "reported",
     "raw": "Baseline aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.445,
     "max": 1.445,
     "quality": "reported",
     "raw": "1.445",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.053128,
     "max": 0.053128,
     "quality": "reported",
     "raw": "='SAME R Results'!BI16",
     "column": "Material Sort 02122013!BR142",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR142. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.149345,
     "max": 0.149345,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ16",
     "column": "Material Sort 02122013!BS142",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS142. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/76",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 58a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 76,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 805,
     "max": 805,
     "quality": "reported",
     "raw": "805",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.445,
     "max": 1.445,
     "quality": "reported",
     "raw": "1.445",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.104591,
     "max": 0.104591,
     "quality": "reported",
     "raw": "='SAME R Results'!BI17",
     "column": "Material Sort 02122013!BR153",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR153. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.232116,
     "max": 0.232116,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ17",
     "column": "Material Sort 02122013!BS153",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS153. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/77",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 69",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 77,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 745,
     "max": 745,
     "quality": "reported",
     "raw": "745",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "High temp aged STS det",
     "quality": "reported",
     "raw": "High temp aged STS det",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.45,
     "max": 1.45,
     "quality": "reported",
     "raw": "1.45",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.473101,
     "max": 0.473101,
     "quality": "reported",
     "raw": "='SAME R Results'!BI38",
     "column": "Material Sort 02122013!BR143",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR143. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.44575,
     "max": 0.44575,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ38",
     "column": "Material Sort 02122013!BS143",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS143. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/78",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 79",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 78,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 33,
     "max": 33,
     "quality": "reported",
     "raw": "33",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Baseline aging",
     "quality": "reported",
     "raw": "Baseline aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.445,
     "max": 1.445,
     "quality": "reported",
     "raw": "1.445",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.16284,
     "max": 0.16284,
     "quality": "reported",
     "raw": "='SAME R Results'!BI56",
     "column": "Material Sort 02122013!BR144",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR144. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.193102,
     "max": 0.193102,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ56",
     "column": "Material Sort 02122013!BS144",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS144. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/79",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 79a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 79,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 560,
     "max": 560,
     "quality": "reported",
     "raw": "560",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.445,
     "max": 1.445,
     "quality": "reported",
     "raw": "1.445",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.266693,
     "max": 0.266693,
     "quality": "reported",
     "raw": "='SAME R Results'!BI57",
     "column": "Material Sort 02122013!BR154",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR154. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.263216,
     "max": 0.263216,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ57",
     "column": "Material Sort 02122013!BS154",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS154. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/80",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 81",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 80,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 30,
     "max": 30,
     "quality": "reported",
     "raw": "30",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "High temp aging",
     "quality": "reported",
     "raw": "High temp aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.45,
     "max": 1.45,
     "quality": "reported",
     "raw": "1.45",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.20838,
     "max": 0.20838,
     "quality": "reported",
     "raw": "='SAME R Results'!BI60",
     "column": "Material Sort 02122013!BR145",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR145. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.251344,
     "max": 0.251344,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ60",
     "column": "Material Sort 02122013!BS145",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS145. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/81",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 81a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 81,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 559,
     "max": 559,
     "quality": "reported",
     "raw": "559",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.45,
     "max": 1.45,
     "quality": "reported",
     "raw": "1.45",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.38499,
     "max": 0.38499,
     "quality": "reported",
     "raw": "='SAME R Results'!BI61",
     "column": "Material Sort 02122013!BR155",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR155. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.348024,
     "max": 0.348024,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ61",
     "column": "Material Sort 02122013!BS155",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS155. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/82",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 83",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 82,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 30,
     "max": 30,
     "quality": "reported",
     "raw": "30",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Mid temp aging",
     "quality": "reported",
     "raw": "Mid temp aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.448,
     "max": 1.448,
     "quality": "reported",
     "raw": "1.448",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.139901,
     "max": 0.139901,
     "quality": "reported",
     "raw": "='SAME R Results'!BI64",
     "column": "Material Sort 02122013!BR146",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR146. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.211433,
     "max": 0.211433,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ64",
     "column": "Material Sort 02122013!BS146",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS146. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/83",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 83a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 83,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 557,
     "max": 557,
     "quality": "reported",
     "raw": "557",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.448,
     "max": 1.448,
     "quality": "reported",
     "raw": "1.448",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.336991,
     "max": 0.336991,
     "quality": "reported",
     "raw": "='SAME R Results'!BI65",
     "column": "Material Sort 02122013!BR156",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR156. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.324881,
     "max": 0.324881,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ65",
     "column": "Material Sort 02122013!BS156",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS156. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/84",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 89",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 84,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 31,
     "max": 31,
     "quality": "reported",
     "raw": "31",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Baseline STS det",
     "quality": "reported",
     "raw": "Baseline STS det",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.445,
     "max": 1.445,
     "quality": "reported",
     "raw": "1.445",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.055089,
     "max": 0.055089,
     "quality": "reported",
     "raw": "='SAME R Results'!BI75",
     "column": "Material Sort 02122013!BR147",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR147. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.151325,
     "max": 0.151325,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ75",
     "column": "Material Sort 02122013!BS147",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS147. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/85",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 100",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 85,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 29,
     "max": 29,
     "quality": "reported",
     "raw": "29",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "No flow run w/ aging",
     "quality": "reported",
     "raw": "No flow run w/ aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.45,
     "max": 1.45,
     "quality": "reported",
     "raw": "1.45",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.196884,
     "max": 0.196884,
     "quality": "reported",
     "raw": "='SAME R Results'!BI97",
     "column": "Material Sort 02122013!BR148",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR148. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.280461,
     "max": 0.280461,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ97",
     "column": "Material Sort 02122013!BS148",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS148. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/86",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 100a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 86,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 560,
     "max": 560,
     "quality": "reported",
     "raw": "560",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.45,
     "max": 1.45,
     "quality": "reported",
     "raw": "1.45",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.230036,
     "max": 0.230036,
     "quality": "reported",
     "raw": "='SAME R Results'!BI98",
     "column": "Material Sort 02122013!BR151",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR151. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.30944,
     "max": 0.30944,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ98",
     "column": "Material Sort 02122013!BS151",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS151. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/87",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 105",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 87,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 24,
     "max": 24,
     "quality": "reported",
     "raw": "24",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "No flow run w/ aging",
     "quality": "reported",
     "raw": "No flow run w/ aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.45,
     "max": 1.45,
     "quality": "reported",
     "raw": "1.45",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.172403,
     "max": 0.172403,
     "quality": "reported",
     "raw": "='SAME R Results'!BI108",
     "column": "Material Sort 02122013!BR149",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR149. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.305789,
     "max": 0.305789,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ108",
     "column": "Material Sort 02122013!BS149",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS149. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/88",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 105a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 88,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 559,
     "max": 559,
     "quality": "reported",
     "raw": "559",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.45,
     "max": 1.45,
     "quality": "reported",
     "raw": "1.45",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.16216,
     "max": 0.16216,
     "quality": "reported",
     "raw": "='SAME R Results'!BI109",
     "column": "Material Sort 02122013!BR152",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR152. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.323999,
     "max": 0.323999,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ109",
     "column": "Material Sort 02122013!BS152",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS152. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/89",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 111",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 89,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 43,
     "max": 43,
     "quality": "reported",
     "raw": "43",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "low flow run w/ STS",
     "quality": "reported",
     "raw": "low flow run w/ STS",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.45,
     "max": 1.45,
     "quality": "reported",
     "raw": "1.45",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.275289,
     "max": 0.275289,
     "quality": "reported",
     "raw": "='SAME R Results'!BI119",
     "column": "Material Sort 02122013!BR150",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR150. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.360404,
     "max": 0.360404,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ119",
     "column": "Material Sort 02122013!BS150",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS150. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/90",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 52",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 90,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "description": {
     "text": "Baseline",
     "quality": "reported",
     "raw": "Baseline",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Pyrell foam",
     "quality": "reported",
     "raw": "Pyrell",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.22,
     "max": 1.22,
     "quality": "reported",
     "raw": "1.22",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.208044,
     "max": 0.208044,
     "quality": "reported",
     "raw": "='SAME R Results'!BI8",
     "column": "Material Sort 02122013!BR85",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR85. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.405191,
     "max": 0.405191,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ8",
     "column": "Material Sort 02122013!BS85",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS85. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/91",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 63",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 91,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 56,
     "max": 56,
     "quality": "reported",
     "raw": "56",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Baseline Aging",
     "quality": "reported",
     "raw": "Baseline Aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Pyrell foam",
     "quality": "reported",
     "raw": "Pyrell",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.22,
     "max": 1.22,
     "quality": "reported",
     "raw": "1.22",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.207039,
     "max": 0.207039,
     "quality": "reported",
     "raw": "='SAME R Results'!BI27",
     "column": "Material Sort 02122013!BR86",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR86. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.391642,
     "max": 0.391642,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ27",
     "column": "Material Sort 02122013!BS86",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS86. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/92",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 63a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 92,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 840,
     "max": 840,
     "quality": "reported",
     "raw": "840",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Pyrell foam",
     "quality": "reported",
     "raw": "Pyrell",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.22,
     "max": 1.22,
     "quality": "reported",
     "raw": "1.22",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.359043,
     "max": 0.359043,
     "quality": "reported",
     "raw": "='SAME R Results'!BI28",
     "column": "Material Sort 02122013!BR98",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR98. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.539242,
     "max": 0.539242,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ28",
     "column": "Material Sort 02122013!BS98",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS98. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/93",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 64",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 93,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 47,
     "max": 47,
     "quality": "reported",
     "raw": "47",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "High Temp aging",
     "quality": "reported",
     "raw": "High Temp aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Pyrell foam",
     "quality": "reported",
     "raw": "Pyrell",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.23,
     "max": 1.23,
     "quality": "reported",
     "raw": "1.23",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.25383,
     "max": 0.25383,
     "quality": "reported",
     "raw": "='SAME R Results'!BI29",
     "column": "Material Sort 02122013!BR87",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR87. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.444712,
     "max": 0.444712,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ29",
     "column": "Material Sort 02122013!BS87",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS87. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/94",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 64a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 94,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 842,
     "max": 842,
     "quality": "reported",
     "raw": "842",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Pyrell foam",
     "quality": "reported",
     "raw": "Pyrell",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.23,
     "max": 1.23,
     "quality": "reported",
     "raw": "1.23",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.450145,
     "max": 0.450145,
     "quality": "reported",
     "raw": "='SAME R Results'!BI30",
     "column": "Material Sort 02122013!BR99",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR99. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.615729,
     "max": 0.615729,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ30",
     "column": "Material Sort 02122013!BS99",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS99. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/95",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 71",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 95,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 750,
     "max": 750,
     "quality": "reported",
     "raw": "750",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "High temp aged STS det",
     "quality": "reported",
     "raw": "High temp aged STS det",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Pyrell foam",
     "quality": "reported",
     "raw": "Pyrell",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.23,
     "max": 1.23,
     "quality": "reported",
     "raw": "1.23",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.321179,
     "max": 0.321179,
     "quality": "reported",
     "raw": "='SAME R Results'!BI40",
     "column": "Material Sort 02122013!BR88",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR88. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.433882,
     "max": 0.433882,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ40",
     "column": "Material Sort 02122013!BS88",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS88. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/96",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 74",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 96,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 48,
     "max": 48,
     "quality": "reported",
     "raw": "48",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Baseline Aging",
     "quality": "reported",
     "raw": "Baseline Aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Pyrell foam",
     "quality": "reported",
     "raw": "Pyrell",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.22,
     "max": 1.22,
     "quality": "reported",
     "raw": "1.22",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.197615,
     "max": 0.197615,
     "quality": "reported",
     "raw": "='SAME R Results'!BI45",
     "column": "Material Sort 02122013!BR89",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR89. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.354728,
     "max": 0.354728,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ45",
     "column": "Material Sort 02122013!BS89",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS89. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/97",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 74a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 97,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 623,
     "max": 623,
     "quality": "reported",
     "raw": "623",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Pyrell foam",
     "quality": "reported",
     "raw": "Pyrell",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.22,
     "max": 1.22,
     "quality": "reported",
     "raw": "1.22",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.378997,
     "max": 0.378997,
     "quality": "reported",
     "raw": "='SAME R Results'!BI46",
     "column": "Material Sort 02122013!BR100",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR100. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.512189,
     "max": 0.512189,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ46",
     "column": "Material Sort 02122013!BS100",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS100. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/98",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 76",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 98,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 51,
     "max": 51,
     "quality": "reported",
     "raw": "51",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "High Temp aging",
     "quality": "reported",
     "raw": "High Temp aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Pyrell foam",
     "quality": "reported",
     "raw": "Pyrell",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.23,
     "max": 1.23,
     "quality": "reported",
     "raw": "1.23",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.353988,
     "max": 0.353988,
     "quality": "reported",
     "raw": "='SAME R Results'!BI49",
     "column": "Material Sort 02122013!BR90",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR90. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.51455,
     "max": 0.51455,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ49",
     "column": "Material Sort 02122013!BS90",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS90. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/99",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 76a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 99,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 625,
     "max": 625,
     "quality": "reported",
     "raw": "625",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Pyrell foam",
     "quality": "reported",
     "raw": "Pyrell",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.23,
     "max": 1.23,
     "quality": "reported",
     "raw": "1.23",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.44481,
     "max": 0.44481,
     "quality": "reported",
     "raw": "='SAME R Results'!BI50",
     "column": "Material Sort 02122013!BR101",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR101. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.642792,
     "max": 0.642792,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ50",
     "column": "Material Sort 02122013!BS101",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS101. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/100",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 84",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 100,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 53,
     "max": 53,
     "quality": "reported",
     "raw": "53",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Mid Temp aging retry",
     "quality": "reported",
     "raw": "Mid Temp aging retry",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Pyrell foam",
     "quality": "reported",
     "raw": "Pyrell",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.225,
     "max": 1.225,
     "quality": "reported",
     "raw": "1.225",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.232682,
     "max": 0.232682,
     "quality": "reported",
     "raw": "='SAME R Results'!BI67",
     "column": "Material Sort 02122013!BR91",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR91. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.412428,
     "max": 0.412428,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ67",
     "column": "Material Sort 02122013!BS91",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS91. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/101",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 84a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 101,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 632,
     "max": 632,
     "quality": "reported",
     "raw": "632",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Pyrell foam",
     "quality": "reported",
     "raw": "Pyrell",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.225,
     "max": 1.225,
     "quality": "reported",
     "raw": "1.225",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.354756,
     "max": 0.354756,
     "quality": "reported",
     "raw": "='SAME R Results'!BI68",
     "column": "Material Sort 02122013!BR102",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR102. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.532943,
     "max": 0.532943,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ68",
     "column": "Material Sort 02122013!BS102",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS102. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/102",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 87",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 102,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 45,
     "max": 45,
     "quality": "reported",
     "raw": "45",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Baseline STS det",
     "quality": "reported",
     "raw": "Baseline STS det",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Pyrell foam",
     "quality": "reported",
     "raw": "Pyrell",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.22,
     "max": 1.22,
     "quality": "reported",
     "raw": "1.22",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.219615,
     "max": 0.219615,
     "quality": "reported",
     "raw": "='SAME R Results'!BI73",
     "column": "Material Sort 02122013!BR92",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR92. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.421093,
     "max": 0.421093,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ73",
     "column": "Material Sort 02122013!BS92",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS92. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/103",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 95",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 103,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 38,
     "max": 38,
     "quality": "reported",
     "raw": "38",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "No flow run w/ aging",
     "quality": "reported",
     "raw": "No flow run w/ aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Pyrell foam",
     "quality": "reported",
     "raw": "Pyrell",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.22,
     "max": 1.22,
     "quality": "reported",
     "raw": "1.22",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.139978,
     "max": 0.139978,
     "quality": "reported",
     "raw": "='SAME R Results'!BI85",
     "column": "Material Sort 02122013!BR93",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR93. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.682805,
     "max": 0.682805,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ85",
     "column": "Material Sort 02122013!BS93",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS93. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/104",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 95a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 104,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Pyrell foam",
     "quality": "reported",
     "raw": "Pyrell",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.22,
     "max": 1.22,
     "quality": "reported",
     "raw": "1.22",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.359849,
     "max": 0.359849,
     "quality": "reported",
     "raw": "='SAME R Results'!BI86",
     "column": "Material Sort 02122013!BR103",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR103. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.843202,
     "max": 0.843202,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ86",
     "column": "Material Sort 02122013!BS103",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS103. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/105",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 97",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 105,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 48,
     "max": 48,
     "quality": "reported",
     "raw": "48",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "No flow run w/aging",
     "quality": "reported",
     "raw": "No flow run w/aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Pyrell foam",
     "quality": "reported",
     "raw": "Pyrell",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.23,
     "max": 1.23,
     "quality": "reported",
     "raw": "1.23",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.241114,
     "max": 0.241114,
     "quality": "reported",
     "raw": "='SAME R Results'!BI91",
     "column": "Material Sort 02122013!BR94",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR94. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.910624,
     "max": 0.910624,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ91",
     "column": "Material Sort 02122013!BS94",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS94. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/106",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 97a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 106,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 624,
     "max": 624,
     "quality": "reported",
     "raw": "624",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Pyrell foam",
     "quality": "reported",
     "raw": "Pyrell",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.23,
     "max": 1.23,
     "quality": "reported",
     "raw": "1.23",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.34921,
     "max": 0.34921,
     "quality": "reported",
     "raw": "='SAME R Results'!BI92",
     "column": "Material Sort 02122013!BR104",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR104. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.941675,
     "max": 0.941675,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ92",
     "column": "Material Sort 02122013!BS104",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS104. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/107",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 107",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 107,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 32,
     "max": 32,
     "quality": "reported",
     "raw": "32",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "Low flow run w/aging",
     "quality": "reported",
     "raw": "Low flow run w/aging",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Pyrell foam",
     "quality": "reported",
     "raw": "Pyrell",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.23,
     "max": 1.23,
     "quality": "reported",
     "raw": "1.23",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.259392,
     "max": 0.259392,
     "quality": "reported",
     "raw": "='SAME R Results'!BI112",
     "column": "Material Sort 02122013!BR95",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR95. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.922457,
     "max": 0.922457,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ112",
     "column": "Material Sort 02122013!BS95",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS95. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/108",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 107a",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 108,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 559,
     "max": 559,
     "quality": "reported",
     "raw": "559",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "aged",
     "quality": "reported",
     "raw": "aged",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Pyrell foam",
     "quality": "reported",
     "raw": "Pyrell",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.23,
     "max": 1.23,
     "quality": "reported",
     "raw": "1.23",
     "column": "Rt/R0"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.282067,
     "max": 0.282067,
     "quality": "reported",
     "raw": "='SAME R Results'!BI113",
     "column": "Material Sort 02122013!BR97",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR97. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.933062,
     "max": 0.933062,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ113",
     "column": "Material Sort 02122013!BS97",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS97. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-101/samer/109",
   "accession": "PSI-101",
   "investigation": "SAME-R",
   "type": "test",
   "label": "Test 113",
   "source_table": "PSI-101_Experimental table_SAME-R.csv",
   "source_row": 109,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-101",
   "values": {
    "aging_time_s": {
     "min": 31,
     "max": 31,
     "quality": "reported",
     "raw": "31",
     "column": "Net aging time (sec)"
    },
    "description": {
     "text": "low flow run w STS",
     "quality": "reported",
     "raw": "low flow run w STS",
     "column": "Description"
    },
    "flow_speed_cm_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "Inlet velocity (cm/s)"
    },
    "fuel": {
     "text": "Pyrell foam",
     "quality": "reported",
     "raw": "Pyrell",
     "column": "Sample Type"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "heater_ratio": {
     "min": 1.23,
     "max": 1.23,
     "quality": "reported",
     "raw": "1.23",
     "column": "Rt/R0"
    },
    "heating_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Duration (sec)"
    },
    "smoke_count_mean_diameter_um": {
     "min": 0.390886,
     "max": 0.390886,
     "quality": "reported",
     "raw": "='SAME R Results'!BI121",
     "column": "Material Sort 02122013!BR96",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BR96. NASA's column \"M1/M0 (micro-m)--AMD\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    },
    "smoke_diameter_average_mass_um": {
     "min": 0.650079,
     "max": 0.650079,
     "quality": "reported",
     "raw": "='SAME R Results'!BJ121",
     "column": "Material Sort 02122013!BS96",
     "note": "From NASA's file PSI-101_Analyzed Data_SAME, SAME-R_Results.xlsx, Material Sort 02122013!BS96. NASA's column \"Diameter of Average mass (micro-m)\". The cell is a formula in NASA's sheet; the value is the result it stores. NASA gives the repeatability of the diameters as +/- 15%."
    }
   }
  },
  {
   "id": "PSI-102/same/1",
   "accession": "PSI-102",
   "investigation": "SAME",
   "type": "test",
   "label": "Sample 1",
   "source_table": "PSI-102_Experimental table_SAME.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-102",
   "values": {
    "aging_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "1",
     "column": "Aging Duration (minutes)"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "Air Flow (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "mass_loss_rate_mg_min": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "Weight loss rate (mg/min)"
    }
   }
  },
  {
   "id": "PSI-102/same/2",
   "accession": "PSI-102",
   "investigation": "SAME",
   "type": "test",
   "label": "Sample 2",
   "source_table": "PSI-102_Experimental table_SAME.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-102",
   "values": {
    "aging_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "1",
     "column": "Aging Duration (minutes)"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "Air Flow (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "mass_loss_rate_mg_min": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Weight loss rate (mg/min)"
    }
   }
  },
  {
   "id": "PSI-102/same/3",
   "accession": "PSI-102",
   "investigation": "SAME",
   "type": "test",
   "label": "Sample 3",
   "source_table": "PSI-102_Experimental table_SAME.csv",
   "source_row": 3,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-102",
   "values": {
    "aging_time_s": {
     "min": 1200,
     "max": 1200,
     "quality": "reported",
     "raw": "20",
     "column": "Aging Duration (minutes)"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "Air Flow (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "mass_loss_rate_mg_min": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "Weight loss rate (mg/min)"
    }
   }
  },
  {
   "id": "PSI-102/same/4",
   "accession": "PSI-102",
   "investigation": "SAME",
   "type": "test",
   "label": "Sample 4",
   "source_table": "PSI-102_Experimental table_SAME.csv",
   "source_row": 4,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-102",
   "values": {
    "aging_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "1",
     "column": "Aging Duration (minutes)"
    },
    "flow_speed_cm_s": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Air Flow (cm/s)"
    },
    "fuel": {
     "text": "Teflon",
     "quality": "reported",
     "raw": "Teflon",
     "column": "Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "mass_loss_rate_mg_min": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "Weight loss rate (mg/min)"
    }
   }
  },
  {
   "id": "PSI-102/same/5",
   "accession": "PSI-102",
   "investigation": "SAME",
   "type": "envelope",
   "label": "Sample 5",
   "source_table": "PSI-102_Experimental table_SAME.csv",
   "source_row": 5,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-102",
   "values": {
    "aging_time_s": {
     "min": 60,
     "max": 1200,
     "levels": [
      60,
      1200
     ],
     "quality": "reported",
     "raw": "1; 20",
     "column": "Aging Duration (minutes)",
     "note": "The PSI table says 'Kapton: same conditions as 1-4'; the levels of those rows are listed."
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 10,
     "levels": [
      5,
      10
     ],
     "quality": "reported",
     "raw": "5; 10",
     "column": "Air Flow (cm/s)",
     "note": "The PSI table says 'Kapton: same conditions as 1-4'; the levels of those rows are listed."
    },
    "fuel": {
     "text": "Kapton",
     "quality": "reported",
     "raw": "Kapton",
     "column": "Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "mass_loss_rate_mg_min": {
     "min": 1,
     "max": 2,
     "levels": [
      1,
      2
     ],
     "quality": "reported",
     "raw": "1; 2",
     "column": "Weight loss rate (mg/min)",
     "note": "The PSI table says 'Kapton: same conditions as 1-4'; the levels of those rows are listed."
    }
   }
  },
  {
   "id": "PSI-102/same/6",
   "accession": "PSI-102",
   "investigation": "SAME",
   "type": "envelope",
   "label": "Sample 6",
   "source_table": "PSI-102_Experimental table_SAME.csv",
   "source_row": 6,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-102",
   "values": {
    "aging_time_s": {
     "min": 60,
     "max": 1200,
     "levels": [
      60,
      1200
     ],
     "quality": "reported",
     "raw": "1; 20",
     "column": "Aging Duration (minutes)",
     "note": "The PSI table says 'Silicone Rubber: same conditions as 1-4'; the levels of those rows are listed."
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 10,
     "levels": [
      5,
      10
     ],
     "quality": "reported",
     "raw": "5; 10",
     "column": "Air Flow (cm/s)",
     "note": "The PSI table says 'Silicone Rubber: same conditions as 1-4'; the levels of those rows are listed."
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone Rubber",
     "column": "Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "mass_loss_rate_mg_min": {
     "min": 1,
     "max": 2,
     "levels": [
      1,
      2
     ],
     "quality": "reported",
     "raw": "1; 2",
     "column": "Weight loss rate (mg/min)",
     "note": "The PSI table says 'Silicone Rubber: same conditions as 1-4'; the levels of those rows are listed."
    }
   }
  },
  {
   "id": "PSI-102/same/7",
   "accession": "PSI-102",
   "investigation": "SAME",
   "type": "envelope",
   "label": "Sample 7",
   "source_table": "PSI-102_Experimental table_SAME.csv",
   "source_row": 7,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-102",
   "values": {
    "aging_time_s": {
     "min": 60,
     "max": 1200,
     "levels": [
      60,
      1200
     ],
     "quality": "reported",
     "raw": "1; 20",
     "column": "Aging Duration (minutes)",
     "note": "The PSI table says 'Lampwick: same conditions as 1-4'; the levels of those rows are listed."
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 10,
     "levels": [
      5,
      10
     ],
     "quality": "reported",
     "raw": "5; 10",
     "column": "Air Flow (cm/s)",
     "note": "The PSI table says 'Lampwick: same conditions as 1-4'; the levels of those rows are listed."
    },
    "fuel": {
     "text": "Lamp wick",
     "quality": "reported",
     "raw": "Lampwick",
     "column": "Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "mass_loss_rate_mg_min": {
     "min": 1,
     "max": 2,
     "levels": [
      1,
      2
     ],
     "quality": "reported",
     "raw": "1; 2",
     "column": "Weight loss rate (mg/min)",
     "note": "The PSI table says 'Lampwick: same conditions as 1-4'; the levels of those rows are listed."
    }
   }
  },
  {
   "id": "PSI-102/same/8",
   "accession": "PSI-102",
   "investigation": "SAME",
   "type": "envelope",
   "label": "Sample 8",
   "source_table": "PSI-102_Experimental table_SAME.csv",
   "source_row": 8,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-102",
   "values": {
    "aging_time_s": {
     "min": 60,
     "max": 1200,
     "levels": [
      60,
      1200
     ],
     "quality": "reported",
     "raw": "1; 20",
     "column": "Aging Duration (minutes)",
     "note": "The PSI table says 'Dibutyl Phthalate: same conditions as 1-4'; the levels of those rows are listed."
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 10,
     "levels": [
      5,
      10
     ],
     "quality": "reported",
     "raw": "5; 10",
     "column": "Air Flow (cm/s)",
     "note": "The PSI table says 'Dibutyl Phthalate: same conditions as 1-4'; the levels of those rows are listed."
    },
    "fuel": {
     "text": "Dibutyl phthalate",
     "quality": "reported",
     "raw": "Dibutyl Phthalate",
     "column": "Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "heated sample (smoke source)",
     "quality": "context",
     "evidence": "smoke particle growth from a pyrolyzing/smoldering source",
     "evidence_source": "psi"
    },
    "mass_loss_rate_mg_min": {
     "min": 1,
     "max": 2,
     "levels": [
      1,
      2
     ],
     "quality": "reported",
     "raw": "1; 2",
     "column": "Weight loss rate (mg/min)",
     "note": "The PSI table says 'Dibutyl Phthalate: same conditions as 1-4'; the levels of those rows are listed."
    }
   }
  },
  {
   "id": "PSI-106/slice/1",
   "accession": "PSI-106",
   "investigation": "SLICE",
   "type": "session",
   "label": "2012-FEB-09",
   "source_table": "PSI-106_Experimental table_Slice.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-106",
   "values": {
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "100% CH4",
     "column": "Fuel Type"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100% CH4",
     "column": "Fuel Type"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox flow duct built for SPICE."
    },
    "test_date": {
     "text": "2012-02-09",
     "quality": "reported",
     "raw": "2012-FEB-09",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-106/slice/2",
   "accession": "PSI-106",
   "investigation": "SLICE",
   "type": "session",
   "label": "2012-FEB-13 SLICE testing with",
   "source_table": "PSI-106_Experimental table_Slice.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-106",
   "values": {
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "40% CH4 (balance N2) including 2 pyrometry calibration tests and 2 fan calibrations",
     "column": "Fuel Type"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "reported",
     "raw": "40% CH4 (balance N2) including 2 pyrometry calibration tests and 2 fan calibrations",
     "column": "Fuel Type"
    },
    "fuel_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "40% CH4 (balance N2) including 2 pyrometry calibration tests and 2 fan calibrations",
     "column": "Fuel Type"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox flow duct built for SPICE."
    },
    "test_date": {
     "text": "2012-02-13",
     "quality": "reported",
     "raw": "2012-FEB-13 SLICE testing with",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-106/slice/3",
   "accession": "PSI-106",
   "investigation": "SLICE",
   "type": "session",
   "label": "2012-FEB-17",
   "source_table": "PSI-106_Experimental table_Slice.csv",
   "source_row": 3,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-106",
   "values": {
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "70% CH4 (balance N2) including 1 pyrometry calibration test",
     "column": "Fuel Type"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "reported",
     "raw": "70% CH4 (balance N2) including 1 pyrometry calibration test",
     "column": "Fuel Type"
    },
    "fuel_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "70% CH4 (balance N2) including 1 pyrometry calibration test",
     "column": "Fuel Type"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox flow duct built for SPICE."
    },
    "test_date": {
     "text": "2012-02-17",
     "quality": "reported",
     "raw": "2012-FEB-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-106/slice/4",
   "accession": "PSI-106",
   "investigation": "SLICE",
   "type": "session",
   "label": "2012-FEB-20",
   "source_table": "PSI-106_Experimental table_Slice.csv",
   "source_row": 4,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-106",
   "values": {
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "20% C2H4 (balance N2)",
     "column": "Fuel Type"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "reported",
     "raw": "20% C2H4 (balance N2)",
     "column": "Fuel Type"
    },
    "fuel_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "20% C2H4 (balance N2)",
     "column": "Fuel Type"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox flow duct built for SPICE."
    },
    "test_date": {
     "text": "2012-02-20",
     "quality": "reported",
     "raw": "2012-FEB-20",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-106/slice/5",
   "accession": "PSI-106",
   "investigation": "SLICE",
   "type": "session",
   "label": "2012-FEB-27",
   "source_table": "PSI-106_Experimental table_Slice.csv",
   "source_row": 5,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-106",
   "values": {
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "100% CH4",
     "column": "Fuel Type"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100% CH4",
     "column": "Fuel Type"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox flow duct built for SPICE."
    },
    "test_date": {
     "text": "2012-02-27",
     "quality": "reported",
     "raw": "2012-FEB-27",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-106/slice/6",
   "accession": "PSI-106",
   "investigation": "SLICE",
   "type": "session",
   "label": "2012-MAR-01",
   "source_table": "PSI-106_Experimental table_Slice.csv",
   "source_row": 6,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-106",
   "values": {
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "40% CH4 (balance N2)",
     "column": "Fuel Type"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "reported",
     "raw": "40% CH4 (balance N2)",
     "column": "Fuel Type"
    },
    "fuel_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "40% CH4 (balance N2)",
     "column": "Fuel Type"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox flow duct built for SPICE."
    },
    "test_date": {
     "text": "2012-03-01",
     "quality": "reported",
     "raw": "2012-MAR-01",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-106/slice/7",
   "accession": "PSI-106",
   "investigation": "SLICE",
   "type": "session",
   "label": "2012-MAR-05 SLICE testing with",
   "source_table": "PSI-106_Experimental table_Slice.csv",
   "source_row": 7,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-106",
   "values": {
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "70% CH4 (balance N2) where the fuel bottle was not emptied (in contrast to most days)",
     "column": "Fuel Type"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "reported",
     "raw": "70% CH4 (balance N2) where the fuel bottle was not emptied (in contrast to most days)",
     "column": "Fuel Type"
    },
    "fuel_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "70% CH4 (balance N2) where the fuel bottle was not emptied (in contrast to most days)",
     "column": "Fuel Type"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox flow duct built for SPICE."
    },
    "test_date": {
     "text": "2012-03-05",
     "quality": "reported",
     "raw": "2012-MAR-05 SLICE testing with",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-106/slice/8",
   "accession": "PSI-106",
   "investigation": "SLICE",
   "type": "session",
   "label": "2012-MAR-09",
   "source_table": "PSI-106_Experimental table_Slice.csv",
   "source_row": 8,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-106",
   "values": {
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "100% C2H6",
     "column": "Fuel Type"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100% C2H6",
     "column": "Fuel Type"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox flow duct built for SPICE."
    },
    "test_date": {
     "text": "2012-03-09",
     "quality": "reported",
     "raw": "2012-MAR-09",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-106/slice/9",
   "accession": "PSI-106",
   "investigation": "SLICE",
   "type": "session",
   "label": "2012-MAR-12",
   "source_table": "PSI-106_Experimental table_Slice.csv",
   "source_row": 9,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-106",
   "values": {
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "100% CH4",
     "column": "Fuel Type"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100% CH4",
     "column": "Fuel Type"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox flow duct built for SPICE."
    },
    "test_date": {
     "text": "2012-03-12",
     "quality": "reported",
     "raw": "2012-MAR-12",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-106/slice/10",
   "accession": "PSI-106",
   "investigation": "SLICE",
   "type": "session",
   "label": "2012-MAR-15",
   "source_table": "PSI-106_Experimental table_Slice.csv",
   "source_row": 10,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-106",
   "values": {
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "20% C2H4 (balance N2)",
     "column": "Fuel Type"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "reported",
     "raw": "20% C2H4 (balance N2)",
     "column": "Fuel Type"
    },
    "fuel_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "20% C2H4 (balance N2)",
     "column": "Fuel Type"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox flow duct built for SPICE."
    },
    "test_date": {
     "text": "2012-03-15",
     "quality": "reported",
     "raw": "2012-MAR-15",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-106/slice/11",
   "accession": "PSI-106",
   "investigation": "SLICE",
   "type": "session",
   "label": "2012-MAR-19 SLICE testing with",
   "source_table": "PSI-106_Experimental table_Slice.csv",
   "source_row": 11,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-106",
   "values": {
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "70% CH4 (balance N2) including 1 pyrometry calibration test and 2 fan calibrations",
     "column": "Fuel Type"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "reported",
     "raw": "70% CH4 (balance N2) including 1 pyrometry calibration test and 2 fan calibrations",
     "column": "Fuel Type"
    },
    "fuel_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "70% CH4 (balance N2) including 1 pyrometry calibration test and 2 fan calibrations",
     "column": "Fuel Type"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox flow duct built for SPICE."
    },
    "test_date": {
     "text": "2012-03-19",
     "quality": "reported",
     "raw": "2012-MAR-19 SLICE testing with",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-106/slice/12",
   "accession": "PSI-106",
   "investigation": "SLICE",
   "type": "session",
   "label": "2012-MAR-23 Last day of testing: SPICE testing with 100% C3H8 and then 100%",
   "source_table": "PSI-106_Experimental table_Slice.csv",
   "source_row": 12,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-106",
   "values": {
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Type"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Type"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "observed under controlled coflow air conditions",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox flow duct built for SPICE."
    },
    "test_date": {
     "text": "2012-03-23",
     "quality": "reported",
     "raw": "2012-MAR-23 Last day of testing: SPICE testing with 100% C3H8 and then 100%",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-107/spice/1",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 14:37:08",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 36.39,
     "max": 36.39,
     "quality": "reported",
     "raw": "36.39",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.971,
     "max": 1.971,
     "quality": "reported",
     "raw": "1.971",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/2",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 14:37:08",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 36.39,
     "max": 36.39,
     "quality": "reported",
     "raw": "36.39",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.971,
     "max": 1.971,
     "quality": "reported",
     "raw": "1.971",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/3",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 14:50:07",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 3,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 20.58149999999999,
     "max": 20.58149999999999,
     "quality": "reported",
     "raw": "20.58149999999999",
     "column": "Data record of Video and Stills!Q7",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q7. Column Q (\"Length\") of NASA's Data II sheet, row 7. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 40.15,
     "max": 40.15,
     "quality": "reported",
     "raw": "40.15",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.968,
     "max": 0.968,
     "quality": "reported",
     "raw": "0.968",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/4",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 14:50:07",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 4,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_height_nikon_mm": {
     "min": 21.08392258163981,
     "max": 21.08392258163981,
     "quality": "reported",
     "raw": "21.08392258163981",
     "column": "Data record of Video and Stills!Y8",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Y8. Column Y (\"Flame Height Nikon (mm)\") of NASA's Data II sheet, row 8. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flame_width_max_mm": {
     "min": 5.791165775582442,
     "max": 5.791165775582442,
     "quality": "reported",
     "raw": "5.791165775582442",
     "column": "Data record of Video and Stills!W8",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!W8. Column W (\"Max Flame Width (mm)\") of NASA's Data II sheet, row 8. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 40.15,
     "max": 40.15,
     "quality": "reported",
     "raw": "40.15",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.98,
     "max": 0.98,
     "quality": "reported",
     "raw": "0.98",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/5",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 15:35:44",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 5,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 57.08,
     "max": 57.08,
     "quality": "reported",
     "raw": "57.08",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.62,
     "max": 2.62,
     "quality": "reported",
     "raw": "2.62",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/6",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 15:35:44",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 6,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 57.08,
     "max": 57.08,
     "quality": "reported",
     "raw": "57.08",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.62,
     "max": 2.62,
     "quality": "reported",
     "raw": "2.62",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/7",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 15:35:44",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 7,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_height_nikon_mm": {
     "min": 57.7184083027317,
     "max": 57.7184083027317,
     "quality": "reported",
     "raw": "57.7184083027317",
     "column": "Data record of Video and Stills!Y11",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Y11. Column Y (\"Flame Height Nikon (mm)\") of NASA's Data II sheet, row 11. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flame_width_max_mm": {
     "min": 6.606218736590342,
     "max": 6.606218736590342,
     "quality": "reported",
     "raw": "6.606218736590342",
     "column": "Data record of Video and Stills!W11",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!W11. Column W (\"Max Flame Width (mm)\") of NASA's Data II sheet, row 11. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 57.08,
     "max": 57.08,
     "quality": "reported",
     "raw": "57.08",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.608,
     "max": 2.608,
     "quality": "reported",
     "raw": "2.608",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/8",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 15:42:22",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 8,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 58.02,
     "max": 58.02,
     "quality": "reported",
     "raw": "58.02",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.31,
     "max": 1.31,
     "quality": "reported",
     "raw": "1.31",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/9",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 15:42:22",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 9,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 58.02,
     "max": 58.02,
     "quality": "reported",
     "raw": "58.02",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.31,
     "max": 1.31,
     "quality": "reported",
     "raw": "1.31",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/10",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 15:48:39",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 10,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 17.59,
     "max": 17.59,
     "quality": "reported",
     "raw": "17.59",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.207,
     "max": 1.207,
     "quality": "reported",
     "raw": "1.207",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/11",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 15:48:39",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 11,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 17.59,
     "max": 17.59,
     "quality": "reported",
     "raw": "17.59",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.207,
     "max": 1.207,
     "quality": "reported",
     "raw": "1.207",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/12",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 15:50:59",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 12,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 16.65,
     "max": 16.65,
     "quality": "reported",
     "raw": "16.65",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.661,
     "max": 0.661,
     "quality": "reported",
     "raw": "0.661",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/13",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 15:50:59",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 13,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 16.65,
     "max": 16.65,
     "quality": "reported",
     "raw": "16.65",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.661,
     "max": 0.661,
     "quality": "reported",
     "raw": "0.661",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/14",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 17:11:46",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 14,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 110.4401,
     "max": 110.4401,
     "quality": "reported",
     "raw": "110.4401",
     "column": "Data record of Video and Stills!Q18",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q18. Column Q (\"Length\") of NASA's Data II sheet, row 18. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 33.57,
     "max": 33.57,
     "quality": "reported",
     "raw": "33.57",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 4.158,
     "max": 4.158,
     "quality": "reported",
     "raw": "4.158",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/15",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 17:11:46",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 15,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_height_nikon_mm": {
     "min": 109.88179780723726,
     "max": 109.88179780723726,
     "quality": "reported",
     "raw": "109.88179780723726",
     "column": "Data record of Video and Stills!Y19",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Y19. Column Y (\"Flame Height Nikon (mm)\") of NASA's Data II sheet, row 19. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flame_width_max_mm": {
     "min": 6.563321212326768,
     "max": 6.563321212326768,
     "quality": "reported",
     "raw": "6.563321212326768",
     "column": "Data record of Video and Stills!W19",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!W19. Column W (\"Max Flame Width (mm)\") of NASA's Data II sheet, row 19. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 33.57,
     "max": 33.57,
     "quality": "reported",
     "raw": "33.57",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 4.203,
     "max": 4.203,
     "quality": "reported",
     "raw": "4.203",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/16",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 17:15:05",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 16,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 47.6204,
     "max": 47.6204,
     "quality": "reported",
     "raw": "47.6204",
     "column": "Data record of Video and Stills!Q20",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q20. Column Q (\"Length\") of NASA's Data II sheet, row 20. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 34.51,
     "max": 34.51,
     "quality": "reported",
     "raw": "34.51",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.073,
     "max": 2.073,
     "quality": "reported",
     "raw": "2.073",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/17",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 17:15:05",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 17,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_height_nikon_mm": {
     "min": 48.4525430617998,
     "max": 48.4525430617998,
     "quality": "reported",
     "raw": "48.4525430617998",
     "column": "Data record of Video and Stills!Y21",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Y21. Column Y (\"Flame Height Nikon (mm)\") of NASA's Data II sheet, row 21. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flame_width_max_mm": {
     "min": 5.919858348373164,
     "max": 5.919858348373164,
     "quality": "reported",
     "raw": "5.919858348373164",
     "column": "Data record of Video and Stills!W21",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!W21. Column W (\"Max Flame Width (mm)\") of NASA's Data II sheet, row 21. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 35.45,
     "max": 35.45,
     "quality": "reported",
     "raw": "35.45",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.073,
     "max": 2.073,
     "quality": "reported",
     "raw": "2.073",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/18",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 17:20:46",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 18,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_height_nikon_mm": {
     "min": 107.0505612058414,
     "max": 107.0505612058414,
     "quality": "reported",
     "raw": "107.0505612058414",
     "column": "Data record of Video and Stills!Y22",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Y22. Column Y (\"Flame Height Nikon (mm)\") of NASA's Data II sheet, row 22. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flame_width_max_mm": {
     "min": 6.177243493954605,
     "max": 6.177243493954605,
     "quality": "reported",
     "raw": "6.177243493954605",
     "column": "Data record of Video and Stills!W22",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!W22. Column W (\"Max Flame Width (mm)\") of NASA's Data II sheet, row 22. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 58.02,
     "max": 58.02,
     "quality": "reported",
     "raw": "58.02",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 4.397,
     "max": 4.397,
     "quality": "reported",
     "raw": "4.397",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/19",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 17:20:47",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 19,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 58.96,
     "max": 58.96,
     "quality": "reported",
     "raw": "58.96",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 4.397,
     "max": 4.397,
     "quality": "reported",
     "raw": "4.397",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/20",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 17:23:03",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 20,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 45.38409999999999,
     "max": 45.38409999999999,
     "quality": "reported",
     "raw": "45.38409999999999",
     "column": "Data record of Video and Stills!Q24",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q24. Column Q (\"Length\") of NASA's Data II sheet, row 24. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 57.08,
     "max": 57.08,
     "quality": "reported",
     "raw": "57.08",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.176,
     "max": 2.176,
     "quality": "reported",
     "raw": "2.176",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/21",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 17:23:03",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 21,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 57.08,
     "max": 57.08,
     "quality": "reported",
     "raw": "57.08",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.164,
     "max": 2.164,
     "quality": "reported",
     "raw": "2.164",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/22",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 17:27:48",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 22,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 102.5114,
     "max": 102.5114,
     "quality": "reported",
     "raw": "102.5114",
     "column": "Data record of Video and Stills!Q26",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q26. Column Q (\"Length\") of NASA's Data II sheet, row 26. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 17.59,
     "max": 17.59,
     "quality": "reported",
     "raw": "17.59",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 3.816,
     "max": 3.816,
     "quality": "reported",
     "raw": "3.816",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    },
    "smoke_point_length_mm": {
     "min": 105.220756,
     "max": 105.220756,
     "quality": "reported",
     "raw": "0.10522075589027845",
     "column": "Smoke Point Datasheet (2)!AL10",
     "note": "From NASA's file PSI-107_Raw Data_SmokePointReview-0g-3.xlsx, Smoke Point Datasheet (2)!AL10. Cell AL10, column \"Length\" in m, times 1000 gives mm. The same value is in P10 (mm, a formula: pixel count from the video times NASA's calibration) and in S10 of the first sheet (\"smk pt mm\"). Test point E7-1."
    }
   }
  },
  {
   "id": "PSI-107/spice/23",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 17:27:48",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 23,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_height_nikon_mm": {
     "min": 109.88179780723726,
     "max": 109.88179780723726,
     "quality": "reported",
     "raw": "109.88179780723726",
     "column": "Data record of Video and Stills!Y27",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Y27. Column Y (\"Flame Height Nikon (mm)\") of NASA's Data II sheet, row 27. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flame_width_max_mm": {
     "min": 6.777808833644636,
     "max": 6.777808833644636,
     "quality": "reported",
     "raw": "6.777808833644636",
     "column": "Data record of Video and Stills!W27",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!W27. Column W (\"Max Flame Width (mm)\") of NASA's Data II sheet, row 27. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 18.53,
     "max": 18.53,
     "quality": "reported",
     "raw": "18.53",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 3.782,
     "max": 3.782,
     "quality": "reported",
     "raw": "3.782",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/24",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 17:29:49",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 24,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 47.6204,
     "max": 47.6204,
     "quality": "reported",
     "raw": "47.6204",
     "column": "Data record of Video and Stills!Q28",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q28. Column Q (\"Length\") of NASA's Data II sheet, row 28. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 16.65,
     "max": 16.65,
     "quality": "reported",
     "raw": "16.65",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.879,
     "max": 1.879,
     "quality": "reported",
     "raw": "1.879",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/25",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 45 17:29:48",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 25,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_height_nikon_mm": {
     "min": 48.53833811032695,
     "max": 48.53833811032695,
     "quality": "reported",
     "raw": "48.53833811032695",
     "column": "Data record of Video and Stills!Y29",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Y29. Column Y (\"Flame Height Nikon (mm)\") of NASA's Data II sheet, row 29. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flame_width_max_mm": {
     "min": 6.3488335910088995,
     "max": 6.3488335910088995,
     "quality": "reported",
     "raw": "6.3488335910088995",
     "column": "Data record of Video and Stills!W29",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!W29. Column W (\"Max Flame Width (mm)\") of NASA's Data II sheet, row 29. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 16.65,
     "max": 16.65,
     "quality": "reported",
     "raw": "16.65",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.164,
     "max": 2.164,
     "quality": "reported",
     "raw": "2.164",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/26",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 14:32:05",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 26,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 87.0606,
     "max": 87.0606,
     "quality": "reported",
     "raw": "87.0606",
     "column": "Data record of Video and Stills!Q30",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q30. Column Q (\"Length\") of NASA's Data II sheet, row 30. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 35.45,
     "max": 35.45,
     "quality": "reported",
     "raw": "35.45",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 3.679,
     "max": 3.679,
     "quality": "reported",
     "raw": "3.679",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/27",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 14:33:57",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 27,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 86.8573,
     "max": 86.8573,
     "quality": "reported",
     "raw": "86.8573",
     "column": "Data record of Video and Stills!Q31",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q31. Column Q (\"Length\") of NASA's Data II sheet, row 31. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 35.45,
     "max": 35.45,
     "quality": "reported",
     "raw": "35.45",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 3.645,
     "max": 3.645,
     "quality": "reported",
     "raw": "3.645",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/28",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 14.34.57",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 28,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_height_nikon_mm": {
     "min": 80.19671101684429,
     "max": 80.19671101684429,
     "quality": "reported",
     "raw": "80.19671101684429",
     "column": "Data record of Video and Stills!Y32",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Y32. Column Y (\"Flame Height Nikon (mm)\") of NASA's Data II sheet, row 32. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flame_width_max_mm": {
     "min": 4.461342523411659,
     "max": 4.461342523411659,
     "quality": "reported",
     "raw": "4.461342523411659",
     "column": "Data record of Video and Stills!W32",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!W32. Column W (\"Max Flame Width (mm)\") of NASA's Data II sheet, row 32. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 35.45,
     "max": 35.45,
     "quality": "reported",
     "raw": "35.45",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 3.645,
     "max": 3.645,
     "quality": "reported",
     "raw": "3.645",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/29",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 14:43:57",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 29,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 49.24679999999999,
     "max": 49.24679999999999,
     "quality": "reported",
     "raw": "49.24679999999999",
     "column": "Data record of Video and Stills!Q33",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q33. Column Q (\"Length\") of NASA's Data II sheet, row 33. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 58.02,
     "max": 58.02,
     "quality": "reported",
     "raw": "58.02",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.255,
     "max": 2.255,
     "quality": "reported",
     "raw": "2.255",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/30",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 14.43.58",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 30,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.255,
     "max": 2.255,
     "quality": "reported",
     "raw": "2.255",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/31",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 14:48:19",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 31,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 27.69699999999999,
     "max": 27.69699999999999,
     "quality": "reported",
     "raw": "27.69699999999999",
     "column": "Data record of Video and Stills!Q35",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q35. Column Q (\"Length\") of NASA's Data II sheet, row 35. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 17.59,
     "max": 17.59,
     "quality": "reported",
     "raw": "17.59",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.162,
     "max": 1.162,
     "quality": "reported",
     "raw": "1.162",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/32",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 14:48:19",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 32,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 55.95569999999999,
     "max": 55.95569999999999,
     "quality": "reported",
     "raw": "55.95569999999999",
     "column": "Data record of Video and Stills!Q36",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q36. Column Q (\"Length\") of NASA's Data II sheet, row 36. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 16.65,
     "max": 16.65,
     "quality": "reported",
     "raw": "16.65",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.29,
     "max": 2.29,
     "quality": "reported",
     "raw": "2.29",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/33",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 14:48:19",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 33,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 86.4507,
     "max": 86.4507,
     "quality": "reported",
     "raw": "86.4507",
     "column": "Data record of Video and Stills!Q37",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q37. Column Q (\"Length\") of NASA's Data II sheet, row 37. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 15.71,
     "max": 15.71,
     "quality": "reported",
     "raw": "15.71",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 3.429,
     "max": 3.429,
     "quality": "reported",
     "raw": "3.429",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/34",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 14:48:19",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 34,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 15.092399999999998,
     "max": 15.092399999999998,
     "quality": "reported",
     "raw": "15.092399999999998",
     "column": "Data record of Video and Stills!Q38",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q38. Column Q (\"Length\") of NASA's Data II sheet, row 38. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 15.71,
     "max": 15.71,
     "quality": "reported",
     "raw": "15.71",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.592,
     "max": 0.592,
     "quality": "reported",
     "raw": "0.592",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/35",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 14:48:19",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 35,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 41.5214,
     "max": 41.5214,
     "quality": "reported",
     "raw": "41.5214",
     "column": "Data record of Video and Stills!Q39",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q39. Column Q (\"Length\") of NASA's Data II sheet, row 39. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 15.71,
     "max": 15.71,
     "quality": "reported",
     "raw": "15.71",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.686,
     "max": 1.686,
     "quality": "reported",
     "raw": "1.686",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/36",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 14.48.19",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 36,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_height_nikon_mm": {
     "min": 27.43275617264871,
     "max": 27.43275617264871,
     "quality": "reported",
     "raw": "27.43275617264871",
     "column": "Data record of Video and Stills!Y40",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Y40. Column Y (\"Flame Height Nikon (mm)\") of NASA's Data II sheet, row 40. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flame_width_max_mm": {
     "min": 3.9465722322487755,
     "max": 3.9465722322487755,
     "quality": "reported",
     "raw": "3.9465722322487755",
     "column": "Data record of Video and Stills!W40",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!W40. Column W (\"Max Flame Width (mm)\") of NASA's Data II sheet, row 40. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 17.59,
     "max": 17.59,
     "quality": "reported",
     "raw": "17.59",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.15,
     "max": 1.15,
     "quality": "reported",
     "raw": "1.15",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/37",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 14.48.19",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 37,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_height_nikon_mm": {
     "min": 27.43275617264871,
     "max": 27.43275617264871,
     "quality": "reported",
     "raw": "27.43275617264871",
     "column": "Data record of Video and Stills!Y41",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Y41. Column Y (\"Flame Height Nikon (mm)\") of NASA's Data II sheet, row 41. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flame_width_max_mm": {
     "min": 3.9465722322487755,
     "max": 3.9465722322487755,
     "quality": "reported",
     "raw": "3.9465722322487755",
     "column": "Data record of Video and Stills!W41",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!W41. Column W (\"Max Flame Width (mm)\") of NASA's Data II sheet, row 41. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 17.59,
     "max": 17.59,
     "quality": "reported",
     "raw": "17.59",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.162,
     "max": 1.162,
     "quality": "reported",
     "raw": "1.162",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/38",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 14.48.19",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 38,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_height_nikon_mm": {
     "min": 56.00250733218876,
     "max": 56.00250733218876,
     "quality": "reported",
     "raw": "56.00250733218876",
     "column": "Data record of Video and Stills!Y42",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Y42. Column Y (\"Flame Height Nikon (mm)\") of NASA's Data II sheet, row 42. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flame_width_max_mm": {
     "min": 4.718727668993101,
     "max": 4.718727668993101,
     "quality": "reported",
     "raw": "4.718727668993101",
     "column": "Data record of Video and Stills!W42",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!W42. Column W (\"Max Flame Width (mm)\") of NASA's Data II sheet, row 42. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 17.59,
     "max": 17.59,
     "quality": "reported",
     "raw": "17.59",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.29,
     "max": 2.29,
     "quality": "reported",
     "raw": "2.29",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/39",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 14.48.19",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 39,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_height_nikon_mm": {
     "min": 83.19953771529445,
     "max": 83.19953771529445,
     "quality": "reported",
     "raw": "83.19953771529445",
     "column": "Data record of Video and Stills!Y43",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Y43. Column Y (\"Flame Height Nikon (mm)\") of NASA's Data II sheet, row 43. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flame_width_max_mm": {
     "min": 4.804522717520249,
     "max": 4.804522717520249,
     "quality": "reported",
     "raw": "4.804522717520249",
     "column": "Data record of Video and Stills!W43",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!W43. Column W (\"Max Flame Width (mm)\") of NASA's Data II sheet, row 43. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 16.65,
     "max": 16.65,
     "quality": "reported",
     "raw": "16.65",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 3.406,
     "max": 3.406,
     "quality": "reported",
     "raw": "3.406",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/40",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 14.48.19",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 40,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_height_nikon_mm": {
     "min": 14.391908796522316,
     "max": 14.391908796522316,
     "quality": "reported",
     "raw": "14.391908796522316",
     "column": "Data record of Video and Stills!Y44",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Y44. Column Y (\"Flame Height Nikon (mm)\") of NASA's Data II sheet, row 44. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flame_width_max_mm": {
     "min": 3.5175969896130392,
     "max": 3.5175969896130392,
     "quality": "reported",
     "raw": "3.5175969896130392",
     "column": "Data record of Video and Stills!W44",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!W44. Column W (\"Max Flame Width (mm)\") of NASA's Data II sheet, row 44. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 15.71,
     "max": 15.71,
     "quality": "reported",
     "raw": "15.71",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.592,
     "max": 0.592,
     "quality": "reported",
     "raw": "0.592",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/41",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 14.48.19",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 41,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_height_nikon_mm": {
     "min": 41.9321193737366,
     "max": 41.9321193737366,
     "quality": "reported",
     "raw": "41.9321193737366",
     "column": "Data record of Video and Stills!Y45",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Y45. Column Y (\"Flame Height Nikon (mm)\") of NASA's Data II sheet, row 45. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flame_width_max_mm": {
     "min": 4.547137571938807,
     "max": 4.547137571938807,
     "quality": "reported",
     "raw": "4.547137571938807",
     "column": "Data record of Video and Stills!W45",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!W45. Column W (\"Max Flame Width (mm)\") of NASA's Data II sheet, row 45. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 15.71,
     "max": 15.71,
     "quality": "reported",
     "raw": "15.71",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.709,
     "max": 1.709,
     "quality": "reported",
     "raw": "1.709",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/42",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 14.48.19",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 42,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_height_nikon_mm": {
     "min": 40.90257879141083,
     "max": 40.90257879141083,
     "quality": "reported",
     "raw": "40.90257879141083",
     "column": "Data record of Video and Stills!Y46",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Y46. Column Y (\"Flame Height Nikon (mm)\") of NASA's Data II sheet, row 46. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flame_width_max_mm": {
     "min": 4.375547474884512,
     "max": 4.375547474884512,
     "quality": "reported",
     "raw": "4.375547474884512",
     "column": "Data record of Video and Stills!W46",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!W46. Column W (\"Max Flame Width (mm)\") of NASA's Data II sheet, row 46. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 15.71,
     "max": 15.71,
     "quality": "reported",
     "raw": "15.71",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.686,
     "max": 1.686,
     "quality": "reported",
     "raw": "1.686",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/43",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 16:53:44",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 43,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 61.8514,
     "max": 61.8514,
     "quality": "reported",
     "raw": "61.8514",
     "column": "Data record of Video and Stills!Q47",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q47. Column Q (\"Length\") of NASA's Data II sheet, row 47. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 42.97,
     "max": 42.97,
     "quality": "reported",
     "raw": "42.97",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.761,
     "max": 2.761,
     "quality": "reported",
     "raw": "2.761",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/44",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 16.53.45",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 44,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/45",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 17:01:35",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 45,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 59.8184,
     "max": 59.8184,
     "quality": "reported",
     "raw": "59.8184",
     "column": "Data record of Video and Stills!Q49",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q49. Column Q (\"Length\") of NASA's Data II sheet, row 49. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 46.73,
     "max": 46.73,
     "quality": "reported",
     "raw": "46.73",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.718,
     "max": 2.718,
     "quality": "reported",
     "raw": "2.718",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/46",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 17:01:35",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 46,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 28.3069,
     "max": 28.3069,
     "quality": "reported",
     "raw": "28.3069",
     "column": "Data record of Video and Stills!Q50",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q50. Column Q (\"Length\") of NASA's Data II sheet, row 50. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 45.79,
     "max": 45.79,
     "quality": "reported",
     "raw": "45.79",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.364,
     "max": 1.364,
     "quality": "reported",
     "raw": "1.364",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/47",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 17.01.36",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 47,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 46.73,
     "max": 46.73,
     "quality": "reported",
     "raw": "46.73",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.718,
     "max": 2.718,
     "quality": "reported",
     "raw": "2.718",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/48",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 17.01.36",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 48,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.364,
     "max": 1.364,
     "quality": "reported",
     "raw": "1.364",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/49",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 17:11:21",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 49,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 54.93919999999999,
     "max": 54.93919999999999,
     "quality": "reported",
     "raw": "54.93919999999999",
     "column": "Data record of Video and Stills!Q53",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q53. Column Q (\"Length\") of NASA's Data II sheet, row 53. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 35.45,
     "max": 35.45,
     "quality": "reported",
     "raw": "35.45",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.352,
     "max": 2.352,
     "quality": "reported",
     "raw": "2.352",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/50",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 17:11:21",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 50,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 24.444199999999995,
     "max": 24.444199999999995,
     "quality": "reported",
     "raw": "24.444199999999995",
     "column": "Data record of Video and Stills!Q54",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q54. Column Q (\"Length\") of NASA's Data II sheet, row 54. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 35.45,
     "max": 35.45,
     "quality": "reported",
     "raw": "35.45",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.171,
     "max": 1.171,
     "quality": "reported",
     "raw": "1.171",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/51",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 17.11.21",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 51,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 36.39,
     "max": 36.39,
     "quality": "reported",
     "raw": "36.39",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.342,
     "max": 2.342,
     "quality": "reported",
     "raw": "2.342",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/52",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 17.11.21",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 52,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.16,
     "max": 1.16,
     "quality": "reported",
     "raw": "1.16",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/53",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 1744",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 53,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 22.29,
     "max": 22.29,
     "quality": "reported",
     "raw": "22.29",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.772,
     "max": 1.772,
     "quality": "reported",
     "raw": "1.772",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/54",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 1746",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 54,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 22.29,
     "max": 22.29,
     "quality": "reported",
     "raw": "22.29",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.87,
     "max": 0.87,
     "quality": "reported",
     "raw": "0.87",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/55",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 17.44.38",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 55,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 22.29,
     "max": 22.29,
     "quality": "reported",
     "raw": "22.29",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.762,
     "max": 1.762,
     "quality": "reported",
     "raw": "1.762",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/56",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 48 17.44.38",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 56,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.87,
     "max": 0.87,
     "quality": "reported",
     "raw": "0.87",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/57",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 11:38:51",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 57,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 91.73649999999999,
     "max": 91.73649999999999,
     "quality": "reported",
     "raw": "91.73649999999999",
     "column": "Data record of Video and Stills!Q61",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q61. Column Q (\"Length\") of NASA's Data II sheet, row 61. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 33.57,
     "max": 33.57,
     "quality": "reported",
     "raw": "33.57",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 3.373,
     "max": 3.373,
     "quality": "reported",
     "raw": "3.373",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/58",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 11:38:51",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 58,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 49.23,
     "max": 49.23,
     "quality": "reported",
     "raw": "49.23",
     "column": "Data record of Video and Stills!Q62",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q62. Column Q (\"Length\") of NASA's Data II sheet, row 62. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 34.51,
     "max": 34.51,
     "quality": "reported",
     "raw": "34.51",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.686,
     "max": 1.686,
     "quality": "reported",
     "raw": "1.686",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/59",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 11.38.51",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 59,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 32.63,
     "max": 32.63,
     "quality": "reported",
     "raw": "32.63",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 3.384,
     "max": 3.384,
     "quality": "reported",
     "raw": "3.384",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/60",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 11.38.51",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 60,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.697,
     "max": 1.697,
     "quality": "reported",
     "raw": "1.697",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/61",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 11:42:49",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 61,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 73.0329,
     "max": 73.0329,
     "quality": "reported",
     "raw": "73.0329",
     "column": "Data record of Video and Stills!Q65",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q65. Column Q (\"Length\") of NASA's Data II sheet, row 65. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 20.41,
     "max": 20.41,
     "quality": "reported",
     "raw": "20.41",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.492,
     "max": 2.492,
     "quality": "reported",
     "raw": "2.492",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/62",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 11:42:49",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 62,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 30.3399,
     "max": 30.3399,
     "quality": "reported",
     "raw": "30.3399",
     "column": "Data record of Video and Stills!Q66",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q66. Column Q (\"Length\") of NASA's Data II sheet, row 66. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 21.35,
     "max": 21.35,
     "quality": "reported",
     "raw": "21.35",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.235,
     "max": 1.235,
     "quality": "reported",
     "raw": "1.235",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/63",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 11.42.50",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 63,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 20.41,
     "max": 20.41,
     "quality": "reported",
     "raw": "20.41",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.492,
     "max": 2.492,
     "quality": "reported",
     "raw": "2.492",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/64",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 11.42.50",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 64,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.235,
     "max": 1.235,
     "quality": "reported",
     "raw": "1.235",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/65",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 11:49:35",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 65,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 60.42829999999999,
     "max": 60.42829999999999,
     "quality": "reported",
     "raw": "60.42829999999999",
     "column": "Data record of Video and Stills!Q69",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q69. Column Q (\"Length\") of NASA's Data II sheet, row 69. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 15.71,
     "max": 15.71,
     "quality": "reported",
     "raw": "15.71",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.062,
     "max": 2.062,
     "quality": "reported",
     "raw": "2.062",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/66",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 11:49:35",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 66,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 25.25739999999999,
     "max": 25.25739999999999,
     "quality": "reported",
     "raw": "25.25739999999999",
     "column": "Data record of Video and Stills!Q70",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q70. Column Q (\"Length\") of NASA's Data II sheet, row 70. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 15.71,
     "max": 15.71,
     "quality": "reported",
     "raw": "15.71",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.01,
     "max": 1.01,
     "quality": "reported",
     "raw": "1.01",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/67",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 11.49.35",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 67,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 15.71,
     "max": 15.71,
     "quality": "reported",
     "raw": "15.71",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.073,
     "max": 2.073,
     "quality": "reported",
     "raw": "2.073",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/68",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 11.49.35",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 68,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 15.71,
     "max": 15.71,
     "quality": "reported",
     "raw": "15.71",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.01,
     "max": 1.01,
     "quality": "reported",
     "raw": "1.01",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/69",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 12.01.47",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 69,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 33.57,
     "max": 33.57,
     "quality": "reported",
     "raw": "33.57",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.59,
     "max": 1.59,
     "quality": "reported",
     "raw": "1.59",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/70",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 12.01.47",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 70,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 33.57,
     "max": 33.57,
     "quality": "reported",
     "raw": "33.57",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.257,
     "max": 1.257,
     "quality": "reported",
     "raw": "1.257",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/71",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 12:21:19",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 71,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 25.46069999999999,
     "max": 25.46069999999999,
     "quality": "reported",
     "raw": "25.46069999999999",
     "column": "Data record of Video and Stills!Q75",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q75. Column Q (\"Length\") of NASA's Data II sheet, row 75. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 32.63,
     "max": 32.63,
     "quality": "reported",
     "raw": "32.63",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.063,
     "max": 1.063,
     "quality": "reported",
     "raw": "1.063",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/72",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 12:21:19",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 72,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 12.246199999999988,
     "max": 12.246199999999988,
     "quality": "reported",
     "raw": "12.246199999999988",
     "column": "Data record of Video and Stills!Q76",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q76. Column Q (\"Length\") of NASA's Data II sheet, row 76. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 32.63,
     "max": 32.63,
     "quality": "reported",
     "raw": "32.63",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.526,
     "max": 0.526,
     "quality": "reported",
     "raw": "0.526",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/73",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 12.21.19",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 73,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 33.57,
     "max": 33.57,
     "quality": "reported",
     "raw": "33.57",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.063,
     "max": 1.063,
     "quality": "reported",
     "raw": "1.063",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/74",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 12.21.19",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 74,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 32.63,
     "max": 32.63,
     "quality": "reported",
     "raw": "32.63",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.505,
     "max": 0.505,
     "quality": "reported",
     "raw": "0.505",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/75",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 12:26:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 75,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 41.3181,
     "max": 41.3181,
     "quality": "reported",
     "raw": "41.3181",
     "column": "Data record of Video and Stills!Q79",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q79. Column Q (\"Length\") of NASA's Data II sheet, row 79. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "26.99",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.601,
     "max": 1.601,
     "quality": "reported",
     "raw": "1.601",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/76",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 12:26:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 76,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "26.99",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.816,
     "max": 0.816,
     "quality": "reported",
     "raw": "0.816",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/77",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 12.26.44",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 77,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "26.99",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.601,
     "max": 1.601,
     "quality": "reported",
     "raw": "1.601",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/78",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 12.26.44",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 78,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "26.99",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.806,
     "max": 0.806,
     "quality": "reported",
     "raw": "0.806",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/79",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 12.28.52",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 79,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 14.77,
     "max": 14.77,
     "quality": "reported",
     "raw": "14.77",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.955,
     "max": 1.955,
     "quality": "reported",
     "raw": "1.955",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/80",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 12.28.52",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 80,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 14.77,
     "max": 14.77,
     "quality": "reported",
     "raw": "14.77",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.967,
     "max": 0.967,
     "quality": "reported",
     "raw": "0.967",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/81",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 12:42:47",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 81,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 80.9616,
     "max": 80.9616,
     "quality": "reported",
     "raw": "80.9616",
     "column": "Data record of Video and Stills!Q85",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q85. Column Q (\"Length\") of NASA's Data II sheet, row 85. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 16.65,
     "max": 16.65,
     "quality": "reported",
     "raw": "16.65",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.782,
     "max": 2.782,
     "quality": "reported",
     "raw": "2.782",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/82",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 12:42:47",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 82,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 36.64219999999999,
     "max": 36.64219999999999,
     "quality": "reported",
     "raw": "36.64219999999999",
     "column": "Data record of Video and Stills!Q86",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q86. Column Q (\"Length\") of NASA's Data II sheet, row 86. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 15.71,
     "max": 15.71,
     "quality": "reported",
     "raw": "15.71",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.343,
     "max": 1.343,
     "quality": "reported",
     "raw": "1.343",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/83",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 12.42.47",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 83,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 16.65,
     "max": 16.65,
     "quality": "reported",
     "raw": "16.65",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.782,
     "max": 2.782,
     "quality": "reported",
     "raw": "2.782",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/84",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 12.42.47",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 84,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 15.71,
     "max": 15.71,
     "quality": "reported",
     "raw": "15.71",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.343,
     "max": 1.343,
     "quality": "reported",
     "raw": "1.343",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/85",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 13:02:02",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 85,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 56.768899999999995,
     "max": 56.768899999999995,
     "quality": "reported",
     "raw": "56.768899999999995",
     "column": "Data record of Video and Stills!Q89",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q89. Column Q (\"Length\") of NASA's Data II sheet, row 89. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 38.27,
     "max": 38.27,
     "quality": "reported",
     "raw": "38.27",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.352,
     "max": 2.352,
     "quality": "reported",
     "raw": "2.352",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/86",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 13:02:02",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 86,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 23.22439999999999,
     "max": 23.22439999999999,
     "quality": "reported",
     "raw": "23.22439999999999",
     "column": "Data record of Video and Stills!Q90",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q90. Column Q (\"Length\") of NASA's Data II sheet, row 90. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 37.33,
     "max": 37.33,
     "quality": "reported",
     "raw": "37.33",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.128,
     "max": 1.128,
     "quality": "reported",
     "raw": "1.128",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/87",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 13.02.02",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 87,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 37.33,
     "max": 37.33,
     "quality": "reported",
     "raw": "37.33",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.342,
     "max": 2.342,
     "quality": "reported",
     "raw": "2.342",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/88",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 13.02.02",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 88,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/89",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 13:04:25",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 89,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 79.5385,
     "max": 79.5385,
     "quality": "reported",
     "raw": "79.5385",
     "column": "Data record of Video and Stills!Q93",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q93. Column Q (\"Length\") of NASA's Data II sheet, row 93. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 66.48,
     "max": 66.48,
     "quality": "reported",
     "raw": "66.48",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 3.33,
     "max": 3.33,
     "quality": "reported",
     "raw": "3.33",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/90",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 13:04:25",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 90,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 31.559699999999992,
     "max": 31.559699999999992,
     "quality": "reported",
     "raw": "31.559699999999992",
     "column": "Data record of Video and Stills!Q94",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q94. Column Q (\"Length\") of NASA's Data II sheet, row 94. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 66.48,
     "max": 66.48,
     "quality": "reported",
     "raw": "66.48",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.665,
     "max": 1.665,
     "quality": "reported",
     "raw": "1.665",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/91",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 13.04.25",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 91,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 66.48,
     "max": 66.48,
     "quality": "reported",
     "raw": "66.48",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 3.33,
     "max": 3.33,
     "quality": "reported",
     "raw": "3.33",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/92",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 13.04.25",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 92,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 66.48,
     "max": 66.48,
     "quality": "reported",
     "raw": "66.48",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "Propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.665,
     "max": 1.665,
     "quality": "reported",
     "raw": "1.665",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/93",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 16:09:00",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 93,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 12.042899999999989,
     "max": 12.042899999999989,
     "quality": "reported",
     "raw": "12.042899999999989",
     "column": "Data record of Video and Stills!Q97",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q97. Column Q (\"Length\") of NASA's Data II sheet, row 97. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 12.89,
     "max": 12.89,
     "quality": "reported",
     "raw": "12.89",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.602,
     "max": 0.602,
     "quality": "reported",
     "raw": "0.602",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/94",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 no ku",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 94,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 12.89,
     "max": 12.89,
     "quality": "reported",
     "raw": "12.89",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/95",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 no ku",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 95,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 12.89,
     "max": 12.89,
     "quality": "reported",
     "raw": "12.89",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.289,
     "max": 0.289,
     "quality": "reported",
     "raw": "0.289",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/96",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 16.14.05",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 96,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 64.6,
     "max": 64.6,
     "quality": "reported",
     "raw": "64.6",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.519,
     "max": 1.519,
     "quality": "reported",
     "raw": "1.519",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/97",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 16.14.05",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 97,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 65.54,
     "max": 65.54,
     "quality": "reported",
     "raw": "65.54",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.778,
     "max": 0.778,
     "quality": "reported",
     "raw": "0.778",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/98",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 16.22.17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 98,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 29.81,
     "max": 29.81,
     "quality": "reported",
     "raw": "29.81",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.866,
     "max": 0.866,
     "quality": "reported",
     "raw": "0.866",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/99",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 16.22.17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 99,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 28.87,
     "max": 28.87,
     "quality": "reported",
     "raw": "28.87",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.991,
     "max": 0.991,
     "quality": "reported",
     "raw": "0.991",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/100",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 16.22.17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 100,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 29.81,
     "max": 29.81,
     "quality": "reported",
     "raw": "29.81",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.414,
     "max": 0.414,
     "quality": "reported",
     "raw": "0.414",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/101",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 Ku LOS",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 101,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/102",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 Ku LOS",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 102,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/103",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 Ku LOS",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 103,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 50.49,
     "max": 50.49,
     "quality": "reported",
     "raw": "50.49",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.644,
     "max": 1.644,
     "quality": "reported",
     "raw": "1.644",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/104",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17:10:12",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 104,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 10.4165,
     "max": 10.4165,
     "quality": "reported",
     "raw": "10.4165",
     "column": "Data record of Video and Stills!Q108",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q108. Column Q (\"Length\") of NASA's Data II sheet, row 108. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 11.95,
     "max": 11.95,
     "quality": "reported",
     "raw": "11.95",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.376,
     "max": 0.376,
     "quality": "reported",
     "raw": "0.376",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/105",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17:10:12",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 105,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 20.78479999999999,
     "max": 20.78479999999999,
     "quality": "reported",
     "raw": "20.78479999999999",
     "column": "Data record of Video and Stills!Q109",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q109. Column Q (\"Length\") of NASA's Data II sheet, row 109. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 11.95,
     "max": 11.95,
     "quality": "reported",
     "raw": "11.95",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.878,
     "max": 0.878,
     "quality": "reported",
     "raw": "0.878",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/106",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17:10:12",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 106,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.95,
     "max": 11.95,
     "quality": "reported",
     "raw": "11.95",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.803,
     "max": 0.803,
     "quality": "reported",
     "raw": "0.803",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/107",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17:10:12",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 107,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.95,
     "max": 11.95,
     "quality": "reported",
     "raw": "11.95",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.389,
     "max": 0.389,
     "quality": "reported",
     "raw": "0.389",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/108",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17:25:47",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 108,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 34.60919999999999,
     "max": 34.60919999999999,
     "quality": "reported",
     "raw": "34.60919999999999",
     "column": "Data record of Video and Stills!Q112",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q112. Column Q (\"Length\") of NASA's Data II sheet, row 112. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 61.78,
     "max": 61.78,
     "quality": "reported",
     "raw": "61.78",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.707,
     "max": 1.707,
     "quality": "reported",
     "raw": "1.707",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/109",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17:25:47",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 109,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 14.8891,
     "max": 14.8891,
     "quality": "reported",
     "raw": "14.8891",
     "column": "Data record of Video and Stills!Q113",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q113. Column Q (\"Length\") of NASA's Data II sheet, row 113. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 60.84,
     "max": 60.84,
     "quality": "reported",
     "raw": "60.84",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.853,
     "max": 0.853,
     "quality": "reported",
     "raw": "0.853",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/110",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17:25:47",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 110,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 39.4884,
     "max": 39.4884,
     "quality": "reported",
     "raw": "39.4884",
     "column": "Data record of Video and Stills!Q114",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q114. Column Q (\"Length\") of NASA's Data II sheet, row 114. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 59.9,
     "max": 59.9,
     "quality": "reported",
     "raw": "59.9",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.857,
     "max": 1.857,
     "quality": "reported",
     "raw": "1.857",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/111",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17.25.49",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 111,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 61.78,
     "max": 61.78,
     "quality": "reported",
     "raw": "61.78",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.719,
     "max": 1.719,
     "quality": "reported",
     "raw": "1.719",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/112",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17.25.49",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 112,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 60.84,
     "max": 60.84,
     "quality": "reported",
     "raw": "60.84",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.853,
     "max": 0.853,
     "quality": "reported",
     "raw": "0.853",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/113",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17.25.49",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 113,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 59.9,
     "max": 59.9,
     "quality": "reported",
     "raw": "59.9",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.857,
     "max": 1.857,
     "quality": "reported",
     "raw": "1.857",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/114",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17:30:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 114,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 24.850799999999992,
     "max": 24.850799999999992,
     "quality": "reported",
     "raw": "24.850799999999992",
     "column": "Data record of Video and Stills!Q118",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q118. Column Q (\"Length\") of NASA's Data II sheet, row 118. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 37.33,
     "max": 37.33,
     "quality": "reported",
     "raw": "37.33",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.18,
     "max": 1.18,
     "quality": "reported",
     "raw": "1.18",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/115",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17:30:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 115,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 12.246199999999988,
     "max": 12.246199999999988,
     "quality": "reported",
     "raw": "12.246199999999988",
     "column": "Data record of Video and Stills!Q119",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q119. Column Q (\"Length\") of NASA's Data II sheet, row 119. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 37.33,
     "max": 37.33,
     "quality": "reported",
     "raw": "37.33",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.577,
     "max": 0.577,
     "quality": "reported",
     "raw": "0.577",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/116",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17:30:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 116,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 36.43889999999999,
     "max": 36.43889999999999,
     "quality": "reported",
     "raw": "36.43889999999999",
     "column": "Data record of Video and Stills!Q120",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q120. Column Q (\"Length\") of NASA's Data II sheet, row 120. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 37.33,
     "max": 37.33,
     "quality": "reported",
     "raw": "37.33",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.606,
     "max": 1.606,
     "quality": "reported",
     "raw": "1.606",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/117",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17.30.18",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 117,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 38.27,
     "max": 38.27,
     "quality": "reported",
     "raw": "38.27",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.18,
     "max": 1.18,
     "quality": "reported",
     "raw": "1.18",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/118",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17.30.18",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 118,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 37.33,
     "max": 37.33,
     "quality": "reported",
     "raw": "37.33",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.565,
     "max": 0.565,
     "quality": "reported",
     "raw": "0.565",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/119",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17.30.18",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 119,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 37.33,
     "max": 37.33,
     "quality": "reported",
     "raw": "37.33",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.606,
     "max": 1.606,
     "quality": "reported",
     "raw": "1.606",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/120",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17:47:11",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 120,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 26.477199999999996,
     "max": 26.477199999999996,
     "quality": "reported",
     "raw": "26.477199999999996",
     "column": "Data record of Video and Stills!Q124",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q124. Column Q (\"Length\") of NASA's Data II sheet, row 124. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 13.83,
     "max": 13.83,
     "quality": "reported",
     "raw": "13.83",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.155,
     "max": 1.155,
     "quality": "reported",
     "raw": "1.155",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/121",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17:47:11",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 121,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 13.669299999999993,
     "max": 13.669299999999993,
     "quality": "reported",
     "raw": "13.669299999999993",
     "column": "Data record of Video and Stills!Q125",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q125. Column Q (\"Length\") of NASA's Data II sheet, row 125. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 13.83,
     "max": 13.83,
     "quality": "reported",
     "raw": "13.83",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.602,
     "max": 0.602,
     "quality": "reported",
     "raw": "0.602",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/122",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17.47.12",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 122,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 13.83,
     "max": 13.83,
     "quality": "reported",
     "raw": "13.83",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.155,
     "max": 1.155,
     "quality": "reported",
     "raw": "1.155",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/123",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17.47.12",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 123,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 13.83,
     "max": 13.83,
     "quality": "reported",
     "raw": "13.83",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/124",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17.47.12",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 124,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 13.83,
     "max": 13.83,
     "quality": "reported",
     "raw": "13.83",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.155,
     "max": 1.155,
     "quality": "reported",
     "raw": "1.155",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/125",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17:50:49",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 125,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 15.295699999999997,
     "max": 15.295699999999997,
     "quality": "reported",
     "raw": "15.295699999999997",
     "column": "Data record of Video and Stills!Q129",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q129. Column Q (\"Length\") of NASA's Data II sheet, row 129. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 41.09,
     "max": 41.09,
     "quality": "reported",
     "raw": "41.09",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.715,
     "max": 0.715,
     "quality": "reported",
     "raw": "0.715",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/126",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17:50:49",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 126,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 7.36699999999999,
     "max": 7.36699999999999,
     "quality": "reported",
     "raw": "7.36699999999999",
     "column": "Data record of Video and Stills!Q130",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q130. Column Q (\"Length\") of NASA's Data II sheet, row 130. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 41.09,
     "max": 41.09,
     "quality": "reported",
     "raw": "41.09",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.339,
     "max": 0.339,
     "quality": "reported",
     "raw": "0.339",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/127",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17.50.49",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 127,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 41.09,
     "max": 41.09,
     "quality": "reported",
     "raw": "41.09",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.69,
     "max": 0.69,
     "quality": "reported",
     "raw": "0.69",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/128",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17.50.49",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 128,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 41.09,
     "max": 41.09,
     "quality": "reported",
     "raw": "41.09",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.715,
     "max": 0.715,
     "quality": "reported",
     "raw": "0.715",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/129",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17.50.49",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 129,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 41.09,
     "max": 41.09,
     "quality": "reported",
     "raw": "41.09",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.339,
     "max": 0.339,
     "quality": "reported",
     "raw": "0.339",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/130",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17.50.49",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 130,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 41.09,
     "max": 41.09,
     "quality": "reported",
     "raw": "41.09",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.715,
     "max": 0.715,
     "quality": "reported",
     "raw": "0.715",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/131",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17.50.49",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 131,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 41.09,
     "max": 41.09,
     "quality": "reported",
     "raw": "41.09",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.715,
     "max": 0.715,
     "quality": "reported",
     "raw": "0.715",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/132",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17:58:09",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 132,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 6.350499999999997,
     "max": 6.350499999999997,
     "quality": "reported",
     "raw": "6.350499999999997",
     "column": "Data record of Video and Stills!Q136",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q136. Column Q (\"Length\") of NASA's Data II sheet, row 136. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 66.48,
     "max": 66.48,
     "quality": "reported",
     "raw": "66.48",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.326,
     "max": 0.326,
     "quality": "reported",
     "raw": "0.326",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/133",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17:58:09",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 133,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 2.284499999999994,
     "max": 2.284499999999994,
     "quality": "reported",
     "raw": "2.284499999999994",
     "column": "Data record of Video and Stills!Q137",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q137. Column Q (\"Length\") of NASA's Data II sheet, row 137. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 66.48,
     "max": 66.48,
     "quality": "reported",
     "raw": "66.48",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.163,
     "max": 0.163,
     "quality": "reported",
     "raw": "0.163",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/134",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17:58:09",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 134,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 5.13069999999999,
     "max": 5.13069999999999,
     "quality": "reported",
     "raw": "5.13069999999999",
     "column": "Data record of Video and Stills!Q138",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q138. Column Q (\"Length\") of NASA's Data II sheet, row 138. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 66.48,
     "max": 66.48,
     "quality": "reported",
     "raw": "66.48",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.276,
     "max": 0.276,
     "quality": "reported",
     "raw": "0.276",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75% Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/135",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17.58.10",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 135,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 67.42,
     "max": 67.42,
     "quality": "reported",
     "raw": "67.42",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.176,
     "max": 0.176,
     "quality": "reported",
     "raw": "0.176",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/136",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17.58.10",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 136,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 66.48,
     "max": 66.48,
     "quality": "reported",
     "raw": "66.48",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.326,
     "max": 0.326,
     "quality": "reported",
     "raw": "0.326",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/137",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17.58.10",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 137,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 66.48,
     "max": 66.48,
     "quality": "reported",
     "raw": "66.48",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.163,
     "max": 0.163,
     "quality": "reported",
     "raw": "0.163",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/138",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17.58.10",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 138,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 85.28,
     "max": 85.28,
     "quality": "reported",
     "raw": "85.28",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.251,
     "max": 0.251,
     "quality": "reported",
     "raw": "0.251",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/139",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17.58.10",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 139,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 66.48,
     "max": 66.48,
     "quality": "reported",
     "raw": "66.48",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.276,
     "max": 0.276,
     "quality": "reported",
     "raw": "0.276",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/140",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 52 17.58.10",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 140,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 66.48,
     "max": 66.48,
     "quality": "reported",
     "raw": "66.48",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.301,
     "max": 0.301,
     "quality": "reported",
     "raw": "0.301",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/141",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 8:56:16",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 141,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 10.07,
     "max": 10.07,
     "quality": "reported",
     "raw": "10.07",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.31,
     "max": 1.31,
     "quality": "reported",
     "raw": "1.31",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/142",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 8:56:16",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 142,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 10.07,
     "max": 10.07,
     "quality": "reported",
     "raw": "10.07",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.648,
     "max": 0.648,
     "quality": "reported",
     "raw": "0.648",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/143",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 8:56:16",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 143,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 10.07,
     "max": 10.07,
     "quality": "reported",
     "raw": "10.07",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.641,
     "max": 1.641,
     "quality": "reported",
     "raw": "1.641",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/144",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 8:56:16",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 144,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 10.07,
     "max": 10.07,
     "quality": "reported",
     "raw": "10.07",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.131,
     "max": 1.131,
     "quality": "reported",
     "raw": "1.131",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/145",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 8:56:16",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 145,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 10.07,
     "max": 10.07,
     "quality": "reported",
     "raw": "10.07",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.31,
     "max": 1.31,
     "quality": "reported",
     "raw": "1.31",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/146",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 8:56:16",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 146,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 10.07,
     "max": 10.07,
     "quality": "reported",
     "raw": "10.07",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.662,
     "max": 0.662,
     "quality": "reported",
     "raw": "0.662",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/147",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 8:56:16",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 147,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 10.07,
     "max": 10.07,
     "quality": "reported",
     "raw": "10.07",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.641,
     "max": 1.641,
     "quality": "reported",
     "raw": "1.641",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/148",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:00:26",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 148,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 57.08,
     "max": 57.08,
     "quality": "reported",
     "raw": "57.08",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.193,
     "max": 2.193,
     "quality": "reported",
     "raw": "2.193",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/149",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:00:26",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 149,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 57.08,
     "max": 57.08,
     "quality": "reported",
     "raw": "57.08",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.034,
     "max": 1.034,
     "quality": "reported",
     "raw": "1.034",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/150",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:00:26",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 150,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 57.08,
     "max": 57.08,
     "quality": "reported",
     "raw": "57.08",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.537,
     "max": 2.537,
     "quality": "reported",
     "raw": "2.537",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/151",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:00:26",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 151,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 57.08,
     "max": 57.08,
     "quality": "reported",
     "raw": "57.08",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.179,
     "max": 2.179,
     "quality": "reported",
     "raw": "2.179",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/152",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:00:26",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 152,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 57.08,
     "max": 57.08,
     "quality": "reported",
     "raw": "57.08",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.034,
     "max": 1.034,
     "quality": "reported",
     "raw": "1.034",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/153",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:00:26",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 153,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 57.08,
     "max": 57.08,
     "quality": "reported",
     "raw": "57.08",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.386,
     "max": 2.386,
     "quality": "reported",
     "raw": "2.386",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/154",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:00:26",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 154,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 57.08,
     "max": 57.08,
     "quality": "reported",
     "raw": "57.08",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.537,
     "max": 2.537,
     "quality": "reported",
     "raw": "2.537",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/155",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:36:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 155,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.05,
     "max": 26.05,
     "quality": "reported",
     "raw": "26.05",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.931,
     "max": 1.931,
     "quality": "reported",
     "raw": "1.931",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/156",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:36:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 156,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.05,
     "max": 26.05,
     "quality": "reported",
     "raw": "26.05",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.965,
     "max": 0.965,
     "quality": "reported",
     "raw": "0.965",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/157",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:36:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 157,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 25.11,
     "max": 25.11,
     "quality": "reported",
     "raw": "25.11",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.124,
     "max": 2.124,
     "quality": "reported",
     "raw": "2.124",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/158",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:36:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 158,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.05,
     "max": 26.05,
     "quality": "reported",
     "raw": "26.05",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.931,
     "max": 1.931,
     "quality": "reported",
     "raw": "1.931",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/159",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:36:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 159,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.05,
     "max": 26.05,
     "quality": "reported",
     "raw": "26.05",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.965,
     "max": 0.965,
     "quality": "reported",
     "raw": "0.965",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/160",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:36:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 160,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 25.11,
     "max": 25.11,
     "quality": "reported",
     "raw": "25.11",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.193,
     "max": 2.193,
     "quality": "reported",
     "raw": "2.193",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/161",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:39:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 161,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 40.15,
     "max": 40.15,
     "quality": "reported",
     "raw": "40.15",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.179,
     "max": 2.179,
     "quality": "reported",
     "raw": "2.179",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/162",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:39:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 162,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 40.15,
     "max": 40.15,
     "quality": "reported",
     "raw": "40.15",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.103,
     "max": 1.103,
     "quality": "reported",
     "raw": "1.103",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/163",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:39:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 163,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 39.21,
     "max": 39.21,
     "quality": "reported",
     "raw": "39.21",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.496,
     "max": 2.496,
     "quality": "reported",
     "raw": "2.496",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/164",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:39:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 164,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 40.15,
     "max": 40.15,
     "quality": "reported",
     "raw": "40.15",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.179,
     "max": 2.179,
     "quality": "reported",
     "raw": "2.179",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/165",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:39:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 165,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 39.21,
     "max": 39.21,
     "quality": "reported",
     "raw": "39.21",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.103,
     "max": 1.103,
     "quality": "reported",
     "raw": "1.103",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/166",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:39:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 166,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 39.21,
     "max": 39.21,
     "quality": "reported",
     "raw": "39.21",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.496,
     "max": 2.496,
     "quality": "reported",
     "raw": "2.496",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/167",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:39:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 167,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 39.21,
     "max": 39.21,
     "quality": "reported",
     "raw": "39.21",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.786,
     "max": 2.786,
     "quality": "reported",
     "raw": "2.786",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/168",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:49:56",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 168,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.95,
     "max": 11.95,
     "quality": "reported",
     "raw": "11.95",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.524,
     "max": 2.524,
     "quality": "reported",
     "raw": "2.524",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/169",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:49:56",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 169,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.01,
     "max": 11.01,
     "quality": "reported",
     "raw": "11.01",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.255,
     "max": 1.255,
     "quality": "reported",
     "raw": "1.255",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/170",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:49:56",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 170,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.01,
     "max": 11.01,
     "quality": "reported",
     "raw": "11.01",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.303,
     "max": 2.303,
     "quality": "reported",
     "raw": "2.303",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/171",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:49:56",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 171,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.95,
     "max": 11.95,
     "quality": "reported",
     "raw": "11.95",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.524,
     "max": 2.524,
     "quality": "reported",
     "raw": "2.524",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/172",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:49:56",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 172,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.01,
     "max": 11.01,
     "quality": "reported",
     "raw": "11.01",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.255,
     "max": 1.255,
     "quality": "reported",
     "raw": "1.255",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/173",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:49:56",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 173,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.01,
     "max": 11.01,
     "quality": "reported",
     "raw": "11.01",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.303,
     "max": 2.303,
     "quality": "reported",
     "raw": "2.303",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/174",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:49:56",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 174,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.01,
     "max": 11.01,
     "quality": "reported",
     "raw": "11.01",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.082,
     "max": 2.082,
     "quality": "reported",
     "raw": "2.082",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/175",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:53:36",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 175,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.05,
     "max": 26.05,
     "quality": "reported",
     "raw": "26.05",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.6,
     "max": 1.6,
     "quality": "reported",
     "raw": "1.6",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/176",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:53:36",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 176,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "26.99",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.786,
     "max": 0.786,
     "quality": "reported",
     "raw": "0.786",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/177",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:53:36",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 177,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "26.99",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.558,
     "max": 1.558,
     "quality": "reported",
     "raw": "1.558",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/178",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:53:36",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 178,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "26.99",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.6,
     "max": 1.6,
     "quality": "reported",
     "raw": "1.6",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/179",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:53:36",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 179,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "26.99",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.814,
     "max": 0.814,
     "quality": "reported",
     "raw": "0.814",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/180",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 9:53:36",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 180,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.05,
     "max": 26.05,
     "quality": "reported",
     "raw": "26.05",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.558,
     "max": 1.558,
     "quality": "reported",
     "raw": "1.558",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/181",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:01:00",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 181,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 42.03,
     "max": 42.03,
     "quality": "reported",
     "raw": "42.03",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.076,
     "max": 1.076,
     "quality": "reported",
     "raw": "1.076",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/182",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:01:00",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 182,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 42.03,
     "max": 42.03,
     "quality": "reported",
     "raw": "42.03",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.552,
     "max": 0.552,
     "quality": "reported",
     "raw": "0.552",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/183",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:01:00",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 183,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 42.03,
     "max": 42.03,
     "quality": "reported",
     "raw": "42.03",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.076,
     "max": 1.076,
     "quality": "reported",
     "raw": "1.076",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/184",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:01:00",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 184,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 42.03,
     "max": 42.03,
     "quality": "reported",
     "raw": "42.03",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.552,
     "max": 0.552,
     "quality": "reported",
     "raw": "0.552",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/185",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:15:39",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 185,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 21.3947,
     "max": 21.3947,
     "quality": "reported",
     "raw": "21.3947",
     "column": "Data record of Video and Stills!Q189",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q189. Column Q (\"Length\") of NASA's Data II sheet, row 189. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 15.71,
     "max": 15.71,
     "quality": "reported",
     "raw": "15.71",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.379,
     "max": 1.379,
     "quality": "reported",
     "raw": "1.379",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/186",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:15:39",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 186,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 25.11,
     "max": 25.11,
     "quality": "reported",
     "raw": "25.11",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.096,
     "max": 2.096,
     "quality": "reported",
     "raw": "2.096",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/187",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:15:39",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 187,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 15.71,
     "max": 15.71,
     "quality": "reported",
     "raw": "15.71",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.365,
     "max": 1.365,
     "quality": "reported",
     "raw": "1.365",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/188",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:15:39",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 188,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 14.77,
     "max": 14.77,
     "quality": "reported",
     "raw": "14.77",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.096,
     "max": 2.096,
     "quality": "reported",
     "raw": "2.096",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/189",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:25:40",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 189,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 22.614499999999992,
     "max": 22.614499999999992,
     "quality": "reported",
     "raw": "22.614499999999992",
     "column": "Data record of Video and Stills!Q193",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q193. Column Q (\"Length\") of NASA's Data II sheet, row 193. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "26.99",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.517,
     "max": 1.517,
     "quality": "reported",
     "raw": "1.517",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/190",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:25:40",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 190,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "26.99",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.531,
     "max": 1.531,
     "quality": "reported",
     "raw": "1.531",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/191",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:25:40",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 191,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "26.99",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.531,
     "max": 1.531,
     "quality": "reported",
     "raw": "1.531",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/192",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:25:40",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 192,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.05,
     "max": 26.05,
     "quality": "reported",
     "raw": "26.05",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.544,
     "max": 1.544,
     "quality": "reported",
     "raw": "1.544",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/193",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:34:07",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 193,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 12.6528,
     "max": 12.6528,
     "quality": "reported",
     "raw": "12.6528",
     "column": "Data record of Video and Stills!Q197",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q197. Column Q (\"Length\") of NASA's Data II sheet, row 197. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 11.01,
     "max": 11.01,
     "quality": "reported",
     "raw": "11.01",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.676,
     "max": 0.676,
     "quality": "reported",
     "raw": "0.676",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/194",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:34:07",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 194,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 12.89,
     "max": 12.89,
     "quality": "reported",
     "raw": "12.89",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.662,
     "max": 0.662,
     "quality": "reported",
     "raw": "0.662",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/195",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:34:07",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 195,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 22.29,
     "max": 22.29,
     "quality": "reported",
     "raw": "22.29",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.676,
     "max": 0.676,
     "quality": "reported",
     "raw": "0.676",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/196",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:34:07",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 196,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 39.21,
     "max": 39.21,
     "quality": "reported",
     "raw": "39.21",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.648,
     "max": 0.648,
     "quality": "reported",
     "raw": "0.648",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/197",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:34:07",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 197,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 45.79,
     "max": 45.79,
     "quality": "reported",
     "raw": "45.79",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.648,
     "max": 0.648,
     "quality": "reported",
     "raw": "0.648",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/198",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:34:07",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 198,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 50.49,
     "max": 50.49,
     "quality": "reported",
     "raw": "50.49",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.662,
     "max": 0.662,
     "quality": "reported",
     "raw": "0.662",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/199",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:34:07",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 199,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.01,
     "max": 11.01,
     "quality": "reported",
     "raw": "11.01",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.662,
     "max": 0.662,
     "quality": "reported",
     "raw": "0.662",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/200",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:34:07",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 200,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 14.77,
     "max": 14.77,
     "quality": "reported",
     "raw": "14.77",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.676,
     "max": 0.676,
     "quality": "reported",
     "raw": "0.676",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/201",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:34:07",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 201,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 23.23,
     "max": 23.23,
     "quality": "reported",
     "raw": "23.23",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.676,
     "max": 0.676,
     "quality": "reported",
     "raw": "0.676",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/202",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:34:07",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 202,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 33.57,
     "max": 33.57,
     "quality": "reported",
     "raw": "33.57",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.662,
     "max": 0.662,
     "quality": "reported",
     "raw": "0.662",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/203",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:34:07",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 203,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 45.79,
     "max": 45.79,
     "quality": "reported",
     "raw": "45.79",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.662,
     "max": 0.662,
     "quality": "reported",
     "raw": "0.662",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/204",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:34:07",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 204,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 50.49,
     "max": 50.49,
     "quality": "reported",
     "raw": "50.49",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.648,
     "max": 0.648,
     "quality": "reported",
     "raw": "0.648",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/205",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:52:20",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 205,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 7.570299999999989,
     "max": 7.570299999999989,
     "quality": "reported",
     "raw": "7.570299999999989",
     "column": "Data record of Video and Stills!Q209",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q209. Column Q (\"Length\") of NASA's Data II sheet, row 209. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 11.01,
     "max": 11.01,
     "quality": "reported",
     "raw": "11.01",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.469,
     "max": 0.469,
     "quality": "reported",
     "raw": "0.469",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/206",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:52:20",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 206,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.01,
     "max": 11.01,
     "quality": "reported",
     "raw": "11.01",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.51,
     "max": 0.51,
     "quality": "reported",
     "raw": "0.51",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/207",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 10:52:20",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 207,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.01,
     "max": 11.01,
     "quality": "reported",
     "raw": "11.01",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.276,
     "max": 0.276,
     "quality": "reported",
     "raw": "0.276",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/208",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 11:12:41",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 208,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 8.790099999999995,
     "max": 8.790099999999995,
     "quality": "reported",
     "raw": "8.790099999999995",
     "column": "Data record of Video and Stills!Q212",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q212. Column Q (\"Length\") of NASA's Data II sheet, row 212. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 10.07,
     "max": 10.07,
     "quality": "reported",
     "raw": "10.07",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.538,
     "max": 0.538,
     "quality": "reported",
     "raw": "0.538",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/209",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 11:12:41",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 209,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.01,
     "max": 11.01,
     "quality": "reported",
     "raw": "11.01",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.276,
     "max": 0.276,
     "quality": "reported",
     "raw": "0.276",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/210",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 11:12:41",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 210,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.01,
     "max": 11.01,
     "quality": "reported",
     "raw": "11.01",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.607,
     "max": 0.607,
     "quality": "reported",
     "raw": "0.607",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/211",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 11:12:41",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 211,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.01,
     "max": 11.01,
     "quality": "reported",
     "raw": "11.01",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.538,
     "max": 0.538,
     "quality": "reported",
     "raw": "0.538",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/212",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 11:12:41",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 212,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.01,
     "max": 11.01,
     "quality": "reported",
     "raw": "11.01",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.262,
     "max": 0.262,
     "quality": "reported",
     "raw": "0.262",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/213",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 55 11:12:41",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 213,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 10.07,
     "max": 10.07,
     "quality": "reported",
     "raw": "10.07",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.607,
     "max": 0.607,
     "quality": "reported",
     "raw": "0.607",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/214",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 9:37:52",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 214,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 9.13,
     "max": 9.13,
     "quality": "reported",
     "raw": "9.13",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.409,
     "max": 0.409,
     "quality": "reported",
     "raw": "0.409",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/215",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 9:37:52",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 215,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 9.13,
     "max": 9.13,
     "quality": "reported",
     "raw": "9.13",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.409,
     "max": 0.409,
     "quality": "reported",
     "raw": "0.409",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/216",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 9:37:52",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 216,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 9.13,
     "max": 9.13,
     "quality": "reported",
     "raw": "9.13",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.292,
     "max": 0.292,
     "quality": "reported",
     "raw": "0.292",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/217",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 9:37:52",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 217,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 9.13,
     "max": 9.13,
     "quality": "reported",
     "raw": "9.13",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.479,
     "max": 0.479,
     "quality": "reported",
     "raw": "0.479",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/218",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 9:44:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 218,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 21.35,
     "max": 21.35,
     "quality": "reported",
     "raw": "21.35",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.537,
     "max": 0.537,
     "quality": "reported",
     "raw": "0.537",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/219",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 9:44:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 219,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 22.29,
     "max": 22.29,
     "quality": "reported",
     "raw": "22.29",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.327,
     "max": 0.327,
     "quality": "reported",
     "raw": "0.327",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/220",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 9:44:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 220,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 22.29,
     "max": 22.29,
     "quality": "reported",
     "raw": "22.29",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.537,
     "max": 0.537,
     "quality": "reported",
     "raw": "0.537",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/221",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 9:44:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 221,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 22.29,
     "max": 22.29,
     "quality": "reported",
     "raw": "22.29",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.327,
     "max": 0.327,
     "quality": "reported",
     "raw": "0.327",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/222",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 9:44:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 222,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 22.29,
     "max": 22.29,
     "quality": "reported",
     "raw": "22.29",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.701,
     "max": 0.701,
     "quality": "reported",
     "raw": "0.701",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/223",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 9:47:05",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 223,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 34.51,
     "max": 34.51,
     "quality": "reported",
     "raw": "34.51",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.782,
     "max": 0.782,
     "quality": "reported",
     "raw": "0.782",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/224",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 9:47:05",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 224,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 33.57,
     "max": 33.57,
     "quality": "reported",
     "raw": "33.57",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/225",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 9:47:05",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 225,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 33.57,
     "max": 33.57,
     "quality": "reported",
     "raw": "33.57",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.712,
     "max": 0.712,
     "quality": "reported",
     "raw": "0.712",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/226",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 9:47:05",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 226,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 33.57,
     "max": 33.57,
     "quality": "reported",
     "raw": "33.57",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.362,
     "max": 0.362,
     "quality": "reported",
     "raw": "0.362",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/227",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 9:47:05",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 227,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 34.51,
     "max": 34.51,
     "quality": "reported",
     "raw": "34.51",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.817,
     "max": 0.817,
     "quality": "reported",
     "raw": "0.817",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/228",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 9:55:18",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 228,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 50.49,
     "max": 50.49,
     "quality": "reported",
     "raw": "50.49",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.946,
     "max": 0.946,
     "quality": "reported",
     "raw": "0.946",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/229",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 9:55:18",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 229,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 50.49,
     "max": 50.49,
     "quality": "reported",
     "raw": "50.49",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.479,
     "max": 0.479,
     "quality": "reported",
     "raw": "0.479",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/230",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 9:55:18",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 230,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 50.49,
     "max": 50.49,
     "quality": "reported",
     "raw": "50.49",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.946,
     "max": 0.946,
     "quality": "reported",
     "raw": "0.946",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/231",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 9:55:18",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 231,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 50.49,
     "max": 50.49,
     "quality": "reported",
     "raw": "50.49",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.479,
     "max": 0.479,
     "quality": "reported",
     "raw": "0.479",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/232",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 9:55:18",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 232,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 50.49,
     "max": 50.49,
     "quality": "reported",
     "raw": "50.49",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.097,
     "max": 1.097,
     "quality": "reported",
     "raw": "1.097",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/233",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 Ku LOS",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 233,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/234",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 Ku LOS",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 234,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/235",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 Ku LOS",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 235,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/236",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 10:13:22",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 236,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 7.24,
     "max": 7.24,
     "quality": "reported",
     "raw": "7.24",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.374,
     "max": 0.374,
     "quality": "reported",
     "raw": "0.374",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/237",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 10:13:22",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 237,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 6.3,
     "max": 6.3,
     "quality": "reported",
     "raw": "6.3",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.234,
     "max": 0.234,
     "quality": "reported",
     "raw": "0.234",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/238",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 10:13:22",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 238,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 6.3,
     "max": 6.3,
     "quality": "reported",
     "raw": "6.3",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.455,
     "max": 0.455,
     "quality": "reported",
     "raw": "0.455",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/239",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 10:18:27",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 239,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/240",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 10:18:27",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 240,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/241",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 10:18:27",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 241,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/242",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 10:36:19",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 242,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 27.93,
     "max": 27.93,
     "quality": "reported",
     "raw": "27.93",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.736,
     "max": 0.736,
     "quality": "reported",
     "raw": "0.736",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/243",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 10:36:19",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 243,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 27.93,
     "max": 27.93,
     "quality": "reported",
     "raw": "27.93",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.362,
     "max": 0.362,
     "quality": "reported",
     "raw": "0.362",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/244",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 10:36:19",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 244,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "26.99",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.806,
     "max": 0.806,
     "quality": "reported",
     "raw": "0.806",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/245",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 10:41:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 245,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 41.09,
     "max": 41.09,
     "quality": "reported",
     "raw": "41.09",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.946,
     "max": 0.946,
     "quality": "reported",
     "raw": "0.946",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/246",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 10:41:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 246,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 40.15,
     "max": 40.15,
     "quality": "reported",
     "raw": "40.15",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.467,
     "max": 0.467,
     "quality": "reported",
     "raw": "0.467",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/247",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 10:41:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 247,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 40.15,
     "max": 40.15,
     "quality": "reported",
     "raw": "40.15",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.027,
     "max": 1.027,
     "quality": "reported",
     "raw": "1.027",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/248",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 11:23:08",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 248,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 4.42,
     "max": 4.42,
     "quality": "reported",
     "raw": "4.42",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.992,
     "max": 0.992,
     "quality": "reported",
     "raw": "0.992",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/249",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 11:23:08",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 249,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 4.42,
     "max": 4.42,
     "quality": "reported",
     "raw": "4.42",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.479,
     "max": 0.479,
     "quality": "reported",
     "raw": "0.479",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/250",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 11:25:49",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 250,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 14.77,
     "max": 14.77,
     "quality": "reported",
     "raw": "14.77",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.319,
     "max": 1.319,
     "quality": "reported",
     "raw": "1.319",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/251",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 11:25:49",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 251,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 19.1584,
     "max": 19.1584,
     "quality": "reported",
     "raw": "19.1584",
     "column": "Data record of Video and Stills!Q255",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q255. Column Q (\"Length\") of NASA's Data II sheet, row 255. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 14.77,
     "max": 14.77,
     "quality": "reported",
     "raw": "14.77",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.654,
     "max": 0.654,
     "quality": "reported",
     "raw": "0.654",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/252",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 11:25:49",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 252,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 14.77,
     "max": 14.77,
     "quality": "reported",
     "raw": "14.77",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.319,
     "max": 1.319,
     "quality": "reported",
     "raw": "1.319",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/253",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 11:25:49",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 253,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 14.77,
     "max": 14.77,
     "quality": "reported",
     "raw": "14.77",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.665,
     "max": 0.665,
     "quality": "reported",
     "raw": "0.665",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/254",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 11:32:00",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 254,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "26.99",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.413,
     "max": 1.413,
     "quality": "reported",
     "raw": "1.413",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/255",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 11:32:00",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 255,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.05,
     "max": 26.05,
     "quality": "reported",
     "raw": "26.05",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.701,
     "max": 0.701,
     "quality": "reported",
     "raw": "0.701",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/256",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 11:34:18",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 256,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 39.21,
     "max": 39.21,
     "quality": "reported",
     "raw": "39.21",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.67,
     "max": 1.67,
     "quality": "reported",
     "raw": "1.67",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/257",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 n/a",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 257,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/258",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 11:42:53",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 258,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 40.15,
     "max": 40.15,
     "quality": "reported",
     "raw": "40.15",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.658,
     "max": 1.658,
     "quality": "reported",
     "raw": "1.658",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/259",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 11:42:53",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 259,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 40.15,
     "max": 40.15,
     "quality": "reported",
     "raw": "40.15",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.817,
     "max": 0.817,
     "quality": "reported",
     "raw": "0.817",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/260",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 11:55:33",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 260,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 41.09,
     "max": 41.09,
     "quality": "reported",
     "raw": "41.09",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.817,
     "max": 0.817,
     "quality": "reported",
     "raw": "0.817",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/261",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 11:55:33",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 261,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 39.21,
     "max": 39.21,
     "quality": "reported",
     "raw": "39.21",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.354,
     "max": 1.354,
     "quality": "reported",
     "raw": "1.354",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/262",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 12:00:46",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 262,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 41.09,
     "max": 41.09,
     "quality": "reported",
     "raw": "41.09",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.366,
     "max": 1.366,
     "quality": "reported",
     "raw": "1.366",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/263",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 Ku LOS",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 263,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/264",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 12:15:41",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 264,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 41.09,
     "max": 41.09,
     "quality": "reported",
     "raw": "41.09",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.354,
     "max": 1.354,
     "quality": "reported",
     "raw": "1.354",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/265",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 12:42:59",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 265,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "26.99",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.362,
     "max": 0.362,
     "quality": "reported",
     "raw": "0.362",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/266",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 12:42:59",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 266,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "26.99",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.362,
     "max": 0.362,
     "quality": "reported",
     "raw": "0.362",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/267",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 12:42:59",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 267,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 10.213199999999986,
     "max": 10.213199999999986,
     "quality": "reported",
     "raw": "10.213199999999986",
     "column": "Data record of Video and Stills!Q271",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q271. Column Q (\"Length\") of NASA's Data II sheet, row 271. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "26.99",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/268",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 58 12:45:46",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 268,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "26.99",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/269",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 119 10:28:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 269,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 13.83,
     "max": 13.83,
     "quality": "reported",
     "raw": "13.83",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.774,
     "max": 0.774,
     "quality": "reported",
     "raw": "0.774",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/270",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 119 10:28:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 270,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 14.77,
     "max": 14.77,
     "quality": "reported",
     "raw": "14.77",
     "column": "Data record of Video and Stills!Q331",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q331. Column Q (\"Length\") of NASA's Data II sheet, row 331. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 12.89,
     "max": 12.89,
     "quality": "reported",
     "raw": "12.89",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.383,
     "max": 0.383,
     "quality": "reported",
     "raw": "0.383",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/271",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 119 10:28:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 271,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 12.89,
     "max": 12.89,
     "quality": "reported",
     "raw": "12.89",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.414,
     "max": 0.414,
     "quality": "reported",
     "raw": "0.414",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/272",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 119 10:28:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 272,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 12.89,
     "max": 12.89,
     "quality": "reported",
     "raw": "12.89",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.461,
     "max": 0.461,
     "quality": "reported",
     "raw": "0.461",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/273",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 119 10:38:34",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 273,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 15.92,
     "max": 15.92,
     "quality": "reported",
     "raw": "15.92",
     "column": "Data record of Video and Stills!Q334",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q334. Column Q (\"Length\") of NASA's Data II sheet, row 334. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "26.99",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.461,
     "max": 0.461,
     "quality": "reported",
     "raw": "0.461",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/274",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 119 10:38:34",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 274,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "26.99",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.618,
     "max": 0.618,
     "quality": "reported",
     "raw": "0.618",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/275",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 119 10:38:34",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 275,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.05,
     "max": 26.05,
     "quality": "reported",
     "raw": "26.05",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.657,
     "max": 0.657,
     "quality": "reported",
     "raw": "0.657",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/276",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 119 10:38:34",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 276,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 25.11,
     "max": 25.11,
     "quality": "reported",
     "raw": "25.11",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.696,
     "max": 0.696,
     "quality": "reported",
     "raw": "0.696",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/277",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 15:52:00",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 277,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 24.17,
     "max": 24.17,
     "quality": "reported",
     "raw": "24.17",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.774,
     "max": 0.774,
     "quality": "reported",
     "raw": "0.774",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/278",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 15:52:00",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 278,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 14.77,
     "max": 14.77,
     "quality": "reported",
     "raw": "14.77",
     "column": "Data record of Video and Stills!Q339",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q339. Column Q (\"Length\") of NASA's Data II sheet, row 339. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 23.23,
     "max": 23.23,
     "quality": "reported",
     "raw": "23.23",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.383,
     "max": 0.383,
     "quality": "reported",
     "raw": "0.383",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/279",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 15:52:00",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 279,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 23.23,
     "max": 23.23,
     "quality": "reported",
     "raw": "23.23",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.492,
     "max": 0.492,
     "quality": "reported",
     "raw": "0.492",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/280",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 15:57:26",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 280,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 14.31,
     "max": 14.31,
     "quality": "reported",
     "raw": "14.31",
     "column": "Data record of Video and Stills!Q341",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q341. Column Q (\"Length\") of NASA's Data II sheet, row 341. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 17.59,
     "max": 17.59,
     "quality": "reported",
     "raw": "17.59",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.383,
     "max": 0.383,
     "quality": "reported",
     "raw": "0.383",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/281",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 15:57:26",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 281,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 6.03,
     "max": 6.03,
     "quality": "reported",
     "raw": "6.03",
     "column": "Data record of Video and Stills!Q342",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q342. Column Q (\"Length\") of NASA's Data II sheet, row 342. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 16.65,
     "max": 16.65,
     "quality": "reported",
     "raw": "16.65",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.117,
     "max": 0.117,
     "quality": "reported",
     "raw": "0.117",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/282",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 15:57:26",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 282,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 10.63,
     "max": 10.63,
     "quality": "reported",
     "raw": "10.63",
     "column": "Data record of Video and Stills!Q343",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q343. Column Q (\"Length\") of NASA's Data II sheet, row 343. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 16.65,
     "max": 16.65,
     "quality": "reported",
     "raw": "16.65",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.242,
     "max": 0.242,
     "quality": "reported",
     "raw": "0.242",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/283",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 15:57:26",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 283,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 13.62,
     "max": 13.62,
     "quality": "reported",
     "raw": "13.62",
     "column": "Data record of Video and Stills!Q344",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q344. Column Q (\"Length\") of NASA's Data II sheet, row 344. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 16.65,
     "max": 16.65,
     "quality": "reported",
     "raw": "16.65",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.352,
     "max": 0.352,
     "quality": "reported",
     "raw": "0.352",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/284",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 15:57:26",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 284,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 16.65,
     "max": 16.65,
     "quality": "reported",
     "raw": "16.65",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.43,
     "max": 0.43,
     "quality": "reported",
     "raw": "0.43",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/285",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 16:33:58",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 285,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 20.41,
     "max": 20.41,
     "quality": "reported",
     "raw": "20.41",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.774,
     "max": 0.774,
     "quality": "reported",
     "raw": "0.774",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/286",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 16:33:58",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 286,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 15.71,
     "max": 15.71,
     "quality": "reported",
     "raw": "15.71",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.821,
     "max": 0.821,
     "quality": "reported",
     "raw": "0.821",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/287",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 16:33:58",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 287,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 15.71,
     "max": 15.71,
     "quality": "reported",
     "raw": "15.71",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.797,
     "max": 0.797,
     "quality": "reported",
     "raw": "0.797",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/288",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 16:33:58",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 288,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 15.71,
     "max": 15.71,
     "quality": "reported",
     "raw": "15.71",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.735,
     "max": 0.735,
     "quality": "reported",
     "raw": "0.735",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/289",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 16:33:58",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 289,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 15.71,
     "max": 15.71,
     "quality": "reported",
     "raw": "15.71",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.703,
     "max": 0.703,
     "quality": "reported",
     "raw": "0.703",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/290",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 16:39:21",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 290,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 22.29,
     "max": 22.29,
     "quality": "reported",
     "raw": "22.29",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.789,
     "max": 0.789,
     "quality": "reported",
     "raw": "0.789",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/291",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 16:39:21",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 291,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 21.35,
     "max": 21.35,
     "quality": "reported",
     "raw": "21.35",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.891,
     "max": 0.891,
     "quality": "reported",
     "raw": "0.891",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/292",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 16:39:21",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 292,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 22.29,
     "max": 22.29,
     "quality": "reported",
     "raw": "22.29",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.86,
     "max": 0.86,
     "quality": "reported",
     "raw": "0.86",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/293",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 16:39:21",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 293,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 22.29,
     "max": 22.29,
     "quality": "reported",
     "raw": "22.29",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.766,
     "max": 0.766,
     "quality": "reported",
     "raw": "0.766",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/294",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 16:39:21",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 294,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 21.35,
     "max": 21.35,
     "quality": "reported",
     "raw": "21.35",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.68,
     "max": 0.68,
     "quality": "reported",
     "raw": "0.68",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/295",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 16:52:19",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 295,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": -0.28,
     "max": -0.28,
     "outside_expected_range": true,
     "quality": "reported",
     "raw": "-0.28",
     "column": "Air Rate (cm/s)",
     "note": "Outside the expected range; kept exactly as published."
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.774,
     "max": 0.774,
     "quality": "reported",
     "raw": "0.774",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/296",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 16:54:20",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 296,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 0.66,
     "max": 0.66,
     "quality": "reported",
     "raw": "0.66",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.743,
     "max": 0.743,
     "quality": "reported",
     "raw": "0.743",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/297",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 16:56:22",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 297,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": -0.28,
     "max": -0.28,
     "outside_expected_range": true,
     "quality": "reported",
     "raw": "-0.28",
     "column": "Air Rate (cm/s)",
     "note": "Outside the expected range; kept exactly as published."
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.813,
     "max": 0.813,
     "quality": "reported",
     "raw": "0.813",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/298",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 16:56:22",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 298,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": -0.28,
     "max": -0.28,
     "outside_expected_range": true,
     "quality": "reported",
     "raw": "-0.28",
     "column": "Air Rate (cm/s)",
     "note": "Outside the expected range; kept exactly as published."
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.985,
     "max": 0.985,
     "quality": "reported",
     "raw": "0.985",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/299",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 16:56:22",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 299,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": -0.28,
     "max": -0.28,
     "outside_expected_range": true,
     "quality": "reported",
     "raw": "-0.28",
     "column": "Air Rate (cm/s)",
     "note": "Outside the expected range; kept exactly as published."
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.93,
     "max": 0.93,
     "quality": "reported",
     "raw": "0.93",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/300",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 16:56:22",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 300,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": -0.28,
     "max": -0.28,
     "outside_expected_range": true,
     "quality": "reported",
     "raw": "-0.28",
     "column": "Air Rate (cm/s)",
     "note": "Outside the expected range; kept exactly as published."
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.86,
     "max": 0.86,
     "quality": "reported",
     "raw": "0.86",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/301",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 17:21:33",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 301,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 10.86,
     "max": 10.86,
     "quality": "reported",
     "raw": "10.86",
     "column": "Data record of Video and Stills!Q362",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q362. Column Q (\"Length\") of NASA's Data II sheet, row 362. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 14.77,
     "max": 14.77,
     "quality": "reported",
     "raw": "14.77",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.195,
     "max": 0.195,
     "quality": "reported",
     "raw": "0.195",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/302",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 17:21:33",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 302,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 13.62,
     "max": 13.62,
     "quality": "reported",
     "raw": "13.62",
     "column": "Data record of Video and Stills!Q363",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q363. Column Q (\"Length\") of NASA's Data II sheet, row 363. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 14.77,
     "max": 14.77,
     "quality": "reported",
     "raw": "14.77",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.313,
     "max": 0.313,
     "quality": "reported",
     "raw": "0.313",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/303",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 17:21:33",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 303,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flame_length_mm": {
     "min": 18.91,
     "max": 18.91,
     "quality": "reported",
     "raw": "18.91",
     "column": "Data record of Video and Stills!Q364",
     "note": "From NASA's file PSI-107_Raw Data_Spice Flight Test Data II modified.xls, Data record of Video and Stills!Q364. Column Q (\"Length\") of NASA's Data II sheet, row 364. Joined to this test by day, ignition, fuel, nozzle, fuel rate and air speed."
    },
    "flow_speed_cm_s": {
     "min": 13.83,
     "max": 13.83,
     "quality": "reported",
     "raw": "13.83",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.43,
     "max": 0.43,
     "quality": "reported",
     "raw": "0.43",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/304",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 136 17:21:33",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 304,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 13.83,
     "max": 13.83,
     "quality": "reported",
     "raw": "13.83",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.539,
     "max": 0.539,
     "quality": "reported",
     "raw": "0.539",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/305",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 9:20:12",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 305,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 13.83,
     "max": 13.83,
     "quality": "reported",
     "raw": "13.83",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.117,
     "max": 1.117,
     "quality": "reported",
     "raw": "1.117",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/306",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 9:20:12",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 306,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 12.89,
     "max": 12.89,
     "quality": "reported",
     "raw": "12.89",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.324,
     "max": 1.324,
     "quality": "reported",
     "raw": "1.324",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/307",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 9:20:12",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 307,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 12.89,
     "max": 12.89,
     "quality": "reported",
     "raw": "12.89",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.586,
     "max": 1.586,
     "quality": "reported",
     "raw": "1.586",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/308",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 9:31:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 308,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.05,
     "max": 26.05,
     "quality": "reported",
     "raw": "26.05",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.724,
     "max": 1.724,
     "quality": "reported",
     "raw": "1.724",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/309",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 9:31:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 309,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.05,
     "max": 26.05,
     "quality": "reported",
     "raw": "26.05",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.931,
     "max": 1.931,
     "quality": "reported",
     "raw": "1.931",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/310",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 9:31:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 310,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.05,
     "max": 26.05,
     "quality": "reported",
     "raw": "26.05",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.137,
     "max": 2.137,
     "quality": "reported",
     "raw": "2.137",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/311",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 9:39:28",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 311,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 41.09,
     "max": 41.09,
     "quality": "reported",
     "raw": "41.09",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.468,
     "max": 2.468,
     "quality": "reported",
     "raw": "2.468",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/312",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 9:39:28",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 312,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 40.15,
     "max": 40.15,
     "quality": "reported",
     "raw": "40.15",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.675,
     "max": 2.675,
     "quality": "reported",
     "raw": "2.675",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/313",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 9:39:28",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 313,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 40.15,
     "max": 40.15,
     "quality": "reported",
     "raw": "40.15",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.882,
     "max": 2.882,
     "quality": "reported",
     "raw": "2.882",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/314",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 9:44:52",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 314,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 48.61,
     "max": 48.61,
     "quality": "reported",
     "raw": "48.61",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 3.227,
     "max": 3.227,
     "quality": "reported",
     "raw": "3.227",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/315",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 9:44:52",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 315,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 47.67,
     "max": 47.67,
     "quality": "reported",
     "raw": "47.67",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.689,
     "max": 2.689,
     "quality": "reported",
     "raw": "2.689",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/316",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 9:44:52",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 316,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 47.67,
     "max": 47.67,
     "quality": "reported",
     "raw": "47.67",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 3.723,
     "max": 3.723,
     "quality": "reported",
     "raw": "3.723",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/317",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 9:59:46",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 317,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 39.21,
     "max": 39.21,
     "quality": "reported",
     "raw": "39.21",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.02,
     "max": 1.02,
     "quality": "reported",
     "raw": "1.02",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/318",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 9:59:46",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 318,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 40.15,
     "max": 40.15,
     "quality": "reported",
     "raw": "40.15",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.296,
     "max": 1.296,
     "quality": "reported",
     "raw": "1.296",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/319",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 9:59:46",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 319,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 40.15,
     "max": 40.15,
     "quality": "reported",
     "raw": "40.15",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.572,
     "max": 1.572,
     "quality": "reported",
     "raw": "1.572",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/320",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 9:59:46",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 320,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 39.21,
     "max": 39.21,
     "quality": "reported",
     "raw": "39.21",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.848,
     "max": 1.848,
     "quality": "reported",
     "raw": "1.848",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/321",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 9:59:46",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 321,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 40.15,
     "max": 40.15,
     "quality": "reported",
     "raw": "40.15",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.124,
     "max": 2.124,
     "quality": "reported",
     "raw": "2.124",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/322",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 9:59:46",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 322,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 40.15,
     "max": 40.15,
     "quality": "reported",
     "raw": "40.15",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.399,
     "max": 2.399,
     "quality": "reported",
     "raw": "2.399",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/323",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 9:59:46",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 323,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 39.21,
     "max": 39.21,
     "quality": "reported",
     "raw": "39.21",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.675,
     "max": 2.675,
     "quality": "reported",
     "raw": "2.675",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/324",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 9:59:46",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 324,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 40.15,
     "max": 40.15,
     "quality": "reported",
     "raw": "40.15",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.951,
     "max": 2.951,
     "quality": "reported",
     "raw": "2.951",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/325",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 10:06:06",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 325,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 12.89,
     "max": 12.89,
     "quality": "reported",
     "raw": "12.89",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.931,
     "max": 1.931,
     "quality": "reported",
     "raw": "1.931",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/326",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 10:12:03",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 326,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 66.48,
     "max": 66.48,
     "quality": "reported",
     "raw": "66.48",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.917,
     "max": 1.917,
     "quality": "reported",
     "raw": "1.917",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/327",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 10:12:03",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 327,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 25.11,
     "max": 25.11,
     "quality": "reported",
     "raw": "25.11",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.931,
     "max": 1.931,
     "quality": "reported",
     "raw": "1.931",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/328",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 11:04:59",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 328,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.95,
     "max": 11.95,
     "quality": "reported",
     "raw": "11.95",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.579,
     "max": 0.579,
     "quality": "reported",
     "raw": "0.579",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/329",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 11:04:59",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 329,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.95,
     "max": 11.95,
     "quality": "reported",
     "raw": "11.95",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.538,
     "max": 0.538,
     "quality": "reported",
     "raw": "0.538",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/330",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 11:04:59",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 330,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 13.83,
     "max": 13.83,
     "quality": "reported",
     "raw": "13.83",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.538,
     "max": 0.538,
     "quality": "reported",
     "raw": "0.538",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/331",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 11:04:59",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 331,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 18.53,
     "max": 18.53,
     "quality": "reported",
     "raw": "18.53",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.538,
     "max": 0.538,
     "quality": "reported",
     "raw": "0.538",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/332",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 11:04:59",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 332,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 22.29,
     "max": 22.29,
     "quality": "reported",
     "raw": "22.29",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.538,
     "max": 0.538,
     "quality": "reported",
     "raw": "0.538",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/333",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 11:04:59",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 333,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 24.17,
     "max": 24.17,
     "quality": "reported",
     "raw": "24.17",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.538,
     "max": 0.538,
     "quality": "reported",
     "raw": "0.538",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/334",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 11:04:59",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 334,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 16.65,
     "max": 16.65,
     "quality": "reported",
     "raw": "16.65",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.538,
     "max": 0.538,
     "quality": "reported",
     "raw": "0.538",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/335",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 11:04:59",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 335,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.95,
     "max": 11.95,
     "quality": "reported",
     "raw": "11.95",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.538,
     "max": 0.538,
     "quality": "reported",
     "raw": "0.538",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/336",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 LOS",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 336,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": -5.92,
     "max": -5.92,
     "outside_expected_range": true,
     "quality": "reported",
     "raw": "-5.92",
     "column": "Air Rate (cm/s)",
     "note": "Outside the expected range; kept exactly as published."
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.69,
     "max": 0.69,
     "quality": "reported",
     "raw": "0.69",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/337",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 LOS",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 337,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": -5.92,
     "max": -5.92,
     "outside_expected_range": true,
     "quality": "reported",
     "raw": "-5.92",
     "column": "Air Rate (cm/s)",
     "note": "Outside the expected range; kept exactly as published."
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.621,
     "max": 0.621,
     "quality": "reported",
     "raw": "0.621",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/338",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 167 LOS",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 338,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": -5.92,
     "max": -5.92,
     "outside_expected_range": true,
     "quality": "reported",
     "raw": "-5.92",
     "column": "Air Rate (cm/s)",
     "note": "Outside the expected range; kept exactly as published."
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.552,
     "max": 0.552,
     "quality": "reported",
     "raw": "0.552",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/339",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 168 8:50:41",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 339,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.01,
     "max": 11.01,
     "quality": "reported",
     "raw": "11.01",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.676,
     "max": 0.676,
     "quality": "reported",
     "raw": "0.676",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/340",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 168 8:50:41",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 340,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.01,
     "max": 11.01,
     "quality": "reported",
     "raw": "11.01",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.621,
     "max": 0.621,
     "quality": "reported",
     "raw": "0.621",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/341",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 168 8:50:41",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 341,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 10.07,
     "max": 10.07,
     "quality": "reported",
     "raw": "10.07",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.593,
     "max": 0.593,
     "quality": "reported",
     "raw": "0.593",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/342",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 168 9:03:26",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 342,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 37.33,
     "max": 37.33,
     "quality": "reported",
     "raw": "37.33",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.351,
     "max": 1.351,
     "quality": "reported",
     "raw": "1.351",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/343",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 168 9:49:13",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 343,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 36.39,
     "max": 36.39,
     "quality": "reported",
     "raw": "36.39",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.72,
     "max": 1.72,
     "quality": "reported",
     "raw": "1.72",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/344",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 168 9:49:13",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 344,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 36.39,
     "max": 36.39,
     "quality": "reported",
     "raw": "36.39",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.062,
     "max": 2.062,
     "quality": "reported",
     "raw": "2.062",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/345",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 168 9:49:13",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 345,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 35.45,
     "max": 35.45,
     "quality": "reported",
     "raw": "35.45",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.403,
     "max": 2.403,
     "quality": "reported",
     "raw": "2.403",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/346",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 168 9:52:25",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 346,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 38.27,
     "max": 38.27,
     "quality": "reported",
     "raw": "38.27",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.094,
     "max": 1.094,
     "quality": "reported",
     "raw": "1.094",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/347",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 168 9:56:09",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 347,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 55.2,
     "max": 55.2,
     "quality": "reported",
     "raw": "55.2",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "Ethylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.631,
     "max": 2.631,
     "quality": "reported",
     "raw": "2.631",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/348",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 168 10:42:48",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 348,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 27.93,
     "max": 27.93,
     "quality": "reported",
     "raw": "27.93",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "Methane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.555,
     "max": 0.555,
     "quality": "reported",
     "raw": "0.555",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/349",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 168 11:16:48",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 349,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 32.63,
     "max": 32.63,
     "quality": "reported",
     "raw": "32.63",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "Methane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.446,
     "max": 0.446,
     "quality": "reported",
     "raw": "0.446",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/350",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 168 11:30:21",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 350,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 50.49,
     "max": 50.49,
     "quality": "reported",
     "raw": "50.49",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "Methane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.141,
     "max": 1.141,
     "quality": "reported",
     "raw": "1.141",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/351",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 168 11:41:18",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 351,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 55.2,
     "max": 55.2,
     "quality": "reported",
     "raw": "55.2",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "Methane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.375,
     "max": 0.375,
     "quality": "reported",
     "raw": "0.375",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/352",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 10:37:43",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 352,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 61.78,
     "max": 61.78,
     "quality": "reported",
     "raw": "61.78",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.682,
     "max": 1.682,
     "quality": "reported",
     "raw": "1.682",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/353",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 10:37:43",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 353,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 58.96,
     "max": 58.96,
     "quality": "reported",
     "raw": "58.96",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.87,
     "max": 1.87,
     "quality": "reported",
     "raw": "1.87",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/354",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 10:41:34",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 354,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 51.43,
     "max": 51.43,
     "quality": "reported",
     "raw": "51.43",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.188,
     "max": 0.188,
     "quality": "reported",
     "raw": "0.188",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/355",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 10:41:34",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 355,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.376,
     "max": 0.376,
     "quality": "reported",
     "raw": "0.376",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/356",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 10:41:34",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 356,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.565,
     "max": 0.565,
     "quality": "reported",
     "raw": "0.565",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/357",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 10:41:34",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 357,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.753,
     "max": 0.753,
     "quality": "reported",
     "raw": "0.753",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/358",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 10:41:34",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 358,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.941,
     "max": 0.941,
     "quality": "reported",
     "raw": "0.941",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/359",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 10:41:34",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 359,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.129,
     "max": 1.129,
     "quality": "reported",
     "raw": "1.129",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/360",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 10:41:34",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 360,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.318,
     "max": 1.318,
     "quality": "reported",
     "raw": "1.318",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/361",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 10:41:34",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 361,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.506,
     "max": 1.506,
     "quality": "reported",
     "raw": "1.506",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/362",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 10:41:34",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 362,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 50.49,
     "max": 50.49,
     "quality": "reported",
     "raw": "50.49",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.694,
     "max": 1.694,
     "quality": "reported",
     "raw": "1.694",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/363",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 11:08:12",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 363,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 58.96,
     "max": 58.96,
     "quality": "reported",
     "raw": "58.96",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.318,
     "max": 1.318,
     "quality": "reported",
     "raw": "1.318",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/364",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 11:08:12",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 364,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 55.2,
     "max": 55.2,
     "quality": "reported",
     "raw": "55.2",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.33,
     "max": 1.33,
     "quality": "reported",
     "raw": "1.33",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/365",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 11:08:12",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 365,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 47.67,
     "max": 47.67,
     "quality": "reported",
     "raw": "47.67",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.318,
     "max": 1.318,
     "quality": "reported",
     "raw": "1.318",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/366",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 11:08:12",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 366,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 42.03,
     "max": 42.03,
     "quality": "reported",
     "raw": "42.03",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.305,
     "max": 1.305,
     "quality": "reported",
     "raw": "1.305",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/367",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 11:08:12",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 367,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 36.39,
     "max": 36.39,
     "quality": "reported",
     "raw": "36.39",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.318,
     "max": 1.318,
     "quality": "reported",
     "raw": "1.318",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/368",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 11:21:38",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 368,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.01,
     "max": 11.01,
     "quality": "reported",
     "raw": "11.01",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.489,
     "max": 0.489,
     "quality": "reported",
     "raw": "0.489",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/369",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 11:21:38",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 369,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 23.23,
     "max": 23.23,
     "quality": "reported",
     "raw": "23.23",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.502,
     "max": 0.502,
     "quality": "reported",
     "raw": "0.502",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/370",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 11:21:38",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 370,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 35.45,
     "max": 35.45,
     "quality": "reported",
     "raw": "35.45",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.489,
     "max": 0.489,
     "quality": "reported",
     "raw": "0.489",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/371",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 11:21:38",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 371,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 50.49,
     "max": 50.49,
     "quality": "reported",
     "raw": "50.49",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.502,
     "max": 0.502,
     "quality": "reported",
     "raw": "0.502",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/372",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 11:21:38",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 372,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 54.26,
     "max": 54.26,
     "quality": "reported",
     "raw": "54.26",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.489,
     "max": 0.489,
     "quality": "reported",
     "raw": "0.489",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/373",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 11:21:38",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 373,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 58.02,
     "max": 58.02,
     "quality": "reported",
     "raw": "58.02",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.489,
     "max": 0.489,
     "quality": "reported",
     "raw": "0.489",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/374",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 11:21:38",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 374,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 56.14,
     "max": 56.14,
     "quality": "reported",
     "raw": "56.14",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.489,
     "max": 0.489,
     "quality": "reported",
     "raw": "0.489",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/375",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 11:48:23",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 375,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 12.89,
     "max": 12.89,
     "quality": "reported",
     "raw": "12.89",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.619,
     "max": 1.619,
     "quality": "reported",
     "raw": "1.619",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/376",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 11:48:23",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 376,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 12.89,
     "max": 12.89,
     "quality": "reported",
     "raw": "12.89",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.443,
     "max": 1.443,
     "quality": "reported",
     "raw": "1.443",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/377",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 11:48:23",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 377,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 12.89,
     "max": 12.89,
     "quality": "reported",
     "raw": "12.89",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.355,
     "max": 1.355,
     "quality": "reported",
     "raw": "1.355",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/378",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 11:48:23",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 378,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 12.89,
     "max": 12.89,
     "quality": "reported",
     "raw": "12.89",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.28,
     "max": 1.28,
     "quality": "reported",
     "raw": "1.28",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/379",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 11:48:23",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 379,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 12.89,
     "max": 12.89,
     "quality": "reported",
     "raw": "12.89",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.217,
     "max": 1.217,
     "quality": "reported",
     "raw": "1.217",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/380",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:00:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 380,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 28.87,
     "max": 28.87,
     "quality": "reported",
     "raw": "28.87",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.217,
     "max": 1.217,
     "quality": "reported",
     "raw": "1.217",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/381",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:00:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 381,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 27.93,
     "max": 27.93,
     "quality": "reported",
     "raw": "27.93",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.117,
     "max": 1.117,
     "quality": "reported",
     "raw": "1.117",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/382",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:00:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 382,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 27.93,
     "max": 27.93,
     "quality": "reported",
     "raw": "27.93",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.067,
     "max": 1.067,
     "quality": "reported",
     "raw": "1.067",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/383",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:00:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 383,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 27.93,
     "max": 27.93,
     "quality": "reported",
     "raw": "27.93",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.004,
     "max": 1.004,
     "quality": "reported",
     "raw": "1.004",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/384",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:00:14",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 384,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "26.99",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.941,
     "max": 0.941,
     "quality": "reported",
     "raw": "0.941",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/385",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:11:46",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 385,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 39.21,
     "max": 39.21,
     "quality": "reported",
     "raw": "39.21",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.004,
     "max": 1.004,
     "quality": "reported",
     "raw": "1.004",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/386",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:11:46",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 386,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 39.21,
     "max": 39.21,
     "quality": "reported",
     "raw": "39.21",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.941,
     "max": 0.941,
     "quality": "reported",
     "raw": "0.941",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/387",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:11:46",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 387,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 39.21,
     "max": 39.21,
     "quality": "reported",
     "raw": "39.21",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.878,
     "max": 0.878,
     "quality": "reported",
     "raw": "0.878",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/388",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:11:46",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 388,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 39.21,
     "max": 39.21,
     "quality": "reported",
     "raw": "39.21",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.816,
     "max": 0.816,
     "quality": "reported",
     "raw": "0.816",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/389",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:11:46",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 389,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 38.27,
     "max": 38.27,
     "quality": "reported",
     "raw": "38.27",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.067,
     "max": 1.067,
     "quality": "reported",
     "raw": "1.067",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/390",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:11:46",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 390,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 38.27,
     "max": 38.27,
     "quality": "reported",
     "raw": "38.27",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.129,
     "max": 1.129,
     "quality": "reported",
     "raw": "1.129",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/391",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:11:46",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 391,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 38.27,
     "max": 38.27,
     "quality": "reported",
     "raw": "38.27",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.167,
     "max": 1.167,
     "quality": "reported",
     "raw": "1.167",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/392",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:23:30",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 392,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 60.84,
     "max": 60.84,
     "quality": "reported",
     "raw": "60.84",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.615,
     "max": 0.615,
     "quality": "reported",
     "raw": "0.615",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/393",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:23:30",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 393,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 60.84,
     "max": 60.84,
     "quality": "reported",
     "raw": "60.84",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/394",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:23:30",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 394,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 60.84,
     "max": 60.84,
     "quality": "reported",
     "raw": "60.84",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.565,
     "max": 0.565,
     "quality": "reported",
     "raw": "0.565",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/395",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:23:30",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 395,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 60.84,
     "max": 60.84,
     "quality": "reported",
     "raw": "60.84",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.54,
     "max": 0.54,
     "quality": "reported",
     "raw": "0.54",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/396",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:23:30",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 396,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 59.9,
     "max": 59.9,
     "quality": "reported",
     "raw": "59.9",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.489,
     "max": 0.489,
     "quality": "reported",
     "raw": "0.489",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/397",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:23:30",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 397,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 60.84,
     "max": 60.84,
     "quality": "reported",
     "raw": "60.84",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.452,
     "max": 0.452,
     "quality": "reported",
     "raw": "0.452",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/398",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:39:29",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 398,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 39.21,
     "max": 39.21,
     "quality": "reported",
     "raw": "39.21",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.707,
     "max": 1.707,
     "quality": "reported",
     "raw": "1.707",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/399",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:39:29",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 399,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 39.21,
     "max": 39.21,
     "quality": "reported",
     "raw": "39.21",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.832,
     "max": 1.832,
     "quality": "reported",
     "raw": "1.832",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/400",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:39:29",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 400,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 38.27,
     "max": 38.27,
     "quality": "reported",
     "raw": "38.27",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.958,
     "max": 1.958,
     "quality": "reported",
     "raw": "1.958",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    },
    "smoke_point_length_mm": {
     "min": 43.976158,
     "max": 43.976158,
     "quality": "reported",
     "raw": "0.043976158193208686",
     "column": "Smoke Point Datasheet (2)!AL30",
     "note": "From NASA's file PSI-107_Raw Data_SmokePointReview-0g-3.xlsx, Smoke Point Datasheet (2)!AL30. Cell AL30, column \"Length\" in m, times 1000 gives mm. The same value is in P30 (mm, a formula: pixel count from the video times NASA's calibration) and in S30 of the first sheet (\"smk pt mm\"). Test point 75P7-4."
    }
   }
  },
  {
   "id": "PSI-107/spice/401",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 173 12:39:29",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 401,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 38.27,
     "max": 38.27,
     "quality": "reported",
     "raw": "38.27",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.008,
     "max": 2.008,
     "quality": "reported",
     "raw": "2.008",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/402",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 10:02:10",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 402,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 28.87,
     "max": 28.87,
     "quality": "reported",
     "raw": "28.87",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "75 % Propylene",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/403",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 10:33:23",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 403,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 20.41,
     "max": 20.41,
     "quality": "reported",
     "raw": "20.41",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/404",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 10:33:23",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 404,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 20.41,
     "max": 20.41,
     "quality": "reported",
     "raw": "20.41",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.525,
     "max": 0.525,
     "quality": "reported",
     "raw": "0.525",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/405",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 10:45:25",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 405,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 20.41,
     "max": 20.41,
     "quality": "reported",
     "raw": "20.41",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/406",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 10:45:25",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 406,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 20.41,
     "max": 20.41,
     "quality": "reported",
     "raw": "20.41",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.525,
     "max": 0.525,
     "quality": "reported",
     "raw": "0.525",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/407",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 10:45:25",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 407,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 20.41,
     "max": 20.41,
     "quality": "reported",
     "raw": "20.41",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.584,
     "max": 0.584,
     "quality": "reported",
     "raw": "0.584",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/408",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 10:48:31",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 408,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 10.07,
     "max": 10.07,
     "quality": "reported",
     "raw": "10.07",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.304,
     "max": 0.304,
     "quality": "reported",
     "raw": "0.304",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/409",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 10:48:31",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 409,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 10.07,
     "max": 10.07,
     "quality": "reported",
     "raw": "10.07",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.397,
     "max": 0.397,
     "quality": "reported",
     "raw": "0.397",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/410",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:04:43",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 410,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 29.81,
     "max": 29.81,
     "quality": "reported",
     "raw": "29.81",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/411",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:04:43",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 411,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 29.81,
     "max": 29.81,
     "quality": "reported",
     "raw": "29.81",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.665,
     "max": 0.665,
     "quality": "reported",
     "raw": "0.665",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/412",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:04:43",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 412,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 29.81,
     "max": 29.81,
     "quality": "reported",
     "raw": "29.81",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.701,
     "max": 0.701,
     "quality": "reported",
     "raw": "0.701",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    },
    "smoke_point_length_mm": {
     "min": 17.556739,
     "max": 17.556739,
     "quality": "reported",
     "raw": "0.017556739052934204",
     "column": "Smoke Point Datasheet (2)!AL44",
     "note": "From NASA's file PSI-107_Raw Data_SmokePointReview-0g-3.xlsx, Smoke Point Datasheet (2)!AL44. Cell AL44, column \"Length\" in m, times 1000 gives mm. The same value is in P44 (mm, a formula: pixel count from the video times NASA's calibration) and in S44 of the first sheet (\"smk pt mm\"). Test point P16-7."
    }
   }
  },
  {
   "id": "PSI-107/spice/413",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:13:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 413,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 58.02,
     "max": 58.02,
     "quality": "reported",
     "raw": "58.02",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.109,
     "max": 1.109,
     "quality": "reported",
     "raw": "1.109",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/414",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:13:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 414,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 56.14,
     "max": 56.14,
     "quality": "reported",
     "raw": "56.14",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.992,
     "max": 0.992,
     "quality": "reported",
     "raw": "0.992",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/415",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:13:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 415,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 56.14,
     "max": 56.14,
     "quality": "reported",
     "raw": "56.14",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.109,
     "max": 1.109,
     "quality": "reported",
     "raw": "1.109",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/416",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:20:47",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 416,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 47.67,
     "max": 47.67,
     "quality": "reported",
     "raw": "47.67",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.175,
     "max": 0.175,
     "quality": "reported",
     "raw": "0.175",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/417",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:20:47",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 417,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 47.67,
     "max": 47.67,
     "quality": "reported",
     "raw": "47.67",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/418",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:20:47",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 418,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 47.67,
     "max": 47.67,
     "quality": "reported",
     "raw": "47.67",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.525,
     "max": 0.525,
     "quality": "reported",
     "raw": "0.525",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/419",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:20:47",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 419,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 46.73,
     "max": 46.73,
     "quality": "reported",
     "raw": "46.73",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.701,
     "max": 0.701,
     "quality": "reported",
     "raw": "0.701",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/420",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:20:47",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 420,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 46.73,
     "max": 46.73,
     "quality": "reported",
     "raw": "46.73",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.876,
     "max": 0.876,
     "quality": "reported",
     "raw": "0.876",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/421",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:20:47",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 421,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 46.73,
     "max": 46.73,
     "quality": "reported",
     "raw": "46.73",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.062,
     "max": 1.062,
     "quality": "reported",
     "raw": "1.062",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/422",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:24:30",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 422,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 57.08,
     "max": 57.08,
     "quality": "reported",
     "raw": "57.08",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.759,
     "max": 0.759,
     "quality": "reported",
     "raw": "0.759",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/423",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:24:30",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 423,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 53.32,
     "max": 53.32,
     "quality": "reported",
     "raw": "53.32",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.759,
     "max": 0.759,
     "quality": "reported",
     "raw": "0.759",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/424",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:24:30",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 424,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 45.79,
     "max": 45.79,
     "quality": "reported",
     "raw": "45.79",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.759,
     "max": 0.759,
     "quality": "reported",
     "raw": "0.759",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/425",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:24:30",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 425,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 34.51,
     "max": 34.51,
     "quality": "reported",
     "raw": "34.51",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.759,
     "max": 0.759,
     "quality": "reported",
     "raw": "0.759",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 1.6002,
     "max": 1.6002,
     "quality": "reported",
     "raw": "1.6002",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/426",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:34:16",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 426,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 24.17,
     "max": 24.17,
     "quality": "reported",
     "raw": "24.17",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.354,
     "max": 1.354,
     "quality": "reported",
     "raw": "1.354",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/427",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:34:16",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 427,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 23.23,
     "max": 23.23,
     "quality": "reported",
     "raw": "23.23",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.529,
     "max": 1.529,
     "quality": "reported",
     "raw": "1.529",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/428",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:34:16",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 428,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 23.23,
     "max": 23.23,
     "quality": "reported",
     "raw": "23.23",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.646,
     "max": 1.646,
     "quality": "reported",
     "raw": "1.646",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/429",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:34:16",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 429,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 23.23,
     "max": 23.23,
     "quality": "reported",
     "raw": "23.23",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.693,
     "max": 1.693,
     "quality": "reported",
     "raw": "1.693",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/430",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:34:16",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 430,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 23.23,
     "max": 23.23,
     "quality": "reported",
     "raw": "23.23",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.751,
     "max": 1.751,
     "quality": "reported",
     "raw": "1.751",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/431",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:38:05",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 431,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 12.89,
     "max": 12.89,
     "quality": "reported",
     "raw": "12.89",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.179,
     "max": 1.179,
     "quality": "reported",
     "raw": "1.179",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/432",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:38:05",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 432,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 12.89,
     "max": 12.89,
     "quality": "reported",
     "raw": "12.89",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.354,
     "max": 1.354,
     "quality": "reported",
     "raw": "1.354",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/433",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:38:05",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 433,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.95,
     "max": 11.95,
     "quality": "reported",
     "raw": "11.95",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.459,
     "max": 1.459,
     "quality": "reported",
     "raw": "1.459",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/434",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:38:05",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 434,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.95,
     "max": 11.95,
     "quality": "reported",
     "raw": "11.95",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.553,
     "max": 1.553,
     "quality": "reported",
     "raw": "1.553",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/435",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:46:06",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 435,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.01,
     "max": 11.01,
     "quality": "reported",
     "raw": "11.01",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/436",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:46:06",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 436,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.01,
     "max": 11.01,
     "quality": "reported",
     "raw": "11.01",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.584,
     "max": 0.584,
     "quality": "reported",
     "raw": "0.584",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/437",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:46:06",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 437,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.01,
     "max": 11.01,
     "quality": "reported",
     "raw": "11.01",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.829,
     "max": 0.829,
     "quality": "reported",
     "raw": "0.829",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/438",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:46:06",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 438,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 11.01,
     "max": 11.01,
     "quality": "reported",
     "raw": "11.01",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.051,
     "max": 1.051,
     "quality": "reported",
     "raw": "1.051",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/439",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:46:06",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 439,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 10.07,
     "max": 10.07,
     "quality": "reported",
     "raw": "10.07",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.284,
     "max": 1.284,
     "quality": "reported",
     "raw": "1.284",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/440",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:46:06",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 440,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 10.07,
     "max": 10.07,
     "quality": "reported",
     "raw": "10.07",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.518,
     "max": 1.518,
     "quality": "reported",
     "raw": "1.518",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/441",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:46:06",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 441,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 10.07,
     "max": 10.07,
     "quality": "reported",
     "raw": "10.07",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.751,
     "max": 1.751,
     "quality": "reported",
     "raw": "1.751",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/442",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:50:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 442,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 35.45,
     "max": 35.45,
     "quality": "reported",
     "raw": "35.45",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.852,
     "max": 0.852,
     "quality": "reported",
     "raw": "0.852",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/443",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:50:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 443,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 34.51,
     "max": 34.51,
     "quality": "reported",
     "raw": "34.51",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.027,
     "max": 1.027,
     "quality": "reported",
     "raw": "1.027",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/444",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:50:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 444,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 34.51,
     "max": 34.51,
     "quality": "reported",
     "raw": "34.51",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.109,
     "max": 1.109,
     "quality": "reported",
     "raw": "1.109",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/445",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:50:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 445,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 35.45,
     "max": 35.45,
     "quality": "reported",
     "raw": "35.45",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.168,
     "max": 1.168,
     "quality": "reported",
     "raw": "1.168",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/446",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:50:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 446,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 35.45,
     "max": 35.45,
     "quality": "reported",
     "raw": "35.45",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.284,
     "max": 1.284,
     "quality": "reported",
     "raw": "1.284",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/447",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:50:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 447,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 35.45,
     "max": 35.45,
     "quality": "reported",
     "raw": "35.45",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.401,
     "max": 1.401,
     "quality": "reported",
     "raw": "1.401",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/448",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:50:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 448,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 35.45,
     "max": 35.45,
     "quality": "reported",
     "raw": "35.45",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.576,
     "max": 1.576,
     "quality": "reported",
     "raw": "1.576",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/449",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:50:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 449,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 35.45,
     "max": 35.45,
     "quality": "reported",
     "raw": "35.45",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.635,
     "max": 1.635,
     "quality": "reported",
     "raw": "1.635",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/450",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:50:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 450,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 34.51,
     "max": 34.51,
     "quality": "reported",
     "raw": "34.51",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.775,
     "max": 1.775,
     "quality": "reported",
     "raw": "1.775",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/451",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:50:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 451,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 34.51,
     "max": 34.51,
     "quality": "reported",
     "raw": "34.51",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.81,
     "max": 1.81,
     "quality": "reported",
     "raw": "1.81",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/452",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 11:50:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 452,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 34.51,
     "max": 34.51,
     "quality": "reported",
     "raw": "34.51",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.926,
     "max": 1.926,
     "quality": "reported",
     "raw": "1.926",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/453",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 12:06:43",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 453,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 46.73,
     "max": 46.73,
     "quality": "reported",
     "raw": "46.73",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.417,
     "max": 2.417,
     "quality": "reported",
     "raw": "2.417",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/454",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 12:11:20",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 454,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 56.14,
     "max": 56.14,
     "quality": "reported",
     "raw": "56.14",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.728,
     "max": 1.728,
     "quality": "reported",
     "raw": "1.728",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.4064,
     "max": 0.4064,
     "quality": "reported",
     "raw": "0.4064",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/455",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 12:34:00",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 455,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 24.17,
     "max": 24.17,
     "quality": "reported",
     "raw": "24.17",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.525,
     "max": 0.525,
     "quality": "reported",
     "raw": "0.525",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/456",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 12:34:00",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 456,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 24.17,
     "max": 24.17,
     "quality": "reported",
     "raw": "24.17",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.712,
     "max": 0.712,
     "quality": "reported",
     "raw": "0.712",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/457",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 12:34:00",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 457,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 24.17,
     "max": 24.17,
     "quality": "reported",
     "raw": "24.17",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.829,
     "max": 0.829,
     "quality": "reported",
     "raw": "0.829",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/458",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 12:36:12",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 458,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 13.83,
     "max": 13.83,
     "quality": "reported",
     "raw": "13.83",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.292,
     "max": 0.292,
     "quality": "reported",
     "raw": "0.292",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/459",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 12:36:12",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 459,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 12.89,
     "max": 12.89,
     "quality": "reported",
     "raw": "12.89",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.467,
     "max": 0.467,
     "quality": "reported",
     "raw": "0.467",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/460",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 12:36:12",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 460,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 12.89,
     "max": 12.89,
     "quality": "reported",
     "raw": "12.89",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/461",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 12:43:03",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 461,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 51.43,
     "max": 51.43,
     "quality": "reported",
     "raw": "51.43",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.226,
     "max": 1.226,
     "quality": "reported",
     "raw": "1.226",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/462",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 12:43:03",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 462,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 51.43,
     "max": 51.43,
     "quality": "reported",
     "raw": "51.43",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.343,
     "max": 1.343,
     "quality": "reported",
     "raw": "1.343",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/463",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 12:43:03",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 463,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 50.49,
     "max": 50.49,
     "quality": "reported",
     "raw": "50.49",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.992,
     "max": 0.992,
     "quality": "reported",
     "raw": "0.992",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/464",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 12:46:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 464,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 32.63,
     "max": 32.63,
     "quality": "reported",
     "raw": "32.63",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.234,
     "max": 0.234,
     "quality": "reported",
     "raw": "0.234",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/465",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 12:46:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 465,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 32.63,
     "max": 32.63,
     "quality": "reported",
     "raw": "32.63",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.409,
     "max": 0.409,
     "quality": "reported",
     "raw": "0.409",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/466",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 12:46:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 466,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 32.63,
     "max": 32.63,
     "quality": "reported",
     "raw": "32.63",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.584,
     "max": 0.584,
     "quality": "reported",
     "raw": "0.584",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/467",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 12:46:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 467,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 32.63,
     "max": 32.63,
     "quality": "reported",
     "raw": "32.63",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.759,
     "max": 0.759,
     "quality": "reported",
     "raw": "0.759",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-107/spice/468",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 12:46:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 468,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 31.69,
     "max": 31.69,
     "quality": "reported",
     "raw": "31.69",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.934,
     "max": 0.934,
     "quality": "reported",
     "raw": "0.934",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    },
    "smoke_point_length_mm": {
     "min": 26.296567,
     "max": 26.296567,
     "quality": "reported",
     "raw": "0.026296566546721068",
     "column": "Smoke Point Datasheet (2)!AL54",
     "note": "From NASA's file PSI-107_Raw Data_SmokePointReview-0g-3.xlsx, Smoke Point Datasheet (2)!AL54. Cell AL54, column \"Length\" in m, times 1000 gives mm. The same value is in P54 (mm, a formula: pixel count from the video times NASA's calibration) and in S54 of the first sheet (\"smk pt mm\"). Test point P7-7."
    }
   }
  },
  {
   "id": "PSI-107/spice/469",
   "accession": "PSI-107",
   "investigation": "SPICE",
   "type": "test",
   "label": "Day 174 12:46:17",
   "source_table": "PSI-107_Experimental table_Spice.csv",
   "source_row": 469,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-107",
   "values": {
    "flow_speed_cm_s": {
     "min": 31.69,
     "max": 31.69,
     "quality": "reported",
     "raw": "31.69",
     "column": "Air Rate (cm/s)"
    },
    "fuel": {
     "text": "propylene",
     "quality": "reported",
     "raw": "Propylene",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.109,
     "max": 1.109,
     "quality": "reported",
     "raw": "1.109",
     "column": "Fuel Rate (mg/s)"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "non-buoyant jet diffusion flames under various co-flow conditions",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "context",
     "note": "The co-flow is air; oxygen is not listed per test, so 21% is used.",
     "evidence": "ignited in a controlled co-flow air environment",
     "evidence_source": "psi"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 0.762,
     "max": 0.762,
     "quality": "reported",
     "raw": "0.762",
     "column": "Nozzle (mm)"
    }
   }
  },
  {
   "id": "PSI-142/coolflame-ground/1",
   "accession": "PSI-142",
   "investigation": "Cool-flame transitions",
   "type": "dataset",
   "label": "Dataset 1",
   "source_table": "PSI-142_Experimental table_Data Summary Table.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-142",
   "values": {
    "description": {
     "text": "CFE limit with ozone",
     "quality": "reported",
     "raw": "CFE limit with ozone",
     "column": "Data Description"
    },
    "notes": {
     "text": "http://dx.doi.org/10.1016/j.combustflame.2017.01.028",
     "quality": "reported",
     "raw": "http://dx.doi.org/10.1016/j.combustflame.2017.01.028",
     "column": "Reference Publication Link"
    }
   }
  },
  {
   "id": "PSI-142/coolflame-ground/2",
   "accession": "PSI-142",
   "investigation": "Cool-flame transitions",
   "type": "dataset",
   "label": "Dataset 2",
   "source_table": "PSI-142_Experimental table_Data Summary Table.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-142",
   "values": {
    "description": {
     "text": "CFE limit without ozone",
     "quality": "reported",
     "raw": "CFE limit without ozone",
     "column": "Data Description"
    },
    "notes": {
     "text": "http://dx.doi.org/10.1016/j.combustflame.2017.01.028",
     "quality": "reported",
     "raw": "http://dx.doi.org/10.1016/j.combustflame.2017.01.028",
     "column": "Reference Publication Link"
    }
   }
  },
  {
   "id": "PSI-142/coolflame-ground/3",
   "accession": "PSI-142",
   "investigation": "Cool-flame transitions",
   "type": "dataset",
   "label": "Dataset 3",
   "source_table": "PSI-142_Experimental table_Data Summary Table.csv",
   "source_row": 3,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-142",
   "values": {
    "description": {
     "text": "CFE and HFE Predicted vs Measured",
     "quality": "reported",
     "raw": "CFE and HFE Predicted vs Measured",
     "column": "Data Description"
    },
    "notes": {
     "text": "http://dx.doi.org/10.1016/j.combustflame.2017.01.028",
     "quality": "reported",
     "raw": "http://dx.doi.org/10.1016/j.combustflame.2017.01.028",
     "column": "Reference Publication Link"
    }
   }
  },
  {
   "id": "PSI-142/coolflame-ground/4",
   "accession": "PSI-142",
   "investigation": "Cool-flame transitions",
   "type": "dataset",
   "label": "Dataset 4",
   "source_table": "PSI-142_Experimental table_Data Summary Table.csv",
   "source_row": 4,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-142",
   "values": {
    "description": {
     "text": "Measured and computed DME/O2/O3 CFE and HFE",
     "quality": "reported",
     "raw": "Measured and computed DME/O2/O3 CFE and HFE",
     "column": "Data Description"
    },
    "notes": {
     "text": "https://doi.org/10.1016/j.proci.2018.07.050",
     "quality": "reported",
     "raw": "https://doi.org/10.1016/j.proci.2018.07.050",
     "column": "Reference Publication Link"
    }
   }
  },
  {
   "id": "PSI-142/coolflame-ground/5",
   "accession": "PSI-142",
   "investigation": "Cool-flame transitions",
   "type": "dataset",
   "label": "Dataset 5",
   "source_table": "PSI-142_Experimental table_Data Summary Table.csv",
   "source_row": 5,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-142",
   "values": {
    "description": {
     "text": "CH2O PLIF and thermometry",
     "quality": "reported",
     "raw": "CH2O PLIF and thermometry",
     "column": "Data Description"
    },
    "notes": {
     "text": "https://doi.org/10.1016/j.combustflame.2018.03.013",
     "quality": "reported",
     "raw": "https://doi.org/10.1016/j.combustflame.2018.03.013",
     "column": "Reference Publication Link"
    }
   }
  },
  {
   "id": "PSI-142/coolflame-ground/6",
   "accession": "PSI-142",
   "investigation": "Cool-flame transitions",
   "type": "dataset",
   "label": "Dataset 6",
   "source_table": "PSI-142_Experimental table_Data Summary Table.csv",
   "source_row": 6,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-142",
   "values": {
    "description": {
     "text": "nC7/nC10/nC12 chemiluminescence",
     "quality": "reported",
     "raw": "nC7/nC10/nC12 chemiluminescence",
     "column": "Data Description"
    },
    "notes": {
     "text": "https://doi.org/10.1016/j.proci.2018.06.161",
     "quality": "reported",
     "raw": "https://doi.org/10.1016/j.proci.2018.06.161",
     "column": "Reference Publication Link"
    }
   }
  },
  {
   "id": "PSI-142/coolflame-ground/7",
   "accession": "PSI-142",
   "investigation": "Cool-flame transitions",
   "type": "dataset",
   "label": "Dataset 7",
   "source_table": "PSI-142_Experimental table_Data Summary Table.csv",
   "source_row": 7,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-142",
   "values": {
    "description": {
     "text": "nC12 chemiluminescence",
     "quality": "reported",
     "raw": "nC12 chemiluminescence",
     "column": "Data Description"
    },
    "notes": {
     "text": "https://doi.org/10.1016/j.proci.2018.06.162",
     "quality": "reported",
     "raw": "https://doi.org/10.1016/j.proci.2018.06.162",
     "column": "Reference Publication Link"
    }
   }
  },
  {
   "id": "PSI-142/coolflame-ground/8",
   "accession": "PSI-142",
   "investigation": "Cool-flame transitions",
   "type": "dataset",
   "label": "Dataset 8",
   "source_table": "PSI-142_Experimental table_Data Summary Table.csv",
   "source_row": 8,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-142",
   "values": {
    "description": {
     "text": "nC12 thermometry",
     "quality": "reported",
     "raw": "nC12 thermometry",
     "column": "Data Description"
    },
    "notes": {
     "text": "https://doi.org/10.1016/j.proci.2018.06.163",
     "quality": "reported",
     "raw": "https://doi.org/10.1016/j.proci.2018.06.163",
     "column": "Reference Publication Link"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/1",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21196 A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196A1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 16:49:57:147 ,Experiment: 5,Test Point: 21196A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196A1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 16:49:57:147 ,Experiment: 5,Test Point: 21196A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2120,
     "max": 2120,
     "quality": "reported",
     "raw": "2120",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.2981,
     "max": 0.2981,
     "quality": "reported",
     "raw": "0.298100",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Failed to ignite",
     "quality": "reported",
     "raw": "Failed to ignite",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.59,
     "max": 5.59,
     "quality": "reported",
     "raw": "5.59",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 27.1,
     "max": 27.1,
     "quality": "reported",
     "raw": "27.1",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110,
     "max": 110,
     "quality": "reported",
     "raw": "1.10",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.1665,
     "max": 0.1665,
     "quality": "reported",
     "raw": "0.1665",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/2",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21196 A2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196A2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 17:11:32:592 ,Experiment: 5,Test Point: 21196A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196A2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 17:11:32:592 ,Experiment: 5,Test Point: 21196A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2120,
     "max": 2120,
     "quality": "reported",
     "raw": "2120",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 35,
     "max": 35,
     "quality": "reported",
     "raw": "35",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow",
     "quality": "reported",
     "raw": "yellow",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.2981,
     "max": 0.2981,
     "quality": "reported",
     "raw": "0.298100",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.59,
     "max": 5.59,
     "quality": "reported",
     "raw": "5.59",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 162.9,
     "max": 162.9,
     "quality": "reported",
     "raw": "162.9",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110,
     "max": 110,
     "quality": "reported",
     "raw": "1.10",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.1665,
     "max": 0.1665,
     "quality": "reported",
     "raw": "0.1665",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/3",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21196 F1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 3,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196F1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 17:33:38:557 ,Experiment: 5,Test Point: 21196F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196F1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 17:33:38:557 ,Experiment: 5,Test Point: 21196F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1786.99,
     "max": 1786.99,
     "quality": "reported",
     "raw": "1786.994366",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 36,
     "max": 36,
     "quality": "reported",
     "raw": "36",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.295425,
     "max": 0.295425,
     "quality": "reported",
     "raw": "0.295424848",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Not spherical shape",
     "quality": "reported",
     "raw": "Not spherical shape",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.58675,
     "max": 5.58675,
     "quality": "reported",
     "raw": "5.58675424",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 118.5,
     "max": 118.5,
     "quality": "reported",
     "raw": "118.5",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.126728,
     "max": 0.126728,
     "quality": "reported",
     "raw": "0.126728327",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/4",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21196 H1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 4,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196H1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 18:07:42:404 ,Experiment: 5,Test Point: 21196H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196H1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196H1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 18:07:42:404 ,Experiment: 5,Test Point: 21196H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196H1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1567.03,
     "max": 1567.03,
     "quality": "reported",
     "raw": "1567.030825",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.291765,
     "max": 0.291765,
     "quality": "reported",
     "raw": "0.291765297",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Not ignited",
     "quality": "reported",
     "raw": "Not ignited",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.12,
     "max": 0.12,
     "quality": "reported",
     "raw": "0.12",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.58675,
     "max": 5.58675,
     "quality": "reported",
     "raw": "5.58675424",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 26.7,
     "max": 26.7,
     "quality": "reported",
     "raw": "26.7",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.105557,
     "max": 0.105557,
     "quality": "reported",
     "raw": "0.105556515",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/5",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21196 J1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 5,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196J1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 18:20:36:471 ,Experiment: 5,Test Point: 21196J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196J1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196J1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 18:20:36:471 ,Experiment: 5,Test Point: 21196J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196J1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1680.72,
     "max": 1680.72,
     "quality": "reported",
     "raw": "1680.718299",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.291765,
     "max": 0.291765,
     "quality": "reported",
     "raw": "0.291765297",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "text": "flash",
     "quality": "reported",
     "raw": "flash",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Not lasted long",
     "quality": "reported",
     "raw": "Not lasted long",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.135,
     "max": 0.135,
     "quality": "reported",
     "raw": "0.135",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.58675,
     "max": 5.58675,
     "quality": "reported",
     "raw": "5.58675424",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 27.8,
     "max": 27.8,
     "quality": "reported",
     "raw": "27.8",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.116988,
     "max": 0.116988,
     "quality": "reported",
     "raw": "0.116987922",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/6",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21196 F2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 6,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196F2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 18:34:07:346 ,Experiment: 5,Test Point: 21196F2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196F2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196F2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 18:34:07:346 ,Experiment: 5,Test Point: 21196F2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196F2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1785.12,
     "max": 1785.12,
     "quality": "reported",
     "raw": "1785.119116",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.291654,
     "max": 0.291654,
     "quality": "reported",
     "raw": "0.291653541",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.79338,
     "max": 2.79338,
     "quality": "reported",
     "raw": "2.79337712",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 169.2,
     "max": 169.2,
     "quality": "reported",
     "raw": "169.2",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.128127,
     "max": 0.128127,
     "quality": "reported",
     "raw": "0.128126732",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/7",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21196 F3",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 7,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196F3_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 18:56:01:623 ,Experiment: 5,Test Point: 21196F3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196F3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196F3_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 18:56:01:623 ,Experiment: 5,Test Point: 21196F3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196F3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1783.43,
     "max": 1783.43,
     "quality": "reported",
     "raw": "1783.432003",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.375,
     "max": 0.375,
     "quality": "reported",
     "raw": "0.375",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.288336,
     "max": 0.288336,
     "quality": "reported",
     "raw": "0.288335586",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "text": "flash",
     "quality": "reported",
     "raw": "flash",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "A flash and gone",
     "quality": "reported",
     "raw": "A flash and gone",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.39669,
     "max": 1.39669,
     "quality": "reported",
     "raw": "1.39668856",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 39.9,
     "max": 39.9,
     "quality": "reported",
     "raw": "39.9",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.129383,
     "max": 0.129383,
     "quality": "reported",
     "raw": "0.129383451",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/8",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21196 F4",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 8,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196F4_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 19:06:48:090 ,Experiment: 5,Test Point: 21196F4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196F4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196F4_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 19:06:48:090 ,Experiment: 5,Test Point: 21196F4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196F4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1783.42,
     "max": 1783.42,
     "quality": "reported",
     "raw": "1783.419087",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5625,
     "max": 0.5625,
     "quality": "reported",
     "raw": "0.5625",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.28831,
     "max": 0.28831,
     "quality": "reported",
     "raw": "0.288310452",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "text": "flash",
     "quality": "reported",
     "raw": "flash",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Not lasted long",
     "quality": "reported",
     "raw": "Not lasted long",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.09503,
     "max": 2.09503,
     "quality": "reported",
     "raw": "2.09503284",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 66.1,
     "max": 66.1,
     "quality": "reported",
     "raw": "66.1",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.129393,
     "max": 0.129393,
     "quality": "reported",
     "raw": "0.129393068",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/9",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21196 F5",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 9,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196F5_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 19:21:28:177 ,Experiment: 5,Test Point: 21196F5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196F5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196F5_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 19:21:28:177 ,Experiment: 5,Test Point: 21196F5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196F5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1783.4,
     "max": 1783.4,
     "quality": "reported",
     "raw": "1783.399711",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.439,
     "max": 2.439,
     "quality": "reported",
     "raw": "2.439",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.288273,
     "max": 0.288273,
     "quality": "reported",
     "raw": "0.288272755",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "text": "flash",
     "quality": "reported",
     "raw": "flash",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Not lasted long",
     "quality": "reported",
     "raw": "Not lasted long",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 9.08406,
     "max": 9.08406,
     "quality": "reported",
     "raw": "9.084062394",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 28.4,
     "max": 28.4,
     "quality": "reported",
     "raw": "28.4",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.129407,
     "max": 0.129407,
     "quality": "reported",
     "raw": "0.129407493",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/10",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21196 F6",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 10,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196F6_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 19:46:04:259 ,Experiment: 5,Test Point: 21196F6,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196F6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196F6_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 19:46:04:259 ,Experiment: 5,Test Point: 21196F6,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196F6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1783.32,
     "max": 1783.32,
     "quality": "reported",
     "raw": "1783.315686",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.288109,
     "max": 0.288109,
     "quality": "reported",
     "raw": "0.28810939",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Repeat of F2",
     "quality": "reported",
     "raw": "Repeat of F2",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.79338,
     "max": 2.79338,
     "quality": "reported",
     "raw": "2.79337712",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 167.3,
     "max": 167.3,
     "quality": "reported",
     "raw": "167.3",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.12947,
     "max": 0.12947,
     "quality": "reported",
     "raw": "0.129470046",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/11",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21196 K1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 11,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196K1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 20:16:44:771 ,Experiment: 5,Test Point: 21196K1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196K1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196K1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 20:16:44:771 ,Experiment: 5,Test Point: 21196K1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196K1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1781.61,
     "max": 1781.61,
     "quality": "reported",
     "raw": "1781.609691",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.284829,
     "max": 0.284829,
     "quality": "reported",
     "raw": "0.284828889",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "text": "flash",
     "quality": "reported",
     "raw": "flash",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Not lasted long",
     "quality": "reported",
     "raw": "Not lasted long",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.79338,
     "max": 2.79338,
     "quality": "reported",
     "raw": "2.79337712",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 63.5,
     "max": 63.5,
     "quality": "reported",
     "raw": "63.5",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 49.5382,
     "max": 49.5382,
     "quality": "reported",
     "raw": "0.4953817",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.130739,
     "max": 0.130739,
     "quality": "reported",
     "raw": "0.130739408",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/12",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21196 L1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 12,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196L1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 20:29:40:651 ,Experiment: 5,Test Point: 21196L1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196L1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196L1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 20:29:40:651 ,Experiment: 5,Test Point: 21196L1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196L1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2111.05,
     "max": 2111.05,
     "quality": "reported",
     "raw": "2111.04677",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.284718,
     "max": 0.284718,
     "quality": "reported",
     "raw": "0.284718228",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "text": "flash",
     "quality": "reported",
     "raw": "flash",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Not lasted long",
     "quality": "reported",
     "raw": "Not lasted long",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.79338,
     "max": 2.79338,
     "quality": "reported",
     "raw": "2.79337712",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 122.9,
     "max": 122.9,
     "quality": "reported",
     "raw": "122.9",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 49.5382,
     "max": 49.5382,
     "quality": "reported",
     "raw": "0.4953817",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.172801,
     "max": 0.172801,
     "quality": "reported",
     "raw": "0.172800669",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/13",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21196 L2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 13,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196L2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 21:00:03:794 ,Experiment: 5,Test Point: 21196L2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196L2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196L2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 21:00:03:794 ,Experiment: 5,Test Point: 21196L2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196L2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2110.99,
     "max": 2110.99,
     "quality": "reported",
     "raw": "2110.98997",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 63,
     "max": 63,
     "quality": "reported",
     "raw": "63",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.284636,
     "max": 0.284636,
     "quality": "reported",
     "raw": "0.284635929",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.79338,
     "max": 2.79338,
     "quality": "reported",
     "raw": "2.79337712",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 273.7,
     "max": 273.7,
     "quality": "reported",
     "raw": "273.7",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 49.5382,
     "max": 49.5382,
     "quality": "reported",
     "raw": "0.4953817",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.172841,
     "max": 0.172841,
     "quality": "reported",
     "raw": "0.17284115",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/14",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21196 M1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 14,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196M1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 21:30:05:734 ,Experiment: 5,Test Point: 21196M1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196M1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196M1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 21:30:05:734 ,Experiment: 5,Test Point: 21196M1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196M1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2401,
     "max": 2401,
     "quality": "reported",
     "raw": "2401.004197",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.279535,
     "max": 0.279535,
     "quality": "reported",
     "raw": "0.279534884",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "text": "flash",
     "quality": "reported",
     "raw": "flash",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Not lasted long",
     "quality": "reported",
     "raw": "Not lasted long",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.79338,
     "max": 2.79338,
     "quality": "reported",
     "raw": "2.79337712",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 136.4,
     "max": 136.4,
     "quality": "reported",
     "raw": "136.4",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 49.5382,
     "max": 49.5382,
     "quality": "reported",
     "raw": "0.4953817",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.230838,
     "max": 0.230838,
     "quality": "reported",
     "raw": "0.230837563",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/15",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21196 M2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 15,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196M2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 21:45:45:227 ,Experiment: 5,Test Point: 21196M2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196M2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196M2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 21:45:45:227 ,Experiment: 5,Test Point: 21196M2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196M2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2400.96,
     "max": 2400.96,
     "quality": "reported",
     "raw": "2400.958103",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.279475,
     "max": 0.279475,
     "quality": "reported",
     "raw": "0.279474794",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.79338,
     "max": 2.79338,
     "quality": "reported",
     "raw": "2.79337712",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 515.2,
     "max": 515.2,
     "quality": "reported",
     "raw": "515.2",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 49.5382,
     "max": 49.5382,
     "quality": "reported",
     "raw": "0.4953817",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.230875,
     "max": 0.230875,
     "quality": "reported",
     "raw": "0.230874969",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/16",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21196 M2_1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 16,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196M2_1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 22:05:42:879 ,Experiment: 5,Test Point: 21196M2_1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196M2_1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21196M2_1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-15 196 22:05:42:879 ,Experiment: 5,Test Point: 21196M2_1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 10.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21196M2_1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2397.91,
     "max": 2397.91,
     "quality": "reported",
     "raw": "2397.909121",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 64,
     "max": 64,
     "quality": "reported",
     "raw": "64",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.275557,
     "max": 0.275557,
     "quality": "reported",
     "raw": "0.275557001",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.58675,
     "max": 5.58675,
     "quality": "reported",
     "raw": "5.58675424",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 515.3,
     "max": 515.3,
     "quality": "reported",
     "raw": "515.3",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 49.5382,
     "max": 49.5382,
     "quality": "reported",
     "raw": "0.4953817",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.233341,
     "max": 0.233341,
     "quality": "reported",
     "raw": "0.233340944",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/17",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21202 A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 17,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202A1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-21 202 18:59:44:969 ,Experiment: 5,Test Point: 21202A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202A1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-21 202 18:59:44:969 ,Experiment: 5,Test Point: 21202A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2077.5,
     "max": 2077.5,
     "quality": "reported",
     "raw": "2077.502017",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.06,
     "max": 0.06,
     "quality": "reported",
     "raw": "0.06",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "no",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "No ignition",
     "quality": "reported",
     "raw": "No ignition",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 0.931126,
     "max": 0.931126,
     "quality": "reported",
     "raw": "0.931125707",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 26.5,
     "max": 26.5,
     "quality": "reported",
     "raw": "26.5",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.783871,
     "max": 0.783871,
     "quality": "reported",
     "raw": "0.783870758",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/18",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21202 A2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 18,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202A2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-21 202 19:16:06:016 ,Experiment: 5,Test Point: 21202A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202A2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-21 202 19:16:06:016 ,Experiment: 5,Test Point: 21202A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2077.5,
     "max": 2077.5,
     "quality": "reported",
     "raw": "2077.502017",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.06,
     "max": 0.06,
     "quality": "reported",
     "raw": "0.06",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Ignited, but lasted short.",
     "quality": "reported",
     "raw": "Ignited, but lasted short.",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.86225,
     "max": 1.86225,
     "quality": "reported",
     "raw": "1.862251413",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 62.3,
     "max": 62.3,
     "quality": "reported",
     "raw": "62.3",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.783871,
     "max": 0.783871,
     "quality": "reported",
     "raw": "0.783870758",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/19",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21202 A3",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 19,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202A3_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-21 202 19:25:27:206 ,Experiment: 5,Test Point: 21202A3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202A3_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-21 202 19:25:27:206 ,Experiment: 5,Test Point: 21202A3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2077.45,
     "max": 2077.45,
     "quality": "reported",
     "raw": "2077.445204",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 3.5,
     "max": 3.5,
     "quality": "reported",
     "raw": "3.5",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0599963,
     "max": 0.0599963,
     "quality": "reported",
     "raw": "0.059996273",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.7245,
     "max": 3.7245,
     "quality": "reported",
     "raw": "3.724502827",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 50.6,
     "max": 50.6,
     "quality": "reported",
     "raw": "50.6",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.783881,
     "max": 0.783881,
     "quality": "reported",
     "raw": "0.783881235",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/20",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21202 A4",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 20,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202A4_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-21 202 19:44:22:648 ,Experiment: 5,Test Point: 21202A4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202A4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202A4_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-21 202 19:44:22:648 ,Experiment: 5,Test Point: 21202A4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202A4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2077.25,
     "max": 2077.25,
     "quality": "reported",
     "raw": "2077.246332",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.439,
     "max": 2.439,
     "quality": "reported",
     "raw": "2.439",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0599832,
     "max": 0.0599832,
     "quality": "reported",
     "raw": "0.059983229",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 9.08406,
     "max": 9.08406,
     "quality": "reported",
     "raw": "9.084062394",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 44.6,
     "max": 44.6,
     "quality": "reported",
     "raw": "44.6",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.783918,
     "max": 0.783918,
     "quality": "reported",
     "raw": "0.783917907",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/21",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21202 H1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 21,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202H1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-21 202 21:33:45:879 ,Experiment: 5,Test Point: 21202H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202H1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202H1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-21 202 21:33:45:879 ,Experiment: 5,Test Point: 21202H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202H1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2566.54,
     "max": 2566.54,
     "quality": "reported",
     "raw": "2566.535755",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 28,
     "max": 28,
     "quality": "reported",
     "raw": "28",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1.0",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.12,
     "max": 0.12,
     "quality": "reported",
     "raw": "0.12",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.7245,
     "max": 3.7245,
     "quality": "reported",
     "raw": "3.724502827",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 214.1,
     "max": 214.1,
     "quality": "reported",
     "raw": "214.1",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.645564,
     "max": 0.645564,
     "quality": "reported",
     "raw": "0.645563961",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/22",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21202 H2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 22,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202H2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-21 202 21:47:08:342 ,Experiment: 5,Test Point: 21202H2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202H2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202H2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-21 202 21:47:08:342 ,Experiment: 5,Test Point: 21202H2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202H2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2565.96,
     "max": 2565.96,
     "quality": "reported",
     "raw": "2565.96006",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 16,
     "max": 16,
     "quality": "reported",
     "raw": "16",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.439,
     "max": 2.439,
     "quality": "reported",
     "raw": "2.439",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.119859,
     "max": 0.119859,
     "quality": "reported",
     "raw": "0.119858746",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 9.08406,
     "max": 9.08406,
     "quality": "reported",
     "raw": "9.084062394",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 107.6,
     "max": 107.6,
     "quality": "reported",
     "raw": "107.6",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.645831,
     "max": 0.645831,
     "quality": "reported",
     "raw": "0.645831058",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/23",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21202 H3",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 23,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202H3_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-21 202 21:57:03:870 ,Experiment: 5,Test Point: 21202H3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202H3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202H3_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-21 202 21:57:03:870 ,Experiment: 5,Test Point: 21202H3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202H3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2565.16,
     "max": 2565.16,
     "quality": "reported",
     "raw": "2565.156105",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.119662,
     "max": 0.119662,
     "quality": "reported",
     "raw": "0.119662048",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Flow timed out",
     "quality": "reported",
     "raw": "Flow timed out",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.86225,
     "max": 1.86225,
     "quality": "reported",
     "raw": "1.862251413",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 469.1,
     "max": 469.1,
     "quality": "reported",
     "raw": "469.1",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.646203,
     "max": 0.646203,
     "quality": "reported",
     "raw": "0.646203374",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/24",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21202 H4",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 24,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202H4_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-21 202 22:21:12:660 ,Experiment: 5,Test Point: 21202H4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202H4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202H4_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-21 202 22:21:12:660 ,Experiment: 5,Test Point: 21202H4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202H4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2564.47,
     "max": 2564.47,
     "quality": "reported",
     "raw": "2564.474659",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 41,
     "max": 41,
     "quality": "reported",
     "raw": "41",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.119496,
     "max": 0.119496,
     "quality": "reported",
     "raw": "0.119495835",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.79338,
     "max": 2.79338,
     "quality": "reported",
     "raw": "2.79337712",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 301.2,
     "max": 301.2,
     "quality": "reported",
     "raw": "301.2",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.646518,
     "max": 0.646518,
     "quality": "reported",
     "raw": "0.646518332",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/25",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21202 J1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 25,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202J1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-21 202 22:40:20:419 ,Experiment: 5,Test Point: 21202J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202J1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202J1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-21 202 22:40:20:419 ,Experiment: 5,Test Point: 21202J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202J1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2563.84,
     "max": 2563.84,
     "quality": "reported",
     "raw": "2563.838376",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 53,
     "max": 53,
     "quality": "reported",
     "raw": "53",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.119341,
     "max": 0.119341,
     "quality": "reported",
     "raw": "0.119341058",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.79338,
     "max": 2.79338,
     "quality": "reported",
     "raw": "2.79337712",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 327.8,
     "max": 327.8,
     "quality": "reported",
     "raw": "327.8",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.646812,
     "max": 0.646812,
     "quality": "reported",
     "raw": "0.646811899",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/26",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21202 K1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 26,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202K1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-21 202 23:58:04:101 ,Experiment: 5,Test Point: 21202K1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202K1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202K1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-21 202 23:58:04:101 ,Experiment: 5,Test Point: 21202K1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202K1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2563.01,
     "max": 2563.01,
     "quality": "reported",
     "raw": "2563.014104",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 55,
     "max": 55,
     "quality": "reported",
     "raw": "55",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1.0",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.119141,
     "max": 0.119141,
     "quality": "reported",
     "raw": "0.119141157",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.7245,
     "max": 3.7245,
     "quality": "reported",
     "raw": "3.724502827",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 275.7,
     "max": 275.7,
     "quality": "reported",
     "raw": "275.7",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.647191,
     "max": 0.647191,
     "quality": "reported",
     "raw": "0.647191461",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/27",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21202 K2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 27,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202K2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-22 203 00:25:37:261 ,Experiment: 5,Test Point: 21202K2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202K2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202K2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-22 203 00:25:37:261 ,Experiment: 5,Test Point: 21202K2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202K2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2560.72,
     "max": 2560.72,
     "quality": "reported",
     "raw": "2560.723976",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 21,
     "max": 21,
     "quality": "reported",
     "raw": "21",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.439,
     "max": 2.439,
     "quality": "reported",
     "raw": "2.439",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.118589,
     "max": 0.118589,
     "quality": "reported",
     "raw": "0.118589306",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 9.08406,
     "max": 9.08406,
     "quality": "reported",
     "raw": "9.084062394",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 113.4,
     "max": 113.4,
     "quality": "reported",
     "raw": "113.4",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.648242,
     "max": 0.648242,
     "quality": "reported",
     "raw": "0.648241659",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/28",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21202 L1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 28,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202L1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-22 203 00:55:23:885 ,Experiment: 5,Test Point: 21202L1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202L1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21202L1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-22 203 00:55:23:885 ,Experiment: 5,Test Point: 21202L1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21202L1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2558.58,
     "max": 2558.58,
     "quality": "reported",
     "raw": "2558.57659",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 50,
     "max": 50,
     "quality": "reported",
     "raw": "50",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.118077,
     "max": 0.118077,
     "quality": "reported",
     "raw": "0.118076549",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.7245,
     "max": 3.7245,
     "quality": "reported",
     "raw": "3.724502827",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 255.6,
     "max": 255.6,
     "quality": "reported",
     "raw": "255.6",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.649221,
     "max": 0.649221,
     "quality": "reported",
     "raw": "0.649220596",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/29",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21209 A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 29,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209A1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 15:54:45:707 ,Experiment: 5,Test Point: 21209A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209A1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 15:54:45:707 ,Experiment: 5,Test Point: 21209A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2820.98,
     "max": 2820.98,
     "quality": "reported",
     "raw": "2820.983248",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 26,
     "max": 26,
     "quality": "reported",
     "raw": "26",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.24,
     "max": 0.24,
     "quality": "reported",
     "raw": "0.24",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Burner T limit, most images lost",
     "quality": "reported",
     "raw": "Burner T limit, most images lost",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.7245,
     "max": 3.7245,
     "quality": "reported",
     "raw": "3.724502827",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 544.1,
     "max": 544.1,
     "quality": "reported",
     "raw": "544.1",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.478799,
     "max": 0.478799,
     "quality": "reported",
     "raw": "0.478798757",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/30",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21209 A2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 30,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "adiabatic_flame_temp_k": {
     "min": 2819.84,
     "max": 2819.84,
     "quality": "reported",
     "raw": "2819.838789",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.435,
     "max": 2.435,
     "quality": "reported",
     "raw": "2.435",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.238982,
     "max": 0.238982,
     "quality": "reported",
     "raw": "0.238982459",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Aborted",
     "quality": "reported",
     "raw": "Aborted",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 9.06916,
     "max": 9.06916,
     "quality": "reported",
     "raw": "9.069164383",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 25.7,
     "max": 25.7,
     "quality": "reported",
     "raw": "25.7",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.479841,
     "max": 0.479841,
     "quality": "reported",
     "raw": "0.47984081",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/31",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21209 A3",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 31,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209A3_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 16:27:50:438 ,Experiment: 5,Test Point: 21209A3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209A3_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 16:27:50:438 ,Experiment: 5,Test Point: 21209A3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2819.84,
     "max": 2819.84,
     "quality": "reported",
     "raw": "2819.838789",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 67,
     "max": 67,
     "quality": "reported",
     "raw": "67",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.435,
     "max": 2.435,
     "quality": "reported",
     "raw": "2.435",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.238982,
     "max": 0.238982,
     "quality": "reported",
     "raw": "0.238982459",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 9.06916,
     "max": 9.06916,
     "quality": "reported",
     "raw": "9.069164383",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 300.3,
     "max": 300.3,
     "quality": "reported",
     "raw": "300.3",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.479841,
     "max": 0.479841,
     "quality": "reported",
     "raw": "0.47984081",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/32",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21209 B1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 32,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209B1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 16:50:16:387 ,Experiment: 5,Test Point: 21209B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209B1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 16:50:16:387 ,Experiment: 5,Test Point: 21209B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2814.15,
     "max": 2814.15,
     "quality": "reported",
     "raw": "2814.150439",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 136,
     "max": 136,
     "quality": "reported",
     "raw": "136",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.435,
     "max": 2.435,
     "quality": "reported",
     "raw": "2.435",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.23405,
     "max": 0.23405,
     "quality": "reported",
     "raw": "0.234050039",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 9.06916,
     "max": 9.06916,
     "quality": "reported",
     "raw": "9.069164383",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 300,
     "max": 300,
     "quality": "reported",
     "raw": "300",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.484959,
     "max": 0.484959,
     "quality": "reported",
     "raw": "0.484959237",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/33",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21209 A4",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 33,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209A4_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 17:07:08:268 ,Experiment: 5,Test Point: 21209A4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209A4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209A4_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 17:07:08:268 ,Experiment: 5,Test Point: 21209A4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209A4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2802.21,
     "max": 2802.21,
     "quality": "reported",
     "raw": "2802.206567",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.224322,
     "max": 0.224322,
     "quality": "reported",
     "raw": "0.224321623",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.58675,
     "max": 5.58675,
     "quality": "reported",
     "raw": "5.58675424",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 419.1,
     "max": 419.1,
     "quality": "reported",
     "raw": "419.1",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.495393,
     "max": 0.495393,
     "quality": "reported",
     "raw": "0.495392754",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/34",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21209 H1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 34,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209H1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 17:22:49:742 ,Experiment: 5,Test Point: 21209H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209H1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209H1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 17:22:49:742 ,Experiment: 5,Test Point: 21209H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209H1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2621.4,
     "max": 2621.4,
     "quality": "reported",
     "raw": "2621.397849",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.221438,
     "max": 0.221438,
     "quality": "reported",
     "raw": "0.221438453",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.58675,
     "max": 5.58675,
     "quality": "reported",
     "raw": "5.58675424",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 290.2,
     "max": 290.2,
     "quality": "reported",
     "raw": "290.2",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.379684,
     "max": 0.379684,
     "quality": "reported",
     "raw": "0.379683661",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/35",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21209 J1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 35,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209J1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 17:37:17:613 ,Experiment: 5,Test Point: 21209J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209J1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209J1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 17:37:17:613 ,Experiment: 5,Test Point: 21209J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209J1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2339.78,
     "max": 2339.78,
     "quality": "reported",
     "raw": "2339.776556",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow",
     "quality": "reported",
     "raw": "yellow",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.21748,
     "max": 0.21748,
     "quality": "reported",
     "raw": "0.217480394",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.58675,
     "max": 5.58675,
     "quality": "reported",
     "raw": "5.58675424",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 248.4,
     "max": 248.4,
     "quality": "reported",
     "raw": "248.4",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.277471,
     "max": 0.277471,
     "quality": "reported",
     "raw": "0.277470501",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/36",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21209 F1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 36,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209F1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 18:14:26:635 ,Experiment: 5,Test Point: 21209F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209F1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 18:14:26:635 ,Experiment: 5,Test Point: 21209F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2044.77,
     "max": 2044.77,
     "quality": "reported",
     "raw": "2044.76624",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.21185,
     "max": 0.21185,
     "quality": "reported",
     "raw": "0.211850471",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Not round shape",
     "quality": "reported",
     "raw": "Not round shape",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.58675,
     "max": 5.58675,
     "quality": "reported",
     "raw": "5.58675424",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 201.4,
     "max": 201.4,
     "quality": "reported",
     "raw": "201.4",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.21831,
     "max": 0.21831,
     "quality": "reported",
     "raw": "0.218310119",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/37",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21209 F2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 37,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209F2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 18:36:00:206 ,Experiment: 5,Test Point: 21209F2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209F2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209F2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 18:36:00:206 ,Experiment: 5,Test Point: 21209F2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209F2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2035.76,
     "max": 2035.76,
     "quality": "reported",
     "raw": "2035.764382",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.204571,
     "max": 0.204571,
     "quality": "reported",
     "raw": "0.204571036",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.7245,
     "max": 3.7245,
     "quality": "reported",
     "raw": "3.724502827",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 213.7,
     "max": 213.7,
     "quality": "reported",
     "raw": "213.7",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.224244,
     "max": 0.224244,
     "quality": "reported",
     "raw": "0.224244151",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/38",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21209 F3",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 38,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209F3_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 18:57:51:053 ,Experiment: 5,Test Point: 21209F3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209F3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209F3_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 18:57:51:053 ,Experiment: 5,Test Point: 21209F3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209F3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2029.56,
     "max": 2029.56,
     "quality": "reported",
     "raw": "2029.562068",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.199816,
     "max": 0.199816,
     "quality": "reported",
     "raw": "0.199816112",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.86225,
     "max": 1.86225,
     "quality": "reported",
     "raw": "1.862251413",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 317.3,
     "max": 317.3,
     "quality": "reported",
     "raw": "317.3",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.228301,
     "max": 0.228301,
     "quality": "reported",
     "raw": "0.228301179",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/39",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21209 B2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 39,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209B2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 19:22:55:418 ,Experiment: 5,Test Point: 21209B2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209B2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209B2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 19:22:55:418 ,Experiment: 5,Test Point: 21209B2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209B2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2763.4,
     "max": 2763.4,
     "quality": "reported",
     "raw": "2763.395427",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 48,
     "max": 48,
     "quality": "reported",
     "raw": "48",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.197463,
     "max": 0.197463,
     "quality": "reported",
     "raw": "0.197462908",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.7245,
     "max": 3.7245,
     "quality": "reported",
     "raw": "3.724502827",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 514,
     "max": 514,
     "quality": "reported",
     "raw": "514",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.526764,
     "max": 0.526764,
     "quality": "reported",
     "raw": "0.526764096",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/40",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21209 K1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 40,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209K1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 19:33:36:595 ,Experiment: 5,Test Point: 21209K1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209K1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21209K1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-07-28 209 19:33:36:595 ,Experiment: 5,Test Point: 21209K1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21209K1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1885.14,
     "max": 1885.14,
     "quality": "reported",
     "raw": "1885.144054",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 26,
     "max": 26,
     "quality": "reported",
     "raw": "26",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.196172,
     "max": 0.196172,
     "quality": "reported",
     "raw": "0.196171791",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Timed out",
     "quality": "reported",
     "raw": "Timed out",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.86225,
     "max": 1.86225,
     "quality": "reported",
     "raw": "1.862251413",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 128.1,
     "max": 128.1,
     "quality": "reported",
     "raw": "128.1",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.205906,
     "max": 0.205906,
     "quality": "reported",
     "raw": "0.205905777",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/41",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21216 A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 41,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216A1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 15:52:38:983 ,Experiment: 5,Test Point: 21216A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216A1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 15:52:38:983 ,Experiment: 5,Test Point: 21216A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2468.26,
     "max": 2468.26,
     "quality": "reported",
     "raw": "2468.258593",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 17,
     "max": 17,
     "quality": "reported",
     "raw": "17",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.1,
     "max": 0.1,
     "quality": "reported",
     "raw": "0.1",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.7245,
     "max": 3.7245,
     "quality": "reported",
     "raw": "3.724502827",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 160.2,
     "max": 160.2,
     "quality": "reported",
     "raw": "160.2",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.68578,
     "max": 0.68578,
     "quality": "reported",
     "raw": "0.68577955",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/42",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21216 A2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 42,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216A2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 16:04:07:950 ,Experiment: 5,Test Point: 21216A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216A2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 16:04:07:950 ,Experiment: 5,Test Point: 21216A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2467.8,
     "max": 2467.8,
     "quality": "reported",
     "raw": "2467.80041",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 15,
     "max": 15,
     "quality": "reported",
     "raw": "15",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.099923,
     "max": 0.099923,
     "quality": "reported",
     "raw": "0.099922963",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.58675,
     "max": 5.58675,
     "quality": "reported",
     "raw": "5.58675424",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 119,
     "max": 119,
     "quality": "reported",
     "raw": "119",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.685944,
     "max": 0.685944,
     "quality": "reported",
     "raw": "0.685944384",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/43",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21216 A3",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 43,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216A3_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 16:17:18:214 ,Experiment: 5,Test Point: 21216A3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216A3_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 16:17:18:214 ,Experiment: 5,Test Point: 21216A3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2467.39,
     "max": 2467.39,
     "quality": "reported",
     "raw": "2467.389001",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 15,
     "max": 15,
     "quality": "reported",
     "raw": "15",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.435,
     "max": 2.435,
     "quality": "reported",
     "raw": "2.435",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0998539,
     "max": 0.0998539,
     "quality": "reported",
     "raw": "0.099853897",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 9.06916,
     "max": 9.06916,
     "quality": "reported",
     "raw": "9.069164383",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 100,
     "max": 100,
     "quality": "reported",
     "raw": "100",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.686092,
     "max": 0.686092,
     "quality": "reported",
     "raw": "0.686092233",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/44",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21216 A4",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 44,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216A4_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 16:29:50:972 ,Experiment: 5,Test Point: 21216A4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216A4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216A4_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 16:29:50:972 ,Experiment: 5,Test Point: 21216A4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216A4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2466.72,
     "max": 2466.72,
     "quality": "reported",
     "raw": "2466.720234",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 36,
     "max": 36,
     "quality": "reported",
     "raw": "36",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0997418,
     "max": 0.0997418,
     "quality": "reported",
     "raw": "0.099741839",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.86225,
     "max": 1.86225,
     "quality": "reported",
     "raw": "1.862251413",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 330.4,
     "max": 330.4,
     "quality": "reported",
     "raw": "330.4",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.686332,
     "max": 0.686332,
     "quality": "reported",
     "raw": "0.686332251",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/45",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21216 A5",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 45,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216A5_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 16:41:29:652 ,Experiment: 5,Test Point: 21216A5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216A5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216A5_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 16:41:29:652 ,Experiment: 5,Test Point: 21216A5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216A5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2466.39,
     "max": 2466.39,
     "quality": "reported",
     "raw": "2466.390164",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0996866,
     "max": 0.0996866,
     "quality": "reported",
     "raw": "0.09968663",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "text": "flash",
     "quality": "reported",
     "raw": "flash",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 0.931126,
     "max": 0.931126,
     "quality": "reported",
     "raw": "0.931125707",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 59.6,
     "max": 59.6,
     "quality": "reported",
     "raw": "59.6",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.686451,
     "max": 0.686451,
     "quality": "reported",
     "raw": "0.686450567",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/46",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21216 A6",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 46,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216A6_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 16:53:27:769 ,Experiment: 5,Test Point: 21216A6,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216A6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216A6_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 16:53:27:769 ,Experiment: 5,Test Point: 21216A6,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216A6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2466.39,
     "max": 2466.39,
     "quality": "reported",
     "raw": "2466.385577",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.375,
     "max": 0.375,
     "quality": "reported",
     "raw": "0.375",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0996859,
     "max": 0.0996859,
     "quality": "reported",
     "raw": "0.099685864",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.39669,
     "max": 1.39669,
     "quality": "reported",
     "raw": "1.39668856",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 471.4,
     "max": 471.4,
     "quality": "reported",
     "raw": "471.4",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.686452,
     "max": 0.686452,
     "quality": "reported",
     "raw": "0.686452211",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/47",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21216 B1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 47,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216B1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 17:12:20:982 ,Experiment: 5,Test Point: 21216B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216B1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 17:12:20:982 ,Experiment: 5,Test Point: 21216B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2465.93,
     "max": 2465.93,
     "quality": "reported",
     "raw": "2465.931264",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.09961,
     "max": 0.09961,
     "quality": "reported",
     "raw": "0.099609979",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.58675,
     "max": 5.58675,
     "quality": "reported",
     "raw": "5.58675424",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 142.9,
     "max": 142.9,
     "quality": "reported",
     "raw": "142.9",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.686615,
     "max": 0.686615,
     "quality": "reported",
     "raw": "0.686614905",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/48",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21216 C1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 48,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216C1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 17:37:21:019 ,Experiment: 5,Test Point: 21216C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216C1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 17:37:21:019 ,Experiment: 5,Test Point: 21216C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2292.75,
     "max": 2292.75,
     "quality": "reported",
     "raw": "2292.748844",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 12,
     "max": 12,
     "quality": "reported",
     "raw": "12",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0994951,
     "max": 0.0994951,
     "quality": "reported",
     "raw": "0.099495066",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.58675,
     "max": 5.58675,
     "quality": "reported",
     "raw": "5.58675424",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 77.6,
     "max": 77.6,
     "quality": "reported",
     "raw": "77.6",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.574515,
     "max": 0.574515,
     "quality": "reported",
     "raw": "0.574515172",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/49",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21216 F1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 49,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216F1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 17:54:57:576 ,Experiment: 5,Test Point: 21216F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216F1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 17:54:57:576 ,Experiment: 5,Test Point: 21216F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1786.73,
     "max": 1786.73,
     "quality": "reported",
     "raw": "1786.726147",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 68,
     "max": 68,
     "quality": "reported",
     "raw": "68",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0994246,
     "max": 0.0994246,
     "quality": "reported",
     "raw": "0.099424557",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.58675,
     "max": 5.58675,
     "quality": "reported",
     "raw": "5.58675424",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 126.5,
     "max": 126.5,
     "quality": "reported",
     "raw": "126.5",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.371165,
     "max": 0.371165,
     "quality": "reported",
     "raw": "0.371165407",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/50",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21216 H1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 50,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216H1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 20:29:07:290 ,Experiment: 5,Test Point: 21216H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216H1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216H1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 20:29:07:290 ,Experiment: 5,Test Point: 21216H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216H1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2460.65,
     "max": 2460.65,
     "quality": "reported",
     "raw": "2460.649609",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "20",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0987366,
     "max": 0.0987366,
     "quality": "reported",
     "raw": "0.098736583",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.58675,
     "max": 5.58675,
     "quality": "reported",
     "raw": "5.58675424",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 120.5,
     "max": 120.5,
     "quality": "reported",
     "raw": "120.5",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.688493,
     "max": 0.688493,
     "quality": "reported",
     "raw": "0.688493139",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/51",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21216 H2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 51,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216H2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 20:42:39:948 ,Experiment: 5,Test Point: 21216H2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216H2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216H2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 20:42:39:948 ,Experiment: 5,Test Point: 21216H2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216H2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2458.97,
     "max": 2458.97,
     "quality": "reported",
     "raw": "2458.969802",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 18,
     "max": 18,
     "quality": "reported",
     "raw": "18",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.435,
     "max": 2.435,
     "quality": "reported",
     "raw": "2.435",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0984622,
     "max": 0.0984622,
     "quality": "reported",
     "raw": "0.098462155",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 9.06916,
     "max": 9.06916,
     "quality": "reported",
     "raw": "9.069164383",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 99.1,
     "max": 99.1,
     "quality": "reported",
     "raw": "99.1",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.689085,
     "max": 0.689085,
     "quality": "reported",
     "raw": "0.689085467",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/52",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21216 J1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 52,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216J1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 20:54:55:232 ,Experiment: 5,Test Point: 21216J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216J1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216J1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 20:54:55:232 ,Experiment: 5,Test Point: 21216J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216J1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2283.99,
     "max": 2283.99,
     "quality": "reported",
     "raw": "2283.992627",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 19,
     "max": 19,
     "quality": "reported",
     "raw": "19",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.098062,
     "max": 0.098062,
     "quality": "reported",
     "raw": "0.098061989",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.7245,
     "max": 3.7245,
     "quality": "reported",
     "raw": "3.724502827",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 111.3,
     "max": 111.3,
     "quality": "reported",
     "raw": "111.3",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.578032,
     "max": 0.578032,
     "quality": "reported",
     "raw": "0.578032305",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/53",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21216 K1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 53,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216K1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 21:21:37:766 ,Experiment: 5,Test Point: 21216K1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216K1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21216K1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-04 216 21:21:37:766 ,Experiment: 5,Test Point: 21216K1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21216K1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1779.77,
     "max": 1779.77,
     "quality": "reported",
     "raw": "1779.772352",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0978408,
     "max": 0.0978408,
     "quality": "reported",
     "raw": "0.097840812",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.7245,
     "max": 3.7245,
     "quality": "reported",
     "raw": "3.724502827",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 131.4,
     "max": 131.4,
     "quality": "reported",
     "raw": "131.4",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.374894,
     "max": 0.374894,
     "quality": "reported",
     "raw": "0.374893855",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/54",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21222 A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 54,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21222A1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-10 222 17:02:24:062 ,Experiment: 5,Test Point: 21222A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21222A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21222A1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-10 222 17:02:24:062 ,Experiment: 5,Test Point: 21222A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21222A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2532.59,
     "max": 2532.59,
     "quality": "reported",
     "raw": "2532.591389",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.08,
     "max": 0.08,
     "quality": "reported",
     "raw": "0.08",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.44197,
     "max": 5.44197,
     "quality": "reported",
     "raw": "5.441972789",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 102.1,
     "max": 102.1,
     "quality": "reported",
     "raw": "102.1",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.664749,
     "max": 0.664749,
     "quality": "reported",
     "raw": "0.664749239",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/55",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21222 A2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 55,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21222A2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-10 222 17:16:54:826 ,Experiment: 5,Test Point: 21222A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21222A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21222A2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-10 222 17:16:54:826 ,Experiment: 5,Test Point: 21222A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21222A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2532.28,
     "max": 2532.28,
     "quality": "reported",
     "raw": "2532.275517",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 16,
     "max": 16,
     "quality": "reported",
     "raw": "16",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0799508,
     "max": 0.0799508,
     "quality": "reported",
     "raw": "0.079950834",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.62798,
     "max": 3.62798,
     "quality": "reported",
     "raw": "3.627981859",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 148.4,
     "max": 148.4,
     "quality": "reported",
     "raw": "148.4",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.66488,
     "max": 0.66488,
     "quality": "reported",
     "raw": "0.664880215",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/56",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21222 A3",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 56,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21222A3_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-10 222 17:29:33:308 ,Experiment: 5,Test Point: 21222A3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21222A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21222A3_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-10 222 17:29:33:308 ,Experiment: 5,Test Point: 21222A3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21222A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2531.99,
     "max": 2531.99,
     "quality": "reported",
     "raw": "2531.989722",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 18,
     "max": 18,
     "quality": "reported",
     "raw": "18",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0799064,
     "max": 0.0799064,
     "quality": "reported",
     "raw": "0.079906404",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 9.06995,
     "max": 9.06995,
     "quality": "reported",
     "raw": "9.069954649",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 100.4,
     "max": 100.4,
     "quality": "reported",
     "raw": "100.4",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.664999,
     "max": 0.664999,
     "quality": "reported",
     "raw": "0.664998626",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/57",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21222 A4",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 57,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21222A4_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-10 222 17:43:40:983 ,Experiment: 5,Test Point: 21222A4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21222A4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21222A4_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-10 222 17:43:40:983 ,Experiment: 5,Test Point: 21222A4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21222A4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2531.18,
     "max": 2531.18,
     "quality": "reported",
     "raw": "2531.184676",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 13,
     "max": 13,
     "quality": "reported",
     "raw": "13",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0797815,
     "max": 0.0797815,
     "quality": "reported",
     "raw": "0.079781526",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.81399,
     "max": 1.81399,
     "quality": "reported",
     "raw": "1.81399093",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 178,
     "max": 178,
     "quality": "reported",
     "raw": "178",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.665332,
     "max": 0.665332,
     "quality": "reported",
     "raw": "0.665331695",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/58",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21222 A5",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 58,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21222A5_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-10 222 17:55:57:181 ,Experiment: 5,Test Point: 21222A5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21222A5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21222A5_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-10 222 17:55:57:181 ,Experiment: 5,Test Point: 21222A5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21222A5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2531.07,
     "max": 2531.07,
     "quality": "reported",
     "raw": "2531.068185",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 3,
     "max": 3,
     "quality": "reported",
     "raw": "3",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.375,
     "max": 0.375,
     "quality": "reported",
     "raw": "0.375",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0797635,
     "max": 0.0797635,
     "quality": "reported",
     "raw": "0.07976349",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.36049,
     "max": 1.36049,
     "quality": "reported",
     "raw": "1.360493197",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 92.4,
     "max": 92.4,
     "quality": "reported",
     "raw": "92.4",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.66538,
     "max": 0.66538,
     "quality": "reported",
     "raw": "0.665379832",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/59",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21222 B1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 59,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21222B1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-10 222 18:16:15:129 ,Experiment: 5,Test Point: 21222B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21222B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21222B1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-10 222 18:16:15:129 ,Experiment: 5,Test Point: 21222B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21222B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2531.05,
     "max": 2531.05,
     "quality": "reported",
     "raw": "2531.048018",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 17,
     "max": 17,
     "quality": "reported",
     "raw": "17",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0797604,
     "max": 0.0797604,
     "quality": "reported",
     "raw": "0.079760368",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.44197,
     "max": 5.44197,
     "quality": "reported",
     "raw": "5.441972789",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 118.7,
     "max": 118.7,
     "quality": "reported",
     "raw": "118.7",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.665388,
     "max": 0.665388,
     "quality": "reported",
     "raw": "0.665388164",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/60",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21222 C1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 60,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21222C1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-10 222 19:00:58:657 ,Experiment: 5,Test Point: 21222C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21222C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21222C1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-10 222 19:00:58:657 ,Experiment: 5,Test Point: 21222C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21222C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2358.83,
     "max": 2358.83,
     "quality": "reported",
     "raw": "2358.832703",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "6",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0796896,
     "max": 0.0796896,
     "quality": "reported",
     "raw": "0.079689638",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.44197,
     "max": 5.44197,
     "quality": "reported",
     "raw": "5.441972789",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 54.6,
     "max": 54.6,
     "quality": "reported",
     "raw": "54.6",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.550591,
     "max": 0.550591,
     "quality": "reported",
     "raw": "0.550590842",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/61",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21222 C2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 61,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21222C2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-10 222 19:13:07:423 ,Experiment: 5,Test Point: 21222C2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21222C2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21222C2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-10 222 19:13:07:423 ,Experiment: 5,Test Point: 21222C2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21222C2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2358.63,
     "max": 2358.63,
     "quality": "reported",
     "raw": "2358.626362",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0796585,
     "max": 0.0796585,
     "quality": "reported",
     "raw": "0.079658522",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.62798,
     "max": 3.62798,
     "quality": "reported",
     "raw": "3.627981859",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 68.3,
     "max": 68.3,
     "quality": "reported",
     "raw": "68.3",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.550683,
     "max": 0.550683,
     "quality": "reported",
     "raw": "0.550683248",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/62",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21222 F1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 62,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21222F1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-10 222 19:51:13:248 ,Experiment: 5,Test Point: 21222F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21222F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21222F1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-10 222 19:51:13:248 ,Experiment: 5,Test Point: 21222F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21222F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1834.57,
     "max": 1834.57,
     "quality": "reported",
     "raw": "1834.567261",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0796309,
     "max": 0.0796309,
     "quality": "reported",
     "raw": "0.079630869",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.44197,
     "max": 5.44197,
     "quality": "reported",
     "raw": "5.441972789",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 26.2,
     "max": 26.2,
     "quality": "reported",
     "raw": "26.2",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.348768,
     "max": 0.348768,
     "quality": "reported",
     "raw": "0.348768288",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/63",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21222 F2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 63,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21222F2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-10 222 20:12:38:415 ,Experiment: 5,Test Point: 21222F2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21222F2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21222F2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-10 222 20:12:38:415 ,Experiment: 5,Test Point: 21222F2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21222F2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1834.52,
     "max": 1834.52,
     "quality": "reported",
     "raw": "1834.524346",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0796222,
     "max": 0.0796222,
     "quality": "reported",
     "raw": "0.079622244",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "No ignition",
     "quality": "reported",
     "raw": "No ignition",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.81399,
     "max": 1.81399,
     "quality": "reported",
     "raw": "1.81399093",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 26.7,
     "max": 26.7,
     "quality": "reported",
     "raw": "26.7",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.348792,
     "max": 0.348792,
     "quality": "reported",
     "raw": "0.348791814",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/64",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21228 A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 64,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228A1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 17:29:23:715 ,Experiment: 5,Test Point: 21228A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228A1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 17:29:23:715 ,Experiment: 5,Test Point: 21228A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2586.95,
     "max": 2586.95,
     "quality": "reported",
     "raw": "2586.94818",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "Inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0895,
     "max": 0.0895,
     "quality": "reported",
     "raw": "0.0895",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.44197,
     "max": 5.44197,
     "quality": "reported",
     "raw": "5.441972789",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 88.8,
     "max": 88.8,
     "quality": "reported",
     "raw": "88.8",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.640497,
     "max": 0.640497,
     "quality": "reported",
     "raw": "0.640496854",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/65",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21228 A2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 65,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228A2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 17:43:59:479 ,Experiment: 5,Test Point: 21228A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228A2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 17:43:59:479 ,Experiment: 5,Test Point: 21228A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2586.63,
     "max": 2586.63,
     "quality": "reported",
     "raw": "2586.633881",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 11,
     "max": 11,
     "quality": "reported",
     "raw": "11",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0894385,
     "max": 0.0894385,
     "quality": "reported",
     "raw": "0.089438516",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 9.06995,
     "max": 9.06995,
     "quality": "reported",
     "raw": "9.069954649",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 81.8,
     "max": 81.8,
     "quality": "reported",
     "raw": "81.8",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.640647,
     "max": 0.640647,
     "quality": "reported",
     "raw": "0.640647345",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/66",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21228 A3",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 66,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228A3_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 18:01:23:742 ,Experiment: 5,Test Point: 21228A3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228A3_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 18:01:23:742 ,Experiment: 5,Test Point: 21228A3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2586.02,
     "max": 2586.02,
     "quality": "reported",
     "raw": "2586.017969",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 12,
     "max": 12,
     "quality": "reported",
     "raw": "12",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0893183,
     "max": 0.0893183,
     "quality": "reported",
     "raw": "0.089318272",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.62798,
     "max": 3.62798,
     "quality": "reported",
     "raw": "3.627981859",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 126.5,
     "max": 126.5,
     "quality": "reported",
     "raw": "126.5",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.640942,
     "max": 0.640942,
     "quality": "reported",
     "raw": "0.640941893",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/67",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21228 A4",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 67,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228A4_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 18:13:36:915 ,Experiment: 5,Test Point: 21228A4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228A4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228A4_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 18:13:36:915 ,Experiment: 5,Test Point: 21228A4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228A4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2585.75,
     "max": 2585.75,
     "quality": "reported",
     "raw": "2585.748763",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 12,
     "max": 12,
     "quality": "reported",
     "raw": "12",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0892658,
     "max": 0.0892658,
     "quality": "reported",
     "raw": "0.089265815",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.81399,
     "max": 1.81399,
     "quality": "reported",
     "raw": "1.81399093",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 170.3,
     "max": 170.3,
     "quality": "reported",
     "raw": "170.3",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.64107,
     "max": 0.64107,
     "quality": "reported",
     "raw": "0.641070486",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/68",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21228 B1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 68,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228B1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 18:29:16:667 ,Experiment: 5,Test Point: 21228B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228B1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 18:29:16:667 ,Experiment: 5,Test Point: 21228B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2585.61,
     "max": 2585.61,
     "quality": "reported",
     "raw": "2585.61406",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 16,
     "max": 16,
     "quality": "reported",
     "raw": "16",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0892396,
     "max": 0.0892396,
     "quality": "reported",
     "raw": "0.089239591",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.44197,
     "max": 5.44197,
     "quality": "reported",
     "raw": "5.441972789",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 112.1,
     "max": 112.1,
     "quality": "reported",
     "raw": "112.1",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.641135,
     "max": 0.641135,
     "quality": "reported",
     "raw": "0.641134796",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/69",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21228 C1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 69,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228C1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 18:58:25:402 ,Experiment: 5,Test Point: 21228C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228C1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 18:58:25:402 ,Experiment: 5,Test Point: 21228C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2414.75,
     "max": 2414.75,
     "quality": "reported",
     "raw": "2414.746738",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0891347,
     "max": 0.0891347,
     "quality": "reported",
     "raw": "0.089134747",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.44197,
     "max": 5.44197,
     "quality": "reported",
     "raw": "5.441972789",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 62.4,
     "max": 62.4,
     "quality": "reported",
     "raw": "62.4",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.524037,
     "max": 0.524037,
     "quality": "reported",
     "raw": "0.524036865",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/70",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21228 C2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 70,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228C2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 19:15:37:357 ,Experiment: 5,Test Point: 21228C2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228C2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228C2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 19:15:37:357 ,Experiment: 5,Test Point: 21228C2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228C2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2414.4,
     "max": 2414.4,
     "quality": "reported",
     "raw": "2414.397018",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0890686,
     "max": 0.0890686,
     "quality": "reported",
     "raw": "0.089068575",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 9.06995,
     "max": 9.06995,
     "quality": "reported",
     "raw": "9.069954649",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 147.2,
     "max": 147.2,
     "quality": "reported",
     "raw": "147.2",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.524213,
     "max": 0.524213,
     "quality": "reported",
     "raw": "0.524213082",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/71",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21228 C3",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 71,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228C3_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 19:31:03:316 ,Experiment: 5,Test Point: 21228C3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228C3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228C3_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 19:31:03:316 ,Experiment: 5,Test Point: 21228C3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228C3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2409.56,
     "max": 2409.56,
     "quality": "reported",
     "raw": "2409.561834",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "7",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0881639,
     "max": 0.0881639,
     "quality": "reported",
     "raw": "0.088163914",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.62798,
     "max": 3.62798,
     "quality": "reported",
     "raw": "3.627981859",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 62,
     "max": 62,
     "quality": "reported",
     "raw": "62",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.526635,
     "max": 0.526635,
     "quality": "reported",
     "raw": "0.526635421",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/72",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21228 C4",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 72,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228C4_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 19:45:18:582 ,Experiment: 5,Test Point: 21228C4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228C4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228C4_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 19:45:18:582 ,Experiment: 5,Test Point: 21228C4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228C4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2409.35,
     "max": 2409.35,
     "quality": "reported",
     "raw": "2409.354503",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0881255,
     "max": 0.0881255,
     "quality": "reported",
     "raw": "0.088125544",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.81399,
     "max": 1.81399,
     "quality": "reported",
     "raw": "1.81399093",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 142.3,
     "max": 142.3,
     "quality": "reported",
     "raw": "142.3",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.526739,
     "max": 0.526739,
     "quality": "reported",
     "raw": "0.52673871",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/73",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21228 F1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 73,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228F1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 19:59:18:147 ,Experiment: 5,Test Point: 21228F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228F1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 19:59:18:147 ,Experiment: 5,Test Point: 21228F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1873.4,
     "max": 1873.4,
     "quality": "reported",
     "raw": "1873.400434",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 65,
     "max": 65,
     "quality": "reported",
     "raw": "65",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0881009,
     "max": 0.0881009,
     "quality": "reported",
     "raw": "0.088100881",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.44197,
     "max": 5.44197,
     "quality": "reported",
     "raw": "5.441972789",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 118.3,
     "max": 118.3,
     "quality": "reported",
     "raw": "118.3",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.327195,
     "max": 0.327195,
     "quality": "reported",
     "raw": "0.327195256",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/74",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21228 H1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 74,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228H1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 20:49:34:772 ,Experiment: 5,Test Point: 21228H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228H1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228H1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 20:49:34:772 ,Experiment: 5,Test Point: 21228H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228H1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2574.9,
     "max": 2574.9,
     "quality": "reported",
     "raw": "2574.902538",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0872023,
     "max": 0.0872023,
     "quality": "reported",
     "raw": "0.087202272",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.44197,
     "max": 5.44197,
     "quality": "reported",
     "raw": "5.441972789",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 77.9,
     "max": 77.9,
     "quality": "reported",
     "raw": "77.9",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.646176,
     "max": 0.646176,
     "quality": "reported",
     "raw": "0.646176337",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/75",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21228 H2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 75,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228H2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 21:03:26:009 ,Experiment: 5,Test Point: 21228H2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228H2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228H2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 21:03:26:009 ,Experiment: 5,Test Point: 21228H2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228H2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2574.34,
     "max": 2574.34,
     "quality": "reported",
     "raw": "2574.343536",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 15,
     "max": 15,
     "quality": "reported",
     "raw": "15",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0870985,
     "max": 0.0870985,
     "quality": "reported",
     "raw": "0.087098504",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.81399,
     "max": 1.81399,
     "quality": "reported",
     "raw": "1.81399093",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 182.6,
     "max": 182.6,
     "quality": "reported",
     "raw": "182.6",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.646436,
     "max": 0.646436,
     "quality": "reported",
     "raw": "0.646435546",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/76",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21228 J1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 76,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228J1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 21:25:20:372 ,Experiment: 5,Test Point: 21228J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228J1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228J1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 21:25:20:372 ,Experiment: 5,Test Point: 21228J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228J1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2574,
     "max": 2574,
     "quality": "reported",
     "raw": "2574",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 18,
     "max": 18,
     "quality": "reported",
     "raw": "18",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0870337,
     "max": 0.0870337,
     "quality": "reported",
     "raw": "0.087033671",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.81,
     "max": 1.81,
     "quality": "reported",
     "raw": "1.81",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 198.9,
     "max": 198.9,
     "quality": "reported",
     "raw": "198.9",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.6466,
     "max": 0.6466,
     "quality": "reported",
     "raw": "0.6466",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/77",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21228 K1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 77,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228K1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 21:42:43:752 ,Experiment: 5,Test Point: 21228K1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228K1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228K1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 21:42:43:752 ,Experiment: 5,Test Point: 21228K1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228K1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2402.94,
     "max": 2402.94,
     "quality": "reported",
     "raw": "2402.944454",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0869559,
     "max": 0.0869559,
     "quality": "reported",
     "raw": "0.086955901",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.44197,
     "max": 5.44197,
     "quality": "reported",
     "raw": "5.441972789",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 66.6,
     "max": 66.6,
     "quality": "reported",
     "raw": "66.6",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.529909,
     "max": 0.529909,
     "quality": "reported",
     "raw": "0.529908945",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/78",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21228 K2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 78,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228K2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 22:02:18:108 ,Experiment: 5,Test Point: 21228K2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228K2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228K2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 22:02:18:108 ,Experiment: 5,Test Point: 21228K2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228K2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2402.13,
     "max": 2402.13,
     "quality": "reported",
     "raw": "2402.127679",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 12,
     "max": 12,
     "quality": "reported",
     "raw": "12",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0868091,
     "max": 0.0868091,
     "quality": "reported",
     "raw": "0.086809142",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.81399,
     "max": 1.81399,
     "quality": "reported",
     "raw": "1.81399093",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 165.6,
     "max": 165.6,
     "quality": "reported",
     "raw": "165.6",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.53031,
     "max": 0.53031,
     "quality": "reported",
     "raw": "0.53030971",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/79",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21228 L1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 79,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228L1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 22:16:47:187 ,Experiment: 5,Test Point: 21228L1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228L1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228L1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 22:16:47:187 ,Experiment: 5,Test Point: 21228L1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228L1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1867.6,
     "max": 1867.6,
     "quality": "reported",
     "raw": "1867.59582",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 3,
     "max": 3,
     "quality": "reported",
     "raw": "3",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0867439,
     "max": 0.0867439,
     "quality": "reported",
     "raw": "0.086743943",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.62798,
     "max": 3.62798,
     "quality": "reported",
     "raw": "3.627981859",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 29.7,
     "max": 29.7,
     "quality": "reported",
     "raw": "29.7",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.330457,
     "max": 0.330457,
     "quality": "reported",
     "raw": "0.330457167",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/80",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21228 L2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 80,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228L2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 22:31:42:659 ,Experiment: 5,Test Point: 21228L2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228L2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21228L2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-16 228 22:31:42:659 ,Experiment: 5,Test Point: 21228L2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21228L2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1867.36,
     "max": 1867.36,
     "quality": "reported",
     "raw": "1867.357153",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 16,
     "max": 16,
     "quality": "reported",
     "raw": "16",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0866889,
     "max": 0.0866889,
     "quality": "reported",
     "raw": "0.086688885",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.44197,
     "max": 5.44197,
     "quality": "reported",
     "raw": "5.441972789",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 68.1,
     "max": 68.1,
     "quality": "reported",
     "raw": "68.1",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.330591,
     "max": 0.330591,
     "quality": "reported",
     "raw": "0.330590998",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/81",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21235 A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 81,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21235A1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-23 235 14:05:18:570 ,Experiment: 5,Test Point: 21235A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21235A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21235A1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-23 235 14:05:18:570 ,Experiment: 5,Test Point: 21235A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21235A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2861.46,
     "max": 2861.46,
     "quality": "reported",
     "raw": "2861.461152",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow then blue",
     "quality": "reported",
     "raw": "yellow then blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.2059,
     "max": 0.2059,
     "quality": "reported",
     "raw": "0.2059",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.44197,
     "max": 5.44197,
     "quality": "reported",
     "raw": "5.441972789",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 364.2,
     "max": 364.2,
     "quality": "reported",
     "raw": "364.2",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.451653,
     "max": 0.451653,
     "quality": "reported",
     "raw": "0.451652791",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/82",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21235 A2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 82,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21235A2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-23 235 14:20:49:179 ,Experiment: 5,Test Point: 21235A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21235A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21235A2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-23 235 14:20:49:179 ,Experiment: 5,Test Point: 21235A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21235A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2859.84,
     "max": 2859.84,
     "quality": "reported",
     "raw": "2859.843865",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow then blue",
     "quality": "reported",
     "raw": "yellow then blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.204389,
     "max": 0.204389,
     "quality": "reported",
     "raw": "0.204388716",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 9.06995,
     "max": 9.06995,
     "quality": "reported",
     "raw": "9.069954649",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 253.3,
     "max": 253.3,
     "quality": "reported",
     "raw": "253.3",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.453286,
     "max": 0.453286,
     "quality": "reported",
     "raw": "0.453285544",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/83",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21235 C1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 83,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21235C1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-23 235 14:33:13:753 ,Experiment: 5,Test Point: 21235C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21235C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21235C1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-23 235 14:33:13:753 ,Experiment: 5,Test Point: 21235C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21235C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2674.06,
     "max": 2674.06,
     "quality": "reported",
     "raw": "2674.062129",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.202126,
     "max": 0.202126,
     "quality": "reported",
     "raw": "0.202126356",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.62798,
     "max": 3.62798,
     "quality": "reported",
     "raw": "3.627981859",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 381.5,
     "max": 381.5,
     "quality": "reported",
     "raw": "381.5",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.34015,
     "max": 0.34015,
     "quality": "reported",
     "raw": "0.340149819",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/84",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21235 F1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 84,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21235F1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-23 235 14:46:27:407 ,Experiment: 5,Test Point: 21235F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21235F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21235F1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-23 235 14:46:27:407 ,Experiment: 5,Test Point: 21235F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21235F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2102.86,
     "max": 2102.86,
     "quality": "reported",
     "raw": "2102.864333",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.200883,
     "max": 0.200883,
     "quality": "reported",
     "raw": "0.200883448",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.81399,
     "max": 1.81399,
     "quality": "reported",
     "raw": "1.81399093",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 246.9,
     "max": 246.9,
     "quality": "reported",
     "raw": "246.9",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.184625,
     "max": 0.184625,
     "quality": "reported",
     "raw": "0.184625261",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/85",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21235 F2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 85,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21235F2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-23 235 15:07:39:868 ,Experiment: 5,Test Point: 21235F2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21235F2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21235F2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-23 235 15:07:39:868 ,Experiment: 5,Test Point: 21235F2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21235F2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2101.71,
     "max": 2101.71,
     "quality": "reported",
     "raw": "2101.707843",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.199695,
     "max": 0.199695,
     "quality": "reported",
     "raw": "0.199695339",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 9.06995,
     "max": 9.06995,
     "quality": "reported",
     "raw": "9.069954649",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 26,
     "max": 26,
     "quality": "reported",
     "raw": "26",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.185427,
     "max": 0.185427,
     "quality": "reported",
     "raw": "0.185427485",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/86",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21235 H1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 86,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21235H1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-23 235 15:20:40:837 ,Experiment: 5,Test Point: 21235H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21235H1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21235H1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-23 235 15:20:40:837 ,Experiment: 5,Test Point: 21235H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21235H1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1954.15,
     "max": 1954.15,
     "quality": "reported",
     "raw": "1954.1532",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "4",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.375,
     "max": 0.375,
     "quality": "reported",
     "raw": "0.375",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.199695,
     "max": 0.199695,
     "quality": "reported",
     "raw": "0.199695339",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.36049,
     "max": 1.36049,
     "quality": "reported",
     "raw": "1.360493197",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 55.2,
     "max": 55.2,
     "quality": "reported",
     "raw": "55.2",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.163831,
     "max": 0.163831,
     "quality": "reported",
     "raw": "0.163830715",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/87",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21235 J1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 87,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21235J1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-23 235 15:31:12:115 ,Experiment: 5,Test Point: 21235J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21235J1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21235J1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-23 235 15:31:12:115 ,Experiment: 5,Test Point: 21235J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21235J1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2006.68,
     "max": 2006.68,
     "quality": "reported",
     "raw": "2006.678395",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.199634,
     "max": 0.199634,
     "quality": "reported",
     "raw": "0.199633914",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.19,
     "max": 0.19,
     "quality": "reported",
     "raw": "0.19",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.81399,
     "max": 1.81399,
     "quality": "reported",
     "raw": "1.81399093",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 181.1,
     "max": 181.1,
     "quality": "reported",
     "raw": "181.1",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.171215,
     "max": 0.171215,
     "quality": "reported",
     "raw": "0.171215043",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/88",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21235 B1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 88,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21235B1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-23 235 15:53:36:571 ,Experiment: 5,Test Point: 21235B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21235B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21235B1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-23 235 15:53:36:571 ,Experiment: 5,Test Point: 21235B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21235B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2853.12,
     "max": 2853.12,
     "quality": "reported",
     "raw": "2853.118802",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 152,
     "max": 152,
     "quality": "reported",
     "raw": "152",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.19835,
     "max": 0.19835,
     "quality": "reported",
     "raw": "0.198350097",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.44197,
     "max": 5.44197,
     "quality": "reported",
     "raw": "5.441972789",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 411.6,
     "max": 411.6,
     "quality": "reported",
     "raw": "411.6",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.459955,
     "max": 0.459955,
     "quality": "reported",
     "raw": "0.4599553",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/89",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21235 K1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 89,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21235K1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-23 235 16:25:07:600 ,Experiment: 5,Test Point: 21235K1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21235K1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21235K1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-23 235 16:25:07:600 ,Experiment: 5,Test Point: 21235K1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21235K1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2849.54,
     "max": 2849.54,
     "quality": "reported",
     "raw": "2849.544458",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.195293,
     "max": 0.195293,
     "quality": "reported",
     "raw": "0.195292522",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.44197,
     "max": 5.44197,
     "quality": "reported",
     "raw": "5.441972789",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 400.7,
     "max": 400.7,
     "quality": "reported",
     "raw": "400.7",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.463424,
     "max": 0.463424,
     "quality": "reported",
     "raw": "0.463424197",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/90",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21235 L1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 90,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21235L1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-23 235 16:44:28:510 ,Experiment: 5,Test Point: 21235L1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21235L1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21235L1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-23 235 16:44:28:510 ,Experiment: 5,Test Point: 21235L1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21235L1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2846.37,
     "max": 2846.37,
     "quality": "reported",
     "raw": "2846.370643",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 127,
     "max": 127,
     "quality": "reported",
     "raw": "127",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.19266,
     "max": 0.19266,
     "quality": "reported",
     "raw": "0.192660203",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 9.06995,
     "max": 9.06995,
     "quality": "reported",
     "raw": "9.069954649",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 291,
     "max": 291,
     "quality": "reported",
     "raw": "291",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.466462,
     "max": 0.466462,
     "quality": "reported",
     "raw": "0.466461784",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/91",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21242 A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 91,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21242A1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-30 242 15:32:24:564 ,Experiment: 5,Test Point: 21242A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21242A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21242A1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-30 242 15:32:24:564 ,Experiment: 5,Test Point: 21242A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21242A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2978.37,
     "max": 2978.37,
     "quality": "reported",
     "raw": "2978.371796",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 12,
     "max": 12,
     "quality": "reported",
     "raw": "12",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow",
     "quality": "reported",
     "raw": "Yellow",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.4287,
     "max": 0.4287,
     "quality": "reported",
     "raw": "0.4287",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Terminated by burner temp hit the limit.",
     "quality": "reported",
     "raw": "Terminated by burner temp hit the limit.",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.44197,
     "max": 5.44197,
     "quality": "reported",
     "raw": "5.441972789",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 651.5,
     "max": 651.5,
     "quality": "reported",
     "raw": "651.5",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.305969,
     "max": 0.305969,
     "quality": "reported",
     "raw": "0.305968987",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/92",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21242 P1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 92,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21242P1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-30 242 15:47:50:426 ,Experiment: 5,Test Point: 21242P1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21242P1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21242P1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-30 242 15:47:50:426 ,Experiment: 5,Test Point: 21242P1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21242P1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2506.98,
     "max": 2506.98,
     "quality": "reported",
     "raw": "2506.980822",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 21,
     "max": 21,
     "quality": "reported",
     "raw": "21",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow",
     "quality": "reported",
     "raw": "Yellow",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.427799,
     "max": 0.427799,
     "quality": "reported",
     "raw": "0.427799337",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.44197,
     "max": 5.44197,
     "quality": "reported",
     "raw": "5.441972789",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 173.8,
     "max": 173.8,
     "quality": "reported",
     "raw": "173.8",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.14351,
     "max": 0.14351,
     "quality": "reported",
     "raw": "0.143510124",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/93",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21242 F2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 93,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21242F2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-30 242 17:00:25:932 ,Experiment: 5,Test Point: 21242F2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21242F2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21242F2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-30 242 17:00:25:932 ,Experiment: 5,Test Point: 21242F2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21242F2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2207.97,
     "max": 2207.97,
     "quality": "reported",
     "raw": "2207.969786",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.424514,
     "max": 0.424514,
     "quality": "reported",
     "raw": "0.424514159",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "F1 was aborted, and F2 did not ignite.",
     "quality": "reported",
     "raw": "F1 was aborted, and F2 did not ignite.",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.44197,
     "max": 5.44197,
     "quality": "reported",
     "raw": "5.441972789",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 25.6,
     "max": 25.6,
     "quality": "reported",
     "raw": "25.6",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.106732,
     "max": 0.106732,
     "quality": "reported",
     "raw": "0.106732291",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/94",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21242 F3",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 94,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21242F3_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-30 242 18:07:16:299 ,Experiment: 5,Test Point: 21242F3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21242F3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21242F3_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-30 242 18:07:16:299 ,Experiment: 5,Test Point: 21242F3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21242F3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2207.97,
     "max": 2207.97,
     "quality": "reported",
     "raw": "2207.969786",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.424514,
     "max": 0.424514,
     "quality": "reported",
     "raw": "0.424514159",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.44197,
     "max": 5.44197,
     "quality": "reported",
     "raw": "5.441972789",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 25.9,
     "max": 25.9,
     "quality": "reported",
     "raw": "25.9",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.106732,
     "max": 0.106732,
     "quality": "reported",
     "raw": "0.106732291",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/95",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21242 F4",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 95,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21242F4_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-30 242 18:21:23:172 ,Experiment: 5,Test Point: 21242F4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21242F4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21242F4_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-30 242 18:21:23:172 ,Experiment: 5,Test Point: 21242F4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21242F4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2207.97,
     "max": 2207.97,
     "quality": "reported",
     "raw": "2207.969786",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.424514,
     "max": 0.424514,
     "quality": "reported",
     "raw": "0.424514159",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.62798,
     "max": 3.62798,
     "quality": "reported",
     "raw": "3.627981859",
     "column": "O2 flow rate (mg/s)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.106732,
     "max": 0.106732,
     "quality": "reported",
     "raw": "0.106732291",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/96",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21242 P2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 96,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21242P2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-30 242 20:57:07:960 ,Experiment: 5,Test Point: 21242P2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 0,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21242P2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21242P2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-08-30 242 20:57:07:960 ,Experiment: 5,Test Point: 21242P2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 0,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21242P2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2506.23,
     "max": 2506.23,
     "quality": "reported",
     "raw": "2506.233979",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.424514,
     "max": 0.424514,
     "quality": "reported",
     "raw": "0.424514159",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Most data lost this day.",
     "quality": "reported",
     "raw": "Most data lost this day.",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.44197,
     "max": 5.44197,
     "quality": "reported",
     "raw": "5.441972789",
     "column": "O2 flow rate (mg/s)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.144273,
     "max": 0.144273,
     "quality": "reported",
     "raw": "0.144273053",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/97",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21256 A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 97,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256A1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 16:09:37:957 ,Experiment: 5,Test Point: 21256A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256A1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 16:09:37:957 ,Experiment: 5,Test Point: 21256A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2678.57,
     "max": 2678.57,
     "quality": "reported",
     "raw": "2678.571274",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow-blue",
     "quality": "reported",
     "raw": "Yellow-Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0881,
     "max": 0.0881,
     "quality": "reported",
     "raw": "0.0881",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.368,
     "max": 5.368,
     "quality": "reported",
     "raw": "5.368002409",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 102,
     "max": 102,
     "quality": "reported",
     "raw": "102",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.591766,
     "max": 0.591766,
     "quality": "reported",
     "raw": "0.591765812",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/98",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21256 A2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 98,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256A2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 16:42:31:162 ,Experiment: 5,Test Point: 21256A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256A2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 16:42:31:162 ,Experiment: 5,Test Point: 21256A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2678.33,
     "max": 2678.33,
     "quality": "reported",
     "raw": "2678.326663",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 11,
     "max": 11,
     "quality": "reported",
     "raw": "11",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow-blue",
     "quality": "reported",
     "raw": "Yellow-Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0880414,
     "max": 0.0880414,
     "quality": "reported",
     "raw": "0.088041351",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.57867,
     "max": 3.57867,
     "quality": "reported",
     "raw": "3.578668273",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 130.7,
     "max": 130.7,
     "quality": "reported",
     "raw": "130.7",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.591913,
     "max": 0.591913,
     "quality": "reported",
     "raw": "0.591912769",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/99",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21256 A3",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 99,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256A3_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 17:03:12:716 ,Experiment: 5,Test Point: 21256A3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256A3_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 17:03:12:716 ,Experiment: 5,Test Point: 21256A3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2678.13,
     "max": 2678.13,
     "quality": "reported",
     "raw": "2678.127192",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 11,
     "max": 11,
     "quality": "reported",
     "raw": "11",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow-blue",
     "quality": "reported",
     "raw": "Yellow-Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0879936,
     "max": 0.0879936,
     "quality": "reported",
     "raw": "0.087993574",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.78933,
     "max": 1.78933,
     "quality": "reported",
     "raw": "1.789334136",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 174.6,
     "max": 174.6,
     "quality": "reported",
     "raw": "174.6",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.592033,
     "max": 0.592033,
     "quality": "reported",
     "raw": "0.59203255",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/100",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21256 A4",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 100,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256A4_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 17:28:47:752 ,Experiment: 5,Test Point: 21256A4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256A4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256A4_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 17:28:47:752 ,Experiment: 5,Test Point: 21256A4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256A4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2678.03,
     "max": 2678.03,
     "quality": "reported",
     "raw": "2678.027398",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow-blue",
     "quality": "reported",
     "raw": "Yellow-Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.375,
     "max": 0.375,
     "quality": "reported",
     "raw": "0.375",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0879697,
     "max": 0.0879697,
     "quality": "reported",
     "raw": "0.087969688",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.342,
     "max": 1.342,
     "quality": "reported",
     "raw": "1.342000602",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 126.5,
     "max": 126.5,
     "quality": "reported",
     "raw": "126.5",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.592092,
     "max": 0.592092,
     "quality": "reported",
     "raw": "0.592092455",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/101",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21256 A5",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 101,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256A5_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 17:44:32:208 ,Experiment: 5,Test Point: 21256A5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256A5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256A5_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 17:44:32:208 ,Experiment: 5,Test Point: 21256A5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256A5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2677.99,
     "max": 2677.99,
     "quality": "reported",
     "raw": "2677.993369",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow-blue",
     "quality": "reported",
     "raw": "Yellow-Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0879615,
     "max": 0.0879615,
     "quality": "reported",
     "raw": "0.087961546",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 8.94667,
     "max": 8.94667,
     "quality": "reported",
     "raw": "8.946670681",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 84,
     "max": 84,
     "quality": "reported",
     "raw": "84",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.592113,
     "max": 0.592113,
     "quality": "reported",
     "raw": "0.59211288",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/102",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21256 C1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 102,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256C1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 18:06:09:396 ,Experiment: 5,Test Point: 21256C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256C1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 18:06:09:396 ,Experiment: 5,Test Point: 21256C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2509.35,
     "max": 2509.35,
     "quality": "reported",
     "raw": "2509.345147",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow-blue",
     "quality": "reported",
     "raw": "Yellow-Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0878639,
     "max": 0.0878639,
     "quality": "reported",
     "raw": "0.087863884",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.368,
     "max": 5.368,
     "quality": "reported",
     "raw": "5.368002409",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 64.1,
     "max": 64.1,
     "quality": "reported",
     "raw": "64.1",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.472162,
     "max": 0.472162,
     "quality": "reported",
     "raw": "0.472161891",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/103",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21256 F1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 103,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256F1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 18:22:17:906 ,Experiment: 5,Test Point: 21256F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256F1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 18:22:17:906 ,Experiment: 5,Test Point: 21256F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1956.11,
     "max": 1956.11,
     "quality": "reported",
     "raw": "1956.107065",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow-blue",
     "quality": "reported",
     "raw": "Yellow-Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.08779,
     "max": 0.08779,
     "quality": "reported",
     "raw": "0.087790043",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.368,
     "max": 5.368,
     "quality": "reported",
     "raw": "5.368002409",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 131.5,
     "max": 131.5,
     "quality": "reported",
     "raw": "131.5",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.281118,
     "max": 0.281118,
     "quality": "reported",
     "raw": "0.281118366",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/104",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21256 B1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 104,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256B1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 19:29:18:550 ,Experiment: 5,Test Point: 21256B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256B1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 19:29:18:550 ,Experiment: 5,Test Point: 21256B1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2673.43,
     "max": 2673.43,
     "quality": "reported",
     "raw": "2673.425067",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 13,
     "max": 13,
     "quality": "reported",
     "raw": "13",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow-blue",
     "quality": "reported",
     "raw": "Yellow-Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0868801,
     "max": 0.0868801,
     "quality": "reported",
     "raw": "0.0868801",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.368,
     "max": 5.368,
     "quality": "reported",
     "raw": "5.368002409",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 111.7,
     "max": 111.7,
     "quality": "reported",
     "raw": "111.7",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.594841,
     "max": 0.594841,
     "quality": "reported",
     "raw": "0.594841136",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/105",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21256 C2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 105,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256C2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 19:58:40:562 ,Experiment: 5,Test Point: 21256C2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256C2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256C2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 19:58:40:562 ,Experiment: 5,Test Point: 21256C2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256C2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2504.93,
     "max": 2504.93,
     "quality": "reported",
     "raw": "2504.933499",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow-blue",
     "quality": "reported",
     "raw": "Yellow-Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0867959,
     "max": 0.0867959,
     "quality": "reported",
     "raw": "0.086795918",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "No nitrogen flowed. This repeats A3.",
     "quality": "reported",
     "raw": "No nitrogen flowed. This repeats A3.",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.78933,
     "max": 1.78933,
     "quality": "reported",
     "raw": "1.789334136",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 154.7,
     "max": 154.7,
     "quality": "reported",
     "raw": "154.7",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.474949,
     "max": 0.474949,
     "quality": "reported",
     "raw": "0.474949057",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/106",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21256 H1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 106,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256H1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 20:59:02:611 ,Experiment: 5,Test Point: 21256H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256H1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256H1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 20:59:02:611 ,Experiment: 5,Test Point: 21256H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256H1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2585.92,
     "max": 2585.92,
     "quality": "reported",
     "raw": "2585.922171",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "7",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow-blue",
     "quality": "reported",
     "raw": "Yellow-Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.07,
     "max": 0.07,
     "quality": "reported",
     "raw": "0.07",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.368,
     "max": 5.368,
     "quality": "reported",
     "raw": "5.368002409",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 79.2,
     "max": 79.2,
     "quality": "reported",
     "raw": "79.2",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.64183,
     "max": 0.64183,
     "quality": "reported",
     "raw": "0.641830412",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/107",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21256 H2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 107,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256H2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 21:15:30:366 ,Experiment: 5,Test Point: 21256H2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256H2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256H2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 21:15:30:366 ,Experiment: 5,Test Point: 21256H2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256H2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2585.66,
     "max": 2585.66,
     "quality": "reported",
     "raw": "2585.658415",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "7",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow-blue",
     "quality": "reported",
     "raw": "Yellow-Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0699586,
     "max": 0.0699586,
     "quality": "reported",
     "raw": "0.069958563",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.57867,
     "max": 3.57867,
     "quality": "reported",
     "raw": "3.578668273",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 88.8,
     "max": 88.8,
     "quality": "reported",
     "raw": "88.8",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.641957,
     "max": 0.641957,
     "quality": "reported",
     "raw": "0.641957003",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/108",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21256 H3",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 108,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256H3_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 21:38:28:414 ,Experiment: 5,Test Point: 21256H3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256H3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256H3_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 21:38:28:414 ,Experiment: 5,Test Point: 21256H3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256H3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2585.48,
     "max": 2585.48,
     "quality": "reported",
     "raw": "2585.482433",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow-blue",
     "quality": "reported",
     "raw": "Yellow-Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0699309,
     "max": 0.0699309,
     "quality": "reported",
     "raw": "0.069930943",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.78933,
     "max": 1.78933,
     "quality": "reported",
     "raw": "1.789334136",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 100.6,
     "max": 100.6,
     "quality": "reported",
     "raw": "100.6",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.642041,
     "max": 0.642041,
     "quality": "reported",
     "raw": "0.642041417",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/109",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21256 H4",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 109,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256H4_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 21:57:29:973 ,Experiment: 5,Test Point: 21256H4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256H4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256H4_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 21:57:29:973 ,Experiment: 5,Test Point: 21256H4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256H4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2585.42,
     "max": 2585.42,
     "quality": "reported",
     "raw": "2585.419553",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 3,
     "max": 3,
     "quality": "reported",
     "raw": "3",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow-blue",
     "quality": "reported",
     "raw": "Yellow-Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.375,
     "max": 0.375,
     "quality": "reported",
     "raw": "0.375",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0699211,
     "max": 0.0699211,
     "quality": "reported",
     "raw": "0.069921079",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.342,
     "max": 1.342,
     "quality": "reported",
     "raw": "1.342000602",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 75.4,
     "max": 75.4,
     "quality": "reported",
     "raw": "75.4",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.642072,
     "max": 0.642072,
     "quality": "reported",
     "raw": "0.642071569",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/110",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21256 H5",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 110,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256H5_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 22:15:00:016 ,Experiment: 5,Test Point: 21256H5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256H5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256H5_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 22:15:00:016 ,Experiment: 5,Test Point: 21256H5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256H5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2585.39,
     "max": 2585.39,
     "quality": "reported",
     "raw": "2585.391251",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "7",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow-blue",
     "quality": "reported",
     "raw": "Yellow-Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0699166,
     "max": 0.0699166,
     "quality": "reported",
     "raw": "0.06991664",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 8.94667,
     "max": 8.94667,
     "quality": "reported",
     "raw": "8.946670681",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 68.9,
     "max": 68.9,
     "quality": "reported",
     "raw": "68.9",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.642085,
     "max": 0.642085,
     "quality": "reported",
     "raw": "0.642085139",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/111",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21256 K1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 111,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256K1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 22:31:00:085 ,Experiment: 5,Test Point: 21256K1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256K1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256K1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 22:31:00:085 ,Experiment: 5,Test Point: 21256K1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256K1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2415.93,
     "max": 2415.93,
     "quality": "reported",
     "raw": "2415.926417",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "4",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow-blue",
     "quality": "reported",
     "raw": "Yellow-Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0698476,
     "max": 0.0698476,
     "quality": "reported",
     "raw": "0.069847622",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.368,
     "max": 5.368,
     "quality": "reported",
     "raw": "5.368002409",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 42.7,
     "max": 42.7,
     "quality": "reported",
     "raw": "42.7",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.525018,
     "max": 0.525018,
     "quality": "reported",
     "raw": "0.525017815",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/112",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21256 M1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 112,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256M1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 22:45:11:344 ,Experiment: 5,Test Point: 21256M1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256M1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256M1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 22:45:11:344 ,Experiment: 5,Test Point: 21256M1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256M1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1879.24,
     "max": 1879.24,
     "quality": "reported",
     "raw": "1879.235391",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0698186,
     "max": 0.0698186,
     "quality": "reported",
     "raw": "0.069818566",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Flash",
     "quality": "reported",
     "raw": "Flash",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.368,
     "max": 5.368,
     "quality": "reported",
     "raw": "5.368002409",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 25.9,
     "max": 25.9,
     "quality": "reported",
     "raw": "25.9",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.325704,
     "max": 0.325704,
     "quality": "reported",
     "raw": "0.325704148",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/113",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21256 J1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 113,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256J1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 23:09:01:310 ,Experiment: 5,Test Point: 21256J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256J1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21256J1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-13 256 23:09:01:310 ,Experiment: 5,Test Point: 21256J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21256J1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2584.69,
     "max": 2584.69,
     "quality": "reported",
     "raw": "2584.689618",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "7",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0698068,
     "max": 0.0698068,
     "quality": "reported",
     "raw": "0.069806779",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.368,
     "max": 5.368,
     "quality": "reported",
     "raw": "5.368002409",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 75.5,
     "max": 75.5,
     "quality": "reported",
     "raw": "75.5",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 220.66,
     "max": 220.66,
     "quality": "reported",
     "raw": "2.2066",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.642421,
     "max": 0.642421,
     "quality": "reported",
     "raw": "0.642421223",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/114",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21265 A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 114,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265A1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 13:34:50:690 ,Experiment: 5,Test Point: 21265A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265A1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 13:34:50:690 ,Experiment: 5,Test Point: 21265A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2493.35,
     "max": 2493.35,
     "quality": "reported",
     "raw": "2493.345063",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "6",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow-blue",
     "quality": "reported",
     "raw": "Yellow-Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.058,
     "max": 0.058,
     "quality": "reported",
     "raw": "0.058",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.368,
     "max": 5.368,
     "quality": "reported",
     "raw": "5.368002409",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 75.8,
     "max": 75.8,
     "quality": "reported",
     "raw": "75.8",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.681202,
     "max": 0.681202,
     "quality": "reported",
     "raw": "0.681202374",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/115",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21265 A2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 115,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265A2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 13:47:22:832 ,Experiment: 5,Test Point: 21265A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265A2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 13:47:22:832 ,Experiment: 5,Test Point: 21265A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2493.14,
     "max": 2493.14,
     "quality": "reported",
     "raw": "2493.13738",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow-blue",
     "quality": "reported",
     "raw": "Yellow-Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0579779,
     "max": 0.0579779,
     "quality": "reported",
     "raw": "0.057977904",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.57867,
     "max": 3.57867,
     "quality": "reported",
     "raw": "3.578668273",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 81.7,
     "max": 81.7,
     "quality": "reported",
     "raw": "81.7",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.68128,
     "max": 0.68128,
     "quality": "reported",
     "raw": "0.681280262",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/116",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21265 A3",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 116,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265A3_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 13:57:55:909 ,Experiment: 5,Test Point: 21265A3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265A3_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 13:57:55:909 ,Experiment: 5,Test Point: 21265A3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2493.02,
     "max": 2493.02,
     "quality": "reported",
     "raw": "2493.021936",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow-blue",
     "quality": "reported",
     "raw": "Yellow-Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0579656,
     "max": 0.0579656,
     "quality": "reported",
     "raw": "0.057965629",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Flash",
     "quality": "reported",
     "raw": "Flash",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.78933,
     "max": 1.78933,
     "quality": "reported",
     "raw": "1.789334136",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 74.2,
     "max": 74.2,
     "quality": "reported",
     "raw": "74.2",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.681324,
     "max": 0.681324,
     "quality": "reported",
     "raw": "0.68132354",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/117",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21265 A4",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 117,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265A4_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 14:08:36:575 ,Experiment: 5,Test Point: 21265A4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265A4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265A4_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 14:08:36:575 ,Experiment: 5,Test Point: 21265A4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265A4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2493.01,
     "max": 2493.01,
     "quality": "reported",
     "raw": "2493.010389",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow-blue",
     "quality": "reported",
     "raw": "Yellow-Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0579644,
     "max": 0.0579644,
     "quality": "reported",
     "raw": "0.057964402",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Flash",
     "quality": "reported",
     "raw": "Flash",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.684,
     "max": 2.684,
     "quality": "reported",
     "raw": "2.684001204",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 91.3,
     "max": 91.3,
     "quality": "reported",
     "raw": "91.3",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.681328,
     "max": 0.681328,
     "quality": "reported",
     "raw": "0.681327868",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/118",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21265 A5",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 118,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265A5_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 14:36:11:728 ,Experiment: 5,Test Point: 21265A5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265A5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265A5_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 14:36:11:728 ,Experiment: 5,Test Point: 21265A5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265A5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2492.92,
     "max": 2492.92,
     "quality": "reported",
     "raw": "2492.923773",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow-blue",
     "quality": "reported",
     "raw": "Yellow-Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0579552,
     "max": 0.0579552,
     "quality": "reported",
     "raw": "0.057955197",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 8.94667,
     "max": 8.94667,
     "quality": "reported",
     "raw": "8.946670681",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 69.2,
     "max": 69.2,
     "quality": "reported",
     "raw": "69.2",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.68136,
     "max": 0.68136,
     "quality": "reported",
     "raw": "0.681360329",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/119",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21265 C1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 119,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265C1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 15:02:56:882 ,Experiment: 5,Test Point: 21265C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265C1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 15:02:56:882 ,Experiment: 5,Test Point: 21265C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2320.74,
     "max": 2320.74,
     "quality": "reported",
     "raw": "2320.742601",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 3,
     "max": 3,
     "quality": "reported",
     "raw": "3",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0579061,
     "max": 0.0579061,
     "quality": "reported",
     "raw": "0.057906116",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.368,
     "max": 5.368,
     "quality": "reported",
     "raw": "5.368002409",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 38.5,
     "max": 38.5,
     "quality": "reported",
     "raw": "38.5",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.568477,
     "max": 0.568477,
     "quality": "reported",
     "raw": "0.568476604",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/120",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21265 C2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 120,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265C2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 15:21:03:336 ,Experiment: 5,Test Point: 21265C2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265C2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265C2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 15:21:03:336 ,Experiment: 5,Test Point: 21265C2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265C2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2320.61,
     "max": 2320.61,
     "quality": "reported",
     "raw": "2320.614876",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0578928,
     "max": 0.0578928,
     "quality": "reported",
     "raw": "0.057892836",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 8.94667,
     "max": 8.94667,
     "quality": "reported",
     "raw": "8.946670681",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 45.5,
     "max": 45.5,
     "quality": "reported",
     "raw": "45.5",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.56853,
     "max": 0.56853,
     "quality": "reported",
     "raw": "0.568529571",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/121",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21265 C3",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 121,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265C3_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 15:34:09:119 ,Experiment: 5,Test Point: 21265C3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265C3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265C3_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 15:34:09:119 ,Experiment: 5,Test Point: 21265C3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265C3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2320.26,
     "max": 2320.26,
     "quality": "reported",
     "raw": "2320.259887",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.057856,
     "max": 0.057856,
     "quality": "reported",
     "raw": "0.057855959",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.57867,
     "max": 3.57867,
     "quality": "reported",
     "raw": "3.578668273",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 38.4,
     "max": 38.4,
     "quality": "reported",
     "raw": "38.4",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.568677,
     "max": 0.568677,
     "quality": "reported",
     "raw": "0.568676718",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/122",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21265 F1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 122,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265F1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 16:05:05:864 ,Experiment: 5,Test Point: 21265F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265F1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 16:05:05:864 ,Experiment: 5,Test Point: 21265F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1807,
     "max": 1807,
     "quality": "reported",
     "raw": "1807",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0578501,
     "max": 0.0578501,
     "quality": "reported",
     "raw": "0.057850059",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.37,
     "max": 5.37,
     "quality": "reported",
     "raw": "5.37",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 26,
     "max": 26,
     "quality": "reported",
     "raw": "26",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.3655,
     "max": 0.3655,
     "quality": "reported",
     "raw": "0.3655",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/123",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21265 F2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 123,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265F2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 16:20:03:522 ,Experiment: 5,Test Point: 21265F2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265F2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265F2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 16:20:03:522 ,Experiment: 5,Test Point: 21265F2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265F2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1807,
     "max": 1807,
     "quality": "reported",
     "raw": "1807",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0578466,
     "max": 0.0578466,
     "quality": "reported",
     "raw": "0.057846597",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Not spherical shape flame",
     "quality": "reported",
     "raw": "Not spherical shape flame",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 8.95,
     "max": 8.95,
     "quality": "reported",
     "raw": "8.95",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 124.7,
     "max": 124.7,
     "quality": "reported",
     "raw": "124.7",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.3655,
     "max": 0.3655,
     "quality": "reported",
     "raw": "0.3655",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/124",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21265 F3",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 124,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265F3_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 17:00:38:948 ,Experiment: 5,Test Point: 21265F3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265F3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265F3_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 17:00:38:948 ,Experiment: 5,Test Point: 21265F3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265F3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1801,
     "max": 1801,
     "quality": "reported",
     "raw": "1801",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0570914,
     "max": 0.0570914,
     "quality": "reported",
     "raw": "0.057091447",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "No ignition",
     "quality": "reported",
     "raw": "No ignition",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.58,
     "max": 3.58,
     "quality": "reported",
     "raw": "3.58",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 26,
     "max": 26,
     "quality": "reported",
     "raw": "26",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.3684,
     "max": 0.3684,
     "quality": "reported",
     "raw": "0.3684",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/125",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21265 F4",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 125,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265F4_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 17:14:20:518 ,Experiment: 5,Test Point: 21265F4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265F4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265F4_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 17:14:20:518 ,Experiment: 5,Test Point: 21265F4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265F4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1801,
     "max": 1801,
     "quality": "reported",
     "raw": "1801",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0570914,
     "max": 0.0570914,
     "quality": "reported",
     "raw": "0.057091447",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "No ignition",
     "quality": "reported",
     "raw": "No ignition",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 3.58,
     "max": 3.58,
     "quality": "reported",
     "raw": "3.58",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 26.2,
     "max": 26.2,
     "quality": "reported",
     "raw": "26.2",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.3684,
     "max": 0.3684,
     "quality": "reported",
     "raw": "0.3684",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/126",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21265 H1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 126,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265H1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 17:34:13:389 ,Experiment: 5,Test Point: 21265H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265H1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265H1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 17:34:13:389 ,Experiment: 5,Test Point: 21265H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265H1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2209,
     "max": 2209,
     "quality": "reported",
     "raw": "2209",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0570914,
     "max": 0.0570914,
     "quality": "reported",
     "raw": "0.057091447",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.37,
     "max": 5.37,
     "quality": "reported",
     "raw": "5.37",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 34.1,
     "max": 34.1,
     "quality": "reported",
     "raw": "34.1",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.5198,
     "max": 0.5198,
     "quality": "reported",
     "raw": "0.5198",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/127",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21265 H2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 127,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265H2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 17:50:01:947 ,Experiment: 5,Test Point: 21265H2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265H2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265H2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 17:50:01:947 ,Experiment: 5,Test Point: 21265H2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265H2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2209,
     "max": 2209,
     "quality": "reported",
     "raw": "2209",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0570866,
     "max": 0.0570866,
     "quality": "reported",
     "raw": "0.057086602",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 8.95,
     "max": 8.95,
     "quality": "reported",
     "raw": "8.95",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 135,
     "max": 135,
     "quality": "reported",
     "raw": "135",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.5198,
     "max": 0.5198,
     "quality": "reported",
     "raw": "0.5198",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/128",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21265 J1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 128,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265J1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 18:20:32:177 ,Experiment: 5,Test Point: 21265J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265J1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265J1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 18:20:32:177 ,Experiment: 5,Test Point: 21265J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265J1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2427.15,
     "max": 2427.15,
     "quality": "reported",
     "raw": "2427.146039",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "6",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0565562,
     "max": 0.0565562,
     "quality": "reported",
     "raw": "0.056556159",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 8.94667,
     "max": 8.94667,
     "quality": "reported",
     "raw": "8.946670681",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 56.9,
     "max": 56.9,
     "quality": "reported",
     "raw": "56.9",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.647511,
     "max": 0.647511,
     "quality": "reported",
     "raw": "0.647510818",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/129",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21265 K1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 129,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265K1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 18:50:30:398 ,Experiment: 5,Test Point: 21265K1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265K1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265K1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 18:50:30:398 ,Experiment: 5,Test Point: 21265K1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265K1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2260.71,
     "max": 2260.71,
     "quality": "reported",
     "raw": "2260.711549",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0565174,
     "max": 0.0565174,
     "quality": "reported",
     "raw": "0.056517425",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 8.94667,
     "max": 8.94667,
     "quality": "reported",
     "raw": "8.946670681",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 43.7,
     "max": 43.7,
     "quality": "reported",
     "raw": "43.7",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.549787,
     "max": 0.549787,
     "quality": "reported",
     "raw": "0.549786733",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/130",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21265 H3",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 130,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265H3_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 19:05:09:161 ,Experiment: 5,Test Point: 21265H3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265H3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21265H3_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-22 265 19:05:09:161 ,Experiment: 5,Test Point: 21265H3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21265H3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2203.07,
     "max": 2203.07,
     "quality": "reported",
     "raw": "2203.074582",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 107,
     "max": 107,
     "quality": "reported",
     "raw": "107",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.0564793,
     "max": 0.0564793,
     "quality": "reported",
     "raw": "0.056479312",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 8.94667,
     "max": 8.94667,
     "quality": "reported",
     "raw": "8.946670681",
     "column": "O2 flow rate (mg/s)"
    },
    "pressure_kpa": {
     "min": 330.99,
     "max": 330.99,
     "quality": "reported",
     "raw": "3.3099",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.522328,
     "max": 0.522328,
     "quality": "reported",
     "raw": "0.522327593",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/131",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21270 A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 131,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21270A1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-27 270 18:50:20:920 ,Experiment: 5,Test Point: 21270A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21270A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21270A1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-27 270 18:50:20:920 ,Experiment: 5,Test Point: 21270A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21270A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2872.8,
     "max": 2872.8,
     "quality": "reported",
     "raw": "2872.801057",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.1749,
     "max": 0.1749,
     "quality": "reported",
     "raw": "0.1749",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.37,
     "max": 5.37,
     "quality": "reported",
     "raw": "5.37",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 328.9,
     "max": 328.9,
     "quality": "reported",
     "raw": "328.9",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.442088,
     "max": 0.442088,
     "quality": "reported",
     "raw": "0.442088137",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/132",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21270 A2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 132,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21270A2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-27 270 19:02:06:889 ,Experiment: 5,Test Point: 21270A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21270A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21270A2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-27 270 19:02:06:889 ,Experiment: 5,Test Point: 21270A2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21270A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2871.53,
     "max": 2871.53,
     "quality": "reported",
     "raw": "2871.533096",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 90,
     "max": 90,
     "quality": "reported",
     "raw": "90",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.173778,
     "max": 0.173778,
     "quality": "reported",
     "raw": "0.173778305",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 8.95,
     "max": 8.95,
     "quality": "reported",
     "raw": "8.95",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 240.9,
     "max": 240.9,
     "quality": "reported",
     "raw": "240.9",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.443425,
     "max": 0.443425,
     "quality": "reported",
     "raw": "0.443425062",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/133",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21270 A3",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 133,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21270A3_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-27 270 19:13:52:777 ,Experiment: 5,Test Point: 21270A3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21270A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21270A3_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-27 270 19:13:52:777 ,Experiment: 5,Test Point: 21270A3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21270A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2868.32,
     "max": 2868.32,
     "quality": "reported",
     "raw": "2868.31586",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 35,
     "max": 35,
     "quality": "reported",
     "raw": "35",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.171002,
     "max": 0.171002,
     "quality": "reported",
     "raw": "0.171001571",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.68,
     "max": 2.68,
     "quality": "reported",
     "raw": "2.68",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 460.1,
     "max": 460.1,
     "quality": "reported",
     "raw": "460.1",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.446782,
     "max": 0.446782,
     "quality": "reported",
     "raw": "0.446781564",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/134",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21270 A4",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 134,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21270A4_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-27 270 19:24:37:254 ,Experiment: 5,Test Point: 21270A4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21270A4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21270A4_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-27 270 19:24:37:254 ,Experiment: 5,Test Point: 21270A4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21270A4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2867.93,
     "max": 2867.93,
     "quality": "reported",
     "raw": "2867.933483",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 90,
     "max": 90,
     "quality": "reported",
     "raw": "90",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.13,
     "max": 1.13,
     "quality": "reported",
     "raw": "1.13",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.170678,
     "max": 0.170678,
     "quality": "reported",
     "raw": "0.170677992",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 4.03,
     "max": 4.03,
     "quality": "reported",
     "raw": "4.03",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 433.3,
     "max": 433.3,
     "quality": "reported",
     "raw": "433.3",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.447177,
     "max": 0.447177,
     "quality": "reported",
     "raw": "0.447177124",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/135",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21270 C1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 135,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21270C1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-27 270 19:37:23:221 ,Experiment: 5,Test Point: 21270C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21270C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21270C1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-27 270 19:37:23:221 ,Experiment: 5,Test Point: 21270C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21270C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2681.67,
     "max": 2681.67,
     "quality": "reported",
     "raw": "2681.669686",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 70,
     "max": 70,
     "quality": "reported",
     "raw": "70",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.50",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.16943,
     "max": 0.16943,
     "quality": "reported",
     "raw": "0.169429945",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.37,
     "max": 5.37,
     "quality": "reported",
     "raw": "5.37",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 210.4,
     "max": 210.4,
     "quality": "reported",
     "raw": "210.4",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.333796,
     "max": 0.333796,
     "quality": "reported",
     "raw": "0.333795689",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/136",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21270 H1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 136,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21270H1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-27 270 20:11:43:845 ,Experiment: 5,Test Point: 21270H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21270H1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21270H1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-27 270 20:11:43:845 ,Experiment: 5,Test Point: 21270H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21270H1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2822.86,
     "max": 2822.86,
     "quality": "reported",
     "raw": "2822.860276",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 51,
     "max": 51,
     "quality": "reported",
     "raw": "51",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.50",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.14,
     "max": 0.14,
     "quality": "reported",
     "raw": "0.14",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.37,
     "max": 5.37,
     "quality": "reported",
     "raw": "5.37",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 244.3,
     "max": 244.3,
     "quality": "reported",
     "raw": "244.3",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.489451,
     "max": 0.489451,
     "quality": "reported",
     "raw": "0.489451071",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/137",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21270 H2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 137,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21270H2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-27 270 20:23:55:529 ,Experiment: 5,Test Point: 21270H2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21270H2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21270H2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-27 270 20:23:55:529 ,Experiment: 5,Test Point: 21270H2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21270H2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2821.33,
     "max": 2821.33,
     "quality": "reported",
     "raw": "2821.334066",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 43,
     "max": 43,
     "quality": "reported",
     "raw": "43",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.139163,
     "max": 0.139163,
     "quality": "reported",
     "raw": "0.139163137",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.68,
     "max": 2.68,
     "quality": "reported",
     "raw": "2.68",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 454.6,
     "max": 454.6,
     "quality": "reported",
     "raw": "454.6",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.490754,
     "max": 0.490754,
     "quality": "reported",
     "raw": "0.490753924",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/138",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21270 H3",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 138,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21270H3_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-27 270 20:34:32:003 ,Experiment: 5,Test Point: 21270H3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21270H3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21270H3_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-27 270 20:34:32:003 ,Experiment: 5,Test Point: 21270H3,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21270H3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2820.69,
     "max": 2820.69,
     "quality": "reported",
     "raw": "2820.685933",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 43,
     "max": 43,
     "quality": "reported",
     "raw": "43",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.13,
     "max": 1.13,
     "quality": "reported",
     "raw": "1.13",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.138811,
     "max": 0.138811,
     "quality": "reported",
     "raw": "0.138810842",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 4.03,
     "max": 4.03,
     "quality": "reported",
     "raw": "4.03",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 352.5,
     "max": 352.5,
     "quality": "reported",
     "raw": "352.5",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.491305,
     "max": 0.491305,
     "quality": "reported",
     "raw": "0.491305077",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/139",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21270 H4",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 139,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21270H4_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-27 270 20:48:34:263 ,Experiment: 5,Test Point: 21270H4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21270H4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21270H4_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-27 270 20:48:34:263 ,Experiment: 5,Test Point: 21270H4,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21270H4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2819.71,
     "max": 2819.71,
     "quality": "reported",
     "raw": "2819.705144",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 83,
     "max": 83,
     "quality": "reported",
     "raw": "83",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.50",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.138281,
     "max": 0.138281,
     "quality": "reported",
     "raw": "0.138281183",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 8.95,
     "max": 8.95,
     "quality": "reported",
     "raw": "8.95",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 217,
     "max": 217,
     "quality": "reported",
     "raw": "217",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.492137,
     "max": 0.492137,
     "quality": "reported",
     "raw": "0.492136729",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/140",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21270 H5",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 140,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21270H5_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-27 270 21:00:32:635 ,Experiment: 5,Test Point: 21270H5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21270H5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21270H5_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-09-27 270 21:00:32:635 ,Experiment: 5,Test Point: 21270H5,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21270H5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2815.47,
     "max": 2815.47,
     "quality": "reported",
     "raw": "2815.468657",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 46,
     "max": 46,
     "quality": "reported",
     "raw": "46",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.31,
     "max": 1.31,
     "quality": "reported",
     "raw": "1.31",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.13604,
     "max": 0.13604,
     "quality": "reported",
     "raw": "0.136039791",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 4.69,
     "max": 4.69,
     "quality": "reported",
     "raw": "4.69",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 260.4,
     "max": 260.4,
     "quality": "reported",
     "raw": "260.4",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 110.33,
     "max": 110.33,
     "quality": "reported",
     "raw": "1.1033",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.495697,
     "max": 0.495697,
     "quality": "reported",
     "raw": "0.495696773",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/141",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21277 A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 141,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277A1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 18:00:25:457 ,Experiment: 5,Test Point: 21277A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277A1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 18:00:25:457 ,Experiment: 5,Test Point: 21277A1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2977.82,
     "max": 2977.82,
     "quality": "reported",
     "raw": "2977.816828",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 12,
     "max": 12,
     "quality": "reported",
     "raw": "12",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow",
     "quality": "reported",
     "raw": "Yellow",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3617,
     "max": 0.3617,
     "quality": "reported",
     "raw": "0.3617",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "hit the temperature limit",
     "quality": "reported",
     "raw": "hit the temperature limit",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.368,
     "max": 5.368,
     "quality": "reported",
     "raw": "5.368002409",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 529.3,
     "max": 529.3,
     "quality": "reported",
     "raw": "529.3",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.309352,
     "max": 0.309352,
     "quality": "reported",
     "raw": "0.309352082",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/142",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21277 H1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 142,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277H1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 18:13:02:627 ,Experiment: 5,Test Point: 21277H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277H1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277H1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 18:13:02:627 ,Experiment: 5,Test Point: 21277H1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277H1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2788.03,
     "max": 2788.03,
     "quality": "reported",
     "raw": "2788.034113",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 17,
     "max": 17,
     "quality": "reported",
     "raw": "17",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow",
     "quality": "reported",
     "raw": "Yellow",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.360955,
     "max": 0.360955,
     "quality": "reported",
     "raw": "0.360954674",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "hit the temperature limit",
     "quality": "reported",
     "raw": "hit the temperature limit",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.368,
     "max": 5.368,
     "quality": "reported",
     "raw": "5.368002409",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 462.1,
     "max": 462.1,
     "quality": "reported",
     "raw": "462.1",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.216386,
     "max": 0.216386,
     "quality": "reported",
     "raw": "0.216385803",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/143",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21277 J1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 143,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277J1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 18:25:44:810 ,Experiment: 5,Test Point: 21277J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277J1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277J1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 18:25:44:810 ,Experiment: 5,Test Point: 21277J1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277J1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2210.03,
     "max": 2210.03,
     "quality": "reported",
     "raw": "2210.030184",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.35943,
     "max": 0.35943,
     "quality": "reported",
     "raw": "0.359429956",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "No ignition",
     "quality": "reported",
     "raw": "No ignition",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.368,
     "max": 5.368,
     "quality": "reported",
     "raw": "5.368002409",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 25.8,
     "max": 25.8,
     "quality": "reported",
     "raw": "25.8",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.107934,
     "max": 0.107934,
     "quality": "reported",
     "raw": "0.107933674",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/144",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21277 K1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 144,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277K1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 18:37:04:482 ,Experiment: 5,Test Point: 21277K1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277K1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277K1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 18:37:04:482 ,Experiment: 5,Test Point: 21277K1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277K1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2507.22,
     "max": 2507.22,
     "quality": "reported",
     "raw": "2507.215807",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.35943,
     "max": 0.35943,
     "quality": "reported",
     "raw": "0.359429956",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "No ignition",
     "quality": "reported",
     "raw": "No ignition",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.368,
     "max": 5.368,
     "quality": "reported",
     "raw": "5.368002409",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 25.8,
     "max": 25.8,
     "quality": "reported",
     "raw": "25.8",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.145828,
     "max": 0.145828,
     "quality": "reported",
     "raw": "0.145828013",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/145",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21277 K2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 145,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277K2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 18:56:58:338 ,Experiment: 5,Test Point: 21277K2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277K2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277K2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 18:56:58:338 ,Experiment: 5,Test Point: 21277K2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277K2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2507.22,
     "max": 2507.22,
     "quality": "reported",
     "raw": "2507.215807",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "20",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow",
     "quality": "reported",
     "raw": "yellow",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.35943,
     "max": 0.35943,
     "quality": "reported",
     "raw": "0.359429956",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "different N2 ig delta.",
     "quality": "reported",
     "raw": "different N2 ig delta.",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.368,
     "max": 5.368,
     "quality": "reported",
     "raw": "5.368002409",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 160.1,
     "max": 160.1,
     "quality": "reported",
     "raw": "160.1",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.145828,
     "max": 0.145828,
     "quality": "reported",
     "raw": "0.145828013",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/146",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21277 J2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 146,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277J2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 19:22:32:192 ,Experiment: 5,Test Point: 21277J2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277J2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277J2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 19:22:32:192 ,Experiment: 5,Test Point: 21277J2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277J2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2209.37,
     "max": 2209.37,
     "quality": "reported",
     "raw": "2209.372895",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.356755,
     "max": 0.356755,
     "quality": "reported",
     "raw": "0.356754522",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "no",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "No ignition",
     "quality": "reported",
     "raw": "No ignition",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.368,
     "max": 5.368,
     "quality": "reported",
     "raw": "5.368002409",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 25.9,
     "max": 25.9,
     "quality": "reported",
     "raw": "25.9",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.108454,
     "max": 0.108454,
     "quality": "reported",
     "raw": "0.108454236",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/147",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21277 C1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 147,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277C1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 19:57:32:130 ,Experiment: 5,Test Point: 21277C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277C1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 19:57:32:130 ,Experiment: 5,Test Point: 21277C1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2932.45,
     "max": 2932.45,
     "quality": "reported",
     "raw": "2932.454962",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "20",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow",
     "quality": "reported",
     "raw": "yellow",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.2522,
     "max": 0.2522,
     "quality": "reported",
     "raw": "0.2522",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.368,
     "max": 5.368,
     "quality": "reported",
     "raw": "5.368002409",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 405.1,
     "max": 405.1,
     "quality": "reported",
     "raw": "405.1",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.370259,
     "max": 0.370259,
     "quality": "reported",
     "raw": "0.37025908",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/148",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21277 C2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 148,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277C2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 20:10:05:193 ,Experiment: 5,Test Point: 21277C2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277C2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277C2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 20:10:05:193 ,Experiment: 5,Test Point: 21277C2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277C2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2931.93,
     "max": 2931.93,
     "quality": "reported",
     "raw": "2931.928594",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 36,
     "max": 36,
     "quality": "reported",
     "raw": "36",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow",
     "quality": "reported",
     "raw": "yellow",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.251248,
     "max": 0.251248,
     "quality": "reported",
     "raw": "0.251247573",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 8.94667,
     "max": 8.94667,
     "quality": "reported",
     "raw": "8.946670681",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 289.2,
     "max": 289.2,
     "quality": "reported",
     "raw": "289.2",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.370954,
     "max": 0.370954,
     "quality": "reported",
     "raw": "0.370953716",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/149",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21277 L1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 149,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277L1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 20:30:18:160 ,Experiment: 5,Test Point: 21277L1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277L1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277L1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 20:30:18:160 ,Experiment: 5,Test Point: 21277L1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277L1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2744.23,
     "max": 2744.23,
     "quality": "reported",
     "raw": "2744.233888",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "yellow",
     "quality": "reported",
     "raw": "yellow",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.248413,
     "max": 0.248413,
     "quality": "reported",
     "raw": "0.248412758",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "hit the temperature limit",
     "quality": "reported",
     "raw": "hit the temperature limit",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.368,
     "max": 5.368,
     "quality": "reported",
     "raw": "5.368002409",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 386.5,
     "max": 386.5,
     "quality": "reported",
     "raw": "386.5",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.268083,
     "max": 0.268083,
     "quality": "reported",
     "raw": "0.268082755",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/150",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21277 F1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 150,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277F1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 21:04:33:192 ,Experiment: 5,Test Point: 21277F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277F1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 21:04:33:192 ,Experiment: 5,Test Point: 21277F1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2878.35,
     "max": 2878.35,
     "quality": "reported",
     "raw": "2878.349024",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 5.368,
     "max": 5.368,
     "quality": "reported",
     "raw": "5.368002409",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 392.4,
     "max": 392.4,
     "quality": "reported",
     "raw": "392.4",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.436143,
     "max": 0.436143,
     "quality": "reported",
     "raw": "0.436142881",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/151",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21277 F2",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 151,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277F2_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 21:38:44:425 ,Experiment: 5,Test Point: 21277F2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277F2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277F2_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 21:38:44:425 ,Experiment: 5,Test Point: 21277F2,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277F2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2875.67,
     "max": 2875.67,
     "quality": "reported",
     "raw": "2875.672656",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.1775,
     "max": 0.1775,
     "quality": "reported",
     "raw": "0.177499831",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 8.94667,
     "max": 8.94667,
     "quality": "reported",
     "raw": "8.946670681",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 441.5,
     "max": 441.5,
     "quality": "reported",
     "raw": "441.5",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.43903,
     "max": 0.43903,
     "quality": "reported",
     "raw": "0.43903047",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/152",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21277 M1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 152,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277M1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 22:27:27:231 ,Experiment: 5,Test Point: 21277M1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277M1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277M1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 22:27:27:231 ,Experiment: 5,Test Point: 21277M1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277M1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2823.94,
     "max": 2823.94,
     "quality": "reported",
     "raw": "2823.94302",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 66,
     "max": 66,
     "quality": "reported",
     "raw": "66",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "at limit",
     "quality": "reported",
     "raw": "limit",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.1406,
     "max": 0.1406,
     "quality": "reported",
     "raw": "0.1406",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "hit the temperature limit",
     "quality": "reported",
     "raw": "hit the temperature limit",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 8.94667,
     "max": 8.94667,
     "quality": "reported",
     "raw": "8.946670681",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 456,
     "max": 456,
     "quality": "reported",
     "raw": "456",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.488522,
     "max": 0.488522,
     "quality": "reported",
     "raw": "0.488522469",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/153",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21277 N1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 153,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277N1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 22:41:25:408 ,Experiment: 5,Test Point: 21277N1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277N1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277N1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 22:41:25:408 ,Experiment: 5,Test Point: 21277N1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277N1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2642.95,
     "max": 2642.95,
     "quality": "reported",
     "raw": "2642.951581",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 55,
     "max": 55,
     "quality": "reported",
     "raw": "55",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.833333,
     "max": 0.833333,
     "quality": "reported",
     "raw": "0.833333333",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.1406,
     "max": 0.1406,
     "quality": "reported",
     "raw": "0.1406",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "hit the temperature limit",
     "quality": "reported",
     "raw": "hit the temperature limit",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 2.98222,
     "max": 2.98222,
     "quality": "reported",
     "raw": "2.98222356",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 458.2,
     "max": 458.2,
     "quality": "reported",
     "raw": "458.2",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.370259,
     "max": 0.370259,
     "quality": "reported",
     "raw": "0.370258568",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-inverse/154",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21277 P1",
   "source_table": "PSI-159_Experimental table_CFI-G_Inverse Flames.csv",
   "source_row": 154,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 1 Gain: 10.000000",
     "column": "row 0, column PMT 1 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277P1_data.csv, row 0, column PMT 1 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 23:02:34:362 ,Experiment: 5,Test Point: 21277P1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277P1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMT 3 Gain: 10.000000",
     "column": "row 0, column PMT 3 Gain: 10.000000",
     "note": "From NASA's file PSI-159_Raw Data_21277P1_data.csv, row 0, column PMT 3 Gain: 10.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-04 277 23:02:34:362 ,Experiment: 5,Test Point: 21277P1,MFCA1 Gas: 3,MFCA1 Full Scale: 0.500000,MFCA2 Gas: 0,MFCA2 Full Scale: 5.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 2.000000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 10.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 10.000000",
     "evidence_source": "file:PSI-159_Raw Data_21277P1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2368.84,
     "max": 2368.84,
     "quality": "reported",
     "raw": "2368.835465",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 40,
     "max": 40,
     "quality": "reported",
     "raw": "40",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self -ext or flow term"
    },
    "flame_color": {
     "text": "blue",
     "quality": "reported",
     "raw": "Blue",
     "column": "Color"
    },
    "flame_type": {
     "text": "inverse",
     "quality": "reported",
     "raw": "inverse",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.51,
     "max": 0.51,
     "quality": "reported",
     "raw": "0.510",
     "column": "HC burnrate (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.1406,
     "max": 0.1406,
     "quality": "reported",
     "raw": "0.1406",
     "column": "Xf before test"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "hit the temperature limit",
     "quality": "reported",
     "raw": "hit the temperature limit",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "oxidizer stream",
     "quality": "context",
     "note": "The oxygen value is the stream fed through the burner into a fuel atmosphere, not a cabin-like ambient.",
     "evidence": "an oxygen-nitrogen mixture of up to 85% oxygen flowed from the spherical burner creating an inside-out flame",
     "evidence_source": "challenge"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "XO2"
    },
    "oxidizer_flow_mg_s": {
     "min": 1.82512,
     "max": 1.82512,
     "quality": "reported",
     "raw": "1.825120819",
     "column": "O2 flow rate (mg/s)"
    },
    "peak_burner_temp_c": {
     "min": 458.3,
     "max": 458.3,
     "quality": "reported",
     "raw": "458.3",
     "column": "Peak burner Temp (C)"
    },
    "pressure_kpa": {
     "min": 55.165,
     "max": 55.165,
     "quality": "reported",
     "raw": "0.55165",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.266,
     "max": 0.266,
     "quality": "reported",
     "raw": "0.26600049",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/1",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21088A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-159_Raw Data_21088A1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 15:25:09:637 ,Experiment: 5,Test Point: 21088A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-159_Raw Data_21088A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-159_Raw Data_21088A1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 15:25:09:637 ,Experiment: 5,Test Point: 21088A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-159_Raw Data_21088A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2719.32,
     "max": 2719.32,
     "quality": "reported",
     "raw": "2719.323211",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 50,
     "max": 50,
     "quality": "reported",
     "raw": "50",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.3939,
     "max": 0.3939,
     "quality": "reported",
     "raw": "0.3939",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.389823,
     "max": 0.389823,
     "quality": "reported",
     "raw": "0.389822946",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 290.617,
     "max": 290.617,
     "quality": "reported",
     "raw": "290.617198",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.102652,
     "max": 0.102652,
     "quality": "reported",
     "raw": "0.102651783",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/2",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21088 B1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-159_Raw Data_21088B1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 15:52:53:587 ,Experiment: 5,Test Point: 21088B1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-159_Raw Data_21088B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-159_Raw Data_21088B1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 15:52:53:587 ,Experiment: 5,Test Point: 21088B1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-159_Raw Data_21088B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2713.59,
     "max": 2713.59,
     "quality": "reported",
     "raw": "2713.594987",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 43,
     "max": 43,
     "quality": "reported",
     "raw": "43",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.389823,
     "max": 0.389823,
     "quality": "reported",
     "raw": "0.389822946",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.386321,
     "max": 0.386321,
     "quality": "reported",
     "raw": "0.386321188",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 276.009,
     "max": 276.009,
     "quality": "reported",
     "raw": "276.009368",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.101748,
     "max": 0.101748,
     "quality": "reported",
     "raw": "0.101747543",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/3",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21088 C1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 3,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21088C1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 16:25:16:521 ,Experiment: 5,Test Point: 21088C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21088C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21088C1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 16:25:16:521 ,Experiment: 5,Test Point: 21088C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21088C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2708.6,
     "max": 2708.6,
     "quality": "reported",
     "raw": "2708.596221",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 42,
     "max": 42,
     "quality": "reported",
     "raw": "42",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "hit burner T limit",
     "quality": "reported",
     "raw": "hit burner T limit",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.386321,
     "max": 0.386321,
     "quality": "reported",
     "raw": "0.386321188",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.382905,
     "max": 0.382905,
     "quality": "reported",
     "raw": "0.382905163",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 266.374,
     "max": 266.374,
     "quality": "reported",
     "raw": "266.374008",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.100969,
     "max": 0.100969,
     "quality": "reported",
     "raw": "0.100968644",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/4",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21088 D1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 4,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21088D1_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 17:34:56:915 ,Experiment: 5,Test Point: 21088D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21088D1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6.5,
     "max": 6.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.500000",
     "column": "row 0, column PMT 3 Gain: 6.500000",
     "note": "From NASA's file PSI-159_Raw Data_21088D1_data.csv, row 0, column PMT 3 Gain: 6.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 17:34:56:915 ,Experiment: 5,Test Point: 21088D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21088D1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2703.65,
     "max": 2703.65,
     "quality": "reported",
     "raw": "2703.647801",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 61,
     "max": 61,
     "quality": "reported",
     "raw": "61",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "FC=flow cut",
     "quality": "reported",
     "raw": "FC=flow cut",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.382905,
     "max": 0.382905,
     "quality": "reported",
     "raw": "0.382905163",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.380427,
     "max": 0.380427,
     "quality": "reported",
     "raw": "0.380426741",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 459.196,
     "max": 459.196,
     "quality": "reported",
     "raw": "459.195642",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.100207,
     "max": 0.100207,
     "quality": "reported",
     "raw": "0.100206801",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/5",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21088 F1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 5,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21088F1_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 17:47:27:881 ,Experiment: 5,Test Point: 21088F1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21088F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21088F1_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 17:47:27:881 ,Experiment: 5,Test Point: 21088F1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21088F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2700.01,
     "max": 2700.01,
     "quality": "reported",
     "raw": "2700.011998",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 28,
     "max": 28,
     "quality": "reported",
     "raw": "28",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Lowest flow rate for ignition",
     "quality": "reported",
     "raw": "Lowest flow rate for ignition",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.380427,
     "max": 0.380427,
     "quality": "reported",
     "raw": "0.380426741",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.379858,
     "max": 0.379858,
     "quality": "reported",
     "raw": "0.379858042",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 532.163,
     "max": 532.163,
     "quality": "reported",
     "raw": "532.162657",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0996528,
     "max": 0.0996528,
     "quality": "reported",
     "raw": "0.099652813",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/6",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21088 G1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 6,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21088G1_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 18:08:19:244 ,Experiment: 5,Test Point: 21088G1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21088G1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21088G1_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 18:08:19:244 ,Experiment: 5,Test Point: 21088G1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21088G1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2639.22,
     "max": 2639.22,
     "quality": "reported",
     "raw": "2639.215662",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 42,
     "max": 42,
     "quality": "reported",
     "raw": "42",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.379858,
     "max": 0.379858,
     "quality": "reported",
     "raw": "0.379858042",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.376135,
     "max": 0.376135,
     "quality": "reported",
     "raw": "0.376135171",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 226.739,
     "max": 226.739,
     "quality": "reported",
     "raw": "226.739332",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.175932,
     "max": 0.175932,
     "quality": "reported",
     "raw": "0.175931996",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/7",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21088 H1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 7,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21088H1_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 18:28:07:838 ,Experiment: 5,Test Point: 21088H1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21088H1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21088H1_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 18:28:07:838 ,Experiment: 5,Test Point: 21088H1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21088H1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2633.82,
     "max": 2633.82,
     "quality": "reported",
     "raw": "2633.824861",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 62,
     "max": 62,
     "quality": "reported",
     "raw": "62",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.376135,
     "max": 0.376135,
     "quality": "reported",
     "raw": "0.376135171",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.373392,
     "max": 0.373392,
     "quality": "reported",
     "raw": "0.373391583",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 416.787,
     "max": 416.787,
     "quality": "reported",
     "raw": "416.786789",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.174581,
     "max": 0.174581,
     "quality": "reported",
     "raw": "0.174581055",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/8",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21088 J1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 8,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-159_Raw Data_21088J1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 19:00:15:952 ,Experiment: 5,Test Point: 21088J1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-159_Raw Data_21088J1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-159_Raw Data_21088J1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 19:00:15:952 ,Experiment: 5,Test Point: 21088J1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-159_Raw Data_21088J1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2512.32,
     "max": 2512.32,
     "quality": "reported",
     "raw": "2512.315217",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 37,
     "max": 37,
     "quality": "reported",
     "raw": "37",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.373392,
     "max": 0.373392,
     "quality": "reported",
     "raw": "0.373391583",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.369578,
     "max": 0.369578,
     "quality": "reported",
     "raw": "0.369578072",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 164.051,
     "max": 164.051,
     "quality": "reported",
     "raw": "164.051351",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.292108,
     "max": 0.292108,
     "quality": "reported",
     "raw": "0.292108087",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/9",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21088 K1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 9,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21088K1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 19:23:18:010 ,Experiment: 5,Test Point: 21088K1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21088K1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21088K1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 19:23:18:010 ,Experiment: 5,Test Point: 21088K1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21088K1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2506.61,
     "max": 2506.61,
     "quality": "reported",
     "raw": "2506.607152",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 98,
     "max": 98,
     "quality": "reported",
     "raw": "98",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.369578,
     "max": 0.369578,
     "quality": "reported",
     "raw": "0.369578072",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.36455,
     "max": 0.36455,
     "quality": "reported",
     "raw": "0.364549879",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 340.169,
     "max": 340.169,
     "quality": "reported",
     "raw": "340.169199",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.290096,
     "max": 0.290096,
     "quality": "reported",
     "raw": "0.29009599",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/10",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21088 H2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 10,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21088H2_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 20:14:46:909 ,Experiment: 5,Test Point: 21088H2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21088H2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21088H2_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 20:14:46:909 ,Experiment: 5,Test Point: 21088H2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 1,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21088H2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2616.4,
     "max": 2616.4,
     "quality": "reported",
     "raw": "2616.399176",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 127,
     "max": 127,
     "quality": "reported",
     "raw": "127",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.36455,
     "max": 0.36455,
     "quality": "reported",
     "raw": "0.364549879",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.358976,
     "max": 0.358976,
     "quality": "reported",
     "raw": "0.358975632",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 421.915,
     "max": 421.915,
     "quality": "reported",
     "raw": "421.915051",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.17034,
     "max": 0.17034,
     "quality": "reported",
     "raw": "0.170339735",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/11",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21088 M4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 11,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21088M4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 23:53:01:302 ,Experiment: 5,Test Point: 21088M4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21088M4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21088M4_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-29 088 23:53:01:302 ,Experiment: 5,Test Point: 21088M4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21088M4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2256.6,
     "max": 2256.6,
     "quality": "reported",
     "raw": "2256.600629",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 13,
     "max": 13,
     "quality": "reported",
     "raw": "13",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.2101,
     "max": 0.2101,
     "quality": "reported",
     "raw": "0.2101",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.209639,
     "max": 0.209639,
     "quality": "reported",
     "raw": "0.209638709",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 125.225,
     "max": 125.225,
     "quality": "reported",
     "raw": "125.225207",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0588815,
     "max": 0.0588815,
     "quality": "reported",
     "raw": "0.058881505",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/12",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21088 L1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 12,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21088L1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-30 089 00:11:13:957 ,Experiment: 5,Test Point: 21088L1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21088L1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21088L1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-30 089 00:11:13:957 ,Experiment: 5,Test Point: 21088L1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21088L1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2254.43,
     "max": 2254.43,
     "quality": "reported",
     "raw": "2254.430202",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.209639,
     "max": 0.209639,
     "quality": "reported",
     "raw": "0.209638709",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.209,
     "max": 0.209,
     "quality": "reported",
     "raw": "0.209000159",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 80.8277,
     "max": 80.8277,
     "quality": "reported",
     "raw": "80.8277263",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0587633,
     "max": 0.0587633,
     "quality": "reported",
     "raw": "0.058763347",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/13",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21088 N1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 13,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-159_Raw Data_21088N1_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-30 089 00:54:46:445 ,Experiment: 5,Test Point: 21088N1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21088N1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21088N1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-30 089 00:54:46:445 ,Experiment: 5,Test Point: 21088N1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21088N1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2042.84,
     "max": 2042.84,
     "quality": "reported",
     "raw": "2042.838447",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "7",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.1802,
     "max": 0.1802,
     "quality": "reported",
     "raw": "0.1802",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.179686,
     "max": 0.179686,
     "quality": "reported",
     "raw": "0.179685675",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 53.3353,
     "max": 53.3353,
     "quality": "reported",
     "raw": "53.3353079",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0942709,
     "max": 0.0942709,
     "quality": "reported",
     "raw": "0.094270919",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/14",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21088 P1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 14,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21088P1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-30 089 01:12:50:498 ,Experiment: 5,Test Point: 21088P1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21088P1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21088P1_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-03-30 089 01:12:50:498 ,Experiment: 5,Test Point: 21088P1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 21,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21088P1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2039.86,
     "max": 2039.86,
     "quality": "reported",
     "raw": "2039.856766",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.179686,
     "max": 0.179686,
     "quality": "reported",
     "raw": "0.179685675",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.179392,
     "max": 0.179392,
     "quality": "reported",
     "raw": "0.17939183",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 74.1763,
     "max": 74.1763,
     "quality": "reported",
     "raw": "74.1763366",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0940332,
     "max": 0.0940332,
     "quality": "reported",
     "raw": "0.09403323",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/15",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21102A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 15,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21102A1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 17:58:45:495 ,Experiment: 5,Test Point: 21102A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21102A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21102A1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 17:58:45:495 ,Experiment: 5,Test Point: 21102A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21102A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2633.04,
     "max": 2633.04,
     "quality": "reported",
     "raw": "2633.037949",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 40,
     "max": 40,
     "quality": "reported",
     "raw": "40",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.6,
     "max": 1.6,
     "quality": "reported",
     "raw": "1.6",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Manually stopped the flow. No cool flame detected.",
     "quality": "reported",
     "raw": "Manually stopped the flow. No cool flame detected.",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.3957,
     "max": 0.3957,
     "quality": "reported",
     "raw": "0.3957",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.393032,
     "max": 0.393032,
     "quality": "reported",
     "raw": "0.393031985",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 231,
     "max": 231,
     "quality": "reported",
     "raw": "231",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.226287,
     "max": 0.226287,
     "quality": "reported",
     "raw": "0.226286935",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/16",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21102 C1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 16,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21102C1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 19:04:57:854 ,Experiment: 5,Test Point: 21102C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21102C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21102C1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 19:04:57:854 ,Experiment: 5,Test Point: 21102C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21102C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2693.53,
     "max": 2693.53,
     "quality": "reported",
     "raw": "2693.534385",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 41,
     "max": 41,
     "quality": "reported",
     "raw": "41",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.6,
     "max": 1.6,
     "quality": "reported",
     "raw": "1.6",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Extinction detected. Fuel flow stopped in 6 sec after PMT dropped to 0.",
     "quality": "reported",
     "raw": "Extinction detected. Fuel flow stopped in 6 sec after PMT dropped to 0.",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.393032,
     "max": 0.393032,
     "quality": "reported",
     "raw": "0.393031985",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.390548,
     "max": 0.390548,
     "quality": "reported",
     "raw": "0.390548195",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 269,
     "max": 269,
     "quality": "reported",
     "raw": "269",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.149712,
     "max": 0.149712,
     "quality": "reported",
     "raw": "0.149712142",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/17",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21102 B1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 17,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21102B1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 19:41:15:066 ,Experiment: 5,Test Point: 21102B1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21102B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21102B1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 19:41:15:066 ,Experiment: 5,Test Point: 21102B1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21102B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2501.09,
     "max": 2501.09,
     "quality": "reported",
     "raw": "2501.08662",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 38,
     "max": 38,
     "quality": "reported",
     "raw": "38",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.3,
     "max": 1.3,
     "quality": "reported",
     "raw": "1.3",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.125,
     "max": 0.125,
     "quality": "reported",
     "raw": "0.125",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.390548,
     "max": 0.390548,
     "quality": "reported",
     "raw": "0.390548195",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.388126,
     "max": 0.388126,
     "quality": "reported",
     "raw": "0.388126117",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 196,
     "max": 196,
     "quality": "reported",
     "raw": "196",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.340608,
     "max": 0.340608,
     "quality": "reported",
     "raw": "0.340607747",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/18",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21102 C2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 18,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21102C2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 20:05:06:411 ,Experiment: 5,Test Point: 21102C2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21102C2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21102C2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 20:05:06:411 ,Experiment: 5,Test Point: 21102C2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21102C2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2686.71,
     "max": 2686.71,
     "quality": "reported",
     "raw": "2686.707285",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 63,
     "max": 63,
     "quality": "reported",
     "raw": "63",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.388126,
     "max": 0.388126,
     "quality": "reported",
     "raw": "0.388126117",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.386222,
     "max": 0.386222,
     "quality": "reported",
     "raw": "0.386221513",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 505,
     "max": 505,
     "quality": "reported",
     "raw": "505",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.148204,
     "max": 0.148204,
     "quality": "reported",
     "raw": "0.148203665",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/19",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21102 C3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 19,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21102C3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 20:37:28:931 ,Experiment: 5,Test Point: 21102C3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21102C3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21102C3_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 20:37:28:931 ,Experiment: 5,Test Point: 21102C3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21102C3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2684.02,
     "max": 2684.02,
     "quality": "reported",
     "raw": "2684.020784",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 82,
     "max": 82,
     "quality": "reported",
     "raw": "82",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.2,
     "max": 1.2,
     "quality": "reported",
     "raw": "1.2",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.386222,
     "max": 0.386222,
     "quality": "reported",
     "raw": "0.386221513",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.382509,
     "max": 0.382509,
     "quality": "reported",
     "raw": "0.382509153",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 388,
     "max": 388,
     "quality": "reported",
     "raw": "388",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.147616,
     "max": 0.147616,
     "quality": "reported",
     "raw": "0.147616047",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/20",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21102 C4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 20,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21102C4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 21:12:27:340 ,Experiment: 5,Test Point: 21102C4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21102C4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21102C4_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 21:12:27:340 ,Experiment: 5,Test Point: 21102C4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21102C4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2678.72,
     "max": 2678.72,
     "quality": "reported",
     "raw": "2678.72461",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Igniter voltage: 2V and 2.5V for 10 sec each. No ignition.Retracted too early.",
     "quality": "reported",
     "raw": "Igniter voltage: 2V and 2.5V for 10 sec each. No ignition.Retracted too early.",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.382509,
     "max": 0.382509,
     "quality": "reported",
     "raw": "0.382509153",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.382509,
     "max": 0.382509,
     "quality": "reported",
     "raw": "0.382509153",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.146467,
     "max": 0.146467,
     "quality": "reported",
     "raw": "0.146467485",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/21",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21102 C5",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 21,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21102C5_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 21:33:48:101 ,Experiment: 5,Test Point: 21102C5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21102C5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21102C5_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 21:33:48:101 ,Experiment: 5,Test Point: 21102C5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21102C5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2678.72,
     "max": 2678.72,
     "quality": "reported",
     "raw": "2678.72461",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 43,
     "max": 43,
     "quality": "reported",
     "raw": "43",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Igniter voltage: 2.25V and 2.75V for 10 sec each. No ignition.",
     "quality": "reported",
     "raw": "Igniter voltage: 2.25V and 2.75V for 10 sec each. No ignition.",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.382509,
     "max": 0.382509,
     "quality": "reported",
     "raw": "0.382509153",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.381212,
     "max": 0.381212,
     "quality": "reported",
     "raw": "0.381212087",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 449,
     "max": 449,
     "quality": "reported",
     "raw": "449",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.146467,
     "max": 0.146467,
     "quality": "reported",
     "raw": "0.146467485",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/22",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21102 C6",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 22,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21102C6_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 21:55:34:542 ,Experiment: 5,Test Point: 21102C6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21102C6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21102C6_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 21:55:34:542 ,Experiment: 5,Test Point: 21102C6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21102C6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2676.86,
     "max": 2676.86,
     "quality": "reported",
     "raw": "2676.855135",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Igniter voltage: 2V and 2.5V for 10 sec each. No ignition. PMT2 gain 0.04V.",
     "quality": "reported",
     "raw": "Igniter voltage: 2V and 2.5V for 10 sec each. No ignition. PMT2 gain 0.04V.",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.381212,
     "max": 0.381212,
     "quality": "reported",
     "raw": "0.381212087",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.381212,
     "max": 0.381212,
     "quality": "reported",
     "raw": "0.381212087",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.146065,
     "max": 0.146065,
     "quality": "reported",
     "raw": "0.146065187",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/23",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21102 C7",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 23,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "PMT 1 Gain: 8.000000",
     "column": "row 0, column PMT 1 Gain: 8.000000",
     "note": "From NASA's file PSI-159_Raw Data_21102C7_data.csv, row 0, column PMT 1 Gain: 8.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 22:08:18:514 ,Experiment: 5,Test Point: 21102C7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 8.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 8.000000",
     "evidence_source": "file:PSI-159_Raw Data_21102C7_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "PMT 3 Gain: 8.000000",
     "column": "row 0, column PMT 3 Gain: 8.000000",
     "note": "From NASA's file PSI-159_Raw Data_21102C7_data.csv, row 0, column PMT 3 Gain: 8.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 22:08:18:514 ,Experiment: 5,Test Point: 21102C7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 8.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 8.000000",
     "evidence_source": "file:PSI-159_Raw Data_21102C7_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2676.86,
     "max": 2676.86,
     "quality": "reported",
     "raw": "2676.855135",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 18,
     "max": 18,
     "quality": "reported",
     "raw": "18",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Igniter voltage: 2.1V and 2.6V for 10 sec each. Hot flame.",
     "quality": "reported",
     "raw": "Igniter voltage: 2.1V and 2.6V for 10 sec each. Hot flame.",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.381212,
     "max": 0.381212,
     "quality": "reported",
     "raw": "0.381212087",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.380669,
     "max": 0.380669,
     "quality": "reported",
     "raw": "0.380669262",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 298,
     "max": 298,
     "quality": "reported",
     "raw": "298",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.146065,
     "max": 0.146065,
     "quality": "reported",
     "raw": "0.146065187",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/24",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21102 C8",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 24,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "PMT 1 Gain: 8.000000",
     "column": "row 0, column PMT 1 Gain: 8.000000",
     "note": "From NASA's file PSI-159_Raw Data_21102C8_data.csv, row 0, column PMT 1 Gain: 8.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 22:19:33:684 ,Experiment: 5,Test Point: 21102C8,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 8.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 8.000000",
     "evidence_source": "file:PSI-159_Raw Data_21102C8_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "PMT 3 Gain: 8.000000",
     "column": "row 0, column PMT 3 Gain: 8.000000",
     "note": "From NASA's file PSI-159_Raw Data_21102C8_data.csv, row 0, column PMT 3 Gain: 8.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 22:19:33:684 ,Experiment: 5,Test Point: 21102C8,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 8.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 8.000000",
     "evidence_source": "file:PSI-159_Raw Data_21102C8_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2676.07,
     "max": 2676.07,
     "quality": "reported",
     "raw": "2676.069774",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Igniter voltage: 2V and 2.5V for 10 sec and 20 sec respectively.",
     "quality": "reported",
     "raw": "Igniter voltage: 2V and 2.5V for 10 sec and 20 sec respectively.",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.380669,
     "max": 0.380669,
     "quality": "reported",
     "raw": "0.380669262",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.380669,
     "max": 0.380669,
     "quality": "reported",
     "raw": "0.380669262",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.145897,
     "max": 0.145897,
     "quality": "reported",
     "raw": "0.145896669",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/25",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21102 M1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 25,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21102M1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 23:11:25:063 ,Experiment: 5,Test Point: 21102M1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21102M1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21102M1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 23:11:25:063 ,Experiment: 5,Test Point: 21102M1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21102M1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2336.98,
     "max": 2336.98,
     "quality": "reported",
     "raw": "2336.982762",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.6,
     "max": 1.6,
     "quality": "reported",
     "raw": "1.6",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.2341,
     "max": 0.2341,
     "quality": "reported",
     "raw": "0.2341",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.233649,
     "max": 0.233649,
     "quality": "reported",
     "raw": "0.233649188",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 75,
     "max": 75,
     "quality": "reported",
     "raw": "75",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0967948,
     "max": 0.0967948,
     "quality": "reported",
     "raw": "0.096794751",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/26",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21102 M2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 26,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21102M2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 23:25:22:528 ,Experiment: 5,Test Point: 21102M2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21102M2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21102M2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 23:25:22:528 ,Experiment: 5,Test Point: 21102M2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21102M2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2335.25,
     "max": 2335.25,
     "quality": "reported",
     "raw": "2335.25391",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 14,
     "max": 14,
     "quality": "reported",
     "raw": "14",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "may have intensified images",
     "quality": "reported",
     "raw": "may have intensified images",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.233649,
     "max": 0.233649,
     "quality": "reported",
     "raw": "0.233649188",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.233255,
     "max": 0.233255,
     "quality": "reported",
     "raw": "0.233254802",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 139,
     "max": 139,
     "quality": "reported",
     "raw": "139",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0966318,
     "max": 0.0966318,
     "quality": "reported",
     "raw": "0.096631781",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/27",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21102 M3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 27,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "PMT 1 Gain: 8.000000",
     "column": "row 0, column PMT 1 Gain: 8.000000",
     "note": "From NASA's file PSI-159_Raw Data_21102M3_data.csv, row 0, column PMT 1 Gain: 8.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 23:43:15:087 ,Experiment: 5,Test Point: 21102M3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 8.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 8.000000",
     "evidence_source": "file:PSI-159_Raw Data_21102M3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "PMT 3 Gain: 8.000000",
     "column": "row 0, column PMT 3 Gain: 8.000000",
     "note": "From NASA's file PSI-159_Raw Data_21102M3_data.csv, row 0, column PMT 3 Gain: 8.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 23:43:15:087 ,Experiment: 5,Test Point: 21102M3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 8.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 8.000000",
     "evidence_source": "file:PSI-159_Raw Data_21102M3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2333.74,
     "max": 2333.74,
     "quality": "reported",
     "raw": "2333.736064",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Igniter voltage: 2V and 2.5V for 10 sec and 20 sec respectively.",
     "quality": "reported",
     "raw": "Igniter voltage: 2V and 2.5V for 10 sec and 20 sec respectively.",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.233255,
     "max": 0.233255,
     "quality": "reported",
     "raw": "0.233254802",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.233255,
     "max": 0.233255,
     "quality": "reported",
     "raw": "0.233254802",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0964891,
     "max": 0.0964891,
     "quality": "reported",
     "raw": "0.096489144",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/28",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21102 M4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 28,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "PMT 1 Gain: 8.000000",
     "column": "row 0, column PMT 1 Gain: 8.000000",
     "note": "From NASA's file PSI-159_Raw Data_21102M4_data.csv, row 0, column PMT 1 Gain: 8.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 23:54:48:292 ,Experiment: 5,Test Point: 21102M4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 8.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 8.000000",
     "evidence_source": "file:PSI-159_Raw Data_21102M4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "PMT 3 Gain: 8.000000",
     "column": "row 0, column PMT 3 Gain: 8.000000",
     "note": "From NASA's file PSI-159_Raw Data_21102M4_data.csv, row 0, column PMT 3 Gain: 8.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-12 102 23:54:48:292 ,Experiment: 5,Test Point: 21102M4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 8.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 8.000000",
     "evidence_source": "file:PSI-159_Raw Data_21102M4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2333.74,
     "max": 2333.74,
     "quality": "reported",
     "raw": "2333.736064",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Igniter voltage: 2.1V and 2.6V for 10 sec and 20 sec respectively.",
     "quality": "reported",
     "raw": "Igniter voltage: 2.1V and 2.6V for 10 sec and 20 sec respectively.",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.233255,
     "max": 0.233255,
     "quality": "reported",
     "raw": "0.233254802",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.233255,
     "max": 0.233255,
     "quality": "reported",
     "raw": "0.233254802",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0964891,
     "max": 0.0964891,
     "quality": "reported",
     "raw": "0.096489144",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/29",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21102 M5",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 29,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "PMT 1 Gain: 8.000000",
     "column": "row 0, column PMT 1 Gain: 8.000000",
     "note": "From NASA's file PSI-159_Raw Data_21102M5_data.csv, row 0, column PMT 1 Gain: 8.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-13 103 00:03:36:538 ,Experiment: 5,Test Point: 21102M5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 8.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 8.000000",
     "evidence_source": "file:PSI-159_Raw Data_21102M5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "PMT 3 Gain: 8.000000",
     "column": "row 0, column PMT 3 Gain: 8.000000",
     "note": "From NASA's file PSI-159_Raw Data_21102M5_data.csv, row 0, column PMT 3 Gain: 8.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-13 103 00:03:36:538 ,Experiment: 5,Test Point: 21102M5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 8.000000,PMT 2 Gain: 8.000000,PMT 3 Gain: 8.000000",
     "evidence_source": "file:PSI-159_Raw Data_21102M5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2333.74,
     "max": 2333.74,
     "quality": "reported",
     "raw": "2333.736064",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Igniter voltage: 2.2V and 2.7V for 10 sec and 20 sec respectively.",
     "quality": "reported",
     "raw": "Igniter voltage: 2.2V and 2.7V for 10 sec and 20 sec respectively.",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.233255,
     "max": 0.233255,
     "quality": "reported",
     "raw": "0.233254802",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.233255,
     "max": 0.233255,
     "quality": "reported",
     "raw": "0.233254802",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0964891,
     "max": 0.0964891,
     "quality": "reported",
     "raw": "0.096489144",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/30",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21102 M6",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 30,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "adiabatic_flame_temp_k": {
     "min": 2333.74,
     "max": 2333.74,
     "quality": "reported",
     "raw": "2333.736064",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Igniter voltage: 2.4V and 2.9V for 10 sec and 20 sec respectively.",
     "quality": "reported",
     "raw": "Igniter voltage: 2.4V and 2.9V for 10 sec and 20 sec respectively.",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.233255,
     "max": 0.233255,
     "quality": "reported",
     "raw": "0.233254802",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.233255,
     "max": 0.233255,
     "quality": "reported",
     "raw": "0.233254802",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0964891,
     "max": 0.0964891,
     "quality": "reported",
     "raw": "0.096489144",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/31",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21106A4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 31,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106A4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-16 106 16:50:13:599 ,Experiment: 5,Test Point: 21106A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106A4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106A4_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-16 106 16:50:13:599 ,Experiment: 5,Test Point: 21106A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106A4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2628.96,
     "max": 2628.96,
     "quality": "reported",
     "raw": "2628.957655",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.6,
     "max": 1.6,
     "quality": "reported",
     "raw": "1.6",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "hot ig",
     "quality": "reported",
     "raw": "hot ig",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.3926,
     "max": 0.3926,
     "quality": "reported",
     "raw": "0.3926",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.384639,
     "max": 0.384639,
     "quality": "reported",
     "raw": "0.384638613",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 283,
     "max": 283,
     "quality": "reported",
     "raw": "283",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.224986,
     "max": 0.224986,
     "quality": "reported",
     "raw": "0.224985684",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/32",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21106 B1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 32,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106B1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-16 106 17:25:32:716 ,Experiment: 5,Test Point: 21106B1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106B1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-16 106 17:25:32:716 ,Experiment: 5,Test Point: 21106B1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2681.77,
     "max": 2681.77,
     "quality": "reported",
     "raw": "2681.772338",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 62,
     "max": 62,
     "quality": "reported",
     "raw": "62",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.6,
     "max": 1.6,
     "quality": "reported",
     "raw": "1.6",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.384639,
     "max": 0.384639,
     "quality": "reported",
     "raw": "0.384638613",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.377171,
     "max": 0.377171,
     "quality": "reported",
     "raw": "0.377171369",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 316,
     "max": 316,
     "quality": "reported",
     "raw": "316",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.147127,
     "max": 0.147127,
     "quality": "reported",
     "raw": "0.147126835",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/33",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21106 C1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 33,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106C1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-16 106 17:57:21:132 ,Experiment: 5,Test Point: 21106C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106C1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-16 106 17:57:21:132 ,Experiment: 5,Test Point: 21106C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2482.42,
     "max": 2482.42,
     "quality": "reported",
     "raw": "2482.423373",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 63,
     "max": 63,
     "quality": "reported",
     "raw": "63",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.3,
     "max": 1.3,
     "quality": "reported",
     "raw": "1.3",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.125,
     "max": 0.125,
     "quality": "reported",
     "raw": "0.125",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.377171,
     "max": 0.377171,
     "quality": "reported",
     "raw": "0.377171369",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.369281,
     "max": 0.369281,
     "quality": "reported",
     "raw": "0.369281404",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 242,
     "max": 242,
     "quality": "reported",
     "raw": "242",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.333225,
     "max": 0.333225,
     "quality": "reported",
     "raw": "0.333225101",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/34",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21106 D1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 34,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106D1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-16 106 18:16:06:495 ,Experiment: 5,Test Point: 21106D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106D1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106D1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-16 106 18:16:06:495 ,Experiment: 5,Test Point: 21106D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106D1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2659.17,
     "max": 2659.17,
     "quality": "reported",
     "raw": "2659.169725",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 120,
     "max": 120,
     "quality": "reported",
     "raw": "120",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.2,
     "max": 1.2,
     "quality": "reported",
     "raw": "1.2",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.369281,
     "max": 0.369281,
     "quality": "reported",
     "raw": "0.369281404",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.358532,
     "max": 0.358532,
     "quality": "reported",
     "raw": "0.358532281",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 404,
     "max": 404,
     "quality": "reported",
     "raw": "404",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.14234,
     "max": 0.14234,
     "quality": "reported",
     "raw": "0.142340213",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/35",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21106 F1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 35,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106F1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-16 106 19:20:14:638 ,Experiment: 5,Test Point: 21106F1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106F1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-16 106 19:20:14:638 ,Experiment: 5,Test Point: 21106F1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2642.41,
     "max": 2642.41,
     "quality": "reported",
     "raw": "2642.41109",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 72,
     "max": 72,
     "quality": "reported",
     "raw": "72",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "hit T limit",
     "quality": "reported",
     "raw": "hit T limit",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.358532,
     "max": 0.358532,
     "quality": "reported",
     "raw": "0.358532281",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.354241,
     "max": 0.354241,
     "quality": "reported",
     "raw": "0.35424096",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 505,
     "max": 505,
     "quality": "reported",
     "raw": "505",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.138946,
     "max": 0.138946,
     "quality": "reported",
     "raw": "0.138945776",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/36",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21106 F2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 36,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106F2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-16 106 19:37:48:394 ,Experiment: 5,Test Point: 21106F2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106F2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106F2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-16 106 19:37:48:394 ,Experiment: 5,Test Point: 21106F2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106F2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2635.48,
     "max": 2635.48,
     "quality": "reported",
     "raw": "2635.478932",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "direct cool - no hot ignition",
     "quality": "reported",
     "raw": "direct cool - no hot ignition",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.354241,
     "max": 0.354241,
     "quality": "reported",
     "raw": "0.35424096",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.354241,
     "max": 0.354241,
     "quality": "reported",
     "raw": "0.35424096",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.13758,
     "max": 0.13758,
     "quality": "reported",
     "raw": "0.137580333",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/37",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21106 F3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 37,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106F3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-16 106 19:56:53:753 ,Experiment: 5,Test Point: 21106F3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106F3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106F3_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-16 106 19:56:53:753 ,Experiment: 5,Test Point: 21106F3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106F3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2635.48,
     "max": 2635.48,
     "quality": "reported",
     "raw": "2635.478932",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 13,
     "max": 13,
     "quality": "reported",
     "raw": "13",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "hot flame",
     "quality": "reported",
     "raw": "hot flame",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.354241,
     "max": 0.354241,
     "quality": "reported",
     "raw": "0.35424096",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.353757,
     "max": 0.353757,
     "quality": "reported",
     "raw": "0.353756802",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 313,
     "max": 313,
     "quality": "reported",
     "raw": "313",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.13758,
     "max": 0.13758,
     "quality": "reported",
     "raw": "0.137580333",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/38",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21106 F4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 38,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106F4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-16 106 20:33:42:963 ,Experiment: 5,Test Point: 21106F4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106F4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106F4_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-16 106 20:33:42:963 ,Experiment: 5,Test Point: 21106F4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106F4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2634.69,
     "max": 2634.69,
     "quality": "reported",
     "raw": "2634.687627",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 22,
     "max": 22,
     "quality": "reported",
     "raw": "22",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "hot flame",
     "quality": "reported",
     "raw": "hot flame",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.353757,
     "max": 0.353757,
     "quality": "reported",
     "raw": "0.353756802",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.352938,
     "max": 0.352938,
     "quality": "reported",
     "raw": "0.352937762",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 402,
     "max": 402,
     "quality": "reported",
     "raw": "402",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.137426,
     "max": 0.137426,
     "quality": "reported",
     "raw": "0.137425909",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/39",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21106 F5",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 39,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106F5_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-16 106 20:51:20:921 ,Experiment: 5,Test Point: 21106F5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106F5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106F5_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-16 106 20:51:20:921 ,Experiment: 5,Test Point: 21106F5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106F5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2633.34,
     "max": 2633.34,
     "quality": "reported",
     "raw": "2633.344646",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "direct cool - no hot ignition",
     "quality": "reported",
     "raw": "direct cool - no hot ignition",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.352938,
     "max": 0.352938,
     "quality": "reported",
     "raw": "0.352937762",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.352938,
     "max": 0.352938,
     "quality": "reported",
     "raw": "0.352937762",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.137164,
     "max": 0.137164,
     "quality": "reported",
     "raw": "0.1371645",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/40",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21106 G6",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 40,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106G6_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-17 107 00:23:45:244 ,Experiment: 5,Test Point: 21106G6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106G6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106G6_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-17 107 00:23:45:244 ,Experiment: 5,Test Point: 21106G6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106G6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2233.37,
     "max": 2233.37,
     "quality": "reported",
     "raw": "2233.365664",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "20",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "hot flame, the igniter stayed in the flame longer than others.",
     "quality": "reported",
     "raw": "hot flame, the igniter stayed in the flame longer than others.",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.2097,
     "max": 0.2097,
     "quality": "reported",
     "raw": "0.2097",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.208586,
     "max": 0.208586,
     "quality": "reported",
     "raw": "0.208586481",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 195,
     "max": 195,
     "quality": "reported",
     "raw": "195",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0878589,
     "max": 0.0878589,
     "quality": "reported",
     "raw": "0.087858915",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/41",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21106 G7",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 41,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106G7_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-17 107 00:40:07:716 ,Experiment: 5,Test Point: 21106G7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106G7_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106G7_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-17 107 00:40:07:716 ,Experiment: 5,Test Point: 21106G7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106G7_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2228.12,
     "max": 2228.12,
     "quality": "reported",
     "raw": "2228.11818",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "20",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "hot flame, the igniter stayed in the flame longer than others.",
     "quality": "reported",
     "raw": "hot flame, the igniter stayed in the flame longer than others.",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.208586,
     "max": 0.208586,
     "quality": "reported",
     "raw": "0.208586481",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.207474,
     "max": 0.207474,
     "quality": "reported",
     "raw": "0.207473561",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 204,
     "max": 204,
     "quality": "reported",
     "raw": "204",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0874454,
     "max": 0.0874454,
     "quality": "reported",
     "raw": "0.087445445",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/42",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21106 G9",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 42,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106G9_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-17 107 01:17:11:537 ,Experiment: 5,Test Point: 21106G9,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106G9_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106G9_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-17 107 01:17:11:537 ,Experiment: 5,Test Point: 21106G9,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106G9_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2222.83,
     "max": 2222.83,
     "quality": "reported",
     "raw": "2222.825542",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 14,
     "max": 14,
     "quality": "reported",
     "raw": "14",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "hot flame",
     "quality": "reported",
     "raw": "hot flame",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.207474,
     "max": 0.207474,
     "quality": "reported",
     "raw": "0.207473561",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.206695,
     "max": 0.206695,
     "quality": "reported",
     "raw": "0.206694811",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 129,
     "max": 129,
     "quality": "reported",
     "raw": "129",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0870317,
     "max": 0.0870317,
     "quality": "reported",
     "raw": "0.087031696",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/43",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21106 H1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 43,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106H1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-17 107 01:42:31:698 ,Experiment: 5,Test Point: 21106H1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106H1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106H1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-17 107 01:42:31:698 ,Experiment: 5,Test Point: 21106H1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106H1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2219.09,
     "max": 2219.09,
     "quality": "reported",
     "raw": "2219.09339",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.206695,
     "max": 0.206695,
     "quality": "reported",
     "raw": "0.206694811",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.206695,
     "max": 0.206695,
     "quality": "reported",
     "raw": "0.206694811",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0867419,
     "max": 0.0867419,
     "quality": "reported",
     "raw": "0.086741882",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/44",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21106 H2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 44,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106H2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-17 107 01:57:59:863 ,Experiment: 5,Test Point: 21106H2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106H2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21106H2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-17 107 01:57:59:863 ,Experiment: 5,Test Point: 21106H2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 24,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21106H2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2219.09,
     "max": 2219.09,
     "quality": "reported",
     "raw": "2219.09339",
     "column": "Tad (K)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "50% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.206695,
     "max": 0.206695,
     "quality": "reported",
     "raw": "0.206694811",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.206695,
     "max": 0.206695,
     "quality": "reported",
     "raw": "0.206694811",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0867419,
     "max": 0.0867419,
     "quality": "reported",
     "raw": "0.086741882",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/45",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21112A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 45,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112A1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 13:40:36:326 ,Experiment: 5,Test Point: 21112A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 7.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112A1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 13:40:36:326 ,Experiment: 5,Test Point: 21112A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 7.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2729.99,
     "max": 2729.99,
     "quality": "reported",
     "raw": "2729.986983",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 43,
     "max": 43,
     "quality": "reported",
     "raw": "43",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "1 bottle 100% propane",
     "quality": "reported",
     "raw": "1 bottle 100% propane",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.3954,
     "max": 0.3954,
     "quality": "reported",
     "raw": "0.3954",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.394045,
     "max": 0.394045,
     "quality": "reported",
     "raw": "0.3940449",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 513.075,
     "max": 513.075,
     "quality": "reported",
     "raw": "513.074689",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.105435,
     "max": 0.105435,
     "quality": "reported",
     "raw": "0.105434724",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/46",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21112 A2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 46,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112A2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 14:11:09:962 ,Experiment: 5,Test Point: 21112A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112A2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 14:11:09:962 ,Experiment: 5,Test Point: 21112A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2728.08,
     "max": 2728.08,
     "quality": "reported",
     "raw": "2728.07951",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 44,
     "max": 44,
     "quality": "reported",
     "raw": "44",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.6,
     "max": 1.6,
     "quality": "reported",
     "raw": "1.6",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394045,
     "max": 0.394045,
     "quality": "reported",
     "raw": "0.3940449",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.391274,
     "max": 0.391274,
     "quality": "reported",
     "raw": "0.391274328",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 306.401,
     "max": 306.401,
     "quality": "reported",
     "raw": "306.401465",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.105129,
     "max": 0.105129,
     "quality": "reported",
     "raw": "0.105128534",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/47",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21112 A3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 47,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112A3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 14:28:20:927 ,Experiment: 5,Test Point: 21112A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112A3_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 14:28:20:927 ,Experiment: 5,Test Point: 21112A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2724.15,
     "max": 2724.15,
     "quality": "reported",
     "raw": "2724.147584",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 95,
     "max": 95,
     "quality": "reported",
     "raw": "95",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.2,
     "max": 1.2,
     "quality": "reported",
     "raw": "1.2",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.391274,
     "max": 0.391274,
     "quality": "reported",
     "raw": "0.391274328",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.386795,
     "max": 0.386795,
     "quality": "reported",
     "raw": "0.386794842",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 423.012,
     "max": 423.012,
     "quality": "reported",
     "raw": "423.011622",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.104502,
     "max": 0.104502,
     "quality": "reported",
     "raw": "0.104501512",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/48",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21112 A4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 48,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112A4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 14:52:03:786 ,Experiment: 5,Test Point: 21112A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112A4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112A4_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 14:52:03:786 ,Experiment: 5,Test Point: 21112A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112A4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2717.7,
     "max": 2717.7,
     "quality": "reported",
     "raw": "2717.697955",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 185,
     "max": 185,
     "quality": "reported",
     "raw": "185",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.386795,
     "max": 0.386795,
     "quality": "reported",
     "raw": "0.386794842",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.379544,
     "max": 0.379544,
     "quality": "reported",
     "raw": "0.379543758",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 472.323,
     "max": 472.323,
     "quality": "reported",
     "raw": "472.323053",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.103485,
     "max": 0.103485,
     "quality": "reported",
     "raw": "0.103484882",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/49",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21112 A5",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 49,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112A5_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 15:11:37:947 ,Experiment: 5,Test Point: 21112A5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112A5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112A5_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 15:11:37:947 ,Experiment: 5,Test Point: 21112A5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112A5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2707.01,
     "max": 2707.01,
     "quality": "reported",
     "raw": "2707.007929",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 24,
     "max": 24,
     "quality": "reported",
     "raw": "24",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.379544,
     "max": 0.379544,
     "quality": "reported",
     "raw": "0.379543758",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.377664,
     "max": 0.377664,
     "quality": "reported",
     "raw": "0.377663625",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 201.343,
     "max": 201.343,
     "quality": "reported",
     "raw": "201.343312",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.101832,
     "max": 0.101832,
     "quality": "reported",
     "raw": "0.101831712",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/50",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21112 C1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 50,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112C1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 15:32:22:511 ,Experiment: 5,Test Point: 21112C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112C1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 15:32:22:511 ,Experiment: 5,Test Point: 21112C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2704.18,
     "max": 2704.18,
     "quality": "reported",
     "raw": "2704.18406",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 29,
     "max": 29,
     "quality": "reported",
     "raw": "29",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.377664,
     "max": 0.377664,
     "quality": "reported",
     "raw": "0.377663625",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.377096,
     "max": 0.377096,
     "quality": "reported",
     "raw": "0.37709578",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 529.294,
     "max": 529.294,
     "quality": "reported",
     "raw": "529.294181",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.101402,
     "max": 0.101402,
     "quality": "reported",
     "raw": "0.101401536",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/51",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21112 C2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 51,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112C2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 16:12:35:828 ,Experiment: 5,Test Point: 21112C2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112C2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112C2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 16:12:35:828 ,Experiment: 5,Test Point: 21112C2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112C2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2703.33,
     "max": 2703.33,
     "quality": "reported",
     "raw": "2703.326866",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 29,
     "max": 29,
     "quality": "reported",
     "raw": "29",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.377096,
     "max": 0.377096,
     "quality": "reported",
     "raw": "0.37709578",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.376528,
     "max": 0.376528,
     "quality": "reported",
     "raw": "0.376528047",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 529.871,
     "max": 529.871,
     "quality": "reported",
     "raw": "529.870579",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.101271,
     "max": 0.101271,
     "quality": "reported",
     "raw": "0.101271488",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/52",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21112 A6",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 52,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112A6_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 16:32:25:599 ,Experiment: 5,Test Point: 21112A6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112A6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112A6_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 16:32:25:599 ,Experiment: 5,Test Point: 21112A6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112A6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2702.47,
     "max": 2702.47,
     "quality": "reported",
     "raw": "2702.467823",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 259,
     "max": 259,
     "quality": "reported",
     "raw": "259",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.376528,
     "max": 0.376528,
     "quality": "reported",
     "raw": "0.376528047",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.366423,
     "max": 0.366423,
     "quality": "reported",
     "raw": "0.366422787",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 460.518,
     "max": 460.518,
     "quality": "reported",
     "raw": "460.517765",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.101141,
     "max": 0.101141,
     "quality": "reported",
     "raw": "0.101141409",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/53",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21112 C3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 53,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112C3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 16:51:39:762 ,Experiment: 5,Test Point: 21112C3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112C3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112C3_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 16:51:39:762 ,Experiment: 5,Test Point: 21112C3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112C3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2686.83,
     "max": 2686.83,
     "quality": "reported",
     "raw": "2686.828847",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.366423,
     "max": 0.366423,
     "quality": "reported",
     "raw": "0.366422787",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.366423,
     "max": 0.366423,
     "quality": "reported",
     "raw": "0.366422787",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0988164,
     "max": 0.0988164,
     "quality": "reported",
     "raw": "0.098816409",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/54",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21112 C4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 54,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112C4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 17:18:52:511 ,Experiment: 5,Test Point: 21112C4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112C4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112C4_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 17:18:52:511 ,Experiment: 5,Test Point: 21112C4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112C4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2686.83,
     "max": 2686.83,
     "quality": "reported",
     "raw": "2686.828847",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.366423,
     "max": 0.366423,
     "quality": "reported",
     "raw": "0.366422787",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.366423,
     "max": 0.366423,
     "quality": "reported",
     "raw": "0.366422787",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0988164,
     "max": 0.0988164,
     "quality": "reported",
     "raw": "0.098816409",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/55",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21112 C5",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 55,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112C5_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 17:30:49:386 ,Experiment: 5,Test Point: 21112C5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112C5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112C5_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 17:30:49:386 ,Experiment: 5,Test Point: 21112C5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112C5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2686.83,
     "max": 2686.83,
     "quality": "reported",
     "raw": "2686.828847",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.366423,
     "max": 0.366423,
     "quality": "reported",
     "raw": "0.366422787",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.366423,
     "max": 0.366423,
     "quality": "reported",
     "raw": "0.366422787",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0988164,
     "max": 0.0988164,
     "quality": "reported",
     "raw": "0.098816409",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/56",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21112 C6",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 56,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112C6_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 17:42:35:873 ,Experiment: 5,Test Point: 21112C6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112C6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112C6_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 17:42:35:873 ,Experiment: 5,Test Point: 21112C6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112C6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2686.83,
     "max": 2686.83,
     "quality": "reported",
     "raw": "2686.828847",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.366423,
     "max": 0.366423,
     "quality": "reported",
     "raw": "0.366422787",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.366423,
     "max": 0.366423,
     "quality": "reported",
     "raw": "0.366422787",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 94.4396,
     "max": 94.4396,
     "quality": "reported",
     "raw": "0.9443956",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0988164,
     "max": 0.0988164,
     "quality": "reported",
     "raw": "0.098816409",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/57",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21112 F1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 57,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112F1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 18:44:49:268 ,Experiment: 5,Test Point: 21112F1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112F1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 18:44:49:268 ,Experiment: 5,Test Point: 21112F1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2275.69,
     "max": 2275.69,
     "quality": "reported",
     "raw": "2275.686041",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.2125,
     "max": 0.2125,
     "quality": "reported",
     "raw": "0.2125",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.2125,
     "max": 0.2125,
     "quality": "reported",
     "raw": "0.2125",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0609819,
     "max": 0.0609819,
     "quality": "reported",
     "raw": "0.060981864",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/58",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21112 F2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 58,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112F2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 19:33:11:771 ,Experiment: 5,Test Point: 21112F2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112F2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112F2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 19:33:11:771 ,Experiment: 5,Test Point: 21112F2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112F2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2275.69,
     "max": 2275.69,
     "quality": "reported",
     "raw": "2275.686041",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.2125,
     "max": 0.2125,
     "quality": "reported",
     "raw": "0.2125",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.212225,
     "max": 0.212225,
     "quality": "reported",
     "raw": "0.212224743",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 95.099,
     "max": 95.099,
     "quality": "reported",
     "raw": "95.0990032",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0609819,
     "max": 0.0609819,
     "quality": "reported",
     "raw": "0.060981864",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/59",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21112 F3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 59,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112F3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 19:54:00:040 ,Experiment: 5,Test Point: 21112F3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112F3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112F3_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 19:54:00:040 ,Experiment: 5,Test Point: 21112F3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112F3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2274.41,
     "max": 2274.41,
     "quality": "reported",
     "raw": "2274.412146",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.212225,
     "max": 0.212225,
     "quality": "reported",
     "raw": "0.212224743",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.212005,
     "max": 0.212005,
     "quality": "reported",
     "raw": "0.212004554",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 105.264,
     "max": 105.264,
     "quality": "reported",
     "raw": "105.264091",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0609099,
     "max": 0.0609099,
     "quality": "reported",
     "raw": "0.060909858",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/60",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21112 F4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 60,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112F4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 20:39:57:962 ,Experiment: 5,Test Point: 21112F4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112F4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112F4_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 20:39:57:962 ,Experiment: 5,Test Point: 21112F4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112F4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2273.39,
     "max": 2273.39,
     "quality": "reported",
     "raw": "2273.390966",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.6,
     "max": 0.6,
     "quality": "reported",
     "raw": "0.6",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.212005,
     "max": 0.212005,
     "quality": "reported",
     "raw": "0.212004554",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.211798,
     "max": 0.211798,
     "quality": "reported",
     "raw": "0.211798144",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 136.737,
     "max": 136.737,
     "quality": "reported",
     "raw": "136.737387",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0608522,
     "max": 0.0608522,
     "quality": "reported",
     "raw": "0.060852246",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/61",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21112 F5",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 61,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112F5_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 22:21:02:565 ,Experiment: 5,Test Point: 21112F5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112F5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112F5_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 22:21:02:565 ,Experiment: 5,Test Point: 21112F5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112F5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2272.43,
     "max": 2272.43,
     "quality": "reported",
     "raw": "2272.431946",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.211798,
     "max": 0.211798,
     "quality": "reported",
     "raw": "0.211798144",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.211798,
     "max": 0.211798,
     "quality": "reported",
     "raw": "0.211798144",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0607982,
     "max": 0.0607982,
     "quality": "reported",
     "raw": "0.060798229",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/62",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21112 H1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 62,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112H1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 22:34:23:634 ,Experiment: 5,Test Point: 21112H1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112H1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112H1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 22:34:23:634 ,Experiment: 5,Test Point: 21112H1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112H1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2272.43,
     "max": 2272.43,
     "quality": "reported",
     "raw": "2272.431946",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 12,
     "max": 12,
     "quality": "reported",
     "raw": "12",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.211798,
     "max": 0.211798,
     "quality": "reported",
     "raw": "0.211798144",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.211592,
     "max": 0.211592,
     "quality": "reported",
     "raw": "0.211591749",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 154.162,
     "max": 154.162,
     "quality": "reported",
     "raw": "154.162132",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0607982,
     "max": 0.0607982,
     "quality": "reported",
     "raw": "0.060798229",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/63",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21112 H2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 63,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112H2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 22:45:48:103 ,Experiment: 5,Test Point: 21112H2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112H2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112H2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 22:45:48:103 ,Experiment: 5,Test Point: 21112H2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112H2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2271.47,
     "max": 2271.47,
     "quality": "reported",
     "raw": "2271.471317",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 11,
     "max": 11,
     "quality": "reported",
     "raw": "11",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.211592,
     "max": 0.211592,
     "quality": "reported",
     "raw": "0.211591749",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.211403,
     "max": 0.211403,
     "quality": "reported",
     "raw": "0.211402567",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 155.395,
     "max": 155.395,
     "quality": "reported",
     "raw": "155.395419",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0607442,
     "max": 0.0607442,
     "quality": "reported",
     "raw": "0.060744207",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/64",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21112 H3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 64,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112H3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 22:56:08:088 ,Experiment: 5,Test Point: 21112H3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112H3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21112H3_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-04-22 112 22:56:08:088 ,Experiment: 5,Test Point: 21112H3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 19,MFCA3 Full Scale: 0.200000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21112H3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2270.59,
     "max": 2270.59,
     "quality": "reported",
     "raw": "2270.589322",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.211403,
     "max": 0.211403,
     "quality": "reported",
     "raw": "0.211402567",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.211403,
     "max": 0.211403,
     "quality": "reported",
     "raw": "0.211402567",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.0606947,
     "max": 0.0606947,
     "quality": "reported",
     "raw": "0.060694682",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/65",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 65,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125A1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 16:07:36:513 ,Experiment: 5,Test Point: 21125A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125A1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 16:07:36:513 ,Experiment: 5,Test Point: 21125A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1596.02,
     "max": 1596.02,
     "quality": "reported",
     "raw": "1596.02196",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.02385,
     "max": 0.02385,
     "quality": "reported",
     "raw": "0.02385",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "1 bottle 1 day, 30% butane, 1 timer reset",
     "quality": "reported",
     "raw": "1 bottle 1 day, 30% butane, 1 timer reset",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.3945,
     "max": 0.3945,
     "quality": "reported",
     "raw": "0.3945",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.3945,
     "max": 0.3945,
     "quality": "reported",
     "raw": "0.3945",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.711922,
     "max": 0.711922,
     "quality": "reported",
     "raw": "0.711921718",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/66",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 A2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 66,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125A2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 16:30:02:764 ,Experiment: 5,Test Point: 21125A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125A2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 16:30:02:764 ,Experiment: 5,Test Point: 21125A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1795.23,
     "max": 1795.23,
     "quality": "reported",
     "raw": "1795.234249",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.031,
     "max": 0.031,
     "quality": "reported",
     "raw": "0.031",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.3945,
     "max": 0.3945,
     "quality": "reported",
     "raw": "0.3945",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.65701,
     "max": 0.65701,
     "quality": "reported",
     "raw": "0.657009788",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/67",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 A3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 67,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125A3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 16:44:08:638 ,Experiment: 5,Test Point: 21125A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125A3_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 16:44:08:638 ,Experiment: 5,Test Point: 21125A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1695.06,
     "max": 1695.06,
     "quality": "reported",
     "raw": "1695.058747",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.02717,
     "max": 0.02717,
     "quality": "reported",
     "raw": "0.02717",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.685025,
     "max": 0.685025,
     "quality": "reported",
     "raw": "0.685025373",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/68",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 A4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 68,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "adiabatic_flame_temp_k": {
     "text": "#DIV/0!",
     "quality": "reported",
     "raw": "#DIV/0!",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "text": "#DIV/0!",
     "quality": "reported",
     "raw": "#DIV/0!",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/69",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 A5",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 69,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125A5_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 17:24:12:258 ,Experiment: 5,Test Point: 21125A5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125A5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125A5_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 17:24:12:258 ,Experiment: 5,Test Point: 21125A5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125A5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1695.06,
     "max": 1695.06,
     "quality": "reported",
     "raw": "1695.058747",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.02717,
     "max": 0.02717,
     "quality": "reported",
     "raw": "0.02717",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.685025,
     "max": 0.685025,
     "quality": "reported",
     "raw": "0.685025373",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/70",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 A6",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 70,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125A6_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 17:44:20:826 ,Experiment: 5,Test Point: 21125A6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125A6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125A6_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 17:44:20:826 ,Experiment: 5,Test Point: 21125A6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125A6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1695.06,
     "max": 1695.06,
     "quality": "reported",
     "raw": "1695.058747",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.02717,
     "max": 0.02717,
     "quality": "reported",
     "raw": "0.02717",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.685025,
     "max": 0.685025,
     "quality": "reported",
     "raw": "0.685025373",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/71",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 A7",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 71,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125A7_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 18:35:01:137 ,Experiment: 5,Test Point: 21125A7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125A7_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125A7_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 18:35:01:137 ,Experiment: 5,Test Point: 21125A7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125A7_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1695.06,
     "max": 1695.06,
     "quality": "reported",
     "raw": "1695.058747",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.02717,
     "max": 0.02717,
     "quality": "reported",
     "raw": "0.02717",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.685025,
     "max": 0.685025,
     "quality": "reported",
     "raw": "0.685025373",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/72",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 A8",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 72,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125A8_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 18:50:52:612 ,Experiment: 5,Test Point: 21125A8,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125A8_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125A8_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 18:50:52:612 ,Experiment: 5,Test Point: 21125A8,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125A8_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1695.06,
     "max": 1695.06,
     "quality": "reported",
     "raw": "1695.058747",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.02717,
     "max": 0.02717,
     "quality": "reported",
     "raw": "0.02717",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.685025,
     "max": 0.685025,
     "quality": "reported",
     "raw": "0.685025373",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/73",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 A9",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 73,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125A9_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 19:12:05:564 ,Experiment: 5,Test Point: 21125A9,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125A9_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125A9_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 19:12:05:564 ,Experiment: 5,Test Point: 21125A9,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125A9_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1695.06,
     "max": 1695.06,
     "quality": "reported",
     "raw": "1695.058747",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.36,
     "max": 2.36,
     "quality": "reported",
     "raw": "2.36",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.02717,
     "max": 0.02717,
     "quality": "reported",
     "raw": "0.02717",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.685025,
     "max": 0.685025,
     "quality": "reported",
     "raw": "0.685025373",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/74",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 H1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 74,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125H1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 20:30:28:404 ,Experiment: 5,Test Point: 21125H1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125H1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125H1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 20:30:28:404 ,Experiment: 5,Test Point: 21125H1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125H1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1695.06,
     "max": 1695.06,
     "quality": "reported",
     "raw": "1695.058747",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.02717,
     "max": 0.02717,
     "quality": "reported",
     "raw": "0.02717",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.685025,
     "max": 0.685025,
     "quality": "reported",
     "raw": "0.685025373",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/75",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 H2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 75,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125H2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 20:55:53:341 ,Experiment: 5,Test Point: 21125H2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125H2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125H2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 20:55:53:341 ,Experiment: 5,Test Point: 21125H2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125H2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1695.06,
     "max": 1695.06,
     "quality": "reported",
     "raw": "1695.058747",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.02717,
     "max": 0.02717,
     "quality": "reported",
     "raw": "0.02717",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.685025,
     "max": 0.685025,
     "quality": "reported",
     "raw": "0.685025373",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/76",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 H3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 76,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "adiabatic_flame_temp_k": {
     "text": "#DIV/0!",
     "quality": "reported",
     "raw": "#DIV/0!",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "text": "#DIV/0!",
     "quality": "reported",
     "raw": "#DIV/0!",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/77",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 H4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 77,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125H4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 21:27:59:770 ,Experiment: 5,Test Point: 21125H4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125H4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125H4_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 21:27:59:770 ,Experiment: 5,Test Point: 21125H4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125H4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1695.06,
     "max": 1695.06,
     "quality": "reported",
     "raw": "1695.058747",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.02717,
     "max": 0.02717,
     "quality": "reported",
     "raw": "0.02717",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.685025,
     "max": 0.685025,
     "quality": "reported",
     "raw": "0.685025373",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/78",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 J1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 78,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125J1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 21:59:43:481 ,Experiment: 5,Test Point: 21125J1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125J1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125J1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 21:59:43:481 ,Experiment: 5,Test Point: 21125J1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125J1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1397.03,
     "max": 1397.03,
     "quality": "reported",
     "raw": "1397.031071",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.01827,
     "max": 0.01827,
     "quality": "reported",
     "raw": "0.01827",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.762146,
     "max": 0.762146,
     "quality": "reported",
     "raw": "0.762145755",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/79",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 H5",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 79,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125H5_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 22:17:44:051 ,Experiment: 5,Test Point: 21125H5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125H5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125H5_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 22:17:44:051 ,Experiment: 5,Test Point: 21125H5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125H5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1695.06,
     "max": 1695.06,
     "quality": "reported",
     "raw": "1695.058747",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.1,
     "max": 0.1,
     "quality": "reported",
     "raw": "0.1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.02717,
     "max": 0.02717,
     "quality": "reported",
     "raw": "0.02717",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.685025,
     "max": 0.685025,
     "quality": "reported",
     "raw": "0.685025373",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/80",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 K1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 80,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125K1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 22:36:12:496 ,Experiment: 5,Test Point: 21125K1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125K1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125K1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 22:36:12:496 ,Experiment: 5,Test Point: 21125K1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125K1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1794.86,
     "max": 1794.86,
     "quality": "reported",
     "raw": "1794.86369",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 35,
     "max": 35,
     "quality": "reported",
     "raw": "35",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.031,
     "max": 0.031,
     "quality": "reported",
     "raw": "0.031",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394119,
     "max": 0.394119,
     "quality": "reported",
     "raw": "0.394118729",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.389157,
     "max": 0.389157,
     "quality": "reported",
     "raw": "0.389156864",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 227,
     "max": 227,
     "quality": "reported",
     "raw": "227",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.656803,
     "max": 0.656803,
     "quality": "reported",
     "raw": "0.656803436",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/81",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 K2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 81,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125K2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 22:51:33:284 ,Experiment: 5,Test Point: 21125K2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125K2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125K2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 22:51:33:284 ,Experiment: 5,Test Point: 21125K2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125K2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1789.99,
     "max": 1789.99,
     "quality": "reported",
     "raw": "1789.988936",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 17,
     "max": 17,
     "quality": "reported",
     "raw": "17",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 3,
     "max": 3,
     "quality": "reported",
     "raw": "3",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.031,
     "max": 0.031,
     "quality": "reported",
     "raw": "0.031",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.389157,
     "max": 0.389157,
     "quality": "reported",
     "raw": "0.389156864",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.384376,
     "max": 0.384376,
     "quality": "reported",
     "raw": "0.38437638",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 116,
     "max": 116,
     "quality": "reported",
     "raw": "116",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.654093,
     "max": 0.654093,
     "quality": "reported",
     "raw": "0.654093183",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/82",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 K3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 82,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125K3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 23:01:47:034 ,Experiment: 5,Test Point: 21125K3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125K3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125K3_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 23:01:47:034 ,Experiment: 5,Test Point: 21125K3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125K3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1785.2,
     "max": 1785.2,
     "quality": "reported",
     "raw": "1785.198679",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 125,
     "max": 125,
     "quality": "reported",
     "raw": "125",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.031,
     "max": 0.031,
     "quality": "reported",
     "raw": "0.031",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.384376,
     "max": 0.384376,
     "quality": "reported",
     "raw": "0.38437638",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.375721,
     "max": 0.375721,
     "quality": "reported",
     "raw": "0.375720569",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 481,
     "max": 481,
     "quality": "reported",
     "raw": "481",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.651438,
     "max": 0.651438,
     "quality": "reported",
     "raw": "0.651437692",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/83",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 D1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 83,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125D1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 23:52:59:214 ,Experiment: 5,Test Point: 21125D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125D1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125D1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-05 125 23:52:59:214 ,Experiment: 5,Test Point: 21125D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125D1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1700.97,
     "max": 1700.97,
     "quality": "reported",
     "raw": "1700.967256",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.045,
     "max": 0.045,
     "quality": "reported",
     "raw": "0.045",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.2111,
     "max": 0.2111,
     "quality": "reported",
     "raw": "0.2111",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.211072,
     "max": 0.211072,
     "quality": "reported",
     "raw": "0.211072309",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 34,
     "max": 34,
     "quality": "reported",
     "raw": "34",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.423482,
     "max": 0.423482,
     "quality": "reported",
     "raw": "0.42348241",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/84",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 D2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 84,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125D2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-06 126 00:08:54:280 ,Experiment: 5,Test Point: 21125D2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125D2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125D2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-06 126 00:08:54:280 ,Experiment: 5,Test Point: 21125D2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125D2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1700.88,
     "max": 1700.88,
     "quality": "reported",
     "raw": "1700.883051",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.045,
     "max": 0.045,
     "quality": "reported",
     "raw": "0.045",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.211072,
     "max": 0.211072,
     "quality": "reported",
     "raw": "0.211072309",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.211045,
     "max": 0.211045,
     "quality": "reported",
     "raw": "0.211044619",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 32,
     "max": 32,
     "quality": "reported",
     "raw": "32",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.423451,
     "max": 0.423451,
     "quality": "reported",
     "raw": "0.423451316",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/85",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 D3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 85,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125D3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-06 126 00:21:30:441 ,Experiment: 5,Test Point: 21125D3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125D3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125D3_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-06 126 00:21:30:441 ,Experiment: 5,Test Point: 21125D3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125D3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1700.8,
     "max": 1700.8,
     "quality": "reported",
     "raw": "1700.798838",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.045,
     "max": 0.045,
     "quality": "reported",
     "raw": "0.045",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.211045,
     "max": 0.211045,
     "quality": "reported",
     "raw": "0.211044619",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.211045,
     "max": 0.211045,
     "quality": "reported",
     "raw": "0.211044619",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.42342,
     "max": 0.42342,
     "quality": "reported",
     "raw": "0.423420221",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/86",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 D4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 86,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125D4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-06 126 00:32:33:014 ,Experiment: 5,Test Point: 21125D4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125D4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125D4_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-06 126 00:32:33:014 ,Experiment: 5,Test Point: 21125D4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125D4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1700.8,
     "max": 1700.8,
     "quality": "reported",
     "raw": "1700.798838",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.045,
     "max": 0.045,
     "quality": "reported",
     "raw": "0.045",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.211045,
     "max": 0.211045,
     "quality": "reported",
     "raw": "0.211044619",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.211045,
     "max": 0.211045,
     "quality": "reported",
     "raw": "0.211044619",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.42342,
     "max": 0.42342,
     "quality": "reported",
     "raw": "0.423420221",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/87",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 D5",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 87,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125D5_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-06 126 00:42:32:704 ,Experiment: 5,Test Point: 21125D5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125D5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125D5_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-06 126 00:42:32:704 ,Experiment: 5,Test Point: 21125D5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125D5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1700.8,
     "max": 1700.8,
     "quality": "reported",
     "raw": "1700.798838",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.045,
     "max": 0.045,
     "quality": "reported",
     "raw": "0.045",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.211045,
     "max": 0.211045,
     "quality": "reported",
     "raw": "0.211044619",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.211045,
     "max": 0.211045,
     "quality": "reported",
     "raw": "0.211044619",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.42342,
     "max": 0.42342,
     "quality": "reported",
     "raw": "0.423420221",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/88",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21125 D6",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 88,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125D6_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-06 126 01:01:51:256 ,Experiment: 5,Test Point: 21125D6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125D6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21125D6_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-06 126 01:01:51:256 ,Experiment: 5,Test Point: 21125D6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21125D6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1700.8,
     "max": 1700.8,
     "quality": "reported",
     "raw": "1700.798838",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.045,
     "max": 0.045,
     "quality": "reported",
     "raw": "0.045",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.211045,
     "max": 0.211045,
     "quality": "reported",
     "raw": "0.211044619",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.211045,
     "max": 0.211045,
     "quality": "reported",
     "raw": "0.211044619",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.42342,
     "max": 0.42342,
     "quality": "reported",
     "raw": "0.423420221",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/89",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 89,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130A1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 15:05:40:916 ,Experiment: 5,Test Point: 21130A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130A1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 15:05:40:916 ,Experiment: 5,Test Point: 21130A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1601.9,
     "max": 1601.9,
     "quality": "reported",
     "raw": "1601.904915",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.04742,
     "max": 0.04742,
     "quality": "reported",
     "raw": "0.04742",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "1 bottle 2 days, 30% propane, no timer resets through day 10",
     "quality": "reported",
     "raw": "1 bottle 2 days, 30% propane, no timer resets through day 10",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.2107,
     "max": 0.2107,
     "quality": "reported",
     "raw": "0.2107",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.210685,
     "max": 0.210685,
     "quality": "reported",
     "raw": "0.210684692",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 39.4669,
     "max": 39.4669,
     "quality": "reported",
     "raw": "39.4668576",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.469858,
     "max": 0.469858,
     "quality": "reported",
     "raw": "0.469857755",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/90",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 A2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 90,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130A2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 15:23:06:178 ,Experiment: 5,Test Point: 21130A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130A2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 15:23:06:178 ,Experiment: 5,Test Point: 21130A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1601.86,
     "max": 1601.86,
     "quality": "reported",
     "raw": "1601.863831",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.04742,
     "max": 0.04742,
     "quality": "reported",
     "raw": "0.04742",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.210685,
     "max": 0.210685,
     "quality": "reported",
     "raw": "0.210684692",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.210654,
     "max": 0.210654,
     "quality": "reported",
     "raw": "0.210654078",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 34.3184,
     "max": 34.3184,
     "quality": "reported",
     "raw": "34.3184151",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.46984,
     "max": 0.46984,
     "quality": "reported",
     "raw": "0.469840184",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/91",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 A3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 91,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130A3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 16:18:14:978 ,Experiment: 5,Test Point: 21130A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130A3_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 16:18:14:978 ,Experiment: 5,Test Point: 21130A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1601.78,
     "max": 1601.78,
     "quality": "reported",
     "raw": "1601.781659",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.04742,
     "max": 0.04742,
     "quality": "reported",
     "raw": "0.04742",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.210654,
     "max": 0.210654,
     "quality": "reported",
     "raw": "0.210654078",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.210654,
     "max": 0.210654,
     "quality": "reported",
     "raw": "0.210654078",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.469805,
     "max": 0.469805,
     "quality": "reported",
     "raw": "0.46980504",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/92",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 A4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 92,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130A4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 17:21:11:389 ,Experiment: 5,Test Point: 21130A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130A4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130A4_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 17:21:11:389 ,Experiment: 5,Test Point: 21130A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130A4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1601.78,
     "max": 1601.78,
     "quality": "reported",
     "raw": "1601.781659",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.04742,
     "max": 0.04742,
     "quality": "reported",
     "raw": "0.04742",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.210654,
     "max": 0.210654,
     "quality": "reported",
     "raw": "0.210654078",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.210654,
     "max": 0.210654,
     "quality": "reported",
     "raw": "0.210654078",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.469805,
     "max": 0.469805,
     "quality": "reported",
     "raw": "0.46980504",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/93",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 A5",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 93,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130A5_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 18:04:04:687 ,Experiment: 5,Test Point: 21130A5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130A5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130A5_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 18:04:04:687 ,Experiment: 5,Test Point: 21130A5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130A5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1601.78,
     "max": 1601.78,
     "quality": "reported",
     "raw": "1601.781659",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.04742,
     "max": 0.04742,
     "quality": "reported",
     "raw": "0.04742",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.210654,
     "max": 0.210654,
     "quality": "reported",
     "raw": "0.210654078",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.210623,
     "max": 0.210623,
     "quality": "reported",
     "raw": "0.210623465",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 34.0835,
     "max": 34.0835,
     "quality": "reported",
     "raw": "34.0834658",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.469805,
     "max": 0.469805,
     "quality": "reported",
     "raw": "0.46980504",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/94",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 A6",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 94,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130A6_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 18:25:14:734 ,Experiment: 5,Test Point: 21130A6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130A6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130A6_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 18:25:14:734 ,Experiment: 5,Test Point: 21130A6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130A6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1601.7,
     "max": 1601.7,
     "quality": "reported",
     "raw": "1601.699478",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.04742,
     "max": 0.04742,
     "quality": "reported",
     "raw": "0.04742",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.210623,
     "max": 0.210623,
     "quality": "reported",
     "raw": "0.210623465",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.210623,
     "max": 0.210623,
     "quality": "reported",
     "raw": "0.210623465",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.46977,
     "max": 0.46977,
     "quality": "reported",
     "raw": "0.469769893",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/95",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 A7",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 95,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130A7_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 18:39:13:709 ,Experiment: 5,Test Point: 21130A7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130A7_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130A7_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 18:39:13:709 ,Experiment: 5,Test Point: 21130A7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130A7_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1601.7,
     "max": 1601.7,
     "quality": "reported",
     "raw": "1601.699478",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.04742,
     "max": 0.04742,
     "quality": "reported",
     "raw": "0.04742",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.210623,
     "max": 0.210623,
     "quality": "reported",
     "raw": "0.210623465",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.210623,
     "max": 0.210623,
     "quality": "reported",
     "raw": "0.210623465",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.46977,
     "max": 0.46977,
     "quality": "reported",
     "raw": "0.469769893",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/96",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 A8",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 96,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130A8_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 18:54:54:258 ,Experiment: 5,Test Point: 21130A8,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130A8_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130A8_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 18:54:54:258 ,Experiment: 5,Test Point: 21130A8,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130A8_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1601.7,
     "max": 1601.7,
     "quality": "reported",
     "raw": "1601.699478",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.89,
     "max": 2.89,
     "quality": "reported",
     "raw": "2.89",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.04742,
     "max": 0.04742,
     "quality": "reported",
     "raw": "0.04742",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.210623,
     "max": 0.210623,
     "quality": "reported",
     "raw": "0.210623465",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.210623,
     "max": 0.210623,
     "quality": "reported",
     "raw": "0.210623465",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.46977,
     "max": 0.46977,
     "quality": "reported",
     "raw": "0.469769893",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/97",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 A9",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 97,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "adiabatic_flame_temp_k": {
     "min": 1601.7,
     "max": 1601.7,
     "quality": "reported",
     "raw": "1601.699478",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.04742,
     "max": 0.04742,
     "quality": "reported",
     "raw": "0.04742",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.210623,
     "max": 0.210623,
     "quality": "reported",
     "raw": "0.210623465",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.210616,
     "max": 0.210616,
     "quality": "reported",
     "raw": "0.210615813",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 137.819,
     "max": 137.819,
     "quality": "reported",
     "raw": "137.818721",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.46977,
     "max": 0.46977,
     "quality": "reported",
     "raw": "0.469769893",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/98",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 M1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 98,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130M1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 19:41:35:044 ,Experiment: 5,Test Point: 21130M1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130M1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130M1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 19:41:35:044 ,Experiment: 5,Test Point: 21130M1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130M1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2171.01,
     "max": 2171.01,
     "quality": "reported",
     "raw": "2171.011986",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "6",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.210616,
     "max": 0.210616,
     "quality": "reported",
     "raw": "0.210615813",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.210503,
     "max": 0.210503,
     "quality": "reported",
     "raw": "0.21050331",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 65.1466,
     "max": 65.1466,
     "quality": "reported",
     "raw": "65.14664623",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.137791,
     "max": 0.137791,
     "quality": "reported",
     "raw": "0.13779061",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/99",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 M2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 99,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130M2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 19:58:02:018 ,Experiment: 5,Test Point: 21130M2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130M2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130M2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 19:58:02:018 ,Experiment: 5,Test Point: 21130M2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130M2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2170.5,
     "max": 2170.5,
     "quality": "reported",
     "raw": "2170.499473",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "7",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.210503,
     "max": 0.210503,
     "quality": "reported",
     "raw": "0.21050331",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.210241,
     "max": 0.210241,
     "quality": "reported",
     "raw": "0.210240854",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 56.6446,
     "max": 56.6446,
     "quality": "reported",
     "raw": "56.64455108",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.137729,
     "max": 0.137729,
     "quality": "reported",
     "raw": "0.137728991",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/100",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 M3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 100,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130M3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 20:11:13:380 ,Experiment: 5,Test Point: 21130M3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130M3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130M3_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 20:11:13:380 ,Experiment: 5,Test Point: 21130M3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130M3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2169.3,
     "max": 2169.3,
     "quality": "reported",
     "raw": "2169.302145",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.210241,
     "max": 0.210241,
     "quality": "reported",
     "raw": "0.210240854",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.210194,
     "max": 0.210194,
     "quality": "reported",
     "raw": "0.210193989",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 69.4472,
     "max": 69.4472,
     "quality": "reported",
     "raw": "69.44720456",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.137585,
     "max": 0.137585,
     "quality": "reported",
     "raw": "0.137585197",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/101",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 G1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 101,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130G1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 20:50:28:278 ,Experiment: 5,Test Point: 21130G1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130G1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130G1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 20:50:28:278 ,Experiment: 5,Test Point: 21130G1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130G1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1617.73,
     "max": 1617.73,
     "quality": "reported",
     "raw": "1617.733857",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.04742,
     "max": 0.04742,
     "quality": "reported",
     "raw": "0.04742",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.2167,
     "max": 0.2167,
     "quality": "reported",
     "raw": "0.2167",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.2167,
     "max": 0.2167,
     "quality": "reported",
     "raw": "0.2167",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 303.99,
     "max": 303.99,
     "quality": "reported",
     "raw": "3.0399",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.476651,
     "max": 0.476651,
     "quality": "reported",
     "raw": "0.476650698",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/102",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 G2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 102,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130G2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 21:15:50:930 ,Experiment: 5,Test Point: 21130G2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130G2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130G2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 21:15:50:930 ,Experiment: 5,Test Point: 21130G2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130G2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1617.73,
     "max": 1617.73,
     "quality": "reported",
     "raw": "1617.733857",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.04742,
     "max": 0.04742,
     "quality": "reported",
     "raw": "0.04742",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.2167,
     "max": 0.2167,
     "quality": "reported",
     "raw": "0.2167",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.21669,
     "max": 0.21669,
     "quality": "reported",
     "raw": "0.216689654",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 35.7849,
     "max": 35.7849,
     "quality": "reported",
     "raw": "35.7849125",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 303.99,
     "max": 303.99,
     "quality": "reported",
     "raw": "3.0399",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.476651,
     "max": 0.476651,
     "quality": "reported",
     "raw": "0.476650698",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/103",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 G3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 103,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130G3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 21:31:54:985 ,Experiment: 5,Test Point: 21130G3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130G3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130G3_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 21:31:54:985 ,Experiment: 5,Test Point: 21130G3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130G3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1617.71,
     "max": 1617.71,
     "quality": "reported",
     "raw": "1617.707026",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.04742,
     "max": 0.04742,
     "quality": "reported",
     "raw": "0.04742",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21669,
     "max": 0.21669,
     "quality": "reported",
     "raw": "0.216689654",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.216669,
     "max": 0.216669,
     "quality": "reported",
     "raw": "0.216668964",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 33.3446,
     "max": 33.3446,
     "quality": "reported",
     "raw": "33.34455353",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 303.99,
     "max": 303.99,
     "quality": "reported",
     "raw": "3.0399",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.476639,
     "max": 0.476639,
     "quality": "reported",
     "raw": "0.476639145",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/104",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 G4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 104,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130G4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 21:54:41:724 ,Experiment: 5,Test Point: 21130G4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130G4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130G4_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 21:54:41:724 ,Experiment: 5,Test Point: 21130G4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130G4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1617.65,
     "max": 1617.65,
     "quality": "reported",
     "raw": "1617.653362",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.04742,
     "max": 0.04742,
     "quality": "reported",
     "raw": "0.04742",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.216669,
     "max": 0.216669,
     "quality": "reported",
     "raw": "0.216668964",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.216669,
     "max": 0.216669,
     "quality": "reported",
     "raw": "0.216668964",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 303.99,
     "max": 303.99,
     "quality": "reported",
     "raw": "3.0399",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.476616,
     "max": 0.476616,
     "quality": "reported",
     "raw": "0.476616037",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/105",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 G5",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 105,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130G5_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 22:11:31:204 ,Experiment: 5,Test Point: 21130G5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130G5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130G5_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 22:11:31:204 ,Experiment: 5,Test Point: 21130G5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130G5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1617.65,
     "max": 1617.65,
     "quality": "reported",
     "raw": "1617.653362",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.89,
     "max": 2.89,
     "quality": "reported",
     "raw": "2.89",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.04742,
     "max": 0.04742,
     "quality": "reported",
     "raw": "0.04742",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.216669,
     "max": 0.216669,
     "quality": "reported",
     "raw": "0.216668964",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.216669,
     "max": 0.216669,
     "quality": "reported",
     "raw": "0.216668964",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 303.99,
     "max": 303.99,
     "quality": "reported",
     "raw": "3.0399",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.476616,
     "max": 0.476616,
     "quality": "reported",
     "raw": "0.476616037",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/106",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 G6",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 106,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130G6_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 22:23:29:679 ,Experiment: 5,Test Point: 21130G6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130G6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130G6_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 22:23:29:679 ,Experiment: 5,Test Point: 21130G6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130G6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1617.65,
     "max": 1617.65,
     "quality": "reported",
     "raw": "1617.653362",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.04742,
     "max": 0.04742,
     "quality": "reported",
     "raw": "0.04742",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.216669,
     "max": 0.216669,
     "quality": "reported",
     "raw": "0.216668964",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.216664,
     "max": 0.216664,
     "quality": "reported",
     "raw": "0.216663791",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 34.0327,
     "max": 34.0327,
     "quality": "reported",
     "raw": "34.03266412",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 303.99,
     "max": 303.99,
     "quality": "reported",
     "raw": "3.0399",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.476616,
     "max": 0.476616,
     "quality": "reported",
     "raw": "0.476616037",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/107",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 G7",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 107,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130G7_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 22:52:45:842 ,Experiment: 5,Test Point: 21130G7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130G7_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130G7_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 22:52:45:842 ,Experiment: 5,Test Point: 21130G7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130G7_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 1617.64,
     "max": 1617.64,
     "quality": "reported",
     "raw": "1617.639945",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.125,
     "max": 0.125,
     "quality": "reported",
     "raw": "0.125",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.04742,
     "max": 0.04742,
     "quality": "reported",
     "raw": "0.04742",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.216664,
     "max": 0.216664,
     "quality": "reported",
     "raw": "0.216663791",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.216661,
     "max": 0.216661,
     "quality": "reported",
     "raw": "0.216661205",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 36.9233,
     "max": 36.9233,
     "quality": "reported",
     "raw": "36.92329563",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 303.99,
     "max": 303.99,
     "quality": "reported",
     "raw": "3.0399",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.47661,
     "max": 0.47661,
     "quality": "reported",
     "raw": "0.47661026",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/108",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 N1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 108,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130N1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 23:23:27:559 ,Experiment: 5,Test Point: 21130N1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130N1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130N1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 23:23:27:559 ,Experiment: 5,Test Point: 21130N1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130N1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2197.92,
     "max": 2197.92,
     "quality": "reported",
     "raw": "2197.919365",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "6",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.216661,
     "max": 0.216661,
     "quality": "reported",
     "raw": "0.216661205",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.216586,
     "max": 0.216586,
     "quality": "reported",
     "raw": "0.216585869",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 72.6927,
     "max": 72.6927,
     "quality": "reported",
     "raw": "72.69266247",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 303.99,
     "max": 303.99,
     "quality": "reported",
     "raw": "3.0399",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.141086,
     "max": 0.141086,
     "quality": "reported",
     "raw": "0.141086088",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/109",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 N2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 109,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130N2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 23:39:03:147 ,Experiment: 5,Test Point: 21130N2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130N2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130N2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-10 130 23:39:03:147 ,Experiment: 5,Test Point: 21130N2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130N2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2197.59,
     "max": 2197.59,
     "quality": "reported",
     "raw": "2197.591604",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "6",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.216586,
     "max": 0.216586,
     "quality": "reported",
     "raw": "0.216585869",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.216435,
     "max": 0.216435,
     "quality": "reported",
     "raw": "0.216435213",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 56.8326,
     "max": 56.8326,
     "quality": "reported",
     "raw": "56.83256973",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 303.99,
     "max": 303.99,
     "quality": "reported",
     "raw": "3.0399",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.141045,
     "max": 0.141045,
     "quality": "reported",
     "raw": "0.141045209",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/110",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 N3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 110,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130N3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-11 131 01:11:41:380 ,Experiment: 5,Test Point: 21130N3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130N3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130N3_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-11 131 01:11:41:380 ,Experiment: 5,Test Point: 21130N3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130N3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2196.94,
     "max": 2196.94,
     "quality": "reported",
     "raw": "2196.935588",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.216435,
     "max": 0.216435,
     "quality": "reported",
     "raw": "0.216435213",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.216404,
     "max": 0.216404,
     "quality": "reported",
     "raw": "0.216403828",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 89.4485,
     "max": 89.4485,
     "quality": "reported",
     "raw": "89.44847822",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 303.99,
     "max": 303.99,
     "quality": "reported",
     "raw": "3.0399",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.140963,
     "max": 0.140963,
     "quality": "reported",
     "raw": "0.140963446",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/111",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 N4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 111,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130N4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-11 131 01:53:29:803 ,Experiment: 5,Test Point: 21130N4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130N4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130N4_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-11 131 01:53:29:803 ,Experiment: 5,Test Point: 21130N4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130N4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2196.8,
     "max": 2196.8,
     "quality": "reported",
     "raw": "2196.798826",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.216404,
     "max": 0.216404,
     "quality": "reported",
     "raw": "0.216403828",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.216372,
     "max": 0.216372,
     "quality": "reported",
     "raw": "0.216372442",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 89.9033,
     "max": 89.9033,
     "quality": "reported",
     "raw": "89.90328927",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 303.99,
     "max": 303.99,
     "quality": "reported",
     "raw": "3.0399",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.140946,
     "max": 0.140946,
     "quality": "reported",
     "raw": "0.140946411",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/112",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21130 N5",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 112,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130N5_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-11 131 02:42:38:517 ,Experiment: 5,Test Point: 21130N5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130N5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21130N5_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-11 131 02:42:38:517 ,Experiment: 5,Test Point: 21130N5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21130N5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2196.66,
     "max": 2196.66,
     "quality": "reported",
     "raw": "2196.662035",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.216372,
     "max": 0.216372,
     "quality": "reported",
     "raw": "0.216372442",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.216372,
     "max": 0.216372,
     "quality": "reported",
     "raw": "0.216372442",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 303.99,
     "max": 303.99,
     "quality": "reported",
     "raw": "3.0399",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.140929,
     "max": 0.140929,
     "quality": "reported",
     "raw": "0.140929374",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/113",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21137A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 113,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137A1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 13:35:48:343 ,Experiment: 5,Test Point: 21137A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137A1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 13:35:48:343 ,Experiment: 5,Test Point: 21137A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2636.62,
     "max": 2636.62,
     "quality": "reported",
     "raw": "2636.620386",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 19,
     "max": 19,
     "quality": "reported",
     "raw": "19",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.89,
     "max": 2.89,
     "quality": "reported",
     "raw": "2.89",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "same bottle",
     "quality": "reported",
     "raw": "same bottle",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.3996,
     "max": 0.3996,
     "quality": "reported",
     "raw": "0.3996",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.397259,
     "max": 0.397259,
     "quality": "reported",
     "raw": "0.397258964",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 132.618,
     "max": 132.618,
     "quality": "reported",
     "raw": "132.6178451",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.228094,
     "max": 0.228094,
     "quality": "reported",
     "raw": "0.228094199",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/114",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21137 A2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 114,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137A2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 13:56:37:574 ,Experiment: 5,Test Point: 21137A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137A2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 13:56:37:574 ,Experiment: 5,Test Point: 21137A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2633.58,
     "max": 2633.58,
     "quality": "reported",
     "raw": "2633.57542",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 39,
     "max": 39,
     "quality": "reported",
     "raw": "39",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.397259,
     "max": 0.397259,
     "quality": "reported",
     "raw": "0.397258964",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.394769,
     "max": 0.394769,
     "quality": "reported",
     "raw": "0.394768875",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 234.575,
     "max": 234.575,
     "quality": "reported",
     "raw": "234.5749126",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.227117,
     "max": 0.227117,
     "quality": "reported",
     "raw": "0.22711666",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/115",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21137 A3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 115,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137A3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 14:07:17:051 ,Experiment: 5,Test Point: 21137A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137A3_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 14:07:17:051 ,Experiment: 5,Test Point: 21137A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2630.3,
     "max": 2630.3,
     "quality": "reported",
     "raw": "2630.300519",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 124,
     "max": 124,
     "quality": "reported",
     "raw": "124",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394769,
     "max": 0.394769,
     "quality": "reported",
     "raw": "0.394768875",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.389509,
     "max": 0.389509,
     "quality": "reported",
     "raw": "0.389508666",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 397.824,
     "max": 397.824,
     "quality": "reported",
     "raw": "397.8240746",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.226073,
     "max": 0.226073,
     "quality": "reported",
     "raw": "0.22607348",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/116",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21137 B1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 116,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137B1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 14:26:45:922 ,Experiment: 5,Test Point: 21137B1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137B1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 14:26:45:922 ,Experiment: 5,Test Point: 21137B1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.750000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2486.33,
     "max": 2486.33,
     "quality": "reported",
     "raw": "2486.332454",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 127,
     "max": 127,
     "quality": "reported",
     "raw": "127",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.89,
     "max": 2.89,
     "quality": "reported",
     "raw": "2.89",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Irregular Oscillation",
     "quality": "reported",
     "raw": "Irregular Oscillation",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.389509,
     "max": 0.389509,
     "quality": "reported",
     "raw": "0.389508666",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.371242,
     "max": 0.371242,
     "quality": "reported",
     "raw": "0.371242231",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 179.839,
     "max": 179.839,
     "quality": "reported",
     "raw": "179.839068",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.348306,
     "max": 0.348306,
     "quality": "reported",
     "raw": "0.348306098",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/117",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21137 B2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 117,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137B2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 14:46:09:090 ,Experiment: 5,Test Point: 21137B2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137B2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137B2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 14:46:09:090 ,Experiment: 5,Test Point: 21137B2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137B2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2216.05,
     "max": 2216.05,
     "quality": "reported",
     "raw": "2216.048717",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 147,
     "max": 147,
     "quality": "reported",
     "raw": "147",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.08,
     "max": 0.08,
     "quality": "reported",
     "raw": "0.08",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Irregular Oscillation",
     "quality": "reported",
     "raw": "Irregular Oscillation",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.371242,
     "max": 0.371242,
     "quality": "reported",
     "raw": "0.371242231",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.357499,
     "max": 0.357499,
     "quality": "reported",
     "raw": "0.357498988",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 161.401,
     "max": 161.401,
     "quality": "reported",
     "raw": "161.4007689",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.479721,
     "max": 0.479721,
     "quality": "reported",
     "raw": "0.47972056",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/118",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21137 A4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 118,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137A4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 15:38:19:692 ,Experiment: 5,Test Point: 21137A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137A4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137A4_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 15:38:19:692 ,Experiment: 5,Test Point: 21137A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137A4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2576.15,
     "max": 2576.15,
     "quality": "reported",
     "raw": "2576.152786",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 35,
     "max": 35,
     "quality": "reported",
     "raw": "35",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.25,
     "max": 1.25,
     "quality": "reported",
     "raw": "1.25",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.357499,
     "max": 0.357499,
     "quality": "reported",
     "raw": "0.357498988",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.355684,
     "max": 0.355684,
     "quality": "reported",
     "raw": "0.355683743",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 234.069,
     "max": 234.069,
     "quality": "reported",
     "raw": "234.0686037",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.210029,
     "max": 0.210029,
     "quality": "reported",
     "raw": "0.210028804",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/119",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21137 A5",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 119,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137A5_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 15:57:36:672 ,Experiment: 5,Test Point: 21137A5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137A5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137A5_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 15:57:36:672 ,Experiment: 5,Test Point: 21137A5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137A5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2573.23,
     "max": 2573.23,
     "quality": "reported",
     "raw": "2573.232287",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 44,
     "max": 44,
     "quality": "reported",
     "raw": "44",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.1,
     "max": 1.1,
     "quality": "reported",
     "raw": "1.1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.355684,
     "max": 0.355684,
     "quality": "reported",
     "raw": "0.355683743",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.353678,
     "max": 0.353678,
     "quality": "reported",
     "raw": "0.353678232",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 283.212,
     "max": 283.212,
     "quality": "reported",
     "raw": "283.2118442",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.209226,
     "max": 0.209226,
     "quality": "reported",
     "raw": "0.209226104",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/120",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21137 A6",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 120,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137A6_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 16:09:32:246 ,Experiment: 5,Test Point: 21137A6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137A6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137A6_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 16:09:32:246 ,Experiment: 5,Test Point: 21137A6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137A6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2569.97,
     "max": 2569.97,
     "quality": "reported",
     "raw": "2569.970517",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 22,
     "max": 22,
     "quality": "reported",
     "raw": "22",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.4,
     "max": 1.4,
     "quality": "reported",
     "raw": "1.4",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.353678,
     "max": 0.353678,
     "quality": "reported",
     "raw": "0.353678232",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.352403,
     "max": 0.352403,
     "quality": "reported",
     "raw": "0.352403076",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 172.125,
     "max": 172.125,
     "quality": "reported",
     "raw": "172.1251976",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.208337,
     "max": 0.208337,
     "quality": "reported",
     "raw": "0.208336909",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/121",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21137 A7",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 121,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137A7_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 16:28:41:315 ,Experiment: 5,Test Point: 21137A7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137A7_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137A7_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 16:28:41:315 ,Experiment: 5,Test Point: 21137A7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137A7_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2567.88,
     "max": 2567.88,
     "quality": "reported",
     "raw": "2567.877057",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 33,
     "max": 33,
     "quality": "reported",
     "raw": "33",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.2,
     "max": 1.2,
     "quality": "reported",
     "raw": "1.2",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.352403,
     "max": 0.352403,
     "quality": "reported",
     "raw": "0.352403076",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.350765,
     "max": 0.350765,
     "quality": "reported",
     "raw": "0.350765374",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 229.598,
     "max": 229.598,
     "quality": "reported",
     "raw": "229.5978338",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.20777,
     "max": 0.20777,
     "quality": "reported",
     "raw": "0.207770243",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/122",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21137 D1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 122,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137D1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 17:30:32:801 ,Experiment: 5,Test Point: 21137D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137D1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137D1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 17:30:32:801 ,Experiment: 5,Test Point: 21137D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137D1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2168.2,
     "max": 2168.2,
     "quality": "reported",
     "raw": "2168.201271",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.89,
     "max": 2.89,
     "quality": "reported",
     "raw": "2.89",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.209134,
     "max": 0.209134,
     "quality": "reported",
     "raw": "0.209133851",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 65.1967,
     "max": 65.1967,
     "quality": "reported",
     "raw": "65.19673179",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.137453,
     "max": 0.137453,
     "quality": "reported",
     "raw": "0.137453187",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/123",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21137 D2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 123,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137D2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 17:46:12:370 ,Experiment: 5,Test Point: 21137D2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137D2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137D2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 17:46:12:370 ,Experiment: 5,Test Point: 21137D2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137D2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2164.23,
     "max": 2164.23,
     "quality": "reported",
     "raw": "2164.225786",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 11,
     "max": 11,
     "quality": "reported",
     "raw": "11",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.209134,
     "max": 0.209134,
     "quality": "reported",
     "raw": "0.209133851",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.208928,
     "max": 0.208928,
     "quality": "reported",
     "raw": "0.208927834",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 134.241,
     "max": 134.241,
     "quality": "reported",
     "raw": "134.2412688",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.136978,
     "max": 0.136978,
     "quality": "reported",
     "raw": "0.136978052",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/124",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21137 C1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 124,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137C1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 18:11:20:521 ,Experiment: 5,Test Point: 21137C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21137C1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-05-17 137 18:11:20:521 ,Experiment: 5,Test Point: 21137C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 22,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21137C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2033.6,
     "max": 2033.6,
     "quality": "reported",
     "raw": "2033.600696",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "propane",
     "quality": "reported",
     "raw": "30% propane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.208928,
     "max": 0.208928,
     "quality": "reported",
     "raw": "0.208927834",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.20876,
     "max": 0.20876,
     "quality": "reported",
     "raw": "0.208760367",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 101.361,
     "max": 101.361,
     "quality": "reported",
     "raw": "101.3609727",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.227102,
     "max": 0.227102,
     "quality": "reported",
     "raw": "0.22710207",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/125",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21153A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 125,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153A1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 15:58:54:060 ,Experiment: 5,Test Point: 21153A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153A1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 15:58:54:060 ,Experiment: 5,Test Point: 21153A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2573.17,
     "max": 2573.17,
     "quality": "reported",
     "raw": "2573.174924",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 59,
     "max": 59,
     "quality": "reported",
     "raw": "59",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.36,
     "max": 2.36,
     "quality": "reported",
     "raw": "2.36",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "1 bottle, 2 days, 30% C2H6, timer reset",
     "quality": "reported",
     "raw": "1 bottle, 2 days, 30% C2H6, timer reset",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.3887,
     "max": 0.3887,
     "quality": "reported",
     "raw": "0.3887",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.3759,
     "max": 0.3759,
     "quality": "reported",
     "raw": "0.375900202",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 198.883,
     "max": 198.883,
     "quality": "reported",
     "raw": "198.8830252",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.263904,
     "max": 0.263904,
     "quality": "reported",
     "raw": "0.263903693",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/126",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21153 A2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 126,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153A2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 16:14:01:734 ,Experiment: 5,Test Point: 21153A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153A2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 16:14:01:734 ,Experiment: 5,Test Point: 21153A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2555.2,
     "max": 2555.2,
     "quality": "reported",
     "raw": "2555.198965",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 88,
     "max": 88,
     "quality": "reported",
     "raw": "88",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.3759,
     "max": 0.3759,
     "quality": "reported",
     "raw": "0.375900202",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.363879,
     "max": 0.363879,
     "quality": "reported",
     "raw": "0.363879118",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 269.848,
     "max": 269.848,
     "quality": "reported",
     "raw": "269.8475867",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.257781,
     "max": 0.257781,
     "quality": "reported",
     "raw": "0.257781029",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/127",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21153 A3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 127,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153A3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 16:38:49:784 ,Experiment: 5,Test Point: 21153A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153A3_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 16:38:49:784 ,Experiment: 5,Test Point: 21153A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2537.14,
     "max": 2537.14,
     "quality": "reported",
     "raw": "2537.138924",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 258,
     "max": 258,
     "quality": "reported",
     "raw": "258",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.363879,
     "max": 0.363879,
     "quality": "reported",
     "raw": "0.363879118",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.340808,
     "max": 0.340808,
     "quality": "reported",
     "raw": "0.34080788",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 374.054,
     "max": 374.054,
     "quality": "reported",
     "raw": "374.0544372",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.251918,
     "max": 0.251918,
     "quality": "reported",
     "raw": "0.251917603",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/128",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21153 F1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 128,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153F1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 17:05:45:033 ,Experiment: 5,Test Point: 21153F1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153F1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 17:05:45:033 ,Experiment: 5,Test Point: 21153F1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2498.76,
     "max": 2498.76,
     "quality": "reported",
     "raw": "2498.76161",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 44,
     "max": 44,
     "quality": "reported",
     "raw": "44",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.340808,
     "max": 0.340808,
     "quality": "reported",
     "raw": "0.34080788",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.334934,
     "max": 0.334934,
     "quality": "reported",
     "raw": "0.334933586",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 204.944,
     "max": 204.944,
     "quality": "reported",
     "raw": "204.9444171",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.240345,
     "max": 0.240345,
     "quality": "reported",
     "raw": "0.240345135",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/129",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21153 A4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 129,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153A4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 17:41:28:076 ,Experiment: 5,Test Point: 21153A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153A4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153A4_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 17:41:28:076 ,Experiment: 5,Test Point: 21153A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153A4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2488.1,
     "max": 2488.1,
     "quality": "reported",
     "raw": "2488.103107",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 56,
     "max": 56,
     "quality": "reported",
     "raw": "56",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.334934,
     "max": 0.334934,
     "quality": "reported",
     "raw": "0.334933586",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.332446,
     "max": 0.332446,
     "quality": "reported",
     "raw": "0.332446428",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 508.715,
     "max": 508.715,
     "quality": "reported",
     "raw": "508.715304",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.237329,
     "max": 0.237329,
     "quality": "reported",
     "raw": "0.237329338",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/130",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21153 A5",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 130,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153A5_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 17:52:19:256 ,Experiment: 5,Test Point: 21153A5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153A5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153A5_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 17:52:19:256 ,Experiment: 5,Test Point: 21153A5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153A5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2483.47,
     "max": 2483.47,
     "quality": "reported",
     "raw": "2483.470764",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 274,
     "max": 274,
     "quality": "reported",
     "raw": "274",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.332446,
     "max": 0.332446,
     "quality": "reported",
     "raw": "0.332446428",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.314456,
     "max": 0.314456,
     "quality": "reported",
     "raw": "0.314456131",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 421.284,
     "max": 421.284,
     "quality": "reported",
     "raw": "421.2840689",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.236044,
     "max": 0.236044,
     "quality": "reported",
     "raw": "0.23604377",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/131",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21153 C1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 131,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153C1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 19:47:36:834 ,Experiment: 5,Test Point: 21153C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153C1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 19:47:36:834 ,Experiment: 5,Test Point: 21153C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2586.15,
     "max": 2586.15,
     "quality": "reported",
     "raw": "2586.152396",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 34,
     "max": 34,
     "quality": "reported",
     "raw": "34",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.36,
     "max": 2.36,
     "quality": "reported",
     "raw": "2.36",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.3985,
     "max": 0.3985,
     "quality": "reported",
     "raw": "0.3985",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.396626,
     "max": 0.396626,
     "quality": "reported",
     "raw": "0.396626309",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 172.804,
     "max": 172.804,
     "quality": "reported",
     "raw": "172.8039716",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.26851,
     "max": 0.26851,
     "quality": "reported",
     "raw": "0.268509614",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/132",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21153 C2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 132,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153C2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 20:11:08:282 ,Experiment: 5,Test Point: 21153C2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153C2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153C2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 20:11:08:282 ,Experiment: 5,Test Point: 21153C2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153C2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2583.72,
     "max": 2583.72,
     "quality": "reported",
     "raw": "2583.720616",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 51,
     "max": 51,
     "quality": "reported",
     "raw": "51",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.396626,
     "max": 0.396626,
     "quality": "reported",
     "raw": "0.396626309",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.394842,
     "max": 0.394842,
     "quality": "reported",
     "raw": "0.394842385",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 238.793,
     "max": 238.793,
     "quality": "reported",
     "raw": "238.7934911",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.267634,
     "max": 0.267634,
     "quality": "reported",
     "raw": "0.267634393",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/133",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21153 C3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 133,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153C3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 20:31:49:827 ,Experiment: 5,Test Point: 21153C3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153C3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153C3_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 20:31:49:827 ,Experiment: 5,Test Point: 21153C3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153C3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2581.38,
     "max": 2581.38,
     "quality": "reported",
     "raw": "2581.38403",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 123,
     "max": 123,
     "quality": "reported",
     "raw": "123",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394842,
     "max": 0.394842,
     "quality": "reported",
     "raw": "0.394842385",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.39198,
     "max": 0.39198,
     "quality": "reported",
     "raw": "0.391980391",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 357.398,
     "max": 357.398,
     "quality": "reported",
     "raw": "357.3984459",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.266799,
     "max": 0.266799,
     "quality": "reported",
     "raw": "0.266798742",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/134",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21153 G1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 134,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153G1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 21:08:41:542 ,Experiment: 5,Test Point: 21153G1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153G1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153G1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 21:08:41:542 ,Experiment: 5,Test Point: 21153G1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153G1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2577.59,
     "max": 2577.59,
     "quality": "reported",
     "raw": "2577.591097",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 131,
     "max": 131,
     "quality": "reported",
     "raw": "131",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.39198,
     "max": 0.39198,
     "quality": "reported",
     "raw": "0.391980391",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.388939,
     "max": 0.388939,
     "quality": "reported",
     "raw": "0.388939354",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 359.033,
     "max": 359.033,
     "quality": "reported",
     "raw": "359.0328722",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.265453,
     "max": 0.265453,
     "quality": "reported",
     "raw": "0.265453253",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/135",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21153 C4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 135,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153C4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 21:27:13:900 ,Experiment: 5,Test Point: 21153C4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153C4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153C4_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 21:27:13:900 ,Experiment: 5,Test Point: 21153C4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153C4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2573.5,
     "max": 2573.5,
     "quality": "reported",
     "raw": "2573.499679",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 276,
     "max": 276,
     "quality": "reported",
     "raw": "276",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.388939,
     "max": 0.388939,
     "quality": "reported",
     "raw": "0.388939354",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.384152,
     "max": 0.384152,
     "quality": "reported",
     "raw": "0.384151721",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 436.267,
     "max": 436.267,
     "quality": "reported",
     "raw": "436.2667166",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.264017,
     "max": 0.264017,
     "quality": "reported",
     "raw": "0.264017024",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/136",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21153 C5",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 136,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153C5_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 21:46:57:549 ,Experiment: 5,Test Point: 21153C5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153C5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153C5_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 21:46:57:549 ,Experiment: 5,Test Point: 21153C5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153C5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2566.93,
     "max": 2566.93,
     "quality": "reported",
     "raw": "2566.926361",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 49,
     "max": 49,
     "quality": "reported",
     "raw": "49",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.384152,
     "max": 0.384152,
     "quality": "reported",
     "raw": "0.384151721",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.383585,
     "max": 0.383585,
     "quality": "reported",
     "raw": "0.383585316",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 511.722,
     "max": 511.722,
     "quality": "reported",
     "raw": "511.7221784",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.261742,
     "max": 0.261742,
     "quality": "reported",
     "raw": "0.261742086",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/137",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21153 C6",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 137,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153C6_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 22:02:35:019 ,Experiment: 5,Test Point: 21153C6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153C6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153C6_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 22:02:35:019 ,Experiment: 5,Test Point: 21153C6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153C6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2566.14,
     "max": 2566.14,
     "quality": "reported",
     "raw": "2566.13774",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 44,
     "max": 44,
     "quality": "reported",
     "raw": "44",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.383585,
     "max": 0.383585,
     "quality": "reported",
     "raw": "0.383585316",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.382061,
     "max": 0.382061,
     "quality": "reported",
     "raw": "0.382061285",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 223.207,
     "max": 223.207,
     "quality": "reported",
     "raw": "223.2070887",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.261472,
     "max": 0.261472,
     "quality": "reported",
     "raw": "0.261471822",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/138",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21153 C7",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 138,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153C7_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 22:15:28:586 ,Experiment: 5,Test Point: 21153C7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153C7_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21153C7_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-02 153 22:15:28:586 ,Experiment: 5,Test Point: 21153C7,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21153C7_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2564,
     "max": 2564,
     "quality": "reported",
     "raw": "2564.00403",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 61,
     "max": 61,
     "quality": "reported",
     "raw": "61",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.382061,
     "max": 0.382061,
     "quality": "reported",
     "raw": "0.382061285",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.380654,
     "max": 0.380654,
     "quality": "reported",
     "raw": "0.38065424",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 334.568,
     "max": 334.568,
     "quality": "reported",
     "raw": "334.5683537",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.260743,
     "max": 0.260743,
     "quality": "reported",
     "raw": "0.260743429",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/139",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21162A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 139,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162A1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 15:24:10:289 ,Experiment: 5,Test Point: 21162A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162A1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 15:24:10:289 ,Experiment: 5,Test Point: 21162A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2587.7,
     "max": 2587.7,
     "quality": "reported",
     "raw": "2587.697951",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 43,
     "max": 43,
     "quality": "reported",
     "raw": "43",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.36,
     "max": 2.36,
     "quality": "reported",
     "raw": "2.36",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "same bottle, will get a timer reset",
     "quality": "reported",
     "raw": "same bottle, will get a timer reset",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.3997,
     "max": 0.3997,
     "quality": "reported",
     "raw": "0.3997",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.394967,
     "max": 0.394967,
     "quality": "reported",
     "raw": "0.394966671",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 182.037,
     "max": 182.037,
     "quality": "reported",
     "raw": "182.037161",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.269069,
     "max": 0.269069,
     "quality": "reported",
     "raw": "0.269068818",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/140",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21162 A2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 140,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162A2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 15:51:01:735 ,Experiment: 5,Test Point: 21162A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162A2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 15:51:01:735 ,Experiment: 5,Test Point: 21162A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2581.55,
     "max": 2581.55,
     "quality": "reported",
     "raw": "2581.5475",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 71,
     "max": 71,
     "quality": "reported",
     "raw": "71",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394967,
     "max": 0.394967,
     "quality": "reported",
     "raw": "0.394966671",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.390018,
     "max": 0.390018,
     "quality": "reported",
     "raw": "0.390017987",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 261.682,
     "max": 261.682,
     "quality": "reported",
     "raw": "261.6815899",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.266857,
     "max": 0.266857,
     "quality": "reported",
     "raw": "0.266857037",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/141",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21162 A3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 141,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162A3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 16:15:51:291 ,Experiment: 5,Test Point: 21162A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162A3_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 16:15:51:291 ,Experiment: 5,Test Point: 21162A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2574.96,
     "max": 2574.96,
     "quality": "reported",
     "raw": "2574.958198",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 232,
     "max": 232,
     "quality": "reported",
     "raw": "232",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.390018,
     "max": 0.390018,
     "quality": "reported",
     "raw": "0.390017987",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.379326,
     "max": 0.379326,
     "quality": "reported",
     "raw": "0.37932621",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 374.972,
     "max": 374.972,
     "quality": "reported",
     "raw": "374.9717854",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.264527,
     "max": 0.264527,
     "quality": "reported",
     "raw": "0.264527221",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/142",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21162 B1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 142,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162B1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 16:39:37:351 ,Experiment: 5,Test Point: 21162B1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162B1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 16:39:37:351 ,Experiment: 5,Test Point: 21162B1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2560.13,
     "max": 2560.13,
     "quality": "reported",
     "raw": "2560.131167",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 158,
     "max": 158,
     "quality": "reported",
     "raw": "158",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.379326,
     "max": 0.379326,
     "quality": "reported",
     "raw": "0.37932621",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.372086,
     "max": 0.372086,
     "quality": "reported",
     "raw": "0.372085537",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 360.809,
     "max": 360.809,
     "quality": "reported",
     "raw": "360.8093385",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.259432,
     "max": 0.259432,
     "quality": "reported",
     "raw": "0.25943187",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/143",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21162 A4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 143,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162A4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 16:59:45:105 ,Experiment: 5,Test Point: 21162A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162A4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162A4_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 16:59:45:105 ,Experiment: 5,Test Point: 21162A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162A4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2549.6,
     "max": 2549.6,
     "quality": "reported",
     "raw": "2549.597946",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 304,
     "max": 304,
     "quality": "reported",
     "raw": "304",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.372086,
     "max": 0.372086,
     "quality": "reported",
     "raw": "0.372085537",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.360352,
     "max": 0.360352,
     "quality": "reported",
     "raw": "0.360351946",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 405.329,
     "max": 405.329,
     "quality": "reported",
     "raw": "405.3290232",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.255932,
     "max": 0.255932,
     "quality": "reported",
     "raw": "0.255932419",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/144",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21162 C1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 144,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162C1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 18:12:26:936 ,Experiment: 5,Test Point: 21162C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162C1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 18:12:26:936 ,Experiment: 5,Test Point: 21162C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2121.08,
     "max": 2121.08,
     "quality": "reported",
     "raw": "2121.080305",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 19,
     "max": 19,
     "quality": "reported",
     "raw": "19",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.20962,
     "max": 0.20962,
     "quality": "reported",
     "raw": "0.209619681",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 162.208,
     "max": 162.208,
     "quality": "reported",
     "raw": "162.2075945",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.165606,
     "max": 0.165606,
     "quality": "reported",
     "raw": "0.165606435",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/145",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21162 C2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 145,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162C2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 18:32:32:651 ,Experiment: 5,Test Point: 21162C2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162C2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162C2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 18:32:32:651 ,Experiment: 5,Test Point: 21162C2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162C2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2119.38,
     "max": 2119.38,
     "quality": "reported",
     "raw": "2119.380751",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 11,
     "max": 11,
     "quality": "reported",
     "raw": "11",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.20962,
     "max": 0.20962,
     "quality": "reported",
     "raw": "0.209619681",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.20929,
     "max": 0.20929,
     "quality": "reported",
     "raw": "0.209289501",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 94.7458,
     "max": 94.7458,
     "quality": "reported",
     "raw": "94.74583001",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.165363,
     "max": 0.165363,
     "quality": "reported",
     "raw": "0.16536336",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/146",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21162 C3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 146,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162C3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 18:43:26:923 ,Experiment: 5,Test Point: 21162C3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162C3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162C3_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 18:43:26:923 ,Experiment: 5,Test Point: 21162C3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162C3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2117.9,
     "max": 2117.9,
     "quality": "reported",
     "raw": "2117.901476",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.20929,
     "max": 0.20929,
     "quality": "reported",
     "raw": "0.209289501",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.208929,
     "max": 0.208929,
     "quality": "reported",
     "raw": "0.20892942",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 73.1332,
     "max": 73.1332,
     "quality": "reported",
     "raw": "73.13315747",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.165152,
     "max": 0.165152,
     "quality": "reported",
     "raw": "0.165152194",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/147",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21162 C4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 147,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162C4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 19:04:30:194 ,Experiment: 5,Test Point: 21162C4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162C4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162C4_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 19:04:30:194 ,Experiment: 5,Test Point: 21162C4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162C4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2116.28,
     "max": 2116.28,
     "quality": "reported",
     "raw": "2116.284224",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.208929,
     "max": 0.208929,
     "quality": "reported",
     "raw": "0.20892942",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.20839,
     "max": 0.20839,
     "quality": "reported",
     "raw": "0.208389559",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 65.0751,
     "max": 65.0751,
     "quality": "reported",
     "raw": "65.07509445",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.164922,
     "max": 0.164922,
     "quality": "reported",
     "raw": "0.164921762",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/148",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21162 C5",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 148,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162C5_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 19:27:52:143 ,Experiment: 5,Test Point: 21162C5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162C5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162C5_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 19:27:52:143 ,Experiment: 5,Test Point: 21162C5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162C5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2113.85,
     "max": 2113.85,
     "quality": "reported",
     "raw": "2113.851649",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2.36,
     "max": 2.36,
     "quality": "reported",
     "raw": "2.36",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.20839,
     "max": 0.20839,
     "quality": "reported",
     "raw": "0.208389559",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.207541,
     "max": 0.207541,
     "quality": "reported",
     "raw": "0.207540819",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 63.1684,
     "max": 63.1684,
     "quality": "reported",
     "raw": "63.16842314",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.164576,
     "max": 0.164576,
     "quality": "reported",
     "raw": "0.164575998",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/149",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21162 D1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 149,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162D1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 19:54:47:803 ,Experiment: 5,Test Point: 21162D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162D1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162D1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 19:54:47:803 ,Experiment: 5,Test Point: 21162D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162D1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2110.01,
     "max": 2110.01,
     "quality": "reported",
     "raw": "2110.008148",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 16,
     "max": 16,
     "quality": "reported",
     "raw": "16",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.207541,
     "max": 0.207541,
     "quality": "reported",
     "raw": "0.207540819",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.207221,
     "max": 0.207221,
     "quality": "reported",
     "raw": "0.207221235",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 143.9,
     "max": 143.9,
     "quality": "reported",
     "raw": "143.9003679",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.164032,
     "max": 0.164032,
     "quality": "reported",
     "raw": "0.164031725",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/150",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21162 F1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 150,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162F1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 20:17:05:762 ,Experiment: 5,Test Point: 21162F1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162F1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 20:17:05:762 ,Experiment: 5,Test Point: 21162F1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2108.55,
     "max": 2108.55,
     "quality": "reported",
     "raw": "2108.554829",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "burn time (sec)"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.207221,
     "max": 0.207221,
     "quality": "reported",
     "raw": "0.207221235",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.207221,
     "max": 0.207221,
     "quality": "reported",
     "raw": "0.207221235",
     "column": "XO2 after test"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.163827,
     "max": 0.163827,
     "quality": "reported",
     "raw": "0.163826567",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/151",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21162 F2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 151,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162F2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 20:30:18:532 ,Experiment: 5,Test Point: 21162F2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162F2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21162F2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-11 162 20:30:18:532 ,Experiment: 5,Test Point: 21162F2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 25,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21162F2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2108.55,
     "max": 2108.55,
     "quality": "reported",
     "raw": "2108.554829",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "ethane",
     "quality": "reported",
     "raw": "30% ethane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.207221,
     "max": 0.207221,
     "quality": "reported",
     "raw": "0.207221235",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.206622,
     "max": 0.206622,
     "quality": "reported",
     "raw": "0.206622334",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 67.1064,
     "max": 67.1064,
     "quality": "reported",
     "raw": "67.10637802",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.163827,
     "max": 0.163827,
     "quality": "reported",
     "raw": "0.163826567",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/152",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21174 A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 152,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174A1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 13:52:55:799 ,Experiment: 5,Test Point: 21174A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21174A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174A1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 13:52:55:799 ,Experiment: 5,Test Point: 21174A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21174A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2644.61,
     "max": 2644.61,
     "quality": "reported",
     "raw": "2644.607139",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 21,
     "max": 21,
     "quality": "reported",
     "raw": "21",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 3.215,
     "max": 3.215,
     "quality": "reported",
     "raw": "3.215",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "1 bottle 1 day, 30% butane, 3 hour gap if we want a timer reset?",
     "quality": "reported",
     "raw": "1 bottle 1 day, 30% butane, 3 hour gap if we want a timer reset?",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.3886,
     "max": 0.3886,
     "quality": "reported",
     "raw": "0.3886",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.383172,
     "max": 0.383172,
     "quality": "reported",
     "raw": "0.38317216",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 132,
     "max": 132,
     "quality": "reported",
     "raw": "132",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.199826,
     "max": 0.199826,
     "quality": "reported",
     "raw": "0.199825635",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/153",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21174 A2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 153,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174A2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 14:11:50:155 ,Experiment: 5,Test Point: 21174A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21174A2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174A2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 14:11:50:155 ,Experiment: 5,Test Point: 21174A2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21174A2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2637.12,
     "max": 2637.12,
     "quality": "reported",
     "raw": "2637.1216",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 29,
     "max": 29,
     "quality": "reported",
     "raw": "29",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.383172,
     "max": 0.383172,
     "quality": "reported",
     "raw": "0.38317216",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.378522,
     "max": 0.378522,
     "quality": "reported",
     "raw": "0.378521822",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 175,
     "max": 175,
     "quality": "reported",
     "raw": "175",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.197702,
     "max": 0.197702,
     "quality": "reported",
     "raw": "0.197702101",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/154",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21174 A3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 154,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174A3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 14:38:01:112 ,Experiment: 5,Test Point: 21174A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21174A3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174A3_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 14:38:01:112 ,Experiment: 5,Test Point: 21174A3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21174A3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2630.56,
     "max": 2630.56,
     "quality": "reported",
     "raw": "2630.558001",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 54,
     "max": 54,
     "quality": "reported",
     "raw": "54",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.378522,
     "max": 0.378522,
     "quality": "reported",
     "raw": "0.378521822",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.372052,
     "max": 0.372052,
     "quality": "reported",
     "raw": "0.372051768",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 276,
     "max": 276,
     "quality": "reported",
     "raw": "276",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.195871,
     "max": 0.195871,
     "quality": "reported",
     "raw": "0.195871271",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/155",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21174 A4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 155,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174A4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 14:52:36:280 ,Experiment: 5,Test Point: 21174A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21174A4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174A4_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 14:52:36:280 ,Experiment: 5,Test Point: 21174A4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21174A4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2621.18,
     "max": 2621.18,
     "quality": "reported",
     "raw": "2621.181096",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 210,
     "max": 210,
     "quality": "reported",
     "raw": "210",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.372052,
     "max": 0.372052,
     "quality": "reported",
     "raw": "0.372051768",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.35544,
     "max": 0.35544,
     "quality": "reported",
     "raw": "0.355439854",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 421,
     "max": 421,
     "quality": "reported",
     "raw": "421",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.193306,
     "max": 0.193306,
     "quality": "reported",
     "raw": "0.193306217",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/156",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21174 B1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 156,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174B1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 15:31:56:913 ,Experiment: 5,Test Point: 21174B1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21174B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174B1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 15:31:56:913 ,Experiment: 5,Test Point: 21174B1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21174B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2595.66,
     "max": 2595.66,
     "quality": "reported",
     "raw": "2595.657867",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 109,
     "max": 109,
     "quality": "reported",
     "raw": "109",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.35544,
     "max": 0.35544,
     "quality": "reported",
     "raw": "0.355439854",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.346861,
     "max": 0.346861,
     "quality": "reported",
     "raw": "0.346860985",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 388,
     "max": 388,
     "quality": "reported",
     "raw": "388",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 50.665,
     "max": 50.665,
     "quality": "reported",
     "raw": "0.50665",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.186624,
     "max": 0.186624,
     "quality": "reported",
     "raw": "0.186623862",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/157",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21174 C1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 157,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 4.5,
     "max": 4.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 4.500000",
     "column": "row 0, column PMT 1 Gain: 4.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174C1_data.csv, row 0, column PMT 1 Gain: 4.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 17:19:31:214 ,Experiment: 5,Test Point: 21174C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 4.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-159_Raw Data_21174C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.000000",
     "column": "row 0, column PMT 3 Gain: 5.000000",
     "note": "From NASA's file PSI-159_Raw Data_21174C1_data.csv, row 0, column PMT 3 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 17:19:31:214 ,Experiment: 5,Test Point: 21174C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 4.500000,PMT 2 Gain: 5.000000,PMT 3 Gain: 5.000000",
     "evidence_source": "file:PSI-159_Raw Data_21174C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2657.81,
     "max": 2657.81,
     "quality": "reported",
     "raw": "2657.806132",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 30,
     "max": 30,
     "quality": "reported",
     "raw": "30",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 3.215,
     "max": 3.215,
     "quality": "reported",
     "raw": "3.215",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Irregular Oscillation",
     "quality": "reported",
     "raw": "Irregular Oscillation",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.3985,
     "max": 0.3985,
     "quality": "reported",
     "raw": "0.3985",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.396546,
     "max": 0.396546,
     "quality": "reported",
     "raw": "0.396546482",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 156,
     "max": 156,
     "quality": "reported",
     "raw": "156",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.203662,
     "max": 0.203662,
     "quality": "reported",
     "raw": "0.203662106",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/158",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21174 C2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 158,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.000000",
     "column": "row 0, column PMT 1 Gain: 5.000000",
     "note": "From NASA's file PSI-159_Raw Data_21174C2_data.csv, row 0, column PMT 1 Gain: 5.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 17:42:05:571 ,Experiment: 5,Test Point: 21174C2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21174C2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174C2_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 17:42:05:571 ,Experiment: 5,Test Point: 21174C2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.000000,PMT 2 Gain: 5.500000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21174C2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2655.25,
     "max": 2655.25,
     "quality": "reported",
     "raw": "2655.246017",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 29,
     "max": 29,
     "quality": "reported",
     "raw": "29",
     "column": "burn time (sec)"
    },
    "cool_flame": {
     "bool": false,
     "quality": "reported",
     "raw": "no, PCI-hot",
     "column": "Cool flame?"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.396546,
     "max": 0.396546,
     "quality": "reported",
     "raw": "0.396546482",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.395373,
     "max": 0.395373,
     "quality": "reported",
     "raw": "0.39537253",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 190,
     "max": 190,
     "quality": "reported",
     "raw": "190",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.202909,
     "max": 0.202909,
     "quality": "reported",
     "raw": "0.202908798",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/159",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21174 C3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 159,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174C3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 18:07:13:341 ,Experiment: 5,Test Point: 21174C3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21174C3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21174C3_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 18:07:13:341 ,Experiment: 5,Test Point: 21174C3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21174C3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2653.7,
     "max": 2653.7,
     "quality": "reported",
     "raw": "2653.697276",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 35,
     "max": 35,
     "quality": "reported",
     "raw": "35",
     "column": "burn time (sec)"
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "yes, PCI-D",
     "column": "Cool flame?"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Cool flame!",
     "quality": "reported",
     "raw": "Cool flame!",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.395373,
     "max": 0.395373,
     "quality": "reported",
     "raw": "0.39537253",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.394311,
     "max": 0.394311,
     "quality": "reported",
     "raw": "0.394310549",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 246,
     "max": 246,
     "quality": "reported",
     "raw": "246",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.202455,
     "max": 0.202455,
     "quality": "reported",
     "raw": "0.202455226",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/160",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21174 C4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 160,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174C4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 18:23:06:389 ,Experiment: 5,Test Point: 21174C4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21174C4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21174C4_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 18:23:06:389 ,Experiment: 5,Test Point: 21174C4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21174C4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2652.29,
     "max": 2652.29,
     "quality": "reported",
     "raw": "2652.289527",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 90,
     "max": 90,
     "quality": "reported",
     "raw": "90",
     "column": "burn time (sec)"
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "yes, PCI-B",
     "column": "Cool flame?"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Cool flame!",
     "quality": "reported",
     "raw": "Cool flame!",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394311,
     "max": 0.394311,
     "quality": "reported",
     "raw": "0.394310549",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.392492,
     "max": 0.392492,
     "quality": "reported",
     "raw": "0.392491915",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 399,
     "max": 399,
     "quality": "reported",
     "raw": "399",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.202044,
     "max": 0.202044,
     "quality": "reported",
     "raw": "0.202044348",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/161",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21174 D1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 161,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174D1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 18:37:49:168 ,Experiment: 5,Test Point: 21174D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21174D1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 5.500000",
     "column": "row 0, column PMT 3 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174D1_data.csv, row 0, column PMT 3 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 18:37:49:168 ,Experiment: 5,Test Point: 21174D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 5.500000",
     "evidence_source": "file:PSI-159_Raw Data_21174D1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2649.86,
     "max": 2649.86,
     "quality": "reported",
     "raw": "2649.863721",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 83,
     "max": 83,
     "quality": "reported",
     "raw": "83",
     "column": "burn time (sec)"
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "yes, PCI-C",
     "column": "Cool flame?"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Cool flame!",
     "quality": "reported",
     "raw": "Cool flame!",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.392492,
     "max": 0.392492,
     "quality": "reported",
     "raw": "0.392491915",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.390816,
     "max": 0.390816,
     "quality": "reported",
     "raw": "0.390816348",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 393,
     "max": 393,
     "quality": "reported",
     "raw": "393",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.201339,
     "max": 0.201339,
     "quality": "reported",
     "raw": "0.201339463",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/162",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21174 F1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 162,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174F1_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 19:36:54:068 ,Experiment: 5,Test Point: 21174F1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21174F1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21174F1_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 19:36:54:068 ,Experiment: 5,Test Point: 21174F1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21174F1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2647.61,
     "max": 2647.61,
     "quality": "reported",
     "raw": "2647.611673",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 40,
     "max": 40,
     "quality": "reported",
     "raw": "40",
     "column": "burn time (sec)"
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "yes, PCI-E",
     "column": "Cool flame?"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Cool flame!",
     "quality": "reported",
     "raw": "Cool flame!",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.390816,
     "max": 0.390816,
     "quality": "reported",
     "raw": "0.390816348",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.389606,
     "max": 0.389606,
     "quality": "reported",
     "raw": "0.389605939",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 258,
     "max": 258,
     "quality": "reported",
     "raw": "258",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.200689,
     "max": 0.200689,
     "quality": "reported",
     "raw": "0.200688619",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/163",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21174 C5",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 163,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21174C5_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 19:54:15:638 ,Experiment: 5,Test Point: 21174C5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21174C5_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6.5,
     "max": 6.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.500000",
     "column": "row 0, column PMT 3 Gain: 6.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174C5_data.csv, row 0, column PMT 3 Gain: 6.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 19:54:15:638 ,Experiment: 5,Test Point: 21174C5,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21174C5_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2645.97,
     "max": 2645.97,
     "quality": "reported",
     "raw": "2645.97447",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 34,
     "max": 34,
     "quality": "reported",
     "raw": "34",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Hit the burner temp limit, terminated.",
     "quality": "reported",
     "raw": "Hit the burner temp limit, terminated.",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.389606,
     "max": 0.389606,
     "quality": "reported",
     "raw": "0.389605939",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.389263,
     "max": 0.389263,
     "quality": "reported",
     "raw": "0.389263058",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 518,
     "max": 518,
     "quality": "reported",
     "raw": "518",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.200218,
     "max": 0.200218,
     "quality": "reported",
     "raw": "0.200217615",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/164",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21174 C6",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 164,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21174C6_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 20:07:51:287 ,Experiment: 5,Test Point: 21174C6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21174C6_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6.5,
     "max": 6.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.500000",
     "column": "row 0, column PMT 3 Gain: 6.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174C6_data.csv, row 0, column PMT 3 Gain: 6.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 20:07:51:287 ,Experiment: 5,Test Point: 21174C6,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21174C6_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2645.51,
     "max": 2645.51,
     "quality": "reported",
     "raw": "2645.509092",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 251,
     "max": 251,
     "quality": "reported",
     "raw": "251",
     "column": "burn time (sec)"
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "yes, PCI-A",
     "column": "Cool flame?"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Cool flame!",
     "quality": "reported",
     "raw": "Cool flame!",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.389263,
     "max": 0.389263,
     "quality": "reported",
     "raw": "0.389263058",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.385474,
     "max": 0.385474,
     "quality": "reported",
     "raw": "0.385474447",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 488,
     "max": 488,
     "quality": "reported",
     "raw": "488",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.200084,
     "max": 0.200084,
     "quality": "reported",
     "raw": "0.200084061",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/165",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21174 F2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 165,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174F2_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 20:46:22:534 ,Experiment: 5,Test Point: 21174F2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21174F2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21174F2_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 20:46:22:534 ,Experiment: 5,Test Point: 21174F2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21174F2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2640.32,
     "max": 2640.32,
     "quality": "reported",
     "raw": "2640.3192",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 24,
     "max": 24,
     "quality": "reported",
     "raw": "24",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.385474,
     "max": 0.385474,
     "quality": "reported",
     "raw": "0.385474447",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.38475,
     "max": 0.38475,
     "quality": "reported",
     "raw": "0.384750235",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 200,
     "max": 200,
     "quality": "reported",
     "raw": "200",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.198605,
     "max": 0.198605,
     "quality": "reported",
     "raw": "0.19860458",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/166",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21174 F3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 166,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174F3_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 21:01:22:504 ,Experiment: 5,Test Point: 21174F3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21174F3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21174F3_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 21:01:22:504 ,Experiment: 5,Test Point: 21174F3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21174F3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2639.32,
     "max": 2639.32,
     "quality": "reported",
     "raw": "2639.316981",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 23,
     "max": 23,
     "quality": "reported",
     "raw": "23",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.38475,
     "max": 0.38475,
     "quality": "reported",
     "raw": "0.384750235",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.384056,
     "max": 0.384056,
     "quality": "reported",
     "raw": "0.384056477",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 203,
     "max": 203,
     "quality": "reported",
     "raw": "203",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.198321,
     "max": 0.198321,
     "quality": "reported",
     "raw": "0.198320974",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/167",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21174 F4",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 167,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "PMT 1 Gain: 5.500000",
     "column": "row 0, column PMT 1 Gain: 5.500000",
     "note": "From NASA's file PSI-159_Raw Data_21174F4_data.csv, row 0, column PMT 1 Gain: 5.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 21:14:53:692 ,Experiment: 5,Test Point: 21174F4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21174F4_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.000000",
     "column": "row 0, column PMT 3 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21174F4_data.csv, row 0, column PMT 3 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-06-23 174 21:14:53:692 ,Experiment: 5,Test Point: 21174F4,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 20,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 1,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 5.500000,PMT 2 Gain: 6.000000,PMT 3 Gain: 6.000000",
     "evidence_source": "file:PSI-159_Raw Data_21174F4_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2638.35,
     "max": 2638.35,
     "quality": "reported",
     "raw": "2638.353796",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 35,
     "max": 35,
     "quality": "reported",
     "raw": "35",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.384056,
     "max": 0.384056,
     "quality": "reported",
     "raw": "0.384056477",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.383001,
     "max": 0.383001,
     "quality": "reported",
     "raw": "0.383001402",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 242,
     "max": 242,
     "quality": "reported",
     "raw": "242",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.198049,
     "max": 0.198049,
     "quality": "reported",
     "raw": "0.198049053",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/168",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21291 A1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 168,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21291A1_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-18 291 17:52:24:811 ,Experiment: 5,Test Point: 21291A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291A1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6.5,
     "max": 6.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.500000",
     "column": "row 0, column PMT 3 Gain: 6.500000",
     "note": "From NASA's file PSI-159_Raw Data_21291A1_data.csv, row 0, column PMT 3 Gain: 6.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-18 291 17:52:24:811 ,Experiment: 5,Test Point: 21291A1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291A1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2658.85,
     "max": 2658.85,
     "quality": "reported",
     "raw": "2658.848468",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 167,
     "max": 167,
     "quality": "reported",
     "raw": "167",
     "column": "burn time (sec)"
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "yes, PCI-G",
     "column": "Cool flame?"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "bonus day after inverse tests",
     "quality": "reported",
     "raw": "bonus day after inverse tests",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.3993,
     "max": 0.3993,
     "quality": "reported",
     "raw": "0.3993",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.394233,
     "max": 0.394233,
     "quality": "reported",
     "raw": "0.394233062",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 364,
     "max": 364,
     "quality": "reported",
     "raw": "364",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.20397,
     "max": 0.20397,
     "quality": "reported",
     "raw": "0.203970074",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/169",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21291 C1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 169,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21291C1_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-18 291 18:33:54:232 ,Experiment: 5,Test Point: 21291C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291C1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6.5,
     "max": 6.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.500000",
     "column": "row 0, column PMT 3 Gain: 6.500000",
     "note": "From NASA's file PSI-159_Raw Data_21291C1_data.csv, row 0, column PMT 3 Gain: 6.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-18 291 18:33:54:232 ,Experiment: 5,Test Point: 21291C1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291C1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2652.19,
     "max": 2652.19,
     "quality": "reported",
     "raw": "2652.186558",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 246,
     "max": 246,
     "quality": "reported",
     "raw": "246",
     "column": "burn time (sec)"
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "yes, PCI-F",
     "column": "Cool flame?"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "5 transitions from hot to cool, 6 hot and 5 cool flames",
     "quality": "reported",
     "raw": "5 transitions from hot to cool, 6 hot and 5 cool flames",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394233,
     "max": 0.394233,
     "quality": "reported",
     "raw": "0.394233062",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.389271,
     "max": 0.389271,
     "quality": "reported",
     "raw": "0.389271344",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 435,
     "max": 435,
     "quality": "reported",
     "raw": "435",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.202014,
     "max": 0.202014,
     "quality": "reported",
     "raw": "0.202014347",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/170",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21291 C2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 170,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21291C2_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-18 291 19:17:46:349 ,Experiment: 5,Test Point: 21291C2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291C2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6.5,
     "max": 6.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.500000",
     "column": "row 0, column PMT 3 Gain: 6.500000",
     "note": "From NASA's file PSI-159_Raw Data_21291C2_data.csv, row 0, column PMT 3 Gain: 6.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-18 291 19:17:46:349 ,Experiment: 5,Test Point: 21291C2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291C2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2645.52,
     "max": 2645.52,
     "quality": "reported",
     "raw": "2645.520346",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 27,
     "max": 27,
     "quality": "reported",
     "raw": "27",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.75,
     "max": 1.75,
     "quality": "reported",
     "raw": "1.75",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.389271,
     "max": 0.389271,
     "quality": "reported",
     "raw": "0.389271344",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.388319,
     "max": 0.388319,
     "quality": "reported",
     "raw": "0.388318854",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 182,
     "max": 182,
     "quality": "reported",
     "raw": "182",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.200087,
     "max": 0.200087,
     "quality": "reported",
     "raw": "0.200087289",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/171",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21291 B1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 171,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21291B1_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-18 291 20:21:01:525 ,Experiment: 5,Test Point: 21291B1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291B1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6.5,
     "max": 6.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.500000",
     "column": "row 0, column PMT 3 Gain: 6.500000",
     "note": "From NASA's file PSI-159_Raw Data_21291B1_data.csv, row 0, column PMT 3 Gain: 6.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-18 291 20:21:01:525 ,Experiment: 5,Test Point: 21291B1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291B1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2644.22,
     "max": 2644.22,
     "quality": "reported",
     "raw": "2644.223892",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 32,
     "max": 32,
     "quality": "reported",
     "raw": "32",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.75,
     "max": 1.75,
     "quality": "reported",
     "raw": "1.75",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.388319,
     "max": 0.388319,
     "quality": "reported",
     "raw": "0.388318854",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.387191,
     "max": 0.387191,
     "quality": "reported",
     "raw": "0.387190712",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 193,
     "max": 193,
     "quality": "reported",
     "raw": "193",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.199716,
     "max": 0.199716,
     "quality": "reported",
     "raw": "0.199715995",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/172",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21291 H1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 172,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21291H1_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-18 291 20:56:15:152 ,Experiment: 5,Test Point: 21291H1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291H1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6.5,
     "max": 6.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.500000",
     "column": "row 0, column PMT 3 Gain: 6.500000",
     "note": "From NASA's file PSI-159_Raw Data_21291H1_data.csv, row 0, column PMT 3 Gain: 6.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-18 291 20:56:15:152 ,Experiment: 5,Test Point: 21291H1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291H1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2538.44,
     "max": 2538.44,
     "quality": "reported",
     "raw": "2538.440812",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 35,
     "max": 35,
     "quality": "reported",
     "raw": "35",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.25,
     "max": 1.25,
     "quality": "reported",
     "raw": "1.25",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.387191,
     "max": 0.387191,
     "quality": "reported",
     "raw": "0.387190712",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.386174,
     "max": 0.386174,
     "quality": "reported",
     "raw": "0.386174345",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 216,
     "max": 216,
     "quality": "reported",
     "raw": "216",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.304136,
     "max": 0.304136,
     "quality": "reported",
     "raw": "0.304135817",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/173",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21291 H2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 173,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21291H2_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-18 291 21:19:28:301 ,Experiment: 5,Test Point: 21291H2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291H2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6.5,
     "max": 6.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.500000",
     "column": "row 0, column PMT 3 Gain: 6.500000",
     "note": "From NASA's file PSI-159_Raw Data_21291H2_data.csv, row 0, column PMT 3 Gain: 6.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-18 291 21:19:28:301 ,Experiment: 5,Test Point: 21291H2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291H2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2537.06,
     "max": 2537.06,
     "quality": "reported",
     "raw": "2537.057866",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 158,
     "max": 158,
     "quality": "reported",
     "raw": "158",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Hit the burner temperature limit",
     "quality": "reported",
     "raw": "Hit the burner temperature limit",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.386174,
     "max": 0.386174,
     "quality": "reported",
     "raw": "0.386174345",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.383428,
     "max": 0.383428,
     "quality": "reported",
     "raw": "0.383427837",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 456,
     "max": 456,
     "quality": "reported",
     "raw": "456",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 202.66,
     "max": 202.66,
     "quality": "reported",
     "raw": "2.0266",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.303609,
     "max": 0.303609,
     "quality": "reported",
     "raw": "0.303608807",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/174",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21291 D1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 174,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21291D1_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-19 292 00:09:46:079 ,Experiment: 5,Test Point: 21291D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291D1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6.5,
     "max": 6.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.500000",
     "column": "row 0, column PMT 3 Gain: 6.500000",
     "note": "From NASA's file PSI-159_Raw Data_21291D1_data.csv, row 0, column PMT 3 Gain: 6.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-19 292 00:09:46:079 ,Experiment: 5,Test Point: 21291D1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291D1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2656.89,
     "max": 2656.89,
     "quality": "reported",
     "raw": "2656.891203",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 47,
     "max": 47,
     "quality": "reported",
     "raw": "47",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.3978,
     "max": 0.3978,
     "quality": "reported",
     "raw": "0.3978",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.394947,
     "max": 0.394947,
     "quality": "reported",
     "raw": "0.394946781",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 258,
     "max": 258,
     "quality": "reported",
     "raw": "258",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.203392,
     "max": 0.203392,
     "quality": "reported",
     "raw": "0.203392384",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/175",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21291 G1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 175,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21291G1_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-19 292 00:22:06:650 ,Experiment: 5,Test Point: 21291G1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291G1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6.5,
     "max": 6.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.500000",
     "column": "row 0, column PMT 3 Gain: 6.500000",
     "note": "From NASA's file PSI-159_Raw Data_21291G1_data.csv, row 0, column PMT 3 Gain: 6.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-19 292 00:22:06:650 ,Experiment: 5,Test Point: 21291G1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291G1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2653.13,
     "max": 2653.13,
     "quality": "reported",
     "raw": "2653.133679",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 161,
     "max": 161,
     "quality": "reported",
     "raw": "161",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.394947,
     "max": 0.394947,
     "quality": "reported",
     "raw": "0.394946781",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.388455,
     "max": 0.388455,
     "quality": "reported",
     "raw": "0.38845523",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 428,
     "max": 428,
     "quality": "reported",
     "raw": "428",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.202291,
     "max": 0.202291,
     "quality": "reported",
     "raw": "0.202290569",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/176",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21291 G2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 176,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21291G2_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-19 292 00:37:52:629 ,Experiment: 5,Test Point: 21291G2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291G2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6.5,
     "max": 6.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.500000",
     "column": "row 0, column PMT 3 Gain: 6.500000",
     "note": "From NASA's file PSI-159_Raw Data_21291G2_data.csv, row 0, column PMT 3 Gain: 6.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-19 292 00:37:52:629 ,Experiment: 5,Test Point: 21291G2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291G2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2644.41,
     "max": 2644.41,
     "quality": "reported",
     "raw": "2644.409854",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.25,
     "max": 1.25,
     "quality": "reported",
     "raw": "1.25",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.388455,
     "max": 0.388455,
     "quality": "reported",
     "raw": "0.38845523",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.385436,
     "max": 0.385436,
     "quality": "reported",
     "raw": "0.385436483",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 311,
     "max": 311,
     "quality": "reported",
     "raw": "311",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.199769,
     "max": 0.199769,
     "quality": "reported",
     "raw": "0.199769183",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/177",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21291 J1",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 177,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21291J1_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-19 292 01:15:27:502 ,Experiment: 5,Test Point: 21291J1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291J1_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6.5,
     "max": 6.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.500000",
     "column": "row 0, column PMT 3 Gain: 6.500000",
     "note": "From NASA's file PSI-159_Raw Data_21291J1_data.csv, row 0, column PMT 3 Gain: 6.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-19 292 01:15:27:502 ,Experiment: 5,Test Point: 21291J1,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291J1_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2536.05,
     "max": 2536.05,
     "quality": "reported",
     "raw": "2536.049087",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 80,
     "max": 80,
     "quality": "reported",
     "raw": "80",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "FT",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "notes": {
     "text": "Hit the burner temperature limit",
     "quality": "reported",
     "raw": "Hit the burner temperature limit",
     "column": "Comments"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.385436,
     "max": 0.385436,
     "quality": "reported",
     "raw": "0.385436483",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.382657,
     "max": 0.382657,
     "quality": "reported",
     "raw": "0.382657026",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 454,
     "max": 454,
     "quality": "reported",
     "raw": "454",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.303226,
     "max": 0.303226,
     "quality": "reported",
     "raw": "0.303225617",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/178",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21291 J2",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 178,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21291J2_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-19 292 01:28:05:627 ,Experiment: 5,Test Point: 21291J2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291J2_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6.5,
     "max": 6.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.500000",
     "column": "row 0, column PMT 3 Gain: 6.500000",
     "note": "From NASA's file PSI-159_Raw Data_21291J2_data.csv, row 0, column PMT 3 Gain: 6.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-19 292 01:28:05:627 ,Experiment: 5,Test Point: 21291J2,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291J2_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2532.21,
     "max": 2532.21,
     "quality": "reported",
     "raw": "2532.212453",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 27,
     "max": 27,
     "quality": "reported",
     "raw": "27",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.382657,
     "max": 0.382657,
     "quality": "reported",
     "raw": "0.382657026",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.380784,
     "max": 0.380784,
     "quality": "reported",
     "raw": "0.380783875",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 152,
     "max": 152,
     "quality": "reported",
     "raw": "152",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.301778,
     "max": 0.301778,
     "quality": "reported",
     "raw": "0.301777696",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-159/cfig-normal/179",
   "accession": "PSI-159",
   "investigation": "CFI-G",
   "type": "test",
   "label": "21291 J3",
   "source_table": "PSI-159_Experimental table_CFI-G_Normal Flames.csv",
   "source_row": 179,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-159",
   "values": {
    "acme_pmt1_gain": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "PMT 1 Gain: 6.000000",
     "column": "row 0, column PMT 1 Gain: 6.000000",
     "note": "From NASA's file PSI-159_Raw Data_21291J3_data.csv, row 0, column PMT 1 Gain: 6.000000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-19 292 01:41:19:001 ,Experiment: 5,Test Point: 21291J3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291J3_data.csv"
    },
    "acme_pmt3_gain": {
     "min": 6.5,
     "max": 6.5,
     "quality": "reported",
     "raw": "PMT 3 Gain: 6.500000",
     "column": "row 0, column PMT 3 Gain: 6.500000",
     "note": "From NASA's file PSI-159_Raw Data_21291J3_data.csv, row 0, column PMT 3 Gain: 6.500000. This is a setting, not a measurement. From the log's set-up line (line 1 of the file, above the column header, which check_pack counts as row 0).",
     "evidence": "2021-10-19 292 01:41:19:001 ,Experiment: 5,Test Point: 21291J3,MFCA1 Gas: 2,MFCA1 Full Scale: 20.000000,MFCA2 Gas: 0,MFCA2 Full Scale: 2.000000,MFCA3 Gas: 23,MFCA3 Full Scale: 0.500000,EField: 0,EFieldPol: 0,Igniter: 0,Burner: 0,Thermocouple: 0,Radiometer: 2,IPSU 1: 0,IPSU 2: 0,IPSU 3: 0,IPSU 4: 0,IPSU 5: 1,IPSU 6: 0,Fiber: 1,PMT 1 Gain: 6.000000,PMT 2 Gain: 6.500000,PMT 3 Gain: 6.500000",
     "evidence_source": "file:PSI-159_Raw Data_21291J3_data.csv"
    },
    "adiabatic_flame_temp_k": {
     "min": 2529.59,
     "max": 2529.59,
     "quality": "reported",
     "raw": "2529.593621",
     "column": "Tad (K)"
    },
    "burn_time_s": {
     "min": 83,
     "max": 83,
     "quality": "reported",
     "raw": "83",
     "column": "burn time (sec)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "SE",
     "column": "Self-ext or flow term"
    },
    "flame_type": {
     "text": "normal",
     "quality": "reported",
     "raw": "Normal",
     "column": "Flame Type"
    },
    "fuel": {
     "text": "n-butane",
     "quality": "reported",
     "raw": "30% butane",
     "column": "Fuel"
    },
    "fuel_flow_mg_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "mHC (mg/s)"
    },
    "fuel_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "Xf"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "Flames of Gaseous Fuels",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "Perform spherical diffusion flame tests aboard the International Space Station",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "Hot ignition"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "normal and inverse convection directions",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.380784,
     "max": 0.380784,
     "quality": "reported",
     "raw": "0.380783875",
     "column": "XO2 before test"
    },
    "o2_fraction_final": {
     "min": 0.376958,
     "max": 0.376958,
     "quality": "reported",
     "raw": "0.376957554",
     "column": "XO2 after test"
    },
    "peak_burner_temp_c": {
     "min": 330,
     "max": 330,
     "quality": "reported",
     "raw": "330",
     "column": "Peak burner T (C )"
    },
    "pressure_kpa": {
     "min": 101.33,
     "max": 101.33,
     "quality": "reported",
     "raw": "1.0133",
     "column": "approx p (bar)"
    },
    "stoich_mixture_fraction": {
     "min": 0.300798,
     "max": 0.300798,
     "quality": "reported",
     "raw": "0.300797888",
     "column": "Zst"
    }
   }
  },
  {
   "id": "PSI-20/bre/1",
   "accession": "PSI-20",
   "investigation": "BRE",
   "type": "session",
   "label": "2019 Feb 8",
   "source_table": "PSI-20_Experimental table_ACME BRE.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-20",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "flames_ignited": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "flat porous burner",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.4,
     "levels": [
      0.21,
      0.265,
      0.4
     ],
     "quality": "reported",
     "raw": "21; 26.5; 40",
     "column": "Oxygen Conc (percent)"
    },
    "size_mm": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Burner Size (mm)"
    },
    "test_date": {
     "text": "2019-02-08",
     "quality": "reported",
     "raw": "2019 Feb 8",
     "column": "Year / Month / Date"
    }
   }
  },
  {
   "id": "PSI-20/bre/2",
   "accession": "PSI-20",
   "investigation": "BRE",
   "type": "session",
   "label": "2019 Feb 20",
   "source_table": "PSI-20_Experimental table_ACME BRE.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-20",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "flames_ignited": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "flat porous burner",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.265,
     "max": 0.34,
     "levels": [
      0.265,
      0.34
     ],
     "quality": "reported",
     "raw": "26.5; 34",
     "column": "Oxygen Conc (percent)"
    },
    "size_mm": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Burner Size (mm)"
    },
    "test_date": {
     "text": "2019-02-20",
     "quality": "reported",
     "raw": "2019 Feb 20",
     "column": "Year / Month / Date"
    }
   }
  },
  {
   "id": "PSI-20/bre/3",
   "accession": "PSI-20",
   "investigation": "BRE",
   "type": "session",
   "label": "2019 Feb 25",
   "source_table": "PSI-20_Experimental table_ACME BRE.csv",
   "source_row": 3,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-20",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "flames_ignited": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "50% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "flat porous burner",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.4,
     "levels": [
      0.21,
      0.265,
      0.34,
      0.4
     ],
     "quality": "reported",
     "raw": "21; 26.5; 34; 40",
     "column": "Oxygen Conc (percent)"
    },
    "size_mm": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Burner Size (mm)"
    },
    "test_date": {
     "text": "2019-02-25",
     "quality": "reported",
     "raw": "2019 Feb 25",
     "column": "Year / Month / Date"
    }
   }
  },
  {
   "id": "PSI-20/bre/4",
   "accession": "PSI-20",
   "investigation": "BRE",
   "type": "session",
   "label": "2019 March 4",
   "source_table": "PSI-20_Experimental table_ACME BRE.csv",
   "source_row": 4,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-20",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "flames_ignited": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "6",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "50% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "flat porous burner",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.265,
     "max": 0.4,
     "levels": [
      0.265,
      0.4
     ],
     "quality": "reported",
     "raw": "26.5; 40",
     "column": "Oxygen Conc (percent)"
    },
    "size_mm": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Burner Size (mm)"
    },
    "test_date": {
     "text": "2019-03-04",
     "quality": "reported",
     "raw": "2019 March 4",
     "column": "Year / Month / Date"
    }
   }
  },
  {
   "id": "PSI-20/bre/5",
   "accession": "PSI-20",
   "investigation": "BRE",
   "type": "session",
   "label": "2019 March 7",
   "source_table": "PSI-20_Experimental table_ACME BRE.csv",
   "source_row": 5,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-20",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "flames_ignited": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "6",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "50% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "flat porous burner",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.34,
     "max": 0.34,
     "quality": "corrected",
     "raw": "34",
     "column": "Oxygen Conc (percent)",
     "note": "The PSI table reads '3400%'. A percent format was applied to the number 34 in the PSI table; the column is already in percent."
    },
    "size_mm": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Burner Size (mm)"
    },
    "test_date": {
     "text": "2019-03-07",
     "quality": "reported",
     "raw": "2019 March 7",
     "column": "Year / Month / Date"
    }
   }
  },
  {
   "id": "PSI-20/bre/6",
   "accession": "PSI-20",
   "investigation": "BRE",
   "type": "session",
   "label": "2019 March 11",
   "source_table": "PSI-20_Experimental table_ACME BRE.csv",
   "source_row": 6,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-20",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "flames_ignited": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "7",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "50% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "flat porous burner",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.265,
     "max": 0.34,
     "levels": [
      0.265,
      0.34
     ],
     "quality": "reported",
     "raw": "26.5; 34",
     "column": "Oxygen Conc (percent)"
    },
    "size_mm": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Burner Size (mm)"
    },
    "test_date": {
     "text": "2019-03-11",
     "quality": "reported",
     "raw": "2019 March 11",
     "column": "Year / Month / Date"
    }
   }
  },
  {
   "id": "PSI-20/bre/7",
   "accession": "PSI-20",
   "investigation": "BRE",
   "type": "session",
   "label": "2019 March 28",
   "source_table": "PSI-20_Experimental table_ACME BRE.csv",
   "source_row": 7,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-20",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "flames_ignited": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "100%C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100%C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "flat porous burner",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.265,
     "max": 0.34,
     "levels": [
      0.265,
      0.34
     ],
     "quality": "reported",
     "raw": "26.5; 34",
     "column": "Oxygen Conc (percent)"
    },
    "size_mm": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Burner Size (mm)"
    },
    "test_date": {
     "text": "2019-03-28",
     "quality": "reported",
     "raw": "2019 March 28",
     "column": "Year / Month / Date"
    }
   }
  },
  {
   "id": "PSI-20/bre/8",
   "accession": "PSI-20",
   "investigation": "BRE",
   "type": "session",
   "label": "2019 April 1",
   "source_table": "PSI-20_Experimental table_ACME BRE.csv",
   "source_row": 8,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-20",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "flames_ignited": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "100%C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100%C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "flat porous burner",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "corrected",
     "raw": "21",
     "column": "Oxygen Conc (percent)",
     "note": "The PSI table reads '2100%'. A percent format was applied to the number 21 in the PSI table; the column is already in percent."
    },
    "size_mm": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Burner Size (mm)"
    },
    "test_date": {
     "text": "2019-04-01",
     "quality": "reported",
     "raw": "2019 April 1",
     "column": "Year / Month / Date"
    }
   }
  },
  {
   "id": "PSI-20/bre/9",
   "accession": "PSI-20",
   "investigation": "BRE",
   "type": "session",
   "label": "2019 April 4",
   "source_table": "PSI-20_Experimental table_ACME BRE.csv",
   "source_row": 9,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-20",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "flames_ignited": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "100%C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100%C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "flat porous burner",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.34,
     "levels": [
      0.21,
      0.265,
      0.34
     ],
     "quality": "reported",
     "raw": "21; 26.5; 34",
     "column": "Oxygen Conc (percent)"
    },
    "size_mm": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Burner Size (mm)"
    },
    "test_date": {
     "text": "2019-04-04",
     "quality": "reported",
     "raw": "2019 April 4",
     "column": "Year / Month / Date"
    }
   }
  },
  {
   "id": "PSI-20/bre/10",
   "accession": "PSI-20",
   "investigation": "BRE",
   "type": "session",
   "label": "2020 Sept 3",
   "source_table": "PSI-20_Experimental table_ACME BRE.csv",
   "source_row": 10,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-20",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "flames_ignited": {
     "min": 13,
     "max": 13,
     "quality": "reported",
     "raw": "13",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "flat porous burner",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.25,
     "max": 0.4,
     "levels": [
      0.25,
      0.34,
      0.4
     ],
     "quality": "reported",
     "raw": "25; 34; 40",
     "column": "Oxygen Conc (percent)"
    },
    "size_mm": {
     "min": 50,
     "max": 50,
     "quality": "reported",
     "raw": "50",
     "column": "Burner Size (mm)"
    },
    "test_date": {
     "text": "2020-09-03",
     "quality": "reported",
     "raw": "2020 Sept 3",
     "column": "Year / Month / Date"
    }
   }
  },
  {
   "id": "PSI-20/bre/11",
   "accession": "PSI-20",
   "investigation": "BRE",
   "type": "session",
   "label": "2020 Oct 17",
   "source_table": "PSI-20_Experimental table_ACME BRE.csv",
   "source_row": 11,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-20",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "flames_ignited": {
     "min": 13,
     "max": 13,
     "quality": "reported",
     "raw": "13",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "flat porous burner",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.265,
     "max": 0.34,
     "levels": [
      0.265,
      0.34
     ],
     "quality": "reported",
     "raw": "26.5; 34",
     "column": "Oxygen Conc (percent)"
    },
    "size_mm": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Burner Size (mm)"
    },
    "test_date": {
     "text": "2020-10-17",
     "quality": "reported",
     "raw": "2020 Oct 17",
     "column": "Year / Month / Date"
    }
   }
  },
  {
   "id": "PSI-20/bre/12",
   "accession": "PSI-20",
   "investigation": "BRE",
   "type": "session",
   "label": "2020 Dec 5",
   "source_table": "PSI-20_Experimental table_ACME BRE.csv",
   "source_row": 12,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-20",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "flames_ignited": {
     "min": 21,
     "max": 21,
     "quality": "reported",
     "raw": "21",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "100% CH4",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100% CH4",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "flat porous burner",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.25,
     "max": 0.4,
     "levels": [
      0.25,
      0.34,
      0.4
     ],
     "quality": "reported",
     "raw": "25; 34; 40",
     "column": "Oxygen Conc (percent)"
    },
    "size_mm": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Burner Size (mm)"
    },
    "test_date": {
     "text": "2020-12-05",
     "quality": "reported",
     "raw": "2020 Dec 5",
     "column": "Year / Month / Date"
    }
   }
  },
  {
   "id": "PSI-20/bre/13",
   "accession": "PSI-20",
   "investigation": "BRE",
   "type": "session",
   "label": "2020 Dec 4",
   "source_table": "PSI-20_Experimental table_ACME BRE.csv",
   "source_row": 13,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-20",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "flames_ignited": {
     "min": 18,
     "max": 18,
     "quality": "reported",
     "raw": "18",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "100% CH4",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100% CH4",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "flat porous burner",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.25,
     "max": 0.4,
     "levels": [
      0.25,
      0.4
     ],
     "quality": "reported",
     "raw": "25; 40",
     "column": "Oxygen Conc (percent)"
    },
    "size_mm": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Burner Size (mm)"
    },
    "test_date": {
     "text": "2020-12-04",
     "quality": "reported",
     "raw": "2020 Dec 4",
     "column": "Year / Month / Date"
    }
   }
  },
  {
   "id": "PSI-20/bre/14",
   "accession": "PSI-20",
   "investigation": "BRE",
   "type": "session",
   "label": "2020 Dec 11",
   "source_table": "PSI-20_Experimental table_ACME BRE.csv",
   "source_row": 14,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-20",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "flames_ignited": {
     "min": 12,
     "max": 12,
     "quality": "reported",
     "raw": "12",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "50% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "flat porous burner",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.25,
     "max": 0.4,
     "levels": [
      0.25,
      0.4
     ],
     "quality": "reported",
     "raw": "25; 40",
     "column": "Oxygen Conc (percent)"
    },
    "size_mm": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Burner Size (mm)"
    },
    "test_date": {
     "text": "2020-12-11",
     "quality": "reported",
     "raw": "2020 Dec 11",
     "column": "Year / Month / Date"
    }
   }
  },
  {
   "id": "PSI-20/bre/15",
   "accession": "PSI-20",
   "investigation": "BRE",
   "type": "session",
   "label": "2020 Dec 17",
   "source_table": "PSI-20_Experimental table_ACME BRE.csv",
   "source_row": 15,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-20",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "flames_ignited": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "flat porous burner",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.34,
     "max": 0.4,
     "levels": [
      0.34,
      0.4
     ],
     "quality": "reported",
     "raw": "34; 40",
     "column": "Oxygen Conc (percent)"
    },
    "size_mm": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Burner Size (mm)"
    },
    "test_date": {
     "text": "2020-12-17",
     "quality": "reported",
     "raw": "2020 Dec 17",
     "column": "Year / Month / Date"
    }
   }
  },
  {
   "id": "PSI-20/bre/16",
   "accession": "PSI-20",
   "investigation": "BRE",
   "type": "session",
   "label": "2020 Dec 23",
   "source_table": "PSI-20_Experimental table_ACME BRE.csv",
   "source_row": 16,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-20",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "flames_ignited": {
     "min": 17,
     "max": 17,
     "quality": "reported",
     "raw": "17",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "flat porous burner",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.25,
     "max": 0.4,
     "levels": [
      0.25,
      0.34,
      0.4
     ],
     "quality": "reported",
     "raw": "25; 34; 40",
     "column": "Oxygen Conc (percent)"
    },
    "size_mm": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Burner Size (mm)"
    },
    "test_date": {
     "text": "2020-12-23",
     "quality": "reported",
     "raw": "2020 Dec 23",
     "column": "Year / Month / Date"
    }
   }
  },
  {
   "id": "PSI-20/bre/17",
   "accession": "PSI-20",
   "investigation": "BRE",
   "type": "session",
   "label": "2021 Jan 20",
   "source_table": "PSI-20_Experimental table_ACME BRE.csv",
   "source_row": 17,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-20",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "flames_ignited": {
     "min": 15,
     "max": 15,
     "quality": "reported",
     "raw": "15",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "flat porous burner",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.34,
     "levels": [
      0.21,
      0.265,
      0.34
     ],
     "quality": "reported",
     "raw": "21; 26.5; 34",
     "column": "Oxygen Conc (percent)"
    },
    "size_mm": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Burner Size (mm)"
    },
    "test_date": {
     "text": "2021-01-20",
     "quality": "reported",
     "raw": "2021 Jan 20",
     "column": "Year / Month / Date"
    }
   }
  },
  {
   "id": "PSI-20/bre/18",
   "accession": "PSI-20",
   "investigation": "BRE",
   "type": "session",
   "label": "2021 Jan 28",
   "source_table": "PSI-20_Experimental table_ACME BRE.csv",
   "source_row": 18,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-20",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "flames_ignited": {
     "min": 13,
     "max": 13,
     "quality": "reported",
     "raw": "13",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "flat porous burner",
     "quality": "context",
     "evidence": "porous circular burners of 25 and 50 mm diameter",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Consider O2/N2 ambients",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.25,
     "max": 0.4,
     "levels": [
      0.25,
      0.34,
      0.4
     ],
     "quality": "reported",
     "raw": "25; 34; 40",
     "column": "Oxygen Conc (percent)"
    },
    "size_mm": {
     "min": 50,
     "max": 50,
     "quality": "reported",
     "raw": "50",
     "column": "Burner Size (mm)"
    },
    "test_date": {
     "text": "2021-01-28",
     "quality": "reported",
     "raw": "2021 Jan 28",
     "column": "Year / Month / Date"
    }
   }
  },
  {
   "id": "PSI-21/cld/1",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 17319",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Methane based test",
     "quality": "reported",
     "raw": "Methane based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "40% CH4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.4,
     "quality": "reported",
     "raw": "30%-40%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2017-11-15",
     "quality": "reported",
     "raw": "17319",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/2",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 17324",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Methane based test",
     "quality": "reported",
     "raw": "Methane based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "corrected",
     "raw": "40% CH4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '40% CH5', a spreadsheet auto-fill artefact; restored to '40% CH4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.4,
     "quality": "reported",
     "raw": "30%-40%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2017-11-20",
     "quality": "reported",
     "raw": "17324",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/3",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 17342",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 3,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Methane based test",
     "quality": "reported",
     "raw": "Methane based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "corrected",
     "raw": "40% CH4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '40% CH6', a spreadsheet auto-fill artefact; restored to '40% CH4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "40%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2017-12-08",
     "quality": "reported",
     "raw": "17342",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/4",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 17356",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 4,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Methane based test",
     "quality": "reported",
     "raw": "Methane based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 3,
     "max": 3,
     "quality": "reported",
     "raw": "3",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "corrected",
     "raw": "40% CH4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '40% CH7', a spreadsheet auto-fill artefact; restored to '40% CH4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.4,
     "quality": "reported",
     "raw": "30%-40%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2017-12-22",
     "quality": "reported",
     "raw": "17356",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/5",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18003",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 5,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Methane based test",
     "quality": "reported",
     "raw": "Methane based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "corrected",
     "raw": "40% CH4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '40% CH8', a spreadsheet auto-fill artefact; restored to '40% CH4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.25,
     "max": 0.4,
     "quality": "reported",
     "raw": "25%-40%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-01-03",
     "quality": "reported",
     "raw": "18003",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/6",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18005",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 6,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Methane based test",
     "quality": "reported",
     "raw": "Methane based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "7",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "corrected",
     "raw": "40% CH4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '40% CH9', a spreadsheet auto-fill artefact; restored to '40% CH4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.4,
     "quality": "reported",
     "raw": "30%-40%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-01-05",
     "quality": "reported",
     "raw": "18005",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/7",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18008",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 7,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Methane based test",
     "quality": "reported",
     "raw": "Methane based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "corrected",
     "raw": "40% CH4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '40% CH10', a spreadsheet auto-fill artefact; restored to '40% CH4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.25,
     "max": 0.4,
     "quality": "reported",
     "raw": "25%-40%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-01-08",
     "quality": "reported",
     "raw": "18008",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/8",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18011",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 8,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Methane based test",
     "quality": "reported",
     "raw": "Methane based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 14,
     "max": 14,
     "quality": "reported",
     "raw": "14",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "corrected",
     "raw": "40% CH4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '40% CH11', a spreadsheet auto-fill artefact; restored to '40% CH4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.25,
     "max": 0.4,
     "quality": "reported",
     "raw": "25%-40%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-01-11",
     "quality": "reported",
     "raw": "18011",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/9",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18022",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 9,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Methane based test",
     "quality": "reported",
     "raw": "Methane based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 3,
     "max": 3,
     "quality": "reported",
     "raw": "3",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "corrected",
     "raw": "40% CH4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '40% CH12', a spreadsheet auto-fill artefact; restored to '40% CH4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.4,
     "quality": "reported",
     "raw": "30%-40%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-01-22",
     "quality": "reported",
     "raw": "18022",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/10",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18026",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 10,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Methane based test",
     "quality": "reported",
     "raw": "Methane based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 16,
     "max": 16,
     "quality": "reported",
     "raw": "16",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "corrected",
     "raw": "40% CH4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '40% CH13', a spreadsheet auto-fill artefact; restored to '40% CH4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.25,
     "max": 0.4,
     "quality": "reported",
     "raw": "25%-40%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-01-26",
     "quality": "reported",
     "raw": "18026",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/11",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18032",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 11,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Methane based test",
     "quality": "reported",
     "raw": "Methane based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 13,
     "max": 13,
     "quality": "reported",
     "raw": "13",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "corrected",
     "raw": "40% CH4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '40% CH14', a spreadsheet auto-fill artefact; restored to '40% CH4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.4,
     "quality": "reported",
     "raw": "30%-40%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-02-01",
     "quality": "reported",
     "raw": "18032",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/12",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18039",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 12,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Methane based test",
     "quality": "reported",
     "raw": "Methane based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "100% CH4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.8,
     "quality": "reported",
     "raw": "50%-80%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-02-08",
     "quality": "reported",
     "raw": "18039",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/13",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18043",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 13,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Methane based test",
     "quality": "reported",
     "raw": "Methane based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "corrected",
     "raw": "100% CH4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '100% CH5', a spreadsheet auto-fill artefact; restored to '100% CH4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 1,
     "quality": "reported",
     "raw": "50%-100%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-02-12",
     "quality": "reported",
     "raw": "18043",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/14",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18053",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 14,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Methane based test",
     "quality": "reported",
     "raw": "Methane based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 16,
     "max": 16,
     "quality": "reported",
     "raw": "16",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "corrected",
     "raw": "100% CH4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '100% CH6', a spreadsheet auto-fill artefact; restored to '100% CH4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.4,
     "quality": "reported",
     "raw": "30%-40%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-02-22",
     "quality": "reported",
     "raw": "18053",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/15",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18145",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 15,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Ethylene based test",
     "quality": "reported",
     "raw": "Ethylene based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 3,
     "max": 3,
     "quality": "reported",
     "raw": "3",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.8,
     "max": 1,
     "quality": "reported",
     "raw": "80%-100%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-05-25",
     "quality": "reported",
     "raw": "18145",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/16",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18151",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 16,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Ethylene based test",
     "quality": "reported",
     "raw": "Ethylene based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "corrected",
     "raw": "100% C2H4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '100% C2H5', a spreadsheet auto-fill artefact; restored to '100% C2H4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-05-31",
     "quality": "reported",
     "raw": "18151",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/17",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18177",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 17,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Ethylene based test",
     "quality": "reported",
     "raw": "Ethylene based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "corrected",
     "raw": "100% C2H4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '100% C2H6', a spreadsheet auto-fill artefact; restored to '100% C2H4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.8,
     "max": 1,
     "quality": "reported",
     "raw": "80%-100%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-06-26",
     "quality": "reported",
     "raw": "18177",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/18",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18186",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 18,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Ethylene based test",
     "quality": "reported",
     "raw": "Ethylene based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 14,
     "max": 14,
     "quality": "reported",
     "raw": "14",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "corrected",
     "raw": "100% C2H4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '100% C2H7', a spreadsheet auto-fill artefact; restored to '100% C2H4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.6,
     "max": 1,
     "quality": "reported",
     "raw": "60%-100%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-07-05",
     "quality": "reported",
     "raw": "18186",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/19",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18192",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 19,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Ethylene based test",
     "quality": "reported",
     "raw": "Ethylene based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "corrected",
     "raw": "100% C2H4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '100% C2H8', a spreadsheet auto-fill artefact; restored to '100% C2H4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.6,
     "quality": "reported",
     "raw": "50%-60%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-07-11",
     "quality": "reported",
     "raw": "18192",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/20",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18199",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 20,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Ethylene based test",
     "quality": "reported",
     "raw": "Ethylene based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 16,
     "max": 16,
     "quality": "reported",
     "raw": "16",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "corrected",
     "raw": "100% C2H4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '100% C2H9', a spreadsheet auto-fill artefact; restored to '100% C2H4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.4,
     "max": 1,
     "quality": "reported",
     "raw": "40%-100%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-07-18",
     "quality": "reported",
     "raw": "18199",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/21",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18214",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 21,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Ethylene based test",
     "quality": "reported",
     "raw": "Ethylene based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 13,
     "max": 13,
     "quality": "reported",
     "raw": "13",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "corrected",
     "raw": "100% C2H4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '100% C2H10', a spreadsheet auto-fill artefact; restored to '100% C2H4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-08-02",
     "quality": "reported",
     "raw": "18214",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/22",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18218",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 22,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Ethylene based test",
     "quality": "reported",
     "raw": "Ethylene based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 18,
     "max": 18,
     "quality": "reported",
     "raw": "18",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "corrected",
     "raw": "100% C2H4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '100% C2H11', a spreadsheet auto-fill artefact; restored to '100% C2H4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "80%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-08-06",
     "quality": "reported",
     "raw": "18218",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/23",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18235",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 23,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Ethylene based test",
     "quality": "reported",
     "raw": "Ethylene based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 16,
     "max": 16,
     "quality": "reported",
     "raw": "16",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "50% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-08-23",
     "quality": "reported",
     "raw": "18235",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/24",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18239",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 24,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Ethylene based test",
     "quality": "reported",
     "raw": "Ethylene based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 14,
     "max": 14,
     "quality": "reported",
     "raw": "14",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "corrected",
     "raw": "50% C2H4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '50% C2H5', a spreadsheet auto-fill artefact; restored to '50% C2H4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "40%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-08-27",
     "quality": "reported",
     "raw": "18239",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/25",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18241",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 25,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Ethylene based test",
     "quality": "reported",
     "raw": "Ethylene based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "6",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "corrected",
     "raw": "50% C2H4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '50% C2H6', a spreadsheet auto-fill artefact; restored to '50% C2H4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.1,
     "max": 0.2,
     "quality": "reported",
     "raw": "10%-20%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-08-29",
     "quality": "reported",
     "raw": "18241",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/26",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18249",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 26,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Ethylene based test",
     "quality": "reported",
     "raw": "Ethylene based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 12,
     "max": 12,
     "quality": "reported",
     "raw": "12",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "corrected",
     "raw": "50% C2H4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '50% C2H7', a spreadsheet auto-fill artefact; restored to '50% C2H4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.1,
     "max": 0.3,
     "quality": "reported",
     "raw": "10%-30%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-09-06",
     "quality": "reported",
     "raw": "18249",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/27",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18253",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 27,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Ethylene based test",
     "quality": "reported",
     "raw": "Ethylene based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 14,
     "max": 14,
     "quality": "reported",
     "raw": "14",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "corrected",
     "raw": "50% C2H4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '50% C2H8', a spreadsheet auto-fill artefact; restored to '50% C2H4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.15,
     "max": 0.3,
     "quality": "reported",
     "raw": "15%-30%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-09-10",
     "quality": "reported",
     "raw": "18253",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/28",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 18257",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 28,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Ethylene based test",
     "quality": "reported",
     "raw": "Ethylene based test",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 15,
     "max": 15,
     "quality": "reported",
     "raw": "15",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "corrected",
     "raw": "50% C2H4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '50% C2H9', a spreadsheet auto-fill artefact; restored to '50% C2H4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.15,
     "max": 0.2,
     "quality": "reported",
     "raw": "15%-20%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2018-09-14",
     "quality": "reported",
     "raw": "18257",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/29",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 21041",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 29,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Improved coflow tests",
     "quality": "reported",
     "raw": "Improved coflow tests",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "30% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0,
     "max": 0.3,
     "quality": "reported",
     "raw": "0%-30%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2021-02-10",
     "quality": "reported",
     "raw": "21041",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/30",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 21046",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 30,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Improved coflow tests",
     "quality": "reported",
     "raw": "Improved coflow tests",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 16,
     "max": 16,
     "quality": "reported",
     "raw": "16",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "corrected",
     "raw": "30% C2H4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '30% C2H5', a spreadsheet auto-fill artefact; restored to '30% C2H4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.15,
     "max": 0.2,
     "quality": "reported",
     "raw": "15%-20%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2021-02-15",
     "quality": "reported",
     "raw": "21046",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/31",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 21050",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 31,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Improved coflow tests",
     "quality": "reported",
     "raw": "Improved coflow tests",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 16,
     "max": 16,
     "quality": "reported",
     "raw": "16",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "40% CH4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.2,
     "max": 0.4,
     "quality": "reported",
     "raw": "20%-40%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2021-02-19",
     "quality": "reported",
     "raw": "21050",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-21/cld/32",
   "accession": "PSI-21",
   "investigation": "CLD Flame",
   "type": "session",
   "label": "Day 21062",
   "source_table": "PSI-21_Experimental table_CLD Flame.csv",
   "source_row": 32,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-21",
   "values": {
    "description": {
     "text": "Improved coflow tests",
     "quality": "reported",
     "raw": "Improved coflow tests",
     "column": "Test Type"
    },
    "flames_ignited": {
     "min": 11,
     "max": 11,
     "quality": "reported",
     "raw": "11",
     "column": "Flames ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "corrected",
     "raw": "40% CH4",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '40% CH5', a spreadsheet auto-fill artefact; restored to '40% CH4'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "as diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.4,
     "quality": "reported",
     "raw": "30%-40%",
     "column": "Fuel conc. Range"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "context",
     "evidence": "weak coflow diffusion flames of methane and ethylene",
     "evidence_source": "psi"
    },
    "test_date": {
     "text": "2021-03-03",
     "quality": "reported",
     "raw": "21062",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-22/efield/1",
   "accession": "PSI-22",
   "investigation": "E-FIELD Flames",
   "type": "session",
   "label": "Day 18073",
   "source_table": "PSI-22_Experimental table_ACME E-FIELD Flames.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-22",
   "values": {
    "field_polarity": {
     "text": "negative",
     "quality": "reported",
     "raw": "negative",
     "column": "Mesh Polarity"
    },
    "flames_ignited": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "100% CH4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100%",
     "column": "Fuel Conc"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "The experiment is conducted with gas-fueled flames",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "reported",
     "raw": "First round of tests with coflow burner",
     "column": "Test Type"
    },
    "test_date": {
     "text": "2018-03-14",
     "quality": "reported",
     "raw": "18073",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-22/efield/2",
   "accession": "PSI-22",
   "investigation": "E-FIELD Flames",
   "type": "session",
   "label": "Day 18078",
   "source_table": "PSI-22_Experimental table_ACME E-FIELD Flames.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-22",
   "values": {
    "field_polarity": {
     "text": "negative",
     "quality": "reported",
     "raw": "negative",
     "column": "Mesh Polarity"
    },
    "flames_ignited": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "100% CH4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.7,
     "max": 1,
     "levels": [
      0.7,
      1
     ],
     "quality": "reported",
     "raw": "70%; 100%",
     "column": "Fuel Conc"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "The experiment is conducted with gas-fueled flames",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "reported",
     "raw": "First round of tests with coflow burner",
     "column": "Test Type"
    },
    "test_date": {
     "text": "2018-03-19",
     "quality": "reported",
     "raw": "18078",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-22/efield/4",
   "accession": "PSI-22",
   "investigation": "E-FIELD Flames",
   "type": "session",
   "label": "Day 18080",
   "source_table": "PSI-22_Experimental table_ACME E-FIELD Flames.csv",
   "source_row": 4,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-22",
   "values": {
    "field_polarity": {
     "text": "negative",
     "quality": "reported",
     "raw": "negative",
     "column": "Mesh Polarity"
    },
    "flames_ignited": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "40% CH4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "40%",
     "column": "Fuel Conc"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "The experiment is conducted with gas-fueled flames",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "reported",
     "raw": "First round of tests with coflow burner",
     "column": "Test Type"
    },
    "test_date": {
     "text": "2018-03-21",
     "quality": "reported",
     "raw": "18080",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-22/efield/5",
   "accession": "PSI-22",
   "investigation": "E-FIELD Flames",
   "type": "session",
   "label": "Day 18087",
   "source_table": "PSI-22_Experimental table_ACME E-FIELD Flames.csv",
   "source_row": 5,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-22",
   "values": {
    "field_polarity": {
     "text": "negative",
     "quality": "reported",
     "raw": "negative",
     "column": "Mesh Polarity"
    },
    "flames_ignited": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.8,
     "max": 1,
     "levels": [
      0.8,
      1
     ],
     "quality": "reported",
     "raw": "80%; 100%",
     "column": "Fuel Conc"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "The experiment is conducted with gas-fueled flames",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "reported",
     "raw": "First round of tests with coflow burner",
     "column": "Test Type"
    },
    "test_date": {
     "text": "2018-03-28",
     "quality": "reported",
     "raw": "18087",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-22/efield/7",
   "accession": "PSI-22",
   "investigation": "E-FIELD Flames",
   "type": "session",
   "label": "Day 18092",
   "source_table": "PSI-22_Experimental table_ACME E-FIELD Flames.csv",
   "source_row": 7,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-22",
   "values": {
    "field_polarity": {
     "text": "negative",
     "quality": "reported",
     "raw": "negative",
     "column": "Mesh Polarity"
    },
    "flames_ignited": {
     "min": 11,
     "max": 11,
     "quality": "reported",
     "raw": "11",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "30% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "30%",
     "column": "Fuel Conc"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "The experiment is conducted with gas-fueled flames",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "reported",
     "raw": "First round of tests with coflow burner",
     "column": "Test Type"
    },
    "test_date": {
     "text": "2018-04-02",
     "quality": "reported",
     "raw": "18092",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-22/efield/8",
   "accession": "PSI-22",
   "investigation": "E-FIELD Flames",
   "type": "session",
   "label": "Day 18095",
   "source_table": "PSI-22_Experimental table_ACME E-FIELD Flames.csv",
   "source_row": 8,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-22",
   "values": {
    "field_polarity": {
     "text": "positive",
     "quality": "reported",
     "raw": "positive",
     "column": "Mesh Polarity"
    },
    "flames_ignited": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "30% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "30%",
     "column": "Fuel Conc"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "The experiment is conducted with gas-fueled flames",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "reported",
     "raw": "First round of tests with coflow burner",
     "column": "Test Type"
    },
    "test_date": {
     "text": "2018-04-05",
     "quality": "reported",
     "raw": "18095",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-22/efield/9",
   "accession": "PSI-22",
   "investigation": "E-FIELD Flames",
   "type": "session",
   "label": "Day 18102",
   "source_table": "PSI-22_Experimental table_ACME E-FIELD Flames.csv",
   "source_row": 9,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-22",
   "values": {
    "field_polarity": {
     "text": "positive",
     "quality": "reported",
     "raw": "positive",
     "column": "Mesh Polarity"
    },
    "flames_ignited": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "40% CH4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "40%",
     "column": "Fuel Conc"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "The experiment is conducted with gas-fueled flames",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "reported",
     "raw": "First round of tests with coflow burner",
     "column": "Test Type"
    },
    "test_date": {
     "text": "2018-04-12",
     "quality": "reported",
     "raw": "18102",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-22/efield/10",
   "accession": "PSI-22",
   "investigation": "E-FIELD Flames",
   "type": "session",
   "label": "Day 18106",
   "source_table": "PSI-22_Experimental table_ACME E-FIELD Flames.csv",
   "source_row": 10,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-22",
   "values": {
    "field_polarity": {
     "text": "positive",
     "quality": "reported",
     "raw": "positive",
     "column": "Mesh Polarity"
    },
    "flames_ignited": {
     "min": 13,
     "max": 13,
     "quality": "reported",
     "raw": "13",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "40% CH4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "40%",
     "column": "Fuel Conc"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "The experiment is conducted with gas-fueled flames",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "reported",
     "raw": "First round of tests with coflow burner",
     "column": "Test Type"
    },
    "test_date": {
     "text": "2018-04-16",
     "quality": "reported",
     "raw": "18106",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-22/efield/11",
   "accession": "PSI-22",
   "investigation": "E-FIELD Flames",
   "type": "session",
   "label": "Day 18113",
   "source_table": "PSI-22_Experimental table_ACME E-FIELD Flames.csv",
   "source_row": 11,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-22",
   "values": {
    "field_polarity": {
     "text": "positive",
     "quality": "reported",
     "raw": "positive",
     "column": "Mesh Polarity"
    },
    "flames_ignited": {
     "min": 15,
     "max": 15,
     "quality": "reported",
     "raw": "15",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "100% CH4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100%",
     "column": "Fuel Conc"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "The experiment is conducted with gas-fueled flames",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "reported",
     "raw": "First round of tests with coflow burner",
     "column": "Test Type"
    },
    "test_date": {
     "text": "2018-04-23",
     "quality": "reported",
     "raw": "18113",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-22/efield/12",
   "accession": "PSI-22",
   "investigation": "E-FIELD Flames",
   "type": "session",
   "label": "Day 18130",
   "source_table": "PSI-22_Experimental table_ACME E-FIELD Flames.csv",
   "source_row": 12,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-22",
   "values": {
    "field_polarity": {
     "text": "positive",
     "quality": "reported",
     "raw": "positive",
     "column": "Mesh Polarity"
    },
    "flames_ignited": {
     "min": 13,
     "max": 13,
     "quality": "reported",
     "raw": "13",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "100% CH4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "70%",
     "column": "Fuel Conc"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "The experiment is conducted with gas-fueled flames",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "reported",
     "raw": "First round of tests with coflow burner",
     "column": "Test Type"
    },
    "test_date": {
     "text": "2018-05-10",
     "quality": "reported",
     "raw": "18130",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-22/efield/13",
   "accession": "PSI-22",
   "investigation": "E-FIELD Flames",
   "type": "session",
   "label": "Day 18137",
   "source_table": "PSI-22_Experimental table_ACME E-FIELD Flames.csv",
   "source_row": 13,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-22",
   "values": {
    "field_polarity": {
     "text": "positive",
     "quality": "reported",
     "raw": "positive",
     "column": "Mesh Polarity"
    },
    "flames_ignited": {
     "min": 12,
     "max": 12,
     "quality": "reported",
     "raw": "12",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.8,
     "max": 1,
     "levels": [
      0.8,
      1
     ],
     "quality": "reported",
     "raw": "80%; 100%",
     "column": "Fuel Conc"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "The experiment is conducted with gas-fueled flames",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "coflow jet",
     "quality": "reported",
     "raw": "First round of tests with coflow burner",
     "column": "Test Type"
    },
    "test_date": {
     "text": "2018-05-17",
     "quality": "reported",
     "raw": "18137",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-22/efield/15",
   "accession": "PSI-22",
   "investigation": "E-FIELD Flames",
   "type": "session",
   "label": "Day 18269",
   "source_table": "PSI-22_Experimental table_ACME E-FIELD Flames.csv",
   "source_row": 15,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-22",
   "values": {
    "field_polarity": {
     "text": "negative",
     "quality": "reported",
     "raw": "negative",
     "column": "Mesh Polarity"
    },
    "flames_ignited": {
     "min": 11,
     "max": 11,
     "quality": "reported",
     "raw": "11",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "40% CH4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "40%",
     "column": "Fuel Conc"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "The experiment is conducted with gas-fueled flames",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "gas jet",
     "quality": "reported",
     "raw": "Second round of tests with gas-jet burner",
     "column": "Test Type"
    },
    "test_date": {
     "text": "2018-09-26",
     "quality": "reported",
     "raw": "18269",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-22/efield/16",
   "accession": "PSI-22",
   "investigation": "E-FIELD Flames",
   "type": "session",
   "label": "Day 18274",
   "source_table": "PSI-22_Experimental table_ACME E-FIELD Flames.csv",
   "source_row": 16,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-22",
   "values": {
    "field_polarity": {
     "text": "negative",
     "quality": "reported",
     "raw": "negative",
     "column": "Mesh Polarity"
    },
    "flames_ignited": {
     "min": 11,
     "max": 11,
     "quality": "reported",
     "raw": "11",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "30% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "30%",
     "column": "Fuel Conc"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "The experiment is conducted with gas-fueled flames",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "gas jet",
     "quality": "reported",
     "raw": "Second round of tests with gas-jet burner",
     "column": "Test Type"
    },
    "test_date": {
     "text": "2018-10-01",
     "quality": "reported",
     "raw": "18274",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-22/efield/17",
   "accession": "PSI-22",
   "investigation": "E-FIELD Flames",
   "type": "session",
   "label": "Day 18282",
   "source_table": "PSI-22_Experimental table_ACME E-FIELD Flames.csv",
   "source_row": 17,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-22",
   "values": {
    "field_polarity": {
     "text": "negative",
     "quality": "reported",
     "raw": "negative",
     "column": "Mesh Polarity"
    },
    "flames_ignited": {
     "min": 13,
     "max": 13,
     "quality": "reported",
     "raw": "13",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "100% CH4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.7,
     "max": 1,
     "levels": [
      0.7,
      1
     ],
     "quality": "reported",
     "raw": "70%; 100%",
     "column": "Fuel Conc"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "The experiment is conducted with gas-fueled flames",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "gas jet",
     "quality": "reported",
     "raw": "Second round of tests with gas-jet burner",
     "column": "Test Type"
    },
    "test_date": {
     "text": "2018-10-09",
     "quality": "reported",
     "raw": "18282",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-22/efield/19",
   "accession": "PSI-22",
   "investigation": "E-FIELD Flames",
   "type": "session",
   "label": "Day 18285",
   "source_table": "PSI-22_Experimental table_ACME E-FIELD Flames.csv",
   "source_row": 19,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-22",
   "values": {
    "field_polarity": {
     "text": "negative",
     "quality": "reported",
     "raw": "negative",
     "column": "Mesh Polarity"
    },
    "flames_ignited": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100%",
     "column": "Fuel Conc"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "The experiment is conducted with gas-fueled flames",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "gas jet",
     "quality": "reported",
     "raw": "Second round of tests with gas-jet burner",
     "column": "Test Type"
    },
    "test_date": {
     "text": "2018-10-12",
     "quality": "reported",
     "raw": "18285",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-22/efield/20",
   "accession": "PSI-22",
   "investigation": "E-FIELD Flames",
   "type": "session",
   "label": "Day 18290",
   "source_table": "PSI-22_Experimental table_ACME E-FIELD Flames.csv",
   "source_row": 20,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-22",
   "values": {
    "field_polarity": {
     "text": "negative",
     "quality": "reported",
     "raw": "negative",
     "column": "Mesh Polarity"
    },
    "flames_ignited": {
     "min": 11,
     "max": 11,
     "quality": "reported",
     "raw": "11",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "80%",
     "column": "Fuel Conc"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "The experiment is conducted with gas-fueled flames",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "gas jet",
     "quality": "reported",
     "raw": "Second round of tests with gas-jet burner",
     "column": "Test Type"
    },
    "test_date": {
     "text": "2018-10-17",
     "quality": "reported",
     "raw": "18290",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-22/efield/21",
   "accession": "PSI-22",
   "investigation": "E-FIELD Flames",
   "type": "session",
   "label": "Day 18298",
   "source_table": "PSI-22_Experimental table_ACME E-FIELD Flames.csv",
   "source_row": 21,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-22",
   "values": {
    "field_polarity": {
     "text": "positive",
     "quality": "reported",
     "raw": "positive",
     "column": "Mesh Polarity"
    },
    "flames_ignited": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "40% CH4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "40%",
     "column": "Fuel Conc"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "The experiment is conducted with gas-fueled flames",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "gas jet",
     "quality": "reported",
     "raw": "Second round of tests with gas-jet burner",
     "column": "Test Type"
    },
    "test_date": {
     "text": "2018-10-25",
     "quality": "reported",
     "raw": "18298",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-22/efield/22",
   "accession": "PSI-22",
   "investigation": "E-FIELD Flames",
   "type": "session",
   "label": "Day 18302",
   "source_table": "PSI-22_Experimental table_ACME E-FIELD Flames.csv",
   "source_row": 22,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-22",
   "values": {
    "field_polarity": {
     "text": "positive",
     "quality": "reported",
     "raw": "positive",
     "column": "Mesh Polarity"
    },
    "flames_ignited": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "30% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "30%",
     "column": "Fuel Conc"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "The experiment is conducted with gas-fueled flames",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "gas jet",
     "quality": "reported",
     "raw": "Second round of tests with gas-jet burner",
     "column": "Test Type"
    },
    "test_date": {
     "text": "2018-10-29",
     "quality": "reported",
     "raw": "18302",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-22/efield/23",
   "accession": "PSI-22",
   "investigation": "E-FIELD Flames",
   "type": "session",
   "label": "Day 18312",
   "source_table": "PSI-22_Experimental table_ACME E-FIELD Flames.csv",
   "source_row": 23,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-22",
   "values": {
    "field_polarity": {
     "text": "positive",
     "quality": "reported",
     "raw": "positive",
     "column": "Mesh Polarity"
    },
    "flames_ignited": {
     "min": 13,
     "max": 13,
     "quality": "reported",
     "raw": "13",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "100% CH4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.7,
     "max": 1,
     "levels": [
      0.7,
      1
     ],
     "quality": "reported",
     "raw": "70%; 100%",
     "column": "Fuel Conc"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "The experiment is conducted with gas-fueled flames",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "gas jet",
     "quality": "reported",
     "raw": "Second round of tests with gas-jet burner",
     "column": "Test Type"
    },
    "test_date": {
     "text": "2018-11-08",
     "quality": "reported",
     "raw": "18312",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-22/efield/25",
   "accession": "PSI-22",
   "investigation": "E-FIELD Flames",
   "type": "session",
   "label": "Day 18319",
   "source_table": "PSI-22_Experimental table_ACME E-FIELD Flames.csv",
   "source_row": 25,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-22",
   "values": {
    "field_polarity": {
     "text": "positive",
     "quality": "reported",
     "raw": "positive",
     "column": "Mesh Polarity"
    },
    "flames_ignited": {
     "min": 11,
     "max": 11,
     "quality": "reported",
     "raw": "11",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.25,
     "max": 1,
     "levels": [
      0.25,
      0.5,
      0.8,
      1
     ],
     "quality": "reported",
     "raw": "25%; 50%; 80%; 100%",
     "column": "Fuel Conc"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "The experiment is conducted with gas-fueled flames",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "gas jet",
     "quality": "reported",
     "raw": "Second round of tests with gas-jet burner",
     "column": "Test Type"
    },
    "test_date": {
     "text": "2018-11-15",
     "quality": "reported",
     "raw": "18319",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-22/efield/29",
   "accession": "PSI-22",
   "investigation": "E-FIELD Flames",
   "type": "session",
   "label": "Day 18319",
   "source_table": "PSI-22_Experimental table_ACME E-FIELD Flames.csv",
   "source_row": 29,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-22",
   "values": {
    "field_polarity": {
     "text": "positive",
     "quality": "reported",
     "raw": "positive",
     "column": "Mesh Polarity"
    },
    "flames_ignited": {
     "min": 11,
     "max": 11,
     "quality": "reported",
     "raw": "11",
     "column": "Flames Ignited"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "100% C2H4",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "diluted with nitrogen on a volume basis",
     "evidence_source": "table"
    },
    "fuel_fraction": {
     "min": 0.25,
     "max": 1,
     "levels": [
      0.25,
      0.5,
      0.8,
      1
     ],
     "quality": "reported",
     "raw": "25%; 50%; 80%; 100%",
     "column": "Fuel Conc"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "The experiment is conducted with gas-fueled flames",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "gas jet",
     "quality": "reported",
     "raw": "Second round of tests with gas-jet burner",
     "column": "Test Type"
    },
    "test_date": {
     "text": "2018-11-15",
     "quality": "reported",
     "raw": "18319",
     "column": "Test Day"
    }
   }
  },
  {
   "id": "PSI-23/sflame/1",
   "accession": "PSI-23",
   "investigation": "s-Flame",
   "type": "session",
   "label": "Day 19254",
   "source_table": "PSI-23_Experimental table_ACME s-Flame.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-23",
   "values": {
    "description": {
     "text": "First round of tests with nitrogen-diluted fuel and oxygen",
     "quality": "reported",
     "raw": "First round of tests with nitrogen-diluted fuel and oxygen",
     "column": "Test Type"
    },
    "diluent": {
     "text": "N2",
     "quality": "reported",
     "raw": "~21% O2 with N2",
     "column": "Atmosphere*"
    },
    "flames_ignited": {
     "min": 13,
     "max": 13,
     "quality": "reported",
     "raw": "13",
     "column": "Flames Ignited*"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "50% C2H4 with N2",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "reported",
     "raw": "50% C2H4 with N2",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50% C2H4 with N2",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "reported",
     "raw": "~21% O2 with N2",
     "column": "Atmosphere*"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "context",
     "evidence": "Atmosphere is ~1 atm but pressure increases and O2% drops with vitiation",
     "evidence_source": "table"
    },
    "test_date": {
     "text": "2019-09-11",
     "quality": "reported",
     "raw": "19254",
     "column": "Test Day*"
    }
   }
  },
  {
   "id": "PSI-23/sflame/2",
   "accession": "PSI-23",
   "investigation": "s-Flame",
   "type": "session",
   "label": "Day 19256",
   "source_table": "PSI-23_Experimental table_ACME s-Flame.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-23",
   "values": {
    "description": {
     "text": "First round of tests with nitrogen-diluted fuel and oxygen",
     "quality": "reported",
     "raw": "First round of tests with nitrogen-diluted fuel and oxygen",
     "column": "Test Type"
    },
    "diluent": {
     "text": "N2",
     "quality": "corrected",
     "raw": "~21% O2 with N2",
     "column": "Atmosphere*",
     "note": "The PSI table reads '~21% O2 with N3', a spreadsheet auto-fill artefact; restored to '~21% O2 with N2'."
    },
    "flames_ignited": {
     "min": 16,
     "max": 16,
     "quality": "reported",
     "raw": "16",
     "column": "Flames Ignited*"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "corrected",
     "raw": "50% C2H4 with N2",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '50% C2H4 with N3', a spreadsheet auto-fill artefact; restored to '50% C2H4 with N2'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "corrected",
     "raw": "50% C2H4 with N2",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '50% C2H4 with N3', a spreadsheet auto-fill artefact; restored to '50% C2H4 with N2'."
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "corrected",
     "raw": "50% C2H4 with N2",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '50% C2H4 with N3', a spreadsheet auto-fill artefact; restored to '50% C2H4 with N2'."
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "corrected",
     "raw": "~21% O2 with N2",
     "column": "Atmosphere*",
     "note": "The PSI table reads '~21% O2 with N3', a spreadsheet auto-fill artefact; restored to '~21% O2 with N2'."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "context",
     "evidence": "Atmosphere is ~1 atm but pressure increases and O2% drops with vitiation",
     "evidence_source": "table"
    },
    "test_date": {
     "text": "2019-09-13",
     "quality": "reported",
     "raw": "19256",
     "column": "Test Day*"
    }
   }
  },
  {
   "id": "PSI-23/sflame/3",
   "accession": "PSI-23",
   "investigation": "s-Flame",
   "type": "session",
   "label": "Day 19304",
   "source_table": "PSI-23_Experimental table_ACME s-Flame.csv",
   "source_row": 3,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-23",
   "values": {
    "description": {
     "text": "First round of tests with nitrogen-diluted fuel and oxygen",
     "quality": "reported",
     "raw": "First round of tests with nitrogen-diluted fuel and oxygen",
     "column": "Test Type"
    },
    "diluent": {
     "text": "N2",
     "quality": "corrected",
     "raw": "~21% O2 with N2",
     "column": "Atmosphere*",
     "note": "The PSI table reads '~21% O2 with N4', a spreadsheet auto-fill artefact; restored to '~21% O2 with N2'."
    },
    "flames_ignited": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "Flames Ignited*"
    },
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "45% CH4 with N2",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "reported",
     "raw": "45% CH4 with N2",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "45% CH4 with N2",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "corrected",
     "raw": "~21% O2 with N2",
     "column": "Atmosphere*",
     "note": "The PSI table reads '~21% O2 with N4', a spreadsheet auto-fill artefact; restored to '~21% O2 with N2'."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "context",
     "evidence": "Atmosphere is ~1 atm but pressure increases and O2% drops with vitiation",
     "evidence_source": "table"
    },
    "test_date": {
     "text": "2019-10-31",
     "quality": "reported",
     "raw": "19304",
     "column": "Test Day*"
    }
   }
  },
  {
   "id": "PSI-23/sflame/4",
   "accession": "PSI-23",
   "investigation": "s-Flame",
   "type": "session",
   "label": "Day 19308",
   "source_table": "PSI-23_Experimental table_ACME s-Flame.csv",
   "source_row": 4,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-23",
   "values": {
    "description": {
     "text": "First round of tests with nitrogen-diluted fuel and oxygen",
     "quality": "reported",
     "raw": "First round of tests with nitrogen-diluted fuel and oxygen",
     "column": "Test Type"
    },
    "diluent": {
     "text": "N2",
     "quality": "reported",
     "raw": "~30% O2 with N2",
     "column": "Atmosphere*"
    },
    "flames_ignited": {
     "min": 21,
     "max": 21,
     "quality": "reported",
     "raw": "21",
     "column": "Flames Ignited*"
    },
    "fuel": {
     "text": "methane",
     "quality": "corrected",
     "raw": "45% CH4 with N2",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '45% CH4 with N3', a spreadsheet auto-fill artefact; restored to '45% CH4 with N2'."
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "corrected",
     "raw": "45% CH4 with N2",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '45% CH4 with N3', a spreadsheet auto-fill artefact; restored to '45% CH4 with N2'."
    },
    "fuel_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "corrected",
     "raw": "45% CH4 with N2",
     "column": "Fuel Bottle",
     "note": "The PSI table reads '45% CH4 with N3', a spreadsheet auto-fill artefact; restored to '45% CH4 with N2'."
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "approx": true,
     "quality": "reported",
     "raw": "~30% O2 with N2",
     "column": "Atmosphere*"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "context",
     "evidence": "Atmosphere is ~1 atm but pressure increases and O2% drops with vitiation",
     "evidence_source": "table"
    },
    "test_date": {
     "text": "2019-11-04",
     "quality": "reported",
     "raw": "19308",
     "column": "Test Day*"
    }
   }
  },
  {
   "id": "PSI-23/sflame/5",
   "accession": "PSI-23",
   "investigation": "s-Flame",
   "type": "session",
   "label": "Day 19352",
   "source_table": "PSI-23_Experimental table_ACME s-Flame.csv",
   "source_row": 5,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-23",
   "values": {
    "description": {
     "text": "First round of tests with nitrogen-diluted fuel and oxygen",
     "quality": "reported",
     "raw": "First round of tests with nitrogen-diluted fuel and oxygen",
     "column": "Test Type"
    },
    "diluent": {
     "text": "N2",
     "quality": "reported",
     "raw": "~21% O2 with N2",
     "column": "Atmosphere*"
    },
    "flames_ignited": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Flames Ignited*"
    },
    "fuel": {
     "text": "hydrogen",
     "quality": "reported",
     "raw": "100% H2",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100% H2",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "reported",
     "raw": "~21% O2 with N2",
     "column": "Atmosphere*"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "context",
     "evidence": "Atmosphere is ~1 atm but pressure increases and O2% drops with vitiation",
     "evidence_source": "table"
    },
    "test_date": {
     "text": "2019-12-18",
     "quality": "reported",
     "raw": "19352",
     "column": "Test Day*"
    }
   }
  },
  {
   "id": "PSI-23/sflame/6",
   "accession": "PSI-23",
   "investigation": "s-Flame",
   "type": "session",
   "label": "Day 20006",
   "source_table": "PSI-23_Experimental table_ACME s-Flame.csv",
   "source_row": 6,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-23",
   "values": {
    "description": {
     "text": "First round of tests with nitrogen-diluted fuel and oxygen",
     "quality": "reported",
     "raw": "First round of tests with nitrogen-diluted fuel and oxygen",
     "column": "Test Type"
    },
    "diluent": {
     "text": "N2",
     "quality": "corrected",
     "raw": "~21% O2 with N2",
     "column": "Atmosphere*",
     "note": "The PSI table reads '~21% O2 with N3', a spreadsheet auto-fill artefact; restored to '~21% O2 with N2'."
    },
    "flames_ignited": {
     "min": 17,
     "max": 17,
     "quality": "reported",
     "raw": "17",
     "column": "Flames Ignited*"
    },
    "fuel": {
     "text": "hydrogen / methane",
     "quality": "reported",
     "raw": "44.4% H2 with CH4",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "44.4% H2 with CH4",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "corrected",
     "raw": "~21% O2 with N2",
     "column": "Atmosphere*",
     "note": "The PSI table reads '~21% O2 with N3', a spreadsheet auto-fill artefact; restored to '~21% O2 with N2'."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "context",
     "evidence": "Atmosphere is ~1 atm but pressure increases and O2% drops with vitiation",
     "evidence_source": "table"
    },
    "test_date": {
     "text": "2020-01-06",
     "quality": "reported",
     "raw": "20006",
     "column": "Test Day*"
    }
   }
  },
  {
   "id": "PSI-23/sflame/7",
   "accession": "PSI-23",
   "investigation": "s-Flame",
   "type": "session",
   "label": "Day 20013",
   "source_table": "PSI-23_Experimental table_ACME s-Flame.csv",
   "source_row": 7,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-23",
   "values": {
    "description": {
     "text": "First round of tests with nitrogen-diluted fuel and oxygen",
     "quality": "reported",
     "raw": "First round of tests with nitrogen-diluted fuel and oxygen",
     "column": "Test Type"
    },
    "diluent": {
     "text": "N2",
     "quality": "corrected",
     "raw": "~21% O2 with N2",
     "column": "Atmosphere*",
     "note": "The PSI table reads '~21% O2 with N4', a spreadsheet auto-fill artefact; restored to '~21% O2 with N2'."
    },
    "flames_ignited": {
     "min": 22,
     "max": 22,
     "quality": "reported",
     "raw": "22",
     "column": "Flames Ignited*"
    },
    "fuel": {
     "text": "hydrogen / methane",
     "quality": "reported",
     "raw": "66.7% H2 with CH4",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "66.7% H2 with CH4",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "corrected",
     "raw": "~21% O2 with N2",
     "column": "Atmosphere*",
     "note": "The PSI table reads '~21% O2 with N4', a spreadsheet auto-fill artefact; restored to '~21% O2 with N2'."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "context",
     "evidence": "Atmosphere is ~1 atm but pressure increases and O2% drops with vitiation",
     "evidence_source": "table"
    },
    "test_date": {
     "text": "2020-01-13",
     "quality": "reported",
     "raw": "20013",
     "column": "Test Day*"
    }
   }
  },
  {
   "id": "PSI-23/sflame/8",
   "accession": "PSI-23",
   "investigation": "s-Flame",
   "type": "session",
   "label": "Day 20024",
   "source_table": "PSI-23_Experimental table_ACME s-Flame.csv",
   "source_row": 8,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-23",
   "values": {
    "description": {
     "text": "First round of tests with nitrogen-diluted fuel and oxygen",
     "quality": "reported",
     "raw": "First round of tests with nitrogen-diluted fuel and oxygen",
     "column": "Test Type"
    },
    "diluent": {
     "text": "N2",
     "quality": "corrected",
     "raw": "~21% O2 with N2",
     "column": "Atmosphere*",
     "note": "The PSI table reads '~21% O2 with N5', a spreadsheet auto-fill artefact; restored to '~21% O2 with N2'."
    },
    "flames_ignited": {
     "min": 16,
     "max": 16,
     "quality": "reported",
     "raw": "16",
     "column": "Flames Ignited*"
    },
    "fuel": {
     "text": "hydrogen",
     "quality": "reported",
     "raw": "100% H2",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "100% H2",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "corrected",
     "raw": "~21% O2 with N2",
     "column": "Atmosphere*",
     "note": "The PSI table reads '~21% O2 with N5', a spreadsheet auto-fill artefact; restored to '~21% O2 with N2'."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "context",
     "evidence": "Atmosphere is ~1 atm but pressure increases and O2% drops with vitiation",
     "evidence_source": "table"
    },
    "test_date": {
     "text": "2020-01-24",
     "quality": "reported",
     "raw": "20024",
     "column": "Test Day*"
    }
   }
  },
  {
   "id": "PSI-23/sflame/9",
   "accession": "PSI-23",
   "investigation": "s-Flame",
   "type": "session",
   "label": "Day 20029",
   "source_table": "PSI-23_Experimental table_ACME s-Flame.csv",
   "source_row": 9,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-23",
   "values": {
    "description": {
     "text": "First round of tests with nitrogen-diluted fuel and oxygen",
     "quality": "reported",
     "raw": "First round of tests with nitrogen-diluted fuel and oxygen",
     "column": "Test Type"
    },
    "diluent": {
     "text": "N2",
     "quality": "corrected",
     "raw": "~21% O2 with N2",
     "column": "Atmosphere*",
     "note": "The PSI table reads '~21% O2 with N6', a spreadsheet auto-fill artefact; restored to '~21% O2 with N2'."
    },
    "flames_ignited": {
     "min": 21,
     "max": 21,
     "quality": "reported",
     "raw": "21",
     "column": "Flames Ignited*"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "50% C2H4 with N2",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "N2",
     "quality": "reported",
     "raw": "50% C2H4 with N2",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "50% C2H4 with N2",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "corrected",
     "raw": "~21% O2 with N2",
     "column": "Atmosphere*",
     "note": "The PSI table reads '~21% O2 with N6', a spreadsheet auto-fill artefact; restored to '~21% O2 with N2'."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "context",
     "evidence": "Atmosphere is ~1 atm but pressure increases and O2% drops with vitiation",
     "evidence_source": "table"
    },
    "test_date": {
     "text": "2020-01-29",
     "quality": "reported",
     "raw": "20029",
     "column": "Test Day*"
    }
   }
  },
  {
   "id": "PSI-23/sflame/10",
   "accession": "PSI-23",
   "investigation": "s-Flame",
   "type": "session",
   "label": "Day 20132",
   "source_table": "PSI-23_Experimental table_ACME s-Flame.csv",
   "source_row": 10,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-23",
   "values": {
    "description": {
     "text": "First round of tests with nitrogen-diluted fuel and oxygen",
     "quality": "reported",
     "raw": "First round of tests with nitrogen-diluted fuel and oxygen",
     "column": "Test Type"
    },
    "diluent": {
     "text": "He",
     "quality": "reported",
     "raw": "~21% O2 with He",
     "column": "Atmosphere*"
    },
    "flames_ignited": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "7",
     "column": "Flames Ignited*"
    },
    "fuel": {
     "text": "hydrogen / methane",
     "quality": "reported",
     "raw": "25% H2, 20% CH4, with He",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "He",
     "quality": "reported",
     "raw": "25% H2, 20% CH4, with He",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "25% H2, 20% CH4, with He",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "reported",
     "raw": "~21% O2 with He",
     "column": "Atmosphere*"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "context",
     "evidence": "Atmosphere is ~1 atm but pressure increases and O2% drops with vitiation",
     "evidence_source": "table"
    },
    "test_date": {
     "text": "2020-05-11",
     "quality": "reported",
     "raw": "20132",
     "column": "Test Day*"
    }
   }
  },
  {
   "id": "PSI-23/sflame/11",
   "accession": "PSI-23",
   "investigation": "s-Flame",
   "type": "session",
   "label": "Day 20136",
   "source_table": "PSI-23_Experimental table_ACME s-Flame.csv",
   "source_row": 11,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-23",
   "values": {
    "description": {
     "text": "Second round of tests with helium-diluted fuel and oxygen",
     "quality": "reported",
     "raw": "Second round of tests with helium-diluted fuel and oxygen",
     "column": "Test Type"
    },
    "diluent": {
     "text": "He",
     "quality": "reported",
     "raw": "~21% O2 with He",
     "column": "Atmosphere*"
    },
    "flames_ignited": {
     "min": 11,
     "max": 11,
     "quality": "reported",
     "raw": "11",
     "column": "Flames Ignited*"
    },
    "fuel": {
     "text": "hydrogen / methane",
     "quality": "reported",
     "raw": "20% H2, 25% CH4, with He",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "He",
     "quality": "reported",
     "raw": "20% H2, 25% CH4, with He",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "20% H2, 25% CH4, with He",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "approx": true,
     "quality": "reported",
     "raw": "~21% O2 with He",
     "column": "Atmosphere*"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "context",
     "evidence": "Atmosphere is ~1 atm but pressure increases and O2% drops with vitiation",
     "evidence_source": "table"
    },
    "test_date": {
     "text": "2020-05-15",
     "quality": "reported",
     "raw": "20136",
     "column": "Test Day*"
    }
   }
  },
  {
   "id": "PSI-23/sflame/12",
   "accession": "PSI-23",
   "investigation": "s-Flame",
   "type": "session",
   "label": "Day 20142",
   "source_table": "PSI-23_Experimental table_ACME s-Flame.csv",
   "source_row": 12,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-23",
   "values": {
    "description": {
     "text": "Second round of tests with helium-diluted fuel and oxygen",
     "quality": "reported",
     "raw": "Second round of tests with helium-diluted fuel and oxygen",
     "column": "Test Type"
    },
    "diluent": {
     "text": "He",
     "quality": "reported",
     "raw": "~30% O2 with He",
     "column": "Atmosphere*"
    },
    "flames_ignited": {
     "min": 17,
     "max": 17,
     "quality": "reported",
     "raw": "17",
     "column": "Flames Ignited*"
    },
    "fuel": {
     "text": "hydrogen / methane",
     "quality": "reported",
     "raw": "30% H2, 15% CH4, with He",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "He",
     "quality": "reported",
     "raw": "30% H2, 15% CH4, with He",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "30% H2, 15% CH4, with He",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "approx": true,
     "quality": "reported",
     "raw": "~30% O2 with He",
     "column": "Atmosphere*"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "context",
     "evidence": "Atmosphere is ~1 atm but pressure increases and O2% drops with vitiation",
     "evidence_source": "table"
    },
    "test_date": {
     "text": "2020-05-21",
     "quality": "reported",
     "raw": "20142",
     "column": "Test Day*"
    }
   }
  },
  {
   "id": "PSI-23/sflame/13",
   "accession": "PSI-23",
   "investigation": "s-Flame",
   "type": "session",
   "label": "Day 20155",
   "source_table": "PSI-23_Experimental table_ACME s-Flame.csv",
   "source_row": 13,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-23",
   "values": {
    "description": {
     "text": "Second round of tests with helium-diluted fuel and oxygen",
     "quality": "reported",
     "raw": "Second round of tests with helium-diluted fuel and oxygen",
     "column": "Test Type"
    },
    "diluent": {
     "text": "He",
     "quality": "reported",
     "raw": "~30% and ~21% O2 with He",
     "column": "Atmosphere*"
    },
    "flames_ignited": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "Flames Ignited*"
    },
    "fuel": {
     "text": "hydrogen",
     "quality": "reported",
     "raw": "45% H2 with He",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "He",
     "quality": "reported",
     "raw": "45% H2 with He",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "45% H2 with He",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.3,
     "levels": [
      0.21,
      0.3
     ],
     "approx": true,
     "quality": "reported",
     "raw": "~30% and ~21% O2 with He",
     "column": "Atmosphere*"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "context",
     "evidence": "Atmosphere is ~1 atm but pressure increases and O2% drops with vitiation",
     "evidence_source": "table"
    },
    "test_date": {
     "text": "2020-06-03",
     "quality": "reported",
     "raw": "20155",
     "column": "Test Day*"
    }
   }
  },
  {
   "id": "PSI-23/sflame/14",
   "accession": "PSI-23",
   "investigation": "s-Flame",
   "type": "session",
   "label": "Day 20160",
   "source_table": "PSI-23_Experimental table_ACME s-Flame.csv",
   "source_row": 14,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-23",
   "values": {
    "description": {
     "text": "Second round of tests with helium-diluted fuel and oxygen",
     "quality": "reported",
     "raw": "Second round of tests with helium-diluted fuel and oxygen",
     "column": "Test Type"
    },
    "diluent": {
     "text": "He",
     "quality": "reported",
     "raw": "~30% and ~21% O2 with He",
     "column": "Atmosphere*"
    },
    "flames_ignited": {
     "min": 12,
     "max": 12,
     "quality": "reported",
     "raw": "12",
     "column": "Flames Ignited*"
    },
    "fuel": {
     "text": "methane",
     "quality": "reported",
     "raw": "45% CH4 with He",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "He",
     "quality": "reported",
     "raw": "45% CH4 with He",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "45% CH4 with He",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.3,
     "levels": [
      0.21,
      0.3
     ],
     "approx": true,
     "quality": "reported",
     "raw": "~30% and ~21% O2 with He",
     "column": "Atmosphere*"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "context",
     "evidence": "Atmosphere is ~1 atm but pressure increases and O2% drops with vitiation",
     "evidence_source": "table"
    },
    "test_date": {
     "text": "2020-06-08",
     "quality": "reported",
     "raw": "20160",
     "column": "Test Day*"
    }
   }
  },
  {
   "id": "PSI-23/sflame/15",
   "accession": "PSI-23",
   "investigation": "s-Flame",
   "type": "session",
   "label": "Day 20164",
   "source_table": "PSI-23_Experimental table_ACME s-Flame.csv",
   "source_row": 15,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-23",
   "values": {
    "description": {
     "text": "Second round of tests with helium-diluted fuel and oxygen",
     "quality": "reported",
     "raw": "Second round of tests with helium-diluted fuel and oxygen",
     "column": "Test Type"
    },
    "diluent": {
     "text": "He",
     "quality": "reported",
     "raw": "~30% O2 with He",
     "column": "Atmosphere*"
    },
    "flames_ignited": {
     "min": 11,
     "max": 11,
     "quality": "reported",
     "raw": "11",
     "column": "Flames Ignited*"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "20% C2H4 with He",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "He",
     "quality": "reported",
     "raw": "20% C2H4 with He",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "20% C2H4 with He",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "approx": true,
     "quality": "reported",
     "raw": "~30% O2 with He",
     "column": "Atmosphere*"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "context",
     "evidence": "Atmosphere is ~1 atm but pressure increases and O2% drops with vitiation",
     "evidence_source": "table"
    },
    "test_date": {
     "text": "2020-06-12",
     "quality": "reported",
     "raw": "20164",
     "column": "Test Day*"
    }
   }
  },
  {
   "id": "PSI-23/sflame/16",
   "accession": "PSI-23",
   "investigation": "s-Flame",
   "type": "session",
   "label": "Day 20170",
   "source_table": "PSI-23_Experimental table_ACME s-Flame.csv",
   "source_row": 16,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-23",
   "values": {
    "description": {
     "text": "Second round of tests with helium-diluted fuel and oxygen",
     "quality": "reported",
     "raw": "Second round of tests with helium-diluted fuel and oxygen",
     "column": "Test Type"
    },
    "diluent": {
     "text": "He",
     "quality": "reported",
     "raw": "~30% and ~21% O2 with He",
     "column": "Atmosphere*"
    },
    "flames_ignited": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "20",
     "column": "Flames Ignited*"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "25% C2H4 with He",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "He",
     "quality": "reported",
     "raw": "25% C2H4 with He",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "25% C2H4 with He",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.3,
     "levels": [
      0.21,
      0.3
     ],
     "approx": true,
     "quality": "reported",
     "raw": "~30% and ~21% O2 with He",
     "column": "Atmosphere*"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "context",
     "evidence": "Atmosphere is ~1 atm but pressure increases and O2% drops with vitiation",
     "evidence_source": "table"
    },
    "test_date": {
     "text": "2020-06-18",
     "quality": "reported",
     "raw": "20170",
     "column": "Test Day*"
    }
   }
  },
  {
   "id": "PSI-23/sflame/17",
   "accession": "PSI-23",
   "investigation": "s-Flame",
   "type": "session",
   "label": "Day 20176",
   "source_table": "PSI-23_Experimental table_ACME s-Flame.csv",
   "source_row": 17,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-23",
   "values": {
    "description": {
     "text": "Second round of tests with helium-diluted fuel and oxygen",
     "quality": "reported",
     "raw": "Second round of tests with helium-diluted fuel and oxygen",
     "column": "Test Type"
    },
    "diluent": {
     "text": "He",
     "quality": "reported",
     "raw": "~30% and ~21% O2 with He",
     "column": "Atmosphere*"
    },
    "flames_ignited": {
     "min": 23,
     "max": 23,
     "quality": "reported",
     "raw": "23",
     "column": "Flames Ignited*"
    },
    "fuel": {
     "text": "ethylene",
     "quality": "reported",
     "raw": "30% C2H4 with He",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "He",
     "quality": "reported",
     "raw": "30% C2H4 with He",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "30% C2H4 with He",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.3,
     "levels": [
      0.21,
      0.3
     ],
     "approx": true,
     "quality": "reported",
     "raw": "~30% and ~21% O2 with He",
     "column": "Atmosphere*"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "context",
     "evidence": "Atmosphere is ~1 atm but pressure increases and O2% drops with vitiation",
     "evidence_source": "table"
    },
    "test_date": {
     "text": "2020-06-24",
     "quality": "reported",
     "raw": "20176",
     "column": "Test Day*"
    }
   }
  },
  {
   "id": "PSI-23/sflame/18",
   "accession": "PSI-23",
   "investigation": "s-Flame",
   "type": "session",
   "label": "Day 20190",
   "source_table": "PSI-23_Experimental table_ACME s-Flame.csv",
   "source_row": 18,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-23",
   "values": {
    "description": {
     "text": "Second round of tests with helium-diluted fuel and oxygen",
     "quality": "reported",
     "raw": "Second round of tests with helium-diluted fuel and oxygen",
     "column": "Test Type"
    },
    "diluent": {
     "text": "He",
     "quality": "reported",
     "raw": "~30% and ~21% O2 with He",
     "column": "Atmosphere*"
    },
    "flames_ignited": {
     "min": 21,
     "max": 21,
     "quality": "reported",
     "raw": "21",
     "column": "Flames Ignited*"
    },
    "fuel": {
     "text": "hydrogen",
     "quality": "reported",
     "raw": "35% H2 with He",
     "column": "Fuel Bottle"
    },
    "fuel_diluent": {
     "text": "He",
     "quality": "reported",
     "raw": "35% H2 with He",
     "column": "Fuel Bottle"
    },
    "fuel_fraction": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "35% H2 with He",
     "column": "Fuel Bottle"
    },
    "fuel_phase": {
     "text": "gas",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "spherical burner",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "issued into an oxidizing environment through a spherical porous burner",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.3,
     "levels": [
      0.21,
      0.3
     ],
     "approx": true,
     "quality": "reported",
     "raw": "~30% and ~21% O2 with He",
     "column": "Atmosphere*"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "context",
     "evidence": "Atmosphere is ~1 atm but pressure increases and O2% drops with vitiation",
     "evidence_source": "table"
    },
    "test_date": {
     "text": "2020-07-08",
     "quality": "reported",
     "raw": "20190",
     "column": "Test Day*"
    }
   }
  },
  {
   "id": "PSI-25/bass2/1",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B1",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0044,
     "max": 0.0044,
     "quality": "reported",
     "raw": "0.44",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "6",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "turned flow off after spread halfway; flame extinguished very quickly",
     "column": "p. 111, printed page 103, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 111, printed page 103, Table A.1. NASA's observation says the crew turned the air flow off to end the burn.",
     "evidence": "Ignited very quickly, turned flow off after spread halfway; flame extinguished very quickly; and sooty with blue leading edge",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 111, printed page 103, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 111, printed page 103, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B1 147 100-µm PMMA film, 2 cm wide Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "100 micron PMMA film 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "100 micron PMMA film 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.222,
     "max": 0.222,
     "quality": "reported",
     "raw": "22.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.222,
     "max": 0.222,
     "quality": "reported",
     "raw": "22.2",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 0.1,
     "max": 0.1,
     "quality": "reported",
     "raw": "100 micron PMMA film 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "100 micron PMMA film 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-02-19",
     "quality": "reported",
     "raw": "2/19/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/2",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B2",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B2 155 200-µm PMMA film, 2 cm wide Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "200 micron PMMA film 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "200 micron PMMA film 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.222,
     "max": 0.222,
     "quality": "reported",
     "raw": "22.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.016,
     "max": 0.016,
     "outside_expected_range": true,
     "quality": "reported",
     "raw": "1.6",
     "column": "Calibrated final O2 % by vol",
     "note": "Outside the expected range; kept exactly as published."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "200 micron PMMA film 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "200 micron PMMA film 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-02-19",
     "quality": "reported",
     "raw": "2/19/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/3",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B3",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 3,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0049,
     "max": 0.0049,
     "quality": "reported",
     "raw": "0.49",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 19,
     "max": 19,
     "quality": "reported",
     "raw": "19",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B3 148 100-µm film, 2 cm wide Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "100 micron film 2 cm wide",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "100 micron film 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "lower flow flames much more blue overall",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "Probably 20.6 O2 to start; lower flow flames much more blue overall; still some soot though",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.222,
     "max": 0.222,
     "quality": "reported",
     "raw": "22.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.218,
     "max": 0.218,
     "quality": "reported",
     "raw": "21.8",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 99.2,
     "max": 99.5,
     "quality": "reported",
     "raw": "99.2 to 99.5 kPa",
     "column": "p. 46, printed page 38, section 2 (Bhattacharjee)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 46, printed page 38, section 2 (Bhattacharjee). Bhattacharjee's chapter states this range for 'the tests reported' without listing them; Figure 2.20 of the same chapter (p. 49) names B03 as a BASS-II test, so only the four tests it names are claimed. It replaces a value that had been assumed.",
     "evidence": "The total pressure is also monitored, which varied from 99.2 to 99.5 kPa in the tests reported.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_thickness_mm": {
     "min": 0.1,
     "max": 0.1,
     "quality": "reported",
     "raw": "100 micron film 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "100 micron film 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-02-19",
     "quality": "reported",
     "raw": "2/19/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/4",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B4",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 4,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0051,
     "max": 0.0051,
     "quality": "reported",
     "raw": "0.51",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B4 159 300-µm PMMA film, 2 cm wide Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "300 micron PMMA film 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "300 micron PMMA film 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.222,
     "max": 0.222,
     "quality": "reported",
     "raw": "22.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.222,
     "max": 0.222,
     "quality": "reported",
     "raw": "22.2",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 99.2,
     "max": 99.5,
     "quality": "reported",
     "raw": "99.2 to 99.5 kPa",
     "column": "p. 46, printed page 38, section 2 (Bhattacharjee)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 46, printed page 38, section 2 (Bhattacharjee). Bhattacharjee's chapter states this range for 'the tests reported' without listing them; Figure 2.20 of the same chapter (p. 49) names B4 as a BASS-II test, so only the four tests it names are claimed. It replaces a value that had been assumed.",
     "evidence": "The total pressure is also monitored, which varied from 99.2 to 99.5 kPa in the tests reported.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_thickness_mm": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "300 micron PMMA film 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "300 micron PMMA film 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-02-19",
     "quality": "reported",
     "raw": "2/19/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/5",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B5",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 5,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0043,
     "max": 0.0043,
     "quality": "reported",
     "raw": "0.43",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 12,
     "max": 12,
     "quality": "reported",
     "raw": "12",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B5 156 200 µm 2 cm wide Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "200 micron 2 cm wide",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "200 micron 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.222,
     "max": 0.222,
     "quality": "reported",
     "raw": "22.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.219,
     "max": 0.219,
     "quality": "reported",
     "raw": "21.9",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "200 micron 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "200 micron 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-02-19",
     "quality": "reported",
     "raw": "2/19/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/6",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B6",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 6,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0041,
     "max": 0.0041,
     "quality": "reported",
     "raw": "0.41",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "complete burnout",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1.",
     "evidence": "Steady burning at 3 and 5 cm/s, did not reach 10 cm/s before end of sample, complete burnout, HCl –>0.3",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B6 153m 2-cm, 0.1-mm PMMA film Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 3,
     "max": 10,
     "levels": [
      3,
      5,
      10
     ],
     "approx": true,
     "quality": "reported",
     "raw": "3 5 approaching 10",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: approaching.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "2 cm 0.1 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "2 cm 0.1 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "21",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.209,
     "max": 0.209,
     "quality": "reported",
     "raw": "20.9",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 0.1,
     "max": 0.1,
     "quality": "reported",
     "raw": "2 cm 0.1 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm 0.1 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-07",
     "quality": "reported",
     "raw": "7/7/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/7",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B7",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 7,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0051,
     "max": 0.0051,
     "quality": "reported",
     "raw": "0.51",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 17,
     "max": 17,
     "quality": "reported",
     "raw": "17",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B7 161 400-µm film, 2 cm wide Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "400 micron film 2 cm wide",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "400 micron film 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.222,
     "max": 0.222,
     "quality": "reported",
     "raw": "22.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.221,
     "max": 0.221,
     "quality": "reported",
     "raw": "22.1",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "400 micron film 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "400 micron film 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-02-19",
     "quality": "reported",
     "raw": "2/19/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/8",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B8",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 8,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0058,
     "max": 0.0058,
     "quality": "reported",
     "raw": "0.58",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 131,
     "max": 131,
     "quality": "reported",
     "raw": "131",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B8 157m 2-cm, 0.2-mm PMMA film Integral 0 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 10,
     "max": 10,
     "approx": true,
     "quality": "reported",
     "raw": "10 max",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: max.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "2 cm 0.2 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "2 cm 0.2 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Spread at 10 cm/s",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "Spread at 10 cm/s, did not blowoff",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "21",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.205,
     "max": 0.205,
     "quality": "reported",
     "raw": "20.5",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "2 cm 0.2 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm 0.2 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-07",
     "quality": "reported",
     "raw": "7/7/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/9",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B9",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 9,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0035,
     "max": 0.0035,
     "quality": "reported",
     "raw": "0.35",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "extinguished at 0.35",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1.",
     "evidence": "Steady burning at 2 cm/s, extinguished at 0.35",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B9 154m 2-cm, 0.1-mm PMMA film Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 2,
     "max": 2,
     "approx": true,
     "quality": "reported",
     "raw": "2 <1",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: <1.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "2 cm 0.1 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "2 cm 0.1 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "21",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.209,
     "max": 0.209,
     "quality": "reported",
     "raw": "20.9",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 0.1,
     "max": 0.1,
     "quality": "reported",
     "raw": "2 cm 0.1 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm 0.1 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-07",
     "quality": "reported",
     "raw": "7/7/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/10",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B10",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 10,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0044,
     "max": 0.0044,
     "quality": "reported",
     "raw": "0.44",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 23,
     "max": 23,
     "quality": "reported",
     "raw": "23",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "extinguished at pot 0.35",
     "column": "p. 111, printed page 103, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 111, printed page 103, Table A.1.",
     "evidence": "Multiple velocities for steady spread, extinguished at pot 0.35",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 111, printed page 103, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 111, printed page 103, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B10 173m 1-cm, 0.2- mm PMMA film Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 1,
     "max": 5,
     "levels": [
      1,
      2,
      3,
      4,
      5
     ],
     "quality": "reported",
     "raw": "5 4 3 2 1",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "1 cm 0.2 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "1 cm 0.2 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "21",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.208,
     "max": 0.208,
     "quality": "reported",
     "raw": "20.8",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "1 cm 0.2 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 cm 0.2 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-07",
     "quality": "reported",
     "raw": "7/7/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/11",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B11",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 11,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0047,
     "max": 0.0047,
     "quality": "reported",
     "raw": "0.47",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 46,
     "max": 46,
     "quality": "reported",
     "raw": "46",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "extinguished at pot 0.35",
     "column": "p. 111, printed page 103, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 111, printed page 103, Table A.1.",
     "evidence": "Multiple velocities for steady spread, extinguished at pot 0.35",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 111, printed page 103, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 111, printed page 103, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B11 158m 2-cm, 0.2- mm PMMA film Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 1,
     "max": 5,
     "levels": [
      1,
      3,
      5
     ],
     "approx": true,
     "quality": "reported",
     "raw": "5 3 1 <1",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: <1.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "2 cm 0.2 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "2 cm 0.2 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "21",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.207,
     "max": 0.207,
     "quality": "reported",
     "raw": "20.7",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 99.2,
     "max": 99.5,
     "quality": "reported",
     "raw": "99.2 to 99.5 kPa",
     "column": "p. 46, printed page 38, section 2 (Bhattacharjee)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 46, printed page 38, section 2 (Bhattacharjee). Bhattacharjee's chapter states this range for 'the tests reported' without listing them; Figure 2.20 of the same chapter (p. 49) names B11 as a BASS-II test, so only the four tests it names are claimed. It replaces a value that had been assumed.",
     "evidence": "The total pressure is also monitored, which varied from 99.2 to 99.5 kPa in the tests reported.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_thickness_mm": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "2 cm 0.2 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm 0.2 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-07",
     "quality": "reported",
     "raw": "7/7/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/12",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B12",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 12,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0056,
     "max": 0.0056,
     "quality": "reported",
     "raw": "0.56",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 33,
     "max": 33,
     "quality": "reported",
     "raw": "33",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 111, printed page 103, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 111, printed page 103, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B12 160 300-µm film, 2 cm wide Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "300 micron film 2 cm wide",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "300 micron film 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.222,
     "max": 0.222,
     "quality": "reported",
     "raw": "22.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.221,
     "max": 0.221,
     "quality": "reported",
     "raw": "22.1",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "300 micron film 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "300 micron film 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-02-19",
     "quality": "reported",
     "raw": "2/19/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/13",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B13",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 13,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0065,
     "max": 0.0065,
     "quality": "reported",
     "raw": "0.65",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 61,
     "max": 61,
     "quality": "reported",
     "raw": "61",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "extinguished at pot 0.35",
     "column": "p. 111, printed page 103, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 111, printed page 103, Table A.1.",
     "evidence": "Multiple velocities for steady spread, extinguished at pot 0.35",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 111, printed page 103, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 111, printed page 103, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B13 162m 2-cm, 0.4- mm thick film Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 1,
     "max": 10,
     "levels": [
      1,
      2,
      3,
      4,
      5,
      10
     ],
     "quality": "reported",
     "raw": "10 5 4 3 2 1",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm 0.4 mm thick film",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "2 cm 0.4 mm thick film",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "21",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.205,
     "max": 0.205,
     "quality": "reported",
     "raw": "20.5",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 99.2,
     "max": 99.5,
     "quality": "reported",
     "raw": "99.2 to 99.5 kPa",
     "column": "p. 46, printed page 38, section 2 (Bhattacharjee)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 46, printed page 38, section 2 (Bhattacharjee). Bhattacharjee's chapter states this range for 'the tests reported' without listing them; Figure 2.20 of the same chapter (p. 49) names B13 as a BASS-II test, so only the four tests it names are claimed. It replaces a value that had been assumed.",
     "evidence": "The total pressure is also monitored, which varied from 99.2 to 99.5 kPa in the tests reported.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_thickness_mm": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "2 cm 0.4 mm thick film",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm 0.4 mm thick film",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-07",
     "quality": "reported",
     "raw": "7/7/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/14",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B14",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 14,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "only brief ignition, flame extinguished",
     "column": "p. 111, printed page 103, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 111, printed page 103, Table A.1. NASA's file PSI-25_Experimental table_BASS-II.csv gives the same. NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same.",
     "evidence": "HCl O, only brief ignition, flame extinguished",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 111, printed page 103, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 111, printed page 103, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B14 174m 1-cm-wide, 200-µm- thick PMMA Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 2,
     "max": 5,
     "levels": [
      2,
      3,
      5
     ],
     "approx": true,
     "quality": "reported",
     "raw": "5 3 2 ext",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: ext.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "1 cm wide 200 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "1 cm wide 200 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "15",
     "column": "Calibrated initial O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "1 cm wide 200 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 cm wide 200 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-02",
     "quality": "reported",
     "raw": "7/2/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/15",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B15",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 15,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0043,
     "max": 0.0043,
     "quality": "reported",
     "raw": "0.43",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 22,
     "max": 22,
     "quality": "reported",
     "raw": "22",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 111, printed page 103, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 111, printed page 103, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B15 149m 2-cm, 0.1- mm PMMA film Integral 0 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 10,
     "max": 10,
     "approx": true,
     "quality": "reported",
     "raw": "10 max",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: max.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "2 cm 0.1 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "2 cm 0.1 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Spread at 10 cm/s",
     "column": "p. 111, printed page 103, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 111, printed page 103, Table A.1. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "Spread at 10 cm/s, did not blowoff",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "21",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.208,
     "max": 0.208,
     "quality": "reported",
     "raw": "20.8",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 0.1,
     "max": 0.1,
     "quality": "reported",
     "raw": "2 cm 0.1 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm 0.1 mm PMMA film",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-07",
     "quality": "reported",
     "raw": "7/7/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/16",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B16",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 16,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0051,
     "max": 0.0051,
     "quality": "reported",
     "raw": "0.51",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 119,
     "max": 119,
     "quality": "reported",
     "raw": "119",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "flame quenched after prolonged burn at 0.4 pot",
     "column": "p. 111, printed page 103, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 111, printed page 103, Table A.1.",
     "evidence": "HCl 1.1 > 1.3; flame quenched after prolonged burn at 0.4 pot, one-sided flame; spread to top side and quenched immediately; did igniter wire affect top flame?",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 111, printed page 103, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 111, printed page 103, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B16 150m 2-cm 100- µm-thick PMMA Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 3,
     "max": 3,
     "approx": true,
     "quality": "reported",
     "raw": "3 0.5 pot 0.4 pot",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "2 cm 100 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "2 cm 100 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.173,
     "max": 0.173,
     "quality": "reported",
     "raw": "17.3",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.172,
     "max": 0.172,
     "quality": "reported",
     "raw": "17.2",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 0.1,
     "max": 0.1,
     "quality": "reported",
     "raw": "2 cm 100 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm 100 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-02",
     "quality": "reported",
     "raw": "7/2/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/17",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B17",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 17,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0034,
     "max": 0.0034,
     "quality": "reported",
     "raw": "0.34",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 47,
     "max": 47,
     "quality": "reported",
     "raw": "47",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "extinguished just as we reached a pot of 0.4",
     "column": "p. 111, printed page 103, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 111, printed page 103, Table A.1.",
     "evidence": "Burned steadily at higher flows, extinguished just as we reached a pot of 0.4; vapor jetting more on bottom, possibly because of sample tilted slightly to flow?",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 111, printed page 103, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 111, printed page 103, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B17 175m 1-cm-wide, 200-µm- thick PMMA Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 3,
     "max": 5,
     "levels": [
      3,
      5
     ],
     "approx": true,
     "quality": "reported",
     "raw": "5 3 pot 0.4",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "1 cm wide 200 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "1 cm wide 200 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.175,
     "max": 0.175,
     "quality": "reported",
     "raw": "17.5",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.174,
     "max": 0.174,
     "quality": "reported",
     "raw": "17.4",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "1 cm wide 200 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 cm wide 200 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-02",
     "quality": "reported",
     "raw": "7/2/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/18",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B18",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 18,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0042,
     "max": 0.0042,
     "quality": "reported",
     "raw": "0.42",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 78,
     "max": 78,
     "quality": "reported",
     "raw": "78",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "blowoff",
     "quality": "reported",
     "raw": "flame blew out at a fan pot of 7.0",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1. NASA's file PSI-25_Experimental table_BASS-II.csv gives the same. NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same.",
     "evidence": "HCl 0.6 > 0.9, flame blew out at a fan pot of 7.0",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B18 176m 1-cm-wide, 200-µm- thick PMMA Integral 0 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 10,
     "max": 10,
     "approx": true,
     "quality": "reported",
     "raw": "10 blowoff",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: blowoff.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "1 cm wide 200 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "1 cm wide 200 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.174,
     "max": 0.174,
     "quality": "reported",
     "raw": "17.4",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.174,
     "max": 0.174,
     "quality": "reported",
     "raw": "17.4",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "1 cm wide 200 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 cm wide 200 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-02",
     "quality": "reported",
     "raw": "7/2/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/19",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B19",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 19,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0057,
     "max": 0.0057,
     "quality": "reported",
     "raw": "0.57",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 131,
     "max": 131,
     "quality": "reported",
     "raw": "131",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "blowoff",
     "quality": "reported",
     "raw": "flame blew out at a pot of 6.0",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1. NASA's file PSI-25_Experimental table_BASS-II.csv gives the same. NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same.",
     "evidence": "HCl 1.3 > 1.4; flame blew out at a pot of 6.0",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B19 151m 2-cm, 100- µm-thick PMMA Integral 0 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 10,
     "max": 10,
     "approx": true,
     "quality": "reported",
     "raw": "10 blowoff",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: blowoff.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "2 cm 100 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "2 cm 100 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.173,
     "max": 0.173,
     "quality": "reported",
     "raw": "17.3",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.172,
     "max": 0.172,
     "quality": "reported",
     "raw": "17.2",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 0.1,
     "max": 0.1,
     "quality": "reported",
     "raw": "2 cm 100 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm 100 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-02",
     "quality": "reported",
     "raw": "7/2/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/20",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B20",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 20,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0047,
     "max": 0.0047,
     "quality": "reported",
     "raw": "0.47",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 103,
     "max": 103,
     "quality": "reported",
     "raw": "103",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "flame burned entire sample",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1.",
     "evidence": "HCl 0.9 > 1.1; flame burned entire sample",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B20 152m 2-cm, 100- µm-thick PMMA Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 3,
     "max": 5,
     "levels": [
      3,
      5
     ],
     "approx": true,
     "quality": "reported",
     "raw": "5 3 pot 0.5",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "2 cm 100 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "2 cm 100 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.174,
     "max": 0.174,
     "quality": "reported",
     "raw": "17.4",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.174,
     "max": 0.174,
     "quality": "reported",
     "raw": "17.4",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 0.1,
     "max": 0.1,
     "quality": "reported",
     "raw": "2 cm 100 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm 100 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-02",
     "quality": "reported",
     "raw": "7/2/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/21",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B21",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 21,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0044,
     "max": 0.0044,
     "quality": "reported",
     "raw": "0.44",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 18,
     "max": 18,
     "quality": "reported",
     "raw": "18",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "flame goes out at 0.355 pot setting",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1. NASA's file PSI-25_Experimental table_BASS-II.csv gives the same. NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same.",
     "evidence": "Ignition at 5 cm/s then fan pot turned down slowly after flame; spreads halfway; flame goes out at 0.355 pot setting",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B21 174m 1-cm-wide, 200-µm- thick PMMA 46 1 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "approx": true,
     "quality": "reported",
     "raw": "5 down to ext",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: down to ext.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "1 cm wide 200 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "1 cm wide 200 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.208,
     "max": 0.208,
     "quality": "reported",
     "raw": "20.8",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.206,
     "max": 0.206,
     "quality": "reported",
     "raw": "20.6",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "1 cm wide 200 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 cm wide 200 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-08-04",
     "quality": "reported",
     "raw": "8/4/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/22",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "B22",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 22,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0047,
     "max": 0.0047,
     "quality": "reported",
     "raw": "0.47",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "0.36 (flame out)",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1.",
     "evidence": "Ignition at 5 cm/s then decreased flow in step, fan pot 1.7, 0.5, 0.4, 0.36 (flame out)",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 112, printed page 104, Table A.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 112, printed page 104, Table A.1. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "B22 176m 1-cm-wide, 200-µm- thick PMMA 39 1 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 5,
     "levels": [
      0,
      2,
      5
     ],
     "quality": "reported",
     "raw": "5 2 0",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "1 cm wide 200 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "thin film",
     "quality": "reported",
     "raw": "1 cm wide 200 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Bhattacharjee",
     "quality": "reported",
     "raw": "Bhattacharjee",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.207,
     "max": 0.207,
     "quality": "reported",
     "raw": "20.7",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.205,
     "max": 0.205,
     "quality": "reported",
     "raw": "20.5",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "1 cm wide 200 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 cm wide 200 micron thick PMMA",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-08-04",
     "quality": "reported",
     "raw": "8/4/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/23",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "F1",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 23,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0045,
     "max": 0.0045,
     "quality": "reported",
     "raw": "0.45",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "extinguished while the igniter was still on",
     "column": "p. 113, printed page 105, Table A.2",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 113, printed page 105, Table A.2.",
     "evidence": "Ignited briefly but did not spread at all and extinguished while the igniter was still on",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 113, printed page 105, Table A.2",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 113, printed page 105, Table A.2. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "F1 227 Nomex® (DuPontTM) natural (Nomex III) Integral 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 9.5,
     "max": 9.5,
     "quality": "reported",
     "raw": "9.5",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "Nomex",
     "quality": "reported",
     "raw": "Nomex natural (nomex III)",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "Nomex natural (nomex III)",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "did not ignite",
     "column": "p. 54, printed page 46, section 3.1.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 54, printed page 46, section 3.1.1. NASA's report says this of all three of Ferkul's Nomex samples.",
     "evidence": "The three Nomex® samples did not ignite, which is an excellent result for fire safety aboard the ISS.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "Ferkul",
     "quality": "reported",
     "raw": "Ferkul",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.222,
     "max": 0.222,
     "quality": "reported",
     "raw": "22.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.222,
     "max": 0.222,
     "quality": "reported",
     "raw": "22.2",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "test_date": {
     "text": "2014-02-19",
     "quality": "reported",
     "raw": "2/19/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/24",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "F2",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 24,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0039,
     "max": 0.0039,
     "quality": "reported",
     "raw": "0.39",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 82,
     "max": 82,
     "quality": "reported",
     "raw": "82",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 113, printed page 105, Table A.2",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 113, printed page 105, Table A.2. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "F2 228m Nomex® natural (Nomex III) Integral 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 15,
     "max": 15,
     "quality": "reported",
     "raw": "15",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "Nomex",
     "quality": "reported",
     "raw": "Nomex natural (nomex III)",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "Nomex natural (nomex III)",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "flame would not sustain",
     "column": "p. 113, printed page 105, Table A.2",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 113, printed page 105, Table A.2. NASA's observation says the sample did not ignite or keep a flame. NASA's file PSI-25_Reports_BASS-II Summary Report.pdf gives the same.",
     "evidence": "Tried to ignite, flame would not sustain",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "Ferkul",
     "quality": "reported",
     "raw": "Ferkul",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "21",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "21",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "test_date": {
     "text": "2014-07-28",
     "quality": "reported",
     "raw": "7/28/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/25",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "F3",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 25,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 113, printed page 105, Table A.2",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 113, printed page 105, Table A.2. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "F3 229m Nomex® natural (Nomex III) Integral 1 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "Nomex",
     "quality": "reported",
     "raw": "Nomex natural (nomex III)",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "Nomex natural (nomex III)",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "no sustained flame",
     "column": "p. 113, printed page 105, Table A.2",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 113, printed page 105, Table A.2. NASA's observation says the sample did not ignite or keep a flame. NASA's file PSI-25_Reports_BASS-II Summary Report.pdf gives the same.",
     "evidence": "Brief ignition flash, no sustained flame; no postburn sensor readings taken",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "Ferkul",
     "quality": "reported",
     "raw": "Ferkul",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.217,
     "max": 0.217,
     "quality": "reported",
     "raw": "21.7",
     "column": "Calibrated initial O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "test_date": {
     "text": "2014-08-01",
     "quality": "reported",
     "raw": "8/1/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/26",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "F4",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 26,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0048,
     "max": 0.0048,
     "quality": "reported",
     "raw": "0.48",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 56,
     "max": 56,
     "quality": "reported",
     "raw": "56",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "0.305 flame extinguished",
     "column": "p. 113, printed page 105, Table A.2",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 113, printed page 105, Table A.2.",
     "evidence": "Long ignition, but blue flame established at 3 cm/s, reduced flow in increments: potentiometers 0.6, 0.4, 0.35, 0.32, 0.31, 0.305 flame extinguished",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "stagnation",
     "quality": "reported",
     "raw": "Stagnation",
     "column": "p. 113, printed page 105, Table A.2",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 113, printed page 105, Table A.2. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "F4 39M Japan Wax candle Integral 2 Stagnation",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 3,
     "max": 3,
     "approx": true,
     "quality": "reported",
     "raw": "3 ign",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: ign.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "Japan wax",
     "quality": "reported",
     "raw": "Japan Wax candle",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "candle",
     "quality": "reported",
     "raw": "Japan Wax candle",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Ferkul",
     "quality": "reported",
     "raw": "Ferkul",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.174,
     "max": 0.174,
     "quality": "reported",
     "raw": "17.4",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.174,
     "max": 0.174,
     "quality": "reported",
     "raw": "17.4",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "test_date": {
     "text": "2014-06-24",
     "quality": "reported",
     "raw": "6/24/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/27",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "M1",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 27,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "burn_time_s": {
     "min": 384,
     "max": 384,
     "quality": "reported",
     "raw": "6.4",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA gives 6.4 min; multiplied by 60.",
     "evidence": "M1 1 2.2 1 9 0.071 6.4 22.2 21.9",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "co2_fraction_final": {
     "min": 0.0061,
     "max": 0.0061,
     "quality": "reported",
     "raw": "0.61",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 60,
     "max": 60,
     "quality": "reported",
     "raw": "60",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "put flame out by turning off flow",
     "column": "p. 116, printed page 108, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 116, printed page 108, Table A.4. NASA's observation says the crew turned the air flow off to end the burn.",
     "evidence": "Prolonged ignition, flame initially on both sides, after igniter off and flame moved away from end, bottom flame died and top flame became all blue and small; very slow propagation; changed flow from 10 to 8 cm/s and flame shrank to a circle; spread just over 1/3 of sample when we ran out of camera card, and put flame out by turning off flow",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 116, printed page 108, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 116, printed page 108, Table A.4. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "M1 222 1-mm-thick PMMA, one-sided, 2 cm Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 8,
     "max": 10,
     "levels": [
      8,
      10
     ],
     "quality": "reported",
     "raw": "10 8",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "1 mm thick PMMA 1 sided 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "1 mm thick PMMA 1 sided 2 cm",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Miller",
     "quality": "reported",
     "raw": "Miller",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.222,
     "max": 0.222,
     "quality": "reported",
     "raw": "22.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.219,
     "max": 0.219,
     "quality": "reported",
     "raw": "21.9",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 mm thick PMMA 1 sided 2 cm",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "1 mm thick PMMA 1 sided 2 cm",
     "column": "Fuel Sample Material"
    },
    "spread_rate_mm_s": {
     "min": 0.071,
     "max": 0.071,
     "quality": "reported",
     "raw": "0.071",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1.",
     "evidence": "M1 1 2.2 1 9 0.071 6.4 22.2 21.9",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "test_date": {
     "text": "2014-02-20",
     "quality": "reported",
     "raw": "2/20/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/28",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "M2",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 28,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "burn_time_s": {
     "min": 1374,
     "max": 1374,
     "quality": "reported",
     "raw": "22.9",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA gives 22.9 min; multiplied by 60.",
     "evidence": "M2 3 2.2 1 20 and 15 0.052 and 0.033 22.9 22.2 21.2",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "co2_fraction_final": {
     "min": 0.0133,
     "max": 0.0133,
     "quality": "reported",
     "raw": "1.33",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 325,
     "max": 325,
     "quality": "reported",
     "raw": "325",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "it self- extinguished",
     "column": "p. 117, printed page 109, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 117, printed page 109, Table A.4.",
     "evidence": "Ignite at 20 cm/s, turn down to 15 cm/s after spread away from igniter; seemed steady, so turned down to 13 cm/s; flame got very dim, so increased flow to 14 cm/s, but it self- extinguished",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 117, printed page 109, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 117, printed page 109, Table A.4. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "M2 224 3-mm-thick PMMA one- sided, 2 cm wide Integral 0 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 13,
     "max": 20,
     "levels": [
      13,
      14,
      15,
      20
     ],
     "quality": "reported",
     "raw": "20 15 13 14",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "3 mm thick PMMA 1 sided 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "3 mm thick PMMA 1 sided 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Miller",
     "quality": "reported",
     "raw": "Miller",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.222,
     "max": 0.222,
     "quality": "reported",
     "raw": "22.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.212,
     "max": 0.212,
     "quality": "reported",
     "raw": "21.2",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 3,
     "max": 3,
     "quality": "reported",
     "raw": "3 mm thick PMMA 1 sided 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "3 mm thick PMMA 1 sided 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "spread_rate_mm_s": {
     "min": 0.033,
     "max": 0.052,
     "quality": "reported",
     "raw": "0.052 and 0.033",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA lists the spread rates 0.052 and 0.033 mm/s at the velocities 20 and 15 cm/s, in that order. The value here runs from the lowest to the highest.",
     "evidence": "M2 3 2.2 1 20 and 15 0.052 and 0.033 22.9 22.2 21.2",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "test_date": {
     "text": "2014-02-20",
     "quality": "reported",
     "raw": "2/20/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/29",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "M3",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 29,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "burn_time_s": {
     "min": 1206,
     "max": 1206,
     "quality": "reported",
     "raw": "20.1",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA gives 20.1 min; multiplied by 60.",
     "evidence": "M3 5 2.2 1 10 and 20 0.029 and 0.024 20.1 20.8 19.7",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "co2_fraction_final": {
     "min": 0.0118,
     "max": 0.0118,
     "quality": "reported",
     "raw": "1.18",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 300,
     "max": 300,
     "quality": "reported",
     "raw": "300",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinguished at 18 cm/s",
     "column": "p. 117, printed page 109, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 117, printed page 109, Table A.4.",
     "evidence": "Extinguished at 18 cm/s; HCl 0.6 > 2.6",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 117, printed page 109, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 117, printed page 109, Table A.4. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "M3 226m 2-cm-wide, 5-mm-thick, one-sided PMMA Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 10,
     "max": 20,
     "levels": [
      10,
      18,
      20
     ],
     "quality": "reported",
     "raw": "10 20 18",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "2 cm wide 5 mm thick 1 sided PMMA",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "2 cm wide 5 mm thick 1 sided PMMA",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Miller",
     "quality": "reported",
     "raw": "Miller",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.208,
     "max": 0.208,
     "quality": "reported",
     "raw": "20.8",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.197,
     "max": 0.197,
     "quality": "reported",
     "raw": "19.7",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "2 cm wide 5 mm thick 1 sided PMMA",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm wide 5 mm thick 1 sided PMMA",
     "column": "Fuel Sample Material"
    },
    "spread_rate_mm_s": {
     "min": 0.024,
     "max": 0.029,
     "quality": "reported",
     "raw": "0.029 and 0.024",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA lists the spread rates 0.029 and 0.024 mm/s at the velocities 10 and 20 cm/s, in that order. The value here runs from the lowest to the highest.",
     "evidence": "M3 5 2.2 1 10 and 20 0.029 and 0.024 20.1 20.8 19.7",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "test_date": {
     "text": "2014-07-11",
     "quality": "reported",
     "raw": "7/11/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/30",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "M4",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 30,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "burn_time_s": {
     "min": 1188,
     "max": 1188,
     "quality": "reported",
     "raw": "19.8",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA gives 19.8 min; multiplied by 60.",
     "evidence": "M4 5 2.2 2 5 and 3 0.045 and 0.033 19.8 21.8 19.8",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "co2_fraction_final": {
     "min": 0.0215,
     "max": 0.0215,
     "quality": "reported",
     "raw": "2.15",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 561,
     "max": 561,
     "quality": "reported",
     "raw": "561",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "finally extinguished by turning pot down to 0.3",
     "column": "p. 117, printed page 109, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 117, printed page 109, Table A.4.",
     "evidence": "Mild ignition at 10 cm/s; decreased flow down holding constant for 6 min at pot settings of 1.7, 1.0, and 0.55; finally extinguished by turning pot down to 0.3",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 117, printed page 109, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 117, printed page 109, Table A.4. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "M4 171m 5-mm-thick PMMA, 2 cm wide Integral 1 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 3,
     "max": 5,
     "levels": [
      3,
      4,
      5
     ],
     "quality": "reported",
     "raw": "5 4 3",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "5 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "5 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Miller",
     "quality": "reported",
     "raw": "Miller",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.218,
     "max": 0.218,
     "quality": "reported",
     "raw": "21.8",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.198,
     "max": 0.198,
     "quality": "reported",
     "raw": "19.8",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "5 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "spread_rate_mm_s": {
     "min": 0.033,
     "max": 0.045,
     "quality": "reported",
     "raw": "0.045 and 0.033",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA lists the spread rates 0.045 and 0.033 mm/s at the velocities 5 and 3 cm/s, in that order. The value here runs from the lowest to the highest.",
     "evidence": "M4 5 2.2 2 5 and 3 0.045 and 0.033 19.8 21.8 19.8",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "test_date": {
     "text": "2014-07-31",
     "quality": "reported",
     "raw": "7/31/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/31",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "M5",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 31,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "burn_time_s": {
     "min": 1632,
     "max": 1632,
     "quality": "reported",
     "raw": "27.2",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA gives 27.2 min; multiplied by 60.",
     "evidence": "M5 3 2.2 2 10 0.071 27.2 22.2 19",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "co2_fraction_final": {
     "min": 0.0322,
     "max": 0.0322,
     "quality": "reported",
     "raw": "3.22",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "text": ">500",
     "quality": "reported",
     "raw": ">500",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "extinguished at 5 cm/s after prolonged flashing",
     "column": "p. 117, printed page 109, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 117, printed page 109, Table A.4.",
     "evidence": "Rick ignited while we were loss of signal and out of contact with ISS, unfortunately; ignition was ~3 min per his verbal call down when we came back; flame already burning ~1/3 of sample, both sides, long and sooty; more vapor jetting on bottom due to molten ball attached there, visible when lights on to change camera card; turned down to 10 cm/s, then further down in increments to 5 cm/s; extinguished at 5 cm/s after prolonged flashing; during soot cleaning, Rick noticed damage to front door corner by the switches; He sent pictures down for us to evaluate for damage; CO reading posttest was off-scale; came back during purge reading 500",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 117, printed page 109, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 117, printed page 109, Table A.4. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "M5 167 3-mm-thick PMMA, two-sided, 2 cm thick Integral 0 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 20,
     "levels": [
      5,
      8,
      10,
      13,
      20
     ],
     "quality": "reported",
     "raw": "20 13 10 8 5",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "3 mm thick PMMA 2 sided 2 cm thick",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "3 mm thick PMMA 2 sided 2 cm thick",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Miller",
     "quality": "reported",
     "raw": "Miller",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.222,
     "max": 0.222,
     "quality": "reported",
     "raw": "22.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.19,
     "max": 0.19,
     "quality": "reported",
     "raw": "19",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 3,
     "max": 3,
     "quality": "reported",
     "raw": "3 mm thick PMMA 2 sided 2 cm thick",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "3 mm thick PMMA 2 sided 2 cm thick",
     "column": "Fuel Sample Material"
    },
    "spread_rate_mm_s": {
     "min": 0.071,
     "max": 0.071,
     "quality": "reported",
     "raw": "0.071",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1.",
     "evidence": "M5 3 2.2 2 10 0.071 27.2 22.2 19",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "test_date": {
     "text": "2014-02-20",
     "quality": "reported",
     "raw": "2/20/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/32",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "M6",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 32,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "burn_time_s": {
     "min": 1008,
     "max": 1008,
     "quality": "reported",
     "raw": "16.8",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA gives 16.8 min; multiplied by 60.",
     "evidence": "M6 1 2.2 2 10 and 8 Not tracked 16.8 21.8 20.7",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "co2_fraction_final": {
     "min": 0.0127,
     "max": 0.0127,
     "quality": "reported",
     "raw": "1.27",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 345,
     "max": 345,
     "quality": "reported",
     "raw": "345",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 117, printed page 109, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 117, printed page 109, Table A.4. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "M6 163m 1-mm-thick PMMA, 2 cm wide Integral 1 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 10,
     "levels": [
      0,
      3,
      5,
      10
     ],
     "quality": "reported",
     "raw": "10 5 3 0",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "1 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "1 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Aggressive ignition led to large flame initially",
     "column": "p. 117, printed page 109, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 117, printed page 109, Table A.4. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "Aggressive ignition led to large flame initially; once flame settled down, we kept flow low and had two flow plateaus (pot 0.4 and 0.36); when flame reached end of sample it started backing up and spreading along the edges.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "Miller",
     "quality": "reported",
     "raw": "Miller",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.218,
     "max": 0.218,
     "quality": "reported",
     "raw": "21.8",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.207,
     "max": 0.207,
     "quality": "reported",
     "raw": "20.7",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "1 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-31",
     "quality": "reported",
     "raw": "7/31/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/33",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "M7",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 33,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "burn_time_s": {
     "min": 1104,
     "max": 1104,
     "quality": "reported",
     "raw": "18.4",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA gives 18.4 min; multiplied by 60.",
     "evidence": "M7 1 1.2 2 10, 6, 5, and 3 0.106, 0.099, 0.083, and 0.07 18.4 18.9 18.4",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "co2_fraction_final": {
     "min": 0.0184,
     "max": 0.0184,
     "quality": "reported",
     "raw": "1.84",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 612,
     "max": 612,
     "quality": "reported",
     "raw": "612",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "burned entire sample",
     "column": "p. 117, printed page 109, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 117, printed page 109, Table A.4.",
     "evidence": "18 min burn; burned entire sample; HCl 2.2 > 3.9",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 117, printed page 109, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 117, printed page 109, Table A.4. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "M7 177m 1-cm-wide PMMA, 1 mm thick Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 3,
     "max": 10,
     "levels": [
      3,
      4,
      4.5,
      5,
      6,
      10
     ],
     "quality": "reported",
     "raw": "10 6 5 4.5 4 3",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "1 cm wide PMMA 1 mm thick",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "1 cm wide PMMA 1 mm thick",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Miller",
     "quality": "reported",
     "raw": "Miller",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.189,
     "max": 0.189,
     "quality": "reported",
     "raw": "18.9",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.184,
     "max": 0.184,
     "quality": "reported",
     "raw": "18.4",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 cm wide PMMA 1 mm thick",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 cm wide PMMA 1 mm thick",
     "column": "Fuel Sample Material"
    },
    "spread_rate_mm_s": {
     "min": 0.07,
     "max": 0.106,
     "quality": "reported",
     "raw": "0.106, 0.099, 0.083, and 0.07",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA lists the spread rates 0.106, 0.099, 0.083, and 0.07 mm/s at the velocities 10, 6, 5, and 3 cm/s, in that order. The value here runs from the lowest to the highest.",
     "evidence": "M7 1 1.2 2 10, 6, 5, and 3 0.106, 0.099, 0.083, and 0.07 18.4 18.9 18.4",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "test_date": {
     "text": "2014-07-11",
     "quality": "reported",
     "raw": "7/11/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/34",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "M8",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 34,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "burn_time_s": {
     "min": 1512,
     "max": 1512,
     "quality": "reported",
     "raw": "25.2",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA gives 25.2 min; multiplied by 60.",
     "evidence": "M8 2 1.2 2 10, 6, and 5 0.057, 0.056, and 0.04 25.2 19.1 18.2",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "co2_fraction_final": {
     "min": 0.0128,
     "max": 0.0128,
     "quality": "reported",
     "raw": "1.28",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 467,
     "max": 467,
     "quality": "reported",
     "raw": "467",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "turned down flow to extinguish, went out at pot 0.4",
     "column": "p. 117, printed page 109, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 117, printed page 109, Table A.4.",
     "evidence": "25-min burn; turned down flow to extinguish, went out at pot 0.4; HCl 0.4 > 4.6",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 117, printed page 109, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 117, printed page 109, Table A.4. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "M8 178m 1-cm-wide PMMA, 2 mm thick Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 10,
     "levels": [
      5,
      7,
      10
     ],
     "approx": true,
     "quality": "reported",
     "raw": "10 5>7 5 decr",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: decr.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "1 cm wide PMMA 2 mm thick",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "1 cm wide PMMA 2 mm thick",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Miller",
     "quality": "reported",
     "raw": "Miller",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.191,
     "max": 0.191,
     "quality": "reported",
     "raw": "19.1",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.182,
     "max": 0.182,
     "quality": "reported",
     "raw": "18.2",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "1 cm wide PMMA 2 mm thick",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 cm wide PMMA 2 mm thick",
     "column": "Fuel Sample Material"
    },
    "spread_rate_mm_s": {
     "min": 0.04,
     "max": 0.057,
     "quality": "reported",
     "raw": "0.057, 0.056, and 0.04",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA lists the spread rates 0.057, 0.056, and 0.04 mm/s at the velocities 10, 6, and 5 cm/s, in that order. The value here runs from the lowest to the highest.",
     "evidence": "M8 2 1.2 2 10, 6, and 5 0.057, 0.056, and 0.04 25.2 19.1 18.2",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "test_date": {
     "text": "2014-07-11",
     "quality": "reported",
     "raw": "7/11/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/35",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "M9",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 35,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "burn_time_s": {
     "min": 1008,
     "max": 1008,
     "quality": "reported",
     "raw": "16.8",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA gives 16.8 min; multiplied by 60.",
     "evidence": "M9 3 1.2 2 14 0.025 16.8 18 17.6",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "co2_fraction_final": {
     "min": 0.0054,
     "max": 0.0054,
     "quality": "reported",
     "raw": "0.54",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 191,
     "max": 191,
     "quality": "reported",
     "raw": "191",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "died after 15 min at 14 cm/s",
     "column": "p. 117, printed page 109, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 117, printed page 109, Table A.4.",
     "evidence": "Ignited at 10 cm/s, photographs every 5 s or so, turned up flow when flame looked weak; died after 15 min at 14 cm/s; 17-min burn; HCl 0 > 1.7",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 117, printed page 109, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 117, printed page 109, Table A.4. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "M9 179m 1-cm-wide PMMA, 3 mm thick Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 10,
     "max": 14,
     "levels": [
      10,
      14
     ],
     "quality": "reported",
     "raw": "10 14",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "1 cm wide PMMA 3 mm thick",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "1 cm wide PMMA 3 mm thick",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Miller",
     "quality": "reported",
     "raw": "Miller",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "18",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.176,
     "max": 0.176,
     "quality": "reported",
     "raw": "17.6",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 3,
     "max": 3,
     "quality": "reported",
     "raw": "1 cm wide PMMA 3 mm thick",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 cm wide PMMA 3 mm thick",
     "column": "Fuel Sample Material"
    },
    "spread_rate_mm_s": {
     "min": 0.025,
     "max": 0.025,
     "quality": "reported",
     "raw": "0.025",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1.",
     "evidence": "M9 3 1.2 2 14 0.025 16.8 18 17.6",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "test_date": {
     "text": "2014-07-11",
     "quality": "reported",
     "raw": "7/11/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/36",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "M10",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 36,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "burn_time_s": {
     "min": 1830,
     "max": 1830,
     "quality": "reported",
     "raw": "30.5",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA gives 30.5 min; multiplied by 60.",
     "evidence": "M10 4 1.2 2 15 and 10 0.0373 and 0.03 30.5 20.1 18.6",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "co2_fraction_final": {
     "min": 0.0159,
     "max": 0.0159,
     "quality": "reported",
     "raw": "1.59",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 536,
     "max": 536,
     "quality": "reported",
     "raw": "536",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "flame self-extinguished at 8 cm/s after almost 10 min",
     "column": "p. 116, printed page 108, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 116, printed page 108, Table A.4.",
     "evidence": "Long burn, quick ignition, flame in seconds, kept it on 40 s + 2nd on for another 10 to 15 s when it was shrinking; multiple flows for steady spreading; flame big at 17, so only left it there 3 min; other flows longer; flame self-extinguished at 8 cm/s after almost 10 min; Alex saw it going out and locked shutter for the last few seconds; pictures start after ignition, about every 8 s",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 116, printed page 108, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 116, printed page 108, Table A.4. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "M10 180m 4-mm-thick, 1-cm-wide PMMA slab Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 8,
     "max": 17,
     "levels": [
      8,
      10,
      14,
      17
     ],
     "quality": "reported",
     "raw": "10 17 14 10 8",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "4 mm thick 1 cm wide PMMA slab",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "4 mm thick 1 cm wide PMMA slab",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Miller",
     "quality": "reported",
     "raw": "Miller",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.201,
     "max": 0.201,
     "quality": "reported",
     "raw": "20.1",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.186,
     "max": 0.186,
     "quality": "reported",
     "raw": "18.6",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "4 mm thick 1 cm wide PMMA slab",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "4 mm thick 1 cm wide PMMA slab",
     "column": "Fuel Sample Material"
    },
    "spread_rate_mm_s": {
     "min": 0.03,
     "max": 0.0373,
     "quality": "reported",
     "raw": "0.0373 and 0.03",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA lists the spread rates 0.0373 and 0.03 mm/s at the velocities 15 and 10 cm/s, in that order. The value here runs from the lowest to the highest.",
     "evidence": "M10 4 1.2 2 15 and 10 0.0373 and 0.03 30.5 20.1 18.6",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "test_date": {
     "text": "2014-07-23",
     "quality": "reported",
     "raw": "7/23/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/37",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "M11",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 37,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "burn_time_s": {
     "min": 1710,
     "max": 1710,
     "quality": "reported",
     "raw": "28.5",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA gives 28.5 min; multiplied by 60.",
     "evidence": "M11 5 1.2 2 21, 15, and 13 0.048, 0.028, and 0.022 28.5 20 18.5",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "co2_fraction_final": {
     "min": 0.0168,
     "max": 0.0168,
     "quality": "reported",
     "raw": "1.68",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 577,
     "max": 577,
     "quality": "reported",
     "raw": "577",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "extinguished at 12 cm/s",
     "column": "p. 116, printed page 108, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 116, printed page 108, Table A.4.",
     "evidence": "29-min burn; extinguished at 12 cm/s., HCl 0.5 > 5.0",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 116, printed page 108, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 116, printed page 108, Table A.4. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "M11 181m 1-cm-wide PMMA 5 mm thick Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 10,
     "max": 20,
     "levels": [
      10,
      12,
      15,
      20
     ],
     "quality": "reported",
     "raw": "10 20 15 12",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "1 cm wide PMMA 5 mm thick",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "1 cm wide PMMA 5 mm thick",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Miller",
     "quality": "reported",
     "raw": "Miller",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "20",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.185,
     "max": 0.185,
     "quality": "reported",
     "raw": "18.5",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "1 cm wide PMMA 5 mm thick",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 cm wide PMMA 5 mm thick",
     "column": "Fuel Sample Material"
    },
    "spread_rate_mm_s": {
     "min": 0.022,
     "max": 0.048,
     "quality": "reported",
     "raw": "0.048, 0.028, and 0.022",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA lists the spread rates 0.048, 0.028, and 0.022 mm/s at the velocities 21, 15, and 13 cm/s, in that order. The value here runs from the lowest to the highest.",
     "evidence": "M11 5 1.2 2 21, 15, and 13 0.048, 0.028, and 0.022 28.5 20 18.5",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "test_date": {
     "text": "2014-07-11",
     "quality": "reported",
     "raw": "7/11/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/38",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "M12",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 38,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "burn_time_s": {
     "min": 972,
     "max": 972,
     "quality": "reported",
     "raw": "16.2",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA gives 16.2 min; multiplied by 60.",
     "evidence": "M12 2 2.2 2 12 and 10 Not tracked 16.2 21.7 20.4",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "co2_fraction_final": {
     "min": 0.0142,
     "max": 0.0142,
     "quality": "reported",
     "raw": "1.42",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 443,
     "max": 443,
     "quality": "reported",
     "raw": "443",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 116, printed page 108, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 116, printed page 108, Table A.4. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "M12 165m 2-mm-thick PMMA, 2 cm wide Integral 1 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "text": "<1",
     "quality": "reported",
     "raw": "<1",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "2 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "2 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Vigorous ignition led to trying to get flame under control",
     "column": "p. 116, printed page 108, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 116, printed page 108, Table A.4. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "Vigorous ignition led to trying to get flame under control; finally had about plateaus at pot = 0.35, 0.4, and again 0.35",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "Miller",
     "quality": "reported",
     "raw": "Miller",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.217,
     "max": 0.217,
     "quality": "reported",
     "raw": "21.7",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.204,
     "max": 0.204,
     "quality": "reported",
     "raw": "20.4",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-31",
     "quality": "reported",
     "raw": "7/31/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/39",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "M13",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 39,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "burn_time_s": {
     "min": 1230,
     "max": 1230,
     "quality": "reported",
     "raw": "20.5",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA gives 20.5 min; multiplied by 60.",
     "evidence": "M13 4 2.2 2 6, 5, and 4 0.047, 0.035, and 0.033 20.5 20.8 19",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "co2_fraction_final": {
     "min": 0.0175,
     "max": 0.0175,
     "quality": "reported",
     "raw": "1.75",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 487,
     "max": 487,
     "quality": "reported",
     "raw": "487",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "finally extinguished by turning pot down to 0.3",
     "column": "p. 116, printed page 108, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 116, printed page 108, Table A.4.",
     "evidence": "Mild ignition at 10 cm/s; decreased flow down holding constant for 6 min at pot settings of 1.7, 1.0, and 0.55; finally extinguished by turning pot down to 0.3",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 116, printed page 108, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 116, printed page 108, Table A.4. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "M13 169m 4-mm-thick PMMA, 2 cm wide Integral 1 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 4,
     "max": 6,
     "levels": [
      4,
      5,
      6
     ],
     "quality": "reported",
     "raw": "6 5 4",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "4 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "4 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Miller",
     "quality": "reported",
     "raw": "Miller",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.208,
     "max": 0.208,
     "quality": "reported",
     "raw": "20.8",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.19,
     "max": 0.19,
     "quality": "reported",
     "raw": "19",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "4 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "4 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "spread_rate_mm_s": {
     "min": 0.033,
     "max": 0.047,
     "quality": "reported",
     "raw": "0.047, 0.035, and 0.033",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA lists the spread rates 0.047, 0.035, and 0.033 mm/s at the velocities 6, 5, and 4 cm/s, in that order. The value here runs from the lowest to the highest.",
     "evidence": "M13 4 2.2 2 6, 5, and 4 0.047, 0.035, and 0.033 20.5 20.8 19",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "test_date": {
     "text": "2014-07-31",
     "quality": "reported",
     "raw": "7/31/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/40",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "M14",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 40,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "burn_time_s": {
     "min": 924,
     "max": 924,
     "quality": "reported",
     "raw": "15.4",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA gives 15.4 min; multiplied by 60.",
     "evidence": "M14 2 2.2 1 15, 14, and 10 0.0624, 0.055, and 0.0353 15.4 22.2 21.6",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "co2_fraction_final": {
     "min": 0.0098,
     "max": 0.0098,
     "quality": "reported",
     "raw": "0.98",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 198,
     "max": 198,
     "quality": "reported",
     "raw": "198",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "flame self-extinguished at an air reading of 9 cm/s",
     "column": "p. 116, printed page 108, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 116, printed page 108, Table A.4.",
     "evidence": "Prolonged ignition, followed by flow reduction after flame moved away from igniter region and spread steadily; flame self-extinguished at an air reading of 9 cm/s.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 116, printed page 108, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 116, printed page 108, Table A.4. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "M14 223 2-mm-thick PMMA, one- sided, 2 cm wide Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 8,
     "max": 10,
     "levels": [
      8,
      10
     ],
     "approx": true,
     "quality": "reported",
     "raw": "10 ~8",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "2mm thick PMMA 1 sided 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "2mm thick PMMA 1 sided 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Miller",
     "quality": "reported",
     "raw": "Miller",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.222,
     "max": 0.222,
     "quality": "reported",
     "raw": "22.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.216,
     "max": 0.216,
     "quality": "reported",
     "raw": "21.6",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2mm thick PMMA 1 sided 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2mm thick PMMA 1 sided 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "spread_rate_mm_s": {
     "min": 0.0353,
     "max": 0.0624,
     "quality": "reported",
     "raw": "0.0624, 0.055, and 0.0353",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA lists the spread rates 0.0624, 0.055, and 0.0353 mm/s at the velocities 15, 14, and 10 cm/s, in that order. The value here runs from the lowest to the highest.",
     "evidence": "M14 2 2.2 1 15, 14, and 10 0.0624, 0.055, and 0.0353 15.4 22.2 21.6",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "test_date": {
     "text": "2014-02-20",
     "quality": "reported",
     "raw": "2/20/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/41",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "M15",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 41,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "burn_time_s": {
     "min": 1320,
     "max": 1320,
     "quality": "reported",
     "raw": "22.0",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA gives 22.0 min; multiplied by 60.",
     "evidence": "M15 4 2.2 1 20 0.045 22.0 21 20",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "co2_fraction_final": {
     "min": 0.011,
     "max": 0.011,
     "quality": "reported",
     "raw": "1.1",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 220,
     "max": 220,
     "quality": "reported",
     "raw": "220",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "got spreading and slow extinction there",
     "column": "p. 116, printed page 108, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 116, printed page 108, Table A.4.",
     "evidence": "Ignited and turned flow down to control flame size during end burning, then turned flow up to 20 cm/s and got steady spreading there, turned down flow to 15 and got spreading and slow extinction there.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 116, printed page 108, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 116, printed page 108, Table A.4. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "M15 225m 2-cm, 4-mm, one-sided PMMA slab Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 7,
     "max": 20,
     "levels": [
      7,
      8,
      10,
      15,
      16,
      18,
      20
     ],
     "quality": "reported",
     "raw": "10 8 7 8 10 20 18 16 15",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "2 cm 4 mm 1 sided PMMA slab",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "2 cm 4 mm 1 sided PMMA slab",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "ignited 10   adjusted down then up to 20   down in incrments to 15",
     "column": "row 41, column Fan display",
     "note": "From NASA's file PSI-25_Experimental table_BASS-II.csv, row 41, column Fan display. NASA's remark in this cell is \"ignited\". NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same."
    },
    "investigator": {
     "text": "Miller",
     "quality": "reported",
     "raw": "Miller",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "21",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "20",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "2 cm 4 mm 1 sided PMMA slab",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm 4 mm 1 sided PMMA slab",
     "column": "Fuel Sample Material"
    },
    "spread_rate_mm_s": {
     "min": 0.045,
     "max": 0.045,
     "quality": "reported",
     "raw": "0.045",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1.",
     "evidence": "M15 4 2.2 1 20 0.045 22.0 21 20",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "test_date": {
     "text": "2014-07-07",
     "quality": "reported",
     "raw": "7/7/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/42",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "M16",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 42,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "burn_time_s": {
     "min": 504,
     "max": 504,
     "quality": "reported",
     "raw": "8.4",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA gives 8.4 min; multiplied by 60.",
     "evidence": "M16 1 2.2 2 5, 3, and 2 0.144, 0.1309, and 0.1062 8.4 19.2 18.7",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "co2_fraction_final": {
     "min": 0.0175,
     "max": 0.0175,
     "quality": "reported",
     "raw": "1.75",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 421,
     "max": 421,
     "quality": "reported",
     "raw": "421",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 116, printed page 108, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 116, printed page 108, Table A.4. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "M16 164m 1-mm-thick PMMA, 2 cm wide Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 1,
     "max": 10,
     "levels": [
      1,
      2,
      3,
      6,
      10
     ],
     "quality": "reported",
     "raw": "10 6 3 2 1 10",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "1 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "1 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Burned at decreasing flow down to 1 cm/s or so",
     "column": "p. 116, printed page 108, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 116, printed page 108, Table A.4. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "Burned at decreasing flow down to 1 cm/s or so, still fine, at end of sample, turned up flow to 10 cm/s and flame got really long; turned it down but Alex reported some soot on the door and some on the heat sink; dry wipe would not wipe off; try Monday with some other—water?",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "Miller",
     "quality": "reported",
     "raw": "Miller",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.192,
     "max": 0.192,
     "quality": "reported",
     "raw": "19.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.187,
     "max": 0.187,
     "quality": "reported",
     "raw": "18.7",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "1 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "spread_rate_mm_s": {
     "min": 0.1062,
     "max": 0.144,
     "quality": "reported",
     "raw": "0.144, 0.1309, and 0.1062",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA lists the spread rates 0.144, 0.1309, and 0.1062 mm/s at the velocities 5, 3, and 2 cm/s, in that order. The value here runs from the lowest to the highest.",
     "evidence": "M16 1 2.2 2 5, 3, and 2 0.144, 0.1309, and 0.1062 8.4 19.2 18.7",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "test_date": {
     "text": "2014-07-23",
     "quality": "reported",
     "raw": "7/23/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/43",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "M17",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 43,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "burn_time_s": {
     "min": 1842,
     "max": 1842,
     "quality": "reported",
     "raw": "30.7",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA gives 30.7 min; multiplied by 60.",
     "evidence": "M17 2 2.2 2 5, 4, and 3 0.053, 0.042, and 0.026 30.7 18.8 17.1",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "co2_fraction_final": {
     "min": 0.017,
     "max": 0.017,
     "quality": "reported",
     "raw": "1.7",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 485,
     "max": 485,
     "quality": "reported",
     "raw": "485",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "finally turned fan pot to 0 to extinguish",
     "column": "p. 116, printed page 108, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 116, printed page 108, Table A.4. NASA's observation says the crew turned the air flow off to end the burn. NASA's file PSI-25_Experimental table_BASS-II.csv gives \"extinction\" (row 43, column Air display). NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives \"extinction\" (Miller!H18).",
     "evidence": "30-min burn targeted constant flows of 10, 5, and 3; finally turned fan pot to 0 to extinguish. HCl 0.3 > 3.7",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 116, printed page 108, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 116, printed page 108, Table A.4. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "M17 166m 2-cm-wide PMMA, 2 mm thick Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 10,
     "levels": [
      0,
      3,
      5,
      10
     ],
     "approx": true,
     "quality": "reported",
     "raw": "10 5 3 0ext",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: ext.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "2 cm wide PMMA 2 mm thick",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "2 cm wide PMMA 2 mm thick",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Miller",
     "quality": "reported",
     "raw": "Miller",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.188,
     "max": 0.188,
     "quality": "reported",
     "raw": "18.8",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.171,
     "max": 0.171,
     "quality": "reported",
     "raw": "17.1",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm wide PMMA 2 mm thick",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm wide PMMA 2 mm thick",
     "column": "Fuel Sample Material"
    },
    "spread_rate_mm_s": {
     "min": 0.026,
     "max": 0.053,
     "quality": "reported",
     "raw": "0.053, 0.042, and 0.026",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA lists the spread rates 0.053, 0.042, and 0.026 mm/s at the velocities 5, 4, and 3 cm/s, in that order. The value here runs from the lowest to the highest.",
     "evidence": "M17 2 2.2 2 5, 4, and 3 0.053, 0.042, and 0.026 30.7 18.8 17.1",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "test_date": {
     "text": "2014-07-15",
     "quality": "reported",
     "raw": "7/15/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/44",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "M18",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 44,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "burn_time_s": {
     "min": 1530,
     "max": 1530,
     "quality": "reported",
     "raw": "25.5",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA gives 25.5 min; multiplied by 60.",
     "evidence": "M18 3 2.2 2 10 and 8 0.026 and 0.013 25.5 17.9 16.8",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "co2_fraction_final": {
     "min": 0.0131,
     "max": 0.0131,
     "quality": "reported",
     "raw": "1.31",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 335,
     "max": 335,
     "quality": "reported",
     "raw": "335",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "extinguished 8 cm/s",
     "column": "p. 116, printed page 108, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 116, printed page 108, Table A.4.",
     "evidence": "26-min burn; flow briefly at 15 cm/s but flame was too strong so turned down; HCl 0 > 3.1, extinguished 8 cm/s",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 116, printed page 108, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 116, printed page 108, Table A.4. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "M18 168m 2-cm-wide PMMA, 3 mm thick Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 8,
     "max": 15,
     "levels": [
      8,
      10,
      15
     ],
     "quality": "reported",
     "raw": "10 15 (brief) 10 8",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: brief.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "2 cm wide PMMA 3 mm thick",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "2 cm wide PMMA 3 mm thick",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Miller",
     "quality": "reported",
     "raw": "Miller",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.179,
     "max": 0.179,
     "quality": "reported",
     "raw": "17.9",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.168,
     "max": 0.168,
     "quality": "reported",
     "raw": "16.8",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 3,
     "max": 3,
     "quality": "reported",
     "raw": "2 cm wide PMMA 3 mm thick",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm wide PMMA 3 mm thick",
     "column": "Fuel Sample Material"
    },
    "spread_rate_mm_s": {
     "min": 0.013,
     "max": 0.026,
     "quality": "reported",
     "raw": "0.026 and 0.013",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA lists the spread rates 0.026 and 0.013 mm/s at the velocities 10 and 8 cm/s, in that order. The value here runs from the lowest to the highest.",
     "evidence": "M18 3 2.2 2 10 and 8 0.026 and 0.013 25.5 17.9 16.8",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "test_date": {
     "text": "2014-07-15",
     "quality": "reported",
     "raw": "7/15/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/45",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "M19",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 45,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "burn_time_s": {
     "min": 1542,
     "max": 1542,
     "quality": "reported",
     "raw": "25.7",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA gives 25.7 min; multiplied by 60.",
     "evidence": "M19 4 2.2 2 10 and 6 0.027 and 0.0159 25.7 19 17.4",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "co2_fraction_final": {
     "min": 0.016,
     "max": 0.016,
     "quality": "reported",
     "raw": "1.6",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 357,
     "max": 357,
     "quality": "reported",
     "raw": "357",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "it went out on its own at 5 cm/s",
     "column": "p. 117, printed page 109, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 117, printed page 109, Table A.4.",
     "evidence": "Burned with decreasing flows until it went out on its own at 5 cm/s",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 117, printed page 109, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 117, printed page 109, Table A.4. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "M19 170m 4-mm-thick, 2-cm, two- sided PMMA slab Integral 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 17,
     "levels": [
      5,
      7,
      10,
      14,
      17
     ],
     "quality": "reported",
     "raw": "10 17 14 10 7 5",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "4 mm thick 2 cm 2ide PMMA slab",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "4 mm thick 2 cm 2ide PMMA slab",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Miller",
     "quality": "reported",
     "raw": "Miller",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.19,
     "max": 0.19,
     "quality": "reported",
     "raw": "19",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.174,
     "max": 0.174,
     "quality": "reported",
     "raw": "17.4",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "4 mm thick 2 cm 2ide PMMA slab",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "4 mm thick 2 cm 2ide PMMA slab",
     "column": "Fuel Sample Material"
    },
    "spread_rate_mm_s": {
     "min": 0.0159,
     "max": 0.027,
     "quality": "reported",
     "raw": "0.027 and 0.0159",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA lists the spread rates 0.027 and 0.0159 mm/s at the velocities 10 and 6 cm/s, in that order. The value here runs from the lowest to the highest.",
     "evidence": "M19 4 2.2 2 10 and 6 0.027 and 0.0159 25.7 19 17.4",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "test_date": {
     "text": "2014-07-23",
     "quality": "reported",
     "raw": "7/23/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/46",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "M20",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 46,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "burn_time_s": {
     "min": 990,
     "max": 990,
     "quality": "reported",
     "raw": "16.5",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1. NASA gives 16.5 min; multiplied by 60.",
     "evidence": "M20 5 2.2 2 10 0.012 16.5 18 17.4",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "co2_fraction_final": {
     "min": 0.0075,
     "max": 0.0075,
     "quality": "reported",
     "raw": "0.75",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 157,
     "max": 157,
     "quality": "reported",
     "raw": "157",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "flame out after 3 more minutes",
     "column": "p. 117, printed page 109, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 117, printed page 109, Table A.4.",
     "evidence": "Flame took some time to establish, initially only on bottom of fuel; ignition at 10 cm/s (left 8 min) then flow down to 8 cm/s (flame out after 3 more minutes)",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 117, printed page 109, Table A.4",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 117, printed page 109, Table A.4. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "M20 172m 5-mm-thick PMMA, 2 cm wide Integral 1 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 8,
     "max": 10,
     "levels": [
      8,
      10
     ],
     "quality": "reported",
     "raw": "10 8",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "5 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "5 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Miller",
     "quality": "reported",
     "raw": "Miller",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "18",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.174,
     "max": 0.174,
     "quality": "reported",
     "raw": "17.4",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "sample_thickness_mm": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "5 mm thick PMMA 2 cm wide",
     "column": "Fuel Sample Material"
    },
    "spread_rate_mm_s": {
     "min": 0.012,
     "max": 0.012,
     "quality": "reported",
     "raw": "0.012",
     "column": "p. 65, printed page 57, Table 5.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 65, printed page 57, Table 5.1.",
     "evidence": "M20 5 2.2 2 10 0.012 16.5 18 17.4",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "test_date": {
     "text": "2014-08-01",
     "quality": "reported",
     "raw": "8/1/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/47",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O1",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 47,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0085,
     "max": 0.0085,
     "quality": "reported",
     "raw": "0.85",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 51,
     "max": 51,
     "quality": "reported",
     "raw": "51",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_speed_cm_s": {
     "min": 1,
     "max": 20,
     "levels": [
      1,
      2,
      5,
      10,
      20
     ],
     "quality": "reported",
     "raw": "20 10 5 2 1",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "very sooty long flame at high flows",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "Bracket test with decreasing flows; very sooty long flame at high flows; rod very thinned out and was wobbling due to vapor jetting later in test; Rick broke it off holder during readjustments",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.222,
     "max": 0.222,
     "quality": "reported",
     "raw": "22.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.217,
     "max": 0.217,
     "quality": "reported",
     "raw": "21.7",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-02-18",
     "quality": "reported",
     "raw": "2/18/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/48",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O2",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 48,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0059,
     "max": 0.0059,
     "quality": "reported",
     "raw": "0.59",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 23,
     "max": 23,
     "quality": "reported",
     "raw": "23",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Ignited at 2 cm/s, and got dim flame",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "Ignited at 2 cm/s, and got dim flame that got sooty with lots of vapor jetting, reduced flow to 1.5 pot and got less vapor jetting test; still sooty at these low flows",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.222,
     "max": 0.222,
     "quality": "reported",
     "raw": "22.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.219,
     "max": 0.219,
     "quality": "reported",
     "raw": "21.9",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-02-18",
     "quality": "reported",
     "raw": "2/18/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/49",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O3a",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 49,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0028,
     "max": 0.0028,
     "quality": "reported",
     "raw": "0.28",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 22,
     "max": 22,
     "quality": "reported",
     "raw": "22",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Flame extinguished as soon as he turned flow down",
     "column": "p. 119, printed page 111, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 119, printed page 111, Table A.5.",
     "evidence": "Flame extinguished as soon as he turned flow down, probably overshot, flame sooty at 5 cm/s",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 119, printed page 111, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 119, printed page 111, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O3a 205M 6.35-mm clear rod –23 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 3,
     "max": 5,
     "levels": [
      3,
      5
     ],
     "quality": "reported",
     "raw": "5 3",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "18",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "18",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-06-13",
     "quality": "reported",
     "raw": "6/13/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/50",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O3b",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 50,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0053,
     "max": 0.0053,
     "quality": "reported",
     "raw": "0.53",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 116,
     "max": 116,
     "quality": "reported",
     "raw": "116",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 119, printed page 111, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 119, printed page 111, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O3b 205M 6.35-mm clear rod –23 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 1,
     "max": 5,
     "levels": [
      1,
      2,
      3,
      5
     ],
     "approx": true,
     "quality": "reported",
     "raw": "5 3 2 1 low",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: low.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Flame sooty even at lower flows",
     "column": "p. 119, printed page 111, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 119, printed page 111, Table A.5. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "Flame sooty even at lower flows, didn't get blue until air reading was zero",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "18",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.177,
     "max": 0.177,
     "quality": "reported",
     "raw": "17.7",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-06-13",
     "quality": "reported",
     "raw": "6/13/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/51",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O4",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 51,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0172,
     "max": 0.0172,
     "quality": "reported",
     "raw": "1.72",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "text": "OR",
     "quality": "reported",
     "raw": "OR",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "extinguished at 0.36",
     "column": "p. 119, printed page 111, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 119, printed page 111, Table A.5. NASA's file PSI-25_Experimental table_BASS-II.csv gives the same. NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same.",
     "evidence": "Larger rod, decreased flow, extinguished at 0.36, HCl 9.7",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "stagnation",
     "quality": "reported",
     "raw": "Stagnation",
     "column": "p. 119, printed page 111, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 119, printed page 111, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O4 216m 9.525-mm clear rod –32 2 Stagnation",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "approx": true,
     "quality": "reported",
     "raw": "5 down to ext",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: down to ext.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "3/8\"clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "3/8\"clear rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.148,
     "max": 0.148,
     "quality": "reported",
     "raw": "14.8",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.136,
     "max": 0.136,
     "quality": "reported",
     "raw": "13.6",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 9.525,
     "max": 9.525,
     "quality": "reported",
     "raw": "3/8\"clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-08",
     "quality": "reported",
     "raw": "7/8/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/52",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O5a",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 52,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0105,
     "max": 0.0105,
     "quality": "reported",
     "raw": "1.05",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 496,
     "max": 496,
     "quality": "reported",
     "raw": "496",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "blowoff",
     "quality": "reported",
     "raw": "blew out with pot of 4.0, tried to stay lit but blew off after multiple oscillations",
     "column": "p. 119, printed page 111, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 119, printed page 111, Table A.5.",
     "evidence": "Hard to ignite, broke two igniters, burned for 9 min then blew out with pot of 4.0, tried to stay lit but blew off after multiple oscillations.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 119, printed page 111, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 119, printed page 111, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O5a 220m 12.7-mm clear pmma rod –41, –42, – 30 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 10,
     "levels": [
      0,
      2,
      5,
      10
     ],
     "approx": true,
     "quality": "reported",
     "raw": "5 10 5 2 0 (49 62 49 44 42)",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "1/2\" clear PMMA rod",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/2\" clear PMMA rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.151,
     "max": 0.151,
     "quality": "reported",
     "raw": "15.1",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.142,
     "max": 0.142,
     "quality": "reported",
     "raw": "14.2",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 12.7,
     "max": 12.7,
     "quality": "reported",
     "raw": "1/2\" clear PMMA rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-21",
     "quality": "reported",
     "raw": "7/21/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/53",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O5b",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 53,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0114,
     "max": 0.0114,
     "quality": "reported",
     "raw": "1.14",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 590,
     "max": 590,
     "quality": "reported",
     "raw": "590",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 119, printed page 111, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 119, printed page 111, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O5b 220m 12.7-mm clear pmma rod –30 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "approx": true,
     "quality": "reported",
     "raw": "49 5 cm/s",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: 49.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "1/2\" clear PMMA rod",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/2\" clear PMMA rod",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "Would not sustain a flame without igniter on",
     "column": "p. 119, printed page 111, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 119, printed page 111, Table A.5. NASA's observation says the sample did not ignite or keep a flame.",
     "evidence": "Would not sustain a flame without igniter on, broke igniter again",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.142,
     "max": 0.142,
     "quality": "reported",
     "raw": "14.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.141,
     "max": 0.141,
     "quality": "reported",
     "raw": "14.1",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 12.7,
     "max": 12.7,
     "quality": "reported",
     "raw": "1/2\" clear PMMA rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-21",
     "quality": "reported",
     "raw": "7/21/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/54",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O6",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 54,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0074,
     "max": 0.0074,
     "quality": "reported",
     "raw": "0.74",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 232,
     "max": 232,
     "quality": "reported",
     "raw": "232",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "5   .36  .32  .31  .305   out .275",
     "column": "row 54, column Fan display",
     "note": "From NASA's file PSI-25_Experimental table_BASS-II.csv, row 54, column Fan display. NASA's remark in this cell is \"out\". NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same."
    },
    "flow_direction": {
     "text": "stagnation",
     "quality": "reported",
     "raw": "Stagnation",
     "column": "p. 119, printed page 111, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 119, printed page 111, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O6 206M 6.35-mm clear rod –24 2 Stagnation",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "text": "see fan",
     "quality": "reported",
     "raw": "see fan",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.167,
     "max": 0.167,
     "quality": "reported",
     "raw": "16.7",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.16,
     "max": 0.16,
     "quality": "reported",
     "raw": "16",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-06-26",
     "quality": "reported",
     "raw": "6/26/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/55",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O7",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 55,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0127,
     "max": 0.0127,
     "quality": "reported",
     "raw": "1.27",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 512,
     "max": 512,
     "quality": "reported",
     "raw": "512",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "blowoff",
     "quality": "reported",
     "raw": "Blowoff fan 97",
     "column": "p. 119, printed page 111, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 119, printed page 111, Table A.5. NASA's file PSI-25_Experimental table_BASS-II.csv gives the same. NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same.",
     "evidence": "Blowoff fan 97, HCl post 4.9",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "stagnation",
     "quality": "reported",
     "raw": "Stagnation",
     "column": "p. 119, printed page 111, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 119, printed page 111, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O7 214m 6.35-mm clear rod –24 2 Stagnation",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.16,
     "max": 0.16,
     "quality": "reported",
     "raw": "16",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.155,
     "max": 0.155,
     "quality": "reported",
     "raw": "15.5",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-06-26",
     "quality": "reported",
     "raw": "6/26/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/56",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O8a",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 56,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0144,
     "max": 0.0144,
     "quality": "reported",
     "raw": "1.44",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 536,
     "max": 536,
     "quality": "reported",
     "raw": "536",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Quench at pot 0.31",
     "column": "p. 119, printed page 111, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 119, printed page 111, Table A.5. NASA's file PSI-25_Experimental table_BASS-II.csv gives the same. NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same.",
     "evidence": "Quench at pot 0.31, HCL 4.8 to 5.9",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "stagnation",
     "quality": "reported",
     "raw": "Stagnation",
     "column": "p. 119, printed page 111, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 119, printed page 111, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O8a 208m 6.35-mm clear rod –24 2 Stagnation",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.157,
     "max": 0.157,
     "quality": "reported",
     "raw": "15.7",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.153,
     "max": 0.153,
     "quality": "reported",
     "raw": "15.3",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-06-26",
     "quality": "reported",
     "raw": "6/26/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/57",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O8b",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 57,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0174,
     "max": 0.0174,
     "quality": "reported",
     "raw": "1.74",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 660,
     "max": 660,
     "quality": "reported",
     "raw": "660",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "blowoff",
     "quality": "reported",
     "raw": "Blowoff fan 78",
     "column": "p. 119, printed page 111, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 119, printed page 111, Table A.5. NASA's file PSI-25_Experimental table_BASS-II.csv gives the same. NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same.",
     "evidence": "Blowoff fan 78, HCl prepost 5.9 to 7.9",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "stagnation",
     "quality": "reported",
     "raw": "Stagnation",
     "column": "p. 119, printed page 111, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 119, printed page 111, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O8b 208m 6.35-mm clear rod –24 2 Stagnation",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.155,
     "max": 0.155,
     "quality": "reported",
     "raw": "15.5",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.152,
     "max": 0.152,
     "quality": "reported",
     "raw": "15.2",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-06-26",
     "quality": "reported",
     "raw": "6/26/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/58",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O9",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 58,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0196,
     "max": 0.0196,
     "quality": "reported",
     "raw": "1.96",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 794,
     "max": 794,
     "quality": "reported",
     "raw": "794",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "blowoff",
     "quality": "reported",
     "raw": "Blowoff fan 68",
     "column": "p. 119, printed page 111, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 119, printed page 111, Table A.5. NASA's file PSI-25_Experimental table_BASS-II.csv gives the same. NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same.",
     "evidence": "Blowoff fan 68, HCl 7.5 to 9.3",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "stagnation",
     "quality": "reported",
     "raw": "Stagnation",
     "column": "p. 119, printed page 111, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 119, printed page 111, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O9 209m 6.35-mm clear rod –24 2 Stagnation",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "15",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.148,
     "max": 0.148,
     "quality": "reported",
     "raw": "14.8",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-06-26",
     "quality": "reported",
     "raw": "6/26/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/59",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O10",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 59,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.021,
     "max": 0.021,
     "quality": "reported",
     "raw": "2.1",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 287,
     "max": 287,
     "quality": "reported",
     "raw": "287",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "blowoff",
     "quality": "reported",
     "raw": "Leading edge (LE) blew out at fan 81, 25 s for rest of flame to blowoff at maximum flow",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5.",
     "evidence": "Leading edge (LE) blew out at fan 81, 25 s for rest of flame to blowoff at maximum flow",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O10 210m 6.35-mm clear rod –31 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 5,
     "levels": [
      0,
      2,
      5
     ],
     "approx": true,
     "quality": "reported",
     "raw": "5 2 0 max",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: max.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.167,
     "max": 0.167,
     "quality": "reported",
     "raw": "16.7",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.161,
     "max": 0.161,
     "quality": "reported",
     "raw": "16.1",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-22",
     "quality": "reported",
     "raw": "7/22/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/60",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O11",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 60,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0072,
     "max": 0.0072,
     "quality": "reported",
     "raw": "0.72",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 290,
     "max": 290,
     "quality": "reported",
     "raw": "290",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "blowoff",
     "quality": "reported",
     "raw": "blowoff at pot of 6.0",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. NASA's file PSI-25_Experimental table_BASS-II.csv gives the same. NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same.",
     "evidence": "Repeat of clear rod O8b test, to compare black versus clear for stagnation flame, blowoff at pot of 6.0, fan slightly higher than O8b, HCl 2.8",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "stagnation",
     "quality": "reported",
     "raw": "Stagnation",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O11 184m 6.35-mm black rod –32 2 Stagnation",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "approx": true,
     "quality": "reported",
     "raw": "5 down then blowoff",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: down then blowoff.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.154,
     "max": 0.154,
     "quality": "reported",
     "raw": "15.4",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.148,
     "max": 0.148,
     "quality": "reported",
     "raw": "14.8",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-08",
     "quality": "reported",
     "raw": "7/8/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/61",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O12",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 61,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0171,
     "max": 0.0171,
     "quality": "reported",
     "raw": "1.71",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "text": "OR",
     "quality": "reported",
     "raw": "OR",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "stagnation",
     "quality": "reported",
     "raw": "Stagnation",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O12 217m 9.525-mm clear rod –32 2 Stagnation",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "text": "no ign at any flow",
     "quality": "reported",
     "raw": "no ign at any flow",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "3/8\" clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "3/8\" clear rod",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No sustained flame at any flow",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. NASA's observation says the sample did not ignite or keep a flame. NASA's file PSI-25_Experimental table_BASS-II.csv gives the same. NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same.",
     "evidence": "No sustained flame at any flow, flame with igniter but died immediately upon igniter removal, HCL 12.3",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.136,
     "max": 0.136,
     "quality": "reported",
     "raw": "13.6",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.135,
     "max": 0.135,
     "quality": "reported",
     "raw": "13.5",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 9.525,
     "max": 9.525,
     "quality": "reported",
     "raw": "3/8\" clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-08",
     "quality": "reported",
     "raw": "7/8/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/62",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O13a",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 62,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0185,
     "max": 0.0185,
     "quality": "reported",
     "raw": "1.85",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 950,
     "max": 950,
     "quality": "reported",
     "raw": "950",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "flame self-extinguished after 3+ min at pot 0.31",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5.",
     "evidence": "Ignited and burned at 5 pot settings, flame self-extinguished after 3+ min at pot 0.31",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O13a 221m 12.7-mm clear PMMA rod –29 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "text": "49 44 42 41 41 40.5 (5 2 0)",
     "quality": "reported",
     "raw": "49 44 42 41 41 40.5 (5 2 0)",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. No speed is read from this cell: the cell holds two lists of numbers and does not say which is the air speed.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "1/2\" clear PMMA rod",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/2\" clear PMMA rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.159,
     "max": 0.159,
     "quality": "reported",
     "raw": "15.9",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.146,
     "max": 0.146,
     "quality": "reported",
     "raw": "14.6",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 12.7,
     "max": 12.7,
     "quality": "reported",
     "raw": "1/2\" clear PMMA rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-21",
     "quality": "reported",
     "raw": "7/21/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/63",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O13b",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 63,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0209,
     "max": 0.0209,
     "quality": "reported",
     "raw": "2.09",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "text": "over",
     "quality": "reported",
     "raw": "over",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Only stayed lit at 0.9 for less than a minute",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. NASA says the flame \"only stayed lit ... for less than a minute\". Read as: it went out.",
     "evidence": "Only stayed lit at 0.9 for less than a minute",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O13b 221m 12.7-mm clear PMMA rod –29 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 4,
     "max": 7,
     "levels": [
      4,
      7
     ],
     "approx": true,
     "quality": "reported",
     "raw": "7 4? (49 ?)",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "1/2\" clear PMMA rod",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/2\" clear PMMA rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.146,
     "max": 0.146,
     "quality": "reported",
     "raw": "14.6",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.144,
     "max": 0.144,
     "quality": "reported",
     "raw": "14.4",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 12.7,
     "max": 12.7,
     "quality": "reported",
     "raw": "1/2\" clear PMMA rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-21",
     "quality": "reported",
     "raw": "7/21/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/64",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O14",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 64,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0086,
     "max": 0.0086,
     "quality": "reported",
     "raw": "0.86",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 352,
     "max": 352,
     "quality": "reported",
     "raw": "352",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "slow pot decreases to quenching pot 0.28",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. NASA's file PSI-25_Experimental table_BASS-II.csv gives the same. NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same.",
     "evidence": "Ignition at 5 cm/s then slow pot decreases to quenching pot 0.28",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O14 183m 6.35-mm black rod 39 1 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "approx": true,
     "quality": "reported",
     "raw": "5 down to ext",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: down to ext.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.163,
     "max": 0.163,
     "quality": "reported",
     "raw": "16.3",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.153,
     "max": 0.153,
     "quality": "reported",
     "raw": "15.3",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-08-01",
     "quality": "reported",
     "raw": "8/1/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/65",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O15a",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 65,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0062,
     "max": 0.0062,
     "quality": "reported",
     "raw": "0.62",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 176,
     "max": 176,
     "quality": "reported",
     "raw": "176",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Decrease flow to extinction at 0.32 pot",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5.",
     "evidence": "Decrease flow to extinction at 0.32 pot, from 0.35 pot. 1.5 min at 5 cm/s; 2.5 min pot 1.0; 3.5 min at 0.5; 3.5 min 0.35; slow turn down to 0.32, flame out fairly quickly",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "stagnation",
     "quality": "reported",
     "raw": "Stagnation",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O15a 218m 9.525-mm clear rod –31 2 Stagnation",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 5,
     "levels": [
      0,
      5
     ],
     "quality": "reported",
     "raw": "5 0",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "3/8\" clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "3/8\" clear rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.171,
     "max": 0.171,
     "quality": "reported",
     "raw": "17.1",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.167,
     "max": 0.167,
     "quality": "reported",
     "raw": "16.7",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 9.525,
     "max": 9.525,
     "quality": "reported",
     "raw": "3/8\" clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-28",
     "quality": "reported",
     "raw": "7/28/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/66",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O15b",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 66,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0163,
     "max": 0.0163,
     "quality": "reported",
     "raw": "1.63",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 751,
     "max": 751,
     "quality": "reported",
     "raw": "751",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "decreased flow to extinction at 0.27 pot",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5.",
     "evidence": "Reburn of same rod as previous; decreased flow to extinction at 0.27 pot, much lower than previous; rod heatup effect? 1 min 5 cm/s; 3.5 min pot 0.5; 5 min 0.35; 4 min 0.34; 4 min 0.33; 3 min 0.32; 1 min 0.31; 1 min 0.3; 1 min 0.29; 1.5 min 0.28; 0.27 out",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "stagnation",
     "quality": "reported",
     "raw": "Stagnation",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O15b 218m 9.525-mm clear rod –31 2 Stagnation",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 5,
     "levels": [
      0,
      5
     ],
     "quality": "reported",
     "raw": "5 0",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "3/8\" clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "3/8\" clear rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.167,
     "max": 0.167,
     "quality": "reported",
     "raw": "16.7",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.156,
     "max": 0.156,
     "quality": "reported",
     "raw": "15.6",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 9.525,
     "max": 9.525,
     "quality": "reported",
     "raw": "3/8\" clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-28",
     "quality": "reported",
     "raw": "7/28/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/67",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O16",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 67,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0032,
     "max": 0.0032,
     "quality": "reported",
     "raw": "0.32",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 33,
     "max": 33,
     "quality": "reported",
     "raw": "33",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "stagnation",
     "quality": "reported",
     "raw": "Stagnation",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O16 219m 9.525-mm clear rod –31 2 Stagnation",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "3/8\"clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "3/8\"clear rod",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "no joy on sustained flame",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. NASA's observation says the sample did not ignite or keep a flame.",
     "evidence": "Brief flame at end of first ignition, but no joy on sustained flame",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.145,
     "max": 0.145,
     "quality": "reported",
     "raw": "14.5",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.145,
     "max": 0.145,
     "quality": "reported",
     "raw": "14.5",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 9.525,
     "max": 9.525,
     "quality": "reported",
     "raw": "3/8\"clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-29",
     "quality": "reported",
     "raw": "7/29/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/68",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O17",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 68,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.009,
     "max": 0.009,
     "quality": "reported",
     "raw": "0.9",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 377,
     "max": 377,
     "quality": "reported",
     "raw": "377",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "blowoff",
     "quality": "reported",
     "raw": "LE blowoff at fan 72 and turned down flow but flame did not recover and extinguished",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. The leading edge blew off at fan 72, the flow was turned down, and the flame still went out. Read as a blow-off.",
     "evidence": "Stable burns at slightly higher flows, LE blowoff at fan 72 and turned down flow but flame did not recover and extinguished even after flow was down to 43-44",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O17 211m 6.35-mm clear rod –31 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 11,
     "levels": [
      0,
      3,
      11
     ],
     "quality": "reported",
     "raw": "3 0 11",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.151,
     "max": 0.151,
     "quality": "reported",
     "raw": "15.1",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.143,
     "max": 0.143,
     "quality": "reported",
     "raw": "14.3",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-22",
     "quality": "reported",
     "raw": "7/22/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/69",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O18",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 69,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0194,
     "max": 0.0194,
     "quality": "reported",
     "raw": "1.94",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 816,
     "max": 816,
     "quality": "reported",
     "raw": "816",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "blowoff",
     "quality": "reported",
     "raw": "stag region blew out, Alex turned down quickly to 1.5 and got it to restabilize; we repeated it but it would not restabilize second time and flame extinguished after multiple oscillations at pot 1.0",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. The stagnation region blew out twice at pot 4.0; the second time the flame did not recover. Read as a blow-off.",
     "evidence": "Got rod hot, blue flame, turned flow up to pot 4.0, stag region blew out, Alex turned down quickly to 1.5 and got it to restabilize; we repeated it but it would not restabilize second time and flame extinguished after multiple oscillations at pot 1.0, after 1.5 would not restabilize",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "stagnation",
     "quality": "reported",
     "raw": "Stagnation",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O18 212m 6.35-mm clear rod –31 2 Stagnation",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 11,
     "levels": [
      0,
      2,
      5,
      11
     ],
     "quality": "reported",
     "raw": "5 2 0 11 2 11 2 0",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.152,
     "max": 0.152,
     "quality": "reported",
     "raw": "15.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.145,
     "max": 0.145,
     "quality": "reported",
     "raw": "14.5",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-28",
     "quality": "reported",
     "raw": "7/28/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/70",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O19",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 70,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0151,
     "max": 0.0151,
     "quality": "reported",
     "raw": "1.51",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 686,
     "max": 686,
     "quality": "reported",
     "raw": "686",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "slow pot decreases to quenching pot 0.288",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. NASA's file PSI-25_Experimental table_BASS-II.csv gives the same. NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same.",
     "evidence": "Ignition at 5 cm/s then slow pot decreases to quenching pot 0.288",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 118, printed page 110, Table A.5",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 118, printed page 110, Table A.5. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "O19 213m 6.35-mm clear rod 39 1 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "approx": true,
     "quality": "reported",
     "raw": "5 down to ext",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: down to ext.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.153,
     "max": 0.153,
     "quality": "reported",
     "raw": "15.3",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.146,
     "max": 0.146,
     "quality": "reported",
     "raw": "14.6",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-08-01",
     "quality": "reported",
     "raw": "8/1/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/71",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O20",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 71,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0057,
     "max": 0.0057,
     "quality": "reported",
     "raw": "0.57",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 57,
     "max": 57,
     "quality": "reported",
     "raw": "57",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 38.5,
     "levels": [
      5,
      8,
      38.5
     ],
     "approx": true,
     "quality": "reported",
     "raw": "5 8 incr to max 38.5",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: incr to max.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.165,
     "max": 0.165,
     "quality": "reported",
     "raw": "16.5",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.159,
     "max": 0.159,
     "quality": "reported",
     "raw": "15.9",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2016-02-26",
     "quality": "reported",
     "raw": "2/26/2016",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/72",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O21",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 72,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0095,
     "max": 0.0095,
     "quality": "reported",
     "raw": "0.95",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 187,
     "max": 187,
     "quality": "reported",
     "raw": "187",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_speed_cm_s": {
     "min": 28,
     "max": 28,
     "approx": true,
     "quality": "reported",
     "raw": "incr to 28",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: incr to.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "3/8\" clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "3/8\" clear rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.159,
     "max": 0.159,
     "quality": "reported",
     "raw": "15.9",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.154,
     "max": 0.154,
     "quality": "reported",
     "raw": "15.4",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 9.525,
     "max": 9.525,
     "quality": "reported",
     "raw": "3/8\" clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2016-02-26",
     "quality": "reported",
     "raw": "2/26/2016",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/73",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "O22",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 73,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0133,
     "max": 0.0133,
     "quality": "reported",
     "raw": "1.33",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 322,
     "max": 322,
     "quality": "reported",
     "raw": "322",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "blowoff",
     "quality": "reported",
     "raw": "49 (pot 1.1)   blowoff pot 5   out at fan 87",
     "column": "row 73, column Fan display",
     "note": "From NASA's file PSI-25_Experimental table_BASS-II.csv, row 73, column Fan display. NASA's remark in this cell is \"blowoff\". NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same."
    },
    "flow_speed_cm_s": {
     "min": 4,
     "max": 26.5,
     "levels": [
      4,
      26.5
     ],
     "approx": true,
     "quality": "reported",
     "raw": "4 incr to 26.5",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: incr to.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/2\" clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/2\" clear rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Olson",
     "quality": "reported",
     "raw": "Olson",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.154,
     "max": 0.154,
     "quality": "reported",
     "raw": "15.4",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.149,
     "max": 0.149,
     "quality": "reported",
     "raw": "14.9",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 12.7,
     "max": 12.7,
     "quality": "reported",
     "raw": "1/2\" clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2016-02-26",
     "quality": "reported",
     "raw": "2/26/2016",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/74",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P1",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 74,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0044,
     "max": 0.0044,
     "quality": "reported",
     "raw": "0.44",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 14,
     "max": 14,
     "quality": "reported",
     "raw": "14",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "got down to extinction at pot 0.315 (finite low flow)",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3. NASA's file PSI-25_Experimental table_BASS-II.csv gives the same. NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same.",
     "evidence": "Broke –20, –21 igniters, –22 worked; nice flame, got down to extinction at pot 0.315 (finite low flow), very slow increments",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P1 185m 6.35-mm black rod –22 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 2,
     "max": 5,
     "levels": [
      2,
      5
     ],
     "approx": true,
     "quality": "reported",
     "raw": "5 2 slow decr to ext",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: slow decr to ext.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.177,
     "max": 0.177,
     "quality": "reported",
     "raw": "17.7",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.175,
     "max": 0.175,
     "quality": "reported",
     "raw": "17.5",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-06-16",
     "quality": "reported",
     "raw": "6/16/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/75",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P2",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 75,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0066,
     "max": 0.0066,
     "quality": "reported",
     "raw": "0.66",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 26,
     "max": 26,
     "quality": "reported",
     "raw": "26",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "did not get extinction on stills, but was just fan off, not slow ramp",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3. NASA's observation says the crew turned the air flow off to end the burn.",
     "evidence": "Nice stable burn at low velocity, mostly blue with some inner soot at higher flow, stable flame at pot 0.33, did not get extinction on stills, but was just fan off, not slow ramp",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P2 188M 6.35-mm black rod –22 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 2,
     "max": 5,
     "levels": [
      2,
      2.5,
      5
     ],
     "quality": "reported",
     "raw": "5 2.5 2 (pot .9 .5 .35. .33)",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.174,
     "max": 0.174,
     "quality": "reported",
     "raw": "17.4",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.172,
     "max": 0.172,
     "quality": "reported",
     "raw": "17.2",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-06-16",
     "quality": "reported",
     "raw": "6/16/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/76",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P3a",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 76,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0051,
     "max": 0.0051,
     "quality": "reported",
     "raw": "0.51",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 33,
     "max": 33,
     "quality": "reported",
     "raw": "33",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "extinguished at 0.3 pot",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3.",
     "evidence": "Repeat of last test with clear rod; extinguished at 0.3 pot very small flame, but steady spread",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P3a 215M 6.35-mm clear rod –22 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 2.5,
     "max": 5,
     "levels": [
      2.5,
      5
     ],
     "approx": true,
     "quality": "reported",
     "raw": "5 2.5 (1.15 .5 .35 .33. .32 .315 .31 .3)",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.177,
     "max": 0.177,
     "quality": "reported",
     "raw": "17.7",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.174,
     "max": 0.174,
     "quality": "reported",
     "raw": "17.4",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-06-16",
     "quality": "reported",
     "raw": "6/16/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/77",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P3b",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 77,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co_ppm_final": {
     "min": 79,
     "max": 79,
     "quality": "reported",
     "raw": "79",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P3b 215M 6.35-mm clear rod –22 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "approx": true,
     "quality": "reported",
     "raw": "5 very low (0.85 0.32 0.31 0.305 0.30 0.295)",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: very low.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4 clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4 clear rod",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "pot 0.32 spread, 0.31 spread",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "Very low velocity test to get limiting spread rate, pot 0.32 spread, 0.31 spread, etc.; power failed to camera?; fan still running; camera power cable needed repair and taping to camera body to make it work",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.174,
     "max": 0.174,
     "quality": "reported",
     "raw": "17.4",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.168,
     "max": 0.168,
     "quality": "reported",
     "raw": "16.8",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4 clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-06-16",
     "quality": "reported",
     "raw": "6/16/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/78",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P4",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 78,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.018,
     "max": 0.018,
     "quality": "reported",
     "raw": "1.8",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 493,
     "max": 493,
     "quality": "reported",
     "raw": "493",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "steady at multiple pots until turned off flow",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3. NASA's observation says the crew turned the air flow off to end the burn.",
     "evidence": "HCl 0.9 > 1.8, long slow burn, steady at multiple pots until turned off flow",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P4 197m 9.525-mm black rod –35 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "approx": true,
     "quality": "reported",
     "raw": "5 pots 0.4 0.36 0.32 0.308 .3 off",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "3/8\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "3/8\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.185,
     "max": 0.185,
     "quality": "reported",
     "raw": "18.5",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.171,
     "max": 0.171,
     "quality": "reported",
     "raw": "17.1",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 9.525,
     "max": 9.525,
     "quality": "reported",
     "raw": "3/8\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-03",
     "quality": "reported",
     "raw": "7/3/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/79",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P5",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 79,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0167,
     "max": 0.0167,
     "quality": "reported",
     "raw": "1.67",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 525,
     "max": 525,
     "quality": "reported",
     "raw": "525",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "finally turned down flow to 0 to extinguish",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3. NASA's observation says the crew turned the air flow off to end the burn. NASA's file PSI-25_Experimental table_BASS-II.csv gives \"extinction\" (row 79, column Air display). NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives \"extinction\" (Fernandez-Pello!H7).",
     "evidence": "Fan pot 1.5 (5 cm/s), 0.9, 0.4, 0.36, 0.32, 0.308, 0.3, 0.29, 0.28 (flame persisted for all) finally turned down flow to 0 to extinguish; HCL 0 > 4.7; lots of fuel left behind, conical shape",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P5 202m 12.7-mm black rod –37 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "approx": true,
     "quality": "reported",
     "raw": "5 down to ext",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: down to ext.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "0.5\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "0.5\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.193,
     "max": 0.193,
     "quality": "reported",
     "raw": "19.3",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.176,
     "max": 0.176,
     "quality": "reported",
     "raw": "17.6",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 12.7,
     "max": 12.7,
     "quality": "reported",
     "raw": "0.5\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-14",
     "quality": "reported",
     "raw": "7/14/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/80",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P6",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 80,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0062,
     "max": 0.0062,
     "quality": "reported",
     "raw": "0.62",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 64,
     "max": 64,
     "quality": "reported",
     "raw": "64",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "steady burning until turned flow off",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3. NASA's observation says the crew turned the air flow off to end the burn.",
     "evidence": "HCl 0 > 0.9, steady burning until turned flow off, multiple pot settings",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P6 186m 6.35-mm black rod –35 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "approx": true,
     "quality": "reported",
     "raw": "5 pots 0.4 0.36 0.32 0.31 off",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.189,
     "max": 0.189,
     "quality": "reported",
     "raw": "18.9",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.185,
     "max": 0.185,
     "quality": "reported",
     "raw": "18.5",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-03",
     "quality": "reported",
     "raw": "7/3/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/81",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P8",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 81,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0081,
     "max": 0.0081,
     "quality": "reported",
     "raw": "0.81",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 69,
     "max": 69,
     "quality": "reported",
     "raw": "69",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P8 197m 9.525-mm black rod –35 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 15,
     "levels": [
      5,
      10,
      15
     ],
     "approx": true,
     "quality": "reported",
     "raw": "5 would not stay lit 10 15 ibid",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: would not stay lit ibid.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "3/8\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "3/8\" black rod",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "would not stay lit",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3. NASA's observation says the sample did not ignite or keep a flame. NASA's file PSI-25_Experimental table_BASS-II.csv gives the same. NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same.",
     "evidence": "HCl 0.9 > 0.9, would not stay lit, tip of sample was flat",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.164,
     "max": 0.164,
     "quality": "reported",
     "raw": "16.4",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.163,
     "max": 0.163,
     "quality": "reported",
     "raw": "16.3",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 9.525,
     "max": 9.525,
     "quality": "reported",
     "raw": "3/8\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-03",
     "quality": "reported",
     "raw": "7/3/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/82",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P9",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 82,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.021,
     "max": 0.021,
     "quality": "reported",
     "raw": "2.1",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 535,
     "max": 535,
     "quality": "reported",
     "raw": "535",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "flame out at 0.28",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3. NASA's file PSI-25_Experimental table_BASS-II.csv gives the same. NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same.",
     "evidence": "Fan pot 1.5 (5 cm/s), 0.9, 0.4, 0.36, 0.32, 0.3, 0.28 flame out at 0.28; HCL 4.7 > 4.5; flame did not leave conical portion behind, rather fuel was consumed but final sample shape was very irregular",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P9 202m 12.7-mm black rod –37 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "approx": true,
     "quality": "reported",
     "raw": "5 down to ext",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: down to ext.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "0.5\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "0.5\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.176,
     "max": 0.176,
     "quality": "reported",
     "raw": "17.6",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.171,
     "max": 0.171,
     "quality": "reported",
     "raw": "17.1",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 12.7,
     "max": 12.7,
     "quality": "reported",
     "raw": "0.5\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-14",
     "quality": "reported",
     "raw": "7/14/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/83",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P10",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 83,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0072,
     "max": 0.0072,
     "quality": "reported",
     "raw": "0.72",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 44,
     "max": 44,
     "quality": "reported",
     "raw": "44",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "finite quench at pot 0.3",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3. NASA's file PSI-25_Experimental table_BASS-II.csv gives the same. NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same.",
     "evidence": "HCl 0.3 > 0.9, steady burn at multiple velocities, finite quench at pot 0.3",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P10 187m 6.35-mm black rod –35 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "approx": true,
     "quality": "reported",
     "raw": "5 pots 0.4 0.36 0.32 0.31 0.30 extinguished",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "17",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.164,
     "max": 0.164,
     "quality": "reported",
     "raw": "16.4",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-03",
     "quality": "reported",
     "raw": "7/3/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/84",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P12",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 84,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0095,
     "max": 0.0095,
     "quality": "reported",
     "raw": "0.95",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 57,
     "max": 57,
     "quality": "reported",
     "raw": "57",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "out immediately at 0.34",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3.",
     "evidence": "Loss of signal before extinguished, oscillating at 0.36, out immediately at 0.34, multiple steady spread flows",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P12 199m 9.525-mm black rod –36 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 0.5,
     "max": 5,
     "levels": [
      0.5,
      1,
      2,
      3,
      5
     ],
     "approx": true,
     "quality": "reported",
     "raw": "5 3 2 1 0.5 lower",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: lower.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "3/8\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "3/8\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.175,
     "max": 0.175,
     "quality": "reported",
     "raw": "17.5",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.168,
     "max": 0.168,
     "quality": "reported",
     "raw": "16.8",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 9.525,
     "max": 9.525,
     "quality": "reported",
     "raw": "3/8\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-29",
     "quality": "reported",
     "raw": "7/29/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/85",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P13a",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 85,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0163,
     "max": 0.0163,
     "quality": "reported",
     "raw": "1.63",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 450,
     "max": 450,
     "quality": "reported",
     "raw": "450",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "flame out when pot turned to 0",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3. NASA's observation says the crew turned the air flow off to end the burn. NASA's file PSI-25_Experimental table_BASS-II.csv gives \"extinction\" (row 85, column Air display). NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives \"extinction\" (Fernandez-Pello!H13).",
     "evidence": "Fan pot 1.1 (5 cm/s), 0.4, 0.36, 0.32, 0.3, 0.28, 0.26; flame out when pot turned to 0; HCL 0.5 > 4.1; flame reached front of sample and began to wrap around",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P13a 203m 12.7-mm black rod –37 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "approx": true,
     "quality": "reported",
     "raw": "5 down to ext",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: down to ext.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "0.5\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "0.5\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.207,
     "max": 0.207,
     "quality": "reported",
     "raw": "20.7",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.191,
     "max": 0.191,
     "quality": "reported",
     "raw": "19.1",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 12.7,
     "max": 12.7,
     "quality": "reported",
     "raw": "0.5\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-14",
     "quality": "reported",
     "raw": "7/14/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/86",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P13b",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 86,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0062,
     "max": 0.0062,
     "quality": "reported",
     "raw": "0.62",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 72,
     "max": 72,
     "quality": "reported",
     "raw": "72",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "flame out when pot turned to 0.32",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3. NASA's file PSI-25_Experimental table_BASS-II.csv gives the same. NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same.",
     "evidence": "Fan pot 1.3 (5 cm/s), 0.4, 0.36, 0.32; flame out when pot turned to 0.32",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P13b 203m 12.7-mm black rod –37 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "approx": true,
     "quality": "reported",
     "raw": "5 down to ext",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: down to ext.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "0.5\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "0.5\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.206,
     "max": 0.206,
     "quality": "reported",
     "raw": "20.6",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.202,
     "max": 0.202,
     "quality": "reported",
     "raw": "20.2",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 12.7,
     "max": 12.7,
     "quality": "reported",
     "raw": "0.5\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-14",
     "quality": "reported",
     "raw": "7/14/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/87",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P14",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 87,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0062,
     "max": 0.0062,
     "quality": "reported",
     "raw": "0.62",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 90,
     "max": 90,
     "quality": "reported",
     "raw": "90",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "extinguished at 0.31",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3.",
     "evidence": "All blue, extinguished at 0.31",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P14 189M 6.35-mm black rod –22 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "approx": true,
     "quality": "reported",
     "raw": "5 low (.85 .4 .32)",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: low.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4 blac rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4 blac rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.184,
     "max": 0.184,
     "quality": "reported",
     "raw": "18.4",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "18",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4 blac rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-06-23",
     "quality": "reported",
     "raw": "6/23/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/88",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P15",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 88,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0111,
     "max": 0.0111,
     "quality": "reported",
     "raw": "1.11",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 108,
     "max": 108,
     "quality": "reported",
     "raw": "108",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P15 190M 6.35-mm black rod –22 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "approx": true,
     "quality": "reported",
     "raw": "5 (0.36)",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4 black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4 black rod",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Nice stable burn",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "Nice stable burn with sooty tail but blue leading edge",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "18",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.175,
     "max": 0.175,
     "quality": "reported",
     "raw": "17.5",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4 black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-06-23",
     "quality": "reported",
     "raw": "6/23/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/89",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P16",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 89,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0092,
     "max": 0.0092,
     "quality": "reported",
     "raw": "0.92",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 56,
     "max": 56,
     "quality": "reported",
     "raw": "56",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinguished at pot 0.32",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3.",
     "evidence": "Extinguished at pot 0.32, one high flow setting",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P16 191m 6.35-mm black rod –36 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 2,
     "max": 8,
     "levels": [
      2,
      5,
      8
     ],
     "approx": true,
     "quality": "reported",
     "raw": "5 8 2 low",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: low.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.182,
     "max": 0.182,
     "quality": "reported",
     "raw": "18.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.174,
     "max": 0.174,
     "quality": "reported",
     "raw": "17.4",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-22",
     "quality": "reported",
     "raw": "7/22/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/90",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P17",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 90,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0134,
     "max": 0.0134,
     "quality": "reported",
     "raw": "1.34",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 68,
     "max": 68,
     "quality": "reported",
     "raw": "68",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "oscillated and out at 0.34",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3.",
     "evidence": "A few finite flows, then tried blowoff without success, turned back down to 2 cm/s, then 0.36, 0.34 pots, oscillated and out at 0.34; leading edge receded slightly but did not blowoff",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P17 192m 6.35-mm rod –36 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 2,
     "max": 22,
     "levels": [
      2,
      3,
      5,
      22
     ],
     "approx": true,
     "quality": "reported",
     "raw": "5 3 2 22 2 low",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: low.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.168,
     "max": 0.168,
     "quality": "reported",
     "raw": "16.8",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.165,
     "max": 0.165,
     "quality": "reported",
     "raw": "16.5",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-29",
     "quality": "reported",
     "raw": "7/29/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/91",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P18",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 91,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.012,
     "max": 0.012,
     "quality": "reported",
     "raw": "1.2",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 26,
     "max": 26,
     "quality": "reported",
     "raw": "26",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "extinction at fan pot 0.32",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3.",
     "evidence": "Alternated fan pot between 1 and 2 at 1-min intervals to try to get time constant resolution; finally turned pot down slowly, extinction at fan pot 0.32",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P18 193m 6.35-mm black rod 36 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 2,
     "levels": [
      0,
      2
     ],
     "approx": true,
     "quality": "reported",
     "raw": "2 0 2 0 etc",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: etc.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "20",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.19,
     "max": 0.19,
     "quality": "reported",
     "raw": "19",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-30",
     "quality": "reported",
     "raw": "7/30/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/92",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P19",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 92,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0161,
     "max": 0.0161,
     "quality": "reported",
     "raw": "1.61",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 94,
     "max": 94,
     "quality": "reported",
     "raw": "94",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "flame out at 0.32",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3.",
     "evidence": "Tried blowoff, did not blowoff at pot 10 2 restrictors, flame out at 0.32, sample mostly gone",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P19 194m 6.35-mm black rod –36 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 8,
     "levels": [
      0,
      2,
      5,
      8
     ],
     "approx": true,
     "quality": "reported",
     "raw": "5 8 2 max 0",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: max.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.175,
     "max": 0.175,
     "quality": "reported",
     "raw": "17.5",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.167,
     "max": 0.167,
     "quality": "reported",
     "raw": "16.7",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-22",
     "quality": "reported",
     "raw": "7/22/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/93",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P20",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 93,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0105,
     "max": 0.0105,
     "quality": "reported",
     "raw": "1.05",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 78,
     "max": 78,
     "quality": "reported",
     "raw": "78",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "extinction at fan pot 0.335",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3.",
     "evidence": "Alternated fan pot between 1 and 2 at 1-min intervals to try to get time constant resolution; finally turned pot down slowly, extinction at fan pot 0.335",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P20 195m 6.35-mm black rod 36 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 2,
     "levels": [
      0,
      2
     ],
     "approx": true,
     "quality": "reported",
     "raw": "2 0 2 0 etc",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: etc.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.19,
     "max": 0.19,
     "quality": "reported",
     "raw": "19",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.182,
     "max": 0.182,
     "quality": "reported",
     "raw": "18.2",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-30",
     "quality": "reported",
     "raw": "7/30/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/94",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P21a",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 94,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.01,
     "max": 0.01,
     "quality": "reported",
     "raw": "1",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 94,
     "max": 94,
     "quality": "reported",
     "raw": "94",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "Flame self-extinguished at 5 cm/s",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3.",
     "evidence": "Flame self-extinguished at 5 cm/s after sample end became flat, dim flame",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P21a 196M 6.35-mm black rod –22 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4 black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4 black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.163,
     "max": 0.163,
     "quality": "reported",
     "raw": "16.3",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.163,
     "max": 0.163,
     "quality": "reported",
     "raw": "16.3",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4 black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-06-23",
     "quality": "reported",
     "raw": "6/23/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/95",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P21b",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 95,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0103,
     "max": 0.0103,
     "quality": "reported",
     "raw": "1.03",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 98,
     "max": 98,
     "quality": "reported",
     "raw": "98",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 114, printed page 106, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 114, printed page 106, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P21b 196M 6.35-mm black rod –22 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.163,
     "max": 0.163,
     "quality": "reported",
     "raw": "16.3",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.163,
     "max": 0.163,
     "quality": "reported",
     "raw": "16.3",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 6.35,
     "max": 6.35,
     "quality": "reported",
     "raw": "1/4\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-06-23",
     "quality": "reported",
     "raw": "6/23/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/96",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P22a",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 96,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinguished at higher flow",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3. NASA's file PSI-25_Experimental table_BASS-II.csv gives the same. NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same.",
     "evidence": "Extinguished at higher flow, possibly rod not preheated enough by a bit, CO readings elevated, slow response",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P22a 200m 9.525-mm black rod –35 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "approx": true,
     "quality": "reported",
     "raw": "5 down to ext",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: down to ext.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "3/8\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "3/8\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.208,
     "max": 0.208,
     "quality": "reported",
     "raw": "20.8",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.006,
     "max": 0.006,
     "outside_expected_range": true,
     "quality": "reported",
     "raw": "0.6",
     "column": "Calibrated final O2 % by vol",
     "note": "Outside the expected range; kept exactly as published."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 9.525,
     "max": 9.525,
     "quality": "reported",
     "raw": "3/8\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-08",
     "quality": "reported",
     "raw": "7/8/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/97",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P22b",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 97,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0109,
     "max": 0.0109,
     "quality": "reported",
     "raw": "1.09",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 239,
     "max": 239,
     "quality": "reported",
     "raw": "239",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinguished at lower flow than P22a",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3. NASA's file PSI-25_Experimental table_BASS-II.csv gives the same. NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same.",
     "evidence": "Extinguished at lower flow than P22a by a bit, longer slower decrease in flow, CO elevated, slow response",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P22b 200m 9.525-mm black rod –35 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "approx": true,
     "quality": "reported",
     "raw": "5 down to ext",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: down to ext.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "3/8\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "3/8\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "20",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.391,
     "max": 0.391,
     "outside_expected_range": true,
     "quality": "reported",
     "raw": "39.1",
     "column": "Calibrated final O2 % by vol",
     "note": "Higher than the oxygen at the start of this test, which burning cannot cause; kept exactly as published."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 9.525,
     "max": 9.525,
     "quality": "reported",
     "raw": "3/8\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-08",
     "quality": "reported",
     "raw": "7/8/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/98",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P23",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 98,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0208,
     "max": 0.0208,
     "quality": "reported",
     "raw": "2.08",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 159,
     "max": 159,
     "quality": "reported",
     "raw": "159",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "extinction at fan pot 0.38",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3.",
     "evidence": "Alternated fan pot between 1 and 2 at 1-min then 2-min intervals to try to get time constant resolution; finally turned pot down slowly, extinction at fan pot 0.38",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P23 201m 9.525-mm black rod 36 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 2,
     "levels": [
      0,
      2
     ],
     "approx": true,
     "quality": "reported",
     "raw": "2 0 2 0 etc",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: etc.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "3/8\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "3/8\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.182,
     "max": 0.182,
     "quality": "reported",
     "raw": "18.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "17",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 9.525,
     "max": 9.525,
     "quality": "reported",
     "raw": "3/8\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-30",
     "quality": "reported",
     "raw": "7/30/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/99",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P24",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 99,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0224,
     "max": 0.0224,
     "quality": "reported",
     "raw": "2.24",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 260,
     "max": 260,
     "quality": "reported",
     "raw": "260",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "extinction at fan pot 0.30",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3.",
     "evidence": "Alternated fan pot between 1 and 2 at 1-min intervals to try to get time constant resolution; finally turned pot down slowly, extinction at fan pot 0.30",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P24 819L 9.525-mm black rod 36 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 2,
     "levels": [
      0,
      2
     ],
     "approx": true,
     "quality": "reported",
     "raw": "2 0 2 0 etc",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: etc.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "3/8\" black rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "3/8\" black rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.19,
     "max": 0.19,
     "quality": "reported",
     "raw": "19",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.175,
     "max": 0.175,
     "quality": "reported",
     "raw": "17.5",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 9.525,
     "max": 9.525,
     "quality": "reported",
     "raw": "3/8\" black rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-30",
     "quality": "reported",
     "raw": "7/30/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/100",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "P25",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 100,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.01,
     "max": 0.01,
     "quality": "reported",
     "raw": "1",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 205,
     "max": 205,
     "quality": "reported",
     "raw": "205",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "extinguished at same 0.31 pot",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3. NASA's file PSI-25_Experimental table_BASS-II.csv gives the same. NASA's file PSI-25_Science Documents_BASS-II_Test.Matrices.xlsx gives the same.",
     "evidence": "Reburn of 217m in opposed geometry, repeat of P22b, extinguished at same 0.31 pot, more sparklers from flame, and less leading edge vapor jetting, or more central jetting; rod warped downward in video view at end of test, asymmetrical instabilities noted briefly at pot change to 0.32, CO elevated, slow response",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "p. 115, printed page 107, Table A.3",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 115, printed page 107, Table A.3. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "P25 217m 9.525-mm clear rod –36 2 Opposed",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "approx": true,
     "quality": "reported",
     "raw": "5 down to ext",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: down to ext.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "3/8\" clear rod",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "rod",
     "quality": "reported",
     "raw": "3/8\" clear rod",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "Fernandez-Pello",
     "quality": "reported",
     "raw": "Fernandez-Pello",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.209,
     "max": 0.209,
     "quality": "reported",
     "raw": "20.9",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.202,
     "max": 0.202,
     "quality": "reported",
     "raw": "20.2",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 9.525,
     "max": 9.525,
     "quality": "reported",
     "raw": "3/8\" clear rod",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-08",
     "quality": "reported",
     "raw": "7/8/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/101",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T1",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 101,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0041,
     "max": 0.0041,
     "quality": "reported",
     "raw": "0.41",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 40,
     "max": 40,
     "quality": "reported",
     "raw": "40",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_speed_cm_s": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.185,
     "max": 0.185,
     "quality": "reported",
     "raw": "18.5",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.185,
     "max": 0.185,
     "quality": "reported",
     "raw": "18.5",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-02-14",
     "quality": "reported",
     "raw": "2/14/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/102",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T2",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 102,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0045,
     "max": 0.0045,
     "quality": "reported",
     "raw": "0.45",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 78,
     "max": 78,
     "quality": "reported",
     "raw": "78",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_speed_cm_s": {
     "min": 4,
     "max": 9,
     "levels": [
      4,
      5,
      9
     ],
     "quality": "reported",
     "raw": "9 5 4",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "very late in the burn",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "Flow velocity changed to 9 to 5 fairly early then very late in the burn changed to 4",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.185,
     "max": 0.185,
     "quality": "reported",
     "raw": "18.5",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.185,
     "max": 0.185,
     "quality": "reported",
     "raw": "18.5",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-02-14",
     "quality": "reported",
     "raw": "2/14/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/103",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T3",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 103,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.007,
     "max": 0.007,
     "quality": "reported",
     "raw": "0.7",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 113,
     "max": 113,
     "quality": "reported",
     "raw": "113",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "brief flames go out",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6.",
     "evidence": "Multiple ignition attempts on card 3, brief flames go out",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "stagnation",
     "quality": "reported",
     "raw": "Stagnation",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T3 182m 4 cm spherical section -24 broke, -25 2 Stagnation",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "4 cm spherical section",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "4 cm spherical section",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.172,
     "max": 0.172,
     "quality": "reported",
     "raw": "17.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.168,
     "max": 0.168,
     "quality": "reported",
     "raw": "16.8",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 40,
     "max": 40,
     "quality": "reported",
     "raw": "4 cm spherical section",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-06-27",
     "quality": "reported",
     "raw": "6/27/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/104",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T4",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 104,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0045,
     "max": 0.0045,
     "quality": "reported",
     "raw": "0.45",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 72,
     "max": 72,
     "quality": "reported",
     "raw": "72",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "extinguished after turning into flamelet",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6. Table 7.1 of the same report says \"Quenched\".",
     "evidence": "O2 reading creeped up slightly after a long pause in operations; flow velocity changed immediately after ignition down to 1 (fan pot 0.9); extinguished after turning into flamelet",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 1,
     "max": 9,
     "levels": [
      1,
      9
     ],
     "quality": "reported",
     "raw": "9 1",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.187,
     "max": 0.187,
     "quality": "reported",
     "raw": "18.7",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.187,
     "max": 0.187,
     "quality": "reported",
     "raw": "18.7",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-02-14",
     "quality": "reported",
     "raw": "2/14/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/105",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T5",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 105,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0025,
     "max": 0.0025,
     "quality": "reported",
     "raw": "0.25",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 41,
     "max": 41,
     "quality": "reported",
     "raw": "41",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T5 131 2 cm SIBAL Integral 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 1,
     "max": 10,
     "levels": [
      1,
      2,
      10
     ],
     "quality": "reported",
     "raw": "10 2 1",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "ignited at 10",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "HCN 0 HCL 0.6; ignited at 10, turned down to 2, then 1, sample very small and dim, but seemed to burn full sample length as a flamelet",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.188,
     "max": 0.188,
     "quality": "reported",
     "raw": "18.8",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.189,
     "max": 0.189,
     "quality": "reported",
     "raw": "18.9",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-04-10",
     "quality": "reported",
     "raw": "4/10/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/106",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T6",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 106,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0028,
     "max": 0.0028,
     "quality": "reported",
     "raw": "0.28",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 77,
     "max": 77,
     "quality": "reported",
     "raw": "77",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T6 132 2 cm SIBAL Integral 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 1,
     "max": 5,
     "levels": [
      1,
      2,
      5
     ],
     "approx": true,
     "quality": "reported",
     "raw": "5 2 1 <1",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: <1.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "still did not extinguish",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "HCL 0.9 at the end, still did not extinguish",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.188,
     "max": 0.188,
     "quality": "reported",
     "raw": "18.8",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.188,
     "max": 0.188,
     "quality": "reported",
     "raw": "18.8",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-04-10",
     "quality": "reported",
     "raw": "4/10/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/107",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T7",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 107,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0059,
     "max": 0.0059,
     "quality": "reported",
     "raw": "0.59",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 140,
     "max": 140,
     "quality": "reported",
     "raw": "140",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "0.28 extinction finally",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6.",
     "evidence": "Broke one igniter quickly, took a while to ignite, turned pot down in series ignition at 3.4, 1.6, 1.0, 0.4, 0.36, 0.34, 0.32, 0.31, 0.30, 0.29, 0.285, 0.28 extinction finally, HCl 1.8",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "stagnation",
     "quality": "reported",
     "raw": "Stagnation",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T7 182m 4 cm spherical section -33, -34 2 Stagnation",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 1,
     "max": 10,
     "levels": [
      1,
      3,
      5,
      10
     ],
     "approx": true,
     "quality": "reported",
     "raw": "10 5 3 1 decr",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept. NASA's cell also says: decr.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "4 cm spherical section",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "4 cm spherical section",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.173,
     "max": 0.173,
     "quality": "reported",
     "raw": "17.3",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.171,
     "max": 0.171,
     "quality": "reported",
     "raw": "17.1",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "approx": true,
     "quality": "assumed",
     "note": "Not listed in the PSI table. Taken as ISS cabin pressure, because the experiment ran inside the Microgravity Science Glovebox."
    },
    "size_mm": {
     "min": 40,
     "max": 40,
     "quality": "reported",
     "raw": "4 cm spherical section",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-09",
     "quality": "reported",
     "raw": "7/9/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/108",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T9",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 108,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0031,
     "max": 0.0031,
     "quality": "reported",
     "raw": "0.31",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "flame extinguished before spreading beyond igniter",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6.",
     "evidence": "Brief ignition but flame extinguished before spreading beyond igniter",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T9 133M 2 cm SIBAL Integral 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No ignition",
     "column": "p. 104, printed page 96, Table 7.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 104, printed page 96, Table 7.1. NASA's one-line result for this test in Table 7.1 of the report.",
     "evidence": "GMT175-T9 2.2 10 16.4 No ignition",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.164,
     "max": 0.164,
     "quality": "reported",
     "raw": "16.4",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.164,
     "max": 0.164,
     "quality": "reported",
     "raw": "16.4",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2018-06-24",
     "quality": "reported",
     "raw": "6/24/2018",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/109",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T10",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 109,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0033,
     "max": 0.0033,
     "quality": "reported",
     "raw": "0.33",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 14,
     "max": 14,
     "quality": "reported",
     "raw": "14",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "flame extinguished before spreading beyond igniter",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6.",
     "evidence": "Brief ignition but flame extinguished before spreading beyond igniter",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T10 134M 2 cm SIBAL Integral 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No ignition",
     "column": "p. 104, printed page 96, Table 7.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 104, printed page 96, Table 7.1. NASA's one-line result for this test in Table 7.1 of the report.",
     "evidence": "GMT175-T10 2.2 5 16.4 No ignition",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.164,
     "max": 0.164,
     "quality": "reported",
     "raw": "16.4",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.165,
     "max": 0.165,
     "quality": "reported",
     "raw": "16.5",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-06-24",
     "quality": "reported",
     "raw": "6/24/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/110",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T11",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 110,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0039,
     "max": 0.0039,
     "quality": "reported",
     "raw": "0.39",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 45,
     "max": 45,
     "quality": "reported",
     "raw": "45",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Burned completely",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6.",
     "evidence": "Burned completely, steady, HCl 0.3 to 0.9",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T11 135m 2 cm SIBAL Integral 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.171,
     "max": 0.171,
     "quality": "reported",
     "raw": "17.1",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "17",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-06-27",
     "quality": "reported",
     "raw": "6/27/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/111",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T12",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 111,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.007,
     "max": 0.007,
     "quality": "reported",
     "raw": "0.7",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 117,
     "max": 117,
     "quality": "reported",
     "raw": "117",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinguished quickly",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6.",
     "evidence": "Extinguished quickly",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T12 136m 2 cm SIBAL Integral 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No ignition",
     "column": "p. 104, printed page 96, Table 7.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 104, printed page 96, Table 7.1. NASA's one-line result for this test in Table 7.1 of the report.",
     "evidence": "GMT178-T12 2.2 5 16.8 No ignition",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.168,
     "max": 0.168,
     "quality": "reported",
     "raw": "16.8",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.169,
     "max": 0.169,
     "quality": "reported",
     "raw": "16.9",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-06-27",
     "quality": "reported",
     "raw": "6/27/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/112",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T13",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 112,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.002,
     "max": 0.002,
     "quality": "reported",
     "raw": "0.2",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 12,
     "max": 12,
     "quality": "reported",
     "raw": "12",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "flame extinguished quickly after flow change",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. Table 7.1 of the same report says \"Quenched\".",
     "evidence": "HCL 0.2 end, 0.1 start, no HCN, flame extinguished quickly after flow change.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T13 137 2 cm SIBAL Integral 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 1,
     "max": 5,
     "levels": [
      1,
      5
     ],
     "quality": "reported",
     "raw": "5 1",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.175,
     "max": 0.175,
     "quality": "reported",
     "raw": "17.5",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.176,
     "max": 0.176,
     "quality": "reported",
     "raw": "17.6",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-04-10",
     "quality": "reported",
     "raw": "4/10/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/113",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T14",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 113,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0072,
     "max": 0.0072,
     "quality": "reported",
     "raw": "0.72",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 152,
     "max": 152,
     "quality": "reported",
     "raw": "152",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinguished as we reduced flow below 3 cm/s",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. Table 7.1 of the same report says \"Quenched\".",
     "evidence": "Extinguished as we reduced flow below 3 cm/s",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T14 140m 2 cm SIBAL Integral 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 3,
     "max": 5,
     "levels": [
      3,
      5
     ],
     "quality": "reported",
     "raw": "5 3",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.169,
     "max": 0.169,
     "quality": "reported",
     "raw": "16.9",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.169,
     "max": 0.169,
     "quality": "reported",
     "raw": "16.9",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-06-27",
     "quality": "reported",
     "raw": "6/27/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/114",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T15",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 114,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0051,
     "max": 0.0051,
     "quality": "reported",
     "raw": "0.51",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 102,
     "max": 102,
     "quality": "reported",
     "raw": "102",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_speed_cm_s": {
     "min": 9,
     "max": 29,
     "levels": [
      9,
      29
     ],
     "quality": "reported",
     "raw": "9 29",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "no blowoff attained",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "Initial air reading is 15, but Rick did not wait long enough for the anemometer to stabilize; actual airspeed is about 9 cm/s; no flow restrictors installed, but flow only maxed out to 29 cm/s; no blowoff attained",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.187,
     "max": 0.187,
     "quality": "reported",
     "raw": "18.7",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.187,
     "max": 0.187,
     "quality": "reported",
     "raw": "18.7",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-02-14",
     "quality": "reported",
     "raw": "2/14/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/115",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T16",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 115,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0021,
     "max": 0.0021,
     "quality": "reported",
     "raw": "0.21",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 41,
     "max": 41,
     "quality": "reported",
     "raw": "41",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "flame spread whole sample at 3 cm/s",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. NASA says the \"flame spread whole sample\". Read as: the sample burned to the end.",
     "evidence": "Initial HCl 0.2 final 0.5, no HCN, flame spread whole sample at 3 cm/s",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T16 139 2 cm SIBAL Integral 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 3,
     "max": 5,
     "levels": [
      3,
      5
     ],
     "quality": "reported",
     "raw": "5 3",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.176,
     "max": 0.176,
     "quality": "reported",
     "raw": "17.6",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.175,
     "max": 0.175,
     "quality": "reported",
     "raw": "17.5",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-04-10",
     "quality": "reported",
     "raw": "4/10/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/116",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T17",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 116,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0075,
     "max": 0.0075,
     "quality": "reported",
     "raw": "0.75",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 190,
     "max": 190,
     "quality": "reported",
     "raw": "190",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T17 142m 2 cm SIBAL Integral 0 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 6,
     "max": 53,
     "levels": [
      6,
      53
     ],
     "quality": "reported",
     "raw": "6 53",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Tried to blowoff, but did not",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "Tried to blowoff, but did not",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.169,
     "max": 0.169,
     "quality": "reported",
     "raw": "16.9",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.169,
     "max": 0.169,
     "quality": "reported",
     "raw": "16.9",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-06-27",
     "quality": "reported",
     "raw": "6/27/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/117",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T18",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 117,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0038,
     "max": 0.0038,
     "quality": "reported",
     "raw": "0.38",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 22,
     "max": 22,
     "quality": "reported",
     "raw": "22",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "flame extinguished as it spread away from igniter",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. Table 7.1 of the same report says \"Quenched\".",
     "evidence": "Brief ignition but flame extinguished as it spread away from igniter, further than previous runs today",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T18 141M 2 cm SIBAL Integral 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 2,
     "max": 5,
     "levels": [
      2,
      5
     ],
     "quality": "reported",
     "raw": "5 2",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.174,
     "max": 0.174,
     "quality": "reported",
     "raw": "17.4",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.174,
     "max": 0.174,
     "quality": "reported",
     "raw": "17.4",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2018-06-24",
     "quality": "reported",
     "raw": "6/24/2018",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/118",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T19",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 118,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0031,
     "max": 0.0031,
     "quality": "reported",
     "raw": "0.31",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "20",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T19 143m 1 cm SIBAL Integral 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 11,
     "max": 11,
     "quality": "reported",
     "raw": "11",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Steady burn",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "Steady burn, HCL 0.3 > 0.6",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.172,
     "max": 0.172,
     "quality": "reported",
     "raw": "17.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.172,
     "max": 0.172,
     "quality": "reported",
     "raw": "17.2",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-09",
     "quality": "reported",
     "raw": "7/9/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/119",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T20",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 119,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0031,
     "max": 0.0031,
     "quality": "reported",
     "raw": "0.31",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 34,
     "max": 34,
     "quality": "reported",
     "raw": "34",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Quick extinction when we turned air down to 3 cm/s",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. Table 7.1 of the same report says \"Quenched\".",
     "evidence": "Quick extinction when we turned air down to 3 cm/s, HCl 0.8 end",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T20 144m 1 cm SIBAL Integral 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 3,
     "max": 11,
     "levels": [
      3,
      11
     ],
     "quality": "reported",
     "raw": "11 3",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.172,
     "max": 0.172,
     "quality": "reported",
     "raw": "17.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.172,
     "max": 0.172,
     "quality": "reported",
     "raw": "17.2",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-09",
     "quality": "reported",
     "raw": "7/9/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/120",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T21",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 120,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0032,
     "max": 0.0032,
     "quality": "reported",
     "raw": "0.32",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 45,
     "max": 45,
     "quality": "reported",
     "raw": "45",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "blowoff",
     "quality": "reported",
     "raw": "Successful blowoff",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. Table 7.1 of the same report says \"Blow-off\".",
     "evidence": "Successful blowoff! HCl still 0.8 end",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T21 145m 1 cm SIBAL Integral 0 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 11,
     "max": 11,
     "approx": true,
     "quality": "reported",
     "raw": "11 max(47)",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. NASA's cell also says: max.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.172,
     "max": 0.172,
     "quality": "reported",
     "raw": "17.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.172,
     "max": 0.172,
     "quality": "reported",
     "raw": "17.2",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-09",
     "quality": "reported",
     "raw": "7/9/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/121",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T22",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 121,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0062,
     "max": 0.0062,
     "quality": "reported",
     "raw": "0.62",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 162,
     "max": 162,
     "quality": "reported",
     "raw": "162",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "turned down to 5 and extinguished",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. Table 7.1 of the same report says \"Quenched\".",
     "evidence": "Ignited at 11, turned down to 5 and extinguished, HCl 2.0",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T22 146m 1 cm SIBAL Integral 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 10,
     "levels": [
      5,
      10
     ],
     "quality": "reported",
     "raw": "10 5",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.171,
     "max": 0.171,
     "quality": "reported",
     "raw": "17.1",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "17",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-09",
     "quality": "reported",
     "raw": "7/9/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/122",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T23",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 122,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0032,
     "max": 0.0032,
     "quality": "reported",
     "raw": "0.32",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 49,
     "max": 49,
     "quality": "reported",
     "raw": "49",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T23 133m 2 cm SI, moved igniter Integral 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "2 cm Sibal moved igniter",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "2 cm Sibal moved igniter",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "Did not ignite with moved igniter",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. NASA's observation says the sample did not ignite or keep a flame. Table 7.1 of the same report says \"Reused, did not ignite\".",
     "evidence": "Did not ignite with moved igniter, HCl 0.8",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.172,
     "max": 0.172,
     "quality": "reported",
     "raw": "17.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.173,
     "max": 0.173,
     "quality": "reported",
     "raw": "17.3",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm Sibal moved igniter",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-09",
     "quality": "reported",
     "raw": "7/9/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/123",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T24",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 123,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0053,
     "max": 0.0053,
     "quality": "reported",
     "raw": "0.53",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 107,
     "max": 107,
     "quality": "reported",
     "raw": "107",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T24 133m 1 cm SIBAL, top side ign –29 2 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "1 cm SIBAL top side ign",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "1 cm SIBAL top side ign",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "got steady spread of a one-sided flame",
     "column": "p. 120, printed page 112, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 120, printed page 112, Table A.6. NASA's observation describes a burning flame. It does not say how the test ended. Table 7.1 of the same report says \"Reused, one-sided flame\".",
     "evidence": "Ignited top of sample with retractable igniter and got steady spread of a one-sided flame",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.182,
     "max": 0.182,
     "quality": "reported",
     "raw": "18.2",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.182,
     "max": 0.182,
     "quality": "reported",
     "raw": "18.2",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 cm SIBAL top side ign",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-07-09",
     "quality": "reported",
     "raw": "7/9/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/124",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T25",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 124,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0039,
     "max": 0.0039,
     "quality": "reported",
     "raw": "0.39",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 17,
     "max": 17,
     "quality": "reported",
     "raw": "17",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T25 138m SIBAL 2 cm 39 1 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 2.5,
     "max": 5,
     "levels": [
      2.5,
      5
     ],
     "quality": "reported",
     "raw": "5 2.5",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Ignition at 5 cm/s",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6. NASA's observation describes a burning flame. It does not say how the test ended. Table 7.1 of the same report says \"Reused, ignited\".",
     "evidence": "Ignition at 5 cm/s then decrease to 2.5 cm/s and hold constant",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.208,
     "max": 0.208,
     "quality": "reported",
     "raw": "20.8",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.207,
     "max": 0.207,
     "quality": "reported",
     "raw": "20.7",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-08-04",
     "quality": "reported",
     "raw": "8/4/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/125",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T26",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 125,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0043,
     "max": 0.0043,
     "quality": "reported",
     "raw": "0.43",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 24,
     "max": 24,
     "quality": "reported",
     "raw": "24",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T26 137m SIBAL 2 cm 39 1 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 2.5,
     "max": 5,
     "levels": [
      2.5,
      5
     ],
     "quality": "reported",
     "raw": "5 2.5",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Ignition at 5 cm/s",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6. NASA's observation describes a burning flame. It does not say how the test ended. Table 7.1 of the same report says \"Reused, ignited\".",
     "evidence": "Ignition at 5 cm/s then decrease to 2.5 cm/s and hold constant",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.208,
     "max": 0.208,
     "quality": "reported",
     "raw": "20.8",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.207,
     "max": 0.207,
     "quality": "reported",
     "raw": "20.7",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-08-04",
     "quality": "reported",
     "raw": "8/4/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/126",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T27",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 126,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0042,
     "max": 0.0042,
     "quality": "reported",
     "raw": "0.42",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "fuel is burned out",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6.",
     "evidence": "Ignition at 5 cm/s, then quickly to 2 cm/s (fan pot 0.7); fuel is burned out",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T27 146m 1 cm SIBAL 39 1 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 2,
     "max": 5,
     "levels": [
      2,
      5
     ],
     "quality": "reported",
     "raw": "5 2",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Reused, ignited",
     "column": "p. 104, printed page 96, Table 7.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 104, printed page 96, Table 7.1. NASA's one-line result for this test in Table 7.1 of the report.",
     "evidence": "GMT216-T27 1.2 5 to 2 20.7 Reused, ignited",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.207,
     "max": 0.207,
     "quality": "reported",
     "raw": "20.7",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.206,
     "max": 0.206,
     "quality": "reported",
     "raw": "20.6",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-08-04",
     "quality": "reported",
     "raw": "8/4/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/127",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T28a",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 127,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "flame only briefly flashed then went out",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6.",
     "evidence": "Tried to get one-sided ignition, but flame only briefly flashed then went out",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T28a 144m 1 cm SIBAL 39 1 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "Reused, did not ignite",
     "column": "p. 104, printed page 96, Table 7.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 104, printed page 96, Table 7.1. NASA's one-line result for this test in Table 7.1 of the report.",
     "evidence": "GMT216-T28a 1.2 5 20.7 Reused, did not ignite",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.207,
     "max": 0.207,
     "quality": "reported",
     "raw": "20.7",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.009,
     "max": 0.009,
     "outside_expected_range": true,
     "quality": "reported",
     "raw": "0.9",
     "column": "Calibrated final O2 % by vol",
     "note": "Outside the expected range; kept exactly as published."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-08-04",
     "quality": "reported",
     "raw": "8/4/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/128",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T28b",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 128,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0042,
     "max": 0.0042,
     "quality": "reported",
     "raw": "0.42",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "flame only briefly flashed then went out",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6.",
     "evidence": "Tried to get one-sided ignition, but again flame only briefly flashed then went out",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T28b 144m 1 cm SIBAL 39 1 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "Reused, did not ignite",
     "column": "p. 104, printed page 96, Table 7.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 104, printed page 96, Table 7.1. NASA's one-line result for this test in Table 7.1 of the report.",
     "evidence": "GMT216-T28b 1.2 5 20.7 Reused, did not ignite",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.207,
     "max": 0.207,
     "quality": "reported",
     "raw": "20.7",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.404,
     "max": 0.404,
     "outside_expected_range": true,
     "quality": "reported",
     "raw": "40.4",
     "column": "Calibrated final O2 % by vol",
     "note": "Higher than the oxygen at the start of this test, which burning cannot cause; kept exactly as published."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-08-04",
     "quality": "reported",
     "raw": "8/4/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-25/bass2/129",
   "accession": "PSI-25",
   "investigation": "BASS-II",
   "type": "test",
   "label": "T29",
   "source_table": "PSI-25_Experimental table_BASS-II.csv",
   "source_row": 129,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-25",
   "values": {
    "co2_fraction_final": {
     "min": 0.0044,
     "max": 0.0044,
     "quality": "reported",
     "raw": "0.44",
     "column": "Final CO2 % by vol"
    },
    "co_ppm_final": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "Final CO (ppm)"
    },
    "diluent": {
     "text": "N2",
     "quality": "context",
     "evidence": "oxygen varied below 21% by adding nitrogen",
     "evidence_source": "psi"
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "flame went out after a few seconds",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6.",
     "evidence": "Alex commented that he thought the angle of the igniter should be reversed to get one-sided ignition, so he tried that; one-sided flame initially but quickly became two-sided; after ignition, fan pot changed to 0.6 and flame went out after a few seconds",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "p. 121, printed page 113, Table A.6",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 121, printed page 113, Table A.6. NASA wrote this word in the column headed \"Sample distance\" of its test matrix.",
     "evidence": "T29 145m 1 cm SIBAL 39 1 Concurrent",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "flow_speed_cm_s": {
     "min": 2,
     "max": 5,
     "levels": [
      2,
      5
     ],
     "approx": true,
     "quality": "reported",
     "raw": "5 2(?)",
     "column": "Air display",
     "note": "Read from the duct's air-speed display. NASA notes that this display responds slowly, in about a minute, so a reading is only steady after a long time at one setting. The flow was changed during this test; every speed NASA lists is kept.",
     "evidence": "Air display:  flow speed measured in the duct in cm/s on the video display.",
     "evidence_source": "doc:bass2-readme"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "solid fuels burning in low-velocity forced flows in microgravity",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Reused, ignited",
     "column": "p. 104, printed page 96, Table 7.1",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 104, printed page 96, Table 7.1. NASA's one-line result for this test in Table 7.1 of the report.",
     "evidence": "GMT216-T29 1.2 5 to 2 20.7 Reused, ignited",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "investigator": {
     "text": "T'ien",
     "quality": "reported",
     "raw": "T'ien",
     "column": "PI"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Ambient oxygen concentration (via working volume nitrogen vitiation)",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.207,
     "max": 0.207,
     "quality": "reported",
     "raw": "20.7",
     "column": "Calibrated initial O2 % by vol"
    },
    "o2_fraction_final": {
     "min": 0.205,
     "max": 0.205,
     "quality": "reported",
     "raw": "20.5",
     "column": "Calibrated final O2 % by vol"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric)",
     "note": "From NASA's file PSI-25_Reports_BASS-II Summary Report.pdf, p. 102, printed page 94, section 7.1 (T'ien: concurrent flame growth over SIBAL fabric). NASA states the ambient pressure of T'ien's SIBAL fabric experiment as 1 atm; 1 atm is 101.325 kPa. A value for the experiment, not a reading for each test. It replaces a value that had been assumed.",
     "evidence": "The tests were conducted in ambient O2 molar fraction of 16 to 21 percent. Ambient pressure was 1 atm.",
     "evidence_source": "file:PSI-25_Reports_BASS-II Summary Report.pdf"
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1 cm SIBAL",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2014-08-04",
     "quality": "reported",
     "raw": "8/4/2014",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/1",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 1",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "extinguishes at burnout",
     "column": "as run matrix!AD4",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD4.",
     "evidence": "Nice symmetric burn, some soot at 10 cm/s,  Steady spreading, flame seems to reach a steady length.  Decreasing flow shrinks flame and changes to mostly blue, but still spreading.  Gets very dim near end of sample as it shrinks and extinguishes at burnout.  Don noted the fiberglass matrix was still intact after the burn.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 10,
     "quality": "reported",
     "raw": "10, 5",
     "column": "as run matrix!K4",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K4. NASA lists the speeds \"10, 5\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.221,
     "max": 0.221,
     "quality": "reported",
     "raw": "0.221",
     "column": "as run matrix!AA4",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA4. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 98.285,
     "max": 98.285,
     "quality": "reported",
     "raw": "0.97",
     "column": "as run matrix!AB4",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB4. NASA gives 0.97 atm; multiplied by 101.325."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-03-30",
     "quality": "reported",
     "raw": "3/30/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/2",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 42",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 3,
     "max": 10,
     "quality": "reported",
     "raw": "10, 5, 3",
     "column": "as run matrix!K5",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K5. NASA lists the speeds \"10, 5, 3\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Flame not very long , but very sooty",
     "column": "as run matrix!AD5",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD5. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "Don noted significant vapor jetting.   Flame not very long , but very sooty.  Don set up a 2nd still camera taking pictures 1/s at F7, Aperture priority, spot metering on center of sphere in brackets of 3. Don noted equatorial division between 'charred' front like coating on meterorites,  and matt black sooty rear hemispheres.  Broke igniter.  2 minute burn.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.221,
     "max": 0.221,
     "quality": "reported",
     "raw": "0.221",
     "column": "as run matrix!AA5",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA5. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 98.285,
     "max": 98.285,
     "quality": "reported",
     "raw": "0.97",
     "column": "as run matrix!AB5",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB5. NASA gives 0.97 atm; multiplied by 101.325."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-03-30",
     "quality": "reported",
     "raw": "3/30/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/3",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 18",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 3,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "Only extinguishes when all flow stops",
     "column": "as run matrix!AD6",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD6. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "Very bright sooty ball.   Lots of vapor jetting.   N2 on at 1 minute.   Blew off stagnation region but N2 did not extinguish wake,  even with air flow off.  Don turned off air, then N2 after some seconds.  Wake flame sooty and wind-blown.  Only extinguishes when all flow stops.  N2 is entraining air to flame zone.  Don noted that there was no soot on the sphere, just the 'char layer'.  ~ 2 minute total burn.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 3,
     "max": 10,
     "quality": "reported",
     "raw": "10, 3-4",
     "column": "as run matrix!K6",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K6. NASA lists the speeds \"10, 3-4\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA sphere 1 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "PMMA sphere 1 cm",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.221,
     "max": 0.221,
     "quality": "reported",
     "raw": "0.221",
     "column": "as run matrix!AA6",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA6. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 98.285,
     "max": 98.285,
     "quality": "reported",
     "raw": "0.97",
     "column": "as run matrix!AB6",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB6. NASA gives 0.97 atm; multiplied by 101.325."
    },
    "size_mm": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMMA sphere 1 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-03-30",
     "quality": "reported",
     "raw": "3/30/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/4",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 7",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 4,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "as run matrix!K7",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K7. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "~ 40 s burn",
     "column": "as run matrix!AD7",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD7. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "~ 40 s burn, Don asked if images were too saturated, Paul said OK. Don set up 2nd still camera for additional images.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.219,
     "max": 0.219,
     "quality": "reported",
     "raw": "0.219",
     "column": "as run matrix!AA7",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA7. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 98.285,
     "max": 98.285,
     "quality": "reported",
     "raw": "0.97",
     "column": "as run matrix!AB7",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB7. NASA gives 0.97 atm; multiplied by 101.325."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-04-05",
     "quality": "reported",
     "raw": "4/5/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/5",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 8",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 5,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "as run matrix!K8",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K8. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "~ 60 s burn",
     "column": "as run matrix!AD8",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD8. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "~ 60 s burn,   Don  said he like to watch solid samples burn in space and it makes him appreciate that he wouldn't want to be be there in a real fire - it wouldn't be pretty.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.219,
     "max": 0.219,
     "quality": "reported",
     "raw": "0.219",
     "column": "as run matrix!AA8",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA8. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 98.285,
     "max": 98.285,
     "quality": "reported",
     "raw": "0.97",
     "column": "as run matrix!AB8",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB8. NASA gives 0.97 atm; multiplied by 101.325."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-04-05",
     "quality": "reported",
     "raw": "4/5/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/6",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 43",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 6,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 6,
     "max": 10,
     "quality": "reported",
     "raw": "10, 6",
     "column": "as run matrix!K9",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K9. NASA lists the speeds \"10, 6\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.217,
     "max": 0.217,
     "quality": "reported",
     "raw": "0.217",
     "column": "as run matrix!AA9",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA9. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.299,
     "max": 99.299,
     "quality": "reported",
     "raw": "0.98",
     "column": "as run matrix!AB9",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB9. NASA gives 0.98 atm; multiplied by 101.325."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-04-09",
     "quality": "reported",
     "raw": "4/9/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/7",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 44",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 7,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 2,
     "max": 10,
     "quality": "reported",
     "raw": "10,2-3",
     "column": "as run matrix!K10",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K10. NASA lists the speeds \"10,2-3\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.217,
     "max": 0.217,
     "quality": "reported",
     "raw": "0.217",
     "column": "as run matrix!AA10",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA10. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.299,
     "max": 99.299,
     "quality": "reported",
     "raw": "0.98",
     "column": "as run matrix!AB10",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB10. NASA gives 0.98 atm; multiplied by 101.325."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-04-09",
     "quality": "reported",
     "raw": "4/9/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/8",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 45",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 8,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Flame doesn't go out until fan goes to 38",
     "column": "as run matrix!AD11",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD11. Fan display 38 is the reading with the fan off in NASA's fan calibration sheet. Read as: it went out at the lowest flow.",
     "evidence": "No filter on this test.  Don didn't reset the camera trigger, so only got 100 frames.  Very low flows possible (AIR reading 0) at FAN 42.  Apparent at end with N2 extinguishment.  Flame doesn't go out until fan goes to 38.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 1,
     "max": 10,
     "quality": "reported",
     "raw": "10, 1-2",
     "column": "as run matrix!K11",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K11. NASA lists the speeds \"10, 1-2\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.217,
     "max": 0.217,
     "quality": "reported",
     "raw": "0.217",
     "column": "as run matrix!AA11",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA11. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.299,
     "max": 99.299,
     "quality": "reported",
     "raw": "0.98",
     "column": "as run matrix!AB11",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB11. NASA gives 0.98 atm; multiplied by 101.325."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-04-09",
     "quality": "reported",
     "raw": "4/9/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/9",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 19",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 9,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "To extinguish, turned  flow off",
     "column": "as run matrix!AD12",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD12. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "sample 18 and 19 mix up on names.  Logging actual sample barcode used here.  Grew from blue flame to sooty envelope flame.  To extinguish, turned  flow off,  and flame turned to blue sphere expanding upwind with a few soot particles.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "6",
     "column": "as run matrix!K12",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K12. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA sphere 1 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "PMMA sphere 1 cm",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.21887,
     "max": 0.21887,
     "quality": "reported",
     "raw": "=164.7/752.5",
     "column": "as run matrix!AA12",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA12. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =164.7/752.5."
    },
    "pressure_kpa": {
     "min": 100.325,
     "max": 100.325,
     "quality": "reported",
     "raw": "=752.5/760",
     "column": "as run matrix!AB12",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB12. NASA gives 0.99013 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =752.5/760."
    },
    "size_mm": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMMA sphere 1 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-05-02",
     "quality": "reported",
     "raw": "5/2/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/10",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 20",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 10,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "Turned blue and extinguished when fan off",
     "column": "as run matrix!AD13",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD13. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "Still a sooty flame even at 1 cm/s.  Turned blue and extinguished when fan off, lots of vapor jetting during extinguishment.  Lots of fuel vapor flushed out of duct when extinguished.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 6,
     "quality": "reported",
     "raw": "6, 3-2, 1-0",
     "column": "as run matrix!K13",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K13. NASA lists the speeds \"6, 3-2, 1-0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA sphere 1 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "PMMA sphere 1 cm",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.21887,
     "max": 0.21887,
     "quality": "reported",
     "raw": "=164.7/752.5",
     "column": "as run matrix!AA13",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA13. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =164.7/752.5."
    },
    "pressure_kpa": {
     "min": 100.325,
     "max": 100.325,
     "quality": "reported",
     "raw": "=752.5/760",
     "column": "as run matrix!AB13",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB13. NASA gives 0.99013 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =752.5/760."
    },
    "size_mm": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMMA sphere 1 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-05-02",
     "quality": "reported",
     "raw": "5/2/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/11",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 21",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 11,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Turned off flow right when fuel completely ran out",
     "column": "as run matrix!AD14",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD14. The crew turned the flow off as the fuel ran out. Read as: the sample burned to the end.",
     "evidence": "Burning laminar but sooty at 42, turned down very slowly to 41 and flame started to turn blue and vapor jet.  Turned fan to max, and flame did not blow off stagnation region.  Burning rate incredibly fast.  Turned off flow right when fuel completely ran out.  Don examined igniter and there is one thin spot, so may not last much longer.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA sphere 1 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "PMMA sphere 1 cm",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.21887,
     "max": 0.21887,
     "quality": "reported",
     "raw": "=164.7/752.5",
     "column": "as run matrix!AA14",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA14. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =164.7/752.5."
    },
    "pressure_kpa": {
     "min": 100.325,
     "max": 100.325,
     "quality": "reported",
     "raw": "=752.5/760",
     "column": "as run matrix!AB14",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB14. NASA gives 0.99013 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =752.5/760."
    },
    "size_mm": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "PMMA sphere 1 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-05-02",
     "quality": "reported",
     "raw": "5/2/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/12",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 4",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 12,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 22,
     "max": 22,
     "quality": "reported",
     "raw": "22",
     "column": "as run matrix!K15",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K15. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Burned sample on video at 14:59",
     "column": "as run matrix!AD15",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD15. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "Originally identified sample as 7, but 7 was last one left on GMT 222. Don commented on blue outer zone noted with yellow inside. Don asked about a flash right after ignition.  He checked igniter and it was still intact.  Burned sample on video at 14:59.  Long flame, probably not a steady size.  No recirculation zone formed downstream of sample.  26 s burn.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.216292,
     "max": 0.216292,
     "quality": "reported",
     "raw": "=161.7/747.6",
     "column": "as run matrix!AA15",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA15. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =161.7/747.6."
    },
    "pressure_kpa": {
     "min": 99.672,
     "max": 99.672,
     "quality": "reported",
     "raw": "=747.6/760",
     "column": "as run matrix!AB15",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB15. NASA gives 0.98368 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =747.6/760."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-05-10",
     "quality": "reported",
     "raw": "5/10/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/13",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 10",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 13,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 11,
     "max": 11,
     "quality": "reported",
     "raw": "11",
     "column": "as run matrix!K16",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K16. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "SIBAL 1 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "SIBAL 1 cm",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.216292,
     "max": 0.216292,
     "quality": "reported",
     "raw": "=161.7/747.6",
     "column": "as run matrix!AA16",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA16. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =161.7/747.6."
    },
    "pressure_kpa": {
     "min": 99.672,
     "max": 99.672,
     "quality": "reported",
     "raw": "=747.6/760",
     "column": "as run matrix!AB16",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB16. NASA gives 0.98368 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =747.6/760."
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "SIBAL 1 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-05-10",
     "quality": "reported",
     "raw": "5/10/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/14",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 12",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 14,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 15,
     "max": 15,
     "quality": "reported",
     "raw": "15",
     "column": "as run matrix!K17",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K17. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Nomex",
     "quality": "reported",
     "raw": "Nomex blend 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "Nomex blend 2 cm",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "Died when igniter turned off",
     "column": "as run matrix!AD17",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD17. NASA's observation says the sample did not ignite or keep a flame.",
     "evidence": "Ignited and burned for only 2 s.  Died when igniter turned off.  Repeated re-ignition attempts failed.  Don didn't want it to burn since their flight suits are made of this stuff.  He felt like he should have left the igniter on longer.  Fan cal and GN2 cal  at ~16:00",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.216292,
     "max": 0.216292,
     "quality": "reported",
     "raw": "=161.7/747.6",
     "column": "as run matrix!AA17",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA17. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =161.7/747.6."
    },
    "pressure_kpa": {
     "min": 99.672,
     "max": 99.672,
     "quality": "reported",
     "raw": "=747.6/760",
     "column": "as run matrix!AB17",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB17. NASA gives 0.98368 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =747.6/760."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "Nomex blend 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-05-10",
     "quality": "reported",
     "raw": "5/10/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/15",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 54",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 15,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Fan turned to 40 at 16:19:22, flame and flame went out at 16:19:34",
     "column": "as run matrix!AD18",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD18.",
     "evidence": "No Don camera.  Wake flame very dim on video, all blue, spread very slowly upwind.  Ignited GBX time 16:14:44,  N2 on at 16:17:18,  did not extinguish, increased to pot 10, at 16:18:37,  N2 off at 16:19:19.  Accidentaly turned fan up briefly instead of N2.  Fan turned to 40 at 16:19:22, flame and flame went out at 16:19:34.  All times GBX.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 11,
     "max": 11,
     "quality": "reported",
     "raw": "11",
     "column": "as run matrix!K18",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K18. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.217,
     "max": 0.217,
     "quality": "reported",
     "raw": "0.217",
     "column": "as run matrix!AA18",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA18. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.704,
     "max": 99.704,
     "quality": "reported",
     "raw": "0.984",
     "column": "as run matrix!AB18",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB18. NASA gives 0.984 atm; multiplied by 101.325."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "PMMA 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-05-11",
     "quality": "reported",
     "raw": "5/11/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/16",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 55",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 16,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "Fan off at 35:30 ish.  Flame extinuishes right away",
     "column": "as run matrix!AD19",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD19. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "difficult to ignite,very dim blue, got some soot at 16:33:51 gbx time,   N2 on at 34:18,    soot faded a bit, still have a pimple of soot,  N2 off at 34:48, fan 42:35:04, all blue flame again, like blue crescent moon.  Fan off at 35:30 ish.  Flame extinuishes right away.  Don noted no soot deposition on the sphere.  Just has bubbles.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 6.5,
     "max": 6.5,
     "quality": "reported",
     "raw": "6.5",
     "column": "as run matrix!K19",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K19. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.217,
     "max": 0.217,
     "quality": "reported",
     "raw": "0.217",
     "column": "as run matrix!AA19",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA19. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.704,
     "max": 99.704,
     "quality": "reported",
     "raw": "0.984",
     "column": "as run matrix!AB19",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB19. NASA gives 0.984 atm; multiplied by 101.325."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "PMMA 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-05-11",
     "quality": "reported",
     "raw": "5/11/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/17",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 56",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 17,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "when turned off fan, and it extinguished right away",
     "column": "as run matrix!AD20",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD20. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "Adjusted igniter closer.  LOS  after fan change, 17:36 fan to 43. (MSG time). Came back at 17:39:40 or so.  Don described it as flame was taking off growing around sphere,  LE blue, trailing soot.  Illuminating circumference of sphere.  Vapor jetting just starting to do that when turned off fan, and it extinguished right away.  MSG playback started at 17:37 during session (1:27 into downlink video).",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 3.5,
     "max": 6,
     "quality": "reported",
     "raw": "6, 3.5",
     "column": "as run matrix!K20",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K20. NASA lists the speeds \"6, 3.5\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.217,
     "max": 0.217,
     "quality": "reported",
     "raw": "0.217",
     "column": "as run matrix!AA20",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA20. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.704,
     "max": 99.704,
     "quality": "reported",
     "raw": "0.984",
     "column": "as run matrix!AB20",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB20. NASA gives 0.984 atm; multiplied by 101.325."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "PMMA 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-05-11",
     "quality": "reported",
     "raw": "5/11/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/18",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 57",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 18,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "When he turned flow down to 40.5ish flame extinguished",
     "column": "as run matrix!AD21",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD21.",
     "evidence": "readjusted igniter again.  Fan 41 at 17:54:20 ish.   Very dim blue flame. When he turned flow down to 40.5ish flame extinguished.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.217,
     "max": 0.217,
     "quality": "reported",
     "raw": "0.217",
     "column": "as run matrix!AA21",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA21. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.704,
     "max": 99.704,
     "quality": "reported",
     "raw": "0.984",
     "column": "as run matrix!AB21",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB21. NASA gives 0.984 atm; multiplied by 101.325."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "PMMA 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-05-11",
     "quality": "reported",
     "raw": "5/11/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/19",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 110",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 19,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "Extinguished when flow turned off",
     "column": "as run matrix!AD22",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD22. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "bonus test.  LOS partway through burn. Don instructed to let it burn about 2 minutes then turn fan off.  Did not get playback during session.   Requested it. Fan cal done at end of session.   Playback occurred GMT 181:11:12. Started out all blue, got a pimple of soot.     Long sooty tail at high flow.  Extinguished when flow turned off.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 6.5,
     "max": 21,
     "quality": "reported",
     "raw": "6.5, 21",
     "column": "as run matrix!K22",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K22. NASA lists the speeds \"6.5, 21\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.217,
     "max": 0.217,
     "quality": "reported",
     "raw": "0.217",
     "column": "as run matrix!AA22",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA22. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.704,
     "max": 99.704,
     "quality": "reported",
     "raw": "0.984",
     "column": "as run matrix!AB22",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB22. NASA gives 0.984 atm; multiplied by 101.325."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "PMMA 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-05-11",
     "quality": "reported",
     "raw": "5/11/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/20",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 30",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 20,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "5.5",
     "column": "as run matrix!K23",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K23. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA 1 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Burned about 3 min",
     "column": "as run matrix!AD23",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD23. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "new 1 cm sphere. Got sooty quickly,  overexposed still images on main SLR camera.  Don has 2nd bonus camera set up too.,   Burned about 3 min.   Turbulent vapor jetting, quite sooty.  Change camera settings for next test.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.211722,
     "max": 0.211722,
     "quality": "reported",
     "raw": "=156.42/738.8",
     "column": "as run matrix!AA23",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA23. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =156.42/738.8."
    },
    "pressure_kpa": {
     "min": 98.499,
     "max": 98.499,
     "quality": "reported",
     "raw": "=738.8/760",
     "column": "as run matrix!AB23",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB23. NASA gives 0.97211 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =738.8/760."
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "PMMA 1 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-06-05",
     "quality": "reported",
     "raw": "6/5/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/21",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 31",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 21,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinguished when pot ~ 39",
     "column": "as run matrix!AD24",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD24.",
     "evidence": "ignited within 15 s (still hot?),   sooting by 35 s, fully engulfed by ~ 1 min.   Extinguished when pot ~ 39.  Camera settings much better.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 2,
     "max": 6,
     "quality": "reported",
     "raw": "6, 2",
     "column": "as run matrix!K24",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K24. NASA lists the speeds \"6, 2\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA 1 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.211722,
     "max": 0.211722,
     "quality": "reported",
     "raw": "=156.42/738.8",
     "column": "as run matrix!AA24",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA24. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =156.42/738.8."
    },
    "pressure_kpa": {
     "min": 98.499,
     "max": 98.499,
     "quality": "reported",
     "raw": "=738.8/760",
     "column": "as run matrix!AB24",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB24. NASA gives 0.97211 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =738.8/760."
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "PMMA 1 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-06-05",
     "quality": "reported",
     "raw": "6/5/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/22",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 32",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 22,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "All blue sphere just before extinction",
     "column": "as run matrix!AD25",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD25.",
     "evidence": "Don says sphere is ~ 0.7 cm.   Igniter has hot spot. Bar code 015M.  Nice images.  All blue sphere just before extinction.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 5,
     "quality": "reported",
     "raw": "5, 0",
     "column": "as run matrix!K25",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K25. NASA lists the speeds \"5, 0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA 1 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.211722,
     "max": 0.211722,
     "quality": "reported",
     "raw": "=156.42/738.8",
     "column": "as run matrix!AA25",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA25. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =156.42/738.8."
    },
    "pressure_kpa": {
     "min": 98.499,
     "max": 98.499,
     "quality": "reported",
     "raw": "=738.8/760",
     "column": "as run matrix!AB25",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB25. NASA gives 0.97211 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =738.8/760."
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "PMMA 1 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-06-05",
     "quality": "reported",
     "raw": "6/5/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/23",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 33",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 23,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 0,
     "max": 5,
     "quality": "reported",
     "raw": "5, 0",
     "column": "as run matrix!K26",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K26. NASA lists the speeds \"5, 0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA 1 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Ignited at 16:05",
     "column": "as run matrix!AD26",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD26. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "Igniter too far away 2st attempt 15:48. Igniter broke on 2nd attempt 15:51.   New igiter.  Ignited at 16:05 turned flow down to ~40.5 ish, and flame got very spherical, alternating blue and orange?(filter on)",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.211722,
     "max": 0.211722,
     "quality": "reported",
     "raw": "=156.42/738.8",
     "column": "as run matrix!AA26",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA26. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =156.42/738.8."
    },
    "pressure_kpa": {
     "min": 98.499,
     "max": 98.499,
     "quality": "reported",
     "raw": "=738.8/760",
     "column": "as run matrix!AB26",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB26. NASA gives 0.97211 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =738.8/760."
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "PMMA 1 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-06-05",
     "quality": "reported",
     "raw": "6/5/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/24",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 12-R",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 24,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "as run matrix!K27",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K27. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Nomex",
     "quality": "reported",
     "raw": "Nomex blend 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "Nomex blend 2 cm",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "did not ignite but smoked",
     "column": "as run matrix!AD27",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD27. NASA's observation says the sample did not ignite or keep a flame.",
     "evidence": "preheated by briefly heating igniter wire then hitting it full,   did not ignite but smoked .  He said it popped up about 1 mm due to residueal spring tension.  Will readjust it again.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.211722,
     "max": 0.211722,
     "quality": "reported",
     "raw": "=156.42/738.8",
     "column": "as run matrix!AA27",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA27. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =156.42/738.8."
    },
    "pressure_kpa": {
     "min": 98.499,
     "max": 98.499,
     "quality": "reported",
     "raw": "=738.8/760",
     "column": "as run matrix!AB27",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB27. NASA gives 0.97211 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =738.8/760."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "Nomex blend 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-06-05",
     "quality": "reported",
     "raw": "6/5/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/25",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 12-R2",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 25,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "as run matrix!K28",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K28. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Nomex",
     "quality": "reported",
     "raw": "Nomex blend 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "Nomex blend 2 cm",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "12 pulses and then on, no joy",
     "column": "as run matrix!AD28",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD28. NASA's observation says the sample did not ignite or keep a flame.",
     "evidence": "12 pulses and then on, no joy. Not even much smoke.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.211722,
     "max": 0.211722,
     "quality": "reported",
     "raw": "=156.42/738.8",
     "column": "as run matrix!AA28",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA28. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =156.42/738.8."
    },
    "pressure_kpa": {
     "min": 98.499,
     "max": 98.499,
     "quality": "reported",
     "raw": "=738.8/760",
     "column": "as run matrix!AB28",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB28. NASA gives 0.97211 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =738.8/760."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "Nomex blend 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-06-05",
     "quality": "reported",
     "raw": "6/5/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/26",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 46",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 26,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "extinguished when flow is turned off",
     "column": "as run matrix!AD29",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD29. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "sphere closer to nozzle. New igniter.  1st ign, flame died when turned down to 41, flickering to 40.   2nd ignition flame stabilized at 42 then 41.  grew to stokes flow envelope flame, N2 blew out stag region but flame remained side stabilized,   long burn , extinguished when flow is turned off.  Mostly blue, strenthening near end.  Still images have stag region out of fov, and only part of sample was burning?  Don commented on unusual soot pattern - waje still pristine, stagnation zone has discrete large opaque bubbles.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 9.5,
     "quality": "reported",
     "raw": "9.5, 0",
     "column": "as run matrix!K29",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K29. NASA lists the speeds \"9.5, 0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.211841,
     "max": 0.211841,
     "quality": "reported",
     "raw": "=158.73/749.29",
     "column": "as run matrix!AA29",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA29. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =158.73/749.29."
    },
    "pressure_kpa": {
     "min": 99.897,
     "max": 99.897,
     "quality": "reported",
     "raw": "=749.29/760",
     "column": "as run matrix!AB29",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB29. NASA gives 0.98591 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =749.29/760."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-06-11",
     "quality": "reported",
     "raw": "6/11/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/27",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 47",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 27,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 0,
     "max": 9,
     "quality": "reported",
     "raw": "9, 0",
     "column": "as run matrix!K30",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K30. NASA lists the speeds \"9, 0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Ignition at 9 cm/s (FAN 60)",
     "column": "as run matrix!AD30",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD30. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "moved sphere 1 cm downstream, readjusted igniter.  Repeat of previous test.  (Flame from GMT 15:05:30 to 15:10:50) Don adjusted sphere by sliding 1 cm downstream so the camera could capture the entire flame.  \nIgnition at 9 cm/s (FAN 60), reduced FAN indication to 42, then slowly to 41.  Turned nitrogen on full; flame opened up and became side stabilized.  Turned nitrogen off to allow flame to spread back to stagnation point.  Then slowly turned off flow.  Flame had only minimal amounts of soot, coinciding with bubble jetting.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.211841,
     "max": 0.211841,
     "quality": "reported",
     "raw": "=158.73/749.29",
     "column": "as run matrix!AA30",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA30. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =158.73/749.29."
    },
    "pressure_kpa": {
     "min": 99.897,
     "max": 99.897,
     "quality": "reported",
     "raw": "=749.29/760",
     "column": "as run matrix!AB30",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB30. NASA gives 0.98591 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =749.29/760."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-06-11",
     "quality": "reported",
     "raw": "6/11/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/28",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 48",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 28,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 0,
     "max": 9,
     "quality": "reported",
     "raw": "9, 0",
     "column": "as run matrix!K31",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K31. NASA lists the speeds \"9, 0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Ignition at 9 cm/s (FAN 60)",
     "column": "as run matrix!AD31",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD31. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "Flame from GMT 15:30:00 to 15:33:00) Ignition at 9 cm/s (FAN 60) then set FAN to 42, then slowly to 41.  After several minutes, shut flow off.  Fan was nice and blue and fairly stable.  Unfortunately, Don did not trigger the 35mm camera properly so there were no top images. But he did say he got images with his side view camera.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.211841,
     "max": 0.211841,
     "quality": "reported",
     "raw": "=158.73/749.29",
     "column": "as run matrix!AA31",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA31. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =158.73/749.29."
    },
    "pressure_kpa": {
     "min": 99.897,
     "max": 99.897,
     "quality": "reported",
     "raw": "=749.29/760",
     "column": "as run matrix!AB31",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB31. NASA gives 0.98591 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =749.29/760."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-06-11",
     "quality": "reported",
     "raw": "6/11/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/29",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 49",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 29,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "shut flow off.  Flame became very dim blue before extinguishing",
     "column": "as run matrix!AD32",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD32. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "(Flame from GMT 15:44:30 to 15:47:10) Ignition at 9 cm/s (FAN 60) then set FAN to 42, then slowly to 41.  After several minutes, shut flow off.  Flame became very dim blue before extinguishing.  Don’s observation: “There was a swelling action with the PMMA in which the fuel vapor coming from the sphere makes the flame swell.”",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 9,
     "quality": "reported",
     "raw": "9, 0",
     "column": "as run matrix!K32",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K32. NASA lists the speeds \"9, 0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.211841,
     "max": 0.211841,
     "quality": "reported",
     "raw": "=158.73/749.29",
     "column": "as run matrix!AA32",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA32. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =158.73/749.29."
    },
    "pressure_kpa": {
     "min": 99.897,
     "max": 99.897,
     "quality": "reported",
     "raw": "=749.29/760",
     "column": "as run matrix!AB32",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB32. NASA gives 0.98591 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =749.29/760."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-06-11",
     "quality": "reported",
     "raw": "6/11/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/30",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 22",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 30,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "At fan off, flame turns blue, and oscilates before extinction",
     "column": "as run matrix!AD33",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD33. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "Joe 1st day, ignited at 9.75 cm/s,  flame mostly envelope by end of ignition, turned flow slowly to 42, so lots of vapor jetting and soot.   At fan off, flame turns blue, and oscilates before extinction.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 9.75,
     "quality": "reported",
     "raw": "9.75, 0",
     "column": "as run matrix!K33",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K33. NASA lists the speeds \"9.75, 0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "1 cm sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.208896,
     "max": 0.208896,
     "quality": "reported",
     "raw": "=156.86/750.9",
     "column": "as run matrix!AA33",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA33. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =156.86/750.9."
    },
    "pressure_kpa": {
     "min": 100.112,
     "max": 100.112,
     "quality": "reported",
     "raw": "=750.9/760",
     "column": "as run matrix!AB33",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB33. NASA gives 0.98803 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =750.9/760."
    },
    "size_mm": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "1 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-06-14",
     "quality": "reported",
     "raw": "6/14/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/31",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 23",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 31,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "Fan off flame all blue and pulses a few times before extinguished",
     "column": "as run matrix!AD34",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD34. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "ignited at 10 cm/s, fan to 42,   less vapor jetting noted, bullet shaped flame, sooty.   Fan to 41, similar, slightly smaller flame.    Fan off flame all blue and pulses a few times before extinguished.  Jay saw cloud go by when he turned on fan at GMT 17:12 ish.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 10,
     "quality": "reported",
     "raw": "10, 0",
     "column": "as run matrix!K34",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K34. NASA lists the speeds \"10, 0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "1 cm sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.208896,
     "max": 0.208896,
     "quality": "reported",
     "raw": "=156.86/750.9",
     "column": "as run matrix!AA34",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA34. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =156.86/750.9."
    },
    "pressure_kpa": {
     "min": 100.112,
     "max": 100.112,
     "quality": "reported",
     "raw": "=750.9/760",
     "column": "as run matrix!AB34",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB34. NASA gives 0.98803 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =750.9/760."
    },
    "size_mm": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "1 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-06-14",
     "quality": "reported",
     "raw": "6/14/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/32",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 24",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 32,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "N2 and air off, turned all blue",
     "column": "as run matrix!AD35",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD35. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "adjusted igniter, start at 60, ignite, fan to 42, N2 on max, did not blow out even leading edge, N2 and air off, turned all blue, he turned lights on before flame completely out.  42 digital images, last one shows blue spherical flame with finger of soot through it.   Oly about 1 mm x 3 mm left around rod.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 10,
     "quality": "reported",
     "raw": "10, 0",
     "column": "as run matrix!K35",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K35. NASA lists the speeds \"10, 0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "1 cm sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.208896,
     "max": 0.208896,
     "quality": "reported",
     "raw": "=156.86/750.9",
     "column": "as run matrix!AA35",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA35. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =156.86/750.9."
    },
    "pressure_kpa": {
     "min": 100.112,
     "max": 100.112,
     "quality": "reported",
     "raw": "=750.9/760",
     "column": "as run matrix!AB35",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB35. NASA gives 0.98803 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =750.9/760."
    },
    "size_mm": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "1 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-06-14",
     "quality": "reported",
     "raw": "6/14/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/33",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 25",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 33,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "fuel ran out and flame extinguished",
     "column": "as run matrix!AD36",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD36.",
     "evidence": "adjusted igniter, ignited at 43,  he started to turn fan down when fuel ran out and flame extinguished.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "4",
     "column": "as run matrix!K36",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K36. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "1 cm sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.208896,
     "max": 0.208896,
     "quality": "reported",
     "raw": "=156.86/750.9",
     "column": "as run matrix!AA36",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA36. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =156.86/750.9."
    },
    "pressure_kpa": {
     "min": 100.112,
     "max": 100.112,
     "quality": "reported",
     "raw": "=750.9/760",
     "column": "as run matrix!AB36",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB36. NASA gives 0.98803 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =750.9/760."
    },
    "size_mm": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "1 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-06-14",
     "quality": "reported",
     "raw": "6/14/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/34",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 58",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 34,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 4,
     "max": 9,
     "quality": "reported",
     "raw": "6, 4, 9",
     "column": "as run matrix!K37",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K37. NASA lists the speeds \"6, 4, 9\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Ignited quickly, all blue, spread slowly upstream",
     "column": "as run matrix!AD37",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD37. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "Joe, multiops procedures.  Nice over the shoulder view.  Ignited quickly, all blue, spread slowly upstream.  Got sooty at 3.5 minutes, burned for ~ 4.75 min.  Not wrapped all the way.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.217486,
     "max": 0.217486,
     "quality": "reported",
     "raw": "=(161.34/(580.5+161.34))",
     "column": "as run matrix!AA37",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA37. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =(161.34/(580.5+161.34))."
    },
    "pressure_kpa": {
     "min": 98.904,
     "max": 98.904,
     "quality": "reported",
     "raw": "=(580.5+161.34)/760",
     "column": "as run matrix!AB37",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB37. NASA gives 0.97611 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =(580.5+161.34)/760."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-06-18",
     "quality": "reported",
     "raw": "6/18/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/35",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 59",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 35,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 0,
     "max": 11,
     "quality": "reported",
     "raw": "6.5, 11, 0",
     "column": "as run matrix!K38",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K38. NASA lists the speeds \"6.5, 11, 0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "4 minute burn",
     "column": "as run matrix!AD38",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD38. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "sooty at 1:15 , 4 minute burn, got long sooty tail, didn't quite wrap around to stag zone,  nice symmetric flame, over the shoulder view shows nice image of flame through msg window.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.217486,
     "max": 0.217486,
     "quality": "reported",
     "raw": "=(161.34/(580.5+161.34))",
     "column": "as run matrix!AA38",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA38. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =(161.34/(580.5+161.34))."
    },
    "pressure_kpa": {
     "min": 98.904,
     "max": 98.904,
     "quality": "reported",
     "raw": "=(580.5+161.34)/760",
     "column": "as run matrix!AB38",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB38. NASA gives 0.97611 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =(580.5+161.34)/760."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-06-18",
     "quality": "reported",
     "raw": "6/18/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/36",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 60",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 36,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "then flow off goes out",
     "column": "as run matrix!AD39",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD39. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "started all blue, got sooty tail , wrapped all the way around to stagnation region/envelope flame  at ~6 minutes, then flow off goes out.  Nice long test. Could see it in over the shoulder view once it got sooty.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 7,
     "quality": "reported",
     "raw": "7, 2, 0",
     "column": "as run matrix!K39",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K39. NASA lists the speeds \"7, 2, 0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.217486,
     "max": 0.217486,
     "quality": "reported",
     "raw": "=(161.34/(580.5+161.34))",
     "column": "as run matrix!AA39",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA39. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =(161.34/(580.5+161.34))."
    },
    "pressure_kpa": {
     "min": 98.904,
     "max": 98.904,
     "quality": "reported",
     "raw": "=(580.5+161.34)/760",
     "column": "as run matrix!AB39",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB39. NASA gives 0.97611 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =(580.5+161.34)/760."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-06-18",
     "quality": "reported",
     "raw": "6/18/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/37",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 61",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 37,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "Extinguished with flow off",
     "column": "as run matrix!AD40",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD40. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "Ignited and turned flow down, then N2 on while flame was small and blue.    Flame did not go out completely, but only seemed to spread on the top side of the video view.  It wrapped around quite far on top, but not quite to stag. Region.  Turned N2 off and flame grew and got sottier.  Extinguished with flow off at6.75 minutes or so.  Joe asked about why N2 didn't put out flame.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 2,
     "max": 6.5,
     "quality": "reported",
     "raw": "6.5, 2",
     "column": "as run matrix!K40",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K40. NASA lists the speeds \"6.5, 2\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.217486,
     "max": 0.217486,
     "quality": "reported",
     "raw": "=(161.34/(580.5+161.34))",
     "column": "as run matrix!AA40",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA40. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =(161.34/(580.5+161.34))."
    },
    "pressure_kpa": {
     "min": 98.904,
     "max": 98.904,
     "quality": "reported",
     "raw": "=(580.5+161.34)/760",
     "column": "as run matrix!AB40",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB40. NASA gives 0.97611 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =(580.5+161.34)/760."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-06-18",
     "quality": "reported",
     "raw": "6/18/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/38",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 5",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 38,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinguished at fan 41",
     "column": "as run matrix!AD41",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD41.",
     "evidence": "ignite at 5 cm/s, reduce to 3, 1.5, 1.  Extinguished at fan 41, became circular at extinction, sphere shrank to extinction.  About 2.5 cm left, could use for an opposed flow test.  Sample 9 used instead of sample 8.  Playback of stills.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 5.75,
     "max": 5.75,
     "quality": "reported",
     "raw": "5.75,",
     "column": "as run matrix!K41",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K41. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.219834,
     "max": 0.219834,
     "quality": "reported",
     "raw": "=(163.15)/(163.15+579)",
     "column": "as run matrix!AA41",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA41. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =(163.15)/(163.15+579)."
    },
    "pressure_kpa": {
     "min": 98.945,
     "max": 98.945,
     "quality": "reported",
     "raw": "=(163.15+579)/760",
     "column": "as run matrix!AB41",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB41. NASA gives 0.97651 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =(163.15+579)/760."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-06-28",
     "quality": "reported",
     "raw": "6/28/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/39",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 14",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 39,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "extinguished within 1 cm of the end of the sample",
     "column": "p. 27",
     "note": "From NASA's file NTRS-20140011099.pdf, p. 27. The slide describes the Nomex III sample that burned on ISS (22% O2, 1 atm, 14 to 15 cm/s) without a test number. NASA's as-run matrix has one Nomex III test that ignited, Test 14 (air display 14.5; comment \"Flame propagated to ~ 1 cm of end\"); the other, Test 15, did not ignite. So the slide is matched to Test 14.",
     "evidence": "Nomex III sample residue after nearly complete concurrent propagation at 15 cm/s on ISS. Flame was shrinking in width until it extinguished within 1 cm of the end of the sample, as its width became smaller than ~ 1 cm, which is on the scale of a fingering flamelet.",
     "evidence_source": "file:NTRS-20140011099.pdf"
    },
    "flow_speed_cm_s": {
     "min": 14.5,
     "max": 14.5,
     "quality": "reported",
     "raw": "14.5",
     "column": "as run matrix!K42",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K42. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Nomex",
     "quality": "reported",
     "raw": "Nomex III Natural",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "Nomex III Natural",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Flame propagated to ~ 1 cm of end",
     "column": "as run matrix!AD42",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD42. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "ignited and left igniter on until flame spread away.    Flame propagated to ~ 1 cm of end.   Don showed  image of it, spread only in center of sample, maybe 1 cm wide, and got narrower once igniter was off.   Don says he saw smoke stream (laminar) from igniter diverts upward around flame and comes back down downstream.  Showed image at GMT 16:41.  Playback of stills.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.219834,
     "max": 0.219834,
     "quality": "reported",
     "raw": "=(163.15)/(163.15+579)",
     "column": "as run matrix!AA42",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA42. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =(163.15)/(163.15+579)."
    },
    "pressure_kpa": {
     "min": 98.945,
     "max": 98.945,
     "quality": "reported",
     "raw": "=(163.15+579)/760",
     "column": "as run matrix!AB42",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB42. NASA gives 0.97651 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =(163.15+579)/760."
    },
    "test_date": {
     "text": "2012-06-28",
     "quality": "reported",
     "raw": "6/28/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/40",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 66",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 40,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "Flame extinguished all by itself",
     "column": "as run matrix!AD43",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD43.",
     "evidence": "Ignition was very quick, and very sooty.  Flame wrapped around stagnation zone,   Lots of vapor jetting.  Turned flow to 46, turned all blue and vapor jetting fades away.  Flame seems to reach a ss size, and propagates very slowly downstream (base burnout).     Flame extinguished all by itself.   Top view image playback showed nearly spherical blue flame.  SAmple has sooty streak downstream all along sample.  Don examined sample,  2-3 mm of material completely consumed,   Circular burnout base, and then depression (like fingernail scrape) about 12-13 mm downstream before full cross section of fuel.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 4,
     "max": 10,
     "quality": "reported",
     "raw": "10, 4",
     "column": "as run matrix!K43",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K43. NASA lists the speeds \"10, 4\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA slab",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "PMMA slab",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.219834,
     "max": 0.219834,
     "quality": "reported",
     "raw": "=(163.15)/(163.15+579)",
     "column": "as run matrix!AA43",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA43. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =(163.15)/(163.15+579)."
    },
    "pressure_kpa": {
     "min": 98.945,
     "max": 98.945,
     "quality": "reported",
     "raw": "=(163.15+579)/760",
     "column": "as run matrix!AB43",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB43. NASA gives 0.97651 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =(163.15+579)/760."
    },
    "test_date": {
     "text": "2012-06-28",
     "quality": "reported",
     "raw": "6/28/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/41",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 67",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 41,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA slab",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "PMMA slab",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.219834,
     "max": 0.219834,
     "quality": "reported",
     "raw": "=(163.15)/(163.15+579)",
     "column": "as run matrix!AA44",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA44. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =(163.15)/(163.15+579)."
    },
    "pressure_kpa": {
     "min": 98.945,
     "max": 98.945,
     "quality": "reported",
     "raw": "=(163.15+579)/760",
     "column": "as run matrix!AB44",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB44. NASA gives 0.97651 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =(163.15+579)/760."
    },
    "test_date": {
     "text": "2012-06-28",
     "quality": "reported",
     "raw": "6/28/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/42",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 34",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 42,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "extinction when air flow off",
     "column": "as run matrix!AD45",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD45. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "Ign at low flow (41.5 fan, ~ 1 cm/s).  Quite spread by end of ignition, very dim blue.   Became sooty and then vapor jetting very strongly, creating large dark particulate blobs that drift very slwoly downstream.  Once fuel heated, vapor jetting was reduced.  N2 on and flame brightened and stabilized, extinction when air flow off.  Don played back videos and commented on vortex rings during vapor jetting at these low flows.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "as run matrix!K45",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K45. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "1 cm sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.218944,
     "max": 0.218944,
     "quality": "reported",
     "raw": "=164.23/750.1",
     "column": "as run matrix!AA45",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA45. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =164.23/750.1."
    },
    "pressure_kpa": {
     "min": 100.005,
     "max": 100.005,
     "quality": "reported",
     "raw": "=750.1/760",
     "column": "as run matrix!AB45",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB45. NASA gives 0.98697 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =750.1/760."
    },
    "size_mm": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "1 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-06-29",
     "quality": "reported",
     "raw": "6/29/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/43",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 35",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 43,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Burned out completely",
     "column": "as run matrix!AD46",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD46.",
     "evidence": "long ignition, fully engulfed by the end.  Very slow flow, not much vapor jetting.   Burned out completely.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "as run matrix!K46",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K46. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "1 cm sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.218944,
     "max": 0.218944,
     "quality": "reported",
     "raw": "=164.23/750.1",
     "column": "as run matrix!AA46",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA46. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =164.23/750.1."
    },
    "pressure_kpa": {
     "min": 100.005,
     "max": 100.005,
     "quality": "reported",
     "raw": "=750.1/760",
     "column": "as run matrix!AB46",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB46. NASA gives 0.98697 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =750.1/760."
    },
    "size_mm": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "1 cm sphere",
     "column": "Fuel Sample Material"
    }
   }
  },
  {
   "id": "PSI-26/bass/44",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 16",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 44,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 14.5,
     "max": 14.5,
     "quality": "reported",
     "raw": "14.5",
     "column": "as run matrix!K47",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K47. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Ultem",
     "quality": "reported",
     "raw": "ultem sheet",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sheet",
     "quality": "reported",
     "raw": "ultem sheet",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "just smoked slightly, no ignition",
     "column": "as run matrix!AD47",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD47. NASA's observation says the sample did not ignite or keep a flame.",
     "evidence": "just smoked slightly, no ignition.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.218944,
     "max": 0.218944,
     "quality": "reported",
     "raw": "=164.23/750.1",
     "column": "as run matrix!AA47",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA47. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =164.23/750.1."
    },
    "pressure_kpa": {
     "min": 100.005,
     "max": 100.005,
     "quality": "reported",
     "raw": "=750.1/760",
     "column": "as run matrix!AB47",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB47. NASA gives 0.98697 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =750.1/760."
    },
    "test_date": {
     "text": "2012-06-29",
     "quality": "reported",
     "raw": "6/29/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/45",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 5b",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 45,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "seemed to quench 5 mm from the end",
     "column": "as run matrix!AD48",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD48.",
     "evidence": "Using preburned sample in opposed flow config to see if flame will spread upstream.  Ignited and spread a bit on top side only,  seemed to quench 5 mm from the end.  Curved flame leading edge.   Don's last run.   He had some nice words about the hands-on features of these combustion experiments.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "SIBAL 2 cm, opposed flow",
     "column": "as run matrix!F48",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!F48. The word is in the material cell."
    },
    "flow_speed_cm_s": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "as run matrix!K48",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K48. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "SIBAL 2 cm opposed flow",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "SIBAL 2 cm opposed flow",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.218944,
     "max": 0.218944,
     "quality": "reported",
     "raw": "=164.23/750.1",
     "column": "as run matrix!AA48",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA48. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =164.23/750.1."
    },
    "pressure_kpa": {
     "min": 100.005,
     "max": 100.005,
     "quality": "reported",
     "raw": "=750.1/760",
     "column": "as run matrix!AB48",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB48. NASA gives 0.98697 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =750.1/760."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "SIBAL 2 cm opposed flow",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-06-29",
     "quality": "reported",
     "raw": "6/29/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/46",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 6",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 46,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "burned out whole sample",
     "column": "as run matrix!AD49",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD49.",
     "evidence": "opposed flow flame test,  steady spread at 9 cm/s! started turning down flow late, but didn't complete change before burned out whole sample.  This doesn't burn in 1g like this.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "5, opposed flow",
     "column": "as run matrix!I49",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!I49. The word is in the sample distance cell."
    },
    "flow_speed_cm_s": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "as run matrix!K49",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K49. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.222199,
     "max": 0.222199,
     "quality": "reported",
     "raw": "=166.76/750.5",
     "column": "as run matrix!AA49",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA49. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =166.76/750.5."
    },
    "pressure_kpa": {
     "min": 100.058,
     "max": 100.058,
     "quality": "reported",
     "raw": "=750.5/760",
     "column": "as run matrix!AB49",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB49. NASA gives 0.9875 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =750.5/760."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-07-03",
     "quality": "reported",
     "raw": "7/3/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/47",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 82",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 47,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Flame extinguished when fan set to 40",
     "column": "as run matrix!AD50",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD50.",
     "evidence": "1st candle test!  Bracketing,    very sooty flame,   18 brackets.  Flame extinguished when fan set to 40.  All blue briefly before that.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "fuel": {
     "text": "Wax",
     "quality": "reported",
     "raw": "candle",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "candle",
     "quality": "reported",
     "raw": "candle",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.222199,
     "max": 0.222199,
     "quality": "reported",
     "raw": "=166.76/750.5",
     "column": "as run matrix!AA50",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA50. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =166.76/750.5."
    },
    "pressure_kpa": {
     "min": 100.058,
     "max": 100.058,
     "quality": "reported",
     "raw": "=750.5/760",
     "column": "as run matrix!AB50",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB50. NASA gives 0.9875 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =750.5/760."
    },
    "test_date": {
     "text": "2012-07-03",
     "quality": "reported",
     "raw": "7/3/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/48",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 82a",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 48,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Out at 40 again",
     "column": "as run matrix!AD51",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD51.",
     "evidence": "BG-7 filter on camera for bracketing set.  Smaller flame,  no problem re-igniting.   Out at 40 again.   1 shy of 13 brackets",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "fuel": {
     "text": "Wax",
     "quality": "reported",
     "raw": "candle",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "candle",
     "quality": "reported",
     "raw": "candle",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.222199,
     "max": 0.222199,
     "quality": "reported",
     "raw": "=166.76/750.5",
     "column": "as run matrix!AA51",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA51. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =166.76/750.5."
    },
    "pressure_kpa": {
     "min": 100.058,
     "max": 100.058,
     "quality": "reported",
     "raw": "=750.5/760",
     "column": "as run matrix!AB51",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB51. NASA gives 0.9875 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =750.5/760."
    },
    "test_date": {
     "text": "2012-07-03",
     "quality": "reported",
     "raw": "7/3/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/49",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 82b",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 49,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Burned to completion",
     "column": "as run matrix!AD52",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD52.",
     "evidence": "same candle, no filter, changed iso.  Burned to completion.  Frayed wick glowing in flame zone (fuel drying out)",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "as run matrix!K52",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K52. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Wax",
     "quality": "reported",
     "raw": "candle",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "candle",
     "quality": "reported",
     "raw": "candle",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.222199,
     "max": 0.222199,
     "quality": "reported",
     "raw": "=166.76/750.5",
     "column": "as run matrix!AA52",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA52. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =166.76/750.5."
    },
    "pressure_kpa": {
     "min": 100.058,
     "max": 100.058,
     "quality": "reported",
     "raw": "=750.5/760",
     "column": "as run matrix!AB52",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB52. NASA gives 0.9875 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =750.5/760."
    },
    "test_date": {
     "text": "2012-07-03",
     "quality": "reported",
     "raw": "7/3/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/50",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 68",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 50,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "Self-extinguished",
     "column": "as run matrix!AD53",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD53.",
     "evidence": "re-ignite slightly downstream where black and transparent meet. Tiny blue flame.   Self-extinguished.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "6",
     "column": "as run matrix!K53",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K53. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "pmma slab",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "pmma slab",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.222199,
     "max": 0.222199,
     "quality": "reported",
     "raw": "=166.76/750.5",
     "column": "as run matrix!AA53",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA53. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =166.76/750.5."
    },
    "pressure_kpa": {
     "min": 100.058,
     "max": 100.058,
     "quality": "reported",
     "raw": "=750.5/760",
     "column": "as run matrix!AB53",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB53. NASA gives 0.9875 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =750.5/760."
    },
    "test_date": {
     "text": "2012-07-03",
     "quality": "reported",
     "raw": "7/3/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/51",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 69",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 51,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "got a brief flame a few times, but went out",
     "column": "as run matrix!AD54",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD54.",
     "evidence": "igniter 15-1 broke during setup, put in 15-5.   Tried igniting at least 5 x,   got a brief flame a few times, but went out.  He is moving sample upstream to get igniter over more fuel.  Igniter is broken again.  Moving on to next sample.   Interesting note:   radiometer spikes each time he turns on the igniter, even when it is broken.   Ground loop?",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "as run matrix!K54",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K54. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "pmma slab",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "pmma slab",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.223838,
     "max": 0.223838,
     "quality": "reported",
     "raw": "=168.08/750.9",
     "column": "as run matrix!AA54",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA54. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =168.08/750.9."
    },
    "pressure_kpa": {
     "min": 100.112,
     "max": 100.112,
     "quality": "reported",
     "raw": "=750.9/760",
     "column": "as run matrix!AB54",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB54. NASA gives 0.98803 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =750.9/760."
    },
    "test_date": {
     "text": "2012-07-12",
     "quality": "reported",
     "raw": "7/12/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/52",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 111",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 52,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "turned off air flow and flame went out",
     "column": "as run matrix!AD55",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD55. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "ignited on 3rd try,   started getting sooty, then turned on N2.   weakened briefly then got sooty again.   Slowly turned up GN2 to max, and flame got weak and all blue, flashed a bit and got smaller.   Then it strengthened again and got sooty.   Turned off GN2 and flame strengthened, then turned off air flow and flame went out.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "as run matrix!K55",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K55. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm sphere wake ign",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm sphere wake ign",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.223838,
     "max": 0.223838,
     "quality": "reported",
     "raw": "=168.08/750.9",
     "column": "as run matrix!AA55",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA55. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =168.08/750.9."
    },
    "pressure_kpa": {
     "min": 100.112,
     "max": 100.112,
     "quality": "reported",
     "raw": "=750.9/760",
     "column": "as run matrix!AB55",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB55. NASA gives 0.98803 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =750.9/760."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm sphere wake ign",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-07-12",
     "quality": "reported",
     "raw": "7/12/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/53",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 112",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 53,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "air off, flame out",
     "column": "as run matrix!AD56",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD56. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "ignited after a few tries,   turned N2 on 5.0 pot, flame still very sooty but only on top half of sphere in video,   fan to 42, still sooty but dimmer, fan 41, similar.  Leading edge all the way to the post,   N2 Off,  soot moves upstream,   air off, flame out,   6 minute burn!",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "as run matrix!K56",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K56. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm sphere wake ign",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm sphere wake ign",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.223838,
     "max": 0.223838,
     "quality": "reported",
     "raw": "=168.08/750.9",
     "column": "as run matrix!AA56",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA56. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =168.08/750.9."
    },
    "pressure_kpa": {
     "min": 100.112,
     "max": 100.112,
     "quality": "reported",
     "raw": "=750.9/760",
     "column": "as run matrix!AB56",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB56. NASA gives 0.98803 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =750.9/760."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm sphere wake ign",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-07-12",
     "quality": "reported",
     "raw": "7/12/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/54",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 113",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 54,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "GN2 on max did not blow it out right away, but did eventually extinguish it",
     "column": "as run matrix!AD57",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD57. NASA says the nitrogen flow put the flame out, not the air flow.",
     "evidence": "ignited at 62, fan up to 87 then 100,   got long sooty tail, comet.   Envelope flame, very bright and sooty,   then fan to 42, blue LE and sooty tail.   Fan 41, slightly dimmer but still sooty tail.   Joe turned pot to 0.32 (read after) to get minimum flame (very dim blue LE only),    GN2 on max did not blow it out right away, but did eventually extinguish it.  LE blew off and ring flame stabilized for a number of s.   Card full on still camera.  Didn't seem to get the GN2 on the digital stills.  Leaving igniter in msg.  Still fuel left.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "as run matrix!K57",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K57. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm sphere wake ign",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm sphere wake ign",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.223838,
     "max": 0.223838,
     "quality": "reported",
     "raw": "=168.08/750.9",
     "column": "as run matrix!AA57",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA57. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =168.08/750.9."
    },
    "pressure_kpa": {
     "min": 100.112,
     "max": 100.112,
     "quality": "reported",
     "raw": "=750.9/760",
     "column": "as run matrix!AB57",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB57. NASA gives 0.98803 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =750.9/760."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm sphere wake ign",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-07-12",
     "quality": "reported",
     "raw": "7/12/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/55",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 2",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 55,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 9,
     "max": 44,
     "quality": "reported",
     "raw": "9, 44",
     "column": "as run matrix!K58",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K58. NASA lists the speeds \"9, 44\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Did not blow out",
     "column": "as run matrix!AD58",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD58. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "N2 repress going on during this ops ~ 3 mm Hg.  Joe helping out.  Did not blow out.  Fan increased a bit slowly, so only got to max flow near end.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.22722,
     "max": 0.22722,
     "quality": "reported",
     "raw": "=171.81/756.14",
     "column": "as run matrix!AA58",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA58. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =171.81/756.14."
    },
    "pressure_kpa": {
     "min": 100.81,
     "max": 100.81,
     "quality": "reported",
     "raw": "=756.14/760",
     "column": "as run matrix!AB58",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB58. NASA gives 0.99492 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =756.14/760."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-07-19",
     "quality": "reported",
     "raw": "7/19/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/56",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 3",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 56,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 10,
     "max": 44,
     "quality": "reported",
     "raw": "10, 20, 44",
     "column": "as run matrix!K59",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K59. NASA lists the speeds \"10, 20, 44\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Did not blow out",
     "column": "as run matrix!AD59",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD59. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "Did not blow out.  Got smaller at max flow,  still images show one half of flame (maybe both sides) went out.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.226737,
     "max": 0.226737,
     "quality": "reported",
     "raw": "=173/763",
     "column": "as run matrix!AA59",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA59. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =173/763."
    },
    "pressure_kpa": {
     "min": 101.725,
     "max": 101.725,
     "quality": "reported",
     "raw": "=763/760",
     "column": "as run matrix!AB59",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB59. NASA gives 1.00395 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =763/760."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-07-19",
     "quality": "reported",
     "raw": "7/19/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/57",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 15",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 57,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 30,
     "max": 30,
     "quality": "reported",
     "raw": "30",
     "column": "as run matrix!K60",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K60. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Nomex",
     "quality": "reported",
     "raw": "nomex natural III",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "nomex natural III",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "Did not ignite",
     "column": "as run matrix!AD60",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD60. NASA's observation says the sample did not ignite or keep a flame.",
     "evidence": "leave igniter on entire test to provide additional heat to flame.  Did not ignite.  Not even any smoke.  Flow too high?",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.225255,
     "max": 0.225255,
     "quality": "reported",
     "raw": "=172.5/765.8",
     "column": "as run matrix!AA60",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA60. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =172.5/765.8."
    },
    "pressure_kpa": {
     "min": 102.098,
     "max": 102.098,
     "quality": "reported",
     "raw": "=765.8/760",
     "column": "as run matrix!AB60",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB60. NASA gives 1.00763 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =765.8/760."
    },
    "test_date": {
     "text": "2012-07-19",
     "quality": "reported",
     "raw": "7/19/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/58",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 13",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 58,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "brief ignition and extinguished in ~ 3 s",
     "column": "as run matrix!AD61",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD61.",
     "evidence": "brief ignition and extinguished in ~ 3 s.  No spread.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 15,
     "max": 15,
     "quality": "reported",
     "raw": "15",
     "column": "as run matrix!K61",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K61. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Nomex",
     "quality": "reported",
     "raw": "Nomex blend 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "Nomex blend 2 cm",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.225255,
     "max": 0.225255,
     "quality": "reported",
     "raw": "=172.5/765.8",
     "column": "as run matrix!AA61",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA61. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =172.5/765.8."
    },
    "pressure_kpa": {
     "min": 102.098,
     "max": 102.098,
     "quality": "reported",
     "raw": "=765.8/760",
     "column": "as run matrix!AB61",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB61. NASA gives 1.00763 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =765.8/760."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "Nomex blend 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-07-19",
     "quality": "reported",
     "raw": "7/19/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/59",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 17",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 59,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "brief ignition and extinguished after 4 seconds",
     "column": "as run matrix!AD62",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD62.",
     "evidence": "brief ignition and extinguished after 4 seconds.  No spread.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "as run matrix!K62",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K62. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Ultem",
     "quality": "reported",
     "raw": "ultem sheet",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sheet",
     "quality": "reported",
     "raw": "ultem sheet",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.225255,
     "max": 0.225255,
     "quality": "reported",
     "raw": "=172.5/765.8",
     "column": "as run matrix!AA62",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA62. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =172.5/765.8."
    },
    "pressure_kpa": {
     "min": 102.098,
     "max": 102.098,
     "quality": "reported",
     "raw": "=765.8/760",
     "column": "as run matrix!AB62",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB62. NASA gives 1.00763 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =765.8/760."
    },
    "test_date": {
     "text": "2012-07-19",
     "quality": "reported",
     "raw": "7/19/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/60",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 114",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 60,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 6.5,
     "max": 6.5,
     "quality": "reported",
     "raw": "6.5",
     "column": "as run matrix!K63",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K63. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "pmma sphere",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "pmma sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.225072,
     "max": 0.225072,
     "quality": "reported",
     "raw": "=172.36/765.8",
     "column": "as run matrix!AA63",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA63. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =172.36/765.8."
    },
    "pressure_kpa": {
     "min": 102.098,
     "max": 102.098,
     "quality": "reported",
     "raw": "=765.8/760",
     "column": "as run matrix!AB63",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB63. NASA gives 1.00763 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =765.8/760."
    },
    "test_date": {
     "text": "2012-07-19",
     "quality": "reported",
     "raw": "7/19/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/61",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 62",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 61,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 10,
     "max": 44,
     "quality": "reported",
     "raw": "10, 44",
     "column": "as run matrix!K64",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K64. NASA lists the speeds \"10, 44\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Did not blow out either at high flow or with GN2",
     "column": "as run matrix!AD64",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD64. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "igniter 2-6 unstowed as broken, so no more std size igniters. 1 ea of short and long left.  Ignition was prolonged, and so flame was strong when flow turned up.   Did not blow out either at high flow or with GN2 although stagnation region blew out.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.225835,
     "max": 0.225835,
     "quality": "reported",
     "raw": "=173.13/766.62",
     "column": "as run matrix!AA64",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA64. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =173.13/766.62."
    },
    "pressure_kpa": {
     "min": 102.208,
     "max": 102.208,
     "quality": "reported",
     "raw": "=766.62/760",
     "column": "as run matrix!AB64",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB64. NASA gives 1.00871 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =766.62/760."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-07-23",
     "quality": "reported",
     "raw": "7/23/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/62",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 63",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 62,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "as run matrix!K65",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K65. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "blew out bottom half, but not top half",
     "column": "as run matrix!AD65",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD65. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "try blowing out the flame with GN2. blew out bottom half, but not top half.  Could see where the leading edge gradually blew out with incre GN2",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.225835,
     "max": 0.225835,
     "quality": "reported",
     "raw": "=173.13/766.62",
     "column": "as run matrix!AA65",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA65. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =173.13/766.62."
    },
    "pressure_kpa": {
     "min": 102.208,
     "max": 102.208,
     "quality": "reported",
     "raw": "=766.62/760",
     "column": "as run matrix!AB65",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB65. NASA gives 1.00871 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =766.62/760."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-07-23",
     "quality": "reported",
     "raw": "7/23/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/63",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 64",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 63,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "blowoff",
     "quality": "reported",
     "raw": "flame did blow out with GN2 at about a pot 6",
     "column": "as run matrix!AD66",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD66. NASA says the flame blew out when nitrogen was added (GN2 pot about 6), not from the air flow alone.",
     "evidence": "flame did blow out with GN2 at about a pot 6.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "as run matrix!K66",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K66. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.225835,
     "max": 0.225835,
     "quality": "reported",
     "raw": "=173.13/766.62",
     "column": "as run matrix!AA66",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA66. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =173.13/766.62."
    },
    "pressure_kpa": {
     "min": 102.208,
     "max": 102.208,
     "quality": "reported",
     "raw": "=766.62/760",
     "column": "as run matrix!AB66",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB66. NASA gives 1.00871 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =766.62/760."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-07-23",
     "quality": "reported",
     "raw": "7/23/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/64",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 65",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 64,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "as run matrix!K67",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K67. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "flame strong enough did not blow out at 10",
     "column": "as run matrix!AD67",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD67. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "1,2,3,3.5,5, 6, 10 pot on GN2.  Stag blew out at 3.5,  flame strong enough did not blow out at 10.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.225835,
     "max": 0.225835,
     "quality": "reported",
     "raw": "=173.13/766.62",
     "column": "as run matrix!AA67",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA67. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =173.13/766.62."
    },
    "pressure_kpa": {
     "min": 102.208,
     "max": 102.208,
     "quality": "reported",
     "raw": "=766.62/760",
     "column": "as run matrix!AB67",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB67. NASA gives 1.00871 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =766.62/760."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-07-23",
     "quality": "reported",
     "raw": "7/23/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/65",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 118",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 65,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.225835,
     "max": 0.225835,
     "quality": "reported",
     "raw": "=173.13/766.62",
     "column": "as run matrix!AA68",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA68. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =173.13/766.62."
    },
    "pressure_kpa": {
     "min": 102.208,
     "max": 102.208,
     "quality": "reported",
     "raw": "=766.62/760",
     "column": "as run matrix!AB68",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB68. NASA gives 1.00871 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =766.62/760."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-07-23",
     "quality": "reported",
     "raw": "7/23/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/67",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 11",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 67,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "20",
     "column": "as run matrix!K70",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K70. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "SIBAL 1 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "SIBAL 1 cm",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "nice burn",
     "column": "as run matrix!AD70",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD70. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "nice burn, left igniter on a bit long and then on again.     Camera set to GMT, not MSG.  Appeared to reach a ss size ~ 3 cm long.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.215162,
     "max": 0.215162,
     "quality": "reported",
     "raw": "=162/752.92",
     "column": "as run matrix!AA70",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA70. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =162/752.92."
    },
    "pressure_kpa": {
     "min": 100.381,
     "max": 100.381,
     "quality": "reported",
     "raw": "=752.92/760",
     "column": "as run matrix!AB70",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB70. NASA gives 0.99068 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =752.92/760."
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "SIBAL 1 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-08-09",
     "quality": "reported",
     "raw": "8/9/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/68",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 9",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 68,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "shrank but kept going to end of sample",
     "column": "as run matrix!AD71",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD71. NASA says the flame \"kept going to end of sample\". Read as: the sample burned to the end.",
     "evidence": "sample 7 apparently not used.   (Don supposedly used on 5/10),   flame kept going.  At lowest flows shrank but kept going to end of sample.  Became oval away from edges at lowest flows.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10,",
     "column": "as run matrix!K71",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K71. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.215792,
     "max": 0.215792,
     "quality": "reported",
     "raw": "=162.47/752.9",
     "column": "as run matrix!AA71",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA71. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =162.47/752.9."
    },
    "pressure_kpa": {
     "min": 100.378,
     "max": 100.378,
     "quality": "reported",
     "raw": "=752.9/760",
     "column": "as run matrix!AB71",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB71. NASA gives 0.99066 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =752.9/760."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "SIBAL 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-08-09",
     "quality": "reported",
     "raw": "8/9/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/69",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 102",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 69,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "as run matrix!K72",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K72. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.215792,
     "max": 0.215792,
     "quality": "reported",
     "raw": "=162.47/752.9",
     "column": "as run matrix!AA72",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA72. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =162.47/752.9."
    },
    "pressure_kpa": {
     "min": 100.378,
     "max": 100.378,
     "quality": "reported",
     "raw": "=752.9/760",
     "column": "as run matrix!AB72",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB72. NASA gives 0.99066 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =752.9/760."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "PMMA sphere 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2012-08-09",
     "quality": "reported",
     "raw": "8/9/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/70",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 83a",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 70,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "soot disappeared then flame went out",
     "column": "as run matrix!AD73",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD73.",
     "evidence": "Over the shoulder view.  iso auto control on, max sensitivity 3200 iso, min shutter 1/4s, shutter hold 5 s. new igniter, have to bend it into shape.  Did not ignite first 2 attempts. Haze on window? wax deposits?  LOS  wider coils on igniter, windows clean, ignited and was all blue initially, then got soot spot,  decreased flow but soot persisted until 0.32 pot when soot disappeared then flame went out.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "as run matrix!K73",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K73. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Japan wax",
     "quality": "reported",
     "raw": "Japan Wax Candle wake",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "candle",
     "quality": "reported",
     "raw": "Japan Wax Candle wake",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.212449,
     "max": 0.212449,
     "quality": "reported",
     "raw": "=157/(582+157)",
     "column": "as run matrix!AA73",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA73. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =157/(582+157)."
    },
    "pressure_kpa": {
     "min": 98.525,
     "max": 98.525,
     "quality": "reported",
     "raw": "=(157+582)/760",
     "column": "as run matrix!AB73",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB73. NASA gives 0.97237 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =(157+582)/760."
    },
    "test_date": {
     "text": "2012-08-16",
     "quality": "reported",
     "raw": "8/16/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/71",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 83b",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 71,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 0,
     "max": 2,
     "quality": "reported",
     "raw": "2, 0",
     "column": "as run matrix!K74",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K74. NASA lists the speeds \"2, 0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Japan wax",
     "quality": "reported",
     "raw": "Japan Wax Candle wake",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "candle",
     "quality": "reported",
     "raw": "Japan Wax Candle wake",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Ignited very quickly on 2nd try",
     "column": "as run matrix!AD74",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD74. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "realigned crooked candle, cleaned windows, spread out coil loops.  Ignited very quickly on 2nd try, and was sooty immediately.  Decreased flow gradually, took 11 brackets.  Got very low flows.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.212449,
     "max": 0.212449,
     "quality": "reported",
     "raw": "=157/(582+157)",
     "column": "as run matrix!AA74",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA74. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =157/(582+157)."
    },
    "pressure_kpa": {
     "min": 98.525,
     "max": 98.525,
     "quality": "reported",
     "raw": "=(157+582)/760",
     "column": "as run matrix!AB74",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB74. NASA gives 0.97237 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =(157+582)/760."
    },
    "test_date": {
     "text": "2012-08-16",
     "quality": "reported",
     "raw": "8/16/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/72",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 83c",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 72,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Burned out all wax",
     "column": "as run matrix!AD75",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD75.",
     "evidence": "same candle, 3rd test,  trying for longer time at low flow. Burned out all wax, only 2 brackets.  Flame got smaller quickly flow rates due to lack of wax.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 2,
     "quality": "reported",
     "raw": "2,0",
     "column": "as run matrix!K75",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K75. NASA lists the speeds \"2,0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Japan wax",
     "quality": "reported",
     "raw": "Japan Wax Candle wake",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "candle",
     "quality": "reported",
     "raw": "Japan Wax Candle wake",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.212449,
     "max": 0.212449,
     "quality": "reported",
     "raw": "=157/(582+157)",
     "column": "as run matrix!AA75",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA75. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =157/(582+157)."
    },
    "pressure_kpa": {
     "min": 98.525,
     "max": 98.525,
     "quality": "reported",
     "raw": "=(157+582)/760",
     "column": "as run matrix!AB75",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB75. NASA gives 0.97237 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =(157+582)/760."
    },
    "test_date": {
     "text": "2012-08-16",
     "quality": "reported",
     "raw": "8/16/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/73",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 84a",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 73,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Consistenly goes out at pot 0.31",
     "column": "as run matrix!AD76",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD76.",
     "evidence": "P mode is auto-everything. Very long burn (~ 10 min), waited at every flow condition,   steady radiometer at 0.32 pot  ~ 2.2 (lowest for flame).  Consistenly goes out at pot 0.31",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 2,
     "quality": "reported",
     "raw": "2, 0",
     "column": "as run matrix!K76",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K76. NASA lists the speeds \"2, 0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Japan wax",
     "quality": "reported",
     "raw": "Japan Wax Candle wake",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "candle",
     "quality": "reported",
     "raw": "Japan Wax Candle wake",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.212449,
     "max": 0.212449,
     "quality": "reported",
     "raw": "=157/(582+157)",
     "column": "as run matrix!AA76",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA76. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =157/(582+157)."
    },
    "pressure_kpa": {
     "min": 98.525,
     "max": 98.525,
     "quality": "reported",
     "raw": "=(157+582)/760",
     "column": "as run matrix!AB76",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB76. NASA gives 0.97237 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =(157+582)/760."
    },
    "test_date": {
     "text": "2012-08-16",
     "quality": "reported",
     "raw": "8/16/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/74",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 84b",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 74,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 0,
     "max": 2,
     "quality": "reported",
     "raw": "2, 0",
     "column": "as run matrix!K77",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K77. NASA lists the speeds \"2, 0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Japan wax",
     "quality": "reported",
     "raw": "Japan Wax Candle wake",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "candle",
     "quality": "reported",
     "raw": "Japan Wax Candle wake",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.212449,
     "max": 0.212449,
     "quality": "reported",
     "raw": "=157/(582+157)",
     "column": "as run matrix!AA77",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA77. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =157/(582+157)."
    },
    "pressure_kpa": {
     "min": 98.525,
     "max": 98.525,
     "quality": "reported",
     "raw": "=(157+582)/760",
     "column": "as run matrix!AB77",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB77. NASA gives 0.97237 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =(157+582)/760."
    },
    "test_date": {
     "text": "2012-08-16",
     "quality": "reported",
     "raw": "8/16/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/75",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 86a",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 75,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "Got hot then stepped to 0 flow, went out",
     "column": "as run matrix!AD78",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD78. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "Last one with over the shoulder view on this session.    Got hot then stepped to 0 flow, went out.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 2,
     "quality": "reported",
     "raw": "2, 0",
     "column": "as run matrix!K78",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K78. NASA lists the speeds \"2, 0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Japan wax",
     "quality": "reported",
     "raw": "Japan Wax Candle wake",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "candle",
     "quality": "reported",
     "raw": "Japan Wax Candle wake",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.212449,
     "max": 0.212449,
     "quality": "reported",
     "raw": "=157/(582+157)",
     "column": "as run matrix!AA78",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA78. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =157/(582+157)."
    },
    "pressure_kpa": {
     "min": 98.525,
     "max": 98.525,
     "quality": "reported",
     "raw": "=(157+582)/760",
     "column": "as run matrix!AB78",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB78. NASA gives 0.97237 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =(157+582)/760."
    },
    "test_date": {
     "text": "2012-08-16",
     "quality": "reported",
     "raw": "8/16/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/76",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 86b",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 76,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "went out when fan off (38)",
     "column": "as run matrix!AD79",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD79. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "Turned on N2 at each flow setting starting at 0.35, not at 0.31.   At 0.31, flame persisted for a long time, went out when fan off (38).  All blue and dim.   2 frames shy of 13 brackets/",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 2,
     "quality": "reported",
     "raw": "2, 0",
     "column": "as run matrix!K79",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K79. NASA lists the speeds \"2, 0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Japan wax",
     "quality": "reported",
     "raw": "Japan Wax Candle wake",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "candle",
     "quality": "reported",
     "raw": "Japan Wax Candle wake",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.212449,
     "max": 0.212449,
     "quality": "reported",
     "raw": "=157/(582+157)",
     "column": "as run matrix!AA79",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA79. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =157/(582+157)."
    },
    "pressure_kpa": {
     "min": 98.525,
     "max": 98.525,
     "quality": "reported",
     "raw": "=(157+582)/760",
     "column": "as run matrix!AB79",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB79. NASA gives 0.97237 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =(157+582)/760."
    },
    "test_date": {
     "text": "2012-08-16",
     "quality": "reported",
     "raw": "8/16/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/77",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 86c",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 77,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "ran out of fuel too quickly",
     "column": "as run matrix!AD80",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD80.",
     "evidence": "higher flow test, but ran out of fuel too quickly.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 1,
     "quality": "reported",
     "raw": "1-0",
     "column": "as run matrix!K80",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K80. NASA lists the speeds \"1-0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Japan wax",
     "quality": "reported",
     "raw": "Japan Wax Candle wake",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "candle",
     "quality": "reported",
     "raw": "Japan Wax Candle wake",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.212449,
     "max": 0.212449,
     "quality": "reported",
     "raw": "=157/(582+157)",
     "column": "as run matrix!AA80",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA80. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =157/(582+157)."
    },
    "pressure_kpa": {
     "min": 98.525,
     "max": 98.525,
     "quality": "reported",
     "raw": "=(157+582)/760",
     "column": "as run matrix!AB80",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB80. NASA gives 0.97237 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =(157+582)/760."
    },
    "test_date": {
     "text": "2012-08-16",
     "quality": "reported",
     "raw": "8/16/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/78",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 70",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 78,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 7,
     "max": 9,
     "quality": "reported",
     "raw": "9, 7",
     "column": "as run matrix!K81",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K81. NASA lists the speeds \"9, 7\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA slab",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "PMMA slab",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "ignited well",
     "column": "as run matrix!AD81",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD81. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "ignited well and had initial sooty flame wrapped around leading edge of sample.  Reduced flow to 7 cm/s and flame turned all blue -Emmons shape.  Reached a steady size and spread downstream very slowly, all blue flame.  Top stills look like about 1 cm long flame with curved base and slightly curved tail, mostly oval.   All blue with intermittent yellow streaks.   Very stable.  Spread maybe 1 cm?",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.219339,
     "max": 0.219339,
     "quality": "reported",
     "raw": "=162.14/739.22",
     "column": "as run matrix!AA81",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA81. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =162.14/739.22."
    },
    "pressure_kpa": {
     "min": 98.555,
     "max": 98.555,
     "quality": "reported",
     "raw": "=739.22/760",
     "column": "as run matrix!AB81",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB81. NASA gives 0.97266 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =739.22/760."
    },
    "test_date": {
     "text": "2012-08-21",
     "quality": "reported",
     "raw": "8/21/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/79",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 71",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 79,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "as run matrix!K82",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K82. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA slab",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "PMMA slab",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Ignited and got immediate dim blue flame",
     "column": "as run matrix!AD82",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD82. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "igniter didn't work, must have burned out.  Replaced with long igniter.  Ignited and got immediate dim blue flame.  Let it burn for 8 minutes, got 294 images all blue lopsided oval, longer than previous run.  Spread maybe 1 cm",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.219339,
     "max": 0.219339,
     "quality": "reported",
     "raw": "=162.14/739.22",
     "column": "as run matrix!AA82",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA82. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =162.14/739.22."
    },
    "pressure_kpa": {
     "min": 98.555,
     "max": 98.555,
     "quality": "reported",
     "raw": "=739.22/760",
     "column": "as run matrix!AB82",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB82. NASA gives 0.97266 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =739.22/760."
    },
    "test_date": {
     "text": "2012-08-21",
     "quality": "reported",
     "raw": "8/21/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/80",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 74",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 80,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "extinguished by itself",
     "column": "as run matrix!AD83",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD83.",
     "evidence": "first wax slab test.   Ignited nicely.  Very sooty flame wrapped around leading edge.  Turned flow down to 3 cm/s.  Flame sooty for a while, then as it burned out leading edge it got dimmer, shorter and eventully  all blue.  Shrank slowly and extinguished by itself.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 3,
     "max": 5,
     "quality": "reported",
     "raw": "5, 3",
     "column": "as run matrix!K83",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K83. NASA lists the speeds \"5, 3\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Paraffin wax",
     "quality": "reported",
     "raw": "paraffin wax slab",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "paraffin wax slab",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.219339,
     "max": 0.219339,
     "quality": "reported",
     "raw": "=162.14/739.22",
     "column": "as run matrix!AA83",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA83. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =162.14/739.22."
    },
    "pressure_kpa": {
     "min": 98.555,
     "max": 98.555,
     "quality": "reported",
     "raw": "=739.22/760",
     "column": "as run matrix!AB83",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB83. NASA gives 0.97266 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =739.22/760."
    },
    "test_date": {
     "text": "2012-08-21",
     "quality": "reported",
     "raw": "8/21/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/81",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 75",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 81,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "6",
     "column": "as run matrix!K84",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K84. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Paraffin wax",
     "quality": "reported",
     "raw": "parrafin wax slab",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "parrafin wax slab",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "Flame went out when igniter was retracted",
     "column": "as run matrix!AD84",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD84. NASA's observation says the sample did not ignite or keep a flame.",
     "evidence": "tried igniting at 6 cm/s.  Flame went out when igniter was retracted, with a puff of smoke.  Tried a 2nd time, same effect.  3rd try igniter  broke/failed.  Sample showed blackened spot around mid-sample in over the shoulder view at 15:15 GMT.  Stowed igniters in bag.  Last run until January when we get new igniters up.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.219339,
     "max": 0.219339,
     "quality": "reported",
     "raw": "=162.14/739.22",
     "column": "as run matrix!AA84",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA84. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%. NASA's sheet computes it from the oxygen partial pressure and the total pressure, in mmHg: =162.14/739.22."
    },
    "pressure_kpa": {
     "min": 98.555,
     "max": 98.555,
     "quality": "reported",
     "raw": "=739.22/760",
     "column": "as run matrix!AB84",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB84. NASA gives 0.97266 atm; multiplied by 101.325. NASA's sheet computes the atm value from the pressure in mmHg: =739.22/760."
    },
    "test_date": {
     "text": "2012-08-21",
     "quality": "reported",
     "raw": "8/21/2012",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/82",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 98",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 82,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 12,
     "max": 12,
     "quality": "reported",
     "raw": "12",
     "column": "as run matrix!K89",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K89. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "nice ignition, blue leading edge",
     "column": "as run matrix!AD89",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD89. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "1st vititation test with CSA-CP.  N2 on at 495 from 12:34:15 with fan 122 =31 cm/s,    N2 off at msg 14:28:20..  Calc 17.07% O2 ,   nice ignition, blue leading edge, some soot later in tail.    All still frames black because lens cap still on.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.1707,
     "max": 0.1707,
     "quality": "reported",
     "raw": "0.1707",
     "column": "as run matrix!AA89",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA89. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 98.285,
     "max": 98.285,
     "quality": "reported",
     "raw": "0.97",
     "column": "as run matrix!AB89",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB89. NASA gives 0.97 atm; multiplied by 101.325."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "PMMA 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-04-05",
     "quality": "reported",
     "raw": "4/5/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/83",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 99",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 83,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinguished at very low flow",
     "column": "as run matrix!AD90",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD90.",
     "evidence": "same atmosphere.  Re-igntion after removing lens cap.   Good burn,  sooty tail.    Extinguished at very low flow.  Pictures look  sooty,  166 images.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 12,
     "max": 12,
     "quality": "reported",
     "raw": "12",
     "column": "as run matrix!K90",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K90. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.1707,
     "max": 0.1707,
     "quality": "reported",
     "raw": "0.1707",
     "column": "as run matrix!AA90",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA90. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 98.285,
     "max": 98.285,
     "quality": "reported",
     "raw": "0.97",
     "column": "as run matrix!AB90",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB90. NASA gives 0.97 atm; multiplied by 101.325."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "PMMA 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-04-05",
     "quality": "reported",
     "raw": "4/5/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/84",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 114",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 84,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 2,
     "max": 7.5,
     "quality": "reported",
     "raw": "7.5,  2",
     "column": "as run matrix!K91",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K91. NASA lists the speeds \"7.5,  2\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.211,
     "max": 0.211,
     "quality": "reported",
     "raw": "0.211",
     "column": "as run matrix!AA91",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA91. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.501,
     "max": 99.501,
     "quality": "reported",
     "raw": "0.982",
     "column": "as run matrix!AB91",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB91. NASA gives 0.982 atm; multiplied by 101.325."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "PMMA 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-04-09",
     "quality": "reported",
     "raw": "4/9/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/85",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 115",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 85,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 0,
     "max": 7.5,
     "quality": "reported",
     "raw": "7.5,  0",
     "column": "as run matrix!K92",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K92. NASA lists the speeds \"7.5,  0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "pmma 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "dim flame propagates upstream",
     "column": "as run matrix!AD92",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD92. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "wake ign,    dim flame propagates upstream, some soot late in burn,  slightly non-symmetric with top spreading faster than bottom",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.211,
     "max": 0.211,
     "quality": "reported",
     "raw": "0.211",
     "column": "as run matrix!AA92",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA92. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.501,
     "max": 99.501,
     "quality": "reported",
     "raw": "0.982",
     "column": "as run matrix!AB92",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB92. NASA gives 0.982 atm; multiplied by 101.325."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "pmma 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-04-09",
     "quality": "reported",
     "raw": "4/9/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/86",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 116",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 86,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "before we put it out (air off)",
     "column": "as run matrix!AD93",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD93. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "wake ign,     fan pot to 0.5 (42), started getting soot before we put it out (air off) 125 frames this test",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 8,
     "quality": "reported",
     "raw": "8, 0",
     "column": "as run matrix!K93",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K93. NASA lists the speeds \"8, 0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "pmma 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.211,
     "max": 0.211,
     "quality": "reported",
     "raw": "0.211",
     "column": "as run matrix!AA93",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA93. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.501,
     "max": 99.501,
     "quality": "reported",
     "raw": "0.982",
     "column": "as run matrix!AB93",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB93. NASA gives 0.982 atm; multiplied by 101.325."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "pmma 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-04-09",
     "quality": "reported",
     "raw": "4/9/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/87",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 117",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 87,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Went out at 0.32 pot",
     "column": "as run matrix!AD94",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD94.",
     "evidence": "wake ign   too far away, needed to go in and readjust igniter,  ignition started again at 10:50 gmt. Flame spread all the way upstream.  Went out at 0.32 pot,  got spherical and flashed out.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "pmma 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.211,
     "max": 0.211,
     "quality": "reported",
     "raw": "0.211",
     "column": "as run matrix!AA94",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA94. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.501,
     "max": 99.501,
     "quality": "reported",
     "raw": "0.982",
     "column": "as run matrix!AB94",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB94. NASA gives 0.982 atm; multiplied by 101.325."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "pmma 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-04-09",
     "quality": "reported",
     "raw": "4/9/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/88",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 117a",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 88,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 0,
     "max": 20,
     "quality": "reported",
     "raw": "8, 20, 8, 1, 0",
     "column": "as run matrix!K95",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K95. NASA lists the speeds \"8, 20, 8, 1, 0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "pmma 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "got a very sooty tail",
     "column": "as run matrix!AD95",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD95. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "increased flow to 20 cm/s, got a very sooty tail.  After turning flow back to 8 cm/s, soot tail remained.   Even down to 1 cm/s flame had sooty tail.   Sphere down to about 1 cm, smooth after this last burn.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.211,
     "max": 0.211,
     "quality": "reported",
     "raw": "0.211",
     "column": "as run matrix!AA95",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA95. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.501,
     "max": 99.501,
     "quality": "reported",
     "raw": "0.982",
     "column": "as run matrix!AB95",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB95. NASA gives 0.982 atm; multiplied by 101.325."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "pmma 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-04-09",
     "quality": "reported",
     "raw": "4/9/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/89",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 100",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 89,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Flame went out when fan set to 39",
     "column": "as run matrix!AD96",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD96.",
     "evidence": "sample is actually down to about 1 cm,  GN2 pot actually set to 8, reading 397,  flow start 12:41    flow stop 14:44:30,   final O2 is 17.3%.   Had Chris anneal the igniter before ignition.  We lost video during ignition for a minute or two.    Chris didn't press shutter until Paul told him we lost video.   So images start late.     Will need to schedule playback of this test.    Flame went out when fan set to 39.  Playback attempted 15:47 but it was streaky.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 8,
     "quality": "reported",
     "raw": "8, 5, 0",
     "column": "as run matrix!K96",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K96. NASA lists the speeds \"8, 5, 0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "pmma 2 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21111,
     "max": 0.21111,
     "quality": "reported",
     "raw": "0.21111",
     "column": "as run matrix!AA96",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA96. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.299,
     "max": 99.299,
     "quality": "reported",
     "raw": "0.98",
     "column": "as run matrix!AB96",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB96. NASA gives 0.98 atm; multiplied by 101.325."
    },
    "sample_width_cm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "pmma 2 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-04-12",
     "quality": "reported",
     "raw": "4/12/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/90",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 85",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 90,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 3,
     "max": 3,
     "quality": "reported",
     "raw": "3",
     "column": "as run matrix!K97",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K97. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Paraffin wax",
     "quality": "reported",
     "raw": "candle paraffin wake",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "candle",
     "quality": "reported",
     "raw": "candle paraffin wake",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "flame was steady all blue",
     "column": "as run matrix!AD97",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD97. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "new candle,   started GN2 at 15:26 00 gmt 15:31:10 msg  stopped gmt 17:20:20, O2 16.8%.   Bracketing images 7 s hold.  Filled up card with bracket images.   Chris noted the flame was not moving at all, unlike the 'contamination' of the acrylic shape.   At 42 (pot 0.5) was all blue initially, but had soot after a bit.   At 41 (pot 0.4), flame was steady all blue.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.21111,
     "max": 0.21111,
     "quality": "reported",
     "raw": "0.21111",
     "column": "as run matrix!AA97",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA97. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.299,
     "max": 99.299,
     "quality": "reported",
     "raw": "0.98",
     "column": "as run matrix!AB97",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB97. NASA gives 0.98 atm; multiplied by 101.325."
    },
    "test_date": {
     "text": "2013-04-12",
     "quality": "reported",
     "raw": "4/12/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/91",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 93",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 91,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "went out on its own",
     "column": "as run matrix!AD98",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD98.",
     "evidence": "changed out card for unknown card, 1 handed with glove on!  Hopefully it wasn't #6!  We still don't have that data.     Got sooty pretty quickly,   turned up accidentally to 43 pot, tnen down to 41.   went out on its own at 18:04:30 ish.  He described it as being the side of a pencil eraser, with the back end open.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "fuel": {
     "text": "Paraffin wax",
     "quality": "reported",
     "raw": "candle paraffin wake",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "candle",
     "quality": "reported",
     "raw": "candle paraffin wake",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.2113,
     "max": 0.2113,
     "quality": "reported",
     "raw": "0.2113",
     "column": "as run matrix!AA98",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA98. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.299,
     "max": 99.299,
     "quality": "reported",
     "raw": "0.98",
     "column": "as run matrix!AB98",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB98. NASA gives 0.98 atm; multiplied by 101.325."
    },
    "test_date": {
     "text": "2013-04-12",
     "quality": "reported",
     "raw": "4/12/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/92",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 26",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 92,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "pmma 1 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "At 0.33 pot flame got all blue just around stagnation region",
     "column": "as run matrix!AD99",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD99. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "new sphere,  issue with numbers,  sample 20 is a stump, completely gone.  LOS for setup/GN2 start   Gn2 on 10:44 pff 12:26 ,  vitiation to 17.3 % o2.  Lots of vapor jetting at low flow. At 0.33 pot flame got all blue just around stagnation region.   Last pic still had a flame~3:15 burn",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.173,
     "max": 0.173,
     "quality": "reported",
     "raw": "0.173",
     "column": "as run matrix!AA99",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA99. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 100.312,
     "max": 100.312,
     "quality": "reported",
     "raw": "0.99",
     "column": "as run matrix!AB99",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB99. NASA gives 0.99 atm; multiplied by 101.325."
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "pmma 1 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-04-16",
     "quality": "reported",
     "raw": "4/16/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/93",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 27",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 93,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "Out when fan off",
     "column": "as run matrix!AD100",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD100. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "Gn2 start, max, at msg 13:07:40,  off 14:54:55, O2 17.1% O2.  Igniter broke, he replaced it 1 handed!  Igniton at 62 then turned down to 41.5 then 41 (0.35 pot),  stable at 0.35 pot.  Out when fan off.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "pmma 1 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.171,
     "max": 0.171,
     "quality": "reported",
     "raw": "0.171",
     "column": "as run matrix!AA100",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA100. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 100.312,
     "max": 100.312,
     "quality": "reported",
     "raw": "0.99",
     "column": "as run matrix!AB100",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB100. NASA gives 0.99 atm; multiplied by 101.325."
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "pmma 1 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-04-16",
     "quality": "reported",
     "raw": "4/16/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/94",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 28",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 94,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Burned out sample",
     "column": "as run matrix!AD101",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD101.",
     "evidence": "Igniter too far away readjusted 1 handed.  Over the shoulder view, out of focus a bit.  Burned out sample.  Held up sample to camera view, just crunchy bits on the end.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "pmma 1 cm",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.171,
     "max": 0.171,
     "quality": "reported",
     "raw": "0.171",
     "column": "as run matrix!AA101",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA101. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 100.312,
     "max": 100.312,
     "quality": "reported",
     "raw": "0.99",
     "column": "as run matrix!AB101",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB101. NASA gives 0.99 atm; multiplied by 101.325."
    },
    "sample_width_cm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "pmma 1 cm",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-04-16",
     "quality": "reported",
     "raw": "4/16/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/95",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 87",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 95,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Candle  out at flow change",
     "column": "as run matrix!AD102",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD102.",
     "evidence": "LONG candle burn at very low flow rates.  Sooty at 2 cm/s and then at 1 cm/s.   All blue at fan41.  Candle  out at flow change.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 2,
     "quality": "reported",
     "raw": "1,2,1,0",
     "column": "as run matrix!K102",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K102. NASA lists the speeds \"1,2,1,0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Japan wax",
     "quality": "reported",
     "raw": "candle Japan wax",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "candle",
     "quality": "reported",
     "raw": "candle Japan wax",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.159,
     "max": 0.159,
     "quality": "reported",
     "raw": "0.159",
     "column": "as run matrix!AA102",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA102. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 98.285,
     "max": 98.285,
     "quality": "reported",
     "raw": "0.97",
     "column": "as run matrix!AB102",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB102. NASA gives 0.97 atm; multiplied by 101.325."
    },
    "test_date": {
     "text": "2013-04-23",
     "quality": "reported",
     "raw": "4/23/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/96",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 103",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 96,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinguished on last flow change pot 0.35-0.32",
     "column": "as run matrix!AD103",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD103.",
     "evidence": "Ign took 3 min.  Only spread top half of video initially.  Wrapped some later.  All blue.   Extinguished on last flow change pot 0.35-0.32, shrank to leading edge",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "as run matrix!K103",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K103. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.1753,
     "max": 0.1753,
     "quality": "reported",
     "raw": "0.1753",
     "column": "as run matrix!AA103",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA103. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 98.285,
     "max": 98.285,
     "quality": "reported",
     "raw": "0.97",
     "column": "as run matrix!AB103",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB103. NASA gives 0.97 atm; multiplied by 101.325."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-04-23",
     "quality": "reported",
     "raw": "4/23/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/97",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 104",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 97,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "Extinguished when flow off",
     "column": "as run matrix!AD104",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD104. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "Ign took 2 min, flame on top half.  Used GN2 to try and blow out at low flow.  No joy even at max GN2.  Extinguished when flow off.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.1753,
     "max": 0.1753,
     "quality": "reported",
     "raw": "0.1753",
     "column": "as run matrix!AA104",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA104. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 98.285,
     "max": 98.285,
     "quality": "reported",
     "raw": "0.97",
     "column": "as run matrix!AB104",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB104. NASA gives 0.97 atm; multiplied by 101.325."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-04-23",
     "quality": "reported",
     "raw": "4/23/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/98",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 105",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 98,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "out at 18:40 at finite extremely low flow",
     "column": "as run matrix!AD105",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD105.",
     "evidence": "Ign in 1 min.  Symmetric growth.  Gets sooty, even when flow reduced to 41.  Gets all blue at 18:38, out at 18:40 at finite extremely low flow.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.205,
     "max": 0.205,
     "quality": "reported",
     "raw": "0.205",
     "column": "as run matrix!AA105",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA105. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 98.285,
     "max": 98.285,
     "quality": "reported",
     "raw": "0.97",
     "column": "as run matrix!AB105",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB105. NASA gives 0.97 atm; multiplied by 101.325."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-04-23",
     "quality": "reported",
     "raw": "4/23/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/99",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 38",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 99,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "brief flame at 62 but also 'flamed out'",
     "column": "as run matrix!AD106",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD106.",
     "evidence": "repeated ignition attempts, no luck at 52,  brief flame at 62 but also 'flamed out'.   Chris says 1/3 of sphere is gone from wake region.  Need to readjust igniter wire.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 6,
     "max": 8,
     "quality": "reported",
     "raw": "6, 8",
     "column": "as run matrix!K106",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K106. NASA lists the speeds \"6, 8\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1 cm sphere wake",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "1 cm sphere wake",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.1667,
     "max": 0.1667,
     "quality": "reported",
     "raw": "0.1667",
     "column": "as run matrix!AA106",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA106. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 98.893,
     "max": 98.893,
     "quality": "reported",
     "raw": "0.976",
     "column": "as run matrix!AB106",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB106. NASA gives 0.976 atm; multiplied by 101.325."
    },
    "size_mm": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "1 cm sphere wake",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-04-26",
     "quality": "reported",
     "raw": "4/26/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/100",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 39",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 100,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "flame self-extinguished",
     "column": "as run matrix!AD107",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD107.",
     "evidence": "took about 3 min to ignite, repeated attempts.  Got blue flame that was 1/2 way or mor around top.   Turned fan down in increments:12:10:20 0.6 (43); 11:15 0.5 (42); 11:50 0.35 (41) and 12:35 0.32 (41)   flame self-extinguished.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1 cm wake sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "1 cm wake sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.1667,
     "max": 0.1667,
     "quality": "reported",
     "raw": "0.1667",
     "column": "as run matrix!AA107",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA107. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 98.893,
     "max": 98.893,
     "quality": "reported",
     "raw": "0.976",
     "column": "as run matrix!AB107",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB107. NASA gives 0.976 atm; multiplied by 101.325."
    },
    "size_mm": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "1 cm wake sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-04-26",
     "quality": "reported",
     "raw": "4/26/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/101",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 40",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 101,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "burned out fuel",
     "column": "as run matrix!AD108",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD108.",
     "evidence": "flame lit on 2nd try,  quickly turned sooty, spread around small remaining sphere.  All blue at lower flows, burned out fuel.  Very nice over the shoulder zoomed in view of flame.  Better than expt video!",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "flow_speed_cm_s": {
     "min": 0,
     "max": 8,
     "quality": "reported",
     "raw": "8, 2, 1, 0",
     "column": "as run matrix!K108",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K108. NASA lists the speeds \"8, 2, 1, 0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "1 cm wake sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "1 cm wake sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.178,
     "max": 0.178,
     "quality": "reported",
     "raw": "0.178",
     "column": "as run matrix!AA108",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA108. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 98.893,
     "max": 98.893,
     "quality": "reported",
     "raw": "0.976",
     "column": "as run matrix!AB108",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB108. NASA gives 0.976 atm; multiplied by 101.325."
    },
    "size_mm": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "1 cm wake sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-04-26",
     "quality": "reported",
     "raw": "4/26/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/102",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 72",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 102,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "pmma slab opposed",
     "column": "as run matrix!F109",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!F109. The word is in the material cell."
    },
    "flow_speed_cm_s": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "as run matrix!K109",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K109. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "pmma slab opposed",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "pmma slab opposed",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "no luck keeping the flame sustained",
     "column": "as run matrix!AD109",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD109. NASA's observation says the sample did not ignite or keep a flame.",
     "evidence": "repeated ignition attempts, no luck keeping the flame sustained.  After igniter retract, the blue flame leading edge shrinks back, the tail shrinks, the flame becomes parallel to the fuel surface, and then winks out.    Apparently not flammable in opposed flow for the same concurrent flow.  Heat losses are different though, due to the metal holder around the back end of sample but not on front edge.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "as run matrix!AA109",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA109. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 98.893,
     "max": 98.893,
     "quality": "reported",
     "raw": "0.976",
     "column": "as run matrix!AB109",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB109. NASA gives 0.976 atm; multiplied by 101.325."
    },
    "test_date": {
     "text": "2013-04-26",
     "quality": "reported",
     "raw": "4/26/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/103",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 73",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 103,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "pmma slab, oppsed",
     "column": "as run matrix!F110",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!F110. NASA wrote \"oppsed\" for \"opposed\". The word is in the material cell."
    },
    "flow_speed_cm_s": {
     "min": 15,
     "max": 15,
     "quality": "reported",
     "raw": "15",
     "column": "as run matrix!K110",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K110. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "pmma slab oppsed",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "pmma slab oppsed",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "Got a flame briefly, but did not sustain for any spread",
     "column": "as run matrix!AD110",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD110. NASA's observation says the sample did not ignite or keep a flame.",
     "evidence": "moved igniter upstream of 'crater' we created on last test.   Got a flame briefly, but did not sustain for any spread, shrank and winked out after maybe 15 s or so. Broke the igniter trying to re-ignite.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "as run matrix!AA110",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA110. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 98.893,
     "max": 98.893,
     "quality": "reported",
     "raw": "0.976",
     "column": "as run matrix!AB110",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB110. NASA gives 0.976 atm; multiplied by 101.325."
    },
    "test_date": {
     "text": "2013-04-26",
     "quality": "reported",
     "raw": "4/26/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/104",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 118",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 104,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Went out at finite flow",
     "column": "as run matrix!AD111",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD111.",
     "evidence": "broke 2 igniters on this trying to get it to ignite. 3rd one was suspect, and didn't work.  2nd vitiation, got it ignited, burned just on forward stagnation region, minimal spread.  Went out at finite flow.  Post burn shape was crater and protrusion on lower half.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "2 cm pmma sphere",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm pmma sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.1734,
     "max": 0.1734,
     "quality": "reported",
     "raw": "0.1734",
     "column": "as run matrix!AA111",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA111. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.602,
     "max": 99.602,
     "quality": "reported",
     "raw": "0.983",
     "column": "as run matrix!AB111",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB111. NASA gives 0.983 atm; multiplied by 101.325."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm pmma sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-04-29",
     "quality": "reported",
     "raw": "4/29/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/105",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 119",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 105,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "flow terminated",
     "quality": "reported",
     "raw": "we shut off flow to put flame out",
     "column": "as run matrix!AD112",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD112. NASA's observation says the crew turned the air flow off and the flame went out.",
     "evidence": "started igniting the protrusion and then went LOS for a minute.  Came back and sample bump is gone,  pot down to flow of 2 cm/s, radiometer increased so still growing flame.  Pot to 0.4 and flame still growing fan 41.5,  pot 0.33 radiometer drops to 0.7,  fan 41,  down to 0.3 but camera ran out and we shut off flow to put flame out.  Sample shape much more spherical.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "2 cm pmma sphere",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm pmma sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.1734,
     "max": 0.1734,
     "quality": "reported",
     "raw": "0.1734",
     "column": "as run matrix!AA112",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA112. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.602,
     "max": 99.602,
     "quality": "reported",
     "raw": "0.983",
     "column": "as run matrix!AB112",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB112. NASA gives 0.983 atm; multiplied by 101.325."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm pmma sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-04-29",
     "quality": "reported",
     "raw": "4/29/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/106",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 89",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 106,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "out 14:22:50",
     "column": "as run matrix!AD113",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD113. NASA lists falling pot settings with times and then \"out\". Read as: it went out as the flow was lowered.",
     "evidence": "ignited 'concurrent' or stagnation.17:45 - 0.5; 18:30-0.4; 19:20-0.35; 20:20-0.33; 21:30-0.32;  out 14:22:50",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "fuel": {
     "text": "Paraffin wax",
     "quality": "reported",
     "raw": "parrafin wax candle",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "candle",
     "quality": "reported",
     "raw": "parrafin wax candle",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.1605,
     "max": 0.1605,
     "quality": "reported",
     "raw": "0.1605",
     "column": "as run matrix!AA113",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA113. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.501,
     "max": 99.501,
     "quality": "reported",
     "raw": "0.982",
     "column": "as run matrix!AB113",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB113. NASA gives 0.982 atm; multiplied by 101.325."
    },
    "test_date": {
     "text": "2013-05-02",
     "quality": "reported",
     "raw": "5/2/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/107",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 95",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 107,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 5,
     "max": 10,
     "quality": "reported",
     "raw": "5, 10",
     "column": "as run matrix!K114",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K114. NASA lists the speeds \"5, 10\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Paraffin wax",
     "quality": "reported",
     "raw": "paraffin wax candle",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "candle",
     "quality": "reported",
     "raw": "paraffin wax candle",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "no ignition, despite prolonged attempted ignition",
     "column": "as run matrix!AD114",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD114. NASA adds: \"Candle out of wax?\".",
     "evidence": "no ignition, despite prolonged attempted ignition.  No pictures were taken. Candle out of wax?",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.1605,
     "max": 0.1605,
     "quality": "reported",
     "raw": "0.1605",
     "column": "as run matrix!AA114",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA114. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.501,
     "max": 99.501,
     "quality": "reported",
     "raw": "0.982",
     "column": "as run matrix!AB114",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB114. NASA gives 0.982 atm; multiplied by 101.325."
    },
    "test_date": {
     "text": "2013-05-02",
     "quality": "reported",
     "raw": "5/2/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/108",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 92",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 108,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "before the flame goes out (out of wax)",
     "column": "as run matrix!AD115",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD115. NASA says the flame went out \"(out of wax)\". Read as: the fuel ran out.",
     "evidence": "nice blue flame with inner soot until low flows.  At extinction, the  stag zone opened up before the flame goes out (out of wax).",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "fuel": {
     "text": "Japan wax",
     "quality": "reported",
     "raw": "candle Japan wax",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "candle",
     "quality": "reported",
     "raw": "candle Japan wax",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.163,
     "max": 0.163,
     "quality": "reported",
     "raw": "0.163",
     "column": "as run matrix!AA115",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA115. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.501,
     "max": 99.501,
     "quality": "reported",
     "raw": "0.982",
     "column": "as run matrix!AB115",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB115. NASA gives 0.982 atm; multiplied by 101.325."
    },
    "test_date": {
     "text": "2013-05-02",
     "quality": "reported",
     "raw": "5/2/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/109",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 78",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 109,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "self-extinguished",
     "quality": "reported",
     "raw": "Went out on its own at a flow of 0.4 after 75 seconds",
     "column": "as run matrix!AD116",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD116.",
     "evidence": "new sample. Blue flame wrapped around leading edge,  didn't propagate at all.  Went out on its own at a flow of 0.4 after 75 seconds",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "fuel": {
     "text": "Paraffin wax",
     "quality": "reported",
     "raw": "paraffin wax slab",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "paraffin wax slab",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.163,
     "max": 0.163,
     "quality": "reported",
     "raw": "0.163",
     "column": "as run matrix!AA116",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA116. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.501,
     "max": 99.501,
     "quality": "reported",
     "raw": "0.982",
     "column": "as run matrix!AB116",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB116. NASA gives 0.982 atm; multiplied by 101.325."
    },
    "test_date": {
     "text": "2013-05-02",
     "quality": "reported",
     "raw": "5/2/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/110",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 50",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 110,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "as run matrix!K117",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K117. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "2 cm pmma sphere",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm pmma sphere",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Short burn about 2 minutes",
     "column": "as run matrix!AD117",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD117. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "new sphere,  took 4 min to ignite with repeated tries and brief flames .  All blue to start, grew to wrap past 90 degrees .   Short burn about 2 minutes.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.172,
     "max": 0.172,
     "quality": "reported",
     "raw": "0.172",
     "column": "as run matrix!AA117",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA117. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 98.995,
     "max": 98.995,
     "quality": "reported",
     "raw": "0.977",
     "column": "as run matrix!AB117",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB117. NASA gives 0.977 atm; multiplied by 101.325."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm pmma sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2103-05-15",
     "quality": "reported",
     "raw": "5/15/2103",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/111",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 51",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 111,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "as run matrix!K118",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K118. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "takes 4 min to ignite sphere at this O2",
     "column": "as run matrix!AD118",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD118. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "broke igniter just before it was going to stay lit.  New igniter trying again.  Repeat of test 50.  takes 4 min to ignite sphere at this O2.  blue flame.  Post-burn sample had large amounts of soot on it that had to be wiped off.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.172,
     "max": 0.172,
     "quality": "reported",
     "raw": "0.172",
     "column": "as run matrix!AA118",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA118. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 98.995,
     "max": 98.995,
     "quality": "reported",
     "raw": "0.977",
     "column": "as run matrix!AB118",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB118. NASA gives 0.977 atm; multiplied by 101.325."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-05-15",
     "quality": "reported",
     "raw": "5/15/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/112",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 52",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 112,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 0,
     "max": 10,
     "quality": "reported",
     "raw": "10, 5,2, 0",
     "column": "as run matrix!K119",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K119. NASA lists the speeds \"10, 5,2, 0\" in turn; the value runs from the lowest to the highest. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "All blue with intermittent soot balls streaking back",
     "column": "as run matrix!AD119",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD119. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "broke igniter.    All blue with intermittent soot balls streaking back.  Might be able to get flow measurements from those.  Lab view zoomed in on flame also.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.171,
     "max": 0.171,
     "quality": "reported",
     "raw": "0.171",
     "column": "as run matrix!AA119",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA119. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 98.995,
     "max": 98.995,
     "quality": "reported",
     "raw": "0.977",
     "column": "as run matrix!AB119",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB119. NASA gives 0.977 atm; multiplied by 101.325."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-05-15",
     "quality": "reported",
     "raw": "5/15/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/113",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 53",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 113,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "as run matrix!K120",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K120. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.1713,
     "max": 0.1713,
     "quality": "reported",
     "raw": "0.1713",
     "column": "as run matrix!AA120",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA120. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 98.995,
     "max": 98.995,
     "quality": "reported",
     "raw": "0.977",
     "column": "as run matrix!AB120",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB120. NASA gives 0.977 atm; multiplied by 101.325."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-05-15",
     "quality": "reported",
     "raw": "5/15/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/114",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 106",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 114,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "3 min to ignite",
     "column": "as run matrix!AD121",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD121. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "new igniter, anneal it.  3 min to ignite,  turned flow to 7 cm/s, let it wrap around sphere, then reduced flow to < 1 cm/s.   All blue flame.  Nice video from the over the shoulder view.    Sphere is very flat on front,w ith blackened bubble layer extending past 90 degreees on the sphere.  Back ~40% of sphere still fairly pristine.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.1717,
     "max": 0.1717,
     "quality": "reported",
     "raw": "0.1717",
     "column": "as run matrix!AA121",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA121. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.299,
     "max": 99.299,
     "quality": "reported",
     "raw": "0.98",
     "column": "as run matrix!AB121",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB121. NASA gives 0.98 atm; multiplied by 101.325."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-05-17",
     "quality": "reported",
     "raw": "5/17/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/115",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 107",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 115,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Ignition in 1.5 min",
     "column": "as run matrix!AD122",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD122. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "nice over the shoulder view, very hard to see dim flame in expt video.  Ignition in 1.5 min.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.1717,
     "max": 0.1717,
     "quality": "reported",
     "raw": "0.1717",
     "column": "as run matrix!AA122",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA122. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.299,
     "max": 99.299,
     "quality": "reported",
     "raw": "0.98",
     "column": "as run matrix!AB122",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB122. NASA gives 0.98 atm; multiplied by 101.325."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-05-17",
     "quality": "reported",
     "raw": "5/17/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/116",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 108",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 116,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "went out when pot turned down to 0.29",
     "column": "as run matrix!AD123",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD123.",
     "evidence": "stills during ignition.flame ignited over lower part of sphere, wrapped around and then decreased flow to near limit flow, flame shrank forward and oscillated slightly at pot 0.35,  went out when pot turned down to 0.29.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.1724,
     "max": 0.1724,
     "quality": "reported",
     "raw": "0.1724",
     "column": "as run matrix!AA123",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA123. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.299,
     "max": 99.299,
     "quality": "reported",
     "raw": "0.98",
     "column": "as run matrix!AB123",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB123. NASA gives 0.98 atm; multiplied by 101.325."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-05-17",
     "quality": "reported",
     "raw": "5/17/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/117",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 109",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 117,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Flame went out at pot 0.27",
     "column": "as run matrix!AD124",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD124.",
     "evidence": "got dim flame with stills during ignition, then had Chris do incr and decr flow flame got very long soot tail at  around 10 cm/s and dim blue spherical flame at really low flows.  Flame went out at pot 0.27, with oscillations and a big flash at extinction.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "context",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material",
     "note": "The cell names the shape only. Other rows of this table identify rods, spheres, slabs and films as PMMA."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.1724,
     "max": 0.1724,
     "quality": "reported",
     "raw": "0.1724",
     "column": "as run matrix!AA124",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA124. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 99.299,
     "max": 99.299,
     "quality": "reported",
     "raw": "0.98",
     "column": "as run matrix!AB124",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB124. NASA gives 0.98 atm; multiplied by 101.325."
    },
    "size_mm": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "2 cm sphere",
     "column": "Fuel Sample Material"
    },
    "test_date": {
     "text": "2013-06-01",
     "quality": "reported",
     "raw": "6/1/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/118",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 79",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 118,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Sample ignited briefly - blue curving around leading edge, but went out",
     "column": "as run matrix!AD125",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD125.",
     "evidence": "igniter 20-11 wass reported broken when he was getting it ready.  Tested 20-132 and it was fine.  Sample ignited briefly - blue curving around leading edge, but went out.  Couldn't get it ignited again at leading edge.   Adjusted igniter dcownstream.  No luck.  No stills taken.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "fuel": {
     "text": "Wax",
     "quality": "reported",
     "raw": "flat wax slab",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "flat wax slab",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.174,
     "max": 0.174,
     "quality": "reported",
     "raw": "0.174",
     "column": "as run matrix!AA125",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA125. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 100.95,
     "max": 100.95,
     "quality": "reported",
     "raw": "0.9963",
     "column": "as run matrix!AB125",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB125. NASA gives 0.9963 atm; multiplied by 101.325."
    },
    "test_date": {
     "text": "2013-06-01",
     "quality": "reported",
     "raw": "6/1/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/119",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 80",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 119,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10,",
     "column": "as run matrix!K126",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K126. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Wax",
     "quality": "reported",
     "raw": "flat wax slab",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "flat wax slab",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No flame",
     "column": "as run matrix!AD126",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD126. NASA gives the reason: \"Not enough fuel in forward patch on sample.\".",
     "evidence": "tried igniting in air at 10 cm/s.  Not enough fuel in forward patch on sample.  No flame.  So readjusted igniter to downstream patch (~ 1/2 of sample).  Igniter 20-13 broken,  installing 20-12, uncoiled.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.2118,
     "max": 0.2118,
     "quality": "reported",
     "raw": "0.2118",
     "column": "as run matrix!AA126",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA126. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 100.95,
     "max": 100.95,
     "quality": "reported",
     "raw": "0.9963",
     "column": "as run matrix!AB126",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB126. NASA gives 0.9963 atm; multiplied by 101.325."
    },
    "test_date": {
     "text": "2013-06-01",
     "quality": "reported",
     "raw": "6/1/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/120",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 75",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 120,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "flow_speed_cm_s": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "10",
     "column": "as run matrix!K127",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!K127. NASA's BASS-II ReadMe defines the air display as \"flow speed measured in the duct in cm/s on the video display\"."
    },
    "fuel": {
     "text": "Wax",
     "quality": "reported",
     "raw": "flat wax slab",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "slab",
     "quality": "reported",
     "raw": "flat wax slab",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "no joy, just a puff of smoke each time",
     "column": "as run matrix!AD127",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD127. NASA's observation says the sample did not ignite or keep a flame.",
     "evidence": "tried to ignite,  no joy, just a puff of smoke each time.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.2118,
     "max": 0.2118,
     "quality": "reported",
     "raw": "0.2118",
     "column": "as run matrix!AA127",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA127. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 100.95,
     "max": 100.95,
     "quality": "reported",
     "raw": "0.9963",
     "column": "as run matrix!AB127",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB127. NASA gives 0.9963 atm; multiplied by 101.325."
    },
    "test_date": {
     "text": "2013-06-01",
     "quality": "reported",
     "raw": "6/1/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/121",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 53",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 121,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "pmma sphere",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "pmma sphere",
     "column": "Fuel Sample Material"
    },
    "ignited": {
     "bool": true,
     "quality": "reported",
     "raw": "Good ignition",
     "column": "as run matrix!AD128",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AD128. NASA's observation describes a burning flame. It does not say how the test ended.",
     "evidence": "stagnation ignition in air.  Dynamic flow changes planned after igntion.  Good ignition, good dynamics from dim blue to sooty tail.  Bracketing was on  - 2 brackets plus dark frames.",
     "evidence_source": "file:PSI-26_Science Documents_As Run_Test Matrix.xlsx"
    },
    "o2_fraction": {
     "min": 0.2118,
     "max": 0.2118,
     "quality": "reported",
     "raw": "0.2118",
     "column": "as run matrix!AA128",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA128. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 100.95,
     "max": 100.95,
     "quality": "reported",
     "raw": "0.9963",
     "column": "as run matrix!AB128",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB128. NASA gives 0.9963 atm; multiplied by 101.325."
    },
    "test_date": {
     "text": "2013-06-01",
     "quality": "reported",
     "raw": "6/1/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-26/bass/122",
   "accession": "PSI-26",
   "investigation": "BASS",
   "type": "test",
   "label": "Test 53a",
   "source_table": "PSI-26_Experimental table_BASS.csv",
   "source_row": 122,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-26",
   "values": {
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "pmma sphere",
     "column": "Fuel Sample Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "Custom-made fabric samples consisting of 75% cotton and 25% fiberglass",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "sphere",
     "quality": "reported",
     "raw": "pmma sphere",
     "column": "Fuel Sample Material"
    },
    "o2_fraction": {
     "min": 0.2118,
     "max": 0.2118,
     "quality": "reported",
     "raw": "0.2118",
     "column": "as run matrix!AA129",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AA129. NASA's column is headed \"O2 % by volume\" but holds a fraction: 0.221 is 22.1%."
    },
    "pressure_kpa": {
     "min": 100.95,
     "max": 100.95,
     "quality": "reported",
     "raw": "0.9963",
     "column": "as run matrix!AB129",
     "note": "From NASA's file PSI-26_Science Documents_As Run_Test Matrix.xlsx, as run matrix!AB129. NASA gives 0.9963 atm; multiplied by 101.325."
    },
    "test_date": {
     "text": "2013-06-01",
     "quality": "reported",
     "raw": "6/1/2013",
     "column": "Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1212",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1212",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J8",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J8. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H8",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H8. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No ignition",
     "column": "Comments!B8",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B8. NASA's comment on this test.",
     "evidence": "Ran dummy test point w/ only igniters and intensified camera eyeled normally. Good, clear fuel, no bubbles. Perfect deployment, slight drift to lower igniter. No ignition. Slow drift S after igniters withdraw. Keep test point for vaporization info. Downlink file renamed to: FLEX-1212-2017-03-27-14h11m09s-F086A01.ts",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Master Sheet!G8",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G8. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Master Sheet!F8",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F8. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E8",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E8. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.419,
     "max": 4.419,
     "quality": "reported",
     "raw": "4.419",
     "column": "DATA!B8",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B8. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-03-27",
     "quality": "reported",
     "raw": "2017-03-27 00:00:00",
     "column": "Master Sheet!B8",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B8. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1214",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1214",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_mm2_s": {
     "min": 0.311,
     "max": 0.311,
     "quality": "reported",
     "raw": "0.311",
     "column": "DATA!D10",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D10. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burning",
     "column": "Comments!B10",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B10. NASA's comment on this test says a cool flame burned.",
     "evidence": "Moved igniters closer and increased time. Good deployment. Droplet moves to lower igniter, ignites, then drifts NW. Hot flame oscillates several times before extinguishing. Droplet leaves FOVs shortly after cool flame burning starts.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_mm": {
     "min": 4.133,
     "max": 4.133,
     "quality": "reported",
     "raw": "4.133",
     "column": "DATA!C10",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C10. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J10",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J10. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B10",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B10. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Moved igniters closer and increased time. Good deployment. Droplet moves to lower igniter, ignites, then drifts NW. Hot flame oscillates several times before extinguishing. Droplet leaves FOVs shortly after cool flame burning starts.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H10",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H10. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Master Sheet!G10",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G10. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Master Sheet!F10",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F10. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E10",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E10. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.37,
     "max": 4.37,
     "quality": "reported",
     "raw": "4.37",
     "column": "DATA!B10",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B10. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-03-27",
     "quality": "reported",
     "raw": "2017-03-27 00:00:00",
     "column": "Master Sheet!B10",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B10. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1230",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1230",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 3,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "DATA!E26",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E26. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.369,
     "max": 0.369,
     "quality": "reported",
     "raw": "0.369",
     "column": "DATA!D26",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D26. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 2.367,
     "max": 2.367,
     "quality": "reported",
     "raw": "2.367",
     "column": "DATA!F26",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F26. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.419,
     "max": 3.419,
     "quality": "reported",
     "raw": "3.419",
     "column": "DATA!C26",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C26. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J26",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J26. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B26",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B26. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Droplet drifted to lower igniter, ignited and drifted slowly S. Hot flame oscillations, extinction and re-ignition.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H26",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H26. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G26",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G26. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F26",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F26. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 202.65,
     "max": 202.65,
     "quality": "reported",
     "raw": "2 atm",
     "column": "Master Sheet!E26",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E26. This is a setting, not a measurement. NASA gives 2 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.026,
     "max": 4.026,
     "quality": "reported",
     "raw": "4.026",
     "column": "DATA!B26",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B26. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-04-05",
     "quality": "reported",
     "raw": "2017-04-05 00:00:00",
     "column": "Master Sheet!B26",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B26. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1231",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1231",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 4,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "ambient_temperature_c": {
     "min": 27.75,
     "max": 27.75,
     "quality": "reported",
     "raw": "300.90",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1231_TestSheet.txt, p. 1. NASA gives 300.90 K on the test sheet; 273.15 subtracted.",
     "evidence": "Temperature (K) = \t 300.90",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1231_TestSheet.txt"
    },
    "burning_rate_cool_mm2_s": {
     "min": 0.398,
     "max": 0.398,
     "quality": "reported",
     "raw": "0.398",
     "column": "DATA!E27",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E27. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "DATA!D27",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D27. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "description": {
     "text": "Fiber-supported.  Radiative extinction, cool flame burning and re-ignition.",
     "quality": "context",
     "raw": "Fiber-supported.  Radiative extinction, cool flame burning and re-ignition.",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1231_TestSheet.txt, p. 1. NASA's COMMENTS paragraph on the test sheet, exactly as written.",
     "evidence": "Fiber-supported.  Radiative extinction, cool flame burning and re-ignition.",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1231_TestSheet.txt"
    },
    "extinction_diameter_mm": {
     "min": 4.111,
     "max": 4.111,
     "quality": "reported",
     "raw": "4.111",
     "column": "DATA!C27",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C27. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1231_TestSheet.txt, p. 1. NASA's test sheet line \"Fiber:\", Yes or No.",
     "evidence": "Fiber: \tYes",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1231_TestSheet.txt"
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J27",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J27. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H27",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H27. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Master Sheet!G27",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G27. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Master Sheet!F27",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F27. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E27",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E27. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.141,
     "max": 4.141,
     "quality": "reported",
     "raw": "4.141",
     "column": "DATA!B27",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B27. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-04-05",
     "quality": "reported",
     "raw": "2017-04-05 00:00:00",
     "column": "Master Sheet!B27",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B27. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1232",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1232",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 5,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "ambient_temperature_c": {
     "min": 27.85,
     "max": 27.85,
     "quality": "reported",
     "raw": "301.00",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1232_TestSheet.txt, p. 1. NASA gives 301.00 K on the test sheet; 273.15 subtracted.",
     "evidence": "Temperature (K) = \t 301.00",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1232_TestSheet.txt"
    },
    "burning_rate_cool_mm2_s": {
     "min": 0.393,
     "max": 0.393,
     "quality": "reported",
     "raw": "0.393",
     "column": "DATA!E28",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E28. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.324,
     "max": 0.324,
     "quality": "reported",
     "raw": "0.324",
     "column": "DATA!D28",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D28. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "description": {
     "text": "Fiber-supported.  Radiative extinction, cool flame burning and re-ignition",
     "quality": "context",
     "raw": "Fiber-supported.  Radiative extinction, cool flame burning and re-ignition",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1232_TestSheet.txt, p. 1. NASA's COMMENTS paragraph on the test sheet, exactly as written.",
     "evidence": "Fiber-supported.  Radiative extinction, cool flame burning and re-ignition",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1232_TestSheet.txt"
    },
    "extinction_diameter_cool_mm": {
     "min": 1.347,
     "max": 1.347,
     "quality": "reported",
     "raw": "1.347",
     "column": "DATA!F28",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F28. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.296,
     "max": 4.296,
     "quality": "reported",
     "raw": "4.296",
     "column": "DATA!C28",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C28. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1232_TestSheet.txt, p. 1. NASA's test sheet line \"Fiber:\", Yes or No.",
     "evidence": "Fiber: \tYes",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1232_TestSheet.txt"
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J28",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J28. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H28",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H28. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Master Sheet!G28",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G28. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Master Sheet!F28",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F28. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E28",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E28. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.337,
     "max": 4.337,
     "quality": "reported",
     "raw": "4.337",
     "column": "DATA!B28",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B28. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-04-05",
     "quality": "reported",
     "raw": "2017-04-05 00:00:00",
     "column": "Master Sheet!B28",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B28. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1233",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1233",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 6,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.394,
     "max": 0.394,
     "quality": "reported",
     "raw": "0.394",
     "column": "DATA!E29",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E29. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.11,
     "max": 0.11,
     "quality": "reported",
     "raw": "0.11",
     "column": "DATA!D29",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D29. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.816,
     "max": 0.816,
     "quality": "reported",
     "raw": "0.816",
     "column": "DATA!F29",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F29. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.439,
     "max": 4.439,
     "quality": "reported",
     "raw": "4.439",
     "column": "DATA!C29",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C29. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J29",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J29. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H29",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H29. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Master Sheet!G29",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G29. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Master Sheet!F29",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F29. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E29",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E29. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.482,
     "max": 4.482,
     "quality": "reported",
     "raw": "4.482",
     "column": "DATA!B29",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B29. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-04-05",
     "quality": "reported",
     "raw": "2017-04-05 00:00:00",
     "column": "Master Sheet!B29",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B29. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1234",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1234",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 7,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.502,
     "max": 0.502,
     "quality": "reported",
     "raw": "0.502",
     "column": "DATA!E30",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E30. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.413,
     "max": 0.413,
     "quality": "reported",
     "raw": "0.413",
     "column": "DATA!D30",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D30. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.847,
     "max": 3.847,
     "quality": "reported",
     "raw": "3.847",
     "column": "DATA!C30",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C30. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J30",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J30. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B30",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B30. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good development on fiber. Ignition occurs in about 6 sec. Very sooty hot flame burns for approximately 13 sec. Intensified camera did not switch to cool flame mode until end of burn. Droplet burns to completion with no re-ignition or vapor cloud. Hot flaem oscillated before extinguishing.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H30",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H30. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G30",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G30. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F30",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F30. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E30",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E30. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.418,
     "max": 4.418,
     "quality": "reported",
     "raw": "4.418",
     "column": "DATA!B30",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B30. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-04-12",
     "quality": "reported",
     "raw": "2017-04-12 00:00:00",
     "column": "Master Sheet!B30",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B30. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1235",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1235",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 8,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J31",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J31. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B31",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B31. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Still a lot of droplet motion on needles. Perfect deploymen. No motion during ignition. Igniters burned out. Saving for vaporization info.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H31",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H31. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G31",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G31. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F31",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F31. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E31",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E31. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-04-12",
     "quality": "reported",
     "raw": "2017-04-12 00:00:00",
     "column": "Master Sheet!B31",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B31. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1236",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1236",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 9,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.325,
     "max": 0.325,
     "quality": "reported",
     "raw": "0.325",
     "column": "DATA!E32",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E32. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.301,
     "max": 0.301,
     "quality": "reported",
     "raw": "0.301",
     "column": "DATA!D32",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D32. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B32",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B32. NASA's comment on this test says a cool flame burned.",
     "evidence": "First test with new software. Hot-flames mode on intensified camera for whole test. Excellent hot flame burn. Large dim blue, spherical flame. 12 sec hot-flame burn. Long cool flame burn. Residual droplet on fiber, but hard to see because of vapor cloud. Extinctio droplet diameter seems smaller than expected.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_cool_mm": {
     "min": 1.787,
     "max": 1.787,
     "quality": "reported",
     "raw": "1.787",
     "column": "DATA!F32",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F32. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.316,
     "max": 4.316,
     "quality": "reported",
     "raw": "4.316",
     "column": "DATA!C32",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C32. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J32",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J32. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B32",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B32. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "First test with new software. Hot-flames mode on intensified camera for whole test. Excellent hot flame burn. Large dim blue, spherical flame. 12 sec hot-flame burn. Long cool flame burn. Residual droplet on fiber, but hard to see because of vapor cloud. Extinctio droplet diameter seems smaller than expected.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H32",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H32. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G32",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G32. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F32",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F32. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 50.6625,
     "quality": "reported",
     "raw": ".5 atm",
     "column": "Master Sheet!E32",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E32. This is a setting, not a measurement. NASA gives .5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.695,
     "max": 4.695,
     "quality": "reported",
     "raw": "4.695",
     "column": "DATA!B32",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B32. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-01",
     "quality": "reported",
     "raw": "2017-05-01 00:00:00",
     "column": "Master Sheet!B32",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B32. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1237",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1237",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 10,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.324,
     "max": 0.324,
     "quality": "reported",
     "raw": "0.324",
     "column": "DATA!E33",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E33. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.319,
     "max": 0.319,
     "quality": "reported",
     "raw": "0.319",
     "column": "DATA!D33",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D33. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 1.731,
     "max": 1.731,
     "quality": "reported",
     "raw": "1.731",
     "column": "DATA!F33",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F33. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.863,
     "max": 3.863,
     "quality": "reported",
     "raw": "3.863",
     "column": "DATA!C33",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C33. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J33",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J33. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B33",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B33. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Fuel started bubbling. Camera in nominal Hot-cool operating mode. Bubbling seemed to get better. Hot flame ignited burned for several seconds and ignited residual droplet from last test. Brief envelope flame around both droplets then small droplet disrupted and left a spherical hot flame. Hot flame extinguished, larged vapor cloud and cool flame extinction. Residual droplet very cloudy. Vaporized droplet off fiber at 5W - mini-cool flame?",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H33",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H33. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G33",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G33. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F33",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F33. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 50.6625,
     "quality": "reported",
     "raw": ".5 atm",
     "column": "Master Sheet!E33",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E33. This is a setting, not a measurement. NASA gives .5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.298,
     "max": 4.298,
     "quality": "reported",
     "raw": "4.298",
     "column": "DATA!B33",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B33. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1238",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1238",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 11,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "ambient_temperature_c": {
     "min": 27.48,
     "max": 27.48,
     "quality": "reported",
     "raw": "300.63",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1238_TestSheet.txt, p. 1. NASA gives 300.63 K on the test sheet; 273.15 subtracted.",
     "evidence": "Temperature (K) = \t 300.63",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1238_TestSheet.txt"
    },
    "burning_rate_cool_mm2_s": {
     "min": 0.328,
     "max": 0.328,
     "quality": "reported",
     "raw": "0.328",
     "column": "DATA!E34",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E34. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.369,
     "max": 0.369,
     "quality": "reported",
     "raw": "0.369",
     "column": "DATA!D34",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D34. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B34",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B34. NASA's comment on this test says a cool flame burned.",
     "evidence": "Using residual droplet from last test. Very long ignition time, but went directly to hot flame. Did not go to cool flames. Good fiber supported test. Long hot-flame burn. Long cool flame burn and large vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "description": {
     "text": "Fiber-supported.  Long, low power ignition.  Radiative extinction, cool flame burning and extinction.",
     "quality": "context",
     "raw": "Fiber-supported.  Long, low power ignition.  Radiative extinction, cool flame burning and extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1238_TestSheet.txt, p. 1. NASA's COMMENTS paragraph on the test sheet, exactly as written.",
     "evidence": "Fiber-supported.  Long, low power ignition.  Radiative extinction, cool flame burning and extinction.",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1238_TestSheet.txt"
    },
    "extinction_diameter_cool_mm": {
     "min": 1.78,
     "max": 1.78,
     "quality": "reported",
     "raw": "1.78",
     "column": "DATA!F34",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F34. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.015,
     "max": 4.015,
     "quality": "reported",
     "raw": "4.015",
     "column": "DATA!C34",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C34. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1238_TestSheet.txt, p. 1. NASA's test sheet line \"Fiber:\", Yes or No.",
     "evidence": "Fiber: \tYes",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1238_TestSheet.txt"
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J34",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J34. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B34",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B34. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Using residual droplet from last test. Very long ignition time, but went directly to hot flame. Did not go to cool flames. Good fiber supported test. Long hot-flame burn. Long cool flame burn and large vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H34",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H34. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G34",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G34. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F34",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F34. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 50.6625,
     "quality": "reported",
     "raw": ".5 atm",
     "column": "Master Sheet!E34",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E34. This is a setting, not a measurement. NASA gives .5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.463,
     "max": 4.463,
     "quality": "reported",
     "raw": "4.463",
     "column": "DATA!B34",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B34. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-01",
     "quality": "reported",
     "raw": "2017-05-01 00:00:00",
     "column": "Master Sheet!B34",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B34. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1239",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1239",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 12,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.31,
     "max": 0.31,
     "quality": "reported",
     "raw": "0.31",
     "column": "DATA!E35",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E35. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.318,
     "max": 0.318,
     "quality": "reported",
     "raw": "0.318",
     "column": "DATA!D35",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D35. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B35",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B35. NASA's comment on this test says a cool flame burned.",
     "evidence": "Free-floated test. Perfect deployment. Good ignition. Droplet stayed in FOV for the entire test. Nice spherical hot flame, no pre-extinction, flame oscillations. Long cool flame burn and huge vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_cool_mm": {
     "min": 1.915,
     "max": 1.915,
     "quality": "reported",
     "raw": "1.915",
     "column": "DATA!F35",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F35. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.923,
     "max": 3.923,
     "quality": "reported",
     "raw": "3.923",
     "column": "DATA!C35",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C35. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J35",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J35. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B35",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B35. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Free-floated test. Perfect deployment. Good ignition. Droplet stayed in FOV for the entire test. Nice spherical hot flame, no pre-extinction, flame oscillations. Long cool flame burn and huge vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H35",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H35. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G35",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G35. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F35",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F35. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 50.6625,
     "quality": "reported",
     "raw": ".5 atm",
     "column": "Master Sheet!E35",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E35. This is a setting, not a measurement. NASA gives .5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.393,
     "max": 4.393,
     "quality": "reported",
     "raw": "4.393",
     "column": "DATA!B35",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B35. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-01",
     "quality": "reported",
     "raw": "2017-05-01 00:00:00",
     "column": "Master Sheet!B35",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B35. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1240",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1240",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 13,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "ambient_temperature_c": {
     "min": 27.54,
     "max": 27.54,
     "quality": "reported",
     "raw": "300.69",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1240_TestSheet.txt, p. 1. NASA gives 300.69 K on the test sheet; 273.15 subtracted.",
     "evidence": "Temperature (K) = \t 300.69",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1240_TestSheet.txt"
    },
    "burning_rate_cool_mm2_s": {
     "min": 0.311,
     "max": 0.311,
     "quality": "reported",
     "raw": "0.311",
     "column": "DATA!E36",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E36. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.351,
     "max": 0.351,
     "quality": "reported",
     "raw": "0.351",
     "column": "DATA!D36",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D36. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B36",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B36. NASA's comment on this test says a cool flame burned.",
     "evidence": "Getting some large bubbles. Excellent deployment and ignition. Long hot flame burn, no pre-extinction. Flame oscillations. Long cool flame burn and large vapor cloud. Droplet stayed in FOV for the entire test.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "description": {
     "text": "Fiber-supported.  Radiative extinction, cool flame burning and extinction, vapor cloud.",
     "quality": "context",
     "raw": "Fiber-supported.  Radiative extinction, cool flame burning and extinction, vapor cloud.",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1240_TestSheet.txt, p. 1. NASA's COMMENTS paragraph on the test sheet, exactly as written.",
     "evidence": "Fiber-supported.  Radiative extinction, cool flame burning and extinction, vapor cloud.",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1240_TestSheet.txt"
    },
    "extinction_diameter_cool_mm": {
     "min": 1.903,
     "max": 1.903,
     "quality": "reported",
     "raw": "1.903",
     "column": "DATA!F36",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F36. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.485,
     "max": 3.485,
     "quality": "reported",
     "raw": "3.485",
     "column": "DATA!C36",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C36. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1240_TestSheet.txt, p. 1. NASA's test sheet line \"Fiber:\", Yes or No.",
     "evidence": "Fiber: \tNo",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1240_TestSheet.txt"
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J36",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J36. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B36",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B36. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Getting some large bubbles. Excellent deployment and ignition. Long hot flame burn, no pre-extinction. Flame oscillations. Long cool flame burn and large vapor cloud. Droplet stayed in FOV for the entire test.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H36",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H36. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G36",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G36. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F36",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F36. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 50.6625,
     "quality": "reported",
     "raw": ".5 atm",
     "column": "Master Sheet!E36",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E36. This is a setting, not a measurement. NASA gives .5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.081,
     "max": 4.081,
     "quality": "reported",
     "raw": "4.081",
     "column": "DATA!B36",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B36. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-01",
     "quality": "reported",
     "raw": "2017-05-01 00:00:00",
     "column": "Master Sheet!B36",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B36. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1241",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1241",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 14,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J37",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J37. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B37",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B37. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Lost first droplet to lower needle. Drifted to lower ignite (SE1 after deployment). Droplet hit igniter, ignited drifted quickly NW and out of FOV. Droplet left FOV before hot flame extinction. Hot flame oscillated before extinguishing.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H37",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H37. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G37",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G37. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F37",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F37. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 50.6625,
     "quality": "reported",
     "raw": "0.5 atm",
     "column": "Master Sheet!E37",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E37. This is a setting, not a measurement. NASA gives 0.5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-05-01",
     "quality": "reported",
     "raw": "2017-05-01 00:00:00",
     "column": "Master Sheet!B37",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B37. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1242",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1242",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 15,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.365,
     "max": 0.365,
     "quality": "reported",
     "raw": "0.365",
     "column": "DATA!E38",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E38. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.333,
     "max": 0.333,
     "quality": "reported",
     "raw": "0.333",
     "column": "DATA!D38",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D38. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.681,
     "max": 0.681,
     "quality": "reported",
     "raw": "0.681",
     "column": "DATA!F38",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F38. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.95,
     "max": 3.95,
     "quality": "reported",
     "raw": "3.95",
     "column": "DATA!C38",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C38. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J38",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J38. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H38",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H38. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G38",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G38. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F38",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F38. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 75.99375,
     "max": 75.99375,
     "quality": "reported",
     "raw": ".75 atm",
     "column": "Master Sheet!E38",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E38. This is a setting, not a measurement. NASA gives .75 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.362,
     "max": 4.362,
     "quality": "reported",
     "raw": "4.362",
     "column": "DATA!B38",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B38. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-03",
     "quality": "reported",
     "raw": "2017-05-03 00:00:00",
     "column": "Master Sheet!B38",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B38. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1243",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1243",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 16,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.366,
     "max": 0.366,
     "quality": "reported",
     "raw": "0.366",
     "column": "DATA!E39",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E39. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.338,
     "max": 0.338,
     "quality": "reported",
     "raw": "0.338",
     "column": "DATA!D39",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D39. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B39",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B39. NASA's comment on this test says a cool flame burned.",
     "evidence": "Repeat last test since intensified camera may have been in pulsed mode for entire test. Results almost identical to last test. Flame ignites in 6 sec. Hot flame burns for ~12 sec w/ dim blue flame - no oscillations before extinction. Vapor cloud started to form ~30 sec after ignition. Long cool flame burn and large vapor cloud. Vapor cloud likely started to form before cool flame extinction.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_cool_mm": {
     "min": 0.792,
     "max": 0.792,
     "quality": "reported",
     "raw": "0.792",
     "column": "DATA!F39",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F39. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.924,
     "max": 3.924,
     "quality": "reported",
     "raw": "3.924",
     "column": "DATA!C39",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C39. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J39",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J39. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H39",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H39. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G39",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G39. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F39",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F39. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 75.99375,
     "max": 75.99375,
     "quality": "reported",
     "raw": ".75 atm",
     "column": "Master Sheet!E39",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E39. This is a setting, not a measurement. NASA gives .75 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.352,
     "max": 4.352,
     "quality": "reported",
     "raw": "4.352",
     "column": "DATA!B39",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B39. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-03",
     "quality": "reported",
     "raw": "2017-05-03 00:00:00",
     "column": "Master Sheet!B39",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B39. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1244",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1244",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 17,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "DATA!E40",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E40. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.381,
     "max": 0.381,
     "quality": "reported",
     "raw": "0.381",
     "column": "DATA!D40",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D40. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 1.139,
     "max": 1.139,
     "quality": "reported",
     "raw": "1.139",
     "column": "DATA!F40",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F40. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.931,
     "max": 3.931,
     "quality": "reported",
     "raw": "3.931",
     "column": "DATA!C40",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C40. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J40",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J40. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H40",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H40. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G40",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G40. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F40",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F40. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 75.99375,
     "max": 75.99375,
     "quality": "reported",
     "raw": ".75 atm",
     "column": "Master Sheet!E40",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E40. This is a setting, not a measurement. NASA gives .75 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.465,
     "max": 4.465,
     "quality": "reported",
     "raw": "4.465",
     "column": "DATA!B40",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B40. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-03",
     "quality": "reported",
     "raw": "2017-05-03 00:00:00",
     "column": "Master Sheet!B40",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B40. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1245",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1245",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 18,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.352,
     "max": 0.352,
     "quality": "reported",
     "raw": "0.352",
     "column": "DATA!E41",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E41. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.366,
     "max": 0.366,
     "quality": "reported",
     "raw": "0.366",
     "column": "DATA!D41",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D41. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.882,
     "max": 0.882,
     "quality": "reported",
     "raw": "0.882",
     "column": "DATA!F41",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F41. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.753,
     "max": 3.753,
     "quality": "reported",
     "raw": "3.753",
     "column": "DATA!C41",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C41. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J41",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J41. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B41",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B41. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Moving to free-float tests. Some fuel [jitter?] on needles. Slight drift S after deployment, but droplet stopped just S of igniters. Droplet ignited and had very slow drift SE. Droplet likely remained in FOV for entire test. Droplet ignited in 8 sec w/ [luminous?] hot flame becoming dim blue. Hot flame burned for 12 sec, vapor cloud at 30 sec. Large vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H41",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H41. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G41",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G41. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F41",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F41. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 75.99375,
     "max": 75.99375,
     "quality": "reported",
     "raw": ".75 atm",
     "column": "Master Sheet!E41",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E41. This is a setting, not a measurement. NASA gives .75 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.197,
     "max": 4.197,
     "quality": "reported",
     "raw": "4.197",
     "column": "DATA!B41",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B41. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-03",
     "quality": "reported",
     "raw": "2017-05-03 00:00:00",
     "column": "Master Sheet!B41",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B41. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1246",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1246",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 19,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.338,
     "max": 0.338,
     "quality": "reported",
     "raw": "0.338",
     "column": "DATA!E42",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E42. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.356,
     "max": 0.356,
     "quality": "reported",
     "raw": "0.356",
     "column": "DATA!D42",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D42. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.978,
     "max": 0.978,
     "quality": "reported",
     "raw": "0.978",
     "column": "DATA!F42",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F42. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "4",
     "column": "DATA!C42",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C42. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J42",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J42. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B42",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B42. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Free-floated. Droplet drifts E-SE after deployment and ignition. Drift is slow, to lower igniter. Ignites in ~7 sec after hitting igniter. Continues to drift E slowly. Hot flame burned for ~10 sec. Droplet likely left FOV ~25 sec after ignition.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H42",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H42. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G42",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G42. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F42",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F42. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 75.99375,
     "max": 75.99375,
     "quality": "reported",
     "raw": ".75 atm",
     "column": "Master Sheet!E42",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E42. This is a setting, not a measurement. NASA gives .75 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.378,
     "max": 4.378,
     "quality": "reported",
     "raw": "4.378",
     "column": "DATA!B42",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B42. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-03",
     "quality": "reported",
     "raw": "2017-05-03 00:00:00",
     "column": "Master Sheet!B42",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B42. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1247",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1247",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 20,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_mm2_s": {
     "min": 0.326,
     "max": 0.326,
     "quality": "reported",
     "raw": "0.326",
     "column": "DATA!D43",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D43. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.059,
     "max": 4.059,
     "quality": "reported",
     "raw": "4.059",
     "column": "DATA!C43",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C43. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J43",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J43. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B43",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B43. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Some small bubbles that diappeared during dispense. Lost first droplet to lower needle. Droplet drifted to lower igniter, hit igniter and drifted SE and out of FOV close to when hot flame extinguished. Flame oscillations before extinction.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H43",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H43. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G43",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G43. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F43",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F43. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E43",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E43. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.408,
     "max": 4.408,
     "quality": "reported",
     "raw": "4.408",
     "column": "DATA!B43",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B43. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-03",
     "quality": "reported",
     "raw": "2017-05-03 00:00:00",
     "column": "Master Sheet!B43",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B43. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1248",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1248",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 21,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "ambient_temperature_c": {
     "min": 26.6,
     "max": 26.6,
     "quality": "reported",
     "raw": "299.75",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1248_TestSheet.txt, p. 1. NASA gives 299.75 K on the test sheet; 273.15 subtracted.",
     "evidence": "Temperature (K) = \t 299.75",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1248_TestSheet.txt"
    },
    "burning_rate_cool_mm2_s": {
     "min": 0.402,
     "max": 0.402,
     "quality": "reported",
     "raw": "0.402",
     "column": "DATA!E44",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E44. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.409,
     "max": 0.409,
     "quality": "reported",
     "raw": "0.409",
     "column": "DATA!D44",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D44. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "description": {
     "text": "Fiber-supported.  Radiative extinction, cool flame burning and burnout or extinction, large vapor cloud.",
     "quality": "context",
     "raw": "Fiber-supported.  Radiative extinction, cool flame burning and burnout or extinction, large vapor cloud.",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1248_TestSheet.txt, p. 1. NASA's COMMENTS paragraph on the test sheet, exactly as written.",
     "evidence": "Fiber-supported.  Radiative extinction, cool flame burning and burnout or extinction, large vapor cloud.",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1248_TestSheet.txt"
    },
    "extinction_diameter_cool_mm": {
     "min": 0.524,
     "max": 0.524,
     "quality": "reported",
     "raw": "0.524",
     "column": "DATA!F44",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F44. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.04,
     "max": 4.04,
     "quality": "reported",
     "raw": "4.04",
     "column": "DATA!C44",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C44. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1248_TestSheet.txt, p. 1. NASA's test sheet line \"Fiber:\", Yes or No.",
     "evidence": "Fiber: \tYes",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1248_TestSheet.txt"
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J44",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J44. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B44",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B44. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Increased burn-to-completion time to 63 s. Good deployment. Small puff on upper igniter, but OK. Droplet drifted to upper igniter, but ignited and stayed in place (fiber). Good hot-flame burn, bright yellow becoming dim blue, extinction 12 sec after igniter withdraw. Vapor cloud forms ~30 sec after igniter withdraw.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H44",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H44. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G44",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G44. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F44",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F44. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E44",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E44. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.385,
     "max": 4.385,
     "quality": "reported",
     "raw": "4.385",
     "column": "DATA!B44",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B44. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-05",
     "quality": "reported",
     "raw": "2017-05-05 00:00:00",
     "column": "Master Sheet!B44",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B44. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1249",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1249",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 22,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.418,
     "max": 0.418,
     "quality": "reported",
     "raw": "0.418",
     "column": "DATA!E45",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E45. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.426,
     "max": 0.426,
     "quality": "reported",
     "raw": "0.426",
     "column": "DATA!D45",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D45. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.323,
     "max": 0.323,
     "quality": "reported",
     "raw": "0.323",
     "column": "DATA!F45",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F45. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.636,
     "max": 3.636,
     "quality": "reported",
     "raw": "3.636",
     "column": "DATA!C45",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C45. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J45",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J45. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B45",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B45. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Trying DTC ignition w/ slightly lower igniter power. Using same thresholds as FLEX-1244 (F123A03). Droplet drifted to upper igniter immediately after deployment. Droplet very close to igniter. Ignited hot flame after ~11 sec. Same hot-flame behavior as previous test. Hot flame luminous yellow turns dim blue burns for 10 sec. Vapor cloud formation after 30 sec (igniter wdw).",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H45",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H45. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G45",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G45. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F45",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F45. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E45",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E45. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.127,
     "max": 4.127,
     "quality": "reported",
     "raw": "4.127",
     "column": "DATA!B45",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B45. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-05",
     "quality": "reported",
     "raw": "2017-05-05 00:00:00",
     "column": "Master Sheet!B45",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B45. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1250",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1250",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 23,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "ambient_temperature_c": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "300.14",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1250_TestSheet.txt, p. 1. NASA gives 300.14 K on the test sheet; 273.15 subtracted.",
     "evidence": "Temperature (K) = \t 300.14",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1250_TestSheet.txt"
    },
    "burning_rate_cool_mm2_s": {
     "min": 0.387,
     "max": 0.387,
     "quality": "reported",
     "raw": "0.387",
     "column": "DATA!E46",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E46. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.383,
     "max": 0.383,
     "quality": "reported",
     "raw": "0.383",
     "column": "DATA!D46",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D46. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool-flame burn",
     "column": "Comments!B46",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B46. NASA's comment on this test says a cool flame burned.",
     "evidence": "No fuel bubbling. Perfect deployment and ignition. Almost no drift. Droplet stays in FOW for entire test with almost no drift. Typical hot-flame burn with luminous yellow flame turns quickly dim blue and extinguishes after ~12 sec. Long cool-flame burn. Vapor cloud forms ~30 sec after igniter withdraw.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "description": {
     "text": "Free-floated.  Perfect deployment and test.  Radiative extinction, cool flame burning and extinction.",
     "quality": "context",
     "raw": "Free-floated.  Perfect deployment and test.  Radiative extinction, cool flame burning and extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1250_TestSheet.txt, p. 1. NASA's COMMENTS paragraph on the test sheet, exactly as written.",
     "evidence": "Free-floated.  Perfect deployment and test.  Radiative extinction, cool flame burning and extinction.",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1250_TestSheet.txt"
    },
    "extinction_diameter_cool_mm": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "DATA!F46",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F46. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.554,
     "max": 3.554,
     "quality": "reported",
     "raw": "3.554",
     "column": "DATA!C46",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C46. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1250_TestSheet.txt, p. 1. NASA's test sheet line \"Fiber:\", Yes or No.",
     "evidence": "Fiber: \tNo",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1250_TestSheet.txt"
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J46",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J46. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B46",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B46. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "No fuel bubbling. Perfect deployment and ignition. Almost no drift. Droplet stays in FOW for entire test with almost no drift. Typical hot-flame burn with luminous yellow flame turns quickly dim blue and extinguishes after ~12 sec. Long cool-flame burn. Vapor cloud forms ~30 sec after igniter withdraw.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H46",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H46. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G46",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G46. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F46",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F46. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E46",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E46. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.042,
     "max": 4.042,
     "quality": "reported",
     "raw": "4.042",
     "column": "DATA!B46",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B46. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-05",
     "quality": "reported",
     "raw": "2017-05-05 00:00:00",
     "column": "Master Sheet!B46",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B46. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1251",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1251",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 24,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.392,
     "max": 0.392,
     "quality": "reported",
     "raw": "0.392",
     "column": "DATA!E47",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E47. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.379,
     "max": 0.379,
     "quality": "reported",
     "raw": "0.379",
     "column": "DATA!D47",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D47. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 2.972,
     "max": 2.972,
     "quality": "reported",
     "raw": "2.972",
     "column": "DATA!F47",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F47. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.571,
     "max": 3.571,
     "quality": "reported",
     "raw": "3.571",
     "column": "DATA!C47",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C47. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J47",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J47. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B47",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B47. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Maybe under-stretched? Slow drift E towards upper igniter. Droplet hit igniter and continued slow drift E. Likely stayed in HiBMS FOV for ~20 sec after igniter withdraw. Flame oscillations before hot-flame extinction. hot flame burned for ~12 sec. Long cool.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H47",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H47. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G47",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G47. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F47",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F47. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E47",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E47. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.137,
     "max": 4.137,
     "quality": "reported",
     "raw": "4.137",
     "column": "DATA!B47",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B47. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-05",
     "quality": "reported",
     "raw": "2017-05-05 00:00:00",
     "column": "Master Sheet!B47",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B47. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1252",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1252",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 25,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.362,
     "max": 0.362,
     "quality": "reported",
     "raw": "0.362",
     "column": "DATA!E48",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E48. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.398,
     "max": 0.398,
     "quality": "reported",
     "raw": "0.398",
     "column": "DATA!D48",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D48. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.257,
     "max": 0.257,
     "quality": "reported",
     "raw": "0.257",
     "column": "DATA!F48",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F48. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.372,
     "max": 3.372,
     "quality": "reported",
     "raw": "3.372",
     "column": "DATA!C48",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C48. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J48",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J48. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B48",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B48. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Moved upper igniter away (500 cts). Droplet drifted to lower igniter, hit igniter and continued drift S-Se. The droplet likely moved out of the HiBMS FOV before hot-flame extinction and left color camera FOV when hot flame extinguished.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H48",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H48. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G48",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G48. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F48",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F48. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E48",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E48. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.038,
     "max": 4.038,
     "quality": "reported",
     "raw": "4.038",
     "column": "DATA!B48",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B48. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-05",
     "quality": "reported",
     "raw": "2017-05-05 00:00:00",
     "column": "Master Sheet!B48",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B48. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1253",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1253",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 26,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "ambient_temperature_c": {
     "min": 27.58,
     "max": 27.58,
     "quality": "reported",
     "raw": "300.73",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1253_TestSheet.txt, p. 1. NASA gives 300.73 K on the test sheet; 273.15 subtracted.",
     "evidence": "Temperature (K) = \t 300.73",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1253_TestSheet.txt"
    },
    "burning_rate_cool_mm2_s": {
     "min": 0.399,
     "max": 0.399,
     "quality": "reported",
     "raw": "0.399",
     "column": "DATA!E49",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E49. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.47,
     "max": 0.47,
     "quality": "reported",
     "raw": "0.47",
     "column": "DATA!D49",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D49. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B49",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B49. NASA's comment on this test says a cool flame burned.",
     "evidence": "Trying DTC ignition again. Deploy droplet on fiber first, then run AS. Droplet dituated prefectly between igniters. Igniters on for 15 sec before getting hot flame ignition. Good hot-flame ignition and burn. Hot flame burned for ~10 sec. Long cool flame burn and large vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "description": {
     "text": "Fiber-supported.  Long, low-power ignition.  Radiative extinction, cool flame burning and extinction.",
     "quality": "context",
     "raw": "Fiber-supported.  Long, low-power ignition.  Radiative extinction, cool flame burning and extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1253_TestSheet.txt, p. 1. NASA's COMMENTS paragraph on the test sheet, exactly as written.",
     "evidence": "Fiber-supported.  Long, low-power ignition.  Radiative extinction, cool flame burning and extinction.",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1253_TestSheet.txt"
    },
    "extinction_diameter_cool_mm": {
     "min": 0.851,
     "max": 0.851,
     "quality": "reported",
     "raw": "0.851",
     "column": "DATA!F49",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F49. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.858,
     "max": 3.858,
     "quality": "reported",
     "raw": "3.858",
     "column": "DATA!C49",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C49. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1253_TestSheet.txt, p. 1. NASA's test sheet line \"Fiber:\", Yes or No.",
     "evidence": "Fiber: \tYes",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1253_TestSheet.txt"
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J49",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J49. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B49",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B49. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Trying DTC ignition again. Deploy droplet on fiber first, then run AS. Droplet dituated prefectly between igniters. Igniters on for 15 sec before getting hot flame ignition. Good hot-flame ignition and burn. Hot flame burned for ~10 sec. Long cool flame burn and large vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H49",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H49. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G49",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G49. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F49",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F49. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E49",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E49. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.282,
     "max": 4.282,
     "quality": "reported",
     "raw": "4.282",
     "column": "DATA!B49",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B49. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-05",
     "quality": "reported",
     "raw": "2017-05-05 00:00:00",
     "column": "Master Sheet!B49",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B49. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1254",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1254",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 27,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.506,
     "max": 0.506,
     "quality": "reported",
     "raw": "0.506",
     "column": "DATA!E50",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E50. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.338,
     "max": 0.338,
     "quality": "reported",
     "raw": "0.338",
     "column": "DATA!D50",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D50. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B50",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B50. NASA's comment on this test says a cool flame burned.",
     "evidence": "No bubbling in initial fuel dispense. Good deployment on fiber. Good hot-flame ignition. Luminous yellow flame becomes dim blue oscillates and then extinguishes. Long cool flame burn, no residual droplet on fiber. No vapor cloud or re-ignition. Camera settings didn't change as set.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_cool_mm": {
     "min": 0.204,
     "max": 0.204,
     "quality": "reported",
     "raw": "0.204",
     "column": "DATA!F50",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F50. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.669,
     "max": 3.669,
     "quality": "reported",
     "raw": "3.669",
     "column": "DATA!C50",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C50. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J50",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J50. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B50",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B50. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "No bubbling in initial fuel dispense. Good deployment on fiber. Good hot-flame ignition. Luminous yellow flame becomes dim blue oscillates and then extinguishes. Long cool flame burn, no residual droplet on fiber. No vapor cloud or re-ignition. Camera settings didn't change as set.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H50",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H50. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G50",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G50. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F50",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F50. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E50",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E50. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.105,
     "max": 4.105,
     "quality": "reported",
     "raw": "4.105",
     "column": "DATA!B50",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B50. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-10",
     "quality": "reported",
     "raw": "2017-05-10 00:00:00",
     "column": "Master Sheet!B50",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B50. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1255",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1255",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 28,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.492,
     "max": 0.492,
     "quality": "reported",
     "raw": "0.492",
     "column": "DATA!E51",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E51. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.412,
     "max": 0.412,
     "quality": "reported",
     "raw": "0.412",
     "column": "DATA!D51",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D51. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B51",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B51. NASA's comment on this test says a cool flame burned.",
     "evidence": "Using residual droplet from last last size is ~3.8 mm. Ignition to hot flame at t > 10 sec. Luminous hot flame turns dim blue, oscillates then extinguishes. Long cool flame burn with no residual droplet and no vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_mm": {
     "min": 3.61,
     "max": 3.61,
     "quality": "reported",
     "raw": "3.61",
     "column": "DATA!C51",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C51. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J51",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J51. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B51",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B51. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Using residual droplet from last last size is ~3.8 mm. Ignition to hot flame at t > 10 sec. Luminous hot flame turns dim blue, oscillates then extinguishes. Long cool flame burn with no residual droplet and no vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H51",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H51. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G51",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G51. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F51",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F51. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E51",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E51. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.251,
     "max": 4.251,
     "quality": "reported",
     "raw": "4.251",
     "column": "DATA!B51",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B51. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-10",
     "quality": "reported",
     "raw": "2017-05-10 00:00:00",
     "column": "Master Sheet!B51",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B51. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1256",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1256",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 29,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.491,
     "max": 0.491,
     "quality": "reported",
     "raw": "0.491",
     "column": "DATA!E52",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E52. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "DATA!D52",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D52. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "Cool flame burning",
     "column": "Comments!B52",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B52. NASA's comment on this test says a cool flame burned.",
     "evidence": "Repeating F130A01 with correct camera settings. Nominal test HTC ignition. Good hot flame ignition. Luminous yellow flame becomes dim blue, oscillates and extinguishes. Cool flame burning w/ slight image present on color camera. Faint image disappears and cool flame starts to pulse. No re-ignition.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_mm": {
     "min": 3.734,
     "max": 3.734,
     "quality": "reported",
     "raw": "3.734",
     "column": "DATA!C52",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C52. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J52",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J52. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H52",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H52. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G52",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G52. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F52",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F52. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E52",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E52. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.193,
     "max": 4.193,
     "quality": "reported",
     "raw": "4.193",
     "column": "DATA!B52",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B52. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-10",
     "quality": "reported",
     "raw": "2017-05-10 00:00:00",
     "column": "Master Sheet!B52",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B52. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1257",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1257",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 30,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.535,
     "max": 0.535,
     "quality": "reported",
     "raw": "0.535",
     "column": "DATA!E53",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E53. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.373,
     "max": 0.373,
     "quality": "reported",
     "raw": "0.373",
     "column": "DATA!D53",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D53. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B53",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B53. NASA's comment on this test says a cool flame burned.",
     "evidence": "Still no fuel bubbling. Excellent deployment. Droplet motionless on ignition. Begins a slow drift N after igniters move away. Luminous flame turns dim blue oscillates and extinguishes. Short cool flame burn, re-ignition of hot flame. Re-ignited hot flame oscillates then becomes steady spherical flame that burns to completion. Drifts out of FOV before burn complete. Fuel start 154041 Now 136872.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_mm": {
     "min": 3.578,
     "max": 3.578,
     "quality": "reported",
     "raw": "3.578",
     "column": "DATA!C53",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C53. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J53",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J53. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B53",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B53. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Still no fuel bubbling. Excellent deployment. Droplet motionless on ignition. Begins a slow drift N after igniters move away. Luminous flame turns dim blue oscillates and extinguishes. Short cool flame burn, re-ignition of hot flame. Re-ignited hot flame oscillates then becomes steady spherical flame that burns to completion. Drifts out of FOV before burn complete. Fuel start 154041 Now 136872.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H53",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H53. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G53",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G53. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F53",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F53. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E53",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E53. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.262,
     "max": 4.262,
     "quality": "reported",
     "raw": "4.262",
     "column": "DATA!B53",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B53. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-10",
     "quality": "reported",
     "raw": "2017-05-10 00:00:00",
     "column": "Master Sheet!B53",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B53. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1258",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1258",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 31,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.413,
     "max": 0.413,
     "quality": "reported",
     "raw": "0.413",
     "column": "DATA!E54",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E54. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.215,
     "max": 0.215,
     "quality": "reported",
     "raw": "0.215",
     "column": "DATA!D54",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D54. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.963,
     "max": 0.963,
     "quality": "reported",
     "raw": "0.963",
     "column": "DATA!F54",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F54. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 5.294,
     "max": 5.294,
     "quality": "reported",
     "raw": "5.294",
     "column": "DATA!C54",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C54. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J54",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J54. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H54",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H54. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G54",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G54. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F54",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F54. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E54",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E54. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 5.493,
     "max": 5.493,
     "quality": "reported",
     "raw": "5.493",
     "column": "DATA!B54",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B54. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-10",
     "quality": "reported",
     "raw": "2017-05-10 00:00:00",
     "column": "Master Sheet!B54",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B54. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1259",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1259",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 32,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.501,
     "max": 0.501,
     "quality": "reported",
     "raw": "0.501",
     "column": "DATA!E55",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E55. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.588,
     "max": 0.588,
     "quality": "reported",
     "raw": "0.588",
     "column": "DATA!D55",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D55. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.188,
     "max": 0.188,
     "quality": "reported",
     "raw": "0.188",
     "column": "DATA!F55",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F55. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.495,
     "max": 3.495,
     "quality": "reported",
     "raw": "3.495",
     "column": "DATA!C55",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C55. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J55",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J55. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H55",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H55. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G55",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G55. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F55",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F55. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 506.625,
     "max": 506.625,
     "quality": "reported",
     "raw": "5 atm",
     "column": "Master Sheet!E55",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E55. This is a setting, not a measurement. NASA gives 5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.522,
     "max": 4.522,
     "quality": "reported",
     "raw": "4.522",
     "column": "DATA!B55",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B55. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-15",
     "quality": "reported",
     "raw": "2017-05-15 00:00:00",
     "column": "Master Sheet!B55",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B55. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1260",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1260",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 33,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.519,
     "max": 0.519,
     "quality": "reported",
     "raw": "0.519",
     "column": "DATA!E56",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E56. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.488,
     "max": 0.488,
     "quality": "reported",
     "raw": "0.488",
     "column": "DATA!D56",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D56. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.644,
     "max": 3.644,
     "quality": "reported",
     "raw": "3.644",
     "column": "DATA!C56",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C56. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J56",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J56. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B56",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B56. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Clear fuel and good deployment on fiber. Small disruptions after long ignition time. Luminous flame became dim blue after 8 sec. Flame exhibited large oscillations for a few seconds before extinguishing. After hot flame extinguishes there is a faint image in the color camera and some dim glow of the carbide fiber. Smooth burnout of fuel droplet. Dim glow on fiber gets brighter as droplet gets smaller.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H56",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H56. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G56",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G56. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F56",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F56. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 506.625,
     "max": 506.625,
     "quality": "reported",
     "raw": "5 atm",
     "column": "Master Sheet!E56",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E56. This is a setting, not a measurement. NASA gives 5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.488,
     "max": 4.488,
     "quality": "reported",
     "raw": "4.488",
     "column": "DATA!B56",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B56. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-15",
     "quality": "reported",
     "raw": "2017-05-15 00:00:00",
     "column": "Master Sheet!B56",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B56. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1261",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1261",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 34,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "ambient_temperature_c": {
     "min": 26.97,
     "max": 26.97,
     "quality": "reported",
     "raw": "300.12",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1261_TestSheet.txt, p. 1. NASA gives 300.12 K on the test sheet; 273.15 subtracted.",
     "evidence": "Temperature (K) = \t 300.12",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1261_TestSheet.txt"
    },
    "burning_rate_cool_mm2_s": {
     "min": 0.564,
     "max": 0.564,
     "quality": "reported",
     "raw": "0.564",
     "column": "DATA!E57",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E57. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.618,
     "max": 0.618,
     "quality": "reported",
     "raw": "0.618",
     "column": "DATA!D57",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D57. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burning",
     "column": "Comments!B57",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B57. NASA's comment on this test says a cool flame burned.",
     "evidence": "Very sooty flame initially located very close to the droplet. Lots of disruptions initially, then flame becomes dim blue. Droplet burns w/ hemisperical flame for a short time before extinguishing. Some flame oscillations and then cool flame burning. Very dim oscillating flame visible on color camera. Flame gets a little brighter before burning out.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "description": {
     "text": "Fiber-supported.  Weak hot flame, a lot of sooting, very long and strong cool flame.",
     "quality": "context",
     "raw": "Fiber-supported.  Weak hot flame, a lot of sooting, very long and strong cool flame.",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1261_TestSheet.txt, p. 1. NASA's COMMENTS paragraph on the test sheet, exactly as written.",
     "evidence": "Fiber-supported.  Weak hot flame, a lot of sooting, very long and strong cool flame.",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1261_TestSheet.txt"
    },
    "extinction_diameter_mm": {
     "min": 4.63,
     "max": 4.63,
     "quality": "reported",
     "raw": "4.63",
     "column": "DATA!C57",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C57. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1261_TestSheet.txt, p. 1. NASA's test sheet line \"Fiber:\", Yes or No.",
     "evidence": "Fiber: \tYes",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1261_TestSheet.txt"
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J57",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J57. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B57",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B57. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Very sooty flame initially located very close to the droplet. Lots of disruptions initially, then flame becomes dim blue. Droplet burns w/ hemisperical flame for a short time before extinguishing. Some flame oscillations and then cool flame burning. Very dim oscillating flame visible on color camera. Flame gets a little brighter before burning out.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H57",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H57. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G57",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G57. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F57",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F57. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 506.625,
     "max": 506.625,
     "quality": "reported",
     "raw": "5 atm",
     "column": "Master Sheet!E57",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E57. This is a setting, not a measurement. NASA gives 5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 5.646,
     "max": 5.646,
     "quality": "reported",
     "raw": "5.646",
     "column": "DATA!B57",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B57. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-15",
     "quality": "reported",
     "raw": "2017-05-15 00:00:00",
     "column": "Master Sheet!B57",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B57. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1262",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1262",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 35,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.557,
     "max": 0.557,
     "quality": "reported",
     "raw": "0.557",
     "column": "DATA!E58",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E58. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.659,
     "max": 0.659,
     "quality": "reported",
     "raw": "0.659",
     "column": "DATA!D58",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D58. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "Cool flame burning",
     "column": "Comments!B58",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B58. NASA's comment on this test says a cool flame burned.",
     "evidence": "Increased recording time to ~80 sec. lots of motion on the fiber after deployment and during ignition. Luminous yellow flame with a lot of disruptions right after igniters pull away. Flame becomes dim blue and oscillates a few times before extinguishing. Cool flame burning w/ faint flame present on color camera. Hot flame re-ignited twice, and extinguished. Filter wheel may not hav moved to CF mode.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_mm": {
     "min": 5.225,
     "max": 5.225,
     "quality": "reported",
     "raw": "5.225",
     "column": "DATA!C58",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C58. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J58",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J58. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H58",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H58. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G58",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G58. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F58",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F58. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 506.625,
     "max": 506.625,
     "quality": "reported",
     "raw": "5 atm",
     "column": "Master Sheet!E58",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E58. This is a setting, not a measurement. NASA gives 5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 5.639,
     "max": 5.639,
     "quality": "reported",
     "raw": "5.639",
     "column": "DATA!B58",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B58. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-15",
     "quality": "reported",
     "raw": "2017-05-15 00:00:00",
     "column": "Master Sheet!B58",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B58. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1263",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1263",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 36,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.476,
     "max": 0.476,
     "quality": "reported",
     "raw": "0.476",
     "column": "DATA!E59",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E59. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.421,
     "max": 0.421,
     "quality": "reported",
     "raw": "0.421",
     "column": "DATA!D59",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D59. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B59",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B59. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deployment on fiber with almost no residual motion. Good ignition in ~5 sec. Luminous flame initially quickly after ~7 sec burn time. Vapor cloud starts to appear ~20 sec after ignition. Long cool flame burn w/ no residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_cool_mm": {
     "min": 0.922,
     "max": 0.922,
     "quality": "reported",
     "raw": "0.922",
     "column": "DATA!F59",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F59. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.07,
     "max": 4.07,
     "quality": "reported",
     "raw": "4.07",
     "column": "DATA!C59",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C59. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J59",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J59. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B59",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B59. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment on fiber with almost no residual motion. Good ignition in ~5 sec. Luminous flame initially quickly after ~7 sec burn time. Vapor cloud starts to appear ~20 sec after ignition. Long cool flame burn w/ no residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Master Sheet!H59",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H59. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Master Sheet!G59",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G59. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F59",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F59. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E59",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E59. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.348,
     "max": 4.348,
     "quality": "reported",
     "raw": "4.348",
     "column": "DATA!B59",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B59. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-19",
     "quality": "reported",
     "raw": "2017-05-19 00:00:00",
     "column": "Master Sheet!B59",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B59. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1264",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1264",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 37,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "ambient_temperature_c": {
     "min": 26.85,
     "max": 26.85,
     "quality": "reported",
     "raw": "300.00",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1264_TestSheet.txt, p. 1. NASA gives 300.00 K on the test sheet; 273.15 subtracted.",
     "evidence": "Temperature (K) = \t 300.00",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1264_TestSheet.txt"
    },
    "burning_rate_cool_mm2_s": {
     "min": 0.464,
     "max": 0.464,
     "quality": "reported",
     "raw": "0.464",
     "column": "DATA!E60",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E60. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.426,
     "max": 0.426,
     "quality": "reported",
     "raw": "0.426",
     "column": "DATA!D60",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D60. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B60",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B60. NASA's comment on this test says a cool flame burned.",
     "evidence": "A few bubbles during dispense. Good stretch. Perfect deployment, no residual motion. No ignition-imparted motion. Droplet remained in FOVs for entire burn. Droplet ignites in ~5 sec. Hot flame very luminous initially, burns for ~8 sec. Hot flame becomes dim blue quickly and extinguishes quickly. Long cool flame burn, no residual droplet.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "description": {
     "text": "Free-floated, stays in FOVs of all cameras.  Radiative extinction, cool flame burning and extinction and vapor cloud.",
     "quality": "context",
     "raw": "Free-floated, stays in FOVs of all cameras.  Radiative extinction, cool flame burning and extinction and vapor cloud.",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1264_TestSheet.txt, p. 1. NASA's COMMENTS paragraph on the test sheet, exactly as written.",
     "evidence": "Free-floated, stays in FOVs of all cameras.  Radiative extinction, cool flame burning and extinction and vapor cloud.",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1264_TestSheet.txt"
    },
    "extinction_diameter_cool_mm": {
     "min": 0.974,
     "max": 0.974,
     "quality": "reported",
     "raw": "0.974",
     "column": "DATA!F60",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F60. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.906,
     "max": 3.906,
     "quality": "reported",
     "raw": "3.906",
     "column": "DATA!C60",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C60. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1264_TestSheet.txt, p. 1. NASA's test sheet line \"Fiber:\", Yes or No.",
     "evidence": "Fiber: \tNo",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1264_TestSheet.txt"
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J60",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J60. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B60",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B60. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "A few bubbles during dispense. Good stretch. Perfect deployment, no residual motion. No ignition-imparted motion. Droplet remained in FOVs for entire burn. Droplet ignites in ~5 sec. Hot flame very luminous initially, burns for ~8 sec. Hot flame becomes dim blue quickly and extinguishes quickly. Long cool flame burn, no residual droplet.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Master Sheet!H60",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H60. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Master Sheet!G60",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G60. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F60",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F60. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E60",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E60. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.217,
     "max": 4.217,
     "quality": "reported",
     "raw": "4.217",
     "column": "DATA!B60",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B60. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-19",
     "quality": "reported",
     "raw": "2017-05-19 00:00:00",
     "column": "Master Sheet!B60",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B60. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1265",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1265",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 38,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_mm2_s": {
     "min": 0.539,
     "max": 0.539,
     "quality": "reported",
     "raw": "0.539",
     "column": "DATA!D61",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D61. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.702,
     "max": 3.702,
     "quality": "reported",
     "raw": "3.702",
     "column": "DATA!C61",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C61. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J61",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J61. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B61",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B61. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Some small bubbles during dispense. Good stretch. Slow drift to lower igniter, droplet hit igniter and drifted quickly NW when igniters pulled away. Droplet drifts out of FOV about when hot flame extinguishes. Hot flame burned for ~8 sec and oscillated several times before extinction. Droplet well out of FOV during cool flame burning.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Master Sheet!H61",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H61. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Master Sheet!G61",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G61. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F61",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F61. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E61",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E61. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.139,
     "max": 4.139,
     "quality": "reported",
     "raw": "4.139",
     "column": "DATA!B61",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B61. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-19",
     "quality": "reported",
     "raw": "2017-05-19 00:00:00",
     "column": "Master Sheet!B61",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B61. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1266",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1266",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 39,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.478,
     "max": 0.478,
     "quality": "reported",
     "raw": "0.478",
     "column": "DATA!E62",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E62. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.447,
     "max": 0.447,
     "quality": "reported",
     "raw": "0.447",
     "column": "DATA!D62",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D62. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B62",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B62. NASA's comment on this test says a cool flame burned.",
     "evidence": "Moving back to fiber. Good deployment on fiber with no residual motion. Droplet ignites ~5 sec after deployment. Lumious hot flame becomes dim blue quickly. Hot flame burns for ~7 sec and extinguishes suddenly. Vapor cloud starts to form ~20 sec after ignition. Long cool flame burn and no residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_cool_mm": {
     "min": 0.9,
     "max": 0.9,
     "quality": "reported",
     "raw": "0.9",
     "column": "DATA!F62",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F62. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.936,
     "max": 3.936,
     "quality": "reported",
     "raw": "3.936",
     "column": "DATA!C62",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C62. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J62",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J62. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B62",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B62. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Moving back to fiber. Good deployment on fiber with no residual motion. Droplet ignites ~5 sec after deployment. Lumious hot flame becomes dim blue quickly. Hot flame burns for ~7 sec and extinguishes suddenly. Vapor cloud starts to form ~20 sec after ignition. Long cool flame burn and no residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Master Sheet!H62",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H62. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Master Sheet!G62",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G62. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F62",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F62. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E62",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E62. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.247,
     "max": 4.247,
     "quality": "reported",
     "raw": "4.247",
     "column": "DATA!B62",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B62. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-19",
     "quality": "reported",
     "raw": "2017-05-19 00:00:00",
     "column": "Master Sheet!B62",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B62. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1267",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1267",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 40,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.53,
     "max": 0.53,
     "quality": "reported",
     "raw": "0.53",
     "column": "DATA!E63",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E63. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.43,
     "max": 0.43,
     "quality": "reported",
     "raw": "0.43",
     "column": "DATA!D63",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D63. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.978,
     "max": 3.978,
     "quality": "reported",
     "raw": "3.978",
     "column": "DATA!C63",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C63. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J63",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J63. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B63",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B63. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Skipped F146AQ1 because of common issues. Slight shift to lower igniter on fiber after deployment. Good ignition w/ luminous flame. Soot luminosity disappears in ~4 sec. Hot-flame extinguishes in ~8 sec. Not much motion of droplet on fiber. Faint image present on camera with very dim glow from fiber. Glow disappears 17 sec after ignition. Re-ignition after glow disappears. Oscillating flame extinguishes and re-ignites.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Master Sheet!H63",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H63. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Master Sheet!G63",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G63. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F63",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F63. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E63",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E63. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.312,
     "max": 4.312,
     "quality": "reported",
     "raw": "4.312",
     "column": "DATA!B63",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B63. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-26",
     "quality": "reported",
     "raw": "2017-05-26 00:00:00",
     "column": "Master Sheet!B63",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B63. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1268",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1268",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 41,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "DATA!E64",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E64. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.404,
     "max": 0.404,
     "quality": "reported",
     "raw": "0.404",
     "column": "DATA!D64",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D64. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.012,
     "max": 4.012,
     "quality": "reported",
     "raw": "4.012",
     "column": "DATA!C64",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C64. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J64",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J64. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B64",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B64. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Attempt to free float, lost first droplet to lower needle. Excellent deploymen, slow drift to upper igniter as igniters heat. Ignition in ~6 sec. Luminous hot flame becomes dim blue, oscillates and extinguishes in ~9 sec. Faint oscillating, very dim flame present on color camera. Hot flame re-ignites 16 sec after hot flame extinction. Stays in FOVs beyond re-ignition.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Master Sheet!H64",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H64. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Master Sheet!G64",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G64. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F64",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F64. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E64",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E64. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.345,
     "max": 4.345,
     "quality": "reported",
     "raw": "4.345",
     "column": "DATA!B64",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B64. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-26",
     "quality": "reported",
     "raw": "2017-05-26 00:00:00",
     "column": "Master Sheet!B64",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B64. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1269",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1269",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 42,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J65",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J65. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B65",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B65. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Re-using droplet from last test. Hot flame ignites in ~10 sec. Hot flame brns with luminous flame that becomes dim blue, oscillates and extinguishes in ~7 sec. Faint flame present on color camera. Faint flame burns for ~11 sec before re-igniting to hot flame. Several re-ignitions and oscillations. No vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Master Sheet!H65",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H65. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Master Sheet!G65",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G65. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F65",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F65. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E65",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E65. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-05-26",
     "quality": "reported",
     "raw": "2017-05-26 00:00:00",
     "column": "Master Sheet!B65",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B65. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1270",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1270",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 43,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.438,
     "max": 0.438,
     "quality": "reported",
     "raw": "0.438",
     "column": "DATA!E66",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E66. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.461,
     "max": 0.461,
     "quality": "reported",
     "raw": "0.461",
     "column": "DATA!D66",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D66. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.382,
     "max": 0.382,
     "quality": "reported",
     "raw": "0.382",
     "column": "DATA!F66",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F66. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.954,
     "max": 4.954,
     "quality": "reported",
     "raw": "4.954",
     "column": "DATA!C66",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C66. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J66",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J66. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B66",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B66. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Burning a large droplet. Hot flame ignites in ~8 sec. Not much motion on fiber. Luminous hot flame becomes dim blue. Hot flame oscillates and extinguishes in ~7 sec. Faint flame (~standoff of hot flame) present and appears to oscillate. Faint flame disappears after 11 sec and hot flame re-ignites. Hot flame burning and oscillation, extincion and several re-ignition, extinction cycles.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Master Sheet!H66",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H66. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Master Sheet!G66",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G66. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F66",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F66. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E66",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E66. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 5.185,
     "max": 5.185,
     "quality": "reported",
     "raw": "5.185",
     "column": "DATA!B66",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B66. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-26",
     "quality": "reported",
     "raw": "2017-05-26 00:00:00",
     "column": "Master Sheet!B66",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B66. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1271",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1271",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 44,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.594,
     "max": 0.594,
     "quality": "reported",
     "raw": "0.594",
     "column": "DATA!E67",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E67. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.739,
     "max": 0.739,
     "quality": "reported",
     "raw": "0.739",
     "column": "DATA!D67",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D67. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 2.797,
     "max": 2.797,
     "quality": "reported",
     "raw": "2.797",
     "column": "DATA!F67",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F67. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.105,
     "max": 4.105,
     "quality": "reported",
     "raw": "4.105",
     "column": "DATA!C67",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C67. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J67",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J67. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B67",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B67. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment on fiber, no axial motion. Droplet ignites in ~8 sec. Luminous yellow flame gets dimmer, disappears in ~5 sec. Dim blue flame gradually disappears in ~9 sec. Stable faint image and glow on fiber after hot flame extinguishes. Faint flame gets dimmer and hot flame re-ignites ~26 sec after ignition. Hot flame extinguishes and re-ignites at ~37 sec.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Master Sheet!H67",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H67. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Master Sheet!G67",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G67. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F67",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F67. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 506.625,
     "max": 506.625,
     "quality": "reported",
     "raw": "5 atm",
     "column": "Master Sheet!E67",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E67. This is a setting, not a measurement. NASA gives 5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.627,
     "max": 4.627,
     "quality": "reported",
     "raw": "4.627",
     "column": "DATA!B67",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B67. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-31",
     "quality": "reported",
     "raw": "2017-05-31 00:00:00",
     "column": "Master Sheet!B67",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B67. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1272",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1272",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 45,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.645,
     "max": 0.645,
     "quality": "reported",
     "raw": "0.645",
     "column": "DATA!E68",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E68. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.789,
     "max": 0.789,
     "quality": "reported",
     "raw": "0.789",
     "column": "DATA!D68",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D68. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.353,
     "max": 0.353,
     "quality": "reported",
     "raw": "0.353",
     "column": "DATA!F68",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F68. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.174,
     "max": 4.174,
     "quality": "reported",
     "raw": "4.174",
     "column": "DATA!C68",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C68. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J68",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J68. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Master Sheet!H68",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H68. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Master Sheet!G68",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G68. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F68",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F68. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 506.625,
     "max": 506.625,
     "quality": "reported",
     "raw": "5 atm",
     "column": "Master Sheet!E68",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E68. This is a setting, not a measurement. NASA gives 5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.756,
     "max": 4.756,
     "quality": "reported",
     "raw": "4.756",
     "column": "DATA!B68",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B68. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-31",
     "quality": "reported",
     "raw": "2017-05-31 00:00:00",
     "column": "Master Sheet!B68",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B68. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1273",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1273",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 46,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.806,
     "max": 0.806,
     "quality": "reported",
     "raw": "0.806",
     "column": "DATA!E69",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E69. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "DATA!D69",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D69. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 1.554,
     "max": 1.554,
     "quality": "reported",
     "raw": "1.554",
     "column": "DATA!F69",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F69. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.595,
     "max": 3.595,
     "quality": "reported",
     "raw": "3.595",
     "column": "DATA!C69",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C69. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J69",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J69. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B69",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B69. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Another free deploy attempt. Excellent deployment. Very slow drift to lower igniter during ignition. Droplet hits lower igniter, ignited and continued slow drift. Hot flame extinguishes w/ oscillations. Faint blue flame burns for a short time, then hot flame re-ignites.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Master Sheet!H69",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H69. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Master Sheet!G69",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G69. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F69",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F69. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 506.625,
     "max": 506.625,
     "quality": "reported",
     "raw": "5 atm",
     "column": "Master Sheet!E69",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E69. This is a setting, not a measurement. NASA gives 5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.537,
     "max": 4.537,
     "quality": "reported",
     "raw": "4.537",
     "column": "DATA!B69",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B69. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-31",
     "quality": "reported",
     "raw": "2017-05-31 00:00:00",
     "column": "Master Sheet!B69",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B69. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1274",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1274",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 47,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.515,
     "max": 0.515,
     "quality": "reported",
     "raw": "0.515",
     "column": "DATA!E70",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E70. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.78,
     "max": 0.78,
     "quality": "reported",
     "raw": "0.78",
     "column": "DATA!D70",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D70. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.935,
     "max": 4.935,
     "quality": "reported",
     "raw": "4.935",
     "column": "DATA!C70",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C70. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J70",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J70. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Master Sheet!H70",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H70. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Master Sheet!G70",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G70. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F70",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F70. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 506.625,
     "max": 506.625,
     "quality": "reported",
     "raw": "5 atm",
     "column": "Master Sheet!E70",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E70. This is a setting, not a measurement. NASA gives 5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 5.346,
     "max": 5.346,
     "quality": "reported",
     "raw": "5.346",
     "column": "DATA!B70",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B70. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-05-31",
     "quality": "reported",
     "raw": "2017-05-31 00:00:00",
     "column": "Master Sheet!B70",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B70. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1274A",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1274A",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 48,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.563,
     "max": 0.563,
     "quality": "reported",
     "raw": "0.563",
     "column": "DATA!E71",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E71. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 1.371,
     "max": 1.371,
     "quality": "reported",
     "raw": "1.371",
     "column": "DATA!D71",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D71. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.372,
     "max": 0.372,
     "quality": "reported",
     "raw": "0.372",
     "column": "DATA!F71",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F71. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 5.545,
     "max": 5.545,
     "quality": "reported",
     "raw": "5.545",
     "column": "DATA!C71",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C71. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J71",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J71. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Master Sheet!H71",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H71. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Master Sheet!G71",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G71. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F71",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F71. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 506.625,
     "max": 506.625,
     "quality": "reported",
     "raw": "5 atm",
     "column": "Master Sheet!E71",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E71. This is a setting, not a measurement. NASA gives 5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.67,
     "max": 4.67,
     "quality": "reported",
     "raw": "4.67",
     "column": "DATA!B71",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B71. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-07",
     "quality": "reported",
     "raw": "2017-06-07 00:00:00",
     "column": "Master Sheet!B71",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B71. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1275",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1275",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 49,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.541,
     "max": 0.541,
     "quality": "reported",
     "raw": "0.541",
     "column": "DATA!E72",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E72. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 1.496,
     "max": 1.496,
     "quality": "reported",
     "raw": "1.496",
     "column": "DATA!D72",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D72. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.284,
     "max": 0.284,
     "quality": "reported",
     "raw": "0.284",
     "column": "DATA!F72",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F72. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.993,
     "max": 3.993,
     "quality": "reported",
     "raw": "3.993",
     "column": "DATA!C72",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C72. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J72",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J72. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Master Sheet!H72",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H72. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Master Sheet!G72",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G72. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F72",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F72. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 506.625,
     "max": 506.625,
     "quality": "reported",
     "raw": "5 atm",
     "column": "Master Sheet!E72",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E72. This is a setting, not a measurement. NASA gives 5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.49,
     "max": 4.49,
     "quality": "reported",
     "raw": "4.49",
     "column": "DATA!B72",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B72. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-07",
     "quality": "reported",
     "raw": "2017-06-07 00:00:00",
     "column": "Master Sheet!B72",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B72. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1276",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1276",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 50,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.582,
     "max": 0.582,
     "quality": "reported",
     "raw": "0.582",
     "column": "DATA!E73",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E73. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 1.164,
     "max": 1.164,
     "quality": "reported",
     "raw": "1.164",
     "column": "DATA!D73",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D73. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.241,
     "max": 0.241,
     "quality": "reported",
     "raw": "0.241",
     "column": "DATA!F73",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F73. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.023,
     "max": 4.023,
     "quality": "reported",
     "raw": "4.023",
     "column": "DATA!C73",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C73. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J73",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J73. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B73",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B73. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good fuel dispense, good stretch. Perfecr deployment, almost no drift after deployment or during ignition. Droplet ignites in ~4 sec. Dim flame after hot flame extinction burns and extinguishes ~12 sec after ignition. After dim flame extinguishes re-ignition, cycle begins.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Master Sheet!H73",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H73. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Master Sheet!G73",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G73. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F73",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F73. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 506.625,
     "max": 506.625,
     "quality": "reported",
     "raw": "5 atm",
     "column": "Master Sheet!E73",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E73. This is a setting, not a measurement. NASA gives 5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.539,
     "max": 4.539,
     "quality": "reported",
     "raw": "4.539",
     "column": "DATA!B73",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B73. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-07",
     "quality": "reported",
     "raw": "2017-06-07 00:00:00",
     "column": "Master Sheet!B73",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B73. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1277",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1277",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 51,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.639,
     "max": 0.639,
     "quality": "reported",
     "raw": "0.639",
     "column": "DATA!E74",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E74. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 1.703,
     "max": 1.703,
     "quality": "reported",
     "raw": "1.703",
     "column": "DATA!D74",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D74. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.162,
     "max": 0.162,
     "quality": "reported",
     "raw": "0.162",
     "column": "DATA!F74",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F74. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 5.138,
     "max": 5.138,
     "quality": "reported",
     "raw": "5.138",
     "column": "DATA!C74",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C74. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J74",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J74. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B74",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B74. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Moving to a 5 mm droplet. Lost first droplet to lower needle. Last test because of fuel. Some motion on fiber after deployment. Droplet stablizes during ignition. Droplet ignites in ~7 sec. Luminous flame quickly turns dim blue and extinguishes in ~4 sec. Dim flame w/ noticeable fiber glow burns ~3 sec before extinguishing. Immediately after dim flame extinguishes re-ignition cycle begins. After last re-ignition droplet burns w/ cool flame for ~12 sec.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Master Sheet!H74",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H74. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Master Sheet!G74",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G74. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F74",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F74. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 506.625,
     "max": 506.625,
     "quality": "reported",
     "raw": "5 atm",
     "column": "Master Sheet!E74",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E74. This is a setting, not a measurement. NASA gives 5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 5.338,
     "max": 5.338,
     "quality": "reported",
     "raw": "5.338",
     "column": "DATA!B74",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B74. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-07",
     "quality": "reported",
     "raw": "2017-06-07 00:00:00",
     "column": "Master Sheet!B74",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B74. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1278",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1278",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 52,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.62,
     "max": 0.62,
     "quality": "reported",
     "raw": "0.62",
     "column": "DATA!E75",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E75. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.938,
     "max": 0.938,
     "quality": "reported",
     "raw": "0.938",
     "column": "DATA!D75",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D75. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.699,
     "max": 3.699,
     "quality": "reported",
     "raw": "3.699",
     "column": "DATA!C75",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C75. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J75",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J75. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B75",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B75. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Fuel left the needle and moved to the needle support - lost ~4 mm size droplet (too much stretch?). Dispense fuel again - saw a small bubble. Seems to have dissolved droplet loocked clean before AS. Ignited - but the igniter stays on even after ignition - seems to be [disable?] ignition. Hot-flame disappears almost at igniter withdrawal. Cool flame? Vapor cloud formation. Detect delay - 6000 (may be too high - change to 3000).",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Master Sheet!H75",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H75. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Master Sheet!G75",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G75. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F75",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F75. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E75",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E75. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 3.872,
     "max": 3.872,
     "quality": "reported",
     "raw": "3.872",
     "column": "DATA!B75",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B75. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-09",
     "quality": "reported",
     "raw": "2017-06-09 00:00:00",
     "column": "Master Sheet!B75",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B75. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1279",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1279",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 53,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.716,
     "max": 0.716,
     "quality": "reported",
     "raw": "0.716",
     "column": "DATA!E76",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E76. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 1.141,
     "max": 1.141,
     "quality": "reported",
     "raw": "1.141",
     "column": "DATA!D76",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D76. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.662,
     "max": 3.662,
     "quality": "reported",
     "raw": "3.662",
     "column": "DATA!C76",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C76. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J76",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J76. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Master Sheet!H76",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H76. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Master Sheet!G76",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G76. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F76",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F76. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E76",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E76. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 3.927,
     "max": 3.927,
     "quality": "reported",
     "raw": "3.927",
     "column": "DATA!B76",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B76. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-09",
     "quality": "reported",
     "raw": "2017-06-09 00:00:00",
     "column": "Master Sheet!B76",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B76. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1280",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1280",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 54,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.595,
     "max": 0.595,
     "quality": "reported",
     "raw": "0.595",
     "column": "DATA!E77",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E77. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.714,
     "max": 0.714,
     "quality": "reported",
     "raw": "0.714",
     "column": "DATA!D77",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D77. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.263,
     "max": 0.263,
     "quality": "reported",
     "raw": "0.263",
     "column": "DATA!F77",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F77. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.787,
     "max": 3.787,
     "quality": "reported",
     "raw": "3.787",
     "column": "DATA!C77",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C77. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J77",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J77. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Master Sheet!H77",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H77. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Master Sheet!G77",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G77. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F77",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F77. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E77",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E77. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 3.977,
     "max": 3.977,
     "quality": "reported",
     "raw": "3.977",
     "column": "DATA!B77",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B77. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-09",
     "quality": "reported",
     "raw": "2017-06-09 00:00:00",
     "column": "Master Sheet!B77",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B77. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1281",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1281",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 55,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.531,
     "max": 0.531,
     "quality": "reported",
     "raw": "0.531",
     "column": "DATA!E78",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E78. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.322,
     "max": 0.322,
     "quality": "reported",
     "raw": "0.322",
     "column": "DATA!D78",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D78. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 2.098,
     "max": 2.098,
     "quality": "reported",
     "raw": "2.098",
     "column": "DATA!F78",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F78. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.305,
     "max": 4.305,
     "quality": "reported",
     "raw": "4.305",
     "column": "DATA!C78",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C78. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J78",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J78. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B78",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B78. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Getting bubbles on intial dispense/purge. Bubbles disappeared on deploy/ignite. Hot flame during ignition. Dim blue flame (no soot) appears 6 sec after igniters come on. Flame only exists while igniters are on. Vapor cloud appears ~7 sec after igniters pull away. Vapor cloud grows, gets larger (brighter) and droplet decreases in size. Large residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Master Sheet!H78",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H78. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Master Sheet!G78",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G78. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F78",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F78. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E78",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E78. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.388,
     "max": 4.388,
     "quality": "reported",
     "raw": "4.388",
     "column": "DATA!B78",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B78. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-12",
     "quality": "reported",
     "raw": "2017-06-12 00:00:00",
     "column": "Master Sheet!B78",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B78. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1282",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1282",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 56,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.546,
     "max": 0.546,
     "quality": "reported",
     "raw": "0.546",
     "column": "DATA!E79",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E79. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.339,
     "max": 0.339,
     "quality": "reported",
     "raw": "0.339",
     "column": "DATA!D79",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D79. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B79",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B79. NASA's comment on this test says a cool flame burned.",
     "evidence": "Large residual droplet from last test on fiber. Moved droplet down fiber to clean fiber a little. Left droplet far away from test site on fiber. A lot of oscillations on fiber likely because of bubbling. Hot flame ignition in ~10 sec. Luminous yellow flame burns for ~3 sec becomes dim blue and suddenly extinguishes. Long cool flame burn with huge vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_cool_mm": {
     "min": 2.536,
     "max": 2.536,
     "quality": "reported",
     "raw": "2.536",
     "column": "DATA!F79",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F79. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 5.954,
     "max": 5.954,
     "quality": "reported",
     "raw": "5.954",
     "column": "DATA!C79",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C79. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J79",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J79. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B79",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B79. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Large residual droplet from last test on fiber. Moved droplet down fiber to clean fiber a little. Left droplet far away from test site on fiber. A lot of oscillations on fiber likely because of bubbling. Hot flame ignition in ~10 sec. Luminous yellow flame burns for ~3 sec becomes dim blue and suddenly extinguishes. Long cool flame burn with huge vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Master Sheet!H79",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H79. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Master Sheet!G79",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G79. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F79",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F79. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E79",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E79. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 6.014,
     "max": 6.014,
     "quality": "reported",
     "raw": "6.014",
     "column": "DATA!B79",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B79. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-12",
     "quality": "reported",
     "raw": "2017-06-12 00:00:00",
     "column": "Master Sheet!B79",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B79. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1283",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1283",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 57,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J80",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J80. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B80",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B80. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment. Started to drift to upper igniter during. Droplet hit upper, igniter, drifted to lower igniter, hit (didn't ignite) drifted, back to upper igniter, hit (still didn't ignite), drifted to lower igniter and ignited. Droplet drifted quickly 5 in color camera and left FOV ~5 sec after igniter withdraw. Hot flame burned for ~3 sec and abruptly extinguished.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Master Sheet!H80",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H80. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Master Sheet!G80",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G80. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F80",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F80. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E80",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E80. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-06-12",
     "quality": "reported",
     "raw": "2017-06-12 00:00:00",
     "column": "Master Sheet!B80",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B80. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1284",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1284",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 58,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.53,
     "max": 0.53,
     "quality": "reported",
     "raw": "0.53",
     "column": "DATA!E81",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E81. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.293,
     "max": 0.293,
     "quality": "reported",
     "raw": "0.293",
     "column": "DATA!D81",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D81. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B81",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B81. NASA's comment on this test says a cool flame burned.",
     "evidence": "Residual drop still on fiber. Dragged it down fiber to combine with other drop. Dispensed last fuel droplet. Excellent deployment with no motion on fiber. Ignition w/ luminous yellow flame in ~10 sec. Luminous flame grows, becomes blue and extinguishes in ~3 sec abruptly. Long cool flame burn with huge vapor cloud. Vapor cloud starts to form ~10 sec after flame extinction.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_cool_mm": {
     "min": 2.57,
     "max": 2.57,
     "quality": "reported",
     "raw": "2.57",
     "column": "DATA!F81",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F81. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 6.013,
     "max": 6.013,
     "quality": "reported",
     "raw": "6.013",
     "column": "DATA!C81",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C81. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "C12H26",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Master Sheet!J81",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J81. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B81",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B81. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Residual drop still on fiber. Dragged it down fiber to combine with other drop. Dispensed last fuel droplet. Excellent deployment with no motion on fiber. Ignition w/ luminous yellow flame in ~10 sec. Luminous flame grows, becomes blue and extinguishes in ~3 sec abruptly. Long cool flame burn with huge vapor cloud. Vapor cloud starts to form ~10 sec after flame extinction.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Master Sheet!H81",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H81. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Master Sheet!G81",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G81. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F81",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F81. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E81",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E81. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 6.094,
     "max": 6.094,
     "quality": "reported",
     "raw": "6.094",
     "column": "DATA!B81",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B81. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-12",
     "quality": "reported",
     "raw": "2017-06-12 00:00:00",
     "column": "Master Sheet!B81",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B81. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1298",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1298",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 59,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.364,
     "max": 0.364,
     "quality": "reported",
     "raw": "0.364",
     "column": "DATA!E95",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E95. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.309,
     "max": 0.309,
     "quality": "reported",
     "raw": "0.309",
     "column": "DATA!D95",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D95. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "DATA!F95",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F95. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.931,
     "max": 3.931,
     "quality": "reported",
     "raw": "3.931",
     "column": "DATA!C95",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C95. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J95",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J95. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B95",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B95. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Moved igniter 100 [cnts?] away from droplet. Near perfect deployment and ignition. Slow drift S after igniter withdraw. Good ignition in ~5 sec. Luminous flame turns dim blue in ~3 sec and extinguishes w/out oscillations in ~10 sec. Vapor cloud starts to form ~20 sec after hot-flame extinction. Large vapor cloud and no apparent residual droplet after test.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H95",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H95. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G95",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G95. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F95",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F95. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E95",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E95. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.2,
     "max": 4.2,
     "quality": "reported",
     "raw": "4.2",
     "column": "DATA!B95",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B95. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-28",
     "quality": "reported",
     "raw": "2017-06-28 00:00:00",
     "column": "Master Sheet!B95",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B95. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1299",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1299",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 60,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.357,
     "max": 0.357,
     "quality": "reported",
     "raw": "0.357",
     "column": "DATA!E96",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E96. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.294,
     "max": 0.294,
     "quality": "reported",
     "raw": "0.294",
     "column": "DATA!D96",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D96. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B96",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B96. NASA's comment on this test says a cool flame burned.",
     "evidence": "Moved lower igniter 50 [cnts?] away from droplet. Good stretch, no bubbles. Good ignition with luminous yellow flame in ~4 sec. Luminous yellow flame becomes dim blue in ~3 sec, extinguishes w/out oscillations in ~8 sec. Droplet drifts SE and out of FOV about half way through cool flame burn. Very small extinction (cool-flame) droplet diameter.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_mm": {
     "min": 3.977,
     "max": 3.977,
     "quality": "reported",
     "raw": "3.977",
     "column": "DATA!C96",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C96. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J96",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J96. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B96",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B96. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Moved lower igniter 50 [cnts?] away from droplet. Good stretch, no bubbles. Good ignition with luminous yellow flame in ~4 sec. Luminous yellow flame becomes dim blue in ~3 sec, extinguishes w/out oscillations in ~8 sec. Droplet drifts SE and out of FOV about half way through cool flame burn. Very small extinction (cool-flame) droplet diameter.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H96",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H96. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G96",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G96. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F96",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F96. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E96",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E96. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.249,
     "max": 4.249,
     "quality": "reported",
     "raw": "4.249",
     "column": "DATA!B96",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B96. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-28",
     "quality": "reported",
     "raw": "2017-06-28 00:00:00",
     "column": "Master Sheet!B96",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B96. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1302",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1302",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 61,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.333,
     "max": 0.333,
     "quality": "reported",
     "raw": "0.333",
     "column": "DATA!E99",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E99. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.348,
     "max": 0.348,
     "quality": "reported",
     "raw": "0.348",
     "column": "DATA!D99",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D99. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B99",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B99. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deployment with slow drift S when igniters come on. Ignition in ~5 sec w/ continued drift S. Luminous yellow flame disappears in ~4 sec and extinguishes in ~9 sec. droplet continues drift S and leaves HiBMS FOV before cool flame extinction. Vapor cloud forms ~17 sec after hot-flame extinction. Long cool flame burn with no visible residual droplet.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_cool_mm": {
     "min": 0.87,
     "max": 0.87,
     "quality": "reported",
     "raw": "0.87",
     "column": "DATA!F99",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F99. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "4",
     "column": "DATA!C99",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C99. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.60]/[.40] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Master Sheet!J99",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J99. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B99",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B99. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment with slow drift S when igniters come on. Ignition in ~5 sec w/ continued drift S. Luminous yellow flame disappears in ~4 sec and extinguishes in ~9 sec. droplet continues drift S and leaves HiBMS FOV before cool flame extinction. Vapor cloud forms ~17 sec after hot-flame extinction. Long cool flame burn with no visible residual droplet.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H99",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H99. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G99",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G99. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F99",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F99. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E99",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E99. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.218,
     "max": 4.218,
     "quality": "reported",
     "raw": "4.218",
     "column": "DATA!B99",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B99. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-29",
     "quality": "reported",
     "raw": "2017-06-29 00:00:00",
     "column": "Master Sheet!B99",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B99. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1303",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1303",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 62,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "[.60]/[.40] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Master Sheet!J100",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J100. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B100",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B100. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Perfect deployment and ignition. Droplet gets slow drift W and eventually drifts to edge of FOV but we captured most of test. Ignition w/ luminous yellow flame in ~7 sec. Flame becomes dim blue in ~4 sec and extinguishes in ~8 sec. Vapor cloud formation at ~18 after extinction. Either a very slow cool flame burn or very large cool flame extinction diameter.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H100",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H100. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G100",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G100. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F100",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F100. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E100",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E100. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-06-29",
     "quality": "reported",
     "raw": "2017-06-29 00:00:00",
     "column": "Master Sheet!B100",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B100. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1304",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1304",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 63,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "[.60]/[.40] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Master Sheet!J101",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J101. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B101",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B101. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Perfect deployment. Slow drift W during ignition but likely stays in FOV. Ignition w/ luminous flame in ~6 sec. Flame becomes dim blue in ~5 sec and extinguishes in ~9 sec. Vapor cloud forms ~17 sec after extinction. Cool flame burns with no residual droplet visible.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H101",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H101. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G101",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G101. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F101",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F101. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E101",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E101. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-06-29",
     "quality": "reported",
     "raw": "2017-06-29 00:00:00",
     "column": "Master Sheet!B101",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B101. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1305",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1305",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 64,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.376,
     "max": 0.376,
     "quality": "reported",
     "raw": "0.376",
     "column": "DATA!E102",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E102. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.337,
     "max": 0.337,
     "quality": "reported",
     "raw": "0.337",
     "column": "DATA!D102",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D102. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.518,
     "max": 0.518,
     "quality": "reported",
     "raw": "0.518",
     "column": "DATA!F102",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F102. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.805,
     "max": 3.805,
     "quality": "reported",
     "raw": "3.805",
     "column": "DATA!C102",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C102. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J102",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J102. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B102",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B102. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Getting some bubbles on initial dispense. Good deployment on fiber, only minor (low freq.) movement. Good ignition in ~6 sec with luminous yellow flame. Flame becomes dim blue in ~5 sec and extinguishing in ~10 sec. Evidence of more soot formation w/ aggregate on fiber. Vapor cloud starts forming in ~17 sec. No residual droplet on fiber after test.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H102",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H102. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G102",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G102. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F102",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F102. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 126.65625,
     "max": 126.65625,
     "quality": "reported",
     "raw": "1.25 atm",
     "column": "Master Sheet!E102",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E102. This is a setting, not a measurement. NASA gives 1.25 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.063,
     "max": 4.063,
     "quality": "reported",
     "raw": "4.063",
     "column": "DATA!B102",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B102. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-03",
     "quality": "reported",
     "raw": "2017-07-03 00:00:00",
     "column": "Master Sheet!B102",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B102. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1306",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1306",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 65,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B103",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B103. NASA's comment on this test says a cool flame burned.",
     "evidence": "Moved to new position on fiber because of soot. Filter did not move to cool flame, intensifier did change. Good deployment on fiber w. minimal motion. Good ignition w/ luminous yellow flame in ~8 sec. Flame becomes dim blue in ~3 sec, and extinguishes in ~8 sec. Vapor cloud starts ~20 sec after extinction. Very slow cool flame burn with no residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J103",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J103. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B103",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B103. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Moved to new position on fiber because of soot. Filter did not move to cool flame, intensifier did change. Good deployment on fiber w. minimal motion. Good ignition w/ luminous yellow flame in ~8 sec. Flame becomes dim blue in ~3 sec, and extinguishes in ~8 sec. Vapor cloud starts ~20 sec after extinction. Very slow cool flame burn with no residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H103",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H103. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G103",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G103. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F103",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F103. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 126.65625,
     "max": 126.65625,
     "quality": "reported",
     "raw": "1.25 atm",
     "column": "Master Sheet!E103",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E103. This is a setting, not a measurement. NASA gives 1.25 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-07-03",
     "quality": "reported",
     "raw": "2017-07-03 00:00:00",
     "column": "Master Sheet!B103",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B103. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1307",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1307",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 66,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.386,
     "max": 0.386,
     "quality": "reported",
     "raw": "0.386",
     "column": "DATA!E104",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E104. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.356,
     "max": 0.356,
     "quality": "reported",
     "raw": "0.356",
     "column": "DATA!D104",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D104. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 2.685,
     "max": 2.685,
     "quality": "reported",
     "raw": "2.685",
     "column": "DATA!F104",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F104. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.023,
     "max": 4.023,
     "quality": "reported",
     "raw": "4.023",
     "column": "DATA!C104",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C104. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J104",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J104. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B104",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B104. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Moved lower igniter 50 [cts?] away from droplet. Good deployment, but slow drift to lower igniter during ignition. Drift continues SE after igniters pull away. Results identical to last test. Same drift, same time in FOV, same burning characteristics.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H104",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H104. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G104",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G104. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F104",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F104. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 126.65625,
     "max": 126.65625,
     "quality": "reported",
     "raw": "1.25 atm",
     "column": "Master Sheet!E104",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E104. This is a setting, not a measurement. NASA gives 1.25 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.283,
     "max": 4.283,
     "quality": "reported",
     "raw": "4.283",
     "column": "DATA!B104",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B104. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-03",
     "quality": "reported",
     "raw": "2017-07-03 00:00:00",
     "column": "Master Sheet!B104",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B104. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1308",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1308",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 67,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.398,
     "max": 0.398,
     "quality": "reported",
     "raw": "0.398",
     "column": "DATA!E105",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E105. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.268,
     "max": 0.268,
     "quality": "reported",
     "raw": "0.268",
     "column": "DATA!D105",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D105. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 2.28,
     "max": 2.28,
     "quality": "reported",
     "raw": "2.28",
     "column": "DATA!F105",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F105. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 5.111,
     "max": 5.111,
     "quality": "reported",
     "raw": "5.111",
     "column": "DATA!C105",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C105. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J105",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J105. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B105",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B105. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Getting a lot of ~1 Hz vibrations during dispense. Vibrations caused loss of first droplet. Still a lot of vibrations. Good deployment, but slow drift SE to lower igniter during ignition. Droplet hits lower igniter, then starts slow drift NW. Stayed in FOV for large part of test. Results similar to previous test.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H105",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H105. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G105",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G105. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F105",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F105. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 126.65625,
     "max": 126.65625,
     "quality": "reported",
     "raw": "1.25 atm",
     "column": "Master Sheet!E105",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E105. This is a setting, not a measurement. NASA gives 1.25 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 5.27,
     "max": 5.27,
     "quality": "reported",
     "raw": "5.27",
     "column": "DATA!B105",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B105. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-03",
     "quality": "reported",
     "raw": "2017-07-03 00:00:00",
     "column": "Master Sheet!B105",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B105. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1309",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1309",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 68,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.363,
     "max": 0.363,
     "quality": "reported",
     "raw": "0.363",
     "column": "DATA!E106",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E106. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.158,
     "max": 0.158,
     "quality": "reported",
     "raw": "0.158",
     "column": "DATA!D106",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D106. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B106",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B106. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deployment on fiber. Good ignition w/ smal 1 [Hz?] oscillations. Good ignition in ~8 sec. Luminous yellow flame becomes dim blue in ~3 sec and extinguishes in ~7 sec. Vapor cloud starts forming ~19 sec after extinction. Long cool flame burn w/ low burning rate and no residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_mm": {
     "min": 5.579,
     "max": 5.579,
     "quality": "reported",
     "raw": "5.579",
     "column": "DATA!C106",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C106. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J106",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J106. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B106",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B106. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment on fiber. Good ignition w/ smal 1 [Hz?] oscillations. Good ignition in ~8 sec. Luminous yellow flame becomes dim blue in ~3 sec and extinguishes in ~7 sec. Vapor cloud starts forming ~19 sec after extinction. Long cool flame burn w/ low burning rate and no residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H106",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H106. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G106",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G106. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F106",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F106. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 126.65625,
     "max": 126.65625,
     "quality": "reported",
     "raw": "1.25 atm",
     "column": "Master Sheet!E106",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E106. This is a setting, not a measurement. NASA gives 1.25 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 5.634,
     "max": 5.634,
     "quality": "reported",
     "raw": "5.634",
     "column": "DATA!B106",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B106. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-03",
     "quality": "reported",
     "raw": "2017-07-03 00:00:00",
     "column": "Master Sheet!B106",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B106. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1315",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1315",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 69,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.414,
     "max": 0.414,
     "quality": "reported",
     "raw": "0.414",
     "column": "DATA!E112",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E112. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.317,
     "max": 0.317,
     "quality": "reported",
     "raw": "0.317",
     "column": "DATA!D112",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D112. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_mm": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "4",
     "column": "DATA!C112",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C112. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J112",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J112. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B112",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B112. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "No bubbles in fuel, and good deployment on fiber. Good ignition w. luminous flame in ~7 sec. Luminous flame becomes dim blue after ~5 sec. Some deflection of fiber, probably from thermal expansion moves droplet a little. Flame oscillates and extinguishes in ~10 sec. Vapor cloud starts to form ~21 sec after extinction. Large re-ignition ~32 sec after extinction. Droplet continues to burn to completion w/ hot flame.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H112",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H112. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G112",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G112. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F112",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F112. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 202.65,
     "max": 202.65,
     "quality": "reported",
     "raw": "2 atm",
     "column": "Master Sheet!E112",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E112. This is a setting, not a measurement. NASA gives 2 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.248,
     "max": 4.248,
     "quality": "reported",
     "raw": "4.248",
     "column": "DATA!B112",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B112. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-07",
     "quality": "reported",
     "raw": "2017-07-07 00:00:00",
     "column": "Master Sheet!B112",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B112. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1316",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1316",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 70,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.382,
     "max": 0.382,
     "quality": "reported",
     "raw": "0.382",
     "column": "DATA!E113",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E113. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.23,
     "max": 0.23,
     "quality": "reported",
     "raw": "0.23",
     "column": "DATA!D113",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D113. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B113",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B113. NASA's comment on this test says a cool flame burned.",
     "evidence": "Moved to new spot on fiber because of soot. Good deployment on fiber w/ ignition in ~9 sec. Luminous yellow flame turns dim blue, oscillates and extinguishes in ~8 sec. Vapor cloud starts to form ~22 sec after hot-flame extinction. Very long, slow cool flame burn. Droplet disappears ~75 sec after extinction. No re-ignition and no residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_cool_mm": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "DATA!F113",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F113. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 5.307,
     "max": 5.307,
     "quality": "reported",
     "raw": "5.307",
     "column": "DATA!C113",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C113. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J113",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J113. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B113",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B113. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Moved to new spot on fiber because of soot. Good deployment on fiber w/ ignition in ~9 sec. Luminous yellow flame turns dim blue, oscillates and extinguishes in ~8 sec. Vapor cloud starts to form ~22 sec after hot-flame extinction. Very long, slow cool flame burn. Droplet disappears ~75 sec after extinction. No re-ignition and no residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H113",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H113. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G113",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G113. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F113",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F113. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 202.65,
     "max": 202.65,
     "quality": "reported",
     "raw": "2 atm",
     "column": "Master Sheet!E113",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E113. This is a setting, not a measurement. NASA gives 2 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 5.391,
     "max": 5.391,
     "quality": "reported",
     "raw": "5.391",
     "column": "DATA!B113",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B113. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-07",
     "quality": "reported",
     "raw": "2017-07-07 00:00:00",
     "column": "Master Sheet!B113",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B113. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1317",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1317",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 71,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.438,
     "max": 0.438,
     "quality": "reported",
     "raw": "0.438",
     "column": "DATA!E114",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E114. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.41,
     "max": 0.41,
     "quality": "reported",
     "raw": "0.41",
     "column": "DATA!D114",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D114. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burning",
     "column": "Comments!B114",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B114. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deploy, but slow drift to lower igniter during ignition. Droplet continues to drift SE after ignition. Droplet drifts out of HiBMS FOV part way through cool flame burning. Significant pre-extinction flame oscillations. Large vapor cloud and no re-ignition.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_mm": {
     "min": 3.716,
     "max": 3.716,
     "quality": "reported",
     "raw": "3.716",
     "column": "DATA!C114",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C114. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J114",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J114. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B114",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B114. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deploy, but slow drift to lower igniter during ignition. Droplet continues to drift SE after ignition. Droplet drifts out of HiBMS FOV part way through cool flame burning. Significant pre-extinction flame oscillations. Large vapor cloud and no re-ignition.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H114",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H114. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G114",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G114. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F114",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F114. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 202.65,
     "max": 202.65,
     "quality": "reported",
     "raw": "2 atm",
     "column": "Master Sheet!E114",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E114. This is a setting, not a measurement. NASA gives 2 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.232,
     "max": 4.232,
     "quality": "reported",
     "raw": "4.232",
     "column": "DATA!B114",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B114. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-07",
     "quality": "reported",
     "raw": "2017-07-07 00:00:00",
     "column": "Master Sheet!B114",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B114. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1318",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1318",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 72,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "DATA!E115",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E115. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.332,
     "max": 0.332,
     "quality": "reported",
     "raw": "0.332",
     "column": "DATA!D115",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D115. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.952,
     "max": 3.952,
     "quality": "reported",
     "raw": "3.952",
     "column": "DATA!C115",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C115. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J115",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J115. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B115",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B115. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Droplet drifted to upper igniter on fiber and stopped. Good ignition. Results almost identical to FLEX-1315. Large r-ignition of a small droplet size and subsequent burning to completion with hot flame.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H115",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H115. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G115",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G115. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F115",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F115. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 202.65,
     "max": 202.65,
     "quality": "reported",
     "raw": "2 atm",
     "column": "Master Sheet!E115",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E115. This is a setting, not a measurement. NASA gives 2 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.305,
     "max": 4.305,
     "quality": "reported",
     "raw": "4.305",
     "column": "DATA!B115",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B115. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-07",
     "quality": "reported",
     "raw": "2017-07-07 00:00:00",
     "column": "Master Sheet!B115",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B115. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1319",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1319",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 73,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.378,
     "max": 0.378,
     "quality": "reported",
     "raw": "0.378",
     "column": "DATA!E116",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E116. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.134,
     "max": 0.134,
     "quality": "reported",
     "raw": "0.134",
     "column": "DATA!D116",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D116. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B116",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B116. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deployment on fiber. Seems to be some droplet motion (transverse) imparted by the expansion/contraction of the fiber. Fiber and flame oscillate before hot flame extinction. Long cool flame burn, large vapor cloud and no residual droplet. Results almost identical to FLEX-1316.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_mm": {
     "min": 5.297,
     "max": 5.297,
     "quality": "reported",
     "raw": "5.297",
     "column": "DATA!C116",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C116. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J116",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J116. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B116",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B116. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment on fiber. Seems to be some droplet motion (transverse) imparted by the expansion/contraction of the fiber. Fiber and flame oscillate before hot flame extinction. Long cool flame burn, large vapor cloud and no residual droplet. Results almost identical to FLEX-1316.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H116",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H116. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G116",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G116. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F116",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F116. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 202.65,
     "max": 202.65,
     "quality": "reported",
     "raw": "2 atm",
     "column": "Master Sheet!E116",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E116. This is a setting, not a measurement. NASA gives 2 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 5.509,
     "max": 5.509,
     "quality": "reported",
     "raw": "5.509",
     "column": "DATA!B116",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B116. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-07",
     "quality": "reported",
     "raw": "2017-07-07 00:00:00",
     "column": "Master Sheet!B116",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B116. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1324",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1324",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 74,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.383,
     "max": 0.383,
     "quality": "reported",
     "raw": "0.383",
     "column": "DATA!E121",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E121. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.097,
     "max": 0.097,
     "quality": "reported",
     "raw": "0.097",
     "column": "DATA!D121",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D121. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.189,
     "max": 4.189,
     "quality": "reported",
     "raw": "4.189",
     "column": "DATA!C121",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C121. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J121",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J121. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B121",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B121. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Drop from last test on the back of the igniter. Getting a new spot on fiber. Some motion on fiber but droplet stabilizes. Ignition in ~7 sec. Luminous hot flame becomes dim blue and extinguishes in ~5 sec. First re-ignition ~6 sec after hot-flame extinction. Vapor cloud starts to form ~20 sec after first re-ignition, then second re-ignition ~17 sec later. CF gain to wrong value.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H121",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H121. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Master Sheet!G121",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G121. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Master Sheet!F121",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F121. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E121",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E121. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.316,
     "max": 4.316,
     "quality": "reported",
     "raw": "4.316",
     "column": "DATA!B121",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B121. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-12",
     "quality": "reported",
     "raw": "2017-07-12 00:00:00",
     "column": "Master Sheet!B121",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B121. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1325",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1325",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 75,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.354,
     "max": 0.354,
     "quality": "reported",
     "raw": "0.354",
     "column": "DATA!E122",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E122. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.012,
     "max": 0.012,
     "quality": "reported",
     "raw": "0.012",
     "column": "DATA!D122",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D122. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B122",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B122. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deployment on fiber. Ignition in ~10 sec. Luminous flame quickly becomes dim blue and extinguishes in ~5 sec. Very long, very slow cool flame burn. Vapor cloud formation ~20 sec after hot-flame extinction. No re-ignition.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_mm": {
     "min": 5.254,
     "max": 5.254,
     "quality": "reported",
     "raw": "5.254",
     "column": "DATA!C122",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C122. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J122",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J122. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H122",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H122. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Master Sheet!G122",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G122. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Master Sheet!F122",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F122. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E122",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E122. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 5.227,
     "max": 5.227,
     "quality": "reported",
     "raw": "5.227",
     "column": "DATA!B122",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B122. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-12",
     "quality": "reported",
     "raw": "2017-07-12 00:00:00",
     "column": "Master Sheet!B122",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B122. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1326",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1326",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 76,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.408,
     "max": 0.408,
     "quality": "reported",
     "raw": "0.408",
     "column": "DATA!E123",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E123. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.09,
     "max": 0.09,
     "quality": "reported",
     "raw": "0.09",
     "column": "DATA!D123",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D123. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.069,
     "max": 4.069,
     "quality": "reported",
     "raw": "4.069",
     "column": "DATA!C123",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C123. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J123",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J123. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B123",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B123. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment on fiber. Good ignition in ~8 sec. Luminous yellow flame quickly (~2 sec) turns dim blue and extinguishes in ~6 sec. First re-ignition ~9 sec after hot-flame extinction. Second re-ignition ~10 sec later. Residual droplet burns to completion with cool flame.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H123",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H123. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Master Sheet!G123",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G123. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Master Sheet!F123",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F123. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E123",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E123. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.184,
     "max": 4.184,
     "quality": "reported",
     "raw": "4.184",
     "column": "DATA!B123",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B123. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-12",
     "quality": "reported",
     "raw": "2017-07-12 00:00:00",
     "column": "Master Sheet!B123",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B123. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1327",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1327",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 77,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.332,
     "max": 0.332,
     "quality": "reported",
     "raw": "0.332",
     "column": "DATA!E124",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E124. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.085,
     "max": 0.085,
     "quality": "reported",
     "raw": "0.085",
     "column": "DATA!D124",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D124. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B124",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B124. NASA's comment on this test says a cool flame burned.",
     "evidence": "Attempting to re-ignite residual droplet. No fuel dispensed. Bubble in droplet? Droplet still ~5 mm. Good deployment and ignition. Luminous flame becomes dim blue and extinguishes quickly. Long cool flame burn with large vapor cloud and no re-ignition.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_mm": {
     "min": 5.341,
     "max": 5.341,
     "quality": "reported",
     "raw": "5.341",
     "column": "DATA!C124",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C124. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J124",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J124. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B124",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B124. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Attempting to re-ignite residual droplet. No fuel dispensed. Bubble in droplet? Droplet still ~5 mm. Good deployment and ignition. Luminous flame becomes dim blue and extinguishes quickly. Long cool flame burn with large vapor cloud and no re-ignition.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H124",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H124. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Master Sheet!G124",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G124. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Master Sheet!F124",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F124. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E124",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E124. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 5.308,
     "max": 5.308,
     "quality": "reported",
     "raw": "5.308",
     "column": "DATA!B124",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B124. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-12",
     "quality": "reported",
     "raw": "2017-07-12 00:00:00",
     "column": "Master Sheet!B124",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B124. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1333",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1333",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 78,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "DATA!E130",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E130. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.327,
     "max": 0.327,
     "quality": "reported",
     "raw": "0.327",
     "column": "DATA!D130",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D130. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B130",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B130. NASA's comment on this test says a cool flame burned.",
     "evidence": "Re-use droplet from last test. Pulsing igniters from last test to burn of fuel. Pulsing igniters leads to small flame on upper igniter. Moved fiber and powered igniter w/ fan on to burn/vaporize off fuel. Lost droplet on fiber. Lost first drolet to lower needle. Good droplet burn. More soot luminosity and a lot of oscilations, burns for 12 sec. Long cool flame burn, but no re-ignition. No vapor cloud. Faint image on color camera during cool flame burn.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_mm": {
     "min": 3.745,
     "max": 3.745,
     "quality": "reported",
     "raw": "3.745",
     "column": "DATA!C130",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C130. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J130",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J130. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B130",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B130. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Re-use droplet from last test. Pulsing igniters from last test to burn of fuel. Pulsing igniters leads to small flame on upper igniter. Moved fiber and powered igniter w/ fan on to burn/vaporize off fuel. Lost droplet on fiber. Lost first drolet to lower needle. Good droplet burn. More soot luminosity and a lot of oscilations, burns for 12 sec. Long cool flame burn, but no re-ignition. No vapor cloud. Faint image on color camera during cool flame burn.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H130",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H130. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G130",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G130. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F130",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F130. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E130",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E130. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.106,
     "max": 4.106,
     "quality": "reported",
     "raw": "4.106",
     "column": "DATA!B130",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B130. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-17",
     "quality": "reported",
     "raw": "2017-07-17 00:00:00",
     "column": "Master Sheet!B130",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B130. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1334",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1334",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 79,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.365,
     "max": 0.365,
     "quality": "reported",
     "raw": "0.365",
     "column": "DATA!E131",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E131. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.115,
     "max": 0.115,
     "quality": "reported",
     "raw": "0.115",
     "column": "DATA!D131",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D131. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_mm": {
     "min": 5.235,
     "max": 5.235,
     "quality": "reported",
     "raw": "5.235",
     "column": "DATA!C131",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C131. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J131",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J131. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B131",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B131. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment on fiber. Lost droplet to igniter. A lot of fuel on lower igniter. Try again after LOS. Good deployment on fiber, good position. Good ignition, some soot luminosity, oscillations before extinction. Ignition in 6 sec, extinction at 9 sec. First re-ignition ~19 sec after extinction. 2 re-ignition ~+5 sec. 3 re-ignition ~+5 sec. 4 re-ignition ~+5 sec. 5 re-ignition ~+10 sec. 6 re-ignition +5 sec. Burnout ~+10 sec.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H131",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H131. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G131",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G131. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F131",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F131. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E131",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E131. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 5.289,
     "max": 5.289,
     "quality": "reported",
     "raw": "5.289",
     "column": "DATA!B131",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B131. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-17",
     "quality": "reported",
     "raw": "2017-07-17 00:00:00",
     "column": "Master Sheet!B131",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B131. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1339",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1339",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 80,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.534,
     "max": 0.534,
     "quality": "reported",
     "raw": "0.534",
     "column": "DATA!E136",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E136. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.648,
     "max": 0.648,
     "quality": "reported",
     "raw": "0.648",
     "column": "DATA!D136",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D136. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.322,
     "max": 3.322,
     "quality": "reported",
     "raw": "3.322",
     "column": "DATA!C136",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C136. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J136",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J136. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H136",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H136. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G136",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G136. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F136",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F136. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 506.625,
     "max": 506.625,
     "quality": "reported",
     "raw": "5 atm",
     "column": "Master Sheet!E136",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E136. This is a setting, not a measurement. NASA gives 5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.439,
     "max": 4.439,
     "quality": "reported",
     "raw": "4.439",
     "column": "DATA!B136",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B136. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-21",
     "quality": "reported",
     "raw": "2017-07-21 00:00:00",
     "column": "Master Sheet!B136",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B136. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1343",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1343",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 81,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.337,
     "max": 0.337,
     "quality": "reported",
     "raw": "0.337",
     "column": "DATA!E140",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E140. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.289,
     "max": 0.289,
     "quality": "reported",
     "raw": "0.289",
     "column": "DATA!D140",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D140. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.482,
     "max": 0.482,
     "quality": "reported",
     "raw": "0.482",
     "column": "DATA!F140",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F140. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.226,
     "max": 4.226,
     "quality": "reported",
     "raw": "4.226",
     "column": "DATA!C140",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C140. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J140",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J140. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H140",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H140. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G140",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G140. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F140",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F140. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 75.99375,
     "max": 75.99375,
     "quality": "reported",
     "raw": "0.75 atm",
     "column": "Master Sheet!E140",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E140. This is a setting, not a measurement. NASA gives 0.75 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.504,
     "max": 4.504,
     "quality": "reported",
     "raw": "4.504",
     "column": "DATA!B140",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B140. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-26",
     "quality": "reported",
     "raw": "2017-07-26 00:00:00",
     "column": "Master Sheet!B140",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B140. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1344",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1344",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 82,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.336,
     "max": 0.336,
     "quality": "reported",
     "raw": "0.336",
     "column": "DATA!E141",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E141. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.302,
     "max": 0.302,
     "quality": "reported",
     "raw": "0.302",
     "column": "DATA!D141",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D141. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.902,
     "max": 0.902,
     "quality": "reported",
     "raw": "0.902",
     "column": "DATA!F141",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F141. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.952,
     "max": 3.952,
     "quality": "reported",
     "raw": "3.952",
     "column": "DATA!C141",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C141. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J141",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J141. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B141",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B141. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "When fuel value is opened - fuel flows out by itself due to the low pressure - a bubble formed. Lost the droplet trying to dislodge the bubble. 2nd try - may be a bubble still. Good free deployment. Ignition - [rael?] extinction. Cool flame - vapor cloud. Burns to completion.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H141",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H141. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G141",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G141. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F141",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F141. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 75.99375,
     "max": 75.99375,
     "quality": "reported",
     "raw": "0.75 atm",
     "column": "Master Sheet!E141",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E141. This is a setting, not a measurement. NASA gives 0.75 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.264,
     "max": 4.264,
     "quality": "reported",
     "raw": "4.264",
     "column": "DATA!B141",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B141. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-26",
     "quality": "reported",
     "raw": "2017-07-26 00:00:00",
     "column": "Master Sheet!B141",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B141. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1345",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1345",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 83,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_mm2_s": {
     "min": 0.394,
     "max": 0.394,
     "quality": "reported",
     "raw": "0.394",
     "column": "DATA!D142",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D142. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J142",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J142. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H142",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H142. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G142",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G142. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F142",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F142. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 75.99375,
     "max": 75.99375,
     "quality": "reported",
     "raw": "0.75 atm",
     "column": "Master Sheet!E142",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E142. This is a setting, not a measurement. NASA gives 0.75 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 5.073,
     "max": 5.073,
     "quality": "reported",
     "raw": "5.073",
     "column": "DATA!B142",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B142. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-26",
     "quality": "reported",
     "raw": "2017-07-26 00:00:00",
     "column": "Master Sheet!B142",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B142. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1350",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1350",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 84,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "[.60]/[.40] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Master Sheet!J147",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J147. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B147",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B147. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment. Slow drift to lower igniter that continues after igniters pull away. Drift continues SE during burn. Hot flame burns ~9 sec and extinguishes w/out oscillating. Vapor cloud starts forming close to droplet w/ large soot agglomerate ~10 sec after extinction. Droplet likely drifted out of HiBMS FOV before vapor cloud but may have drifted back in.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H147",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H147. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G147",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G147. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F147",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F147. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 75.99375,
     "max": 75.99375,
     "quality": "reported",
     "raw": "0.75 atm",
     "column": "Master Sheet!E147",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E147. This is a setting, not a measurement. NASA gives 0.75 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-07-27",
     "quality": "reported",
     "raw": "2017-07-27 00:00:00",
     "column": "Master Sheet!B147",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B147. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1351",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1351",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 85,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.147,
     "max": 0.147,
     "quality": "reported",
     "raw": "0.147",
     "column": "DATA!E148",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E148. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "DATA!D148",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D148. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 4.913,
     "max": 4.913,
     "quality": "reported",
     "raw": "4.913",
     "column": "DATA!F148",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F148. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.992,
     "max": 4.992,
     "quality": "reported",
     "raw": "4.992",
     "column": "DATA!C148",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C148. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J148",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J148. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B148",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B148. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Small residual drop after opening valve - got rid of it. Fuel came out when value opened made 4.5 mm drop. Dispensed a little fuel but got bubbles. Large bubble on surface after deployment. Bubble burst when igniters came on. Good ignition in ~6 sec. Flame quickly becomes dim blue and extinguishes in ~10 sec. Vapor cloud starts to form close to droplet in ~12 sec. Large residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H148",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H148. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G148",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G148. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F148",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F148. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 50.6625,
     "quality": "reported",
     "raw": "0.5 atm",
     "column": "Master Sheet!E148",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E148. This is a setting, not a measurement. NASA gives 0.5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 5.152,
     "max": 5.152,
     "quality": "reported",
     "raw": "5.152",
     "column": "DATA!B148",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B148. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-31",
     "quality": "reported",
     "raw": "2017-07-31 00:00:00",
     "column": "Master Sheet!B148",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B148. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1352",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1352",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 86,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J149",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J149. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B149",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B149. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Lots of bubbles when valve opens. Large bubble on surface when droplet deployed on fiber. Bubble burst when igniters came on. Good ignition, no motion after ignition. Good ignition, flame quickly becomes dim blue and extinguishes w/out oscillations in ~9 sec. Vapor cloud forms close to droplet in ~12 sec. Large residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H149",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H149. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G149",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G149. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F149",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F149. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 50.6625,
     "quality": "reported",
     "raw": "0.5 atm",
     "column": "Master Sheet!E149",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E149. This is a setting, not a measurement. NASA gives 0.5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-07-31",
     "quality": "reported",
     "raw": "2017-07-31 00:00:00",
     "column": "Master Sheet!B149",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B149. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1353",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1353",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 87,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J150",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J150. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B150",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B150. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Lots of bubbles on valve open. Near perfect deployment. Slow drift E during ignition. Droplet continues slow drift after igniters pull away. Flame becomes dim blue burns for ~10 sec. Droplet drifts to W edge of FOV, then hot flame extinguishes (no oscillations). Droplet drifts back to center during recording. Cool flame behavior similar to previous tests.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H150",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H150. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G150",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G150. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F150",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F150. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 50.6625,
     "quality": "reported",
     "raw": "0.5 atm",
     "column": "Master Sheet!E150",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E150. This is a setting, not a measurement. NASA gives 0.5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-07-31",
     "quality": "reported",
     "raw": "2017-07-31 00:00:00",
     "column": "Master Sheet!B150",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B150. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1354",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1354",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 88,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J151",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J151. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B151",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B151. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Fuel coming out w/ no dispenser motion. No bubbles @ ~4 mm. Droplet slowly growing. Lost droplet to lower needle. Fuel still flowingw/ no dispense. New droplet no bubbles. Droplet drifted to lower igniter during ignition and continued moving SE after igniters pulled away. Good hot flame burn - droplet left FOV about the time of hot flame extinction. Drifted back into color camera FOV.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H151",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H151. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G151",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G151. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F151",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F151. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 50.6625,
     "quality": "reported",
     "raw": "0.5 atm",
     "column": "Master Sheet!E151",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E151. This is a setting, not a measurement. NASA gives 0.5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-07-31",
     "quality": "reported",
     "raw": "2017-07-31 00:00:00",
     "column": "Master Sheet!B151",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B151. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1355",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1355",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 89,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.233,
     "max": 0.233,
     "quality": "reported",
     "raw": "0.233",
     "column": "DATA!E152",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E152. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.28,
     "max": 0.28,
     "quality": "reported",
     "raw": "0.28",
     "column": "DATA!D152",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D152. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 5.281,
     "max": 5.281,
     "quality": "reported",
     "raw": "5.281",
     "column": "DATA!F152",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F152. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 5.295,
     "max": 5.295,
     "quality": "reported",
     "raw": "5.295",
     "column": "DATA!C152",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C152. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.60]/[.40] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Master Sheet!J152",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J152. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B152",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B152. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Bubbling when valve opened. Large bubble on droplet. Lost droplet to upper needle. Still a lot of bubbling. Huge bubble in new droplet. Long ignition time ~9 sec. Luminous yellow flame quickly turns blue and extinguishes w/out oscillating in ~8 sec. Vapor cloud starts to form close to droplet in ~12 sec. Vapor cloud doesn't get too big. Large residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H152",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H152. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G152",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G152. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F152",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F152. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 50.6625,
     "quality": "reported",
     "raw": "0.5 atm",
     "column": "Master Sheet!E152",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E152. This is a setting, not a measurement. NASA gives 0.5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 5.458,
     "max": 5.458,
     "quality": "reported",
     "raw": "5.458",
     "column": "DATA!B152",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B152. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-08-01",
     "quality": "reported",
     "raw": "2017-08-01 00:00:00",
     "column": "Master Sheet!B152",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B152. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1359",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1359",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 90,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burning",
     "column": "Comments!B156",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B156. NASA's comment on this test says a cool flame burned.",
     "evidence": "A lot of bubbling, but good deployment on fiber. Good deployment on fiber-small bubble but it doesn't cause any problems. Good ignition in ~5 sec. Luminous yellow flame turns blue in ~2 sec. Hot flame extinguishes w/out oscillations in ~5 sec. Vapor cloud formation starts ~11 sec after extinction. High cool flame burning rate and no residual droplet on fiber. Maybe small residual droplet? Soomed in there seems to be one.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J156",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J156. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B156",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B156. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "A lot of bubbling, but good deployment on fiber. Good deployment on fiber-small bubble but it doesn't cause any problems. Good ignition in ~5 sec. Luminous yellow flame turns blue in ~2 sec. Hot flame extinguishes w/out oscillations in ~5 sec. Vapor cloud formation starts ~11 sec after extinction. High cool flame burning rate and no residual droplet on fiber. Maybe small residual droplet? Soomed in there seems to be one.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Master Sheet!H156",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H156. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Master Sheet!G156",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G156. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F156",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F156. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E156",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E156. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-09",
     "quality": "reported",
     "raw": "2017-08-09 00:00:00",
     "column": "Master Sheet!B156",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B156. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1360",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1360",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 91,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J157",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J157. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B157",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B157. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Cleared residual droplet from last test by heating it. Not much bubbling this test. Good deployment on fiber - some slow axial motion. Good ignition, with no motion (~7 sec). Luminous flame quickly turns dim blue and extinguishes w/out oscillations. Large vapor cloud forms. Large residual droplet on fiber that has very large aggregate particle.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Master Sheet!H157",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H157. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Master Sheet!G157",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G157. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F157",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F157. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E157",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E157. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-09",
     "quality": "reported",
     "raw": "2017-08-09 00:00:00",
     "column": "Master Sheet!B157",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B157. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1361",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1361",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 92,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J158",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J158. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B158",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B158. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment on fiber. Good ignition (~4 sec). Hot flame extinction (no oscillations) in ~6 sec. Vapor cloud forms ~15 sec after hot flame extinction. Very small residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Master Sheet!H158",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H158. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Master Sheet!G158",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G158. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F158",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F158. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E158",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E158. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-09",
     "quality": "reported",
     "raw": "2017-08-09 00:00:00",
     "column": "Master Sheet!B158",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B158. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1370",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1370",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 93,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.497,
     "max": 0.497,
     "quality": "reported",
     "raw": "0.497",
     "column": "DATA!E167",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E167. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.485,
     "max": 0.485,
     "quality": "reported",
     "raw": "0.485",
     "column": "DATA!D167",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D167. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B167",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B167. NASA's comment on this test says a cool flame burned.",
     "evidence": "Switching to second fuel. Tried to dry out needle tips. Lots of bubbling on initial dispense. Lost first droplet to lower needle. Good deployment on fiber. Good ignition in ~5 sec. Luminous yellow flame becomes dim blue and extinguishes in 4 sec. Vapor cloud formation in ~20 sec. Long, slow cool flame burn, large vapor cloud, no residual droplet. No re-ignition.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_mm": {
     "min": 4.13,
     "max": 4.13,
     "quality": "reported",
     "raw": "4.13",
     "column": "DATA!C167",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C167. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.60]/[.40] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Master Sheet!J167",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J167. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B167",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B167. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Switching to second fuel. Tried to dry out needle tips. Lots of bubbling on initial dispense. Lost first droplet to lower needle. Good deployment on fiber. Good ignition in ~5 sec. Luminous yellow flame becomes dim blue and extinguishes in 4 sec. Vapor cloud formation in ~20 sec. Long, slow cool flame burn, large vapor cloud, no residual droplet. No re-ignition.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Master Sheet!H167",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H167. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Master Sheet!G167",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G167. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F167",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F167. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E167",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E167. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.334,
     "max": 4.334,
     "quality": "reported",
     "raw": "4.334",
     "column": "DATA!B167",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B167. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-08-14",
     "quality": "reported",
     "raw": "2017-08-14 00:00:00",
     "column": "Master Sheet!B167",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B167. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1371",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1371",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 94,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.486,
     "max": 0.486,
     "quality": "reported",
     "raw": "0.486",
     "column": "DATA!E168",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E168. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "DATA!D168",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D168. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B168",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B168. NASA's comment on this test says a cool flame burned.",
     "evidence": "Some problems w/ computer on gnd. Reboot. Good deployment on fiber. Good ignition (`7 sec). Luminous flame quickly becomes dim blue extinguishes in ~4 sec. Vapor cloud starts forming ~20 sec after extinction far from droplet. Cool flame burns for almost 60 sec. Long, slow cool flame burn. No residual droplet or re-ignition.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "extinction_diameter_mm": {
     "min": 5.251,
     "max": 5.251,
     "quality": "reported",
     "raw": "5.251",
     "column": "DATA!C168",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C168. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.60]/[.40] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Master Sheet!J168",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J168. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B168",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B168. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Some problems w/ computer on gnd. Reboot. Good deployment on fiber. Good ignition (`7 sec). Luminous flame quickly becomes dim blue extinguishes in ~4 sec. Vapor cloud starts forming ~20 sec after extinction far from droplet. Cool flame burns for almost 60 sec. Long, slow cool flame burn. No residual droplet or re-ignition.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Master Sheet!H168",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H168. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Master Sheet!G168",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G168. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F168",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F168. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E168",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E168. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 5.416,
     "max": 5.416,
     "quality": "reported",
     "raw": "5.416",
     "column": "DATA!B168",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B168. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-08-14",
     "quality": "reported",
     "raw": "2017-08-14 00:00:00",
     "column": "Master Sheet!B168",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B168. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1372",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1372",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 95,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B169",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B169. NASA's comment on this test says a cool flame burned.",
     "evidence": "Lost first droplet to lower needle. Lost second droplet also. Good deployment on fiber. Good ignition. Luminous flame becomes dim blue, extinguishes quickly. Long cool flame burn. Large re-ignition @ 25 sec after hot-flame extinction. Droplet dislodges from fiber and drifts off.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "[.60]/[.40] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Master Sheet!J169",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J169. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B169",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B169. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Lost first droplet to lower needle. Lost second droplet also. Good deployment on fiber. Good ignition. Luminous flame becomes dim blue, extinguishes quickly. Long cool flame burn. Large re-ignition @ 25 sec after hot-flame extinction. Droplet dislodges from fiber and drifts off.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Master Sheet!H169",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H169. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Master Sheet!G169",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G169. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F169",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F169. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E169",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E169. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-14",
     "quality": "reported",
     "raw": "2017-08-14 00:00:00",
     "column": "Master Sheet!B169",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B169. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1375",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1375",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 96,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J172",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J172. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B172",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B172. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Droplet drifter past lower igniter on deployment. Good ignition in ~11 sec. Short ~3 sec hot flame burn. Vapor cloud starts to form @15 sec. Fuel droplet consumed (huge vapor cloud) @ ~60 sec.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Master Sheet!H172",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H172. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Master Sheet!G172",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G172. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F172",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F172. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E172",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E172. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-16",
     "quality": "reported",
     "raw": "2017-08-16 00:00:00",
     "column": "Master Sheet!B172",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B172. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1376",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1376",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 97,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.611,
     "max": 0.611,
     "quality": "reported",
     "raw": "0.611",
     "column": "DATA!E173",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E173. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 1.193,
     "max": 1.193,
     "quality": "reported",
     "raw": "1.193",
     "column": "DATA!D173",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D173. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.164,
     "max": 4.164,
     "quality": "reported",
     "raw": "4.164",
     "column": "DATA!C173",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C173. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.60]/[.40] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Master Sheet!J173",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J173. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Master Sheet!H173",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H173. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Master Sheet!G173",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G173. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F173",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F173. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E173",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E173. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 4.472,
     "max": 4.472,
     "quality": "reported",
     "raw": "4.472",
     "column": "DATA!B173",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B173. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-08-16",
     "quality": "reported",
     "raw": "2017-08-16 00:00:00",
     "column": "Master Sheet!B173",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B173. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1377",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1377",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 98,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.046,
     "max": 0.046,
     "quality": "reported",
     "raw": "0.046",
     "column": "DATA!E174",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E174. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.043,
     "max": 0.043,
     "quality": "reported",
     "raw": "0.043",
     "column": "DATA!D174",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D174. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "extinction_diameter_cool_mm": {
     "min": 6.153,
     "max": 6.153,
     "quality": "reported",
     "raw": "6.153",
     "column": "DATA!F174",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F174. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 6.215,
     "max": 6.215,
     "quality": "reported",
     "raw": "6.215",
     "column": "DATA!C174",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C174. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "[.60]/[.40] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Master Sheet!J174",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J174. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B174",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B174. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Clean - clear - fuel - fiber looks soot free. Large droplet (droplet jiggled - crew? Hit the rack?). Droplet slides along the fiber. Re-position the droplet between the igniters by fiber translation. Long re-ignition delay. Quick flame extinction. Vapor cloud forms. Large droplet seen through the cloud. Large droplet seen still remaining when light was turned on.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Master Sheet!H174",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H174. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Master Sheet!G174",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G174. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F174",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F174. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E174",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E174. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "size_mm": {
     "min": 6.433,
     "max": 6.433,
     "quality": "reported",
     "raw": "6.433",
     "column": "DATA!B174",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B174. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-08-16",
     "quality": "reported",
     "raw": "2017-08-16 00:00:00",
     "column": "Master Sheet!B174",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B174. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1378",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1378",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 99,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J175",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J175. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B175",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B175. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Droplet moved E on fiber, reposition to center. No hot-flame ignition. Large vapor cloud forms quickly. Unknown cool flame burn. N-dodecane (100% at same condition). Hot-flame in ~6 sec. No hot flame after igniters. Short cool flame burn.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Master Sheet!H175",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H175. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Master Sheet!G175",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G175. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F175",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F175. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E175",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E175. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-18",
     "quality": "reported",
     "raw": "2017-08-18 00:00:00",
     "column": "Master Sheet!B175",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B175. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1379",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1379",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 100,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J176",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J176. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B176",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B176. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Some bubbles during dispense. Large bubble on deploy but droplet didn't move. No ignition again. Not sure why fuel isn't igniting.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Master Sheet!H176",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H176. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No ignition",
     "column": "Comments!B176",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B176. NASA's comment on this test.",
     "evidence": "Some bubbles during dispense. Large bubble on deploy but droplet didn't move. No ignition again. Not sure why fuel isn't igniting.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Master Sheet!G176",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G176. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F176",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F176. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E176",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E176. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-18",
     "quality": "reported",
     "raw": "2017-08-18 00:00:00",
     "column": "Master Sheet!B176",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B176. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1380",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1380",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 101,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J177",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J177. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B177",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B177. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Moved igniters 400 cts away from droplet. No ignition again.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Master Sheet!H177",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H177. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No ignition",
     "column": "Comments!B177",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B177. NASA's comment on this test.",
     "evidence": "Moved igniters 400 cts away from droplet. No ignition again.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Master Sheet!G177",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G177. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F177",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F177. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E177",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E177. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-18",
     "quality": "reported",
     "raw": "2017-08-18 00:00:00",
     "column": "Master Sheet!B177",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B177. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1381",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1381",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 102,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J178",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J178. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Master Sheet!H178",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H178. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No ignition",
     "column": "Comments!B178",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B178. NASA's comment on this test.",
     "evidence": "Move igniter back and then in closer. Good deployment on fiber. No ignition.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Master Sheet!G178",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G178. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F178",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F178. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E178",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E178. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-18",
     "quality": "reported",
     "raw": "2017-08-18 00:00:00",
     "column": "Master Sheet!B178",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B178. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1382",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1382",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 103,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "[.75]/[.25] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Master Sheet!J179",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J179. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B179",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B179. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Pre-heat droplet in E01 location. 8 W 5000 ms. Run AS. Pulling back 1000 cts. No ignition. Igniters steady, then get brighter briefly before pulling away.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Master Sheet!H179",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H179. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No ignition",
     "column": "Comments!B179",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B179. NASA's comment on this test.",
     "evidence": "Pre-heat droplet in E01 location. 8 W 5000 ms. Run AS. Pulling back 1000 cts. No ignition. Igniters steady, then get brighter briefly before pulling away.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Master Sheet!G179",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G179. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F179",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F179. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E179",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E179. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-18",
     "quality": "reported",
     "raw": "2017-08-18 00:00:00",
     "column": "Master Sheet!B179",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B179. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1385",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1385",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 104,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "[.60]/[.40] C12H26/iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Master Sheet!J182",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J182. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B182",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B182. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Large bubble in droplet. Bubble burst when igniters start. Igniters get bright, then get a bit brighter half way through. No hot-flame ignition. ~4 mm residual droplet.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Master Sheet!H182",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H182. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Master Sheet!G182",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G182. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F182",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F182. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E182",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E182. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-21",
     "quality": "reported",
     "raw": "2017-08-21 00:00:00",
     "column": "Master Sheet!B182",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B182. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1388",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1388",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 105,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J185",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J185. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B185",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B185. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Some bubbles in fuel line. Good deployment on fiber. ~7 sec ignition time. Sooty flame for a few seconds, became dim blue and extinguished without oscillations. Vapor cloud at 15 sec. No residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H185",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H185. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G185",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G185. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F185",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F185. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E185",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E185. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-25",
     "quality": "reported",
     "raw": "2017-08-25 00:00:00",
     "column": "Master Sheet!B185",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B185. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1389",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1389",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 106,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J186",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J186. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B186",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B186. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Droplet drifted E after deployment on fiber. Centered droplet, good. Residual droplet burns after ignition (~2 sec). ~11 sec ignition. ~8 sec burn ends w/out oscillations. Vapor cloud @15 sec after extinction. Looks like a soot particle in droplet.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H186",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H186. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G186",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G186. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F186",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F186. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E186",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E186. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-25",
     "quality": "reported",
     "raw": "2017-08-25 00:00:00",
     "column": "Master Sheet!B186",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B186. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1390",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1390",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 107,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J187",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J187. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H187",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H187. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G187",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G187. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F187",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F187. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E187",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E187. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-25",
     "quality": "reported",
     "raw": "2017-08-25 00:00:00",
     "column": "Master Sheet!B187",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B187. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1391",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1391",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 108,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J188",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J188. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B188",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B188. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Droplet shifted E after deployment. Re-positioned. Residual droplet ignited. Hot-flame extinction. Vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H188",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H188. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G188",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G188. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F188",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F188. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E188",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E188. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-25",
     "quality": "reported",
     "raw": "2017-08-25 00:00:00",
     "column": "Master Sheet!B188",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B188. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1392",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1392",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 109,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool-flame burn",
     "column": "Comments!B189",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B189. NASA's comment on this test says a cool flame burned.",
     "evidence": "Small residual drop on needle. Dispensed some fuel and burned it off. Droplet shifted W and lodged on a soot agglomerate after deployment. Soot initial flame becomes dim blue and extinguishes. Long hot flame burn. Long cool-flame burn w/ residual droplet on fiber. Large vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J189",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J189. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B189",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B189. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Small residual drop on needle. Dispensed some fuel and burned it off. Droplet shifted W and lodged on a soot agglomerate after deployment. Soot initial flame becomes dim blue and extinguishes. Long hot flame burn. Long cool-flame burn w/ residual droplet on fiber. Large vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H189",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H189. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G189",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G189. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F189",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F189. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E189",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E189. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-28",
     "quality": "reported",
     "raw": "2017-08-28 00:00:00",
     "column": "Master Sheet!B189",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B189. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1393",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1393",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 110,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B190",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B190. NASA's comment on this test says a cool flame burned.",
     "evidence": "Perfect deployment. Very slow drift W after ignition. Near-perfect test. Stays in FOV the entire test. Long hot-flame burn w/ no oscillations at extinction. Long cool flame burn and large vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J190",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J190. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H190",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H190. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G190",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G190. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F190",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F190. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E190",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E190. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-28",
     "quality": "reported",
     "raw": "2017-08-28 00:00:00",
     "column": "Master Sheet!B190",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B190. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1394",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1394",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 111,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J191",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J191. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B191",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B191. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Droplet ~4.5 mm. Perfect deployment. Droplet did not ignite. Very slow drift S. Saving for vaporization data.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H191",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H191. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "did not ignite",
     "column": "Comments!B191",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B191. NASA's comment on this test.",
     "evidence": "Droplet ~4.5 mm. Perfect deployment. Droplet did not ignite. Very slow drift S. Saving for vaporization data.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G191",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G191. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F191",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F191. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E191",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E191. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-28",
     "quality": "reported",
     "raw": "2017-08-28 00:00:00",
     "column": "Master Sheet!B191",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B191. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1395",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1395",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 112,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J192",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J192. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B192",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B192. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Excellent deployment. Droplet starts to drift to upper igniter. Drifts NW after igniter withdraw. Leaves HiBMS FOV shortly after hot flame extinction.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H192",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H192. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G192",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G192. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F192",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F192. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E192",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E192. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-28",
     "quality": "reported",
     "raw": "2017-08-28 00:00:00",
     "column": "Master Sheet!B192",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B192. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1396",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1396",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 113,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J193",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J193. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H193",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H193. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G193",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G193. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F193",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F193. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E193",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E193. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-28",
     "quality": "reported",
     "raw": "2017-08-28 00:00:00",
     "column": "Master Sheet!B193",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B193. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1397",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1397",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 114,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B194",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B194. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deployment on fiber, small bubble on surface. Some debris on droplet on fiber to W of droplet ignites after hot flame ignites. Hot-flame ignition in ~8 sec. Debris burns for ~1 sec. Luminous hot flame burns for ~4 sec then turns dim blue. Hot flame extinguishes in 12 sec w/out oscillating. Vapor cloud forms at ~15 sec. Long cool flame burn w/ large vapor cloud. Large residual cloudy droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J194",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J194. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B194",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B194. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment on fiber, small bubble on surface. Some debris on droplet on fiber to W of droplet ignites after hot flame ignites. Hot-flame ignition in ~8 sec. Debris burns for ~1 sec. Luminous hot flame burns for ~4 sec then turns dim blue. Hot flame extinguishes in 12 sec w/out oscillating. Vapor cloud forms at ~15 sec. Long cool flame burn w/ large vapor cloud. Large residual cloudy droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H194",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H194. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G194",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G194. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F194",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F194. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 75.99375,
     "max": 75.99375,
     "quality": "reported",
     "raw": ".75 atm",
     "column": "Master Sheet!E194",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E194. This is a setting, not a measurement. NASA gives .75 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-29",
     "quality": "reported",
     "raw": "2017-08-29 00:00:00",
     "column": "Master Sheet!B194",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B194. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1398",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1398",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 115,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B195",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B195. NASA's comment on this test says a cool flame burned.",
     "evidence": "Large bubble during droplet formation. Moves to surface. Bubble burst on ignition. Good, ignition, no droplet motion. Ignition in ~10 sec. Luminous in ~10 sec. Luminous flame turns dim blue in ~2 sec. Hot flame turns dim blue in ~2 sec. Hot flame extinguishes in ~9 sec w/ no oscillations. Vapor cloud @ approx. 15 sec. Long cool flame burn, large residual droplet. Burned residual droplet off - recording on Flex-1398-2017-98-29-15h06m01s-F241B02_PostBurn.ts.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J195",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J195. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B195",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B195. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Large bubble during droplet formation. Moves to surface. Bubble burst on ignition. Good, ignition, no droplet motion. Ignition in ~10 sec. Luminous in ~10 sec. Luminous flame turns dim blue in ~2 sec. Hot flame turns dim blue in ~2 sec. Hot flame extinguishes in ~9 sec w/ no oscillations. Vapor cloud @ approx. 15 sec. Long cool flame burn, large residual droplet. Burned residual droplet off - recording on Flex-1398-2017-98-29-15h06m01s-F241B02_PostBurn.ts.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H195",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H195. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G195",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G195. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F195",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F195. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 75.99375,
     "max": 75.99375,
     "quality": "reported",
     "raw": ".75 atm",
     "column": "Master Sheet!E195",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E195. This is a setting, not a measurement. NASA gives .75 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-29",
     "quality": "reported",
     "raw": "2017-08-29 00:00:00",
     "column": "Master Sheet!B195",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B195. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1399",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1399",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 116,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool-flame burn",
     "column": "Comments!B196",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B196. NASA's comment on this test says a cool flame burned.",
     "evidence": "Excellent deployment. Very slow drift S after ignition. Stays in FOV for most of hot-flame and cool-flame burn. Ignition in ~7 sec. Luminous flame for ~3 sec. Hot-flame extinguishes w/out oscillations in ~12 sec. Long coll flame burn and large vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J196",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J196. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H196",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H196. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G196",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G196. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F196",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F196. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 75.99375,
     "max": 75.99375,
     "quality": "reported",
     "raw": ".75 atm",
     "column": "Master Sheet!E196",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E196. This is a setting, not a measurement. NASA gives .75 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-29",
     "quality": "reported",
     "raw": "2017-08-29 00:00:00",
     "column": "Master Sheet!B196",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B196. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1400",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1400",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 117,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B197",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B197. NASA's comment on this test says a cool flame burned.",
     "evidence": "Lost first droplet to lower needle. Perfect deployment and ignition. No drift, stays in FOV of all cameras. Ignitoin in ~7 sec. Soot luminosity disappears in ~4 sec. Hot flame extinction in ~12 sec. Long cool flame burn and large vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J197",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J197. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B197",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B197. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Lost first droplet to lower needle. Perfect deployment and ignition. No drift, stays in FOV of all cameras. Ignitoin in ~7 sec. Soot luminosity disappears in ~4 sec. Hot flame extinction in ~12 sec. Long cool flame burn and large vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H197",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H197. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G197",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G197. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F197",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F197. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 75.99375,
     "max": 75.99375,
     "quality": "reported",
     "raw": ".75 atm",
     "column": "Master Sheet!E197",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E197. This is a setting, not a measurement. NASA gives .75 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-29",
     "quality": "reported",
     "raw": "2017-08-29 00:00:00",
     "column": "Master Sheet!B197",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B197. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1401",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1401",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 118,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B198",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B198. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deployment on fiber. Long ignition time ~10 sec. Luminous hot flame becomes dim blue quickly, extinguishes in ~10 sec. Long cool flame burn, large vapor cloud. Residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J198",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J198. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B198",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B198. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment on fiber. Long ignition time ~10 sec. Luminous hot flame becomes dim blue quickly, extinguishes in ~10 sec. Long cool flame burn, large vapor cloud. Residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H198",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H198. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G198",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G198. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F198",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F198. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 75.99375,
     "max": 75.99375,
     "quality": "reported",
     "raw": ".75 atm",
     "column": "Master Sheet!E198",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E198. This is a setting, not a measurement. NASA gives .75 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-08-29",
     "quality": "reported",
     "raw": "2017-08-29 00:00:00",
     "column": "Master Sheet!B198",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B198. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1402",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1402",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 119,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J199",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J199. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B199",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B199. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "FOMA ops deest prior to the test - big bubble seen inside the droplet. Bubble popped when igniter was turned on prior to ignition. Nice hot-flame for a few seconds. Extinction. Cool flame. Vapor cloud - seems much more diffuse compared to n-alkanes. Large extinguished droplet - still there at the end.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H199",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H199. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G199",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G199. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F199",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F199. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 50.6625,
     "quality": "reported",
     "raw": "0.5 atm",
     "column": "Master Sheet!E199",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E199. This is a setting, not a measurement. NASA gives 0.5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-01",
     "quality": "reported",
     "raw": "2017-09-01 00:00:00",
     "column": "Master Sheet!B199",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B199. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1403",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1403",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 120,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J200",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J200. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B200",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B200. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Droplet clean - no bubble. Ignition. Hot-flame (few seconds). Extinction. Cool flame. Vapor cloud - forms immediately - starting close to the droplet surface area speadsout. Good run. Large - extinguished droplet seen when light- [Curnodon?].",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H200",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H200. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G200",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G200. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F200",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F200. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 50.6625,
     "quality": "reported",
     "raw": "0.5 atm",
     "column": "Master Sheet!E200",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E200. This is a setting, not a measurement. NASA gives 0.5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-01",
     "quality": "reported",
     "raw": "2017-09-01 00:00:00",
     "column": "Master Sheet!B200",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B200. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1404",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1404",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 121,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J201",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J201. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B201",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B201. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Doplet - looks clear - small bubble formed and moved to the middle of the droplet. Ignition. Hot flame extinction. Cool flame. Vapor cloud start - close to the surface area quickly spreads. Large extingion diameter - CF. (Droplet slightly drifted to lower-right and moved up).",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H201",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H201. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G201",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G201. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F201",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F201. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 50.6625,
     "quality": "reported",
     "raw": "0.5 atm",
     "column": "Master Sheet!E201",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E201. This is a setting, not a measurement. NASA gives 0.5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-01",
     "quality": "reported",
     "raw": "2017-09-01 00:00:00",
     "column": "Master Sheet!B201",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B201. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1405",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1405",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 122,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J202",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J202. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B202",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B202. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Small bubble formed - another bigger bubble. The bubble popped - droplet moved on to one needle (failed attempt). 2nd try - many small bubbles. Droplet hit the bottom igniter. Moved up. Hot flame. Oscillation prior to hot flame extinction. (Partial success).",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H202",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H202. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G202",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G202. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F202",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F202. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 50.6625,
     "quality": "reported",
     "raw": "0.5 atm",
     "column": "Master Sheet!E202",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E202. This is a setting, not a measurement. NASA gives 0.5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-01",
     "quality": "reported",
     "raw": "2017-09-01 00:00:00",
     "column": "Master Sheet!B202",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B202. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1406",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1406",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 123,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J203",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J203. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H203",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H203. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G203",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G203. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F203",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F203. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 50.6625,
     "quality": "reported",
     "raw": "0.5 atm",
     "column": "Master Sheet!E203",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E203. This is a setting, not a measurement. NASA gives 0.5 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-01",
     "quality": "reported",
     "raw": "2017-09-01 00:00:00",
     "column": "Master Sheet!B203",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B203. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1407",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1407",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 124,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B204",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B204. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deployment on fiber. Good ignition in ~8 sec. Luminous flame turns dim blue in ~4 sec, then oscillates once and extinguishes in ~10 sec. Vapor cloud in ~15 sec. Long cool flame burn, no residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J204",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J204. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B204",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B204. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment on fiber. Good ignition in ~8 sec. Luminous flame turns dim blue in ~4 sec, then oscillates once and extinguishes in ~10 sec. Vapor cloud in ~15 sec. Long cool flame burn, no residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H204",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H204. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G204",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G204. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F204",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F204. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 126.65625,
     "max": 126.65625,
     "quality": "reported",
     "raw": "1.25 atm",
     "column": "Master Sheet!E204",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E204. This is a setting, not a measurement. NASA gives 1.25 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-06",
     "quality": "reported",
     "raw": "2017-09-06 00:00:00",
     "column": "Master Sheet!B204",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B204. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1408",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1408",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 125,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B205",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B205. NASA's comment on this test says a cool flame burned.",
     "evidence": "Some bubbling on initial defense. Bubbling stopped, good deployment on fiber. Good ignition in ~12 sec. Small residual droplet from last test burned up. Only short burn ~1-2 sec. flame extinction in ~8 sec. Long cool flame burn. Small residual droplet. Large vapor cloud starts forming @15 sec after extinction.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J205",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J205. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B205",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B205. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Some bubbling on initial defense. Bubbling stopped, good deployment on fiber. Good ignition in ~12 sec. Small residual droplet from last test burned up. Only short burn ~1-2 sec. flame extinction in ~8 sec. Long cool flame burn. Small residual droplet. Large vapor cloud starts forming @15 sec after extinction.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H205",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H205. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G205",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G205. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F205",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F205. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 126.65625,
     "max": 126.65625,
     "quality": "reported",
     "raw": "1.25 atm",
     "column": "Master Sheet!E205",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E205. This is a setting, not a measurement. NASA gives 1.25 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-06",
     "quality": "reported",
     "raw": "2017-09-06 00:00:00",
     "column": "Master Sheet!B205",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B205. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1409",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1409",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 126,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J206",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J206. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H206",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H206. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G206",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G206. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F206",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F206. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 126.65625,
     "max": 126.65625,
     "quality": "reported",
     "raw": "1.25 atm",
     "column": "Master Sheet!E206",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E206. This is a setting, not a measurement. NASA gives 1.25 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-06",
     "quality": "reported",
     "raw": "2017-09-06 00:00:00",
     "column": "Master Sheet!B206",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B206. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1410",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1410",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 127,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J207",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J207. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H207",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H207. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G207",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G207. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F207",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F207. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 126.65625,
     "max": 126.65625,
     "quality": "reported",
     "raw": "1.25 atm",
     "column": "Master Sheet!E207",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E207. This is a setting, not a measurement. NASA gives 1.25 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-06",
     "quality": "reported",
     "raw": "2017-09-06 00:00:00",
     "column": "Master Sheet!B207",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B207. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1411",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1411",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 128,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B208",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B208. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deployment, but had to re-position droplet. Good ignition in ~8 sec, no droplet motion. Hot flame burns w/ no oscillations in ~9 sec. Long cool flame burn. Large vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J208",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J208. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B208",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B208. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment, but had to re-position droplet. Good ignition in ~8 sec, no droplet motion. Hot flame burns w/ no oscillations in ~9 sec. Long cool flame burn. Large vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H208",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H208. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G208",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G208. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F208",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F208. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 126.65625,
     "max": 126.65625,
     "quality": "reported",
     "raw": "1.25 atm",
     "column": "Master Sheet!E208",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E208. This is a setting, not a measurement. NASA gives 1.25 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1412",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1412",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 129,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B209",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B209. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deployment on fiber. Good ignition w/ no motion in ~9 sec. Luminous yellow flame turns dim blue in ~7 sec. Hot flame extinction in ~10 sec. Vapor cloud starts forming ~17 sec after hot flame extinguishes. Long cool flame burn, no residual droplet on fiber and no re-ignition.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J209",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J209. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B209",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B209. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment on fiber. Good ignition w/ no motion in ~9 sec. Luminous yellow flame turns dim blue in ~7 sec. Hot flame extinction in ~10 sec. Vapor cloud starts forming ~17 sec after hot flame extinguishes. Long cool flame burn, no residual droplet on fiber and no re-ignition.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H209",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H209. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G209",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G209. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F209",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F209. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 202.65,
     "max": 202.65,
     "quality": "reported",
     "raw": "2 atm",
     "column": "Master Sheet!E209",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E209. This is a setting, not a measurement. NASA gives 2 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-08",
     "quality": "reported",
     "raw": "2017-09-08 00:00:00",
     "column": "Master Sheet!B209",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B209. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1413",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1413",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 130,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J210",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J210. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B210",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B210. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment position (maybe a small bubble). 15 min LOS before test point run. No motion during ignition. Long ignition time ~14 sec. Hot flame is luminous turns dim blue and extinguishes w/ small oscillation in ~8 sec. Vapor cloud starts to form in ~20 sec. Droplet shifts W to soot agglomerate on fiber at ~60 sec. Huge re-ignition starts hot-flame burning again.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H210",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H210. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G210",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G210. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F210",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F210. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 202.65,
     "max": 202.65,
     "quality": "reported",
     "raw": "2 atm",
     "column": "Master Sheet!E210",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E210. This is a setting, not a measurement. NASA gives 2 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-08",
     "quality": "reported",
     "raw": "2017-09-08 00:00:00",
     "column": "Master Sheet!B210",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B210. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1414",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1414",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 131,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B211",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B211. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deployment on fiber. Moved igniters a little closer. Good ignition, almost no motion during burn. Ignition in ~10 sec. Extinction w/ small oscillation in ~8 sec. Very long and slow cool flame burn. No residual droplet and large vapor cloud. Vapor cloud starts to form in ~20 sec after hot-flame extinction.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J211",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J211. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B211",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B211. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment on fiber. Moved igniters a little closer. Good ignition, almost no motion during burn. Ignition in ~10 sec. Extinction w/ small oscillation in ~8 sec. Very long and slow cool flame burn. No residual droplet and large vapor cloud. Vapor cloud starts to form in ~20 sec after hot-flame extinction.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H211",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H211. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G211",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G211. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F211",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F211. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 202.65,
     "max": 202.65,
     "quality": "reported",
     "raw": "2 atm",
     "column": "Master Sheet!E211",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E211. This is a setting, not a measurement. NASA gives 2 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-08",
     "quality": "reported",
     "raw": "2017-09-08 00:00:00",
     "column": "Master Sheet!B211",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B211. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1415",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1415",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 132,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B212",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B212. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deployment on fiber, minimal motion. Good ignition in ~8 sec with minimal motion. Hot-flame burned for ~9 sec and extinguished w/out oscillating. Vapor cloud starts forming ~20 sec after hot-flame extinction. Long cool flame burn and no residual droplet on fiber. Large vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J212",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J212. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B212",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B212. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment on fiber, minimal motion. Good ignition in ~8 sec with minimal motion. Hot-flame burned for ~9 sec and extinguished w/out oscillating. Vapor cloud starts forming ~20 sec after hot-flame extinction. Long cool flame burn and no residual droplet on fiber. Large vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H212",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H212. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G212",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G212. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F212",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F212. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 202.65,
     "max": 202.65,
     "quality": "reported",
     "raw": "2 atm",
     "column": "Master Sheet!E212",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E212. This is a setting, not a measurement. NASA gives 2 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-08",
     "quality": "reported",
     "raw": "2017-09-08 00:00:00",
     "column": "Master Sheet!B212",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B212. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1416",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1416",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 133,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J213",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J213. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B213",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B213. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Drift to lower igniter after good deployment. Drift S slowly after igniters pull away. Droplet leaves FOVs after hot-flame extinction, but before burn complete.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H213",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H213. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G213",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G213. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F213",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F213. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 202.65,
     "max": 202.65,
     "quality": "reported",
     "raw": "2 atm",
     "column": "Master Sheet!E213",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E213. This is a setting, not a measurement. NASA gives 2 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-08",
     "quality": "reported",
     "raw": "2017-09-08 00:00:00",
     "column": "Master Sheet!B213",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B213. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1417",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1417",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 134,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J214",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J214. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B214",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B214. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment on fiber. Droplet shifted W on fiber during ignition. Small flame on lower igniter, but it doesn't trip radiometer. Ignition in ~7 sec. Sooty flame turns dim blue in 6 sec, oscillates and extinguishes in ~11 sec. Looks like the droplet burned with a warm flame to completion.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H214",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H214. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G214",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G214. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F214",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F214. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E214",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E214. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-11",
     "quality": "reported",
     "raw": "2017-09-11 00:00:00",
     "column": "Master Sheet!B214",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B214. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1418",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1418",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 135,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J215",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J215. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B215",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B215. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Lost first droplet to lower needle. Good deployment on fiber. Droplet shifts W during ignition. Ignition with luminous flame in ~9 sec. Luminous flame turns dim blue in ~5 sec, oscillates several times and extinguishes in ~9 sec. Warm flame burning for ~18 sec. Hot flame extinction - 0 sec. Warm flame. Re-ignition - 18 sec. Re-ignition - 23 sec. Re-ignition - 33 sec. Re-ignition - 38 sec. 7 total re-ignitions.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H215",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H215. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G215",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G215. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F215",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F215. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E215",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E215. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-11",
     "quality": "reported",
     "raw": "2017-09-11 00:00:00",
     "column": "Master Sheet!B215",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B215. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1419",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1419",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 136,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J216",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J216. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B216",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B216. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Re-ignite residual droplet. Ignition time ~14 sec. Burn time ~9 sec. Warm flame burning for ~26 sec. 9 re-ignitions start cycling then. Long burn and completefuel burnout w/ almost no vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H216",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H216. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G216",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G216. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F216",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F216. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E216",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E216. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-11",
     "quality": "reported",
     "raw": "2017-09-11 00:00:00",
     "column": "Master Sheet!B216",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B216. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1420",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1420",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 137,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J217",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J217. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B217",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B217. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment on fiber. Droplet shifted E and clung to soot agglomerate on fiber. Good ignition in ~7 sec. Droplet burns with a warm flame to completion. No vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H217",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H217. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Master Sheet!G217",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G217. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Master Sheet!F217",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F217. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E217",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E217. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-11",
     "quality": "reported",
     "raw": "2017-09-11 00:00:00",
     "column": "Master Sheet!B217",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B217. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1421",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1421",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 138,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B218",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B218. NASA's comment on this test says a cool flame burned.",
     "evidence": "Still residual fuel on igniter. Spent some time vaporizing it off w/ igniters. Good deployment on fiber. Good ignition in ~8 sec. Very little luminosity. Only 5 sec hot flame burn. Vapor cloud formation starts at ~20 sec . ~60 sec cool flame burn with no residual droplet.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J218",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J218. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B218",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B218. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Still residual fuel on igniter. Spent some time vaporizing it off w/ igniters. Good deployment on fiber. Good ignition in ~8 sec. Very little luminosity. Only 5 sec hot flame burn. Vapor cloud formation starts at ~20 sec . ~60 sec cool flame burn with no residual droplet.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H218",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H218. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Master Sheet!G218",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G218. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Master Sheet!F218",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F218. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E218",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E218. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-14",
     "quality": "reported",
     "raw": "2017-09-14 00:00:00",
     "column": "Master Sheet!B218",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B218. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1422",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1422",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 139,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B219",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B219. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deployment on fiber. Looks like a small flame near the droplet when igniters were on? Ignition in ~11 sec. Dim blue hot flame very close to the droplet surface only burns for ~3 sec. Small reflection on droplet surface. Vapor cloud at ~20 sec. Very long cool flame burn with no residual droplet.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J219",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J219. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B219",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B219. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment on fiber. Looks like a small flame near the droplet when igniters were on? Ignition in ~11 sec. Dim blue hot flame very close to the droplet surface only burns for ~3 sec. Small reflection on droplet surface. Vapor cloud at ~20 sec. Very long cool flame burn with no residual droplet.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H219",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H219. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Master Sheet!G219",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G219. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Master Sheet!F219",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F219. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E219",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E219. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-14",
     "quality": "reported",
     "raw": "2017-09-14 00:00:00",
     "column": "Master Sheet!B219",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B219. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1423",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1423",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 140,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B220",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B220. NASA's comment on this test says a cool flame burned.",
     "evidence": "Moving igniter a little out. Perfect deployment. Slow drift S after ignition but stays in FOV for most of hot and cool flame burn, maybe out near end of test. Ignition in ~9 sec. Small luminous flame quickly dim blue extinguishes in 4 sec. Vapor cloud 30 sec after hot-flame extinction. Re-ignition 50 sec after extinction.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J220",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J220. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H220",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H220. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Master Sheet!G220",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G220. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Master Sheet!F220",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F220. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E220",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E220. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-14",
     "quality": "reported",
     "raw": "2017-09-14 00:00:00",
     "column": "Master Sheet!B220",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B220. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1424",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1424",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 141,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool-flame burn",
     "column": "Comments!B221",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B221. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deployment on fiber. Ignition in ~13 sec. Luminous flame quickly turns dim blue in ~1 sec, extinguishes in ~4 sec. Small hot flame, close to droplet surface. Vapor cloud at ~30 sec. Long slow cool-flame burn. No residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J221",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J221. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B221",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B221. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment on fiber. Ignition in ~13 sec. Luminous flame quickly turns dim blue in ~1 sec, extinguishes in ~4 sec. Small hot flame, close to droplet surface. Vapor cloud at ~30 sec. Long slow cool-flame burn. No residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H221",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H221. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Master Sheet!G221",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G221. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Master Sheet!F221",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F221. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E221",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E221. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-14",
     "quality": "reported",
     "raw": "2017-09-14 00:00:00",
     "column": "Master Sheet!B221",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B221. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1425",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1425",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 142,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B222",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B222. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deployment on fiber. Ignition in ~8 sec. Luminous hot flame for 1 sec turns dim blue, extinguishes in ~5 sec. Large re-ignition ~7 sec after hot-flame extinction. Long cool flame burn with vapor cloud formed ~30 sec after hot flame extinction. No residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J222",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J222. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B222",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B222. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment on fiber. Ignition in ~8 sec. Luminous hot flame for 1 sec turns dim blue, extinguishes in ~5 sec. Large re-ignition ~7 sec after hot-flame extinction. Long cool flame burn with vapor cloud formed ~30 sec after hot flame extinction. No residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H222",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H222. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Master Sheet!G222",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G222. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Master Sheet!F222",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F222. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Master Sheet!E222",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E222. This is a setting, not a measurement. NASA gives 3 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-14",
     "quality": "reported",
     "raw": "2017-09-14 00:00:00",
     "column": "Master Sheet!B222",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B222. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1426",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1426",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 143,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B223",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B223. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deployment on fiber. Good ignition. Very limited cool flame burn. Large residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J223",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J223. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B223",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B223. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment on fiber. Good ignition. Very limited cool flame burn. Large residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H223",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H223. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Master Sheet!G223",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G223. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Master Sheet!F223",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F223. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E223",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E223. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-15",
     "quality": "reported",
     "raw": "2017-09-15 00:00:00",
     "column": "Master Sheet!B223",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B223. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1427",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1427",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 144,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J224",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J224. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "droplet",
     "column": "Comments!B224",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B224. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Good deployment on fiber. Translated droplet a little to center. Good ignition. Not much cool flame burning. Very quick vapor cloud formation.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H224",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H224. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Master Sheet!G224",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G224. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Master Sheet!F224",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F224. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E224",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E224. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-15",
     "quality": "reported",
     "raw": "2017-09-15 00:00:00",
     "column": "Master Sheet!B224",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B224. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1428",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1428",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 145,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B225",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B225. NASA's comment on this test says a cool flame burned.",
     "evidence": "Perfect deployment. Slow drift S during ignition. Droplet stays in FOV for entire burn. Good hot flame burn. Short cool flame burn. Large residual droplet.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J225",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J225. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "raw": "Droplet",
     "column": "Comments!B225",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B225. NASA's comment on this test calls the fuel a droplet, which is liquid.",
     "evidence": "Perfect deployment. Slow drift S during ignition. Droplet stays in FOV for entire burn. Good hot flame burn. Short cool flame burn. Large residual droplet.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H225",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H225. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Master Sheet!G225",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G225. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Master Sheet!F225",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F225. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E225",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E225. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-15",
     "quality": "reported",
     "raw": "2017-09-15 00:00:00",
     "column": "Master Sheet!B225",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B225. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1429",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1429",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 146,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J226",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J226. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H226",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H226. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Master Sheet!G226",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G226. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Master Sheet!F226",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F226. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E226",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E226. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-15",
     "quality": "reported",
     "raw": "2017-09-15 00:00:00",
     "column": "Master Sheet!B226",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B226. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1430",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1430",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 147,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burning",
     "column": "Comments!B227",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B227. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good ignition. Short hot-flame burn. Some cool flame burning.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J227",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J227. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H227",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H227. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Master Sheet!G227",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G227. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Master Sheet!F227",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F227. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E227",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E227. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-15",
     "quality": "reported",
     "raw": "2017-09-15 00:00:00",
     "column": "Master Sheet!B227",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B227. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi-new/1431",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "Flex 1431",
   "source_table": "PSI-39_Evidence pack_PSI-39",
   "source_row": 148,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool-flame burn",
     "column": "Comments!B228",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B228. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deployment on fiber. Good ignition. Good cool-flame burn.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "fuel": {
     "text": "Farnesane",
     "quality": "reported",
     "raw": "Farnesane",
     "column": "Master Sheet!J228",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!J228. NASA's column \"Fuel\" on the sheet \"Master Sheet\", exactly as written."
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Master Sheet!H228",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!H228. This is a setting, not a measurement. NASA's column \"Helium\" on the sheet \"Master Sheet\", the test's condition."
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Master Sheet!G228",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!G228. This is a setting, not a measurement. NASA's column \"Nitrogen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Master Sheet!F228",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!F228. This is a setting, not a measurement. NASA's column \"Oxygen\" on the sheet \"Master Sheet\", the test's condition."
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Master Sheet!E228",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!E228. This is a setting, not a measurement. NASA gives 1 atm; multiplied by 101.325. Listed as the test's condition on the sheet \"Master Sheet\"."
    },
    "test_date": {
     "text": "2017-09-15",
     "quality": "reported",
     "raw": "2017-09-15 00:00:00",
     "column": "Master Sheet!B228",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Master Sheet!B228. NASA's column \"Test Date\" on the sheet \"Master Sheet\"."
    }
   }
  },
  {
   "id": "PSI-39/cfi/1",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f068a03",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "ambient_temperature_c": {
     "min": 26.04,
     "max": 26.04,
     "quality": "reported",
     "raw": "299.19",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1206_TestSheet.txt, p. 1. NASA gives 299.19 K on the test sheet; 273.15 subtracted.",
     "evidence": "Temperature (K) = \t 299.19",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1206_TestSheet.txt"
    },
    "burning_rate_cool_mm2_s": {
     "min": 0.385,
     "max": 0.385,
     "quality": "reported",
     "raw": "0.385",
     "column": "DATA!E2",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E2. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.379,
     "max": 0.379,
     "quality": "reported",
     "raw": "0.379",
     "column": "DATA!D2",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D2. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B2",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B2. NASA's comment on this test says a cool flame burned.",
     "evidence": "Excellent deployment. Ignition just before igniters pull away. Droplet drifts W in color camera FOV but stays in FOV the entire time. Hot flame extinguishers without oscillations. Long cool flame burn with large vapor cloud. No evidence of cool flame extinction (droplet seems to disappear).",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "description": {
     "text": "Free-floating, stays in FOV.  Radiative extinction, cool-flame burning and extinction, large vapor cloud.",
     "quality": "context",
     "raw": "Free-floating, stays in FOV.  Radiative extinction, cool-flame burning and extinction, large vapor cloud.",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1206_TestSheet.txt, p. 1. NASA's COMMENTS paragraph on the test sheet, exactly as written.",
     "evidence": "Free-floating, stays in FOV.  Radiative extinction, cool-flame burning and extinction, large vapor cloud.",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1206_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.497,
     "max": 0.497,
     "quality": "reported",
     "raw": "0.497",
     "column": "DATA!F2",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F2. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.577,
     "max": 3.577,
     "quality": "reported",
     "raw": "3.577",
     "column": "DATA!C2",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C2. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1206_TestSheet.txt, p. 1. NASA's test sheet line \"Fiber:\", Yes or No.",
     "evidence": "Fiber: \tNo",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1206_TestSheet.txt"
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.039,
     "max": 4.039,
     "quality": "reported",
     "raw": "4.039",
     "column": "DATA!B2",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B2. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-03-09",
     "quality": "reported",
     "raw": "9-Mar-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/2",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f068a07",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "ambient_temperature_c": {
     "min": 26.88,
     "max": 26.88,
     "quality": "reported",
     "raw": "300.03",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1207_TestSheet.txt, p. 1. NASA gives 300.03 K on the test sheet; 273.15 subtracted.",
     "evidence": "Temperature (K) = \t 300.03",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1207_TestSheet.txt"
    },
    "burning_rate_cool_mm2_s": {
     "min": 0.378,
     "max": 0.378,
     "quality": "reported",
     "raw": "0.378",
     "column": "DATA!E3",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E3. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.338,
     "max": 0.338,
     "quality": "reported",
     "raw": "0.338",
     "column": "DATA!D3",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D3. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B3",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B3. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deployment on fiber. Only a little motion on the fiber. Short hot flame with no flame oscillations. Nice stable droplet behavior on fiber. Long cool flame burn with no large vapor cloud. No visible cool flame extinction (droplet disappears).",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "description": {
     "text": "Fiber-supported.  Radiative extinction, cool flame burning and extinction, large vapor cloud.",
     "quality": "context",
     "raw": "Fiber-supported.  Radiative extinction, cool flame burning and extinction, large vapor cloud.",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1207_TestSheet.txt, p. 1. NASA's COMMENTS paragraph on the test sheet, exactly as written.",
     "evidence": "Fiber-supported.  Radiative extinction, cool flame burning and extinction, large vapor cloud.",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1207_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 4.018,
     "max": 4.018,
     "quality": "reported",
     "raw": "4.018",
     "column": "DATA!C3",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C3. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1207_TestSheet.txt, p. 1. NASA's test sheet line \"Fiber:\", Yes or No.",
     "evidence": "Fiber: \tYes",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1207_TestSheet.txt"
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.35,
     "max": 4.35,
     "quality": "reported",
     "raw": "4.35",
     "column": "DATA!B3",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B3. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-03-09",
     "quality": "reported",
     "raw": "9-Mar-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/3",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f068a08",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 3,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "ambient_temperature_c": {
     "min": 27.03,
     "max": 27.03,
     "quality": "reported",
     "raw": "300.18",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1208_TestSheet.txt, p. 1. NASA gives 300.18 K on the test sheet; 273.15 subtracted.",
     "evidence": "Temperature (K) = \t 300.18",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1208_TestSheet.txt"
    },
    "burning_rate_cool_mm2_s": {
     "min": 0.396,
     "max": 0.396,
     "quality": "reported",
     "raw": "0.396",
     "column": "DATA!E4",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E4. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.36,
     "max": 0.36,
     "quality": "reported",
     "raw": "0.36",
     "column": "DATA!D4",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D4. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B4",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B4. NASA's comment on this test says a cool flame burned.",
     "evidence": "IPSUG did not switch to continuous mode. This means we will get almost no hot or cool flame data from the intensified camera. Burn almost identical to last test. Good deployment and ignition on fiber. No motion on fiber during test. Hot flame burns 5-10 sec before extinguishing with no oscillations. Long cool flame burn and large vapor cloud. No cool flame extinction evident - droplet burns to near completion.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "description": {
     "text": "Fiber-supported, radiative extinction, cool flame, large vapor cloud, no residual droplet.",
     "quality": "context",
     "raw": "Fiber-supported, radiative extinction, cool flame, large vapor cloud, no residual droplet.",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1208_TestSheet.txt, p. 1. NASA's COMMENTS paragraph on the test sheet, exactly as written.",
     "evidence": "Fiber-supported, radiative extinction, cool flame, large vapor cloud, no residual droplet.",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1208_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 3.759,
     "max": 3.759,
     "quality": "reported",
     "raw": "3.759",
     "column": "DATA!C4",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C4. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1208_TestSheet.txt, p. 1. NASA's test sheet line \"Fiber:\", Yes or No.",
     "evidence": "Fiber: \tYes",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1208_TestSheet.txt"
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.154,
     "max": 4.154,
     "quality": "reported",
     "raw": "4.154",
     "column": "DATA!B4",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B4. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-03-09",
     "quality": "reported",
     "raw": "9-Mar-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/4",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f068a09",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 4,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "ambient_temperature_c": {
     "min": 27.13,
     "max": 27.13,
     "quality": "reported",
     "raw": "300.28",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1209_TestSheet.txt, p. 1. NASA gives 300.28 K on the test sheet; 273.15 subtracted.",
     "evidence": "Temperature (K) = \t 300.28",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1209_TestSheet.txt"
    },
    "burning_rate_cool_mm2_s": {
     "min": 0.391,
     "max": 0.391,
     "quality": "reported",
     "raw": "0.391",
     "column": "DATA!E5",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E5. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.359,
     "max": 0.359,
     "quality": "reported",
     "raw": "0.359",
     "column": "DATA!D5",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D5. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B5",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B5. NASA's comment on this test says a cool flame burned.",
     "evidence": "IPSUG did not switch to continuous mode. This means we will not get any hot or cool flame images from the intensified camera. Burn almost identical to last test. Good deployment and ignition ob fiber. Very little droplet motion on fiber. 5-10 sec hot-flame burn with no oscilations. Long cool flame burn and large vapor cloud. Again no evidence of residual droplet after cool flame extinction.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "description": {
     "text": "Fiber-supported.  Radiative extinction, cool flame burning and large vapor cloud.",
     "quality": "context",
     "raw": "Fiber-supported.  Radiative extinction, cool flame burning and large vapor cloud.",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1209_TestSheet.txt, p. 1. NASA's COMMENTS paragraph on the test sheet, exactly as written.",
     "evidence": "Fiber-supported.  Radiative extinction, cool flame burning and large vapor cloud.",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1209_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 3.788,
     "max": 3.788,
     "quality": "reported",
     "raw": "3.788",
     "column": "DATA!C5",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C5. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1209_TestSheet.txt, p. 1. NASA's test sheet line \"Fiber:\", Yes or No.",
     "evidence": "Fiber: \tYes",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1209_TestSheet.txt"
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.19,
     "max": 4.19,
     "quality": "reported",
     "raw": "4.19",
     "column": "DATA!B5",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B5. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-03-09",
     "quality": "reported",
     "raw": "9-Mar-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/5",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f068a11",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 5,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "ambient_temperature_c": {
     "min": 27.21,
     "max": 27.21,
     "quality": "reported",
     "raw": "300.36",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1210_TestSheet.txt, p. 1. NASA gives 300.36 K on the test sheet; 273.15 subtracted.",
     "evidence": "Temperature (K) = \t 300.36",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1210_TestSheet.txt"
    },
    "burning_rate_cool_mm2_s": {
     "min": 0.383,
     "max": 0.383,
     "quality": "reported",
     "raw": "0.383",
     "column": "DATA!E6",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E6. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.403,
     "max": 0.403,
     "quality": "reported",
     "raw": "0.403",
     "column": "DATA!D6",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D6. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B6",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B6. NASA's comment on this test says a cool flame burned.",
     "evidence": "IPSUG did not switch to continuous mode. This means there will not be any visable hot or cool flame imagers from the intensified camera. Burn almost identical to last test. Good deployment and ignition on fiber. Very little droplet motion on fiber. 5-10 sec hot flame burn with no oscillations before extinction. Long cool flame burn and large vapor cloud. No evidence of residual droplet indicating cool flame extinction.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "description": {
     "text": "Free-floated, Radiative extinction, long cool-flame burn and extinction.  Vapor cloud.",
     "quality": "context",
     "raw": "Free-floated, Radiative extinction, long cool-flame burn and extinction.  Vapor cloud.",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1210_TestSheet.txt, p. 1. NASA's COMMENTS paragraph on the test sheet, exactly as written.",
     "evidence": "Free-floated, Radiative extinction, long cool-flame burn and extinction.  Vapor cloud.",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1210_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 3.28,
     "max": 3.28,
     "quality": "reported",
     "raw": "3.28",
     "column": "DATA!C6",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C6. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1210_TestSheet.txt, p. 1. NASA's test sheet line \"Fiber:\", Yes or No.",
     "evidence": "Fiber: \tYes",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1210_TestSheet.txt"
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 3.793,
     "max": 3.793,
     "quality": "reported",
     "raw": "3.793",
     "column": "DATA!B6",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B6. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-03-09",
     "quality": "reported",
     "raw": "9-Mar-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/6",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f080a01",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 6,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "ambient_temperature_c": {
     "min": 25.82,
     "max": 25.82,
     "quality": "reported",
     "raw": "298.97",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1211_TestSheet.txt, p. 1. NASA gives 298.97 K on the test sheet; 273.15 subtracted.",
     "evidence": "Temperature (K) = \t 298.97",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1211_TestSheet.txt"
    },
    "burning_rate_cool_mm2_s": {
     "min": 0.398,
     "max": 0.398,
     "quality": "reported",
     "raw": "0.398",
     "column": "DATA!E7",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E7. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.339,
     "max": 0.339,
     "quality": "reported",
     "raw": "0.339",
     "column": "DATA!D7",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D7. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool-flame burning",
     "column": "Comments!B7",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B7. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good fuel dispense. Good, clean fiber. Almost perfect ignition. No flame oscillations. Large vapor cloud forms during cool-flame burning. Cool flame extinction is not evident.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "description": {
     "text": "Fiber-supported.  Radiative extinction, long cool flame burn and large vapor cloud.",
     "quality": "context",
     "raw": "Fiber-supported.  Radiative extinction, long cool flame burn and large vapor cloud.",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1211_TestSheet.txt, p. 1. NASA's COMMENTS paragraph on the test sheet, exactly as written.",
     "evidence": "Fiber-supported.  Radiative extinction, long cool flame burn and large vapor cloud.",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1211_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.38,
     "max": 0.38,
     "quality": "reported",
     "raw": "0.38",
     "column": "DATA!F7",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F7. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.934,
     "max": 3.934,
     "quality": "reported",
     "raw": "3.934",
     "column": "DATA!C7",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C7. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1211_TestSheet.txt, p. 1. NASA's test sheet line \"Fiber:\", Yes or No.",
     "evidence": "Fiber: \tYes",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1211_TestSheet.txt"
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.268,
     "max": 4.268,
     "quality": "reported",
     "raw": "4.268",
     "column": "DATA!B7",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B7. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-03-21",
     "quality": "reported",
     "raw": "21-Mar-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/7",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f086a04",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 7,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "ambient_temperature_c": {
     "min": 26.69,
     "max": 26.69,
     "quality": "reported",
     "raw": "299.84",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1213_TestSheet.txt, p. 1. NASA gives 299.84 K on the test sheet; 273.15 subtracted.",
     "evidence": "Temperature (K) = \t 299.84",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1213_TestSheet.txt"
    },
    "burning_rate_cool_mm2_s": {
     "min": 0.359,
     "max": 0.359,
     "quality": "reported",
     "raw": "0.359",
     "column": "DATA!E9",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E9. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.189,
     "max": 0.189,
     "quality": "reported",
     "raw": "0.189",
     "column": "DATA!D9",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D9. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "Cool flame burning",
     "column": "Comments!B9",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B9. NASA's comment on this test says a cool flame burned.",
     "evidence": "I see delay between deploy and ignition. Using a fiber. As didn't work first time. Trying to work around. Deployed droplet on fiber manually. Deleted F086A03. Good deployment and ignition on fiber. Short burn to radiative extinction. Cool flame burning and vapor cloud. No residual droplet on fiber after test. Did droplet burn to completion?",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "description": {
     "text": "Fiber-supported.  Radiative extinction, long cool flame burn and large vapor cloud.",
     "quality": "context",
     "raw": "Fiber-supported.  Radiative extinction, long cool flame burn and large vapor cloud.",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1213_TestSheet.txt, p. 1. NASA's COMMENTS paragraph on the test sheet, exactly as written.",
     "evidence": "Fiber-supported.  Radiative extinction, long cool flame burn and large vapor cloud.",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1213_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 1.267,
     "max": 1.267,
     "quality": "reported",
     "raw": "1.267",
     "column": "DATA!F9",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F9. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.113,
     "max": 4.113,
     "quality": "reported",
     "raw": "4.113",
     "column": "DATA!C9",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C9. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1213_TestSheet.txt, p. 1. NASA's test sheet line \"Fiber:\", Yes or No.",
     "evidence": "Fiber: \tYes",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1213_TestSheet.txt"
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.189,
     "max": 4.189,
     "quality": "reported",
     "raw": "4.189",
     "column": "DATA!B9",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B9. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-03-27",
     "quality": "reported",
     "raw": "27-Mar-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/8",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f086a06",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 8,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "ambient_temperature_c": {
     "min": 27.09,
     "max": 27.09,
     "quality": "reported",
     "raw": "300.24",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1215_TestSheet.txt, p. 1. NASA gives 300.24 K on the test sheet; 273.15 subtracted.",
     "evidence": "Temperature (K) = \t 300.24",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1215_TestSheet.txt"
    },
    "burning_rate_cool_mm2_s": {
     "min": 0.345,
     "max": 0.345,
     "quality": "reported",
     "raw": "0.345",
     "column": "DATA!E11",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E11. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.163,
     "max": 0.163,
     "quality": "reported",
     "raw": "0.163",
     "column": "DATA!D11",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D11. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B11",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B11. NASA's comment on this test says a cool flame burned.",
     "evidence": "Using orignal igniter positions but higher power and longer time. Good deployment and ignition. Slow drift S after igniter witdraw. The droplet stayed in the FOV for most of the cool flame burn (6 see hot flame). It likely drifted out and recording ended before cool flame extinction ( ~40 dec in FOV). It looks like cool flame extinction at a small droplet diameter. Large vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "description": {
     "text": "Free-floated.  Radiative extinction, long cool flame burn to extinction and vapor cloud.",
     "quality": "context",
     "raw": "Free-floated.  Radiative extinction, long cool flame burn to extinction and vapor cloud.",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1215_TestSheet.txt, p. 1. NASA's COMMENTS paragraph on the test sheet, exactly as written.",
     "evidence": "Free-floated.  Radiative extinction, long cool flame burn to extinction and vapor cloud.",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1215_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 1.861,
     "max": 1.861,
     "quality": "reported",
     "raw": "1.861",
     "column": "DATA!F11",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F11. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.194,
     "max": 4.194,
     "quality": "reported",
     "raw": "4.194",
     "column": "DATA!C11",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C11. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1215_TestSheet.txt, p. 1. NASA's test sheet line \"Fiber:\", Yes or No.",
     "evidence": "Fiber: \tNo",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1215_TestSheet.txt"
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.289,
     "max": 4.289,
     "quality": "reported",
     "raw": "4.289",
     "column": "DATA!B11",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B11. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-03-27",
     "quality": "reported",
     "raw": "27-Mar-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/9",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f086a07",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 9,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_mm2_s": {
     "min": 0.313,
     "max": 0.313,
     "quality": "reported",
     "raw": "0.313",
     "column": "DATA!D12",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D12. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B12",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B12. NASA's comment on this test says a cool flame burned.",
     "evidence": "Droplet drifted hit lower igniter and drifted NW after igniter withdraw. Droplet drifted at a moderate speed, but stayed in FOV thru hot-flame extinction and well into cool flame burn. ~6 see hot flame burn. Oscillations at extinction.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 4.065,
     "max": 4.065,
     "quality": "reported",
     "raw": "4.065",
     "column": "DATA!C12",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C12. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.328,
     "max": 4.328,
     "quality": "reported",
     "raw": "4.328",
     "column": "DATA!B12",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B12. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-03-27",
     "quality": "reported",
     "raw": "27-Mar-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/10",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f086a08",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 10,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.344,
     "max": 0.344,
     "quality": "reported",
     "raw": "0.344",
     "column": "DATA!E13",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E13. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.331,
     "max": 0.331,
     "quality": "reported",
     "raw": "0.331",
     "column": "DATA!D13",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D13. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 2.868,
     "max": 2.868,
     "quality": "reported",
     "raw": "2.868",
     "column": "DATA!F13",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F13. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.817,
     "max": 3.817,
     "quality": "reported",
     "raw": "3.817",
     "column": "DATA!C13",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C13. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.027,
     "max": 4.027,
     "quality": "reported",
     "raw": "4.027",
     "column": "DATA!B13",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B13. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-03-27",
     "quality": "reported",
     "raw": "27-Mar-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/11",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f090a03",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 11,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "ambient_temperature_c": {
     "min": 26.52,
     "max": 26.52,
     "quality": "reported",
     "raw": "299.67",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1218_TestSheet.txt, p. 1. NASA gives 299.67 K on the test sheet; 273.15 subtracted.",
     "evidence": "Temperature (K) = \t 299.67",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1218_TestSheet.txt"
    },
    "burning_rate_cool_mm2_s": {
     "min": 0.398,
     "max": 0.398,
     "quality": "reported",
     "raw": "0.398",
     "column": "DATA!E14",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E14. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.371,
     "max": 0.371,
     "quality": "reported",
     "raw": "0.371",
     "column": "DATA!D14",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D14. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B14",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B14. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good, clear fuel - a little off-centered on fiber. Good deployment on the fiber. Good ignition right before igniters pulled away. 10 sec hot flame followed. Long cool flame burn with a large vapor cloud. Looks like there was no residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "description": {
     "text": "Fiber-supported.  Radiative extinction, cool flame burning and extinction, vapor cloud.",
     "quality": "context",
     "raw": "Fiber-supported.  Radiative extinction, cool flame burning and extinction, vapor cloud.",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1218_TestSheet.txt, p. 1. NASA's COMMENTS paragraph on the test sheet, exactly as written.",
     "evidence": "Fiber-supported.  Radiative extinction, cool flame burning and extinction, vapor cloud.",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1218_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.407,
     "max": 0.407,
     "quality": "reported",
     "raw": "0.407",
     "column": "DATA!F14",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F14. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.866,
     "max": 3.866,
     "quality": "reported",
     "raw": "3.866",
     "column": "DATA!C14",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C14. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1218_TestSheet.txt, p. 1. NASA's test sheet line \"Fiber:\", Yes or No.",
     "evidence": "Fiber: \tYes",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1218_TestSheet.txt"
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.283,
     "max": 4.283,
     "quality": "reported",
     "raw": "4.283",
     "column": "DATA!B14",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B14. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-03-31",
     "quality": "reported",
     "raw": "31-Mar-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/12",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f090a04",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 12,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_mm2_s": {
     "min": 0.243,
     "max": 0.243,
     "quality": "reported",
     "raw": "0.243",
     "column": "DATA!D15",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D15. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.76,
     "max": 0.76,
     "quality": "reported",
     "raw": "0.76",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.3,
     "max": 4.3,
     "quality": "reported",
     "raw": "4.3",
     "column": "DATA!B15",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B15. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-03-31",
     "quality": "reported",
     "raw": "31-Mar-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/13",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f090a05",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 13,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.76,
     "max": 0.76,
     "quality": "reported",
     "raw": "0.76",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "test_date": {
     "text": "2017-03-31",
     "quality": "reported",
     "raw": "31-Mar-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/14",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f090a06",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 14,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "ambient_temperature_c": {
     "min": 27.04,
     "max": 27.04,
     "quality": "reported",
     "raw": "300.19",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1221_TestSheet.txt, p. 1. NASA gives 300.19 K on the test sheet; 273.15 subtracted.",
     "evidence": "Temperature (K) = \t 300.19",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1221_TestSheet.txt"
    },
    "burning_rate_cool_mm2_s": {
     "min": 0.381,
     "max": 0.381,
     "quality": "reported",
     "raw": "0.381",
     "column": "DATA!E17",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E17. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.341,
     "max": 0.341,
     "quality": "reported",
     "raw": "0.341",
     "column": "DATA!D17",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D17. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "description": {
     "text": "Free-floated, stays in FOV.  Radiative extinction, cool flame burning and extinction, vapor cloud.",
     "quality": "context",
     "raw": "Free-floated, stays in FOV.  Radiative extinction, cool flame burning and extinction, vapor cloud.",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1221_TestSheet.txt, p. 1. NASA's COMMENTS paragraph on the test sheet, exactly as written.",
     "evidence": "Free-floated, stays in FOV.  Radiative extinction, cool flame burning and extinction, vapor cloud.",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1221_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "DATA!F17",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F17. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.95,
     "max": 3.95,
     "quality": "reported",
     "raw": "3.95",
     "column": "DATA!C17",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C17. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1221_TestSheet.txt, p. 1. NASA's test sheet line \"Fiber:\", Yes or No.",
     "evidence": "Fiber: \tNo",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1221_TestSheet.txt"
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.76,
     "max": 0.76,
     "quality": "reported",
     "raw": "0.76",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.346,
     "max": 4.346,
     "quality": "reported",
     "raw": "4.346",
     "column": "DATA!B17",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B17. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-03-31",
     "quality": "reported",
     "raw": "31-Mar-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/15",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f090a07",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 15,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_mm2_s": {
     "min": 0.645,
     "max": 0.645,
     "quality": "reported",
     "raw": "0.645",
     "column": "DATA!D18",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D18. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.76,
     "max": 0.76,
     "quality": "reported",
     "raw": "0.76",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.188,
     "max": 4.188,
     "quality": "reported",
     "raw": "4.188",
     "column": "DATA!B18",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B18. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-03-31",
     "quality": "reported",
     "raw": "31-Mar-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/16",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f090a08",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 16,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "ambient_temperature_c": {
     "min": 27.48,
     "max": 27.48,
     "quality": "reported",
     "raw": "300.63",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1223_TestSheet.txt, p. 1. NASA gives 300.63 K on the test sheet; 273.15 subtracted.",
     "evidence": "Temperature (K) = \t 300.63",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1223_TestSheet.txt"
    },
    "burning_rate_cool_mm2_s": {
     "min": 0.401,
     "max": 0.401,
     "quality": "reported",
     "raw": "0.401",
     "column": "DATA!E19",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E19. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.388,
     "max": 0.388,
     "quality": "reported",
     "raw": "0.388",
     "column": "DATA!D19",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D19. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "description": {
     "text": "Input comments about test here",
     "quality": "context",
     "raw": "Input comments about test here",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1223_TestSheet.txt, p. 1. NASA's COMMENTS paragraph on the test sheet, exactly as written.",
     "evidence": "Input comments about test here",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1223_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.392,
     "max": 0.392,
     "quality": "reported",
     "raw": "0.392",
     "column": "DATA!F19",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F19. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.627,
     "max": 3.627,
     "quality": "reported",
     "raw": "3.627",
     "column": "DATA!C19",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C19. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1223_TestSheet.txt, p. 1. NASA's test sheet line \"Fiber:\", Yes or No.",
     "evidence": "Fiber: \tNo",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1223_TestSheet.txt"
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 126.656,
     "max": 126.656,
     "quality": "reported",
     "raw": "1.25 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.04,
     "max": 4.04,
     "quality": "reported",
     "raw": "4.04",
     "column": "DATA!B19",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B19. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-03-31",
     "quality": "reported",
     "raw": "31-Mar-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/17",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f090a09",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 17,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_mm2_s": {
     "min": 0.516,
     "max": 0.516,
     "quality": "reported",
     "raw": "0.516",
     "column": "DATA!D20",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D20. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 2.866,
     "max": 2.866,
     "quality": "reported",
     "raw": "2.866",
     "column": "DATA!C20",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C20. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 126.656,
     "max": 126.656,
     "quality": "reported",
     "raw": "1.25 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.072,
     "max": 4.072,
     "quality": "reported",
     "raw": "4.072",
     "column": "DATA!B20",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B20. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-03-31",
     "quality": "reported",
     "raw": "31-Mar-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/18",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f090a10",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 18,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.405,
     "max": 0.405,
     "quality": "reported",
     "raw": "0.405",
     "column": "DATA!E21",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E21. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.402,
     "max": 0.402,
     "quality": "reported",
     "raw": "0.402",
     "column": "DATA!D21",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D21. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 3.549,
     "max": 3.549,
     "quality": "reported",
     "raw": "3.549",
     "column": "DATA!C21",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C21. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 126.656,
     "max": 126.656,
     "quality": "reported",
     "raw": "1.25 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.218,
     "max": 4.218,
     "quality": "reported",
     "raw": "4.218",
     "column": "DATA!B21",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B21. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-03-31",
     "quality": "reported",
     "raw": "31-Mar-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/19",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f090a11",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 19,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "ambient_temperature_c": {
     "min": 27.46,
     "max": 27.46,
     "quality": "reported",
     "raw": "300.61",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1226_TestSheet.txt, p. 1. NASA gives 300.61 K on the test sheet; 273.15 subtracted.",
     "evidence": "Temperature (K) = \t 300.61",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1226_TestSheet.txt"
    },
    "burning_rate_cool_mm2_s": {
     "min": 0.429,
     "max": 0.429,
     "quality": "reported",
     "raw": "0.429",
     "column": "DATA!E22",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E22. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.427,
     "max": 0.427,
     "quality": "reported",
     "raw": "0.427",
     "column": "DATA!D22",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D22. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B22",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B22. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deploymen on fiber. Minimal motion. Hot flame burned for ~10 sec and extinguished without oscillations. Long cool flame burn, no residual droplet and large vapor cloud.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "description": {
     "text": "Fiber-supported.  Higher sooting than 1 atm.  Radiative extinction, cool flame burning and vapor cloud.",
     "quality": "context",
     "raw": "Fiber-supported.  Higher sooting than 1 atm.  Radiative extinction, cool flame burning and vapor cloud.",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1226_TestSheet.txt, p. 1. NASA's COMMENTS paragraph on the test sheet, exactly as written.",
     "evidence": "Fiber-supported.  Higher sooting than 1 atm.  Radiative extinction, cool flame burning and vapor cloud.",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1226_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "DATA!F22",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F22. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.765,
     "max": 3.765,
     "quality": "reported",
     "raw": "3.765",
     "column": "DATA!C22",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C22. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-39_Raw Data_FLEX-1226_TestSheet.txt, p. 1. NASA's test sheet line \"Fiber:\", Yes or No.",
     "evidence": "Fiber: \tYes",
     "evidence_source": "file:PSI-39_Raw Data_FLEX-1226_TestSheet.txt"
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 126.656,
     "max": 126.656,
     "quality": "reported",
     "raw": "1.25 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.073,
     "max": 4.073,
     "quality": "reported",
     "raw": "4.073",
     "column": "DATA!B22",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B22. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-03-31",
     "quality": "reported",
     "raw": "31-Mar-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/20",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f095a01",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 20,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.437,
     "max": 0.437,
     "quality": "reported",
     "raw": "0.437",
     "column": "DATA!E23",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E23. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.399,
     "max": 0.399,
     "quality": "reported",
     "raw": "0.399",
     "column": "DATA!D23",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D23. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burning",
     "column": "Comments!B23",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B23. NASA's comment on this test says a cool flame burned.",
     "evidence": "First tests since software update to protect igniter. Good deployment onto the fiber. New ignition scheme worked perfectly. 8 sec igniter on time. Flame ignites in approximately 5 sec. Igniters immediately de-energize and pull away. Hot flame oscillations then extinguishes after 12 sec. 7 sec ater entinction hot flame re-ignites followed by another re-ignition then cool flame burning.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 3.473,
     "max": 3.473,
     "quality": "reported",
     "raw": "3.473",
     "column": "DATA!C23",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C23. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 202.65,
     "max": 202.65,
     "quality": "reported",
     "raw": "2 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 3.94,
     "max": 3.94,
     "quality": "reported",
     "raw": "3.94",
     "column": "DATA!B23",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B23. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-04-05",
     "quality": "reported",
     "raw": "5-Apr-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/21",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f095a02",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 21,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 202.65,
     "max": 202.65,
     "quality": "reported",
     "raw": "2 atm",
     "column": "Pressure"
    },
    "test_date": {
     "text": "2017-04-05",
     "quality": "reported",
     "raw": "5-Apr-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/22",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f095a04",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 22,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_mm2_s": {
     "min": 0.626,
     "max": 0.626,
     "quality": "reported",
     "raw": "0.626",
     "column": "DATA!D25",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D25. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 2.773,
     "max": 2.773,
     "quality": "reported",
     "raw": "2.773",
     "column": "DATA!C25",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C25. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane",
     "quality": "reported",
     "raw": "C12H26",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 202.65,
     "max": 202.65,
     "quality": "reported",
     "raw": "2 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.107,
     "max": 4.107,
     "quality": "reported",
     "raw": "4.107",
     "column": "DATA!B25",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B25. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-04-05",
     "quality": "reported",
     "raw": "5-Apr-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/23",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f173e01",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 23,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.572,
     "max": 0.572,
     "quality": "reported",
     "raw": "0.572",
     "column": "DATA!E82",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E82. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.108,
     "max": 0.108,
     "quality": "reported",
     "raw": "0.108",
     "column": "DATA!D82",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D82. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 4.348,
     "max": 4.348,
     "quality": "reported",
     "raw": "4.348",
     "column": "DATA!F82",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F82. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.374,
     "max": 4.374,
     "quality": "reported",
     "raw": "4.374",
     "column": "DATA!C82",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C82. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.41,
     "max": 4.41,
     "quality": "reported",
     "raw": "4.41",
     "column": "DATA!B82",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B82. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-22",
     "quality": "reported",
     "raw": "22-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/24",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f173e02",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 24,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_mm2_s": {
     "min": 0.073,
     "max": 0.073,
     "quality": "reported",
     "raw": "0.073",
     "column": "DATA!D83",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D83. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 5.489,
     "max": 5.489,
     "quality": "reported",
     "raw": "5.489",
     "column": "DATA!C83",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C83. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 5.499,
     "max": 5.499,
     "quality": "reported",
     "raw": "5.499",
     "column": "DATA!B83",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B83. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-22",
     "quality": "reported",
     "raw": "22-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/25",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f173e03",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 25,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_mm2_s": {
     "min": 0.119,
     "max": 0.119,
     "quality": "reported",
     "raw": "0.119",
     "column": "DATA!D84",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D84. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 4.29,
     "max": 4.29,
     "quality": "reported",
     "raw": "4.29",
     "column": "DATA!C84",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C84. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.338,
     "max": 4.338,
     "quality": "reported",
     "raw": "4.338",
     "column": "DATA!B84",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B84. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-22",
     "quality": "reported",
     "raw": "22-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/26",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f173e05",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 26,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_mm2_s": {
     "min": 0.075,
     "max": 0.075,
     "quality": "reported",
     "raw": "0.075",
     "column": "DATA!D85",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D85. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 5.619,
     "max": 5.619,
     "quality": "reported",
     "raw": "5.619",
     "column": "DATA!C85",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C85. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 5.671,
     "max": 5.671,
     "quality": "reported",
     "raw": "5.671",
     "column": "DATA!B85",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B85. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-22",
     "quality": "reported",
     "raw": "22-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/27",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f173e06",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 27,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_mm2_s": {
     "min": 0.001,
     "max": 0.001,
     "quality": "reported",
     "raw": "0.001",
     "column": "DATA!D86",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D86. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 5.703,
     "max": 5.703,
     "quality": "reported",
     "raw": "5.703",
     "column": "DATA!C86",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C86. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 5.704,
     "max": 5.704,
     "quality": "reported",
     "raw": "5.704",
     "column": "DATA!B86",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B86. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-22",
     "quality": "reported",
     "raw": "22-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/28",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f179e01",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 28,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.365,
     "max": 0.365,
     "quality": "reported",
     "raw": "0.365",
     "column": "DATA!E92",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E92. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.309,
     "max": 0.309,
     "quality": "reported",
     "raw": "0.309",
     "column": "DATA!D92",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D92. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 3.908,
     "max": 3.908,
     "quality": "reported",
     "raw": "3.908",
     "column": "DATA!C92",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C92. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.2,
     "max": 4.2,
     "quality": "reported",
     "raw": "4.2",
     "column": "DATA!B92",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B92. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-28",
     "quality": "reported",
     "raw": "28-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/29",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f179e02",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 29,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.346,
     "max": 0.346,
     "quality": "reported",
     "raw": "0.346",
     "column": "DATA!E93",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E93. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.223,
     "max": 0.223,
     "quality": "reported",
     "raw": "0.223",
     "column": "DATA!D93",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D93. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 1.299,
     "max": 1.299,
     "quality": "reported",
     "raw": "1.299",
     "column": "DATA!F93",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F93. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 5.239,
     "max": 5.239,
     "quality": "reported",
     "raw": "5.239",
     "column": "DATA!C93",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C93. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 5.36,
     "max": 5.36,
     "quality": "reported",
     "raw": "5.36",
     "column": "DATA!B93",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B93. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-28",
     "quality": "reported",
     "raw": "28-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/30",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f179e05",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 30,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.354,
     "max": 0.354,
     "quality": "reported",
     "raw": "0.354",
     "column": "DATA!E94",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E94. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.307,
     "max": 0.307,
     "quality": "reported",
     "raw": "0.307",
     "column": "DATA!D94",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D94. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B94",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B94. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good, clear fuel on dispense. Lost droplet to upper needle. Some bubbles during dispense. Still on droplet surface when AS starts. Slow drift SW to lower igniter. Drift continues after igniters pull away. Droplet leaves FOV during cool flame burn, but will keep test point. Droplet bruns to completion or very small size with cool flame in ~30 sec.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.252,
     "max": 0.252,
     "quality": "reported",
     "raw": "0.252",
     "column": "DATA!F94",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F94. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.933,
     "max": 3.933,
     "quality": "reported",
     "raw": "3.933",
     "column": "DATA!C94",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C94. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.232,
     "max": 4.232,
     "quality": "reported",
     "raw": "4.232",
     "column": "DATA!B94",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B94. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-28",
     "quality": "reported",
     "raw": "28-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/31",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f177d01",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 31,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_mm2_s": {
     "min": 0.156,
     "max": 0.156,
     "quality": "reported",
     "raw": "0.156",
     "column": "DATA!D87",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D87. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 4.297,
     "max": 4.297,
     "quality": "reported",
     "raw": "4.297",
     "column": "DATA!C87",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C87. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.335,
     "max": 4.335,
     "quality": "reported",
     "raw": "4.335",
     "column": "DATA!B87",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B87. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-26",
     "quality": "reported",
     "raw": "26-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/32",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f177d02",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 32,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_mm2_s": {
     "min": 0.048,
     "max": 0.048,
     "quality": "reported",
     "raw": "0.048",
     "column": "DATA!D88",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D88. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 5.226,
     "max": 5.226,
     "quality": "reported",
     "raw": "5.226",
     "column": "DATA!C88",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C88. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 5.245,
     "max": 5.245,
     "quality": "reported",
     "raw": "5.245",
     "column": "DATA!B88",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B88. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-26",
     "quality": "reported",
     "raw": "26-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/33",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f177d03",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 33,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_mm2_s": {
     "min": 0.136,
     "max": 0.136,
     "quality": "reported",
     "raw": "0.136",
     "column": "DATA!D89",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D89. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 4.258,
     "max": 4.258,
     "quality": "reported",
     "raw": "4.258",
     "column": "DATA!C89",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C89. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.293,
     "max": 4.293,
     "quality": "reported",
     "raw": "4.293",
     "column": "DATA!B89",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B89. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-26",
     "quality": "reported",
     "raw": "26-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/34",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f177d04",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 34,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_mm2_s": {
     "min": 0.008,
     "max": 0.008,
     "quality": "reported",
     "raw": "0.008",
     "column": "DATA!D90",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D90. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 5.406,
     "max": 5.406,
     "quality": "reported",
     "raw": "5.406",
     "column": "DATA!C90",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C90. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 5.423,
     "max": 5.423,
     "quality": "reported",
     "raw": "5.423",
     "column": "DATA!B90",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B90. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-26",
     "quality": "reported",
     "raw": "26-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/35",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f177d05",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 35,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_mm2_s": {
     "min": 0.095,
     "max": 0.095,
     "quality": "reported",
     "raw": "0.095",
     "column": "DATA!D91",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D91. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 6.415,
     "max": 6.415,
     "quality": "reported",
     "raw": "6.415",
     "column": "DATA!C91",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C91. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 6.447,
     "max": 6.447,
     "quality": "reported",
     "raw": "6.447",
     "column": "DATA!B91",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B91. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-26",
     "quality": "reported",
     "raw": "26-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/36",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f180d01",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 36,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.354,
     "max": 0.354,
     "quality": "reported",
     "raw": "0.354",
     "column": "DATA!E97",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E97. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.34,
     "max": 0.34,
     "quality": "reported",
     "raw": "0.34",
     "column": "DATA!D97",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D97. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 3.989,
     "max": 3.989,
     "quality": "reported",
     "raw": "3.989",
     "column": "DATA!C97",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C97. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.25,
     "max": 4.25,
     "quality": "reported",
     "raw": "4.25",
     "column": "DATA!B97",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B97. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-06-29",
     "quality": "reported",
     "raw": "29-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/37",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f180d02",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 37,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.315,
     "max": 0.315,
     "quality": "reported",
     "raw": "0.315",
     "column": "DATA!E98",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E98. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.172,
     "max": 0.172,
     "quality": "reported",
     "raw": "0.172",
     "column": "DATA!D98",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D98. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 4.83,
     "max": 4.83,
     "quality": "reported",
     "raw": "4.83",
     "column": "DATA!F98",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F98. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 5.226,
     "max": 5.226,
     "quality": "reported",
     "raw": "5.226",
     "column": "DATA!C98",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C98. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 5.325,
     "max": 5.325,
     "quality": "reported",
     "raw": "5.325",
     "column": "DATA!B98",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B98. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-29",
     "quality": "reported",
     "raw": "29-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/38",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f186d01",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 38,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.36,
     "max": 0.36,
     "quality": "reported",
     "raw": "0.36",
     "column": "DATA!E107",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E107. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.229,
     "max": 0.229,
     "quality": "reported",
     "raw": "0.229",
     "column": "DATA!D107",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D107. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B107",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B107. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good, clear fuel, no bubbles. Good deployment on fiber with minimal oscillations. Droplet ignites with luminous yellow flame in ~7 sec. Flame becomes dim blue in ~4 sec and oscillates and extinguishes in ~9 sec. Long and slow cool flame burn with no residual droplet on fiber. Vapor cloud starts forming ~17 sec after hot-flame extinction.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 4.114,
     "max": 4.114,
     "quality": "reported",
     "raw": "4.114",
     "column": "DATA!C107",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C107. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 126.656,
     "max": 126.656,
     "quality": "reported",
     "raw": "1.25 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.345,
     "max": 4.345,
     "quality": "reported",
     "raw": "4.345",
     "column": "DATA!B107",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B107. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-05",
     "quality": "reported",
     "raw": "5-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/39",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f186d02",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 39,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.349,
     "max": 0.349,
     "quality": "reported",
     "raw": "0.349",
     "column": "DATA!E108",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E108. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.176,
     "max": 0.176,
     "quality": "reported",
     "raw": "0.176",
     "column": "DATA!D108",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D108. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B108",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B108. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deployment on fiber. After igniters turn on fiber appears to slacken and shift about on droplet diameter N. After hot-flame extinction it shifts S back to starting position. Ignition with luminous flame in ~8 sec. Flame becomes dim blue in ~3 sec and extinguishes in ~6 sec w/ oscillations. Long, slow cool flame burn w/ vapor cloud forming ~17 sec after hot-flame extinction.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 0.342,
     "max": 0.342,
     "quality": "reported",
     "raw": "0.342",
     "column": "DATA!F108",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F108. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 5.227,
     "max": 5.227,
     "quality": "reported",
     "raw": "5.227",
     "column": "DATA!C108",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C108. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 126.656,
     "max": 126.656,
     "quality": "reported",
     "raw": "1.25 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 5.261,
     "max": 5.261,
     "quality": "reported",
     "raw": "5.261",
     "column": "DATA!B108",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B108. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-05",
     "quality": "reported",
     "raw": "5-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/40",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f186d04",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 40,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.354,
     "max": 0.354,
     "quality": "reported",
     "raw": "0.354",
     "column": "DATA!E109",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E109. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.489,
     "max": 0.489,
     "quality": "reported",
     "raw": "0.489",
     "column": "DATA!D109",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D109. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 3.866,
     "max": 3.866,
     "quality": "reported",
     "raw": "3.866",
     "column": "DATA!C109",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C109. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 126.656,
     "max": 126.656,
     "quality": "reported",
     "raw": "1.25 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.182,
     "max": 4.182,
     "quality": "reported",
     "raw": "4.182",
     "column": "DATA!B109",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B109. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-05",
     "quality": "reported",
     "raw": "5-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/41",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f186d05",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 41,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B110",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B110. NASA's comment on this test says a cool flame burned.",
     "evidence": "Reset IPSU-G. Slow drift S to lower igniter. Similar flame behavior to previous tests. Slow drift SE leaves HiBMS FOV part way into cool flame burn. Stays in color camera FOV for entire test. Estimate of droplet size from color camera?",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 126.656,
     "max": 126.656,
     "quality": "reported",
     "raw": "1.25 atm",
     "column": "Pressure"
    },
    "test_date": {
     "text": "2017-07-05",
     "quality": "reported",
     "raw": "5-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/42",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f186d06",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 42,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.313,
     "max": 0.313,
     "quality": "reported",
     "raw": "0.313",
     "column": "DATA!E111",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E111. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.228,
     "max": 0.228,
     "quality": "reported",
     "raw": "0.228",
     "column": "DATA!D111",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D111. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burning",
     "column": "Comments!B111",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B111. NASA's comment on this test says a cool flame burned.",
     "evidence": "Trying a 5 mm droplet. Near perfect deployment. Very slow drift E during ignition. Similar hot flame and cool flame behavior to previous tests. Droplet stayed in FOV for hot flame and most of cool flame burning. Probably didn't capture cool flame extinction.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 5.254,
     "max": 5.254,
     "quality": "reported",
     "raw": "5.254",
     "column": "DATA!C111",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C111. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 126.656,
     "max": 126.656,
     "quality": "reported",
     "raw": "1.25 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 5.329,
     "max": 5.329,
     "quality": "reported",
     "raw": "5.329",
     "column": "DATA!B111",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B111. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-05",
     "quality": "reported",
     "raw": "5-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/43",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f191d02",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 43,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.399,
     "max": 0.399,
     "quality": "reported",
     "raw": "0.399",
     "column": "DATA!E117",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E117. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.248,
     "max": 0.248,
     "quality": "reported",
     "raw": "0.248",
     "column": "DATA!D117",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D117. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 4.337,
     "max": 4.337,
     "quality": "reported",
     "raw": "4.337",
     "column": "DATA!C117",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C117. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 202.65,
     "max": 202.65,
     "quality": "reported",
     "raw": "2 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.684,
     "max": 4.684,
     "quality": "reported",
     "raw": "4.684",
     "column": "DATA!B117",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B117. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-10",
     "quality": "reported",
     "raw": "10-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/44",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f191d03",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 44,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.378,
     "max": 0.378,
     "quality": "reported",
     "raw": "0.378",
     "column": "DATA!E118",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E118. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.223,
     "max": 0.223,
     "quality": "reported",
     "raw": "0.223",
     "column": "DATA!D118",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D118. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 4.377,
     "max": 4.377,
     "quality": "reported",
     "raw": "4.377",
     "column": "DATA!C118",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C118. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 202.65,
     "max": 202.65,
     "quality": "reported",
     "raw": "2 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.654,
     "max": 4.654,
     "quality": "reported",
     "raw": "4.654",
     "column": "DATA!B118",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B118. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-10",
     "quality": "reported",
     "raw": "10-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/45",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f191d04",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 45,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.403,
     "max": 0.403,
     "quality": "reported",
     "raw": "0.403",
     "column": "DATA!E119",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E119. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.331,
     "max": 0.331,
     "quality": "reported",
     "raw": "0.331",
     "column": "DATA!D119",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D119. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 4.25,
     "max": 4.25,
     "quality": "reported",
     "raw": "4.25",
     "column": "DATA!C119",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C119. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 202.65,
     "max": 202.65,
     "quality": "reported",
     "raw": "2 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.554,
     "max": 4.554,
     "quality": "reported",
     "raw": "4.554",
     "column": "DATA!B119",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B119. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-10",
     "quality": "reported",
     "raw": "10-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/46",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f191d05",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 46,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.413,
     "max": 0.413,
     "quality": "reported",
     "raw": "0.413",
     "column": "DATA!E120",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E120. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.259,
     "max": 0.259,
     "quality": "reported",
     "raw": "0.259",
     "column": "DATA!D120",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D120. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 4.732,
     "max": 4.732,
     "quality": "reported",
     "raw": "4.732",
     "column": "DATA!C120",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C120. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 202.65,
     "max": 202.65,
     "quality": "reported",
     "raw": "2 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.857,
     "max": 4.857,
     "quality": "reported",
     "raw": "4.857",
     "column": "DATA!B120",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B120. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-10",
     "quality": "reported",
     "raw": "10-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/47",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f195d01",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 47,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.357,
     "max": 0.357,
     "quality": "reported",
     "raw": "0.357",
     "column": "DATA!E125",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E125. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.177,
     "max": 0.177,
     "quality": "reported",
     "raw": "0.177",
     "column": "DATA!D125",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D125. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B125",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B125. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deployment on fiber, not much motion. Good ignition in ~8 sec. Luminous yellow flame quickly turns dim blue, oscillates and extinguishes in ~4 sec. Vapor cloud visible at ~18 sec after hot-flame extinction. Very long cool flame burn. Huge re-ignition ~50 sec after hot flame extinguishes. Can see re-ignition propagate on color camera.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 4.497,
     "max": 4.497,
     "quality": "reported",
     "raw": "4.497",
     "column": "DATA!C125",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C125. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.377,
     "max": 4.377,
     "quality": "reported",
     "raw": "4.377",
     "column": "DATA!B125",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B125. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-14",
     "quality": "reported",
     "raw": "14-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/48",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f195d02",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 48,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.322,
     "max": 0.322,
     "quality": "reported",
     "raw": "0.322",
     "column": "DATA!E126",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E126. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.034,
     "max": 0.034,
     "quality": "reported",
     "raw": "0.034",
     "column": "DATA!D126",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D126. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B126",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B126. NASA's comment on this test says a cool flame burned.",
     "evidence": "Good deployment on fiber. Some oscillations between igniters as igniters turn on, but stabilizes between them. Good ignition in ~10 sec. Luminous yellow flame quickly becomes dim blue, oscillates and extinguishes in ~4 sec. Very long and slow cool flame burn. Droplet bruns to completion in ~75 sec (after hot-flame extinction). Vapor cloud starts to form ~20 sec after extinction. No re-ignition.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 5.589,
     "max": 5.589,
     "quality": "reported",
     "raw": "5.589",
     "column": "DATA!C126",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C126. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 5.555,
     "max": 5.555,
     "quality": "reported",
     "raw": "5.555",
     "column": "DATA!B126",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B126. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-14",
     "quality": "reported",
     "raw": "14-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/49",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f195d07",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 49,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.388,
     "max": 0.388,
     "quality": "reported",
     "raw": "0.388",
     "column": "DATA!E127",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E127. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.096,
     "max": 0.096,
     "quality": "reported",
     "raw": "0.096",
     "column": "DATA!D127",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D127. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B127",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B127. NASA's comment on this test says a cool flame burned.",
     "evidence": "Lost first droplet to lower needle. Droplet moves slightly W after deployment but stabilizes. Good ignition in ~8 sec. Luminous yellow flame quickly turns dim blue, oscillates and extinguishes in ~4 sec. Long slow cool flame burn. Vapor cloud ~20 sec after hot-flame extinction. Huge re-ignition ~40 sec after extinction.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 4.005,
     "max": 4.005,
     "quality": "reported",
     "raw": "4.005",
     "column": "DATA!C127",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C127. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.103,
     "max": 4.103,
     "quality": "reported",
     "raw": "4.103",
     "column": "DATA!B127",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B127. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-14",
     "quality": "reported",
     "raw": "14-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/50",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f195d10",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 50,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.021,
     "max": 0.021,
     "quality": "reported",
     "raw": "0.021",
     "column": "DATA!E128",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E128. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.088,
     "max": 0.088,
     "quality": "reported",
     "raw": "0.088",
     "column": "DATA!D128",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D128. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 5.23,
     "max": 5.23,
     "quality": "reported",
     "raw": "5.23",
     "column": "DATA!C128",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C128. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 5.193,
     "max": 5.193,
     "quality": "reported",
     "raw": "5.193",
     "column": "DATA!B128",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B128. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-14",
     "quality": "reported",
     "raw": "14-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/51",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f195d11",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 51,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "DATA!E129",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E129. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.07,
     "max": 0.07,
     "quality": "reported",
     "raw": "0.07",
     "column": "DATA!D129",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D129. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B129",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B129. NASA's comment on this test says a cool flame burned.",
     "evidence": "Using residual droplet. Almost no hot-flame luminosity. Hot-flame oscilates and extinguishes ~3 sec. Vapor cloud at ~20 sec. Long, slow cool flame burn with no re-ignition.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 4.944,
     "max": 4.944,
     "quality": "reported",
     "raw": "4.944",
     "column": "DATA!C129",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C129. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.931,
     "max": 4.931,
     "quality": "reported",
     "raw": "4.931",
     "column": "DATA!B129",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B129. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-14",
     "quality": "reported",
     "raw": "14-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/52",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f200d01",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 52,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.455,
     "max": 0.455,
     "quality": "reported",
     "raw": "0.455",
     "column": "DATA!E132",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E132. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.238,
     "max": 0.238,
     "quality": "reported",
     "raw": "0.238",
     "column": "DATA!D132",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D132. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 4.291,
     "max": 4.291,
     "quality": "reported",
     "raw": "4.291",
     "column": "DATA!C132",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C132. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.593,
     "max": 4.593,
     "quality": "reported",
     "raw": "4.593",
     "column": "DATA!B132",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B132. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-19",
     "quality": "reported",
     "raw": "19-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/53",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f200d03",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 53,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.395,
     "max": 0.395,
     "quality": "reported",
     "raw": "0.395",
     "column": "DATA!E133",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E133. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.133,
     "max": 0.133,
     "quality": "reported",
     "raw": "0.133",
     "column": "DATA!D133",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D133. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 5.115,
     "max": 5.115,
     "quality": "reported",
     "raw": "5.115",
     "column": "DATA!C133",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C133. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 5.228,
     "max": 5.228,
     "quality": "reported",
     "raw": "5.228",
     "column": "DATA!B133",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B133. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-19",
     "quality": "reported",
     "raw": "19-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/54",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f200d04",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 54,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.474,
     "max": 0.474,
     "quality": "reported",
     "raw": "0.474",
     "column": "DATA!E134",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E134. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.367,
     "max": 0.367,
     "quality": "reported",
     "raw": "0.367",
     "column": "DATA!D134",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D134. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 3.839,
     "max": 3.839,
     "quality": "reported",
     "raw": "3.839",
     "column": "DATA!C134",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C134. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.318,
     "max": 4.318,
     "quality": "reported",
     "raw": "4.318",
     "column": "DATA!B134",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B134. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-19",
     "quality": "reported",
     "raw": "19-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/55",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f200d05",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 55,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.383,
     "max": 0.383,
     "quality": "reported",
     "raw": "0.383",
     "column": "DATA!E135",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E135. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.148,
     "max": 0.148,
     "quality": "reported",
     "raw": "0.148",
     "column": "DATA!D135",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D135. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B135",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B135. NASA's comment on this test says a cool flame burned.",
     "evidence": "Try to re-set motion controller. Good deployment on fiber. Droplet nicely centered. Ignition in ~10 sec w/ luminous yellow flame. Turns dim blue, oscillates and extinguished. Hot flame extinguishes in ~10 sec. Faint image visible in color camera. Long cool flame burn for 30 sec to huge re-ignition that dislodges droplet from fiber. Dislodged droplet drifts, burns w/ hot flame and out of FOV.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 5.201,
     "max": 5.201,
     "quality": "reported",
     "raw": "5.201",
     "column": "DATA!C135",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C135. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 5.334,
     "max": 5.334,
     "quality": "reported",
     "raw": "5.334",
     "column": "DATA!B135",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B135. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-19",
     "quality": "reported",
     "raw": "19-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/56",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f202e02",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 56,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "DATA!E137",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E137. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.385,
     "max": 0.385,
     "quality": "reported",
     "raw": "0.385",
     "column": "DATA!D137",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D137. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 4.972,
     "max": 4.972,
     "quality": "reported",
     "raw": "4.972",
     "column": "DATA!C137",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C137. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 506.625,
     "max": 506.625,
     "quality": "reported",
     "raw": "5 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 5.668,
     "max": 5.668,
     "quality": "reported",
     "raw": "5.668",
     "column": "DATA!B137",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B137. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-21",
     "quality": "reported",
     "raw": "21-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/57",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f205d01",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 57,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.505,
     "max": 0.505,
     "quality": "reported",
     "raw": "0.505",
     "column": "DATA!E138",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E138. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.709,
     "max": 0.709,
     "quality": "reported",
     "raw": "0.709",
     "column": "DATA!D138",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D138. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 3.885,
     "max": 3.885,
     "quality": "reported",
     "raw": "3.885",
     "column": "DATA!C138",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C138. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 506.625,
     "max": 506.625,
     "quality": "reported",
     "raw": "5 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.486,
     "max": 4.486,
     "quality": "reported",
     "raw": "4.486",
     "column": "DATA!B138",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B138. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-24",
     "quality": "reported",
     "raw": "24-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/58",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f205d02",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 58,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.459,
     "max": 0.459,
     "quality": "reported",
     "raw": "0.459",
     "column": "DATA!E139",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E139. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.562,
     "max": 0.562,
     "quality": "reported",
     "raw": "0.562",
     "column": "DATA!D139",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D139. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 5.029,
     "max": 5.029,
     "quality": "reported",
     "raw": "5.029",
     "column": "DATA!C139",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C139. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 506.625,
     "max": 506.625,
     "quality": "reported",
     "raw": "5 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 5.253,
     "max": 5.253,
     "quality": "reported",
     "raw": "5.253",
     "column": "DATA!B139",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B139. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-24",
     "quality": "reported",
     "raw": "24-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/59",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f208d01",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 59,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.201,
     "max": 0.201,
     "quality": "reported",
     "raw": "0.201",
     "column": "DATA!E143",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E143. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.367,
     "max": 0.367,
     "quality": "reported",
     "raw": "0.367",
     "column": "DATA!D143",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D143. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool-flame burning",
     "column": "Comments!B143",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B143. NASA's comment on this test says a cool flame burned.",
     "evidence": "Lost first droplet to lower needle. Good deployment on fiber - Almost no motion. Good ignition, minimal motion. Large soot agglomerate in droplet. Luminous yellow flame becomes dim blue. Hot flame extinguishes with no oscillations. Vapor cloud starts to form quickly close to droplet. Minimal cool-flame burning? Large residual droplet on fiber.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 3.754,
     "max": 3.754,
     "quality": "reported",
     "raw": "3.754",
     "column": "DATA!F143",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F143. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 3.847,
     "max": 3.847,
     "quality": "reported",
     "raw": "3.847",
     "column": "DATA!C143",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C143. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 75.9938,
     "max": 75.9938,
     "quality": "reported",
     "raw": "0.75 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.173,
     "max": 4.173,
     "quality": "reported",
     "raw": "4.173",
     "column": "DATA!B143",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B143. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-27",
     "quality": "reported",
     "raw": "27-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/60",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f208d02",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 60,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.097,
     "max": 0.097,
     "quality": "reported",
     "raw": "0.097",
     "column": "DATA!E144",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E144. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.205,
     "max": 0.205,
     "quality": "reported",
     "raw": "0.205",
     "column": "DATA!D144",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D144. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 5.189,
     "max": 5.189,
     "quality": "reported",
     "raw": "5.189",
     "column": "DATA!F144",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F144. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 5.236,
     "max": 5.236,
     "quality": "reported",
     "raw": "5.236",
     "column": "DATA!C144",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C144. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 75.9938,
     "max": 75.9938,
     "quality": "reported",
     "raw": "0.75 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 5.345,
     "max": 5.345,
     "quality": "reported",
     "raw": "5.345",
     "column": "DATA!B144",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B144. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-27",
     "quality": "reported",
     "raw": "27-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/61",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f208d03",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 61,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.174,
     "max": 0.174,
     "quality": "reported",
     "raw": "0.174",
     "column": "DATA!E145",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E145. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.209,
     "max": 0.209,
     "quality": "reported",
     "raw": "0.209",
     "column": "DATA!D145",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D145. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 5.233,
     "max": 5.233,
     "quality": "reported",
     "raw": "5.233",
     "column": "DATA!F145",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F145. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 5.283,
     "max": 5.283,
     "quality": "reported",
     "raw": "5.283",
     "column": "DATA!C145",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C145. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 75.9938,
     "max": 75.9938,
     "quality": "reported",
     "raw": "0.75 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 5.367,
     "max": 5.367,
     "quality": "reported",
     "raw": "5.367",
     "column": "DATA!B145",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B145. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-27",
     "quality": "reported",
     "raw": "27-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/62",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f208d04",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 62,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_mm2_s": {
     "min": 0.136,
     "max": 0.136,
     "quality": "reported",
     "raw": "0.136",
     "column": "DATA!D146",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D146. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 6.303,
     "max": 6.303,
     "quality": "reported",
     "raw": "6.303",
     "column": "DATA!C146",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C146. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 75.9938,
     "max": 75.9938,
     "quality": "reported",
     "raw": "0.75 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 6.312,
     "max": 6.312,
     "quality": "reported",
     "raw": "6.312",
     "column": "DATA!B146",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B146. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-07-27",
     "quality": "reported",
     "raw": "27-Jul-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/63",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f213d02",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 63,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.116,
     "max": 0.116,
     "quality": "reported",
     "raw": "0.116",
     "column": "DATA!E153",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E153. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.252,
     "max": 0.252,
     "quality": "reported",
     "raw": "0.252",
     "column": "DATA!D153",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D153. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 4.867,
     "max": 4.867,
     "quality": "reported",
     "raw": "4.867",
     "column": "DATA!F153",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F153. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.897,
     "max": 4.897,
     "quality": "reported",
     "raw": "4.897",
     "column": "DATA!C153",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C153. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 50.6625,
     "quality": "reported",
     "raw": "0.5 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 5.097,
     "max": 5.097,
     "quality": "reported",
     "raw": "5.097",
     "column": "DATA!B153",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B153. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-08-01",
     "quality": "reported",
     "raw": "1-Aug-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/64",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f213d03",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 64,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_mm2_s": {
     "min": 0.292,
     "max": 0.292,
     "quality": "reported",
     "raw": "0.292",
     "column": "DATA!D154",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D154. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_mm": {
     "min": 4.111,
     "max": 4.111,
     "quality": "reported",
     "raw": "4.111",
     "column": "DATA!C154",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C154. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 50.6625,
     "quality": "reported",
     "raw": "0.5 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.383,
     "max": 4.383,
     "quality": "reported",
     "raw": "4.383",
     "column": "DATA!B154",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B154. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-08-01",
     "quality": "reported",
     "raw": "1-Aug-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/65",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f213d04",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 65,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.114,
     "max": 0.114,
     "quality": "reported",
     "raw": "0.114",
     "column": "DATA!E155",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E155. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.196,
     "max": 0.196,
     "quality": "reported",
     "raw": "0.196",
     "column": "DATA!D155",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D155. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 5.628,
     "max": 5.628,
     "quality": "reported",
     "raw": "5.628",
     "column": "DATA!F155",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F155. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 5.67,
     "max": 5.67,
     "quality": "reported",
     "raw": "5.67",
     "column": "DATA!C155",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C155. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 50.6625,
     "quality": "reported",
     "raw": "0.5 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 5.781,
     "max": 5.781,
     "quality": "reported",
     "raw": "5.781",
     "column": "DATA!B155",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B155. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-08-01",
     "quality": "reported",
     "raw": "1-Aug-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/66",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f221e06",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 66,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "test_date": {
     "text": "2017-08-09",
     "quality": "reported",
     "raw": "9-Aug-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/67",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f222d01",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 67,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.243,
     "max": 0.243,
     "quality": "reported",
     "raw": "0.243",
     "column": "DATA!E160",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E160. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.264,
     "max": 0.264,
     "quality": "reported",
     "raw": "0.264",
     "column": "DATA!D160",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D160. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 4.218,
     "max": 4.218,
     "quality": "reported",
     "raw": "4.218",
     "column": "DATA!F160",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F160. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.356,
     "max": 4.356,
     "quality": "reported",
     "raw": "4.356",
     "column": "DATA!C160",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C160. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.474,
     "max": 4.474,
     "quality": "reported",
     "raw": "4.474",
     "column": "DATA!B160",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B160. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-08-10",
     "quality": "reported",
     "raw": "10-Aug-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/68",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f222d02",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 68,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.059,
     "max": 0.059,
     "quality": "reported",
     "raw": "0.059",
     "column": "DATA!E161",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E161. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.137,
     "max": 0.137,
     "quality": "reported",
     "raw": "0.137",
     "column": "DATA!D161",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D161. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 5.585,
     "max": 5.585,
     "quality": "reported",
     "raw": "5.585",
     "column": "DATA!F161",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F161. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 5.623,
     "max": 5.623,
     "quality": "reported",
     "raw": "5.623",
     "column": "DATA!C161",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C161. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 5.641,
     "max": 5.641,
     "quality": "reported",
     "raw": "5.641",
     "column": "DATA!B161",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B161. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-08-10",
     "quality": "reported",
     "raw": "10-Aug-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/69",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f222d03",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 69,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.28,
     "max": 0.28,
     "quality": "reported",
     "raw": "0.28",
     "column": "DATA!E162",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E162. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.332,
     "max": 0.332,
     "quality": "reported",
     "raw": "0.332",
     "column": "DATA!D162",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D162. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 3.916,
     "max": 3.916,
     "quality": "reported",
     "raw": "3.916",
     "column": "DATA!F162",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F162. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 4.094,
     "max": 4.094,
     "quality": "reported",
     "raw": "4.094",
     "column": "DATA!C162",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C162. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 4.256,
     "max": 4.256,
     "quality": "reported",
     "raw": "4.256",
     "column": "DATA!B162",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B162. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-08-10",
     "quality": "reported",
     "raw": "10-Aug-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/70",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f222d04",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 70,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "burning_rate_cool_mm2_s": {
     "min": 0.034,
     "max": 0.034,
     "quality": "reported",
     "raw": "0.034",
     "column": "DATA!E163",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!E163. Cool-flame burning-rate constant, NASA's column \"kcool ( mm^2/s )\"."
    },
    "burning_rate_mm2_s": {
     "min": 0.105,
     "max": 0.105,
     "quality": "reported",
     "raw": "0.105",
     "column": "DATA!D163",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!D163. Hot-flame burning-rate constant, NASA's column \" khot ( mm^2/s )\"."
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "extinction_diameter_cool_mm": {
     "min": 6.219,
     "max": 6.219,
     "quality": "reported",
     "raw": "6.219",
     "column": "DATA!F163",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!F163. Droplet diameter when the cool flame went out, NASA's column \"Dext,cool ( mm )\"."
    },
    "extinction_diameter_mm": {
     "min": 6.234,
     "max": 6.234,
     "quality": "reported",
     "raw": "6.234",
     "column": "DATA!C163",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!C163. Droplet diameter when the hot flame went out, NASA's column \"Dext, hot ( mm )\"."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "size_mm": {
     "min": 6.21,
     "max": 6.21,
     "quality": "reported",
     "raw": "6.21",
     "column": "DATA!B163",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, DATA!B163. Starting droplet diameter, NASA's column \"D0 ( mm )\"."
    },
    "test_date": {
     "text": "2017-08-10",
     "quality": "reported",
     "raw": "10-Aug-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/71",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f226e01",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 71,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Pressure"
    },
    "test_date": {
     "text": "2017-08-14",
     "quality": "reported",
     "raw": "14-Aug-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/72",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f226e02",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 72,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B165",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B165. NASA's comment on this test says a cool flame burned.",
     "evidence": "Small bubble on surface. Good deployment of fiber, bubble still there. Good ignition, no droplet motion (~7 sec). Slight drift W on fiber, not much. Very brief hot flame burn (~5 sec). Brief oscillation before extinction. Unusual glow from fiber on one side. Vapor cloud formation at ~20 sec. Very long, very slow cool flame burn.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Pressure"
    },
    "test_date": {
     "text": "2017-08-14",
     "quality": "reported",
     "raw": "14-Aug-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/73",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f226e03",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 73,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Pressure"
    },
    "test_date": {
     "text": "2017-08-14",
     "quality": "reported",
     "raw": "14-Aug-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/74",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f228e01",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 74,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Pressure"
    },
    "test_date": {
     "text": "2017-08-16",
     "quality": "reported",
     "raw": "16-Aug-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/75",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f228e02",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 75,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "cool_flame": {
     "bool": true,
     "quality": "reported",
     "raw": "cool flame burn",
     "column": "Comments!B171",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B171. NASA's comment on this test says a cool flame burned.",
     "evidence": "Changed igniter cut-off to -6.5 sec based on last test. Good deployment - a little drift to upper igniter. Good ignition, igniters cut-off as expected in ~8 sec. ~3 sec hot flame burn. Very long cool flame burn. Vapor cloud starts to form ~15 sec. Droplet disappears at ~50 sec after hot-flame extinction.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 303.975,
     "max": 303.975,
     "quality": "reported",
     "raw": "3 atm",
     "column": "Pressure"
    },
    "test_date": {
     "text": "2017-08-16",
     "quality": "reported",
     "raw": "16-Aug-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/76",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f233d01",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 76,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Helium"
    },
    "ignited": {
     "bool": false,
     "quality": "reported",
     "raw": "No ignition",
     "column": "Comments!B180",
     "note": "From NASA's file PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx, Comments!B180. NASA's comment on this test.",
     "evidence": "Fuel looks clear, no bubbles. Good igniter position. Igniters get a bit brighter 5 sec after being on, but no hot-flame ignition. No ignition. Saving test point. Final size ~3 mm.",
     "evidence_source": "file:PSI-39_Science Documents_CFI_DataSummary_Spreadsheet_Jan2021.xlsx"
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "test_date": {
     "text": "2017-08-21",
     "quality": "reported",
     "raw": "21-Aug-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/77",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f233d02",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 77,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "test_date": {
     "text": "2017-08-21",
     "quality": "reported",
     "raw": "21-Aug-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/78",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f233d04",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 78,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "test_date": {
     "text": "2017-08-21",
     "quality": "reported",
     "raw": "21-Aug-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/79",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f233d05",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 79,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.60]/[.40] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "test_date": {
     "text": "2017-08-21",
     "quality": "reported",
     "raw": "21-Aug-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/80",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f173e01",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 80,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "test_date": {
     "text": "2017-06-22",
     "quality": "reported",
     "raw": "22-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/81",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f173e02",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 81,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "test_date": {
     "text": "2017-06-22",
     "quality": "reported",
     "raw": "22-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/82",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f173e03",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 82,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "test_date": {
     "text": "2017-06-22",
     "quality": "reported",
     "raw": "22-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/83",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f173e05",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 83,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "test_date": {
     "text": "2017-06-22",
     "quality": "reported",
     "raw": "22-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/84",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f173e06",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 84,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.83,
     "max": 0.83,
     "quality": "reported",
     "raw": "0.83",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "test_date": {
     "text": "2017-06-22",
     "quality": "reported",
     "raw": "22-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/85",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f179e01",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 85,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "test_date": {
     "text": "2017-06-28",
     "quality": "reported",
     "raw": "28-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/86",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f179e02",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 86,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "test_date": {
     "text": "2017-06-28",
     "quality": "reported",
     "raw": "28-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-39/cfi/87",
   "accession": "PSI-39",
   "investigation": "CFI",
   "type": "test",
   "label": "f179e05",
   "source_table": "PSI-39_Experimental table_CFI.csv",
   "source_row": 87,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-39",
   "values": {
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "fuel": {
     "text": "n-dodecane / iso-dodecane",
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "[.75]/[.25] C12H26/iso-dodecane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "controlled combustion of fuel droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Helium"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Nitrogen"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "delivers the desired gas mixture to the combustion chamber",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Oxygen"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "1 atm",
     "column": "Pressure"
    },
    "test_date": {
     "text": "2017-06-28",
     "quality": "reported",
     "raw": "28-Jun-17",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-47/daft3-bag/1",
   "accession": "PSI-47",
   "investigation": "DAFT",
   "type": "test",
   "label": "DAFT-3 Sample Bag #1 (GMT 233, 2006)",
   "source_table": "PSI-47_Evidence pack_PSI-47",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-47",
   "values": {
    "dust_fill_toggles": {
     "min": 4,
     "max": 4,
     "quality": "context",
     "raw": "four",
     "column": "section II.D.5 (DAFT-3, Session 1, GMT 233, 2006)",
     "note": "From NASA's file PSI-47_Reports_DAFT_FinalReport.doc, section II.D.5 (DAFT-3, Session 1, GMT 233, 2006). This is a setting, not a measurement. Toggles of the fill valve that released Arizona Road Dust into the 15-liter sample bag. NASA states the requested number; the paragraph comes before Bag #1 is extracted, and the report then states six for Bag #2 and eight for Bag #3, so it is read as Bag #1's.",
     "evidence": "The number of requested toggles of the fill valve (per the Execution Notes), once the DAFT Dust Holder was installed onto the Fill Assembly, was four.",
     "evidence_source": "file:PSI-47_Reports_DAFT_FinalReport.doc"
    },
    "fuel": {
     "text": "Arizona Road Dust (Fine)",
     "quality": "context",
     "raw": "Arizona Road Dust (Fine)",
     "column": "section III.B (Completeness/Quality of Data)",
     "note": "From NASA's file PSI-47_Reports_DAFT_FinalReport.doc, section III.B (Completeness/Quality of Data). The aerosol in the bags: Arizona Road Dust dispersed in ISS nitrogen. Not a flame or smoke test.",
     "evidence": "The sample material, Arizona Road Dust (Fine) is a standardized, homogenous material; but since it contains a wide distribution of sizes, it is a mixture.",
     "evidence_source": "file:PSI-47_Reports_DAFT_FinalReport.doc"
    },
    "mass_per_particle_g": {
     "min": 2.64757221832582e-12,
     "max": 2.64757221832582e-12,
     "quality": "reported",
     "raw": "2.64757221832582e-12",
     "column": "Logged Data Summary!B7",
     "note": "From NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls, Logged Data Summary!B7. Mean of the readings the instrument itself logged while this bag was sampled (row \"average**\"; the sheet notes \"** Data is from other sheet\"). The logs were read from the instruments' memory after they came back to Earth. NASA's row \"Mass Per Particle (gram)\": the bag's mean DustTrak mass concentration divided by its mean P-Trak count. The cell is a formula in NASA's sheet; the value is the result the sheet stores. Computed by NASA in its own sheet, not by us. NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls gives the same. NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_0611zgy time hist.xls gives the same. NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_06 urban.xls gives the same."
    },
    "particle_diameter_mass_um": {
     "min": 1.716391677817242,
     "max": 1.716391677817242,
     "quality": "reported",
     "raw": "1.716391677817242",
     "column": "Logged Data Summary!B9",
     "note": "From NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls, Logged Data Summary!B9. Mean of the readings the instrument itself logged while this bag was sampled (row \"average**\"; the sheet notes \"** Data is from other sheet\"). The logs were read from the instruments' memory after they came back to Earth. NASA's row \"D (micon)\" (\"Particle Diameter (micon)\" in the time-history copy): the diameter of a sphere with the mass per particle, at the density the sheet assumes, 1 g/cm3. A calculation with an assumed density, not a sizing measurement. The cell is a formula in NASA's sheet; the value is the result the sheet stores. Computed by NASA in its own sheet, not by us. NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls gives 1.68213 µm (Voice Down Data Summary!B25). NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_0611zgy time hist.xls gives 1.68213 µm (Data!C27). NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_06 urban.xls gives 1.68213 µm (Data!B25)."
    },
    "particle_mass_conc_mg_m3": {
     "min": 45.63425925925927,
     "max": 45.63425925925927,
     "quality": "reported",
     "raw": "45.63425925925927",
     "column": "Logged Data Summary!C5",
     "note": "From NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls, Logged Data Summary!C5. Mean of the readings the instrument itself logged while this bag was sampled (row \"average**\"; the sheet notes \"** Data is from other sheet\"). The logs were read from the instruments' memory after they came back to Earth. DustTrak column \"DustTrak mg/m3\". The cell is a formula in NASA's sheet; the value is the result the sheet stores. NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls gives 43.15 mg/m³ (Voice Down Data Summary!C21). NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_0611zgy time hist.xls gives 43.15 mg/m³ (Data!D23). NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_06 urban.xls gives 43.15 mg/m³ (Data!C21)."
    },
    "particle_number_conc_cm3": {
     "min": 17236.2660944206,
     "max": 17236.2660944206,
     "quality": "reported",
     "raw": "17236.2660944206",
     "column": "Logged Data Summary!B5",
     "note": "From NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls, Logged Data Summary!B5. Mean of the readings the instrument itself logged while this bag was sampled (row \"average**\"; the sheet notes \"** Data is from other sheet\"). The logs were read from the instruments' memory after they came back to Earth. P-Trak column \"P-Trak n/cm3\". The cell is a formula in NASA's sheet; the value is the result the sheet stores. NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls gives 17314.3 particles/cm³ (Voice Down Data Summary!B21). NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_0611zgy time hist.xls gives 17314.3 particles/cm³ (Data!C23). NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_06 urban.xls gives 17314.3 particles/cm³ (Data!B21)."
    },
    "test_date": {
     "text": "2006-08-21",
     "quality": "reported",
     "raw": "August 21, 2006",
     "column": "Data!A1",
     "note": "From NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_0611zgy time hist.xls, Data!A1. The sheet's title; all three bags were read that day. NASA's file PSI-47_Reports_DAFT_FinalReport.doc gives the same.",
     "evidence": "DAFTl ISS test result, August 21, 2006",
     "evidence_source": "file:PSI-47_Analyzed Data_ISS_Daft_Aug21_0611zgy time hist.xls"
    }
   }
  },
  {
   "id": "PSI-47/daft3-bag/2",
   "accession": "PSI-47",
   "investigation": "DAFT",
   "type": "test",
   "label": "DAFT-3 Sample Bag #2 (GMT 233, 2006)",
   "source_table": "PSI-47_Evidence pack_PSI-47",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-47",
   "values": {
    "dust_fill_toggles": {
     "min": 6,
     "max": 6,
     "quality": "context",
     "raw": "Six",
     "column": "section II.D.5 (DAFT-3, Session 1, GMT 233, 2006)",
     "note": "From NASA's file PSI-47_Reports_DAFT_FinalReport.doc, section II.D.5 (DAFT-3, Session 1, GMT 233, 2006). This is a setting, not a measurement. Toggles of the fill valve that released Arizona Road Dust into the 15-liter sample bag.",
     "evidence": "Six toggles were used to introduce dust into Sample Bag #2.",
     "evidence_source": "file:PSI-47_Reports_DAFT_FinalReport.doc"
    },
    "fuel": {
     "text": "Arizona Road Dust (Fine)",
     "quality": "context",
     "raw": "Arizona Road Dust (Fine)",
     "column": "section III.B (Completeness/Quality of Data)",
     "note": "From NASA's file PSI-47_Reports_DAFT_FinalReport.doc, section III.B (Completeness/Quality of Data). The aerosol in the bags: Arizona Road Dust dispersed in ISS nitrogen. Not a flame or smoke test.",
     "evidence": "The sample material, Arizona Road Dust (Fine) is a standardized, homogenous material; but since it contains a wide distribution of sizes, it is a mixture.",
     "evidence_source": "file:PSI-47_Reports_DAFT_FinalReport.doc"
    },
    "mass_per_particle_g": {
     "min": 2.039720731573759e-12,
     "max": 2.039720731573759e-12,
     "quality": "reported",
     "raw": "2.039720731573759e-12",
     "column": "Logged Data Summary!E7",
     "note": "From NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls, Logged Data Summary!E7. Mean of the readings the instrument itself logged while this bag was sampled (row \"average**\"; the sheet notes \"** Data is from other sheet\"). The logs were read from the instruments' memory after they came back to Earth. NASA's row \"Mass Per Particle (gram)\": the bag's mean DustTrak mass concentration divided by its mean P-Trak count. The cell is a formula in NASA's sheet; the value is the result the sheet stores. Computed by NASA in its own sheet, not by us. NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls gives the same. NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_0611zgy time hist.xls gives the same. NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_06 urban.xls gives the same."
    },
    "particle_diameter_mass_um": {
     "min": 1.5734660075575493,
     "max": 1.5734660075575493,
     "quality": "reported",
     "raw": "1.5734660075575493",
     "column": "Logged Data Summary!E9",
     "note": "From NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls, Logged Data Summary!E9. Mean of the readings the instrument itself logged while this bag was sampled (row \"average**\"; the sheet notes \"** Data is from other sheet\"). The logs were read from the instruments' memory after they came back to Earth. NASA's row \"D (micon)\" (\"Particle Diameter (micon)\" in the time-history copy): the diameter of a sphere with the mass per particle, at the density the sheet assumes, 1 g/cm3. A calculation with an assumed density, not a sizing measurement. The cell is a formula in NASA's sheet; the value is the result the sheet stores. Computed by NASA in its own sheet, not by us. NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls gives 1.55674 µm (Voice Down Data Summary!E25). NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_0611zgy time hist.xls gives 1.55674 µm (Data!G27). NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_06 urban.xls gives 1.55674 µm (Data!E25)."
    },
    "particle_mass_conc_mg_m3": {
     "min": 33.83766498740553,
     "max": 33.83766498740553,
     "quality": "reported",
     "raw": "33.83766498740553",
     "column": "Logged Data Summary!F5",
     "note": "From NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls, Logged Data Summary!F5. Mean of the readings the instrument itself logged while this bag was sampled (row \"average**\"; the sheet notes \"** Data is from other sheet\"). The logs were read from the instruments' memory after they came back to Earth. DustTrak column \"DustTrak mg/m3\". The cell is a formula in NASA's sheet; the value is the result the sheet stores. NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls gives 34.0875 mg/m³ (Voice Down Data Summary!F21). NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_0611zgy time hist.xls gives 34.0875 mg/m³ (Data!H23). NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_06 urban.xls gives 34.0875 mg/m³ (Data!F21)."
    },
    "particle_number_conc_cm3": {
     "min": 16589.36170212766,
     "max": 16589.36170212766,
     "quality": "reported",
     "raw": "16589.36170212766",
     "column": "Logged Data Summary!E5",
     "note": "From NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls, Logged Data Summary!E5. Mean of the readings the instrument itself logged while this bag was sampled (row \"average**\"; the sheet notes \"** Data is from other sheet\"). The logs were read from the instruments' memory after they came back to Earth. P-Trak column \"P-Trak n/cm3\". The cell is a formula in NASA's sheet; the value is the result the sheet stores. NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls gives 17256.2 particles/cm³ (Voice Down Data Summary!E21). NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_0611zgy time hist.xls gives 17256.2 particles/cm³ (Data!G23). NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_06 urban.xls gives 17256.2 particles/cm³ (Data!E21)."
    },
    "test_date": {
     "text": "2006-08-21",
     "quality": "reported",
     "raw": "August 21, 2006",
     "column": "Data!A1",
     "note": "From NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_0611zgy time hist.xls, Data!A1. The sheet's title; all three bags were read that day. NASA's file PSI-47_Reports_DAFT_FinalReport.doc gives the same.",
     "evidence": "DAFTl ISS test result, August 21, 2006",
     "evidence_source": "file:PSI-47_Analyzed Data_ISS_Daft_Aug21_0611zgy time hist.xls"
    }
   }
  },
  {
   "id": "PSI-47/daft3-bag/3",
   "accession": "PSI-47",
   "investigation": "DAFT",
   "type": "test",
   "label": "DAFT-3 Sample Bag #3 (GMT 233, 2006)",
   "source_table": "PSI-47_Evidence pack_PSI-47",
   "source_row": 3,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-47",
   "values": {
    "dust_fill_toggles": {
     "min": 8,
     "max": 8,
     "quality": "context",
     "raw": "Eight",
     "column": "section II.D.5 (DAFT-3, Session 1, GMT 233, 2006)",
     "note": "From NASA's file PSI-47_Reports_DAFT_FinalReport.doc, section II.D.5 (DAFT-3, Session 1, GMT 233, 2006). This is a setting, not a measurement. Toggles of the fill valve that released Arizona Road Dust into the 15-liter sample bag.",
     "evidence": "Eight toggles were used for Sample Bag #3.",
     "evidence_source": "file:PSI-47_Reports_DAFT_FinalReport.doc"
    },
    "fuel": {
     "text": "Arizona Road Dust (Fine)",
     "quality": "context",
     "raw": "Arizona Road Dust (Fine)",
     "column": "section III.B (Completeness/Quality of Data)",
     "note": "From NASA's file PSI-47_Reports_DAFT_FinalReport.doc, section III.B (Completeness/Quality of Data). The aerosol in the bags: Arizona Road Dust dispersed in ISS nitrogen. Not a flame or smoke test.",
     "evidence": "The sample material, Arizona Road Dust (Fine) is a standardized, homogenous material; but since it contains a wide distribution of sizes, it is a mixture.",
     "evidence_source": "file:PSI-47_Reports_DAFT_FinalReport.doc"
    },
    "mass_per_particle_g": {
     "min": 2.3572468431275776e-12,
     "max": 2.3572468431275776e-12,
     "quality": "reported",
     "raw": "2.3572468431275776e-12",
     "column": "Logged Data Summary!H7",
     "note": "From NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls, Logged Data Summary!H7. Mean of the readings the instrument itself logged while this bag was sampled (row \"average**\"; the sheet notes \"** Data is from other sheet\"). The logs were read from the instruments' memory after they came back to Earth. NASA's row \"Mass Per Particle (gram)\": the bag's mean DustTrak mass concentration divided by its mean P-Trak count. The cell is a formula in NASA's sheet; the value is the result the sheet stores. Computed by NASA in its own sheet, not by us. NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls gives the same. NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_0611zgy time hist.xls gives the same. NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_06 urban.xls gives the same."
    },
    "particle_diameter_mass_um": {
     "min": 1.65120938856601,
     "max": 1.65120938856601,
     "quality": "reported",
     "raw": "1.65120938856601",
     "column": "Logged Data Summary!H9",
     "note": "From NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls, Logged Data Summary!H9. Mean of the readings the instrument itself logged while this bag was sampled (row \"average**\"; the sheet notes \"** Data is from other sheet\"). The logs were read from the instruments' memory after they came back to Earth. NASA's row \"D (micon)\" (\"Particle Diameter (micon)\" in the time-history copy): the diameter of a sphere with the mass per particle, at the density the sheet assumes, 1 g/cm3. A calculation with an assumed density, not a sizing measurement. The cell is a formula in NASA's sheet; the value is the result the sheet stores. Computed by NASA in its own sheet, not by us. NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls gives 1.70491 µm (Voice Down Data Summary!H25). NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_0611zgy time hist.xls gives 1.70491 µm (Data!K27). NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_06 urban.xls gives 1.70186 µm (Data!H25)."
    },
    "particle_mass_conc_mg_m3": {
     "min": 62.650869080779884,
     "max": 62.650869080779884,
     "quality": "reported",
     "raw": "62.650869080779884",
     "column": "Logged Data Summary!I5",
     "note": "From NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls, Logged Data Summary!I5. Mean of the readings the instrument itself logged while this bag was sampled (row \"average**\"; the sheet notes \"** Data is from other sheet\"). The logs were read from the instruments' memory after they came back to Earth. DustTrak column \"DustTrak mg/m3\". The cell is a formula in NASA's sheet; the value is the result the sheet stores. NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls gives 63.1833 mg/m³ (Voice Down Data Summary!I21). NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_0611zgy time hist.xls gives 63.1833 mg/m³ (Data!L23). NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_06 urban.xls gives 63.2889 mg/m³ (Data!I21)."
    },
    "particle_number_conc_cm3": {
     "min": 26577.984084880638,
     "max": 26577.984084880638,
     "quality": "reported",
     "raw": "26577.984084880638",
     "column": "Logged Data Summary!H5",
     "note": "From NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls, Logged Data Summary!H5. Mean of the readings the instrument itself logged while this bag was sampled (row \"average**\"; the sheet notes \"** Data is from other sheet\"). The logs were read from the instruments' memory after they came back to Earth. P-Trak column \"P-Trak n/cm3\". The cell is a formula in NASA's sheet; the value is the result the sheet stores. NASA's file PSI-47_Analyzed Data_DAFT Retrieved Data Summary.xls gives 24350 particles/cm³ (Voice Down Data Summary!H21). NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_0611zgy time hist.xls gives 24350 particles/cm³ (Data!K23). NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_06 urban.xls gives 24522.2 particles/cm³ (Data!H21)."
    },
    "test_date": {
     "text": "2006-08-21",
     "quality": "reported",
     "raw": "August 21, 2006",
     "column": "Data!A1",
     "note": "From NASA's file PSI-47_Analyzed Data_ISS_Daft_Aug21_0611zgy time hist.xls, Data!A1. The sheet's title; all three bags were read that day. NASA's file PSI-47_Reports_DAFT_FinalReport.doc gives the same.",
     "evidence": "DAFTl ISS test result, August 21, 2006",
     "evidence_source": "file:PSI-47_Analyzed Data_ISS_Daft_Aug21_0611zgy time hist.xls"
    }
   }
  },
  {
   "id": "PSI-47/daft3-cabin/1",
   "accession": "PSI-47",
   "investigation": "DAFT",
   "type": "test",
   "label": "DAFT-3 Session D3, cabin air (GMT 229, 2006)",
   "source_table": "PSI-47_Evidence pack_PSI-47",
   "source_row": 4,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-47",
   "values": {
    "description": {
     "text": "At that point, the nominal test plan was aborted. Jeff was asked to restow the Fill Assembly, and to revert to the procedure that was used for DAFT-1 &-2, taking a cabin air sample, which he did.",
     "quality": "context",
     "raw": "At that point, the nominal test plan was aborted. Jeff was asked to restow the Fill Assembly, and to revert to the procedure that was used for DAFT-1 &-2, taking a cabin air sample, which he did.",
     "column": "section II.D.3 (DAFT-3, GMT 229, 2006)",
     "note": "From NASA's file PSI-47_Reports_DAFT_FinalReport.doc, section II.D.3 (DAFT-3, GMT 229, 2006). The Sessions table gives this session as D3, GMT 229, 2006: \"Test aborted due to damage to DAFT-0401\".",
     "evidence": "At that point, the nominal test plan was aborted. Jeff was asked to restow the Fill Assembly, and to revert to the procedure that was used for DAFT-1 &-2, taking a cabin air sample, which he did.",
     "evidence_source": "file:PSI-47_Reports_DAFT_FinalReport.doc"
    },
    "fuel": {
     "text": "ISS cabin air",
     "quality": "context",
     "raw": "cabin air",
     "column": "section II.D.3 (DAFT-3, GMT 229, 2006)",
     "note": "From NASA's file PSI-47_Reports_DAFT_FinalReport.doc, section II.D.3 (DAFT-3, GMT 229, 2006). Only cabin air was sampled in this session.",
     "evidence": "At that point, the nominal test plan was aborted. Jeff was asked to restow the Fill Assembly, and to revert to the procedure that was used for DAFT-1 &-2, taking a cabin air sample, which he did.",
     "evidence_source": "file:PSI-47_Reports_DAFT_FinalReport.doc"
    }
   }
  },
  {
   "id": "PSI-47/daft/1",
   "accession": "PSI-47",
   "investigation": "DAFT",
   "type": "session",
   "label": "Session D1",
   "source_table": "PSI-47_Experimental table_DAFT.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-47",
   "values": {
    "description": {
     "text": "Contained the modified P-Trak with Alcohol Wick and batteries",
     "quality": "reported",
     "raw": "Contained the modified P-Trak with Alcohol Wick and batteries",
     "column": "Hardware Description"
    },
    "fuel": {
     "text": "ISS cabin air",
     "quality": "context",
     "raw": "ISS cabin air",
     "column": "section II.B (List & Description of All Functional Objectives)",
     "note": "From NASA's file PSI-47_Reports_DAFT_FinalReport.doc, section II.B (List & Description of All Functional Objectives). DAFT-1 and -2 had no dust on board, so these sessions sampled cabin air. PSI's table names Arizona Road Dust as the sample material for both rows; the report says otherwise. In Session D2 test point #2 sampled debris from Velcro pulled apart at the inlet.",
     "evidence": "Since the sample materials were not included, the team decided to operate the devices while sampling ISS cabin air at various locations.",
     "evidence_source": "file:PSI-47_Reports_DAFT_FinalReport.doc"
    },
    "geometry": {
     "text": "dust aerosol (no flame)",
     "quality": "context",
     "evidence": "Arizona Red Dust (ARD) was chosen as an aerosol standard",
     "evidence_source": "psi"
    },
    "notes": {
     "text": "Sampled air near Express rack 4",
     "quality": "reported",
     "raw": "Sampled air near Express rack 4",
     "column": "Sampled Location"
    },
    "particle_number_conc_cm3": {
     "min": 1.4318936877076411,
     "max": 1.4318936877076411,
     "quality": "reported",
     "raw": "1.4318936877076411",
     "column": "PTrk0001!H35",
     "note": "From NASA's file PSI-47_Analyzed Data_DAFT Flight Data GMT053.xls, PTrk0001!H35. NASA's cell under the label \"average 300 to 600 ptrack\" (H34): the mean P-Trak reading from 300 to 600 s of test point #1's log, units particles/cc (B7). The cell is a formula in NASA's sheet; the value is the result the sheet stores. NASA's file PSI-47_Reports_DAFT_FinalReport.doc gives 2 to 5 particles/cm³ (section II.D.1 (DAFT-1 & DAFT -2, Session 1, GMT 54, 2005))."
    },
    "test_date": {
     "text": "2005-02-22",
     "quality": "reported",
     "raw": "22Feb05",
     "column": "PTrk0001!B4",
     "note": "From NASA's file PSI-47_Analyzed Data_DAFT Flight Data GMT053.xls, PTrk0001!B4. The P-Trak log's header for TestID 1. NASA's file PSI-47_Reports_DAFT_FinalReport.doc gives the same.",
     "evidence": "GMT: 22Feb05 13:58:03",
     "evidence_source": "file:PSI-47_Analyzed Data_DAFT Flight Data GMT053.xls"
    }
   }
  },
  {
   "id": "PSI-47/daft/2",
   "accession": "PSI-47",
   "investigation": "DAFT",
   "type": "session",
   "label": "Session D2",
   "source_table": "PSI-47_Experimental table_DAFT.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-47",
   "values": {
    "description": {
     "text": "Contained DustTrak and batteries",
     "quality": "reported",
     "raw": "Contained DustTrak and batteries",
     "column": "Hardware Description"
    },
    "fuel": {
     "text": "ISS cabin air",
     "quality": "context",
     "raw": "ISS cabin air",
     "column": "section II.B (List & Description of All Functional Objectives)",
     "note": "From NASA's file PSI-47_Reports_DAFT_FinalReport.doc, section II.B (List & Description of All Functional Objectives). DAFT-1 and -2 had no dust on board, so these sessions sampled cabin air. PSI's table names Arizona Road Dust as the sample material for both rows; the report says otherwise. In Session D2 test point #2 sampled debris from Velcro pulled apart at the inlet.",
     "evidence": "Since the sample materials were not included, the team decided to operate the devices while sampling ISS cabin air at various locations.",
     "evidence_source": "file:PSI-47_Reports_DAFT_FinalReport.doc"
    },
    "geometry": {
     "text": "dust aerosol (no flame)",
     "quality": "context",
     "evidence": "Arizona Red Dust (ARD) was chosen as an aerosol standard",
     "evidence_source": "psi"
    },
    "notes": {
     "text": "Sampled separated Velcro and the air near Port rack 6 and in Node 1",
     "quality": "reported",
     "raw": "Sampled separated Velcro and the air near Port rack 6 and in Node 1",
     "column": "Sampled Location"
    },
    "test_date": {
     "text": "2005-03-04",
     "quality": "reported",
     "raw": "04Mar05",
     "column": "PTrk0002!A4",
     "note": "From NASA's file PSI-47_Analyzed Data_flight data 063.xls, PTrk0002!A4. The P-Trak log's header for TestID 2, the first of the session's three test points. NASA's file PSI-47_Reports_DAFT_FinalReport.doc gives the same.",
     "evidence": "GMT: 04Mar05 18:34:31",
     "evidence_source": "file:PSI-47_Analyzed Data_flight data 063.xls"
    }
   }
  },
  {
   "id": "PSI-68/flex2/1",
   "accession": "PSI-68",
   "investigation": "FLEX-2",
   "type": "envelope",
   "label": "IsoOctane (pure)",
   "source_table": "PSI-68_Experimental table_Flex2.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-68",
   "values": {
    "ambient_temperature_c": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Ambient Temperature (C)"
    },
    "diluent": {
     "text": "N2 or He",
     "quality": "reported",
     "raw": "O2/N2 or O2/He",
     "column": "Ambient Gas Mixture"
    },
    "flow_speed_cm_s": {
     "min": 0.1,
     "max": 5,
     "quality": "reported",
     "raw": "0.1 - 5",
     "column": "Flow Velocity (cm/s)"
    },
    "fuel": {
     "text": "iso-octane",
     "quality": "reported",
     "raw": "IsoOctane (pure)",
     "column": "Sample (Fuel Type)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "IsoOctane (pure)",
     "column": "Sample (Fuel Type)"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "bi-component droplet combustion",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "bi-component droplet combustion",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "The chamber was filled with the appropriate atmosphere",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.3,
     "levels": [
      0.17,
      0.21,
      0.25,
      0.3
     ],
     "quality": "reported",
     "raw": "0.17; 0.21;0.25; 0.3",
     "column": "Oxygen Mole Fraction"
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 303.975,
     "levels": [
      50.6625,
      101.325,
      151.988,
      202.65,
      303.975
     ],
     "quality": "reported",
     "raw": "0.5; 1.0; 1.5; 2.0; or 3.0",
     "column": "Ambient Pressure (atm)"
    },
    "size_mm": {
     "min": 1.5,
     "max": 5,
     "quality": "reported",
     "raw": "1.5 - 5",
     "column": "Initial Droplet Diameter (mm)"
    }
   }
  },
  {
   "id": "PSI-68/flex2/2",
   "accession": "PSI-68",
   "investigation": "FLEX-2",
   "type": "envelope",
   "label": "n-Octane (pure)",
   "source_table": "PSI-68_Experimental table_Flex2.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-68",
   "values": {
    "ambient_temperature_c": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Ambient Temperature (C)"
    },
    "diluent": {
     "text": "N2 or He",
     "quality": "reported",
     "raw": "O2/N2 or O2/He",
     "column": "Ambient Gas Mixture"
    },
    "flow_speed_cm_s": {
     "min": 0.1,
     "max": 5,
     "quality": "reported",
     "raw": "0.1 - 5",
     "column": "Flow Velocity (cm/s)"
    },
    "fuel": {
     "text": "n-octane",
     "quality": "reported",
     "raw": "n-Octane (pure)",
     "column": "Sample (Fuel Type)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "n-Octane (pure)",
     "column": "Sample (Fuel Type)"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "bi-component droplet combustion",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "bi-component droplet combustion",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "The chamber was filled with the appropriate atmosphere",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.3,
     "levels": [
      0.17,
      0.21,
      0.25,
      0.3
     ],
     "quality": "reported",
     "raw": "0.17; 0.21;0.25; 0.3",
     "column": "Oxygen Mole Fraction"
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 303.975,
     "levels": [
      50.6625,
      101.325,
      151.988,
      202.65,
      303.975
     ],
     "quality": "reported",
     "raw": "0.5; 1.0; 1.5; 2.0; or 3.0",
     "column": "Ambient Pressure (atm)"
    },
    "size_mm": {
     "min": 1.5,
     "max": 5,
     "quality": "reported",
     "raw": "1.5 - 5",
     "column": "Initial Droplet Diameter (mm)"
    }
   }
  },
  {
   "id": "PSI-68/flex2/3",
   "accession": "PSI-68",
   "investigation": "FLEX-2",
   "type": "envelope",
   "label": "Heptane (pure)",
   "source_table": "PSI-68_Experimental table_Flex2.csv",
   "source_row": 3,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-68",
   "values": {
    "ambient_temperature_c": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Ambient Temperature (C)"
    },
    "diluent": {
     "text": "N2 or He",
     "quality": "reported",
     "raw": "O2/N2 or O2/He",
     "column": "Ambient Gas Mixture"
    },
    "flow_speed_cm_s": {
     "min": 0.1,
     "max": 5,
     "quality": "reported",
     "raw": "0.1 - 5",
     "column": "Flow Velocity (cm/s)"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane (pure)",
     "column": "Sample (Fuel Type)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "Heptane (pure)",
     "column": "Sample (Fuel Type)"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "bi-component droplet combustion",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "bi-component droplet combustion",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "The chamber was filled with the appropriate atmosphere",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.3,
     "levels": [
      0.17,
      0.21,
      0.25,
      0.3
     ],
     "quality": "reported",
     "raw": "0.17; 0.21;0.25; 0.3",
     "column": "Oxygen Mole Fraction"
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 303.975,
     "levels": [
      50.6625,
      101.325,
      151.988,
      202.65,
      303.975
     ],
     "quality": "reported",
     "raw": "0.5; 1.0; 1.5; 2.0; or 3.0",
     "column": "Ambient Pressure (atm)"
    },
    "size_mm": {
     "min": 1.5,
     "max": 5,
     "quality": "reported",
     "raw": "1.5 - 5",
     "column": "Initial Droplet Diameter (mm)"
    }
   }
  },
  {
   "id": "PSI-68/flex2/4",
   "accession": "PSI-68",
   "investigation": "FLEX-2",
   "type": "envelope",
   "label": "Decane (pure)",
   "source_table": "PSI-68_Experimental table_Flex2.csv",
   "source_row": 4,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-68",
   "values": {
    "ambient_temperature_c": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Ambient Temperature (C)"
    },
    "diluent": {
     "text": "N2 or He",
     "quality": "reported",
     "raw": "O2/N2 or O2/He",
     "column": "Ambient Gas Mixture"
    },
    "flow_speed_cm_s": {
     "min": 0.1,
     "max": 5,
     "quality": "reported",
     "raw": "0.1 - 5",
     "column": "Flow Velocity (cm/s)"
    },
    "fuel": {
     "text": "n-decane",
     "quality": "reported",
     "raw": "Decane (pure)",
     "column": "Sample (Fuel Type)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "Decane (pure)",
     "column": "Sample (Fuel Type)"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "bi-component droplet combustion",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "bi-component droplet combustion",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "The chamber was filled with the appropriate atmosphere",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.3,
     "levels": [
      0.17,
      0.21,
      0.25,
      0.3
     ],
     "quality": "reported",
     "raw": "0.17; 0.21;0.25; 0.3",
     "column": "Oxygen Mole Fraction"
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 303.975,
     "levels": [
      50.6625,
      101.325,
      151.988,
      202.65,
      303.975
     ],
     "quality": "reported",
     "raw": "0.5; 1.0; 1.5; 2.0; or 3.0",
     "column": "Ambient Pressure (atm)"
    },
    "size_mm": {
     "min": 1.5,
     "max": 5,
     "quality": "reported",
     "raw": "1.5 - 5",
     "column": "Initial Droplet Diameter (mm)"
    }
   }
  },
  {
   "id": "PSI-68/flex2/5",
   "accession": "PSI-68",
   "investigation": "FLEX-2",
   "type": "envelope",
   "label": "Ethanol (pure)",
   "source_table": "PSI-68_Experimental table_Flex2.csv",
   "source_row": 5,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-68",
   "values": {
    "ambient_temperature_c": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Ambient Temperature (C)"
    },
    "diluent": {
     "text": "N2 or He",
     "quality": "reported",
     "raw": "O2/N2 or O2/He",
     "column": "Ambient Gas Mixture"
    },
    "flow_speed_cm_s": {
     "min": 0.1,
     "max": 5,
     "quality": "reported",
     "raw": "0.1 - 5",
     "column": "Flow Velocity (cm/s)"
    },
    "fuel": {
     "text": "ethanol",
     "quality": "reported",
     "raw": "Ethanol (pure)",
     "column": "Sample (Fuel Type)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "Ethanol (pure)",
     "column": "Sample (Fuel Type)"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "bi-component droplet combustion",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "bi-component droplet combustion",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "The chamber was filled with the appropriate atmosphere",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.3,
     "levels": [
      0.17,
      0.21,
      0.25,
      0.3
     ],
     "quality": "reported",
     "raw": "0.17; 0.21;0.25; 0.3",
     "column": "Oxygen Mole Fraction"
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 303.975,
     "levels": [
      50.6625,
      101.325,
      151.988,
      202.65,
      303.975
     ],
     "quality": "reported",
     "raw": "0.5; 1.0; 1.5; 2.0; or 3.0",
     "column": "Ambient Pressure (atm)"
    },
    "size_mm": {
     "min": 1.5,
     "max": 5,
     "quality": "reported",
     "raw": "1.5 - 5",
     "column": "Initial Droplet Diameter (mm)"
    }
   }
  },
  {
   "id": "PSI-68/flex2/6",
   "accession": "PSI-68",
   "investigation": "FLEX-2",
   "type": "envelope",
   "label": "Propanol (95%) Glycerol (5%) (mixture)",
   "source_table": "PSI-68_Experimental table_Flex2.csv",
   "source_row": 6,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-68",
   "values": {
    "ambient_temperature_c": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Ambient Temperature (C)"
    },
    "diluent": {
     "text": "N2 or He",
     "quality": "reported",
     "raw": "O2/N2 or O2/He",
     "column": "Ambient Gas Mixture"
    },
    "flow_speed_cm_s": {
     "min": 0.1,
     "max": 5,
     "quality": "reported",
     "raw": "0.1 - 5",
     "column": "Flow Velocity (cm/s)"
    },
    "fuel": {
     "text": "propanol / glycerol",
     "quality": "reported",
     "raw": "Propanol (95%) Glycerol (5%) (mixture)",
     "column": "Sample (Fuel Type)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "Propanol (95%) Glycerol (5%) (mixture)",
     "column": "Sample (Fuel Type)"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "bi-component droplet combustion",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "bi-component droplet combustion",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "The chamber was filled with the appropriate atmosphere",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.3,
     "levels": [
      0.17,
      0.21,
      0.25,
      0.3
     ],
     "quality": "reported",
     "raw": "0.17; 0.21;0.25; 0.3",
     "column": "Oxygen Mole Fraction"
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 303.975,
     "levels": [
      50.6625,
      101.325,
      151.988,
      202.65,
      303.975
     ],
     "quality": "reported",
     "raw": "0.5; 1.0; 1.5; 2.0; or 3.0",
     "column": "Ambient Pressure (atm)"
    },
    "size_mm": {
     "min": 1.5,
     "max": 5,
     "quality": "reported",
     "raw": "1.5 - 5",
     "column": "Initial Droplet Diameter (mm)"
    }
   }
  },
  {
   "id": "PSI-68/flex2/7",
   "accession": "PSI-68",
   "investigation": "FLEX-2",
   "type": "envelope",
   "label": "Heptane (50%) IsoOctane (50%) (mixture)",
   "source_table": "PSI-68_Experimental table_Flex2.csv",
   "source_row": 7,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-68",
   "values": {
    "ambient_temperature_c": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Ambient Temperature (C)"
    },
    "diluent": {
     "text": "N2 or He",
     "quality": "reported",
     "raw": "O2/N2 or O2/He",
     "column": "Ambient Gas Mixture"
    },
    "flow_speed_cm_s": {
     "min": 0.1,
     "max": 5,
     "quality": "reported",
     "raw": "0.1 - 5",
     "column": "Flow Velocity (cm/s)"
    },
    "fuel": {
     "text": "n-heptane / iso-octane",
     "quality": "reported",
     "raw": "Heptane (50%) IsoOctane (50%) (mixture)",
     "column": "Sample (Fuel Type)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "Heptane (50%) IsoOctane (50%) (mixture)",
     "column": "Sample (Fuel Type)"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "bi-component droplet combustion",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "bi-component droplet combustion",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "The chamber was filled with the appropriate atmosphere",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.3,
     "levels": [
      0.17,
      0.21,
      0.25,
      0.3
     ],
     "quality": "reported",
     "raw": "0.17; 0.21;0.25; 0.3",
     "column": "Oxygen Mole Fraction"
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 303.975,
     "levels": [
      50.6625,
      101.325,
      151.988,
      202.65,
      303.975
     ],
     "quality": "reported",
     "raw": "0.5; 1.0; 1.5; 2.0; or 3.0",
     "column": "Ambient Pressure (atm)"
    },
    "size_mm": {
     "min": 1.5,
     "max": 5,
     "quality": "reported",
     "raw": "1.5 - 5",
     "column": "Initial Droplet Diameter (mm)"
    }
   }
  },
  {
   "id": "PSI-68/flex2/8",
   "accession": "PSI-68",
   "investigation": "FLEX-2",
   "type": "envelope",
   "label": "Propanol (80%) Glycerol (20%) (mixture)",
   "source_table": "PSI-68_Experimental table_Flex2.csv",
   "source_row": 8,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-68",
   "values": {
    "ambient_temperature_c": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "25",
     "column": "Ambient Temperature (C)"
    },
    "diluent": {
     "text": "N2 or He",
     "quality": "reported",
     "raw": "O2/N2 or O2/He",
     "column": "Ambient Gas Mixture"
    },
    "flow_speed_cm_s": {
     "min": 0.1,
     "max": 5,
     "quality": "reported",
     "raw": "0.1 - 5",
     "column": "Flow Velocity (cm/s)"
    },
    "fuel": {
     "text": "propanol / glycerol",
     "quality": "reported",
     "raw": "Propanol (80%) Glycerol (20%) (mixture)",
     "column": "Sample (Fuel Type)"
    },
    "fuel_fraction": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "Propanol (80%) Glycerol (20%) (mixture)",
     "column": "Sample (Fuel Type)"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "bi-component droplet combustion",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "bi-component droplet combustion",
     "evidence_source": "psi"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "The chamber was filled with the appropriate atmosphere",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.3,
     "levels": [
      0.17,
      0.21,
      0.25,
      0.3
     ],
     "quality": "reported",
     "raw": "0.17; 0.21;0.25; 0.3",
     "column": "Oxygen Mole Fraction"
    },
    "pressure_kpa": {
     "min": 50.6625,
     "max": 303.975,
     "levels": [
      50.6625,
      101.325,
      151.988,
      202.65,
      303.975
     ],
     "quality": "reported",
     "raw": "0.5; 1.0; 1.5; 2.0; or 3.0",
     "column": "Ambient Pressure (atm)"
    },
    "size_mm": {
     "min": 1.5,
     "max": 5,
     "quality": "reported",
     "raw": "1.5 - 5",
     "column": "Initial Droplet Diameter (mm)"
    }
   }
  },
  {
   "id": "PSI-69/flex-new/216",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N03H201 (FLEX-216)",
   "source_table": "PSI-69_Evidence pack_PSI-69",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "burn_time_s": {
     "min": 6.7,
     "max": 6.7,
     "quality": "reported",
     "raw": "6.7",
     "column": "p. 32, Table IX, row FLEX-216",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-216. Table IX column \"Burn time, s\".",
     "evidence": "FLEX–216 N03H201 9/1/11 21:02:30 Heptane 766.2 .15 .85 0 0 1.77 .33 .47 6.7 Completion",
     "evidence_source": "file:NTRS-20150023456.pdf"
    },
    "burning_rate_mm2_s": {
     "min": 0.47,
     "max": 0.47,
     "quality": "reported",
     "raw": ".47",
     "column": "p. 32, Table IX, row FLEX-216",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-216. Table IX column \"Burning rate, mm2/s\": the average burning-rate constant from a linear fit of droplet diameter squared against time (p. 25).",
     "evidence": "FLEX–216 N03H201 9/1/11 21:02:30 Heptane 766.2 .15 .85 0 0 1.77 .33 .47 6.7 Completion",
     "evidence_source": "file:NTRS-20150023456.pdf"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "p. 32, Table IX, row FLEX-216",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-216. Table IX column \"Initial ambient composition, mole fraction, CO2\".",
     "evidence": "FLEX–216 N03H201 9/1/11 21:02:30 Heptane 766.2 .15 .85 0 0 1.77 .33 .47 6.7 Completion",
     "evidence_source": "file:NTRS-20150023456.pdf"
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "p. 32, Table IX, row FLEX-216",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-216. Table IX column \"Test end\".",
     "evidence": "FLEX–216 N03H201 9/1/11 21:02:30 Heptane 766.2 .15 .85 0 0 1.77 .33 .47 6.7 Completion",
     "evidence_source": "file:NTRS-20150023456.pdf"
    },
    "extinction_diameter_mm": {
     "min": 0.33,
     "max": 0.33,
     "quality": "reported",
     "raw": ".33",
     "column": "p. 32, Table IX, row FLEX-216",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-216. Table IX column \"Visible flame extinction diameter, mm\": the droplet diameter when the visible flame went out (p. 25).",
     "evidence": "FLEX–216 N03H201 9/1/11 21:02:30 Heptane 766.2 .15 .85 0 0 1.77 .33 .47 6.7 Completion",
     "evidence_source": "file:NTRS-20150023456.pdf"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "p. 32, Table IX, row FLEX-216",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-216. Table IX column \"Fuel\".",
     "evidence": "FLEX–216 N03H201 9/1/11 21:02:30 Heptane 766.2 .15 .85 0 0 1.77 .33 .47 6.7 Completion",
     "evidence_source": "file:NTRS-20150023456.pdf"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "p. 32, Table IX, row FLEX-216",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-216. Table IX column \"Initial ambient composition, mole fraction, HE\".",
     "evidence": "FLEX–216 N03H201 9/1/11 21:02:30 Heptane 766.2 .15 .85 0 0 1.77 .33 .47 6.7 Completion",
     "evidence_source": "file:NTRS-20150023456.pdf"
    },
    "n2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": ".85",
     "column": "p. 32, Table IX, row FLEX-216",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-216. Table IX column \"Initial ambient composition, mole fraction, N2\".",
     "evidence": "FLEX–216 N03H201 9/1/11 21:02:30 Heptane 766.2 .15 .85 0 0 1.77 .33 .47 6.7 Completion",
     "evidence_source": "file:NTRS-20150023456.pdf"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": ".15",
     "column": "p. 32, Table IX, row FLEX-216",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-216. Table IX column \"Initial ambient composition, mole fraction, O2\".",
     "evidence": "FLEX–216 N03H201 9/1/11 21:02:30 Heptane 766.2 .15 .85 0 0 1.77 .33 .47 6.7 Completion",
     "evidence_source": "file:NTRS-20150023456.pdf"
    },
    "pressure_kpa": {
     "min": 102.152,
     "max": 102.152,
     "quality": "reported",
     "raw": "766.2",
     "column": "p. 32, Table IX, row FLEX-216",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-216. Table IX column \"Ambient pressure, mmHg\", multiplied by 101.325/760 to give kPa.",
     "evidence": "FLEX–216 N03H201 9/1/11 21:02:30 Heptane 766.2 .15 .85 0 0 1.77 .33 .47 6.7 Completion",
     "evidence_source": "file:NTRS-20150023456.pdf"
    },
    "size_mm": {
     "min": 1.77,
     "max": 1.77,
     "quality": "reported",
     "raw": "1.77",
     "column": "p. 32, Table IX, row FLEX-216",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-216. Table IX column \"Droplet initial diameter, mm\".",
     "evidence": "FLEX–216 N03H201 9/1/11 21:02:30 Heptane 766.2 .15 .85 0 0 1.77 .33 .47 6.7 Completion",
     "evidence_source": "file:NTRS-20150023456.pdf"
    },
    "test_date": {
     "text": "2011-09-01",
     "quality": "reported",
     "raw": "9/1/11",
     "column": "p. 32, Table IX, row FLEX-216",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-216. Table IX column \"Test Date\"; month/day/year.",
     "evidence": "FLEX–216 N03H201 9/1/11 21:02:30 Heptane 766.2 .15 .85 0 0 1.77 .33 .47 6.7 Completion",
     "evidence_source": "file:NTRS-20150023456.pdf"
    }
   }
  },
  {
   "id": "PSI-69/flex-new/230",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H01H103 (FLEX-230)",
   "source_table": "PSI-69_Evidence pack_PSI-69",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "burn_time_s": {
     "min": 9.8,
     "max": 9.8,
     "quality": "reported",
     "raw": "9.8",
     "column": "p. 32, Table IX, row FLEX-230",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-230. Table IX column \"Burn time, s\".",
     "evidence": "FLEX–230 H01H103 9/13/11 12:22:18 Heptane 756.5 .2 .75 0 .05 2.3 – .58 9.8 Disruption",
     "evidence_source": "file:NTRS-20150023456.pdf"
    },
    "burning_rate_mm2_s": {
     "min": 0.58,
     "max": 0.58,
     "quality": "reported",
     "raw": ".58",
     "column": "p. 32, Table IX, row FLEX-230",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-230. Table IX column \"Burning rate, mm2/s\": the average burning-rate constant from a linear fit of droplet diameter squared against time (p. 25).",
     "evidence": "FLEX–230 H01H103 9/13/11 12:22:18 Heptane 756.5 .2 .75 0 .05 2.3 – .58 9.8 Disruption",
     "evidence_source": "file:NTRS-20150023456.pdf"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "p. 32, Table IX, row FLEX-230",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-230. Table IX column \"Initial ambient composition, mole fraction, CO2\".",
     "evidence": "FLEX–230 H01H103 9/13/11 12:22:18 Heptane 756.5 .2 .75 0 .05 2.3 – .58 9.8 Disruption",
     "evidence_source": "file:NTRS-20150023456.pdf"
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "p. 32, Table IX, row FLEX-230",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-230. Table IX column \"Test end\".",
     "evidence": "FLEX–230 H01H103 9/13/11 12:22:18 Heptane 756.5 .2 .75 0 .05 2.3 – .58 9.8 Disruption",
     "evidence_source": "file:NTRS-20150023456.pdf"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "p. 32, Table IX, row FLEX-230",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-230. Table IX column \"Fuel\".",
     "evidence": "FLEX–230 H01H103 9/13/11 12:22:18 Heptane 756.5 .2 .75 0 .05 2.3 – .58 9.8 Disruption",
     "evidence_source": "file:NTRS-20150023456.pdf"
    },
    "he_fraction": {
     "min": 0.05,
     "max": 0.05,
     "quality": "reported",
     "raw": ".05",
     "column": "p. 32, Table IX, row FLEX-230",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-230. Table IX column \"Initial ambient composition, mole fraction, HE\".",
     "evidence": "FLEX–230 H01H103 9/13/11 12:22:18 Heptane 756.5 .2 .75 0 .05 2.3 – .58 9.8 Disruption",
     "evidence_source": "file:NTRS-20150023456.pdf"
    },
    "n2_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": ".75",
     "column": "p. 32, Table IX, row FLEX-230",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-230. Table IX column \"Initial ambient composition, mole fraction, N2\".",
     "evidence": "FLEX–230 H01H103 9/13/11 12:22:18 Heptane 756.5 .2 .75 0 .05 2.3 – .58 9.8 Disruption",
     "evidence_source": "file:NTRS-20150023456.pdf"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": ".2",
     "column": "p. 32, Table IX, row FLEX-230",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-230. Table IX column \"Initial ambient composition, mole fraction, O2\".",
     "evidence": "FLEX–230 H01H103 9/13/11 12:22:18 Heptane 756.5 .2 .75 0 .05 2.3 – .58 9.8 Disruption",
     "evidence_source": "file:NTRS-20150023456.pdf"
    },
    "pressure_kpa": {
     "min": 100.858,
     "max": 100.858,
     "quality": "reported",
     "raw": "756.5",
     "column": "p. 32, Table IX, row FLEX-230",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-230. Table IX column \"Ambient pressure, mmHg\", multiplied by 101.325/760 to give kPa.",
     "evidence": "FLEX–230 H01H103 9/13/11 12:22:18 Heptane 756.5 .2 .75 0 .05 2.3 – .58 9.8 Disruption",
     "evidence_source": "file:NTRS-20150023456.pdf"
    },
    "size_mm": {
     "min": 2.3,
     "max": 2.3,
     "quality": "reported",
     "raw": "2.3",
     "column": "p. 32, Table IX, row FLEX-230",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-230. Table IX column \"Droplet initial diameter, mm\".",
     "evidence": "FLEX–230 H01H103 9/13/11 12:22:18 Heptane 756.5 .2 .75 0 .05 2.3 – .58 9.8 Disruption",
     "evidence_source": "file:NTRS-20150023456.pdf"
    },
    "test_date": {
     "text": "2011-09-13",
     "quality": "reported",
     "raw": "9/13/11",
     "column": "p. 32, Table IX, row FLEX-230",
     "note": "From NASA's file NTRS-20150023456.pdf, p. 32, Table IX, row FLEX-230. Table IX column \"Test Date\"; month/day/year.",
     "evidence": "FLEX–230 H01H103 9/13/11 12:22:18 Heptane 756.5 .2 .75 0 .05 2.3 – .58 9.8 Disruption",
     "evidence_source": "file:NTRS-20150023456.pdf"
    }
   }
  },
  {
   "id": "PSI-69/flex/1",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "20CAL08",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.36,
     "max": 25.36,
     "quality": "reported",
     "raw": "298.51",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-001_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.51",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-001_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 4.3,
     "max": 4.3,
     "quality": "reported",
     "raw": "4.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a cabin air, 1.0 atm ambient environment. This is the first FLEX test. The droplet remains in the FOV of all of the cameras for the entire test. The LLUV settings are not optimal and as a result the LLUV data are not reliable. The droplet likely disrupted at the end of the test coincident with flame extinction. The igniters were too bright and overexposed the HiBMS during ignition resulting in the inability to accurately measure the droplet diameter.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a cabin air, 1.0 atm ambient environment. This is the first FLEX test. The droplet remains in the FOV of all of the cameras for the entire test. The LLUV settings are not optimal and as a result the LLUV data are not reliable. The droplet likely disrupted at the end of the test coincident with flame extinction. The igniters were too bright and overexposed the HiBMS during ignition resulting in the inability to accurately measure the droplet diameter.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-001_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a cabin air, 1.0 atm ambient environment. This is the first FLEX test. The droplet remains in the FOV of all of the cameras for the entire test. The LLUV settings are not optimal and as a result the LLUV data are not reliable. The droplet likely disrupted at the end of the test coincident with flame extinction. The igniters were too bright and overexposed the HiBMS during ignition resulting in the inability to accurately measure the droplet diameter.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-001_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.89,
     "max": 0.89,
     "quality": "reported",
     "raw": "0.89",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-001_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-001_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.018,
     "max": 101.018,
     "quality": "reported",
     "raw": "757.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.69,
     "max": 1.69,
     "quality": "reported",
     "raw": "1.69",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-03-05",
     "quality": "reported",
     "raw": "3/5/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/2",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "20CAL10",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.85,
     "max": 26.85,
     "quality": "reported",
     "raw": "300.00",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-002_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.00",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-002_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.6,
     "max": 0.6,
     "quality": "reported",
     "raw": "0.6",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a cabin air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet remains within the FOV of all the cameras and burns to diffusive extinction. This was a 'calibration' run and the LLUV setting was not optimal and as a result the LLUV flame data is not reliable especially near the end of the test. The droplet does not disrupt, but there is clearly something that happens to the flame near the end of the test.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a cabin air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet remains within the FOV of all the cameras and burns to diffusive extinction. This was a 'calibration' run and the LLUV setting was not optimal and as a result the LLUV flame data is not reliable especially near the end of the test. The droplet does not disrupt, but there is clearly something that happens to the flame near the end of the test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-002_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a cabin air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet remains within the FOV of all the cameras and burns to diffusive extinction. This was a 'calibration' run and the LLUV setting was not optimal and as a result the LLUV flame data is not reliable especially near the end of the test. The droplet does not disrupt, but there is clearly something that happens to the flame near the end of the test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-002_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.94,
     "max": 0.94,
     "quality": "reported",
     "raw": "0.94",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-002_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-002_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.592,
     "max": 101.592,
     "quality": "reported",
     "raw": "762",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.86,
     "max": 1.86,
     "quality": "reported",
     "raw": "1.86",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-03-05",
     "quality": "reported",
     "raw": "3/5/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/3",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "20CAL12",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 3,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.48,
     "max": 27.48,
     "quality": "reported",
     "raw": "300.63",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-003_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.63",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-003_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 3.2,
     "max": 3.2,
     "quality": "reported",
     "raw": "3.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.58,
     "max": 0.58,
     "quality": "reported",
     "raw": "0.58",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a cabin air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet remains within the FOV of all the cameras. This was a 'calibration' run using cabin air and the LLUV setting was not optimal as the flame was very difficult to see and measure (especially near the end of the test).",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a cabin air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet remains within the FOV of all the cameras. This was a 'calibration' run using cabin air and the LLUV setting was not optimal as the flame was very difficult to see and measure (especially near the end of the test).",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-003_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a cabin air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet remains within the FOV of all the cameras. This was a 'calibration' run using cabin air and the LLUV setting was not optimal as the flame was very difficult to see and measure (especially near the end of the test).",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-003_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.92,
     "max": 0.92,
     "quality": "reported",
     "raw": "0.92",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-003_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-003_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.885,
     "max": 101.885,
     "quality": "reported",
     "raw": "764.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.61,
     "max": 1.61,
     "quality": "reported",
     "raw": "1.61",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-03-05",
     "quality": "reported",
     "raw": "3/5/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/4",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "30CAL02",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 4,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 24.85,
     "max": 24.85,
     "quality": "reported",
     "raw": "298.00",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-004_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.00",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-004_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 7.64,
     "max": 7.64,
     "quality": "reported",
     "raw": "7.64",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.6,
     "max": 0.6,
     "quality": "reported",
     "raw": "0.6",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "This is a freely deployed methanol droplet burning in cabin air. The droplet drifts S in the HiBMS FOV after deployment and ignition leaving the HiBMS FOV 1/3rd of the way through the burn. There is some evidence of flame disruption prior to extinction, but it is difficult to judge from the color camera images. This was a 'calibration' test point. The igniter overwhelmed the HiBMS and made measuring the droplet impossible until the igniters withdrew. The LLUV setting was not optimal and the flame nearly disappeared from the LLUV 1/2 way through the burn coincident to when there is a noticeable change in the flame behavior in the Color Camera.",
     "quality": "reported",
     "raw": "This is a freely deployed methanol droplet burning in cabin air. The droplet drifts S in the HiBMS FOV after deployment and ignition leaving the HiBMS FOV 1/3rd of the way through the burn. There is some evidence of flame disruption prior to extinction, but it is difficult to judge from the color camera images. This was a 'calibration' test point. The igniter overwhelmed the HiBMS and made measuring the droplet impossible until the igniters withdrew. The LLUV setting was not optimal and the flame nearly disappeared from the LLUV 1/2 way through the burn coincident to when there is a noticeable change in the flame behavior in the Color Camera.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-004_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "This is a freely deployed methanol droplet burning in cabin air. The droplet drifts S in the HiBMS FOV after deployment and ignition leaving the HiBMS FOV 1/3rd of the way through the burn. There is some evidence of flame disruption prior to extinction, but it is difficult to judge from the color camera images. This was a 'calibration' test point. The igniter overwhelmed the HiBMS and made measuring the droplet impossible until the igniters withdrew. The LLUV setting was not optimal and the flame nearly disappeared from the LLUV 1/2 way through the burn coincident to when there is a noticeable change in the flame behavior in the Color Camera.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-004_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-004_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-004_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "760",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.06,
     "max": 2.06,
     "quality": "reported",
     "raw": "2.06",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-03-31",
     "quality": "reported",
     "raw": "3/31/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/5",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "30CAL03",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 5,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 24.85,
     "max": 24.85,
     "quality": "reported",
     "raw": "298.00",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-005_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.00",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-005_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 6.34,
     "max": 6.34,
     "quality": "reported",
     "raw": "6.34",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.48,
     "max": 0.48,
     "quality": "reported",
     "raw": "0.48",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a cabin air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet stays within the FOV of all the cameras. This is a 'calibration' run and the LLUV camera settings were not optimized. As a result, the flame becomes undetectable in the LLUV midway through the burn. The LLUV flame size for this test. There is no evidence of disruptive burning near extinction. The flame, however, seems to shrink quickly after ignition, maybe a small bubble burst.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a cabin air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet stays within the FOV of all the cameras. This is a 'calibration' run and the LLUV camera settings were not optimized. As a result, the flame becomes undetectable in the LLUV midway through the burn. The LLUV flame size for this test. There is no evidence of disruptive burning near extinction. The flame, however, seems to shrink quickly after ignition, maybe a small bubble burst.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-005_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a cabin air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet stays within the FOV of all the cameras. This is a 'calibration' run and the LLUV camera settings were not optimized. As a result, the flame becomes undetectable in the LLUV midway through the burn. The LLUV flame size for this test. There is no evidence of disruptive burning near extinction. The flame, however, seems to shrink quickly after ignition, maybe a small bubble burst.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-005_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.81,
     "max": 0.81,
     "quality": "reported",
     "raw": "0.81",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-005_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-005_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "760",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.92,
     "max": 1.92,
     "quality": "reported",
     "raw": "1.92",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-03-31",
     "quality": "reported",
     "raw": "3/31/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/6",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "40CAL01",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 6,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 24.85,
     "max": 24.85,
     "quality": "reported",
     "raw": "298.00",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-006_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.00",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-006_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 9.6,
     "max": 9.6,
     "quality": "reported",
     "raw": "9.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.51,
     "max": 0.51,
     "quality": "reported",
     "raw": "0.51",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a cabin air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet is misshapen on the neddles before the stretch and deploy. Ignition imparts a significant drift velocity on the droplet to the E. This could be due to a small air bubble that distorted the droplet and then popped when the igniters turned on. The droplet drifts out of the HiBMS FOV and then drifts back in the FOV. The flame extinguishes without disruption. This is a 'calibration' test in cabin air. The flame image in not discernable in the LLUV view late in the flame lifetime because the LLUV settings were not optimized for these tests.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a cabin air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet is misshapen on the neddles before the stretch and deploy. Ignition imparts a significant drift velocity on the droplet to the E. This could be due to a small air bubble that distorted the droplet and then popped when the igniters turned on. The droplet drifts out of the HiBMS FOV and then drifts back in the FOV. The flame extinguishes without disruption. This is a 'calibration' test in cabin air. The flame image in not discernable in the LLUV view late in the flame lifetime because the LLUV settings were not optimized for these tests.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-006_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a cabin air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet is misshapen on the neddles before the stretch and deploy. Ignition imparts a significant drift velocity on the droplet to the E. This could be due to a small air bubble that distorted the droplet and then popped when the igniters turned on. The droplet drifts out of the HiBMS FOV and then drifts back in the FOV. The flame extinguishes without disruption. This is a 'calibration' test in cabin air. The flame image in not discernable in the LLUV view late in the flame lifetime because the LLUV settings were not optimized for these tests.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-006_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.53,
     "max": 1.53,
     "quality": "reported",
     "raw": "1.53",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-006_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-006_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "760",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.54,
     "max": 2.54,
     "quality": "reported",
     "raw": "2.54",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-03-31",
     "quality": "reported",
     "raw": "3/31/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/7",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "20CAL13",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 7,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.29,
     "max": 27.29,
     "quality": "reported",
     "raw": "300.44",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-007_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.44",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-007_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 5.3,
     "max": 5.3,
     "quality": "reported",
     "raw": "5.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a cabin air (nominally 0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet deploys and ignites with little residual velocity and stays within the HiBMS FOV for the entire test. The droplet burns with a very luminous flame that obscures droplet in HiBMS for a large portion of the test. The droplet burns to disruption at a small droplet size with the last part of the droplet history obscured by the luminous flame.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a cabin air (nominally 0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet deploys and ignites with little residual velocity and stays within the HiBMS FOV for the entire test. The droplet burns with a very luminous flame that obscures droplet in HiBMS for a large portion of the test. The droplet burns to disruption at a small droplet size with the last part of the droplet history obscured by the luminous flame.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-007_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a cabin air (nominally 0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet deploys and ignites with little residual velocity and stays within the HiBMS FOV for the entire test. The droplet burns with a very luminous flame that obscures droplet in HiBMS for a large portion of the test. The droplet burns to disruption at a small droplet size with the last part of the droplet history obscured by the luminous flame.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-007_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-007_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-007_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.498,
     "max": 101.498,
     "quality": "reported",
     "raw": "761.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.87,
     "max": 1.87,
     "quality": "reported",
     "raw": "1.87",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-04-10",
     "quality": "reported",
     "raw": "4/10/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/8",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "30CAL06",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 8,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.35,
     "max": 27.35,
     "quality": "reported",
     "raw": "300.50",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-008_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.50",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-008_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 14.8,
     "max": 14.8,
     "quality": "reported",
     "raw": "14.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Freely deployed heptane droplet burning in a cabin air (nominally 0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet drifts SE out of the HiBMS FOV a few seconds after igniter withdraw. Significant sooting is apparent in the HiBMS. The droplet also drifts out of the color camera FOV. It remains in the LLUV FOV for the entire burn. There is a lot of noise in the droplet diameter data because of the soot. The droplet disrupts at the end of the burn (from the LLUV).",
     "quality": "reported",
     "raw": "Freely deployed heptane droplet burning in a cabin air (nominally 0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet drifts SE out of the HiBMS FOV a few seconds after igniter withdraw. Significant sooting is apparent in the HiBMS. The droplet also drifts out of the color camera FOV. It remains in the LLUV FOV for the entire burn. There is a lot of noise in the droplet diameter data because of the soot. The droplet disrupts at the end of the burn (from the LLUV).",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-008_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Freely deployed heptane droplet burning in a cabin air (nominally 0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet drifts SE out of the HiBMS FOV a few seconds after igniter withdraw. Significant sooting is apparent in the HiBMS. The droplet also drifts out of the color camera FOV. It remains in the LLUV FOV for the entire burn. There is a lot of noise in the droplet diameter data because of the soot. The droplet disrupts at the end of the burn (from the LLUV).",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-008_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-008_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-008_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.645,
     "max": 101.645,
     "quality": "reported",
     "raw": "762.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.95,
     "max": 2.95,
     "quality": "reported",
     "raw": "2.95",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-04-10",
     "quality": "reported",
     "raw": "4/10/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/9",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "30CAL07",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 9,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.325,
     "max": 101.325,
     "quality": "reported",
     "raw": "760",
     "column": "Ambient pressure; mmHg"
    },
    "test_date": {
     "text": "2009-04-10",
     "quality": "reported",
     "raw": "4/10/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/10",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "256F002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 10,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.77,
     "max": 27.77,
     "quality": "reported",
     "raw": "300.92",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-010_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.92",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-010_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 13.6,
     "max": 13.6,
     "quality": "reported",
     "raw": "13.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.37,
     "max": 0.37,
     "quality": "reported",
     "raw": "0.37",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.21/0.09/0.70 O2/N2/CO2, 3.0 atm ambient environment. The droplet drifts SE after deployment, hits the igniter, changes direction and quickly moves W out of HiBMS FOV as well as LLUV and color camera FOVs. The HiBMS produced a saturated image that influences the droplet size measurement. The HiBMS backlight was also too strong and the droplet size measurement was a function on which 'quad-slice' of the HiBMS image the droplet was in. There is no burning rate constant and extinction droplet diameter listed because of the short time the droplet was in the HiBMS FOV.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.21/0.09/0.70 O2/N2/CO2, 3.0 atm ambient environment. The droplet drifts SE after deployment, hits the igniter, changes direction and quickly moves W out of HiBMS FOV as well as LLUV and color camera FOVs. The HiBMS produced a saturated image that influences the droplet size measurement. The HiBMS backlight was also too strong and the droplet size measurement was a function on which 'quad-slice' of the HiBMS image the droplet was in. There is no burning rate constant and extinction droplet diameter listed because of the short time the droplet was in the HiBMS FOV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-010_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.21/0.09/0.70 O2/N2/CO2, 3.0 atm ambient environment. The droplet drifts SE after deployment, hits the igniter, changes direction and quickly moves W out of HiBMS FOV as well as LLUV and color camera FOVs. The HiBMS produced a saturated image that influences the droplet size measurement. The HiBMS backlight was also too strong and the droplet size measurement was a function on which 'quad-slice' of the HiBMS image the droplet was in. There is no burning rate constant and extinction droplet diameter listed because of the short time the droplet was in the HiBMS FOV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-010_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-010_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-010_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.09,
     "max": 0.09,
     "quality": "reported",
     "raw": "0.09",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 309.268,
     "max": 309.268,
     "quality": "reported",
     "raw": "2319.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.86,
     "max": 3.86,
     "quality": "reported",
     "raw": "3.86",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-05-22",
     "quality": "reported",
     "raw": "5/22/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/11",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "256R001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 11,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.88,
     "max": 27.88,
     "quality": "reported",
     "raw": "301.03",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-011_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 301.03",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-011_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 16.5,
     "max": 16.5,
     "quality": "reported",
     "raw": "16.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.21/0.09/0.70 O2/N2/CO2, 3.0 atm ambient environment. The droplet drifts SE in the HiBMS FOV after deployment, hits the lower igniter and then drifts E and out of the HiBMS FOV very quickly. The HiBMS and illumination settings were not correct, so the igniters obscure the droplet. The background is also near saturation and the droplet size is a function of the 'quadrant slice' of the HiBMS image it is in. The droplet drifts out of the LLUV FOV, but stays mostly in the color camera FOV.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.21/0.09/0.70 O2/N2/CO2, 3.0 atm ambient environment. The droplet drifts SE in the HiBMS FOV after deployment, hits the lower igniter and then drifts E and out of the HiBMS FOV very quickly. The HiBMS and illumination settings were not correct, so the igniters obscure the droplet. The background is also near saturation and the droplet size is a function of the 'quadrant slice' of the HiBMS image it is in. The droplet drifts out of the LLUV FOV, but stays mostly in the color camera FOV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-011_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.21/0.09/0.70 O2/N2/CO2, 3.0 atm ambient environment. The droplet drifts SE in the HiBMS FOV after deployment, hits the lower igniter and then drifts E and out of the HiBMS FOV very quickly. The HiBMS and illumination settings were not correct, so the igniters obscure the droplet. The background is also near saturation and the droplet size is a function of the 'quadrant slice' of the HiBMS image it is in. The droplet drifts out of the LLUV FOV, but stays mostly in the color camera FOV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-011_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-011_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-011_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.09,
     "max": 0.09,
     "quality": "reported",
     "raw": "0.09",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 309.148,
     "max": 309.148,
     "quality": "reported",
     "raw": "2318.8",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.03,
     "max": 3.03,
     "quality": "reported",
     "raw": "3.03",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-05-22",
     "quality": "reported",
     "raw": "5/22/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/12",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "264F003",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 12,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "co2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "CO initial ambient composition; mole fraction"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.09,
     "max": 0.09,
     "quality": "reported",
     "raw": "0.09",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 309.295,
     "max": 309.295,
     "quality": "reported",
     "raw": "2319.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.74,
     "max": 2.74,
     "quality": "reported",
     "raw": "2.74",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-05-22",
     "quality": "reported",
     "raw": "5/22/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/13",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "256R002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 13,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.97,
     "max": 26.97,
     "quality": "reported",
     "raw": "300.12",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-013_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.12",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-013_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 10.8,
     "max": 10.8,
     "quality": "reported",
     "raw": "10.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.21/0.09/0.70 O2/N2/CO2, 3.0 atm ambient environment (the actual ambient is different because of the issues with the CIR adsorber loop). The droplet drifts W in the HiBMS FOV, hits the igniter and drifts SE after igniter withdraw, leaving the FOV and then reapperaing for a short time before disappearing again. The glow from the igniter influences the droplet size measurement early, the HiBMS and illumination package settings not quite good enough although better than on the earlier tests. The extinction droplet diameter is not listed because the droplet was not in the HiBMS FOV for enough of the test.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.21/0.09/0.70 O2/N2/CO2, 3.0 atm ambient environment (the actual ambient is different because of the issues with the CIR adsorber loop). The droplet drifts W in the HiBMS FOV, hits the igniter and drifts SE after igniter withdraw, leaving the FOV and then reapperaing for a short time before disappearing again. The glow from the igniter influences the droplet size measurement early, the HiBMS and illumination package settings not quite good enough although better than on the earlier tests. The extinction droplet diameter is not listed because the droplet was not in the HiBMS FOV for enough of the test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-013_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.21/0.09/0.70 O2/N2/CO2, 3.0 atm ambient environment (the actual ambient is different because of the issues with the CIR adsorber loop). The droplet drifts W in the HiBMS FOV, hits the igniter and drifts SE after igniter withdraw, leaving the FOV and then reapperaing for a short time before disappearing again. The glow from the igniter influences the droplet size measurement early, the HiBMS and illumination package settings not quite good enough although better than on the earlier tests. The extinction droplet diameter is not listed because the droplet was not in the HiBMS FOV for enough of the test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-013_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-013_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-013_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.09,
     "max": 0.09,
     "quality": "reported",
     "raw": "0.09",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 276.537,
     "max": 276.537,
     "quality": "reported",
     "raw": "2074.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.59,
     "max": 2.59,
     "quality": "reported",
     "raw": "2.59",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-06-25",
     "quality": "reported",
     "raw": "6/25/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/14",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "256F007",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 14,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 24.68,
     "max": 24.68,
     "quality": "reported",
     "raw": "297.83",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-014_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 297.83",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-014_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 11.3,
     "max": 11.3,
     "quality": "reported",
     "raw": "11.3",
     "column": "Burn time; s"
    },
    "co2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.21/0.09/0.70 O2/N2/CO2, 3.0 atm ambient environment. The droplet has a large drift NW in the HiBMS after deployment and ignition (ignition doesn't visually change the motion). The droplet quickly drifts out of the FOV of the HiBMS. The color camera IPSU did not record any images for this test. The droplet also drifts N out of the LLUV FOV before extinction. There is no burning rate or extinction droplet diameter listed because of the limited time the droplet is within the HiBMS FOV.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.21/0.09/0.70 O2/N2/CO2, 3.0 atm ambient environment. The droplet has a large drift NW in the HiBMS after deployment and ignition (ignition doesn't visually change the motion). The droplet quickly drifts out of the FOV of the HiBMS. The color camera IPSU did not record any images for this test. The droplet also drifts N out of the LLUV FOV before extinction. There is no burning rate or extinction droplet diameter listed because of the limited time the droplet is within the HiBMS FOV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-014_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.21/0.09/0.70 O2/N2/CO2, 3.0 atm ambient environment. The droplet has a large drift NW in the HiBMS after deployment and ignition (ignition doesn't visually change the motion). The droplet quickly drifts out of the FOV of the HiBMS. The color camera IPSU did not record any images for this test. The droplet also drifts N out of the LLUV FOV before extinction. There is no burning rate or extinction droplet diameter listed because of the limited time the droplet is within the HiBMS FOV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-014_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-014_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-014_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.09,
     "max": 0.09,
     "quality": "reported",
     "raw": "0.09",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 274.058,
     "max": 274.058,
     "quality": "reported",
     "raw": "2055.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.7,
     "max": 3.7,
     "quality": "reported",
     "raw": "3.7",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-06-29",
     "quality": "reported",
     "raw": "6/29/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/15",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "256F008",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 15,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.05,
     "max": 26.05,
     "quality": "reported",
     "raw": "299.20",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-015_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.20",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-015_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 23.1,
     "max": 23.1,
     "quality": "reported",
     "raw": "23.1",
     "column": "Burn time; s"
    },
    "co2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free floating methanol droplet burning in a 0.21/0.09/0.70 O2/N2/CO2, 3.0 atm ambient environment. The droplet quickly drifts N and out of the HiBMS FOV after ignition. The burning rate constant is not listed since there is in the HiBMS FOV for such a short time. The droplet does not drift out of the FOV of the LLUV, but the IPSU data for the LLUV ends before the flame extinguishes. The droplet drifts NE and out of the Color Camera FOV before the flame extinguishes. The flame from the color camera view is visibly brighter in the direction of the translation, an indication that the convective motion is significantly impacting the flame behavior.",
     "quality": "reported",
     "raw": "Free floating methanol droplet burning in a 0.21/0.09/0.70 O2/N2/CO2, 3.0 atm ambient environment. The droplet quickly drifts N and out of the HiBMS FOV after ignition. The burning rate constant is not listed since there is in the HiBMS FOV for such a short time. The droplet does not drift out of the FOV of the LLUV, but the IPSU data for the LLUV ends before the flame extinguishes. The droplet drifts NE and out of the Color Camera FOV before the flame extinguishes. The flame from the color camera view is visibly brighter in the direction of the translation, an indication that the convective motion is significantly impacting the flame behavior.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-015_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free floating methanol droplet burning in a 0.21/0.09/0.70 O2/N2/CO2, 3.0 atm ambient environment. The droplet quickly drifts N and out of the HiBMS FOV after ignition. The burning rate constant is not listed since there is in the HiBMS FOV for such a short time. The droplet does not drift out of the FOV of the LLUV, but the IPSU data for the LLUV ends before the flame extinguishes. The droplet drifts NE and out of the Color Camera FOV before the flame extinguishes. The flame from the color camera view is visibly brighter in the direction of the translation, an indication that the convective motion is significantly impacting the flame behavior.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-015_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-015_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-015_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.09,
     "max": 0.09,
     "quality": "reported",
     "raw": "0.09",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 275.524,
     "max": 275.524,
     "quality": "reported",
     "raw": "2066.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 4.42,
     "max": 4.42,
     "quality": "reported",
     "raw": "4.42",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-06-29",
     "quality": "reported",
     "raw": "6/29/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/16",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "256F009",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 16,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.88,
     "max": 26.88,
     "quality": "reported",
     "raw": "300.03",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-016_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.03",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-016_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 3.4,
     "max": 3.4,
     "quality": "reported",
     "raw": "3.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.53,
     "max": 0.53,
     "quality": "reported",
     "raw": "0.53",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a high 0.21/0.09/0.70 O2/N2/CO2, 3.0 atm ambient environment. The droplet drifts and hits the igniter before igniter withdraw and drifts slowly W in the HiBMS FOV, but stays in the FOVs of all the cameras for the entire test. There was significant translation in the HiBMS FOV during the test.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a high 0.21/0.09/0.70 O2/N2/CO2, 3.0 atm ambient environment. The droplet drifts and hits the igniter before igniter withdraw and drifts slowly W in the HiBMS FOV, but stays in the FOVs of all the cameras for the entire test. There was significant translation in the HiBMS FOV during the test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-016_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a high 0.21/0.09/0.70 O2/N2/CO2, 3.0 atm ambient environment. The droplet drifts and hits the igniter before igniter withdraw and drifts slowly W in the HiBMS FOV, but stays in the FOVs of all the cameras for the entire test. There was significant translation in the HiBMS FOV during the test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-016_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-016_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-016_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.09,
     "max": 0.09,
     "quality": "reported",
     "raw": "0.09",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 276.257,
     "max": 276.257,
     "quality": "reported",
     "raw": "2072.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.66,
     "max": 1.66,
     "quality": "reported",
     "raw": "1.66",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-06-29",
     "quality": "reported",
     "raw": "6/29/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/17",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "240R003",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 17,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.57,
     "max": 26.57,
     "quality": "reported",
     "raw": "299.72",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-017_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.72",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-017_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 2.4,
     "max": 2.4,
     "quality": "reported",
     "raw": "2.4",
     "column": "Burn time; s"
    },
    "co2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.21/0.09/0.70 O2/N2/CO2, 3.0 atm ambient environment. The droplet drifts E in the HiBMS FOV after deployment, hits the igniter and then drifts N. The droplet immediately begins to grow disrupts and finally shatters that causes flame extinction. This was likely due to a gas bubble trapped in the droplet after deployment.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.21/0.09/0.70 O2/N2/CO2, 3.0 atm ambient environment. The droplet drifts E in the HiBMS FOV after deployment, hits the igniter and then drifts N. The droplet immediately begins to grow disrupts and finally shatters that causes flame extinction. This was likely due to a gas bubble trapped in the droplet after deployment.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-017_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.21/0.09/0.70 O2/N2/CO2, 3.0 atm ambient environment. The droplet drifts E in the HiBMS FOV after deployment, hits the igniter and then drifts N. The droplet immediately begins to grow disrupts and finally shatters that causes flame extinction. This was likely due to a gas bubble trapped in the droplet after deployment.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-017_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-017_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-017_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.09,
     "max": 0.09,
     "quality": "reported",
     "raw": "0.09",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 206.076,
     "max": 206.076,
     "quality": "reported",
     "raw": "1545.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.67,
     "max": 2.67,
     "quality": "reported",
     "raw": "2.67",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-07-01",
     "quality": "reported",
     "raw": "7/1/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/18",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "248F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 18,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.57,
     "max": 27.57,
     "quality": "reported",
     "raw": "300.72",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-018_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.72",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-018_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.61,
     "max": 0.61,
     "quality": "reported",
     "raw": "0.61",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.21/0.09/0.70 O2/N2/CO2, 2.0 atm ambient environment. There is a luminous yellow flame immediately after ignition, with the HiBMS view showing significant soot formation. The luminous flame disappears with a dim blue flame surrounding the droplet. The flame oscillates and then appears to extinguish in both the LLUV and color camera views. The droplet continues to vaporize vigorously though and the radiometer does not settle to its baseline value. There is 'hazing' around the droplet in the HiBMS view during combustion, almost like there is significant internal liquid motion. The droplet disrupts after it drifts out of the HiBMS FOV. There was likely cool flame burning after visible flame extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.21/0.09/0.70 O2/N2/CO2, 2.0 atm ambient environment. There is a luminous yellow flame immediately after ignition, with the HiBMS view showing significant soot formation. The luminous flame disappears with a dim blue flame surrounding the droplet. The flame oscillates and then appears to extinguish in both the LLUV and color camera views. The droplet continues to vaporize vigorously though and the radiometer does not settle to its baseline value. There is 'hazing' around the droplet in the HiBMS view during combustion, almost like there is significant internal liquid motion. The droplet disrupts after it drifts out of the HiBMS FOV. There was likely cool flame burning after visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-018_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.21/0.09/0.70 O2/N2/CO2, 2.0 atm ambient environment. There is a luminous yellow flame immediately after ignition, with the HiBMS view showing significant soot formation. The luminous flame disappears with a dim blue flame surrounding the droplet. The flame oscillates and then appears to extinguish in both the LLUV and color camera views. The droplet continues to vaporize vigorously though and the radiometer does not settle to its baseline value. There is 'hazing' around the droplet in the HiBMS view during combustion, almost like there is significant internal liquid motion. The droplet disrupts after it drifts out of the HiBMS FOV. There was likely cool flame burning after visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-018_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.77,
     "max": 1.77,
     "quality": "reported",
     "raw": "1.77",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-018_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-018_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.09,
     "max": 0.09,
     "quality": "reported",
     "raw": "0.09",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 207.156,
     "max": 207.156,
     "quality": "reported",
     "raw": "1553.8",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.74,
     "max": 2.74,
     "quality": "reported",
     "raw": "2.74",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-07-01",
     "quality": "reported",
     "raw": "7/1/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/19",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "196F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 19,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.86,
     "max": 27.86,
     "quality": "reported",
     "raw": "301.01",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-019_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 301.01",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-019_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 4.2,
     "max": 4.2,
     "quality": "reported",
     "raw": "4.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.9,
     "max": 0.9,
     "quality": "reported",
     "raw": "0.9",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.34/0.66 O2/N2, 0.70 atm ambient environment. The droplet is almost motionless after deployment, but then a large impulse when the igniters start to heat moves droplet SW and quickly out of HiBMS FOV. The droplet is nearly out of the FOV when the igniters begin to move away from the droplet. There is significant sooting with large aggregates. The data from this test are probably not reliable.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.34/0.66 O2/N2, 0.70 atm ambient environment. The droplet is almost motionless after deployment, but then a large impulse when the igniters start to heat moves droplet SW and quickly out of HiBMS FOV. The droplet is nearly out of the FOV when the igniters begin to move away from the droplet. There is significant sooting with large aggregates. The data from this test are probably not reliable.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-019_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.34/0.66 O2/N2, 0.70 atm ambient environment. The droplet is almost motionless after deployment, but then a large impulse when the igniters start to heat moves droplet SW and quickly out of HiBMS FOV. The droplet is nearly out of the FOV when the igniters begin to move away from the droplet. There is significant sooting with large aggregates. The data from this test are probably not reliable.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-019_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-019_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-019_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.66,
     "max": 0.66,
     "quality": "reported",
     "raw": "0.66",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.34,
     "max": 0.34,
     "quality": "reported",
     "raw": "0.34",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.8741,
     "max": 71.8741,
     "quality": "reported",
     "raw": "539.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.39,
     "max": 3.39,
     "quality": "reported",
     "raw": "3.39",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-08-26",
     "quality": "reported",
     "raw": "8/26/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/20",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "192F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 20,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "300.14",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-020_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.14",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-020_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 17.4,
     "max": 17.4,
     "quality": "reported",
     "raw": "17.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.53,
     "max": 0.53,
     "quality": "reported",
     "raw": "0.53",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.34/0.66 O2/N2, 0.70 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition. It is in the HiBMS for only a short time, and also drifts quickly out of the Color Camera FOV. It remains in the LLUV FOV for the entire burn and seems to burn to a very small extinction droplet size or completion.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.34/0.66 O2/N2, 0.70 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition. It is in the HiBMS for only a short time, and also drifts quickly out of the Color Camera FOV. It remains in the LLUV FOV for the entire burn and seems to burn to a very small extinction droplet size or completion.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-020_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.34/0.66 O2/N2, 0.70 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition. It is in the HiBMS for only a short time, and also drifts quickly out of the Color Camera FOV. It remains in the LLUV FOV for the entire burn and seems to burn to a very small extinction droplet size or completion.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-020_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.56,
     "max": 1.56,
     "quality": "reported",
     "raw": "1.56",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-020_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-020_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.66,
     "max": 0.66,
     "quality": "reported",
     "raw": "0.66",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.34,
     "max": 0.34,
     "quality": "reported",
     "raw": "0.34",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.9274,
     "max": 71.9274,
     "quality": "reported",
     "raw": "539.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.4,
     "max": 3.4,
     "quality": "reported",
     "raw": "3.4",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-10-24",
     "quality": "reported",
     "raw": "10/24/09",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/21",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "192F002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 21,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.3,
     "max": 27.3,
     "quality": "reported",
     "raw": "300.45",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-021_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.45",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-021_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 17.8,
     "max": 17.8,
     "quality": "reported",
     "raw": "17.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.66,
     "max": 0.66,
     "quality": "reported",
     "raw": "0.66",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "This is a freely-floating methanol droplet burning in a 0.34/0.66 O2/N2, 0.70 atm ambient environment. This was the first successful test after switching from the high CO2, high pressure ambients where we had significant deployment problems. The droplet has a high burning rate and stays in the HiBMS FOV the entire test. Before flame extinction, the droplet distorts and eventually shatters coincident with flame extinction.",
     "quality": "reported",
     "raw": "This is a freely-floating methanol droplet burning in a 0.34/0.66 O2/N2, 0.70 atm ambient environment. This was the first successful test after switching from the high CO2, high pressure ambients where we had significant deployment problems. The droplet has a high burning rate and stays in the HiBMS FOV the entire test. Before flame extinction, the droplet distorts and eventually shatters coincident with flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-021_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "This is a freely-floating methanol droplet burning in a 0.34/0.66 O2/N2, 0.70 atm ambient environment. This was the first successful test after switching from the high CO2, high pressure ambients where we had significant deployment problems. The droplet has a high burning rate and stays in the HiBMS FOV the entire test. Before flame extinction, the droplet distorts and eventually shatters coincident with flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-021_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.95,
     "max": 0.95,
     "quality": "reported",
     "raw": "0.95",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-021_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-021_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.66,
     "max": 0.66,
     "quality": "reported",
     "raw": "0.66",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.34,
     "max": 0.34,
     "quality": "reported",
     "raw": "0.34",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 72.0741,
     "max": 72.0741,
     "quality": "reported",
     "raw": "540.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.49,
     "max": 3.49,
     "quality": "reported",
     "raw": "3.49",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-10-24",
     "quality": "reported",
     "raw": "10/24/09",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/22",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "192F003",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 22,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.36,
     "max": 27.36,
     "quality": "reported",
     "raw": "300.51",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-022_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.51",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-022_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 18.2,
     "max": 18.2,
     "quality": "reported",
     "raw": "18.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.65,
     "max": 0.65,
     "quality": "reported",
     "raw": "0.65",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Freely-floating methanol droplet droplet burning in a 0.34/0.66 O2/N2, 0.7 atm ambient environment. The droplet stays in the HiBMS FOV for the entire test and drifts slowly SSE during the test. The droplet begins to change shape, becomes almost oblong with a pointed end (from the video) before disrupting. The disruption is coincident with flame extinction.",
     "quality": "reported",
     "raw": "Freely-floating methanol droplet droplet burning in a 0.34/0.66 O2/N2, 0.7 atm ambient environment. The droplet stays in the HiBMS FOV for the entire test and drifts slowly SSE during the test. The droplet begins to change shape, becomes almost oblong with a pointed end (from the video) before disrupting. The disruption is coincident with flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-022_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Freely-floating methanol droplet droplet burning in a 0.34/0.66 O2/N2, 0.7 atm ambient environment. The droplet stays in the HiBMS FOV for the entire test and drifts slowly SSE during the test. The droplet begins to change shape, becomes almost oblong with a pointed end (from the video) before disrupting. The disruption is coincident with flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-022_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-022_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-022_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.66,
     "max": 0.66,
     "quality": "reported",
     "raw": "0.66",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.34,
     "max": 0.34,
     "quality": "reported",
     "raw": "0.34",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 72.0608,
     "max": 72.0608,
     "quality": "reported",
     "raw": "540.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.5,
     "max": 3.5,
     "quality": "reported",
     "raw": "3.5",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-10-24",
     "quality": "reported",
     "raw": "10/24/09",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/23",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "196F002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 23,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 24.85,
     "max": 24.85,
     "quality": "reported",
     "raw": "298.00",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-023_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.00",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-023_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 13.1,
     "max": 13.1,
     "quality": "reported",
     "raw": "13.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.73,
     "max": 0.73,
     "quality": "reported",
     "raw": "0.73",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Freely floating heptane droplet burning in a 0.37/0.66 O2/N2, 0.70 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition. It drifts partially out of the FOV, but then drifts back in. Ther is significant sooting with large agglomerates throughout the test.",
     "quality": "reported",
     "raw": "Freely floating heptane droplet burning in a 0.37/0.66 O2/N2, 0.70 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition. It drifts partially out of the FOV, but then drifts back in. Ther is significant sooting with large agglomerates throughout the test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-023_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Freely floating heptane droplet burning in a 0.37/0.66 O2/N2, 0.70 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition. It drifts partially out of the FOV, but then drifts back in. Ther is significant sooting with large agglomerates throughout the test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-023_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-023_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-023_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.66,
     "max": 0.66,
     "quality": "reported",
     "raw": "0.66",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.34,
     "max": 0.34,
     "quality": "reported",
     "raw": "0.34",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 72.2341,
     "max": 72.2341,
     "quality": "reported",
     "raw": "541.8",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.01,
     "max": 3.01,
     "quality": "reported",
     "raw": "3.01",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-10-24",
     "quality": "reported",
     "raw": "10/24/09",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/24",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "196F003",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 24,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.83,
     "max": 27.83,
     "quality": "reported",
     "raw": "300.98",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-024_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.98",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-024_TestSheet.txt"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.34/0.66 O2/N2, 0.70 atm ambient environment. The HiBMS IPSU did not record any images for this test. There appeared to be a possible needle fire. The color camera and LLUV IPSUs stopped recording before the test was complete. The LLUV images were recorded at 8-bit depth and no 12-bit which resulted in more uncertainty in the LLUV flame size measurements.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.34/0.66 O2/N2, 0.70 atm ambient environment. The HiBMS IPSU did not record any images for this test. There appeared to be a possible needle fire. The color camera and LLUV IPSUs stopped recording before the test was complete. The LLUV images were recorded at 8-bit depth and no 12-bit which resulted in more uncertainty in the LLUV flame size measurements.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-024_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.34/0.66 O2/N2, 0.70 atm ambient environment. The HiBMS IPSU did not record any images for this test. There appeared to be a possible needle fire. The color camera and LLUV IPSUs stopped recording before the test was complete. The LLUV images were recorded at 8-bit depth and no 12-bit which resulted in more uncertainty in the LLUV flame size measurements.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-024_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-024_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-024_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.66,
     "max": 0.66,
     "quality": "reported",
     "raw": "0.66",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.34,
     "max": 0.34,
     "quality": "reported",
     "raw": "0.34",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 72.3674,
     "max": 72.3674,
     "quality": "reported",
     "raw": "542.8",
     "column": "Ambient pressure; mmHg"
    },
    "test_date": {
     "text": "2009-10-24",
     "quality": "reported",
     "raw": "10/24/09",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/25",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "191R001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 25,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.92,
     "max": 25.92,
     "quality": "reported",
     "raw": "299.07",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-025_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.07",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-025_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 10.3,
     "max": 10.3,
     "quality": "reported",
     "raw": "10.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.65,
     "max": 0.65,
     "quality": "reported",
     "raw": "0.65",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Freely-floating methanol droplet burning in a 0.30/0.70 O2/N2, 0.7 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition, leaving the FOV 1/2 through the burn before burning to near completion.",
     "quality": "reported",
     "raw": "Freely-floating methanol droplet burning in a 0.30/0.70 O2/N2, 0.7 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition, leaving the FOV 1/2 through the burn before burning to near completion.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-025_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Freely-floating methanol droplet burning in a 0.30/0.70 O2/N2, 0.7 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition, leaving the FOV 1/2 through the burn before burning to near completion.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-025_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-025_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-025_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.6341,
     "max": 71.6341,
     "quality": "reported",
     "raw": "537.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.6,
     "max": 2.6,
     "quality": "reported",
     "raw": "2.6",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-11-09",
     "quality": "reported",
     "raw": "11/9/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/26",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "191F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 26,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.17,
     "max": 26.17,
     "quality": "reported",
     "raw": "299.32",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-026_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.32",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-026_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 22.2,
     "max": 22.2,
     "quality": "reported",
     "raw": "22.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.62,
     "max": 0.62,
     "quality": "reported",
     "raw": "0.62",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Freely-floating methanol droplet burning in a 0.30/0.80 O2/N2, 0.70 atm ambient environment. The droplet drifts NW out of the HiBMS FOV about half way through the burn. The droplet appears to burn to completion or a very small size before a disruption that causes flame extinction.",
     "quality": "reported",
     "raw": "Freely-floating methanol droplet burning in a 0.30/0.80 O2/N2, 0.70 atm ambient environment. The droplet drifts NW out of the HiBMS FOV about half way through the burn. The droplet appears to burn to completion or a very small size before a disruption that causes flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-026_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Freely-floating methanol droplet burning in a 0.30/0.80 O2/N2, 0.70 atm ambient environment. The droplet drifts NW out of the HiBMS FOV about half way through the burn. The droplet appears to burn to completion or a very small size before a disruption that causes flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-026_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-026_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-026_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.7808,
     "max": 71.7808,
     "quality": "reported",
     "raw": "538.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.63,
     "max": 3.63,
     "quality": "reported",
     "raw": "3.63",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-11-09",
     "quality": "reported",
     "raw": "11/9/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/27",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "195F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 27,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.18,
     "max": 27.18,
     "quality": "reported",
     "raw": "300.33",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-027_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.33",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-027_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 23.8,
     "max": 23.8,
     "quality": "reported",
     "raw": "23.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.64,
     "max": 0.64,
     "quality": "reported",
     "raw": "0.64",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Freely-floating heptane droplet burning in a 0.30/0.70 O2/N2, 0.7 atm ambient envirronment. The droplet drifts W in the HiBMS FOV after deployment and ignition and out of the FOV 2/3rds of the way through the test. There is a bright luminous flame that dims to blue about 1/3 the way through the burn (the transition from luminous yellow to dim blue is relatively fast). There is significant sooting with large soot agglomerates present throughout the burn. There is a disruption that is coincident with flame extinction.",
     "quality": "reported",
     "raw": "Freely-floating heptane droplet burning in a 0.30/0.70 O2/N2, 0.7 atm ambient envirronment. The droplet drifts W in the HiBMS FOV after deployment and ignition and out of the FOV 2/3rds of the way through the test. There is a bright luminous flame that dims to blue about 1/3 the way through the burn (the transition from luminous yellow to dim blue is relatively fast). There is significant sooting with large soot agglomerates present throughout the burn. There is a disruption that is coincident with flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-027_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Freely-floating heptane droplet burning in a 0.30/0.70 O2/N2, 0.7 atm ambient envirronment. The droplet drifts W in the HiBMS FOV after deployment and ignition and out of the FOV 2/3rds of the way through the test. There is a bright luminous flame that dims to blue about 1/3 the way through the burn (the transition from luminous yellow to dim blue is relatively fast). There is significant sooting with large soot agglomerates present throughout the burn. There is a disruption that is coincident with flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-027_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-027_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-027_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 72.0874,
     "max": 72.0874,
     "quality": "reported",
     "raw": "540.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.87,
     "max": 3.87,
     "quality": "reported",
     "raw": "3.87",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-11-09",
     "quality": "reported",
     "raw": "11/9/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/28",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "195F002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 28,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.32,
     "max": 27.32,
     "quality": "reported",
     "raw": "300.47",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-028_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.47",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-028_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 17.3,
     "max": 17.3,
     "quality": "reported",
     "raw": "17.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.64,
     "max": 0.64,
     "quality": "reported",
     "raw": "0.64",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Freely-floating heptane droplet burning in a 0.30/0.70 O2/N2, 0.7 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition and out of the FOV after approximately 2/3 of the burn is complete. There is a bright luminous flame that persists throughout the droplet lifetime. There is significant sooting with large soot agglomerates present throughout the burn. There is a disruption that is coincident with flame extinction.",
     "quality": "reported",
     "raw": "Freely-floating heptane droplet burning in a 0.30/0.70 O2/N2, 0.7 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition and out of the FOV after approximately 2/3 of the burn is complete. There is a bright luminous flame that persists throughout the droplet lifetime. There is significant sooting with large soot agglomerates present throughout the burn. There is a disruption that is coincident with flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-028_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Freely-floating heptane droplet burning in a 0.30/0.70 O2/N2, 0.7 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition and out of the FOV after approximately 2/3 of the burn is complete. There is a bright luminous flame that persists throughout the droplet lifetime. There is significant sooting with large soot agglomerates present throughout the burn. There is a disruption that is coincident with flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-028_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-028_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-028_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.9541,
     "max": 71.9541,
     "quality": "reported",
     "raw": "539.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.36,
     "max": 3.36,
     "quality": "reported",
     "raw": "3.36",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-11-09",
     "quality": "reported",
     "raw": "11/9/2009",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/29",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "178R001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 29,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.97,
     "max": 25.97,
     "quality": "reported",
     "raw": "299.12",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-029_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.12",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-029_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 10.4,
     "max": 10.4,
     "quality": "reported",
     "raw": "10.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.74,
     "max": 0.74,
     "quality": "reported",
     "raw": "0.74",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Freely-floating methanol droplet burning in a 0.360/0.80 O2/N2, 1.0 atm ambient environment. The droplet drifts S out of the HiBMS FOV about 1/3 the way through the test. The droplet also drifts out of the color camera view before the flame extinguishes. The flame stays in the LLUV FOV for the entire test and does not appear to disrupt when the flame extinguishes. Based on the extrapolated droplet history and the duration of the burn, the droplet burned to completion or a very small droplet size.",
     "quality": "reported",
     "raw": "Freely-floating methanol droplet burning in a 0.360/0.80 O2/N2, 1.0 atm ambient environment. The droplet drifts S out of the HiBMS FOV about 1/3 the way through the test. The droplet also drifts out of the color camera view before the flame extinguishes. The flame stays in the LLUV FOV for the entire test and does not appear to disrupt when the flame extinguishes. Based on the extrapolated droplet history and the duration of the burn, the droplet burned to completion or a very small droplet size.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-029_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Freely-floating methanol droplet burning in a 0.360/0.80 O2/N2, 1.0 atm ambient environment. The droplet drifts S out of the HiBMS FOV about 1/3 the way through the test. The droplet also drifts out of the color camera view before the flame extinguishes. The flame stays in the LLUV FOV for the entire test and does not appear to disrupt when the flame extinguishes. Based on the extrapolated droplet history and the duration of the burn, the droplet burned to completion or a very small droplet size.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-029_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-029_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-029_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.245,
     "max": 102.245,
     "quality": "reported",
     "raw": "766.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.57,
     "max": 2.57,
     "quality": "reported",
     "raw": "2.57",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-11-13",
     "quality": "reported",
     "raw": "11/13/09",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/30",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "178F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 30,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.55,
     "max": 26.55,
     "quality": "reported",
     "raw": "299.70",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-030_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.70",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-030_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 15.6,
     "max": 15.6,
     "quality": "reported",
     "raw": "15.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Freely-floating methanol droplet burning in a 0.30/0.70 O2/N2, 1.0 atm ambient environment. The droplet remains in the FOV of all the cameras for the entire test. The droplet drifts S, then E, then N in the HiBMS FOV. Coincident with flame extinction, the droplet becomes almost 'football'-shaped. The oblong shape with a pointed end remains stationary and fixed for several seconds (until recording ended). The Dext is the actual extinction diameter, but may be influenced by the shape change.",
     "quality": "reported",
     "raw": "Freely-floating methanol droplet burning in a 0.30/0.70 O2/N2, 1.0 atm ambient environment. The droplet remains in the FOV of all the cameras for the entire test. The droplet drifts S, then E, then N in the HiBMS FOV. Coincident with flame extinction, the droplet becomes almost 'football'-shaped. The oblong shape with a pointed end remains stationary and fixed for several seconds (until recording ended). The Dext is the actual extinction diameter, but may be influenced by the shape change.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-030_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Freely-floating methanol droplet burning in a 0.30/0.70 O2/N2, 1.0 atm ambient environment. The droplet remains in the FOV of all the cameras for the entire test. The droplet drifts S, then E, then N in the HiBMS FOV. Coincident with flame extinction, the droplet becomes almost 'football'-shaped. The oblong shape with a pointed end remains stationary and fixed for several seconds (until recording ended). The Dext is the actual extinction diameter, but may be influenced by the shape change.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-030_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.32,
     "max": 1.32,
     "quality": "reported",
     "raw": "1.32",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-030_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-030_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.552,
     "max": 102.552,
     "quality": "reported",
     "raw": "769.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.26,
     "max": 3.26,
     "quality": "reported",
     "raw": "3.26",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-11-13",
     "quality": "reported",
     "raw": "11/13/09",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/31",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "182F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 31,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.89,
     "max": 26.89,
     "quality": "reported",
     "raw": "300.04",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-031_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.04",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-031_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 18.4,
     "max": 18.4,
     "quality": "reported",
     "raw": "18.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.30/0.70 O2/N2, 1.0 atm ambient environment. The droplet drifts S in the HiBMS FOV and leaves the FOV shortly after igniter withdraw. There is a significant amount of sooting and a large soot shell surrounding the droplet. The droplet drifts out of the color camera FOV, but starys in the LLUV FOV. The droplet burns to disruption at a small size.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.30/0.70 O2/N2, 1.0 atm ambient environment. The droplet drifts S in the HiBMS FOV and leaves the FOV shortly after igniter withdraw. There is a significant amount of sooting and a large soot shell surrounding the droplet. The droplet drifts out of the color camera FOV, but starys in the LLUV FOV. The droplet burns to disruption at a small size.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-031_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.30/0.70 O2/N2, 1.0 atm ambient environment. The droplet drifts S in the HiBMS FOV and leaves the FOV shortly after igniter withdraw. There is a significant amount of sooting and a large soot shell surrounding the droplet. The droplet drifts out of the color camera FOV, but starys in the LLUV FOV. The droplet burns to disruption at a small size.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-031_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-031_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-031_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.725,
     "max": 102.725,
     "quality": "reported",
     "raw": "770.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.39,
     "max": 3.39,
     "quality": "reported",
     "raw": "3.39",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-11-13",
     "quality": "reported",
     "raw": "11/13/09",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/32",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "182F002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 32,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.1,
     "max": 27.1,
     "quality": "reported",
     "raw": "300.25",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-032_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.25",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-032_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 14,
     "max": 14,
     "quality": "reported",
     "raw": "14",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.68,
     "max": 0.68,
     "quality": "reported",
     "raw": "0.68",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Freely-floating heptane droplet burning in a 0.30/0.70 O2/N2, 1.0 atm ambient environment. Significant sooting with large agglomerates throughout the test. A very luminous flame that persists throughout the droplet lifetime until disruptive extinction. The droplet drifts NW out of the HiBMS FOV 1/3rd of the way through the test. It remains in the LLUV and color camera FOVs the entire test. The degree of sooting made accurate measurement of the droplet size difficult.",
     "quality": "reported",
     "raw": "Freely-floating heptane droplet burning in a 0.30/0.70 O2/N2, 1.0 atm ambient environment. Significant sooting with large agglomerates throughout the test. A very luminous flame that persists throughout the droplet lifetime until disruptive extinction. The droplet drifts NW out of the HiBMS FOV 1/3rd of the way through the test. It remains in the LLUV and color camera FOVs the entire test. The degree of sooting made accurate measurement of the droplet size difficult.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-032_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Freely-floating heptane droplet burning in a 0.30/0.70 O2/N2, 1.0 atm ambient environment. Significant sooting with large agglomerates throughout the test. A very luminous flame that persists throughout the droplet lifetime until disruptive extinction. The droplet drifts NW out of the HiBMS FOV 1/3rd of the way through the test. It remains in the LLUV and color camera FOVs the entire test. The degree of sooting made accurate measurement of the droplet size difficult.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-032_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-032_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-032_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.792,
     "max": 102.792,
     "quality": "reported",
     "raw": "771",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.07,
     "max": 3.07,
     "quality": "reported",
     "raw": "3.07",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-11-13",
     "quality": "reported",
     "raw": "11/13/09",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/33",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "177R002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 33,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.99,
     "max": 25.99,
     "quality": "reported",
     "raw": "299.14",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-033_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.14",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-033_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 11.4,
     "max": 11.4,
     "quality": "reported",
     "raw": "11.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.48,
     "max": 0.48,
     "quality": "reported",
     "raw": "0.48",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Freely-floating methanol droplet burning in a 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet drifts slighly N and then E in the HiBMS FOV. It evenutally leaves the HiBMS FOV, but well after extinction. The color camera IPSU did not record any images after deployment for this test.",
     "quality": "reported",
     "raw": "Freely-floating methanol droplet burning in a 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet drifts slighly N and then E in the HiBMS FOV. It evenutally leaves the HiBMS FOV, but well after extinction. The color camera IPSU did not record any images after deployment for this test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-033_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Freely-floating methanol droplet burning in a 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet drifts slighly N and then E in the HiBMS FOV. It evenutally leaves the HiBMS FOV, but well after extinction. The color camera IPSU did not record any images after deployment for this test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-033_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.25,
     "max": 1.25,
     "quality": "reported",
     "raw": "1.25",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-033_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-033_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.925,
     "max": 101.925,
     "quality": "reported",
     "raw": "764.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.62,
     "max": 2.62,
     "quality": "reported",
     "raw": "2.62",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-11-27",
     "quality": "reported",
     "raw": "11/27/09",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/34",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "177F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 34,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.85,
     "max": 26.85,
     "quality": "reported",
     "raw": "300.00",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-034_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.00",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-034_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 27.3,
     "max": 27.3,
     "quality": "reported",
     "raw": "27.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.44,
     "max": 0.44,
     "quality": "reported",
     "raw": "0.44",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Freely-floating methanol droplet burning in a nominally air (0.21/0.79 O2/N2, 1.0 atm) ambient environment. The droplet is almost motionless after deployment and ignition. It slowly starts drifting N in the HiBMS FOV, then starts moving N much quicker and out of the HiBMS FOV about 1/2 way through the test. The color camera IPSU did not record any images for this test. It is unclear from the LLUV whether the droplet disrupted coincident with flame extinction. There is no extinction droplet diameter listed since the droplet was out of the HiBMS FOV for such a long time near visible flame extinction.",
     "quality": "reported",
     "raw": "Freely-floating methanol droplet burning in a nominally air (0.21/0.79 O2/N2, 1.0 atm) ambient environment. The droplet is almost motionless after deployment and ignition. It slowly starts drifting N in the HiBMS FOV, then starts moving N much quicker and out of the HiBMS FOV about 1/2 way through the test. The color camera IPSU did not record any images for this test. It is unclear from the LLUV whether the droplet disrupted coincident with flame extinction. There is no extinction droplet diameter listed since the droplet was out of the HiBMS FOV for such a long time near visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-034_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Freely-floating methanol droplet burning in a nominally air (0.21/0.79 O2/N2, 1.0 atm) ambient environment. The droplet is almost motionless after deployment and ignition. It slowly starts drifting N in the HiBMS FOV, then starts moving N much quicker and out of the HiBMS FOV about 1/2 way through the test. The color camera IPSU did not record any images for this test. It is unclear from the LLUV whether the droplet disrupted coincident with flame extinction. There is no extinction droplet diameter listed since the droplet was out of the HiBMS FOV for such a long time near visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-034_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-034_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-034_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.352,
     "max": 102.352,
     "quality": "reported",
     "raw": "767.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.89,
     "max": 3.89,
     "quality": "reported",
     "raw": "3.89",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-11-27",
     "quality": "reported",
     "raw": "11/27/09",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/35",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "181F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 35,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.16,
     "max": 27.16,
     "quality": "reported",
     "raw": "300.31",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-035_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.31",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-035_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8.9,
     "max": 8.9,
     "quality": "reported",
     "raw": "8.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.43,
     "max": 0.43,
     "quality": "reported",
     "raw": "0.43",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet in a nominally air (0.21/0.79 O2/N2, 1.0 atm) ambient environment. The droplet stays in the HiBMS FOV for the entire test including a long time after visible flame extinction. The flame oscillates before visible flame extinction, apparent in both the LLUV and color camera views. After flame extinction, the droplet vaporizes very vigorously with a nearly perfectly linear D^2 vs. time behavior. The vaporization rate is only slightly lower than the burning rate constant before flame extinction. The droplet vaporization rate then plateaus and this is coincident with the formation of a very large vapor cloud. This behavior is indicative of cool flame burning and extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet in a nominally air (0.21/0.79 O2/N2, 1.0 atm) ambient environment. The droplet stays in the HiBMS FOV for the entire test including a long time after visible flame extinction. The flame oscillates before visible flame extinction, apparent in both the LLUV and color camera views. After flame extinction, the droplet vaporizes very vigorously with a nearly perfectly linear D^2 vs. time behavior. The vaporization rate is only slightly lower than the burning rate constant before flame extinction. The droplet vaporization rate then plateaus and this is coincident with the formation of a very large vapor cloud. This behavior is indicative of cool flame burning and extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-035_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet in a nominally air (0.21/0.79 O2/N2, 1.0 atm) ambient environment. The droplet stays in the HiBMS FOV for the entire test including a long time after visible flame extinction. The flame oscillates before visible flame extinction, apparent in both the LLUV and color camera views. After flame extinction, the droplet vaporizes very vigorously with a nearly perfectly linear D^2 vs. time behavior. The vaporization rate is only slightly lower than the burning rate constant before flame extinction. The droplet vaporization rate then plateaus and this is coincident with the formation of a very large vapor cloud. This behavior is indicative of cool flame burning and extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-035_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.34,
     "max": 3.34,
     "quality": "reported",
     "raw": "3.34",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-035_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-035_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.405,
     "max": 102.405,
     "quality": "reported",
     "raw": "768.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.85,
     "max": 3.85,
     "quality": "reported",
     "raw": "3.85",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-11-27",
     "quality": "reported",
     "raw": "11/27/09",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/36",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "190R002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 36,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.7,
     "max": 26.7,
     "quality": "reported",
     "raw": "299.85",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-036_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.85",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-036_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 7.1,
     "max": 7.1,
     "quality": "reported",
     "raw": "7.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.21/0.79 O2/N2, 0.70 atm ambient environment. The droplet remains in the HiBMS FOV for the entire burn and for several seconds after flame extinction. The droplet does not distort or disrupt.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.21/0.79 O2/N2, 0.70 atm ambient environment. The droplet remains in the HiBMS FOV for the entire burn and for several seconds after flame extinction. The droplet does not distort or disrupt.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-036_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.21/0.79 O2/N2, 0.70 atm ambient environment. The droplet remains in the HiBMS FOV for the entire burn and for several seconds after flame extinction. The droplet does not distort or disrupt.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-036_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.67,
     "max": 1.67,
     "quality": "reported",
     "raw": "1.67",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-036_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-036_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.8608,
     "max": 71.8608,
     "quality": "reported",
     "raw": "539",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.4,
     "max": 2.4,
     "quality": "reported",
     "raw": "2.4",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2009-12-15",
     "quality": "reported",
     "raw": "12/15/09",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/37",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "220R001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 37,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.62,
     "max": 27.62,
     "quality": "reported",
     "raw": "300.77",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-037_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.77",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-037_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 10.7,
     "max": 10.7,
     "quality": "reported",
     "raw": "10.7",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.72,
     "max": 0.72,
     "quality": "reported",
     "raw": "0.72",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet with ~ 3 mm/sec translation burning in a 0.34/0.66 O2/N2, 0.7 atm ambient environment. The droplet remains within the HiBMS FOV for the entire test. After ignition and the start of translation, there is significnat transverse motion. There is a lot of scatter in the droplet history because of the droplet motion on the fiber. The flame view shows a bright flame with A LOT of sparklers throughout the burn. The transverse droplet motion becomes more severe towards the end of the test, with the droplet deforming. Flame extinction is coincident with a complete droplet disruption that tears the droplet off the fiber and extinguishes the flame.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet with ~ 3 mm/sec translation burning in a 0.34/0.66 O2/N2, 0.7 atm ambient environment. The droplet remains within the HiBMS FOV for the entire test. After ignition and the start of translation, there is significnat transverse motion. There is a lot of scatter in the droplet history because of the droplet motion on the fiber. The flame view shows a bright flame with A LOT of sparklers throughout the burn. The transverse droplet motion becomes more severe towards the end of the test, with the droplet deforming. Flame extinction is coincident with a complete droplet disruption that tears the droplet off the fiber and extinguishes the flame.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-037_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet with ~ 3 mm/sec translation burning in a 0.34/0.66 O2/N2, 0.7 atm ambient environment. The droplet remains within the HiBMS FOV for the entire test. After ignition and the start of translation, there is significnat transverse motion. There is a lot of scatter in the droplet history because of the droplet motion on the fiber. The flame view shows a bright flame with A LOT of sparklers throughout the burn. The transverse droplet motion becomes more severe towards the end of the test, with the droplet deforming. Flame extinction is coincident with a complete droplet disruption that tears the droplet off the fiber and extinguishes the flame.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-037_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-037_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-037_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.66,
     "max": 0.66,
     "quality": "reported",
     "raw": "0.66",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.34,
     "max": 0.34,
     "quality": "reported",
     "raw": "0.34",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.2342,
     "max": 71.2342,
     "quality": "reported",
     "raw": "534.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.31,
     "max": 3.31,
     "quality": "reported",
     "raw": "3.31",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-01-07",
     "quality": "reported",
     "raw": "1/7/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/38",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "220R002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 38,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.38,
     "max": 27.38,
     "quality": "reported",
     "raw": "300.53",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-038_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.53",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-038_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 15.3,
     "max": 15.3,
     "quality": "reported",
     "raw": "15.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.71,
     "max": 0.71,
     "quality": "reported",
     "raw": "0.71",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet with translation burning in a 0.34/0.66 O2/N2, 0.7 atm ambient. The droplet burn is very smooth with little motion of the droplet relative to the fiber for most of the test. About 80% of the way through the burn the droplet begins transverse vibrations on the fiber. The vibrations grow in magnitude until the droplet disrupts and disintegrates, extinguishing the flame and leaving no fuel droplet on the fiber. The LLUV IPSU stopped recording for about 1/2 of the test (in the middle).",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet with translation burning in a 0.34/0.66 O2/N2, 0.7 atm ambient. The droplet burn is very smooth with little motion of the droplet relative to the fiber for most of the test. About 80% of the way through the burn the droplet begins transverse vibrations on the fiber. The vibrations grow in magnitude until the droplet disrupts and disintegrates, extinguishing the flame and leaving no fuel droplet on the fiber. The LLUV IPSU stopped recording for about 1/2 of the test (in the middle).",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-038_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet with translation burning in a 0.34/0.66 O2/N2, 0.7 atm ambient. The droplet burn is very smooth with little motion of the droplet relative to the fiber for most of the test. About 80% of the way through the burn the droplet begins transverse vibrations on the fiber. The vibrations grow in magnitude until the droplet disrupts and disintegrates, extinguishing the flame and leaving no fuel droplet on the fiber. The LLUV IPSU stopped recording for about 1/2 of the test (in the middle).",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-038_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-038_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-038_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.66,
     "max": 0.66,
     "quality": "reported",
     "raw": "0.66",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.34,
     "max": 0.34,
     "quality": "reported",
     "raw": "0.34",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.2475,
     "max": 71.2475,
     "quality": "reported",
     "raw": "534.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.59,
     "max": 3.59,
     "quality": "reported",
     "raw": "3.59",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-01-07",
     "quality": "reported",
     "raw": "1/7/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/39",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "224F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 39,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.79,
     "max": 27.79,
     "quality": "reported",
     "raw": "300.94",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-039_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.94",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-039_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 9.9,
     "max": 9.9,
     "quality": "reported",
     "raw": "9.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.34/0.66 O2/N2, 0.70 atm ambient environment. There is significant transverse and axial oscillations on the fiber during the entire burn although the droplet remains within the HiBMS FOV for the entire test. There is significant sooting with large aggregates throughout the entire test. The sooting is high enough that the threshold intensity for droplet discrimination had to be reduced to get reasonable droplet size measurements. The flame is bright yellow and very luminous the entire test. There is a disruption that dislocates the droplet from fiber that is coincident with flame extinction.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.34/0.66 O2/N2, 0.70 atm ambient environment. There is significant transverse and axial oscillations on the fiber during the entire burn although the droplet remains within the HiBMS FOV for the entire test. There is significant sooting with large aggregates throughout the entire test. The sooting is high enough that the threshold intensity for droplet discrimination had to be reduced to get reasonable droplet size measurements. The flame is bright yellow and very luminous the entire test. There is a disruption that dislocates the droplet from fiber that is coincident with flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-039_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.34/0.66 O2/N2, 0.70 atm ambient environment. There is significant transverse and axial oscillations on the fiber during the entire burn although the droplet remains within the HiBMS FOV for the entire test. There is significant sooting with large aggregates throughout the entire test. The sooting is high enough that the threshold intensity for droplet discrimination had to be reduced to get reasonable droplet size measurements. The flame is bright yellow and very luminous the entire test. There is a disruption that dislocates the droplet from fiber that is coincident with flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-039_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-039_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-039_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.66,
     "max": 0.66,
     "quality": "reported",
     "raw": "0.66",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.34,
     "max": 0.34,
     "quality": "reported",
     "raw": "0.34",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.3142,
     "max": 71.3142,
     "quality": "reported",
     "raw": "534.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.91,
     "max": 2.91,
     "quality": "reported",
     "raw": "2.91",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-01-07",
     "quality": "reported",
     "raw": "1/7/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/40",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "219R001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 40,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.37,
     "max": 27.37,
     "quality": "reported",
     "raw": "300.52",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-040_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.52",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-040_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 19.2,
     "max": 19.2,
     "quality": "reported",
     "raw": "19.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.62,
     "max": 0.62,
     "quality": "reported",
     "raw": "0.62",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a0.30/0.70 O2/N2, 0.7 atm ambient environment. The droplet has some transverse oscillations after ignition. The transverse oscillations diminish relatively quickly. During and after translation the droplet oscillates axially. It moves into and partially out of the HiBMS FOV (to the E). The droplet stops moving both transversely and axially and burns smoothly eventually shrinking until it is fully in the HiBMS FOV. Near the end of the test the droplet begins to oscillate on the fiber and disrupts, dislodging from the fiber and causing flame extinction.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a0.30/0.70 O2/N2, 0.7 atm ambient environment. The droplet has some transverse oscillations after ignition. The transverse oscillations diminish relatively quickly. During and after translation the droplet oscillates axially. It moves into and partially out of the HiBMS FOV (to the E). The droplet stops moving both transversely and axially and burns smoothly eventually shrinking until it is fully in the HiBMS FOV. Near the end of the test the droplet begins to oscillate on the fiber and disrupts, dislodging from the fiber and causing flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-040_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a0.30/0.70 O2/N2, 0.7 atm ambient environment. The droplet has some transverse oscillations after ignition. The transverse oscillations diminish relatively quickly. During and after translation the droplet oscillates axially. It moves into and partially out of the HiBMS FOV (to the E). The droplet stops moving both transversely and axially and burns smoothly eventually shrinking until it is fully in the HiBMS FOV. Near the end of the test the droplet begins to oscillate on the fiber and disrupts, dislodging from the fiber and causing flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-040_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-040_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-040_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.3408,
     "max": 71.3408,
     "quality": "reported",
     "raw": "535.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.77,
     "max": 3.77,
     "quality": "reported",
     "raw": "3.77",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-01-08",
     "quality": "reported",
     "raw": "1/8/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/41",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "219F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 41,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.32,
     "max": 27.32,
     "quality": "reported",
     "raw": "300.47",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-041_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.47",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-041_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 14.1,
     "max": 14.1,
     "quality": "reported",
     "raw": "14.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.65,
     "max": 0.65,
     "quality": "reported",
     "raw": "0.65",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.30/0.70 O2/N2, 0.7 atm ambient environment. The droplet exhibits significant axial oscillations during and after the start and stop of fiber translation. The droplet drifts in and partially out of the HiBMS FOV. At the end of the test, the droplet swells, disrupts and becomes dislodged from the fiber. The disruption is coincident with flame extinction (the dislodged droplet does burn as it drifts away). The color camera IPSU did not record any images after deployment.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.30/0.70 O2/N2, 0.7 atm ambient environment. The droplet exhibits significant axial oscillations during and after the start and stop of fiber translation. The droplet drifts in and partially out of the HiBMS FOV. At the end of the test, the droplet swells, disrupts and becomes dislodged from the fiber. The disruption is coincident with flame extinction (the dislodged droplet does burn as it drifts away). The color camera IPSU did not record any images after deployment.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-041_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.30/0.70 O2/N2, 0.7 atm ambient environment. The droplet exhibits significant axial oscillations during and after the start and stop of fiber translation. The droplet drifts in and partially out of the HiBMS FOV. At the end of the test, the droplet swells, disrupts and becomes dislodged from the fiber. The disruption is coincident with flame extinction (the dislodged droplet does burn as it drifts away). The color camera IPSU did not record any images after deployment.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-041_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-041_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-041_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.2342,
     "max": 71.2342,
     "quality": "reported",
     "raw": "534.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.35,
     "max": 3.35,
     "quality": "reported",
     "raw": "3.35",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-01-08",
     "quality": "reported",
     "raw": "1/8/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/42",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "223F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 42,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.58,
     "max": 27.58,
     "quality": "reported",
     "raw": "300.73",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-042_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.73",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-042_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 11.3,
     "max": 11.3,
     "quality": "reported",
     "raw": "11.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.58,
     "max": 0.58,
     "quality": "reported",
     "raw": "0.58",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet burning in a 0.30/0.70 O2/N2, 0.70 atm ambient environment. The droplet is relatively heavily sooting immediately after ignition. Shortly after ignition the droplet begins to severely distort, periodically expelling small droplets of fuel that continue to burn. There is a large disruption that completely dislodges the droplet from the fiber. This droplet drifts N in the HiBMS FOV, then S (after another disruption) and then burns relatively cleanly to disruption at a small size. The burning rate constant is that during the relatively clean period after the droplet gets dislodged from the fiber. The color camera IPSU did not record any images after deployment.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet burning in a 0.30/0.70 O2/N2, 0.70 atm ambient environment. The droplet is relatively heavily sooting immediately after ignition. Shortly after ignition the droplet begins to severely distort, periodically expelling small droplets of fuel that continue to burn. There is a large disruption that completely dislodges the droplet from the fiber. This droplet drifts N in the HiBMS FOV, then S (after another disruption) and then burns relatively cleanly to disruption at a small size. The burning rate constant is that during the relatively clean period after the droplet gets dislodged from the fiber. The color camera IPSU did not record any images after deployment.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-042_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet burning in a 0.30/0.70 O2/N2, 0.70 atm ambient environment. The droplet is relatively heavily sooting immediately after ignition. Shortly after ignition the droplet begins to severely distort, periodically expelling small droplets of fuel that continue to burn. There is a large disruption that completely dislodges the droplet from the fiber. This droplet drifts N in the HiBMS FOV, then S (after another disruption) and then burns relatively cleanly to disruption at a small size. The burning rate constant is that during the relatively clean period after the droplet gets dislodged from the fiber. The color camera IPSU did not record any images after deployment.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-042_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-042_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-042_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.3275,
     "max": 71.3275,
     "quality": "reported",
     "raw": "535",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.92,
     "max": 2.92,
     "quality": "reported",
     "raw": "2.92",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-01-08",
     "quality": "reported",
     "raw": "1/8/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/43",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "223F002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 43,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.16,
     "max": 27.16,
     "quality": "reported",
     "raw": "300.31",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-043_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.31",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-043_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 11.4,
     "max": 11.4,
     "quality": "reported",
     "raw": "11.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.78,
     "max": 0.78,
     "quality": "reported",
     "raw": "0.78",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.30/0.70 O2/N2, 0.7 atm ambient environment. There is significant sooting. The droplet remains in the HiBMS FOV the entire test until the droplet disrupts and dislodges from the fiber. There is significant oscillatory axial motion on the fiber during the entire test.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.30/0.70 O2/N2, 0.7 atm ambient environment. There is significant sooting. The droplet remains in the HiBMS FOV the entire test until the droplet disrupts and dislodges from the fiber. There is significant oscillatory axial motion on the fiber during the entire test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-043_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.30/0.70 O2/N2, 0.7 atm ambient environment. There is significant sooting. The droplet remains in the HiBMS FOV the entire test until the droplet disrupts and dislodges from the fiber. There is significant oscillatory axial motion on the fiber during the entire test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-043_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-043_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-043_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.3142,
     "max": 71.3142,
     "quality": "reported",
     "raw": "534.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.97,
     "max": 2.97,
     "quality": "reported",
     "raw": "2.97",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-01-08",
     "quality": "reported",
     "raw": "1/8/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/44",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "206F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 44,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.52,
     "max": 25.52,
     "quality": "reported",
     "raw": "298.67",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-044_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.67",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-044_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 16.6,
     "max": 16.6,
     "quality": "reported",
     "raw": "16.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.63,
     "max": 0.63,
     "quality": "reported",
     "raw": "0.63",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.30/0.70 O2/N2, 1.0 atm ambient environment. There is some transverse motion after deployment that persists throughout the test. There is also significant oscillatory axial motion during the translation that persists after the fiber stops translating. The droplet drifts axially out of the HiBMS FOV about 1/3rd of the way through the burn. There is significant 'sparkling' evident in the color camera view. It is not visible in either the HiBMS or LLUV. The droplet disrupts and becomes dislodged from the fiber coincident with flame extinction.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.30/0.70 O2/N2, 1.0 atm ambient environment. There is some transverse motion after deployment that persists throughout the test. There is also significant oscillatory axial motion during the translation that persists after the fiber stops translating. The droplet drifts axially out of the HiBMS FOV about 1/3rd of the way through the burn. There is significant 'sparkling' evident in the color camera view. It is not visible in either the HiBMS or LLUV. The droplet disrupts and becomes dislodged from the fiber coincident with flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-044_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.30/0.70 O2/N2, 1.0 atm ambient environment. There is some transverse motion after deployment that persists throughout the test. There is also significant oscillatory axial motion during the translation that persists after the fiber stops translating. The droplet drifts axially out of the HiBMS FOV about 1/3rd of the way through the burn. There is significant 'sparkling' evident in the color camera view. It is not visible in either the HiBMS or LLUV. The droplet disrupts and becomes dislodged from the fiber coincident with flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-044_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-044_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-044_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.232,
     "max": 102.232,
     "quality": "reported",
     "raw": "766.8",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.49,
     "max": 3.49,
     "quality": "reported",
     "raw": "3.49",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-01-11",
     "quality": "reported",
     "raw": "1/11/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/45",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "206R001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 45,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.74,
     "max": 25.74,
     "quality": "reported",
     "raw": "298.89",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-045_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.89",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-045_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 6.6,
     "max": 6.6,
     "quality": "reported",
     "raw": "6.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.73,
     "max": 0.73,
     "quality": "reported",
     "raw": "0.73",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.30/0.70 O2/N2, 1.0 atm ambient environment. The droplet remains in the HiBMS FOV for the entire test. There is some axial and transverse droplet motion from deployment until the end of the test. The color camera IPSU did not record any images after deployment. The extinction droplet diameter is the droplet diameter when the droplet disrupts and becomes dislodged from the fiber. The disruption is coincident with flame extinction. There is some droplet swelling or shape change before disruption.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.30/0.70 O2/N2, 1.0 atm ambient environment. The droplet remains in the HiBMS FOV for the entire test. There is some axial and transverse droplet motion from deployment until the end of the test. The color camera IPSU did not record any images after deployment. The extinction droplet diameter is the droplet diameter when the droplet disrupts and becomes dislodged from the fiber. The disruption is coincident with flame extinction. There is some droplet swelling or shape change before disruption.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-045_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.30/0.70 O2/N2, 1.0 atm ambient environment. The droplet remains in the HiBMS FOV for the entire test. There is some axial and transverse droplet motion from deployment until the end of the test. The color camera IPSU did not record any images after deployment. The extinction droplet diameter is the droplet diameter when the droplet disrupts and becomes dislodged from the fiber. The disruption is coincident with flame extinction. There is some droplet swelling or shape change before disruption.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-045_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.01,
     "max": 1.01,
     "quality": "reported",
     "raw": "1.01",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-045_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-045_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.432,
     "max": 102.432,
     "quality": "reported",
     "raw": "768.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.42,
     "max": 2.42,
     "quality": "reported",
     "raw": "2.42",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-01-11",
     "quality": "reported",
     "raw": "1/11/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/46",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "205R001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 46,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.04,
     "max": 27.04,
     "quality": "reported",
     "raw": "300.19",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-046_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.19",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-046_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 13.1,
     "max": 13.1,
     "quality": "reported",
     "raw": "13.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.54,
     "max": 0.54,
     "quality": "reported",
     "raw": "0.54",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet burning in a nominally air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet remains in the HiBMS FOV for the entire test. There is significant oscillatory axial motion during the most of the test. At the very end, the droplet does become stationary. There is some deformation/growth/shape change at the end of the test. There is a small disruption that is coincident with flame extinction.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet burning in a nominally air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet remains in the HiBMS FOV for the entire test. There is significant oscillatory axial motion during the most of the test. At the very end, the droplet does become stationary. There is some deformation/growth/shape change at the end of the test. There is a small disruption that is coincident with flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-046_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet burning in a nominally air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet remains in the HiBMS FOV for the entire test. There is significant oscillatory axial motion during the most of the test. At the very end, the droplet does become stationary. There is some deformation/growth/shape change at the end of the test. There is a small disruption that is coincident with flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-046_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.08,
     "max": 1.08,
     "quality": "reported",
     "raw": "1.08",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-046_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-046_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.592,
     "max": 102.592,
     "quality": "reported",
     "raw": "769.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.78,
     "max": 2.78,
     "quality": "reported",
     "raw": "2.78",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-01-12",
     "quality": "reported",
     "raw": "1/12/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/47",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "209F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 47,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.25,
     "max": 27.25,
     "quality": "reported",
     "raw": "300.40",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-047_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.40",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-047_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 17.1,
     "max": 17.1,
     "quality": "reported",
     "raw": "17.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a nominally air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet drifts E out of the HiBMS FOV about 1/2 the way through the test. The flame oscillates for several seconds before leaving the FOV of all the cameras. It leaves the LLUV FOV last, and is oscillating as it translates S out of the FOV. The radiometer shows flame persists even after leaving the FOV. Extrapolating the burning history to when the radiometer indicates extinction (with large error bars) shows that the droplet burns nearly to extinction. There is no evidence of disruptive burning in any of the camera views. The color camera did not zoom out so it did not capture the flame history correctly.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a nominally air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet drifts E out of the HiBMS FOV about 1/2 the way through the test. The flame oscillates for several seconds before leaving the FOV of all the cameras. It leaves the LLUV FOV last, and is oscillating as it translates S out of the FOV. The radiometer shows flame persists even after leaving the FOV. Extrapolating the burning history to when the radiometer indicates extinction (with large error bars) shows that the droplet burns nearly to extinction. There is no evidence of disruptive burning in any of the camera views. The color camera did not zoom out so it did not capture the flame history correctly.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-047_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a nominally air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet drifts E out of the HiBMS FOV about 1/2 the way through the test. The flame oscillates for several seconds before leaving the FOV of all the cameras. It leaves the LLUV FOV last, and is oscillating as it translates S out of the FOV. The radiometer shows flame persists even after leaving the FOV. Extrapolating the burning history to when the radiometer indicates extinction (with large error bars) shows that the droplet burns nearly to extinction. There is no evidence of disruptive burning in any of the camera views. The color camera did not zoom out so it did not capture the flame history correctly.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-047_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-047_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-047_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.672,
     "max": 102.672,
     "quality": "reported",
     "raw": "770.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.36,
     "max": 3.36,
     "quality": "reported",
     "raw": "3.36",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-01-12",
     "quality": "reported",
     "raw": "1/12/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/48",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "205F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 48,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.67,
     "max": 26.67,
     "quality": "reported",
     "raw": "299.82",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-048_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.82",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-048_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 23.5,
     "max": 23.5,
     "quality": "reported",
     "raw": "23.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.27,
     "max": 0.27,
     "quality": "reported",
     "raw": "0.27",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a nominally air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet drifts E after the start of translation and out of the HiBMS FOV about 1/5th of the way through the test. The flame remains with the LLUV and color camera FOVs for the entire test. There is disruptive burning at the end of the test.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a nominally air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet drifts E after the start of translation and out of the HiBMS FOV about 1/5th of the way through the test. The flame remains with the LLUV and color camera FOVs for the entire test. There is disruptive burning at the end of the test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-048_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a nominally air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet drifts E after the start of translation and out of the HiBMS FOV about 1/5th of the way through the test. The flame remains with the LLUV and color camera FOVs for the entire test. There is disruptive burning at the end of the test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-048_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-048_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-048_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.485,
     "max": 102.485,
     "quality": "reported",
     "raw": "768.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.66,
     "max": 3.66,
     "quality": "reported",
     "raw": "3.66",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-01-12",
     "quality": "reported",
     "raw": "1/12/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/49",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "209F003",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 49,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.33,
     "max": 25.33,
     "quality": "reported",
     "raw": "298.48",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-049_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.48",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-049_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8.6,
     "max": 8.6,
     "quality": "reported",
     "raw": "8.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet with 3 mm/sec translation in a nominally air (0.21/0.79 O2/N2), 1 atm ambient. The HiBMS IPSU stopped recording for a few seconds which resulted in a gap in the droplet history. The droplet oscillates on the fiber throughout the test, with the amplitude and frequency changing. There is also some unusual gas-phase recirculation evident from soot particle motion. The droplet vaporizes vigorously after visible flame extinction. There is also a large vapor cloud formed near the end of the recording period. This is evidence of cool flame burning and extinction following visible flame extinction.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet with 3 mm/sec translation in a nominally air (0.21/0.79 O2/N2), 1 atm ambient. The HiBMS IPSU stopped recording for a few seconds which resulted in a gap in the droplet history. The droplet oscillates on the fiber throughout the test, with the amplitude and frequency changing. There is also some unusual gas-phase recirculation evident from soot particle motion. The droplet vaporizes vigorously after visible flame extinction. There is also a large vapor cloud formed near the end of the recording period. This is evidence of cool flame burning and extinction following visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-049_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet with 3 mm/sec translation in a nominally air (0.21/0.79 O2/N2), 1 atm ambient. The HiBMS IPSU stopped recording for a few seconds which resulted in a gap in the droplet history. The droplet oscillates on the fiber throughout the test, with the amplitude and frequency changing. There is also some unusual gas-phase recirculation evident from soot particle motion. The droplet vaporizes vigorously after visible flame extinction. There is also a large vapor cloud formed near the end of the recording period. This is evidence of cool flame burning and extinction following visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-049_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.78,
     "max": 2.78,
     "quality": "reported",
     "raw": "2.78",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-049_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-049_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.978,
     "max": 101.978,
     "quality": "reported",
     "raw": "764.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.46,
     "max": 3.46,
     "quality": "reported",
     "raw": "3.46",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-01-19",
     "quality": "reported",
     "raw": "1/19/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/50",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "209F004",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 50,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.19,
     "max": 27.19,
     "quality": "reported",
     "raw": "300.34",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-050_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.34",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-050_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8.4,
     "max": 8.4,
     "quality": "reported",
     "raw": "8.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet with 3 mm/sec translation in a nominally air (0.21/0.79 O2/N2), 1 atm ambient. There are moderate transverse oscillations on the fiber throughout the test. There is unique circulation patterns in the gas phase evident from the soot motion. The droplet continues to vaporize linearly after visible flame extinction and there is a large vapor cloud formed nearly coincident with a plateau in the droplet history. This is evidence of cool flame burning and extinction following visible flame extinction.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet with 3 mm/sec translation in a nominally air (0.21/0.79 O2/N2), 1 atm ambient. There are moderate transverse oscillations on the fiber throughout the test. There is unique circulation patterns in the gas phase evident from the soot motion. The droplet continues to vaporize linearly after visible flame extinction and there is a large vapor cloud formed nearly coincident with a plateau in the droplet history. This is evidence of cool flame burning and extinction following visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-050_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet with 3 mm/sec translation in a nominally air (0.21/0.79 O2/N2), 1 atm ambient. There are moderate transverse oscillations on the fiber throughout the test. There is unique circulation patterns in the gas phase evident from the soot motion. The droplet continues to vaporize linearly after visible flame extinction and there is a large vapor cloud formed nearly coincident with a plateau in the droplet history. This is evidence of cool flame burning and extinction following visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-050_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.98,
     "max": 2.98,
     "quality": "reported",
     "raw": "2.98",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-050_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-050_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.672,
     "max": 102.672,
     "quality": "reported",
     "raw": "770.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.57,
     "max": 3.57,
     "quality": "reported",
     "raw": "3.57",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-01-19",
     "quality": "reported",
     "raw": "1/19/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/51",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "209F005",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 51,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.6,
     "max": 27.6,
     "quality": "reported",
     "raw": "300.75",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-051_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.75",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-051_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8.2,
     "max": 8.2,
     "quality": "reported",
     "raw": "8.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.65,
     "max": 0.65,
     "quality": "reported",
     "raw": "0.65",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet burning in a nominally air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet remains in the HiBMS FOV the entire test and burns to completion. There is a very luminous flame initially and that abruptly disappears half way through the burn. There are significant transverse oscillations of the droplet on the fiber although it never becomes dislodged from the fiber.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet burning in a nominally air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet remains in the HiBMS FOV the entire test and burns to completion. There is a very luminous flame initially and that abruptly disappears half way through the burn. There are significant transverse oscillations of the droplet on the fiber although it never becomes dislodged from the fiber.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-051_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet burning in a nominally air (0.21/0.79 O2/N2), 1.0 atm ambient environment. The droplet remains in the HiBMS FOV the entire test and burns to completion. There is a very luminous flame initially and that abruptly disappears half way through the burn. There are significant transverse oscillations of the droplet on the fiber although it never becomes dislodged from the fiber.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-051_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-051_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-051_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.845,
     "max": 102.845,
     "quality": "reported",
     "raw": "771.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.41,
     "max": 2.41,
     "quality": "reported",
     "raw": "2.41",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-01-19",
     "quality": "reported",
     "raw": "1/19/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/52",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "210F002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 52,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.73,
     "max": 26.73,
     "quality": "reported",
     "raw": "299.88",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-052_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.88",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-052_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 18.3,
     "max": 18.3,
     "quality": "reported",
     "raw": "18.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.30/0.70 O2/N2, 1.0 atm ambient environment. There are significant oscillations on the fiber throughout the burn. There is also significant sooting with large agglomerated stuck to the fiber (which creates scatter in the droplet history). The droplet drifts partially out of the HiBMS FOV for a short time before moving back in. There are significant oscillations, shape changes abd ejection of material from the droplet late in the test that ends with a disruption.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.30/0.70 O2/N2, 1.0 atm ambient environment. There are significant oscillations on the fiber throughout the burn. There is also significant sooting with large agglomerated stuck to the fiber (which creates scatter in the droplet history). The droplet drifts partially out of the HiBMS FOV for a short time before moving back in. There are significant oscillations, shape changes abd ejection of material from the droplet late in the test that ends with a disruption.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-052_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.30/0.70 O2/N2, 1.0 atm ambient environment. There are significant oscillations on the fiber throughout the burn. There is also significant sooting with large agglomerated stuck to the fiber (which creates scatter in the droplet history). The droplet drifts partially out of the HiBMS FOV for a short time before moving back in. There are significant oscillations, shape changes abd ejection of material from the droplet late in the test that ends with a disruption.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-052_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-052_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-052_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.805,
     "max": 102.805,
     "quality": "reported",
     "raw": "771.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.53,
     "max": 3.53,
     "quality": "reported",
     "raw": "3.53",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-01-11",
     "quality": "reported",
     "raw": "1/11/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/53",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "209F002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 53,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.36,
     "max": 27.36,
     "quality": "reported",
     "raw": "300.51",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-053_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.51",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-053_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 18.5,
     "max": 18.5,
     "quality": "reported",
     "raw": "18.5",
     "column": "Burn time; s"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet burning in a 0.21/0.79 O2/N2, 1.0 atm ambient environment. There was no HiBMS data for this test. There was poor alignment between the needle and the droplet and the droplet did not get deployed on the fiber. It drifted N in the color camera FOV after deployment and ignition and out of the FOV before the end of the test. The droplet stayed in the LLUV FOV the entire test. The discrepancy in the flame size between the LLUV and color camera is because the flame is much brighter at the leading edge than the trailing edge and that results in a some of the flame being cropped from the color camera images during analysis.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet burning in a 0.21/0.79 O2/N2, 1.0 atm ambient environment. There was no HiBMS data for this test. There was poor alignment between the needle and the droplet and the droplet did not get deployed on the fiber. It drifted N in the color camera FOV after deployment and ignition and out of the FOV before the end of the test. The droplet stayed in the LLUV FOV the entire test. The discrepancy in the flame size between the LLUV and color camera is because the flame is much brighter at the leading edge than the trailing edge and that results in a some of the flame being cropped from the color camera images during analysis.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-053_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet burning in a 0.21/0.79 O2/N2, 1.0 atm ambient environment. There was no HiBMS data for this test. There was poor alignment between the needle and the droplet and the droplet did not get deployed on the fiber. It drifted N in the color camera FOV after deployment and ignition and out of the FOV before the end of the test. The droplet stayed in the LLUV FOV the entire test. The discrepancy in the flame size between the LLUV and color camera is because the flame is much brighter at the leading edge than the trailing edge and that results in a some of the flame being cropped from the color camera images during analysis.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-053_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-053_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-053_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.685,
     "max": 102.685,
     "quality": "reported",
     "raw": "770.2",
     "column": "Ambient pressure; mmHg"
    },
    "test_date": {
     "text": "2010-01-12",
     "quality": "reported",
     "raw": "1/12/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/54",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "190F003",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 54,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.82,
     "max": 26.82,
     "quality": "reported",
     "raw": "299.97",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-054_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.97",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-054_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 29,
     "max": 29,
     "quality": "reported",
     "raw": "29",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.41,
     "max": 0.41,
     "quality": "reported",
     "raw": "0.41",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-flaoating methanol droplet burning in a 0.20/0.80 O2/N2 , 0.7 atm ambient environment. The droplet has almost no residual motion after ignition. About 1/2 way though the test, the droplet begins to abruptly move NEE and then quickly changes direction to NE. The droplet leaves the HiBMS FOV after the second change in direction. It appears from the color camera that there may be some small gas bubbles in the droplet. There is also some distortion in the droplet history right before the droplet changes direction. This could be due to the expanding gas bubbles distorting the droplet, then bursting and imparting a momentum to the droplet. The burning rate constant and flame standoff data are for the portion of the test before the disruption and change in direction. There is no extinction droplet diameter listed because of the limited time the droplet is in the HiBMS FOV and the disruptions in the droplet during the burn.",
     "quality": "reported",
     "raw": "Free-flaoating methanol droplet burning in a 0.20/0.80 O2/N2 , 0.7 atm ambient environment. The droplet has almost no residual motion after ignition. About 1/2 way though the test, the droplet begins to abruptly move NEE and then quickly changes direction to NE. The droplet leaves the HiBMS FOV after the second change in direction. It appears from the color camera that there may be some small gas bubbles in the droplet. There is also some distortion in the droplet history right before the droplet changes direction. This could be due to the expanding gas bubbles distorting the droplet, then bursting and imparting a momentum to the droplet. The burning rate constant and flame standoff data are for the portion of the test before the disruption and change in direction. There is no extinction droplet diameter listed because of the limited time the droplet is in the HiBMS FOV and the disruptions in the droplet during the burn.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-054_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-flaoating methanol droplet burning in a 0.20/0.80 O2/N2 , 0.7 atm ambient environment. The droplet has almost no residual motion after ignition. About 1/2 way though the test, the droplet begins to abruptly move NEE and then quickly changes direction to NE. The droplet leaves the HiBMS FOV after the second change in direction. It appears from the color camera that there may be some small gas bubbles in the droplet. There is also some distortion in the droplet history right before the droplet changes direction. This could be due to the expanding gas bubbles distorting the droplet, then bursting and imparting a momentum to the droplet. The burning rate constant and flame standoff data are for the portion of the test before the disruption and change in direction. There is no extinction droplet diameter listed because of the limited time the droplet is in the HiBMS FOV and the disruptions in the droplet during the burn.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-054_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-054_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-054_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 72.1807,
     "max": 72.1807,
     "quality": "reported",
     "raw": "541.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.56,
     "max": 3.56,
     "quality": "reported",
     "raw": "3.56",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-01-29",
     "quality": "reported",
     "raw": "1/29/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/55",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "218F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 55,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.99,
     "max": 26.99,
     "quality": "reported",
     "raw": "300.14",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-055_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.14",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-055_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 20.5,
     "max": 20.5,
     "quality": "reported",
     "raw": "20.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.46,
     "max": 0.46,
     "quality": "reported",
     "raw": "0.46",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.20/0.80 O2/N2, 0.7 atm ambient. The droplet remains in the HiBMS FOV for the entire test. After the start of translation, the droplet oscillates rapidly between where the flame impinges on the fiber. The oscillation stops at approximately halfway through the test. The periodic noise in the droplet history is caused by the oscillation. The droplet then grows and has a small disruption leaving a small residual droplet on the fiber. The burst or disruption is coincident with flame extinction.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.20/0.80 O2/N2, 0.7 atm ambient. The droplet remains in the HiBMS FOV for the entire test. After the start of translation, the droplet oscillates rapidly between where the flame impinges on the fiber. The oscillation stops at approximately halfway through the test. The periodic noise in the droplet history is caused by the oscillation. The droplet then grows and has a small disruption leaving a small residual droplet on the fiber. The burst or disruption is coincident with flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-055_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.20/0.80 O2/N2, 0.7 atm ambient. The droplet remains in the HiBMS FOV for the entire test. After the start of translation, the droplet oscillates rapidly between where the flame impinges on the fiber. The oscillation stops at approximately halfway through the test. The periodic noise in the droplet history is caused by the oscillation. The droplet then grows and has a small disruption leaving a small residual droplet on the fiber. The burst or disruption is coincident with flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-055_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.39,
     "max": 2.39,
     "quality": "reported",
     "raw": "2.39",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-055_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-055_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.8,
     "max": 0.8,
     "quality": "reported",
     "raw": "0.8",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 72.3407,
     "max": 72.3407,
     "quality": "reported",
     "raw": "542.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.37,
     "max": 3.37,
     "quality": "reported",
     "raw": "3.37",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-01-29",
     "quality": "reported",
     "raw": "1/29/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/56",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "194F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 56,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.82,
     "max": 27.82,
     "quality": "reported",
     "raw": "300.97",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-056_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.97",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-056_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 7.9,
     "max": 7.9,
     "quality": "reported",
     "raw": "7.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.44,
     "max": 0.44,
     "quality": "reported",
     "raw": "0.44",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.20/0.80 O2/N2, 0.70 atm ambient environment. The droplet drifts E after ignition and leaves the HiBMS FOV shortly after visible flame extinction. The droplet the re-enters the HiBMS FOV from the E a few seconds prior to the stop of video recording. There is vapor cloud formation in the color camera view approximately 20 sec after visible flame extinction. It is not clear whether cool flame burning and extinction occurred for this test.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.20/0.80 O2/N2, 0.70 atm ambient environment. The droplet drifts E after ignition and leaves the HiBMS FOV shortly after visible flame extinction. The droplet the re-enters the HiBMS FOV from the E a few seconds prior to the stop of video recording. There is vapor cloud formation in the color camera view approximately 20 sec after visible flame extinction. It is not clear whether cool flame burning and extinction occurred for this test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-056_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.20/0.80 O2/N2, 0.70 atm ambient environment. The droplet drifts E after ignition and leaves the HiBMS FOV shortly after visible flame extinction. The droplet the re-enters the HiBMS FOV from the E a few seconds prior to the stop of video recording. There is vapor cloud formation in the color camera view approximately 20 sec after visible flame extinction. It is not clear whether cool flame burning and extinction occurred for this test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-056_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.04,
     "max": 3.04,
     "quality": "reported",
     "raw": "3.04",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-056_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-056_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 72.5407,
     "max": 72.5407,
     "quality": "reported",
     "raw": "544.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.56,
     "max": 3.56,
     "quality": "reported",
     "raw": "3.56",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-01-29",
     "quality": "reported",
     "raw": "1/29/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/57",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "303F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 57,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.92,
     "max": 27.92,
     "quality": "reported",
     "raw": "301.07",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-057_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 301.07",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-057_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 6.8,
     "max": 6.8,
     "quality": "reported",
     "raw": "6.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.54,
     "max": 0.54,
     "quality": "reported",
     "raw": "0.54",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.20/0.80 O2/N2, 0.70 atm ambient environment. There is moderate transverse and axial oscillations on the fiber after deployment and during the entire visible flame and after visible flame extinction. The flame extinguishes after the translation stops, with the trailing edge of the flame visibly weaker and extinguishing first. There are unusual, recirculating flow patterns in the HiBMS fuel from soot that moves toward the droplet, accelerates circuferentially a short arc and then goes radially towards the flame and back again. There is a small vapor cloud formed in the color camera view approximately 20 sec after visible flame extinction. It is not clear if cool flame burning and extinction was present in this test.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.20/0.80 O2/N2, 0.70 atm ambient environment. There is moderate transverse and axial oscillations on the fiber after deployment and during the entire visible flame and after visible flame extinction. The flame extinguishes after the translation stops, with the trailing edge of the flame visibly weaker and extinguishing first. There are unusual, recirculating flow patterns in the HiBMS fuel from soot that moves toward the droplet, accelerates circuferentially a short arc and then goes radially towards the flame and back again. There is a small vapor cloud formed in the color camera view approximately 20 sec after visible flame extinction. It is not clear if cool flame burning and extinction was present in this test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-057_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.20/0.80 O2/N2, 0.70 atm ambient environment. There is moderate transverse and axial oscillations on the fiber after deployment and during the entire visible flame and after visible flame extinction. The flame extinguishes after the translation stops, with the trailing edge of the flame visibly weaker and extinguishing first. There are unusual, recirculating flow patterns in the HiBMS fuel from soot that moves toward the droplet, accelerates circuferentially a short arc and then goes radially towards the flame and back again. There is a small vapor cloud formed in the color camera view approximately 20 sec after visible flame extinction. It is not clear if cool flame burning and extinction was present in this test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-057_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.49,
     "max": 2.49,
     "quality": "reported",
     "raw": "2.49",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-057_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-057_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 72.5807,
     "max": 72.5807,
     "quality": "reported",
     "raw": "544.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.1,
     "max": 3.1,
     "quality": "reported",
     "raw": "3.1",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-01-29",
     "quality": "reported",
     "raw": "1/29/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/58",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "176F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 58,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.39,
     "max": 27.39,
     "quality": "reported",
     "raw": "300.54",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-058_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.54",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-058_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 29.1,
     "max": 29.1,
     "quality": "reported",
     "raw": "29.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.42,
     "max": 0.42,
     "quality": "reported",
     "raw": "0.42",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.18/0.82 O2/N2 ambient, 1.0 atm ambient. The droplet slowly drifts E out of the HiBMS FOV accelerating slowly before leaving the FOV. The droplet remains in the LLUV and color camera FOVs for the entire test. There is no disruption. There is no extinction droplet diameter listed because the droplet is not in the HiBMS FOV for the majority of the burning history.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.18/0.82 O2/N2 ambient, 1.0 atm ambient. The droplet slowly drifts E out of the HiBMS FOV accelerating slowly before leaving the FOV. The droplet remains in the LLUV and color camera FOVs for the entire test. There is no disruption. There is no extinction droplet diameter listed because the droplet is not in the HiBMS FOV for the majority of the burning history.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-058_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.18/0.82 O2/N2 ambient, 1.0 atm ambient. The droplet slowly drifts E out of the HiBMS FOV accelerating slowly before leaving the FOV. The droplet remains in the LLUV and color camera FOVs for the entire test. There is no disruption. There is no extinction droplet diameter listed because the droplet is not in the HiBMS FOV for the majority of the burning history.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-058_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-058_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-058_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.82,
     "max": 0.82,
     "quality": "reported",
     "raw": "0.82",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 103.098,
     "max": 103.098,
     "quality": "reported",
     "raw": "773.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.69,
     "max": 3.69,
     "quality": "reported",
     "raw": "3.69",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-02-04",
     "quality": "reported",
     "raw": "2/4/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/59",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "176R001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 59,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.57,
     "max": 26.57,
     "quality": "reported",
     "raw": "299.72",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-059_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.72",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-059_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 17.7,
     "max": 17.7,
     "quality": "reported",
     "raw": "17.7",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.43,
     "max": 0.43,
     "quality": "reported",
     "raw": "0.43",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.18/0.82 O2/N2, 1.0 atm ambient environment. The droplet remains in the HiBMS FOV the entire test, drifting N after deployment, stopping, drifting SW to the corner of the FOV and then N to the middle W of the FOV. The color camera IPSU did not record any images for this test.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.18/0.82 O2/N2, 1.0 atm ambient environment. The droplet remains in the HiBMS FOV the entire test, drifting N after deployment, stopping, drifting SW to the corner of the FOV and then N to the middle W of the FOV. The color camera IPSU did not record any images for this test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-059_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.18/0.82 O2/N2, 1.0 atm ambient environment. The droplet remains in the HiBMS FOV the entire test, drifting N after deployment, stopping, drifting SW to the corner of the FOV and then N to the middle W of the FOV. The color camera IPSU did not record any images for this test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-059_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.39,
     "max": 1.39,
     "quality": "reported",
     "raw": "1.39",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-059_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-059_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.82,
     "max": 0.82,
     "quality": "reported",
     "raw": "0.82",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.552,
     "max": 102.552,
     "quality": "reported",
     "raw": "769.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.93,
     "max": 2.93,
     "quality": "reported",
     "raw": "2.93",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-02-04",
     "quality": "reported",
     "raw": "2/4/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/60",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "204F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 60,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.58,
     "max": 27.58,
     "quality": "reported",
     "raw": "300.73",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-060_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.73",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-060_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 23.2,
     "max": 23.2,
     "quality": "reported",
     "raw": "23.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet with 3 mm/s translation burning in a 0.18/0.82 O2/N2, 1.0 atm ambient environment. The droplet moves E in the HiBMS FOV with translation and continues to move E along the fiber and out of the FOV after the translation stops. It also drifts partially out of the LLUV FOV. The droplet then oscillates between the regions of the fiber where the flame impinges on it for several seconds before becoming quiescent and burning until, presumabley diffusive, flame extinction. There was no apparent disruption at or near flame extinction.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet with 3 mm/s translation burning in a 0.18/0.82 O2/N2, 1.0 atm ambient environment. The droplet moves E in the HiBMS FOV with translation and continues to move E along the fiber and out of the FOV after the translation stops. It also drifts partially out of the LLUV FOV. The droplet then oscillates between the regions of the fiber where the flame impinges on it for several seconds before becoming quiescent and burning until, presumabley diffusive, flame extinction. There was no apparent disruption at or near flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-060_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet with 3 mm/s translation burning in a 0.18/0.82 O2/N2, 1.0 atm ambient environment. The droplet moves E in the HiBMS FOV with translation and continues to move E along the fiber and out of the FOV after the translation stops. It also drifts partially out of the LLUV FOV. The droplet then oscillates between the regions of the fiber where the flame impinges on it for several seconds before becoming quiescent and burning until, presumabley diffusive, flame extinction. There was no apparent disruption at or near flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-060_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-060_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-060_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.82,
     "max": 0.82,
     "quality": "reported",
     "raw": "0.82",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 103.152,
     "max": 103.152,
     "quality": "reported",
     "raw": "773.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.43,
     "max": 3.43,
     "quality": "reported",
     "raw": "3.43",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-02-04",
     "quality": "reported",
     "raw": "2/4/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/61",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "204R001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 61,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.65,
     "max": 27.65,
     "quality": "reported",
     "raw": "300.80",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-061_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.80",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-061_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 25.7,
     "max": 25.7,
     "quality": "reported",
     "raw": "25.7",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.41,
     "max": 0.41,
     "quality": "reported",
     "raw": "0.41",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet with no translation burning in a 0.18/0.82 O2/N2, 1.0 atm ambient. The droplet remains stationary on the fiber and within the HiBMS FOV for the entire test. The flame is very dim in both the LLUV and color camera views.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet with no translation burning in a 0.18/0.82 O2/N2, 1.0 atm ambient. The droplet remains stationary on the fiber and within the HiBMS FOV for the entire test. The flame is very dim in both the LLUV and color camera views.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-061_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet with no translation burning in a 0.18/0.82 O2/N2, 1.0 atm ambient. The droplet remains stationary on the fiber and within the HiBMS FOV for the entire test. The flame is very dim in both the LLUV and color camera views.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-061_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-061_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-061_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.82,
     "max": 0.82,
     "quality": "reported",
     "raw": "0.82",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 103.205,
     "max": 103.205,
     "quality": "reported",
     "raw": "774.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.68,
     "max": 3.68,
     "quality": "reported",
     "raw": "3.68",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-02-04",
     "quality": "reported",
     "raw": "2/4/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/62",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "301F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 62,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 23.36,
     "max": 23.36,
     "quality": "reported",
     "raw": "296.51",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-062_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 296.51",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-062_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 4.8,
     "max": 4.8,
     "quality": "reported",
     "raw": "4.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.39,
     "max": 0.39,
     "quality": "reported",
     "raw": "0.39",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.18/0.82 O2/N2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition and stays in the FOVs of all the cameras for the entire test. The HiBMS IPSU stopped recording images for a short time after visible flame extinction. There is continued rapid vaporization after visible flame extinction and the formation of a large vapor cloud. This is indicative of cool flame burning and extinction following visible flame extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.18/0.82 O2/N2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition and stays in the FOVs of all the cameras for the entire test. The HiBMS IPSU stopped recording images for a short time after visible flame extinction. There is continued rapid vaporization after visible flame extinction and the formation of a large vapor cloud. This is indicative of cool flame burning and extinction following visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-062_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.18/0.82 O2/N2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition and stays in the FOVs of all the cameras for the entire test. The HiBMS IPSU stopped recording images for a short time after visible flame extinction. There is continued rapid vaporization after visible flame extinction and the formation of a large vapor cloud. This is indicative of cool flame burning and extinction following visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-062_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.17,
     "max": 3.17,
     "quality": "reported",
     "raw": "3.17",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-062_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-062_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.82,
     "max": 0.82,
     "quality": "reported",
     "raw": "0.82",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.565,
     "max": 101.565,
     "quality": "reported",
     "raw": "761.8",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.43,
     "max": 3.43,
     "quality": "reported",
     "raw": "3.43",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-03-11",
     "quality": "reported",
     "raw": "3/11/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/63",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "301F002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 63,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.35,
     "max": 25.35,
     "quality": "reported",
     "raw": "298.50",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-063_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.50",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-063_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 9.6,
     "max": 9.6,
     "quality": "reported",
     "raw": "9.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.51,
     "max": 0.51,
     "quality": "reported",
     "raw": "0.51",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.18/0.82 O2/N2, 1.0 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition and out of the FOV 2/3rds of the through the test. There is a small disruption near the end of the test. Extrapolating the droplet history using the average burning rate constant shows a very small extinction droplet size, indicating the droplet burned essentially to completion.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.18/0.82 O2/N2, 1.0 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition and out of the FOV 2/3rds of the through the test. There is a small disruption near the end of the test. Extrapolating the droplet history using the average burning rate constant shows a very small extinction droplet size, indicating the droplet burned essentially to completion.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-063_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.18/0.82 O2/N2, 1.0 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition and out of the FOV 2/3rds of the through the test. There is a small disruption near the end of the test. Extrapolating the droplet history using the average burning rate constant shows a very small extinction droplet size, indicating the droplet burned essentially to completion.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-063_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-063_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-063_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.81,
     "max": 0.81,
     "quality": "reported",
     "raw": "0.81",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.338,
     "max": 102.338,
     "quality": "reported",
     "raw": "767.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.15,
     "max": 2.15,
     "quality": "reported",
     "raw": "2.15",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-03-11",
     "quality": "reported",
     "raw": "3/11/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/64",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "302F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 64,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 24.14,
     "max": 24.14,
     "quality": "reported",
     "raw": "297.29",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-064_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 297.29",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-064_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "5.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.6,
     "max": 0.6,
     "quality": "reported",
     "raw": "0.6",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet with 3 mm/sec translation (for approximately 4 sec) burning in a 0.18/0.82 O2/N2, 1.0 atm ambient environment. The flame has moderate transverse oscillations and remains within the HiBMS FOV for the entire test. The flame grows and becomes dim blue. During translation, the leading edge of the flame is bright and the fiber glows brightly. The trailing edge of the flame is much dimmer and the fiber does not glow. After translation stops, the flame extinguishes. There is significant droplet vaporization after visible flame extinction. There is a small disruption very late in the droplet lifetime that leaves a small residual droplet on the fiber. The behavior after visible flame extinction is indicative of cool flame burning and extinction.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet with 3 mm/sec translation (for approximately 4 sec) burning in a 0.18/0.82 O2/N2, 1.0 atm ambient environment. The flame has moderate transverse oscillations and remains within the HiBMS FOV for the entire test. The flame grows and becomes dim blue. During translation, the leading edge of the flame is bright and the fiber glows brightly. The trailing edge of the flame is much dimmer and the fiber does not glow. After translation stops, the flame extinguishes. There is significant droplet vaporization after visible flame extinction. There is a small disruption very late in the droplet lifetime that leaves a small residual droplet on the fiber. The behavior after visible flame extinction is indicative of cool flame burning and extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-064_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet with 3 mm/sec translation (for approximately 4 sec) burning in a 0.18/0.82 O2/N2, 1.0 atm ambient environment. The flame has moderate transverse oscillations and remains within the HiBMS FOV for the entire test. The flame grows and becomes dim blue. During translation, the leading edge of the flame is bright and the fiber glows brightly. The trailing edge of the flame is much dimmer and the fiber does not glow. After translation stops, the flame extinguishes. There is significant droplet vaporization after visible flame extinction. There is a small disruption very late in the droplet lifetime that leaves a small residual droplet on the fiber. The behavior after visible flame extinction is indicative of cool flame burning and extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-064_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.07,
     "max": 2.07,
     "quality": "reported",
     "raw": "2.07",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-064_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-064_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.81,
     "max": 0.81,
     "quality": "reported",
     "raw": "0.81",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.938,
     "max": 101.938,
     "quality": "reported",
     "raw": "764.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.69,
     "max": 2.69,
     "quality": "reported",
     "raw": "2.69",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-03-11",
     "quality": "reported",
     "raw": "3/11/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/65",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "189R001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 65,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.95,
     "max": 26.95,
     "quality": "reported",
     "raw": "300.10",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-065_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.10",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-065_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 24.3,
     "max": 24.3,
     "quality": "reported",
     "raw": "24.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. The droplet drifts SSE and out of the HiBMS FOV before the end of the test. The color camera IPSU did not record any images for this test. The LLUV shows a very long burn with a flame that appears to get a little bit brighter for a short period of time. There is no extinction droplet diameter listed because the droplet is out of the HiBMS FOV for most of the droplet lifetime.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. The droplet drifts SSE and out of the HiBMS FOV before the end of the test. The color camera IPSU did not record any images for this test. The LLUV shows a very long burn with a flame that appears to get a little bit brighter for a short period of time. There is no extinction droplet diameter listed because the droplet is out of the HiBMS FOV for most of the droplet lifetime.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-065_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. The droplet drifts SSE and out of the HiBMS FOV before the end of the test. The color camera IPSU did not record any images for this test. The LLUV shows a very long burn with a flame that appears to get a little bit brighter for a short period of time. There is no extinction droplet diameter listed because the droplet is out of the HiBMS FOV for most of the droplet lifetime.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-065_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-065_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-065_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.112,
     "max": 102.112,
     "quality": "reported",
     "raw": "765.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.37,
     "max": 3.37,
     "quality": "reported",
     "raw": "3.37",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-03-19",
     "quality": "reported",
     "raw": "3/19/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/66",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "189F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 66,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.13,
     "max": 27.13,
     "quality": "reported",
     "raw": "300.28",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-066_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.28",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-066_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 12.9,
     "max": 12.9,
     "quality": "reported",
     "raw": "12.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.38,
     "max": 0.38,
     "quality": "reported",
     "raw": "0.38",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. The droplet drifts SE and out of the HiBMS FOV, but then drifts back into the FOV a few seconds prior to flame extinction. There is a droplet shape change with the apparent ejection of some material during ignition. The droplet shape oscillates immediately after this. The color camera IPSU did not record any images for this test.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. The droplet drifts SE and out of the HiBMS FOV, but then drifts back into the FOV a few seconds prior to flame extinction. There is a droplet shape change with the apparent ejection of some material during ignition. The droplet shape oscillates immediately after this. The color camera IPSU did not record any images for this test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-066_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. The droplet drifts SE and out of the HiBMS FOV, but then drifts back into the FOV a few seconds prior to flame extinction. There is a droplet shape change with the apparent ejection of some material during ignition. The droplet shape oscillates immediately after this. The color camera IPSU did not record any images for this test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-066_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.32,
     "max": 1.32,
     "quality": "reported",
     "raw": "1.32",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-066_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-066_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.232,
     "max": 102.232,
     "quality": "reported",
     "raw": "766.8",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.52,
     "max": 2.52,
     "quality": "reported",
     "raw": "2.52",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-03-19",
     "quality": "reported",
     "raw": "3/19/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/67",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "189F002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 67,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.3,
     "max": 27.3,
     "quality": "reported",
     "raw": "300.45",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-067_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.45",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-067_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 14.4,
     "max": 14.4,
     "quality": "reported",
     "raw": "14.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.36,
     "max": 0.36,
     "quality": "reported",
     "raw": "0.36",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. The droplet drifts slowly E and then SE and out of the HiBMS FOV, but not until after flame extinction. The flame oscillates significantly before extinction.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. The droplet drifts slowly E and then SE and out of the HiBMS FOV, but not until after flame extinction. The flame oscillates significantly before extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-067_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. The droplet drifts slowly E and then SE and out of the HiBMS FOV, but not until after flame extinction. The flame oscillates significantly before extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-067_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.3,
     "max": 3.3,
     "quality": "reported",
     "raw": "3.3",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-067_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-067_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.352,
     "max": 102.352,
     "quality": "reported",
     "raw": "767.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.97,
     "max": 3.97,
     "quality": "reported",
     "raw": "3.97",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-03-19",
     "quality": "reported",
     "raw": "3/19/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/68",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "189R003",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 68,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.55,
     "max": 27.55,
     "quality": "reported",
     "raw": "300.70",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-068_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.70",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-068_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 10.7,
     "max": 10.7,
     "quality": "reported",
     "raw": "10.7",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.39,
     "max": 0.39,
     "quality": "reported",
     "raw": "0.39",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. The droplet drifts N slowly, the turns S and drifts slowly before accelerating out of the FOV right after visible flame extinction.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. The droplet drifts N slowly, the turns S and drifts slowly before accelerating out of the FOV right after visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-068_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. The droplet drifts N slowly, the turns S and drifts slowly before accelerating out of the FOV right after visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-068_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.29,
     "max": 1.29,
     "quality": "reported",
     "raw": "1.29",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-068_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-068_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.84,
     "max": 0.84,
     "quality": "reported",
     "raw": "0.84",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.498,
     "max": 102.498,
     "quality": "reported",
     "raw": "768.8",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.38,
     "max": 2.38,
     "quality": "reported",
     "raw": "2.38",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-03-19",
     "quality": "reported",
     "raw": "3/19/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/69",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "193R002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 69,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.13,
     "max": 27.13,
     "quality": "reported",
     "raw": "300.28",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-069_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.28",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-069_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 1.3,
     "max": 1.3,
     "quality": "reported",
     "raw": "1.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.94,
     "max": 0.94,
     "quality": "reported",
     "raw": "0.94",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet with no translation burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. There is siginficant droplet motion during the entire, very short burn. There appears to be some visible distortions where the droplet edge intersects the fiber. This was a small droplet with significant motion on fiber that had a large influence on the burning characteristics.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet with no translation burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. There is siginficant droplet motion during the entire, very short burn. There appears to be some visible distortions where the droplet edge intersects the fiber. This was a small droplet with significant motion on fiber that had a large influence on the burning characteristics.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-069_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet with no translation burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. There is siginficant droplet motion during the entire, very short burn. There appears to be some visible distortions where the droplet edge intersects the fiber. This was a small droplet with significant motion on fiber that had a large influence on the burning characteristics.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-069_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-069_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-069_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.84,
     "max": 0.84,
     "quality": "reported",
     "raw": "0.84",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.14,
     "max": 0.14,
     "quality": "reported",
     "raw": "0.14",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.272,
     "max": 102.272,
     "quality": "reported",
     "raw": "767.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.1,
     "max": 1.1,
     "quality": "reported",
     "raw": "1.1",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-03-23",
     "quality": "reported",
     "raw": "3/23/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/70",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "193F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 70,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 24.85,
     "max": 24.85,
     "quality": "reported",
     "raw": "298.00",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-070_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.00",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-070_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 1.6,
     "max": 1.6,
     "quality": "reported",
     "raw": "1.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.41,
     "max": 0.41,
     "quality": "reported",
     "raw": "0.41",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. There was extra fuel dispensed after the automated sequence started. The droplet drifts NW in the HiBMS FOV after deployment, hits the upper igniter and then quickly drifts SE and out of the HiBMS FOV. The post deployment/ignition velocity is quite high, approximately 8 mm/sec. The color camera IPSU did not record any images after deployment. It is unknown whether there was cool flame burning and extinction for this test.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. There was extra fuel dispensed after the automated sequence started. The droplet drifts NW in the HiBMS FOV after deployment, hits the upper igniter and then quickly drifts SE and out of the HiBMS FOV. The post deployment/ignition velocity is quite high, approximately 8 mm/sec. The color camera IPSU did not record any images after deployment. It is unknown whether there was cool flame burning and extinction for this test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-070_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. There was extra fuel dispensed after the automated sequence started. The droplet drifts NW in the HiBMS FOV after deployment, hits the upper igniter and then quickly drifts SE and out of the HiBMS FOV. The post deployment/ignition velocity is quite high, approximately 8 mm/sec. The color camera IPSU did not record any images after deployment. It is unknown whether there was cool flame burning and extinction for this test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-070_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 4.6,
     "max": 4.6,
     "quality": "reported",
     "raw": "4.6",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-070_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-070_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.84,
     "max": 0.84,
     "quality": "reported",
     "raw": "0.84",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.458,
     "max": 101.458,
     "quality": "reported",
     "raw": "761",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 4.67,
     "max": 4.67,
     "quality": "reported",
     "raw": "4.67",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-03-23",
     "quality": "reported",
     "raw": "3/23/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/71",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "189R002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 71,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.45,
     "max": 27.45,
     "quality": "reported",
     "raw": "300.60",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-071_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.60",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-071_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8.4,
     "max": 8.4,
     "quality": "reported",
     "raw": "8.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. The droplet has a high drift velocity to the N after deployment. The droplet hits the igniter and then continues to move NNW after ignition at approx 7 - 8 mm/sec. It leaves the HiBMS FOV relatively quickly and well before flame extinction. There is no extinction droplet diameter listed since the droplet was out of the HiBMS FOV for most of the burn. The color camera IPSU did not record any images after deployment for this test.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. The droplet has a high drift velocity to the N after deployment. The droplet hits the igniter and then continues to move NNW after ignition at approx 7 - 8 mm/sec. It leaves the HiBMS FOV relatively quickly and well before flame extinction. There is no extinction droplet diameter listed since the droplet was out of the HiBMS FOV for most of the burn. The color camera IPSU did not record any images after deployment for this test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-071_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. The droplet has a high drift velocity to the N after deployment. The droplet hits the igniter and then continues to move NNW after ignition at approx 7 - 8 mm/sec. It leaves the HiBMS FOV relatively quickly and well before flame extinction. There is no extinction droplet diameter listed since the droplet was out of the HiBMS FOV for most of the burn. The color camera IPSU did not record any images after deployment for this test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-071_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-071_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-071_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.84,
     "max": 0.84,
     "quality": "reported",
     "raw": "0.84",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.432,
     "max": 102.432,
     "quality": "reported",
     "raw": "768.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.25,
     "max": 2.25,
     "quality": "reported",
     "raw": "2.25",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-03-19",
     "quality": "reported",
     "raw": "3/19/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/72",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "193R001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 72,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.46,
     "max": 26.46,
     "quality": "reported",
     "raw": "299.61",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-072_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.61",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-072_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. This is a very small droplet, smaller than would be typically recommended to burn in the apparatus. The droplet drifts NNW in the HiBMS FOV after deployment and ignition with a significant (7 - 8 mm/sec) velocity and leaves the FOV before the test is complete. The droplet burns to completion without disruption with a dim blue flame and only a little luminous region after ignition.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. This is a very small droplet, smaller than would be typically recommended to burn in the apparatus. The droplet drifts NNW in the HiBMS FOV after deployment and ignition with a significant (7 - 8 mm/sec) velocity and leaves the FOV before the test is complete. The droplet burns to completion without disruption with a dim blue flame and only a little luminous region after ignition.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-072_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. This is a very small droplet, smaller than would be typically recommended to burn in the apparatus. The droplet drifts NNW in the HiBMS FOV after deployment and ignition with a significant (7 - 8 mm/sec) velocity and leaves the FOV before the test is complete. The droplet burns to completion without disruption with a dim blue flame and only a little luminous region after ignition.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-072_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-072_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-072_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.84,
     "max": 0.84,
     "quality": "reported",
     "raw": "0.84",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.018,
     "max": 102.018,
     "quality": "reported",
     "raw": "765.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.13,
     "max": 1.13,
     "quality": "reported",
     "raw": "1.13",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-03-23",
     "quality": "reported",
     "raw": "3/23/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/73",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "193F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 73,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 24.85,
     "max": 24.85,
     "quality": "reported",
     "raw": "298.00",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-073_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.00",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-073_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. There was an error in the automated test sequence and the MDCA dispensed fuel before deployment. The result was a very large droplet, much larger than intended. The droplet drifts NW in the HiBMS FOV after deployment, then hits the igniter and starts to drift SE and quickly out of the FOV. The droplet lifetime is very short with flame extinction occurring only a few seconds after igniter withdraw. The color camera IPSU did not record any images after deployment. There is not enough evidence to know whether this test exhibited cool flame burning and extinction after visible flame extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. There was an error in the automated test sequence and the MDCA dispensed fuel before deployment. The result was a very large droplet, much larger than intended. The droplet drifts NW in the HiBMS FOV after deployment, then hits the igniter and starts to drift SE and quickly out of the FOV. The droplet lifetime is very short with flame extinction occurring only a few seconds after igniter withdraw. The color camera IPSU did not record any images after deployment. There is not enough evidence to know whether this test exhibited cool flame burning and extinction after visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-073_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. There was an error in the automated test sequence and the MDCA dispensed fuel before deployment. The result was a very large droplet, much larger than intended. The droplet drifts NW in the HiBMS FOV after deployment, then hits the igniter and starts to drift SE and quickly out of the FOV. The droplet lifetime is very short with flame extinction occurring only a few seconds after igniter withdraw. The color camera IPSU did not record any images after deployment. There is not enough evidence to know whether this test exhibited cool flame burning and extinction after visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-073_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 4.58,
     "max": 4.58,
     "quality": "reported",
     "raw": "4.58",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-073_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-073_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.84,
     "max": 0.84,
     "quality": "reported",
     "raw": "0.84",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.458,
     "max": 101.458,
     "quality": "reported",
     "raw": "761",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 4.64,
     "max": 4.64,
     "quality": "reported",
     "raw": "4.64",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-03-23",
     "quality": "reported",
     "raw": "3/23/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/74",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "221F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 74,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.84,
     "max": 26.84,
     "quality": "reported",
     "raw": "299.99",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-074_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.99",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-074_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 2.3,
     "max": 2.3,
     "quality": "reported",
     "raw": "2.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.77,
     "max": 0.77,
     "quality": "reported",
     "raw": "0.77",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. There are significant oscillation on the fiber after deployment that persist throughout the burn. The oscillations cause the droplet to become misshapen and cause large errors/scatter in the droplet size measurement. This is a very short burn and although there is not a large disruption, the oscillations compromise the data from the test.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. There are significant oscillation on the fiber after deployment that persist throughout the burn. The oscillations cause the droplet to become misshapen and cause large errors/scatter in the droplet size measurement. This is a very short burn and although there is not a large disruption, the oscillations compromise the data from the test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-074_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. There are significant oscillation on the fiber after deployment that persist throughout the burn. The oscillations cause the droplet to become misshapen and cause large errors/scatter in the droplet size measurement. This is a very short burn and although there is not a large disruption, the oscillations compromise the data from the test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-074_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-074_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-074_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.84,
     "max": 0.84,
     "quality": "reported",
     "raw": "0.84",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.112,
     "max": 102.112,
     "quality": "reported",
     "raw": "765.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.33,
     "max": 1.33,
     "quality": "reported",
     "raw": "1.33",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-03-23",
     "quality": "reported",
     "raw": "3/23/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/75",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "203R002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 75,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.27,
     "max": 27.27,
     "quality": "reported",
     "raw": "300.42",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-075_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.42",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-075_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 9.1,
     "max": 9.1,
     "quality": "reported",
     "raw": "9.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.37,
     "max": 0.37,
     "quality": "reported",
     "raw": "0.37",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.13/0.85 O2/N2, 1.0 atm ambient environment. After deployment, there is some transverse, but no axial motion along fiber. The transverse motion persists throughout the test, but stops after flame extinction. There is no axial motion relative to the fiber, the droplet starts and stops with the start and stop of the fiber. There is no disruption during this test.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.13/0.85 O2/N2, 1.0 atm ambient environment. After deployment, there is some transverse, but no axial motion along fiber. The transverse motion persists throughout the test, but stops after flame extinction. There is no axial motion relative to the fiber, the droplet starts and stops with the start and stop of the fiber. There is no disruption during this test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-075_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.13/0.85 O2/N2, 1.0 atm ambient environment. After deployment, there is some transverse, but no axial motion along fiber. The transverse motion persists throughout the test, but stops after flame extinction. There is no axial motion relative to the fiber, the droplet starts and stops with the start and stop of the fiber. There is no disruption during this test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-075_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.78,
     "max": 1.78,
     "quality": "reported",
     "raw": "1.78",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-075_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-075_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.13,
     "max": 0.13,
     "quality": "reported",
     "raw": "0.13",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.765,
     "max": 102.765,
     "quality": "reported",
     "raw": "770.8",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.54,
     "max": 2.54,
     "quality": "reported",
     "raw": "2.54",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-03-29",
     "quality": "reported",
     "raw": "3/29/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/76",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "203F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 76,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.74,
     "max": 26.74,
     "quality": "reported",
     "raw": "299.89",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-076_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.89",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-076_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8.9,
     "max": 8.9,
     "quality": "reported",
     "raw": "8.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.37,
     "max": 0.37,
     "quality": "reported",
     "raw": "0.37",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet burning in a 0.14/0.86 O2/N2, 1.0 atm ambient environment. The droplet oscillates axially on the fiber throughout the flame lifetime, only becoming quiescient after visible flame extinction.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet burning in a 0.14/0.86 O2/N2, 1.0 atm ambient environment. The droplet oscillates axially on the fiber throughout the flame lifetime, only becoming quiescient after visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-076_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet burning in a 0.14/0.86 O2/N2, 1.0 atm ambient environment. The droplet oscillates axially on the fiber throughout the flame lifetime, only becoming quiescient after visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-076_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.78,
     "max": 2.78,
     "quality": "reported",
     "raw": "2.78",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-076_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-076_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.13,
     "max": 0.13,
     "quality": "reported",
     "raw": "0.13",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.592,
     "max": 102.592,
     "quality": "reported",
     "raw": "769.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.21,
     "max": 3.21,
     "quality": "reported",
     "raw": "3.21",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-03-29",
     "quality": "reported",
     "raw": "3/29/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/77",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "175R001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 77,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.68,
     "max": 26.68,
     "quality": "reported",
     "raw": "299.83",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-077_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.83",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-077_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8.5,
     "max": 8.5,
     "quality": "reported",
     "raw": "8.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.34,
     "max": 0.34,
     "quality": "reported",
     "raw": "0.34",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.14/0.85 O2/N2, 1.0 atm ambient environment. There was very little droplet motion after deployment and ignition (it only moved a few mm during the entire test).",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.14/0.85 O2/N2, 1.0 atm ambient environment. There was very little droplet motion after deployment and ignition (it only moved a few mm during the entire test).",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-077_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.14/0.85 O2/N2, 1.0 atm ambient environment. There was very little droplet motion after deployment and ignition (it only moved a few mm during the entire test).",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-077_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.91,
     "max": 2.91,
     "quality": "reported",
     "raw": "2.91",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-077_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-077_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.14,
     "max": 0.14,
     "quality": "reported",
     "raw": "0.14",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.445,
     "max": 102.445,
     "quality": "reported",
     "raw": "768.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.33,
     "max": 3.33,
     "quality": "reported",
     "raw": "3.33",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-03-29",
     "quality": "reported",
     "raw": "3/29/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/78",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "175F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 78,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.31,
     "max": 26.31,
     "quality": "reported",
     "raw": "299.46",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-078_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.46",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-078_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 12.9,
     "max": 12.9,
     "quality": "reported",
     "raw": "12.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.14/0.85 O2/N2, 1.0 atm ambient environment. There was very little droplet motion after ignition. Halfway through the burn, the droplet begins to drift E at approximately 3 mm/sec. It drifts out of the HiBMS FOV just before flame extinction. The extinction droplet diameter is extrapolated from the droplet history and the measured average burning rate constant just prior to the droplet leaving the HiBMS FOV.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.14/0.85 O2/N2, 1.0 atm ambient environment. There was very little droplet motion after ignition. Halfway through the burn, the droplet begins to drift E at approximately 3 mm/sec. It drifts out of the HiBMS FOV just before flame extinction. The extinction droplet diameter is extrapolated from the droplet history and the measured average burning rate constant just prior to the droplet leaving the HiBMS FOV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-078_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.14/0.85 O2/N2, 1.0 atm ambient environment. There was very little droplet motion after ignition. Halfway through the burn, the droplet begins to drift E at approximately 3 mm/sec. It drifts out of the HiBMS FOV just before flame extinction. The extinction droplet diameter is extrapolated from the droplet history and the measured average burning rate constant just prior to the droplet leaving the HiBMS FOV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-078_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.66,
     "max": 1.66,
     "quality": "reported",
     "raw": "1.66",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-078_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-078_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.14,
     "max": 0.14,
     "quality": "reported",
     "raw": "0.14",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.125,
     "max": 102.125,
     "quality": "reported",
     "raw": "766",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.66,
     "max": 2.66,
     "quality": "reported",
     "raw": "2.66",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-03-29",
     "quality": "reported",
     "raw": "3/29/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/79",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "179F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 79,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.36,
     "max": 27.36,
     "quality": "reported",
     "raw": "300.51",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-079_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.51",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-079_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.13/0.85 O2/N2, 1.0 atm ambient environment. Very short burn that is entirely transient. This ambient is likely below the quasi-steady flammability limit. There is a small vapor cloud that forms shortly after visible flame extinction. This may be indicative of cool flame burning and extinction following hot flame extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.13/0.85 O2/N2, 1.0 atm ambient environment. Very short burn that is entirely transient. This ambient is likely below the quasi-steady flammability limit. There is a small vapor cloud that forms shortly after visible flame extinction. This may be indicative of cool flame burning and extinction following hot flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-079_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.13/0.85 O2/N2, 1.0 atm ambient environment. Very short burn that is entirely transient. This ambient is likely below the quasi-steady flammability limit. There is a small vapor cloud that forms shortly after visible flame extinction. This may be indicative of cool flame burning and extinction following hot flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-079_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.86,
     "max": 2.86,
     "quality": "reported",
     "raw": "2.86",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-079_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-079_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.13,
     "max": 0.13,
     "quality": "reported",
     "raw": "0.13",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.405,
     "max": 102.405,
     "quality": "reported",
     "raw": "768.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.92,
     "max": 2.92,
     "quality": "reported",
     "raw": "2.92",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-03-30",
     "quality": "reported",
     "raw": "3/30/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/80",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "207F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 80,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.27,
     "max": 27.27,
     "quality": "reported",
     "raw": "300.42",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-080_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.42",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-080_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Burn time; s"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. The HiBMS IPSU did not record any images for this test. This was a very short flame lifetime with the flame extinguishing before the droplet started translating. There was a small vapor cloud formed some time after visible flame extinction. It is unclear whether there was cool flame burning and extinction following visible flame extinction.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. The HiBMS IPSU did not record any images for this test. This was a very short flame lifetime with the flame extinguishing before the droplet started translating. There was a small vapor cloud formed some time after visible flame extinction. It is unclear whether there was cool flame burning and extinction following visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-080_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. The HiBMS IPSU did not record any images for this test. This was a very short flame lifetime with the flame extinguishing before the droplet started translating. There was a small vapor cloud formed some time after visible flame extinction. It is unclear whether there was cool flame burning and extinction following visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-080_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-080_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-080_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.13,
     "max": 0.13,
     "quality": "reported",
     "raw": "0.13",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.658,
     "max": 102.658,
     "quality": "reported",
     "raw": "770",
     "column": "Ambient pressure; mmHg"
    },
    "test_date": {
     "text": "2010-03-30",
     "quality": "reported",
     "raw": "3/30/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/81",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "207F002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 81,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.24,
     "max": 27.24,
     "quality": "reported",
     "raw": "300.39",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-081_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.39",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-081_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "Burn time; s"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. The HiBMS IPSU did not record any images and the color camera IPSU did not record any images after deployment. This was a very short burn with almost no burning after igniter withdraw.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. The HiBMS IPSU did not record any images and the color camera IPSU did not record any images after deployment. This was a very short burn with almost no burning after igniter withdraw.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-081_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. The HiBMS IPSU did not record any images and the color camera IPSU did not record any images after deployment. This was a very short burn with almost no burning after igniter withdraw.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-081_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-081_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-081_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.13,
     "max": 0.13,
     "quality": "reported",
     "raw": "0.13",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.685,
     "max": 102.685,
     "quality": "reported",
     "raw": "770.2",
     "column": "Ambient pressure; mmHg"
    },
    "test_date": {
     "text": "2010-03-30",
     "quality": "reported",
     "raw": "3/30/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/82",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "304F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 82,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.34,
     "max": 25.34,
     "quality": "reported",
     "raw": "298.49",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-082_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.49",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-082_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 7.5,
     "max": 7.5,
     "quality": "reported",
     "raw": "7.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. Very good deployment and ignition with almost no residual motion. The droplet does drift S in the HiBMS and out of the FOV, but not until well after flame extinction. This was a very dim flame.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. Very good deployment and ignition with almost no residual motion. The droplet does drift S in the HiBMS and out of the FOV, but not until well after flame extinction. This was a very dim flame.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-082_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. Very good deployment and ignition with almost no residual motion. The droplet does drift S in the HiBMS and out of the FOV, but not until well after flame extinction. This was a very dim flame.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-082_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.39,
     "max": 2.39,
     "quality": "reported",
     "raw": "2.39",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-082_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-082_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.87,
     "max": 0.87,
     "quality": "reported",
     "raw": "0.87",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.13,
     "max": 0.13,
     "quality": "reported",
     "raw": "0.13",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.938,
     "max": 101.938,
     "quality": "reported",
     "raw": "764.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.84,
     "max": 2.84,
     "quality": "reported",
     "raw": "2.84",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-04-19",
     "quality": "reported",
     "raw": "4/19/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/83",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "304F002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 83,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.19,
     "max": 27.19,
     "quality": "reported",
     "raw": "300.34",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-083_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.34",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-083_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 5.45,
     "max": 5.45,
     "quality": "reported",
     "raw": "5.45",
     "column": "Burn time; s"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.12/0.88 O2/N2, 1.0 atm ambient environment. The HiBMS IPSU did not record any images for this test. The droplet does not drift after deployment and ignition and stays in the FOVs of both the LLUV and color cameras. The flame is very dim and almost undetectable by the LLUV (especially later in the flame lifetime). As a result, the LLUV flame size measurements for the last half of the test are not accurate (the flame essentially undetectable by the LLUV).",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.12/0.88 O2/N2, 1.0 atm ambient environment. The HiBMS IPSU did not record any images for this test. The droplet does not drift after deployment and ignition and stays in the FOVs of both the LLUV and color cameras. The flame is very dim and almost undetectable by the LLUV (especially later in the flame lifetime). As a result, the LLUV flame size measurements for the last half of the test are not accurate (the flame essentially undetectable by the LLUV).",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-083_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.12/0.88 O2/N2, 1.0 atm ambient environment. The HiBMS IPSU did not record any images for this test. The droplet does not drift after deployment and ignition and stays in the FOVs of both the LLUV and color cameras. The flame is very dim and almost undetectable by the LLUV (especially later in the flame lifetime). As a result, the LLUV flame size measurements for the last half of the test are not accurate (the flame essentially undetectable by the LLUV).",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-083_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-083_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-083_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.87,
     "max": 0.87,
     "quality": "reported",
     "raw": "0.87",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.12,
     "max": 0.12,
     "quality": "reported",
     "raw": "0.12",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.925,
     "max": 102.925,
     "quality": "reported",
     "raw": "772",
     "column": "Ambient pressure; mmHg"
    },
    "test_date": {
     "text": "2010-04-19",
     "quality": "reported",
     "raw": "4/19/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/84",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "304R001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 84,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.7,
     "max": 25.7,
     "quality": "reported",
     "raw": "298.85",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-084_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.85",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-084_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 10.8,
     "max": 10.8,
     "quality": "reported",
     "raw": "10.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. The droplet drifts N after deployment and ignition (deployment-induced motion) and out of the HiBMS FOV halfway through the test. The flame stays within the LLUV and color camera FOVs the entire test. The droplet burns for a long time in this ambient environment. The extinction droplet diameter is based on extrapolating the droplet history using the measured burning rate constant while the droplet is within the HiBMS FOV. The flame was very dim and the LLUV flame data is not as reliable because of the intensifier noise.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. The droplet drifts N after deployment and ignition (deployment-induced motion) and out of the HiBMS FOV halfway through the test. The flame stays within the LLUV and color camera FOVs the entire test. The droplet burns for a long time in this ambient environment. The extinction droplet diameter is based on extrapolating the droplet history using the measured burning rate constant while the droplet is within the HiBMS FOV. The flame was very dim and the LLUV flame data is not as reliable because of the intensifier noise.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-084_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. The droplet drifts N after deployment and ignition (deployment-induced motion) and out of the HiBMS FOV halfway through the test. The flame stays within the LLUV and color camera FOVs the entire test. The droplet burns for a long time in this ambient environment. The extinction droplet diameter is based on extrapolating the droplet history using the measured burning rate constant while the droplet is within the HiBMS FOV. The flame was very dim and the LLUV flame data is not as reliable because of the intensifier noise.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-084_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.42,
     "max": 1.42,
     "quality": "reported",
     "raw": "1.42",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-084_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-084_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.87,
     "max": 0.87,
     "quality": "reported",
     "raw": "0.87",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.12,
     "max": 0.12,
     "quality": "reported",
     "raw": "0.12",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.285,
     "max": 102.285,
     "quality": "reported",
     "raw": "767.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.35,
     "max": 2.35,
     "quality": "reported",
     "raw": "2.35",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-04-19",
     "quality": "reported",
     "raw": "4/19/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/85",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "304R002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 85,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.84,
     "max": 26.84,
     "quality": "reported",
     "raw": "299.99",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-085_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.99",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-085_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 9.3,
     "max": 9.3,
     "quality": "reported",
     "raw": "9.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. The droplet drifts NW in the HiBMS FOV and out of the FOV about half way through the test. The flame stays within the LLUV and color camera FOVs for the entire test. The extinction droplet diameter is based on extrapolating the droplet history using the known burning rate constant from droplet history just prior to the droplet leaving the HiBMS FOV.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. The droplet drifts NW in the HiBMS FOV and out of the FOV about half way through the test. The flame stays within the LLUV and color camera FOVs for the entire test. The extinction droplet diameter is based on extrapolating the droplet history using the known burning rate constant from droplet history just prior to the droplet leaving the HiBMS FOV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-085_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. The droplet drifts NW in the HiBMS FOV and out of the FOV about half way through the test. The flame stays within the LLUV and color camera FOVs for the entire test. The extinction droplet diameter is based on extrapolating the droplet history using the known burning rate constant from droplet history just prior to the droplet leaving the HiBMS FOV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-085_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.77,
     "max": 1.77,
     "quality": "reported",
     "raw": "1.77",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-085_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-085_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.87,
     "max": 0.87,
     "quality": "reported",
     "raw": "0.87",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.12,
     "max": 0.12,
     "quality": "reported",
     "raw": "0.12",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.818,
     "max": 102.818,
     "quality": "reported",
     "raw": "771.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.4,
     "max": 2.4,
     "quality": "reported",
     "raw": "2.4",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-04-19",
     "quality": "reported",
     "raw": "4/19/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/86",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "305F002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 86,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.64,
     "max": 26.64,
     "quality": "reported",
     "raw": "299.79",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-086_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.79",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-086_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 9,
     "max": 9,
     "quality": "reported",
     "raw": "9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. The droplet oscillates transversely on fiber throughout the test. It continues to move (relative to the fiber) even after the fiber stops translating. It drifts out of the HiBMS FOV and to the edge of the LLUV FOV. Only about half the test is captured by the HiBMS. The color camera IPSU did not any images after deployment. The extinction droplet diameter is based on extrapolating the droplet history using the measured burning rate constant while the droplet is within the HiBMS FOV (and extinction from the LLUV).",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. The droplet oscillates transversely on fiber throughout the test. It continues to move (relative to the fiber) even after the fiber stops translating. It drifts out of the HiBMS FOV and to the edge of the LLUV FOV. Only about half the test is captured by the HiBMS. The color camera IPSU did not any images after deployment. The extinction droplet diameter is based on extrapolating the droplet history using the measured burning rate constant while the droplet is within the HiBMS FOV (and extinction from the LLUV).",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-086_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. The droplet oscillates transversely on fiber throughout the test. It continues to move (relative to the fiber) even after the fiber stops translating. It drifts out of the HiBMS FOV and to the edge of the LLUV FOV. Only about half the test is captured by the HiBMS. The color camera IPSU did not any images after deployment. The extinction droplet diameter is based on extrapolating the droplet history using the measured burning rate constant while the droplet is within the HiBMS FOV (and extinction from the LLUV).",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-086_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.56,
     "max": 2.56,
     "quality": "reported",
     "raw": "2.56",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-086_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-086_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.87,
     "max": 0.87,
     "quality": "reported",
     "raw": "0.87",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.12,
     "max": 0.12,
     "quality": "reported",
     "raw": "0.12",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.658,
     "max": 102.658,
     "quality": "reported",
     "raw": "770",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.07,
     "max": 3.07,
     "quality": "reported",
     "raw": "3.07",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-04-19",
     "quality": "reported",
     "raw": "4/19/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/87",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "305F003",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 87,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.06,
     "max": 27.06,
     "quality": "reported",
     "raw": "300.21",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-087_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.21",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-087_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 9.3,
     "max": 9.3,
     "quality": "reported",
     "raw": "9.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.38,
     "max": 0.38,
     "quality": "reported",
     "raw": "0.38",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet with no translation in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. After deployment and ignition, there are significant axial oscillations along fiber axis throughout the burn. The osciallations are significant and persistent. The droplet remains within the HiBMS FOV for the entire test. The droplet burns for a relatively long time in this low O2 ambient. The flame was very dim and the LLUV flame size measurements are not reliable.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet with no translation in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. After deployment and ignition, there are significant axial oscillations along fiber axis throughout the burn. The osciallations are significant and persistent. The droplet remains within the HiBMS FOV for the entire test. The droplet burns for a relatively long time in this low O2 ambient. The flame was very dim and the LLUV flame size measurements are not reliable.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-087_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet with no translation in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. After deployment and ignition, there are significant axial oscillations along fiber axis throughout the burn. The osciallations are significant and persistent. The droplet remains within the HiBMS FOV for the entire test. The droplet burns for a relatively long time in this low O2 ambient. The flame was very dim and the LLUV flame size measurements are not reliable.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-087_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.92,
     "max": 1.92,
     "quality": "reported",
     "raw": "1.92",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-087_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-087_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.87,
     "max": 0.87,
     "quality": "reported",
     "raw": "0.87",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.12,
     "max": 0.12,
     "quality": "reported",
     "raw": "0.12",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.818,
     "max": 102.818,
     "quality": "reported",
     "raw": "771.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.64,
     "max": 2.64,
     "quality": "reported",
     "raw": "2.64",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-04-19",
     "quality": "reported",
     "raw": "4/19/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/88",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "053R001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 88,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.7,
     "max": 26.7,
     "quality": "reported",
     "raw": "299.85",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-088_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.85",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-088_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 14.8,
     "max": 14.8,
     "quality": "reported",
     "raw": "14.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.53,
     "max": 0.53,
     "quality": "reported",
     "raw": "0.53",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.25/0.60/0.15 O2/N2/CO2, 0.70 atm ambient environment. The droplet deploys and ignites with almost no residual motion. It stays within the HiBMS FOV for the entire test. The droplet burns cleanly with a brighter blue flame the entire test. Near the end of test, there is droplet deformation (becoming football shaped), and then disruption that is coincident with flame extinction. The droplet shatters at the end of the test. The end of the test is likely compromised by the conformal coating needle contamination.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.25/0.60/0.15 O2/N2/CO2, 0.70 atm ambient environment. The droplet deploys and ignites with almost no residual motion. It stays within the HiBMS FOV for the entire test. The droplet burns cleanly with a brighter blue flame the entire test. Near the end of test, there is droplet deformation (becoming football shaped), and then disruption that is coincident with flame extinction. The droplet shatters at the end of the test. The end of the test is likely compromised by the conformal coating needle contamination.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-088_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.25/0.60/0.15 O2/N2/CO2, 0.70 atm ambient environment. The droplet deploys and ignites with almost no residual motion. It stays within the HiBMS FOV for the entire test. The droplet burns cleanly with a brighter blue flame the entire test. Near the end of test, there is droplet deformation (becoming football shaped), and then disruption that is coincident with flame extinction. The droplet shatters at the end of the test. The end of the test is likely compromised by the conformal coating needle contamination.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-088_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-088_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-088_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.6,
     "max": 0.6,
     "quality": "reported",
     "raw": "0.6",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.6608,
     "max": 71.6608,
     "quality": "reported",
     "raw": "537.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.01,
     "max": 3.01,
     "quality": "reported",
     "raw": "3.01",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-05-05",
     "quality": "reported",
     "raw": "5/5/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/89",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "053F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 89,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.64,
     "max": 26.64,
     "quality": "reported",
     "raw": "299.79",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-089_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.79",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-089_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 24,
     "max": 24,
     "quality": "reported",
     "raw": "24",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.51,
     "max": 0.51,
     "quality": "reported",
     "raw": "0.51",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.25/0.60/0.15 O2/N2/CO2, 0.70 atm ambient environment. The droplet slowly drifts E in the HiBMS FOV and out of the FOV before the test ends. Just as the droplet leaves the HiBMS FOV, the liquid starts to oscillate slightly; the motion is visible in the color camera view. The flame extinguishes abruptly, and is likely due to disruption.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.25/0.60/0.15 O2/N2/CO2, 0.70 atm ambient environment. The droplet slowly drifts E in the HiBMS FOV and out of the FOV before the test ends. Just as the droplet leaves the HiBMS FOV, the liquid starts to oscillate slightly; the motion is visible in the color camera view. The flame extinguishes abruptly, and is likely due to disruption.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-089_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.25/0.60/0.15 O2/N2/CO2, 0.70 atm ambient environment. The droplet slowly drifts E in the HiBMS FOV and out of the FOV before the test ends. Just as the droplet leaves the HiBMS FOV, the liquid starts to oscillate slightly; the motion is visible in the color camera view. The flame extinguishes abruptly, and is likely due to disruption.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-089_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-089_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-089_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.6,
     "max": 0.6,
     "quality": "reported",
     "raw": "0.6",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.6475,
     "max": 71.6475,
     "quality": "reported",
     "raw": "537.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.7,
     "max": 3.7,
     "quality": "reported",
     "raw": "3.7",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-05-05",
     "quality": "reported",
     "raw": "5/5/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/90",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "141R001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 90,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.28,
     "max": 27.28,
     "quality": "reported",
     "raw": "300.43",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-090_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.43",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-090_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 20.1,
     "max": 20.1,
     "quality": "reported",
     "raw": "20.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.53,
     "max": 0.53,
     "quality": "reported",
     "raw": "0.53",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet with no translation in a 0.25/0.60/0.15 O2/N2/CO2, 0.70 atm ambient environment. There is significant axial and transverse oscillations on the fiber after ignition. While the droplet is oscillating on the fiber, there are 'sparklers' evident on the color camera view. The oscillations diminish and the droplet burns cleanly (on the color camera view as well). A few seconds before there is a disruption (without dislocation) and then a complete disruption/dislocation/flame extinction.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet with no translation in a 0.25/0.60/0.15 O2/N2/CO2, 0.70 atm ambient environment. There is significant axial and transverse oscillations on the fiber after ignition. While the droplet is oscillating on the fiber, there are 'sparklers' evident on the color camera view. The oscillations diminish and the droplet burns cleanly (on the color camera view as well). A few seconds before there is a disruption (without dislocation) and then a complete disruption/dislocation/flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-090_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet with no translation in a 0.25/0.60/0.15 O2/N2/CO2, 0.70 atm ambient environment. There is significant axial and transverse oscillations on the fiber after ignition. While the droplet is oscillating on the fiber, there are 'sparklers' evident on the color camera view. The oscillations diminish and the droplet burns cleanly (on the color camera view as well). A few seconds before there is a disruption (without dislocation) and then a complete disruption/dislocation/flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-090_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-090_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-090_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.6,
     "max": 0.6,
     "quality": "reported",
     "raw": "0.6",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.8874,
     "max": 71.8874,
     "quality": "reported",
     "raw": "539.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.62,
     "max": 3.62,
     "quality": "reported",
     "raw": "3.62",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-05-06",
     "quality": "reported",
     "raw": "5/6/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/91",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "141F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 91,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.98,
     "max": 26.98,
     "quality": "reported",
     "raw": "300.13",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-091_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.13",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-091_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 18,
     "max": 18,
     "quality": "reported",
     "raw": "18",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.51,
     "max": 0.51,
     "quality": "reported",
     "raw": "0.51",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet with 3 mm/sec translation in a 0.25/0.60/0.15 O2/N2/CO2, 0.70 atm ambient environment. There are moderate axial oscillations on the fiber (lower frequency than some of the tests with severe oscillations) while the droplet is translating. The oscillations stop and the droplet burns nicely until the end of the test when there is a disruption coincident with flame extinction. The increase in droplet size at the end of the test is likely the result of bubble nucleation and growth.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet with 3 mm/sec translation in a 0.25/0.60/0.15 O2/N2/CO2, 0.70 atm ambient environment. There are moderate axial oscillations on the fiber (lower frequency than some of the tests with severe oscillations) while the droplet is translating. The oscillations stop and the droplet burns nicely until the end of the test when there is a disruption coincident with flame extinction. The increase in droplet size at the end of the test is likely the result of bubble nucleation and growth.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-091_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet with 3 mm/sec translation in a 0.25/0.60/0.15 O2/N2/CO2, 0.70 atm ambient environment. There are moderate axial oscillations on the fiber (lower frequency than some of the tests with severe oscillations) while the droplet is translating. The oscillations stop and the droplet burns nicely until the end of the test when there is a disruption coincident with flame extinction. The increase in droplet size at the end of the test is likely the result of bubble nucleation and growth.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-091_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-091_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-091_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.6,
     "max": 0.6,
     "quality": "reported",
     "raw": "0.6",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.7674,
     "max": 71.7674,
     "quality": "reported",
     "raw": "538.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.51,
     "max": 3.51,
     "quality": "reported",
     "raw": "3.51",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-05-05",
     "quality": "reported",
     "raw": "5/5/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/92",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "061F002",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 92,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.35,
     "max": 26.35,
     "quality": "reported",
     "raw": "299.50",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-092_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.50",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-092_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 21.7,
     "max": 21.7,
     "quality": "reported",
     "raw": "21.7",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.55,
     "max": 0.55,
     "quality": "reported",
     "raw": "0.55",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.14/0.86 O2/N2, 0.7 atm ambient environment. The droplet drifts N and out of the HiBMS FOV before the burn is complete (about 60% of the burn captured with HiBMS). The droplet burns for a very long time. The burn looks very clean, burns to a small size, with a disruption that is coincident with flame extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.14/0.86 O2/N2, 0.7 atm ambient environment. The droplet drifts N and out of the HiBMS FOV before the burn is complete (about 60% of the burn captured with HiBMS). The droplet burns for a very long time. The burn looks very clean, burns to a small size, with a disruption that is coincident with flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-092_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.14/0.86 O2/N2, 0.7 atm ambient environment. The droplet drifts N and out of the HiBMS FOV before the burn is complete (about 60% of the burn captured with HiBMS). The droplet burns for a very long time. The burn looks very clean, burns to a small size, with a disruption that is coincident with flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-092_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-092_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-092_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.6,
     "max": 0.6,
     "quality": "reported",
     "raw": "0.6",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.5008,
     "max": 71.5008,
     "quality": "reported",
     "raw": "536.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.41,
     "max": 3.41,
     "quality": "reported",
     "raw": "3.41",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-06-14",
     "quality": "reported",
     "raw": "6/14/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/93",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "149F001",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 93,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.98,
     "max": 26.98,
     "quality": "reported",
     "raw": "300.13",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-093_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.13",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-093_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8.3,
     "max": 8.3,
     "quality": "reported",
     "raw": "8.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.71,
     "max": 0.71,
     "quality": "reported",
     "raw": "0.71",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. There is a lot of transverse and axial oscillatory motion during the entire droplet burn. The droplet does not leave the HiBMS FOV during the test, but the burning rate is high which is likely the result of the significant and high frequency oscillations.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. There is a lot of transverse and axial oscillatory motion during the entire droplet burn. The droplet does not leave the HiBMS FOV during the test, but the burning rate is high which is likely the result of the significant and high frequency oscillations.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-093_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. There is a lot of transverse and axial oscillatory motion during the entire droplet burn. The droplet does not leave the HiBMS FOV during the test, but the burning rate is high which is likely the result of the significant and high frequency oscillations.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-093_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-093_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-093_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.6,
     "max": 0.6,
     "quality": "reported",
     "raw": "0.6",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.6341,
     "max": 71.6341,
     "quality": "reported",
     "raw": "537.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.48,
     "max": 2.48,
     "quality": "reported",
     "raw": "2.48",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-06-15",
     "quality": "reported",
     "raw": "6/15/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/94",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C08H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 94,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.93,
     "max": 26.93,
     "quality": "reported",
     "raw": "300.08",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-094_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.08",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-094_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 10.1,
     "max": 10.1,
     "quality": "reported",
     "raw": "10.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.51,
     "max": 0.51,
     "quality": "reported",
     "raw": "0.51",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.27/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N after deployment and ignition and out of the HiBMS FOV shortly after visible flame extinction. Some time after visible flame extinction there is a large vapor cloud of (presumable) formed. This is indicative of cool flame burning and extinction following visible flame extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.27/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N after deployment and ignition and out of the HiBMS FOV shortly after visible flame extinction. Some time after visible flame extinction there is a large vapor cloud of (presumable) formed. This is indicative of cool flame burning and extinction following visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-094_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.27/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N after deployment and ignition and out of the HiBMS FOV shortly after visible flame extinction. Some time after visible flame extinction there is a large vapor cloud of (presumable) formed. This is indicative of cool flame burning and extinction following visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-094_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.76,
     "max": 2.76,
     "quality": "reported",
     "raw": "2.76",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-094_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-094_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.24,
     "max": 0.24,
     "quality": "reported",
     "raw": "0.24",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.1408,
     "max": 71.1408,
     "quality": "reported",
     "raw": "533.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.53,
     "max": 3.53,
     "quality": "reported",
     "raw": "3.53",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-06-15",
     "quality": "reported",
     "raw": "6/15/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/95",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C08H201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 95,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.12,
     "max": 27.12,
     "quality": "reported",
     "raw": "300.27",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-095_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.27",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-095_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.58,
     "max": 0.58,
     "quality": "reported",
     "raw": "0.58",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet with 3 mm/sec translation (for approximately 4 seconds) burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. There is very little axial or transverse oscillation on the fiber and the droplet stays within the HiBMS FOV for the entire test. The visible flame extinguishes shortly after the fiber translation stops. The droplet continues to vaporize at a relatively high rate after visible flame extinction and then there is some axial oscillation on the fiber, followed by a significant reduction in the vaporization rate. The marked decrease in vaporization is coincident with a large vapor cloud formation with a torroidal vapor cloud in the immediate vicinity of the droplet. This is indicative of cool flame burning and extinction following visible flame extinction.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet with 3 mm/sec translation (for approximately 4 seconds) burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. There is very little axial or transverse oscillation on the fiber and the droplet stays within the HiBMS FOV for the entire test. The visible flame extinguishes shortly after the fiber translation stops. The droplet continues to vaporize at a relatively high rate after visible flame extinction and then there is some axial oscillation on the fiber, followed by a significant reduction in the vaporization rate. The marked decrease in vaporization is coincident with a large vapor cloud formation with a torroidal vapor cloud in the immediate vicinity of the droplet. This is indicative of cool flame burning and extinction following visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-095_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet with 3 mm/sec translation (for approximately 4 seconds) burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. There is very little axial or transverse oscillation on the fiber and the droplet stays within the HiBMS FOV for the entire test. The visible flame extinguishes shortly after the fiber translation stops. The droplet continues to vaporize at a relatively high rate after visible flame extinction and then there is some axial oscillation on the fiber, followed by a significant reduction in the vaporization rate. The marked decrease in vaporization is coincident with a large vapor cloud formation with a torroidal vapor cloud in the immediate vicinity of the droplet. This is indicative of cool flame burning and extinction following visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-095_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.04,
     "max": 3.04,
     "quality": "reported",
     "raw": "3.04",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-095_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-095_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.24,
     "max": 0.24,
     "quality": "reported",
     "raw": "0.24",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.2475,
     "max": 71.2475,
     "quality": "reported",
     "raw": "534.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.6,
     "max": 3.6,
     "quality": "reported",
     "raw": "3.6",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-06-15",
     "quality": "reported",
     "raw": "6/15/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/96",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C08H301",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 96,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.26,
     "max": 27.26,
     "quality": "reported",
     "raw": "300.41",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-096_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.41",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-096_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 5.2,
     "max": 5.2,
     "quality": "reported",
     "raw": "5.2",
     "column": "Burn time; s"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. The HiBMS IPSU did not record any images for this test. There were significant oscillations on fiber, so severe that the droplet became dislodged from the fiber and drifted S and out of the color camera FOV. It also drifted out of the LLUV FOV.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. The HiBMS IPSU did not record any images for this test. There were significant oscillations on fiber, so severe that the droplet became dislodged from the fiber and drifted S and out of the color camera FOV. It also drifted out of the LLUV FOV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-096_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. The HiBMS IPSU did not record any images for this test. There were significant oscillations on fiber, so severe that the droplet became dislodged from the fiber and drifted S and out of the color camera FOV. It also drifted out of the LLUV FOV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-096_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-096_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-096_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.24,
     "max": 0.24,
     "quality": "reported",
     "raw": "0.24",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.2475,
     "max": 71.2475,
     "quality": "reported",
     "raw": "534.4",
     "column": "Ambient pressure; mmHg"
    },
    "test_date": {
     "text": "2010-06-15",
     "quality": "reported",
     "raw": "6/15/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/97",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C08M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 97,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.64,
     "max": 26.64,
     "quality": "reported",
     "raw": "299.79",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-097_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.79",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-097_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 26.5,
     "max": 26.5,
     "quality": "reported",
     "raw": "26.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N with a relatively high velocity in the HiBMS FOV after deployment and ignition, and out of the FOV shortly after ignition. It appears that the droplet drifts close enough to the needle to start a needle fire that changes the droplet direction from N to E in the color camera FOV. The droplet quickly leaves the color camera FOV while still burning. The droplet remains in the LLUV FOV drifting S after deployment and ignition. The needle fire is visible on the LLUV as well and it pushes the droplet N and out of the LLUV FOV before extinction or disruption.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N with a relatively high velocity in the HiBMS FOV after deployment and ignition, and out of the FOV shortly after ignition. It appears that the droplet drifts close enough to the needle to start a needle fire that changes the droplet direction from N to E in the color camera FOV. The droplet quickly leaves the color camera FOV while still burning. The droplet remains in the LLUV FOV drifting S after deployment and ignition. The needle fire is visible on the LLUV as well and it pushes the droplet N and out of the LLUV FOV before extinction or disruption.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-097_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N with a relatively high velocity in the HiBMS FOV after deployment and ignition, and out of the FOV shortly after ignition. It appears that the droplet drifts close enough to the needle to start a needle fire that changes the droplet direction from N to E in the color camera FOV. The droplet quickly leaves the color camera FOV while still burning. The droplet remains in the LLUV FOV drifting S after deployment and ignition. The needle fire is visible on the LLUV as well and it pushes the droplet N and out of the LLUV FOV before extinction or disruption.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-097_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.6,
     "max": 2.6,
     "quality": "reported",
     "raw": "2.6",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-097_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-097_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.23,
     "max": 0.23,
     "quality": "reported",
     "raw": "0.23",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.2208,
     "max": 71.2208,
     "quality": "reported",
     "raw": "534.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 4.25,
     "max": 4.25,
     "quality": "reported",
     "raw": "4.25",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-06-16",
     "quality": "reported",
     "raw": "6/16/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/98",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C09M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 98,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.45,
     "max": 27.45,
     "quality": "reported",
     "raw": "300.60",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-098_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.60",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-098_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 22.9,
     "max": 22.9,
     "quality": "reported",
     "raw": "22.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.47,
     "max": 0.47,
     "quality": "reported",
     "raw": "0.47",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition, to the edge of the FOV, then E and out of HiBMS FOV before end of test. The flame 'swirls' a little before extinction in both LLUV and color camera. The droplet was not in the HiBMS FOV long enough to get an accurate estimate of the extinction droplet diameter.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition, to the edge of the FOV, then E and out of HiBMS FOV before end of test. The flame 'swirls' a little before extinction in both LLUV and color camera. The droplet was not in the HiBMS FOV long enough to get an accurate estimate of the extinction droplet diameter.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-098_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition, to the edge of the FOV, then E and out of HiBMS FOV before end of test. The flame 'swirls' a little before extinction in both LLUV and color camera. The droplet was not in the HiBMS FOV long enough to get an accurate estimate of the extinction droplet diameter.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-098_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.74,
     "max": 1.74,
     "quality": "reported",
     "raw": "1.74",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-098_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-098_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.23,
     "max": 0.23,
     "quality": "reported",
     "raw": "0.23",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.6075,
     "max": 71.6075,
     "quality": "reported",
     "raw": "537.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.64,
     "max": 3.64,
     "quality": "reported",
     "raw": "3.64",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-06-21",
     "quality": "reported",
     "raw": "6/21/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/99",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C09M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 99,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.85,
     "max": 26.85,
     "quality": "reported",
     "raw": "300.00",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-099_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.00",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-099_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 33,
     "max": 33,
     "quality": "reported",
     "raw": "33",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.42,
     "max": 0.42,
     "quality": "reported",
     "raw": "0.42",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N and out of the HiBMS FOV after deployment and ignition The droplet appears to drift close to the needle (no fire) in the color camera view and gets pushed away slightly. It remains in both the LLUV and color camera FOVs until flame extinction. The droplet is not in the HiBMS FOV long enough to get a good estimate of the extinction droplet diameter.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N and out of the HiBMS FOV after deployment and ignition The droplet appears to drift close to the needle (no fire) in the color camera view and gets pushed away slightly. It remains in both the LLUV and color camera FOVs until flame extinction. The droplet is not in the HiBMS FOV long enough to get a good estimate of the extinction droplet diameter.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-099_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N and out of the HiBMS FOV after deployment and ignition The droplet appears to drift close to the needle (no fire) in the color camera view and gets pushed away slightly. It remains in both the LLUV and color camera FOVs until flame extinction. The droplet is not in the HiBMS FOV long enough to get a good estimate of the extinction droplet diameter.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-099_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.32,
     "max": 2.32,
     "quality": "reported",
     "raw": "2.32",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-099_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-099_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.23,
     "max": 0.23,
     "quality": "reported",
     "raw": "0.23",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.3275,
     "max": 71.3275,
     "quality": "reported",
     "raw": "535",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 4.28,
     "max": 4.28,
     "quality": "reported",
     "raw": "4.28",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-06-21",
     "quality": "reported",
     "raw": "6/21/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/100",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C09H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 100,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.89,
     "max": 25.89,
     "quality": "reported",
     "raw": "299.04",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-100_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.04",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-100_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 6.1,
     "max": 6.1,
     "quality": "reported",
     "raw": "6.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.34,
     "max": 0.34,
     "quality": "reported",
     "raw": "0.34",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N after deployment and ignition, and out of HiBMS FOV just after visible flame extinction. The flame radiatively extinguishes at a relatively large droplet size. There is a vapor cloud formation approximately 15 sec after visible flame extinction. The vapor cloud is indicative of cool flame burning and extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N after deployment and ignition, and out of HiBMS FOV just after visible flame extinction. The flame radiatively extinguishes at a relatively large droplet size. There is a vapor cloud formation approximately 15 sec after visible flame extinction. The vapor cloud is indicative of cool flame burning and extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-100_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N after deployment and ignition, and out of HiBMS FOV just after visible flame extinction. The flame radiatively extinguishes at a relatively large droplet size. There is a vapor cloud formation approximately 15 sec after visible flame extinction. The vapor cloud is indicative of cool flame burning and extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-100_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.98,
     "max": 3.98,
     "quality": "reported",
     "raw": "3.98",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-100_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-100_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.23,
     "max": 0.23,
     "quality": "reported",
     "raw": "0.23",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.5541,
     "max": 71.5541,
     "quality": "reported",
     "raw": "536.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 4.14,
     "max": 4.14,
     "quality": "reported",
     "raw": "4.14",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-06-29",
     "quality": "reported",
     "raw": "6/29/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/101",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C09H201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 101,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.69,
     "max": 26.69,
     "quality": "reported",
     "raw": "299.84",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-101_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.84",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-101_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 6.5,
     "max": 6.5,
     "quality": "reported",
     "raw": "6.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet with 3 mm/sec translation (for approximately 4 seconds) burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. There is only a little axial and transverse oscillation after deployment and ignition and druing translation of the fiber, but for most of the burn and post-burn, the droplet is relatively quiescent. The droplet remains in the HiBMS FOV for the entire recording duration of HiBMS IPSU-1. The flame radiatively extinguishes, preferentially along the fiber axis. The droplet continues to vaporize at a high rate after visible flame extinction. The vaporization then slows considerably and there is a visible vapor cloud formed. This is indicative of cool flame burning and extinction following visible flame extinction.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet with 3 mm/sec translation (for approximately 4 seconds) burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. There is only a little axial and transverse oscillation after deployment and ignition and druing translation of the fiber, but for most of the burn and post-burn, the droplet is relatively quiescent. The droplet remains in the HiBMS FOV for the entire recording duration of HiBMS IPSU-1. The flame radiatively extinguishes, preferentially along the fiber axis. The droplet continues to vaporize at a high rate after visible flame extinction. The vaporization then slows considerably and there is a visible vapor cloud formed. This is indicative of cool flame burning and extinction following visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-101_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet with 3 mm/sec translation (for approximately 4 seconds) burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. There is only a little axial and transverse oscillation after deployment and ignition and druing translation of the fiber, but for most of the burn and post-burn, the droplet is relatively quiescent. The droplet remains in the HiBMS FOV for the entire recording duration of HiBMS IPSU-1. The flame radiatively extinguishes, preferentially along the fiber axis. The droplet continues to vaporize at a high rate after visible flame extinction. The vaporization then slows considerably and there is a visible vapor cloud formed. This is indicative of cool flame burning and extinction following visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-101_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.45,
     "max": 3.45,
     "quality": "reported",
     "raw": "3.45",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-101_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-101_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.23,
     "max": 0.23,
     "quality": "reported",
     "raw": "0.23",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.8208,
     "max": 71.8208,
     "quality": "reported",
     "raw": "538.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.88,
     "max": 3.88,
     "quality": "reported",
     "raw": "3.88",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-06-29",
     "quality": "reported",
     "raw": "6/29/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/102",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C10H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 102,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.24,
     "max": 27.24,
     "quality": "reported",
     "raw": "300.39",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-102_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.39",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-102_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 4.2,
     "max": 4.2,
     "quality": "reported",
     "raw": "4.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.33,
     "max": 0.33,
     "quality": "reported",
     "raw": "0.33",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.21/0.49/0.30 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition and out of the HiBMS FOV shortly after visible flame extinction. The color camera IPSU failed to record any images after droplet deployment. The flame radiatively extinguishes and there is a vapor cloud visible on the downlink video some time after visible flame extinction. This is indicative of cool flame burning and extinction following visible flame extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.21/0.49/0.30 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition and out of the HiBMS FOV shortly after visible flame extinction. The color camera IPSU failed to record any images after droplet deployment. The flame radiatively extinguishes and there is a vapor cloud visible on the downlink video some time after visible flame extinction. This is indicative of cool flame burning and extinction following visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-102_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.21/0.49/0.30 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition and out of the HiBMS FOV shortly after visible flame extinction. The color camera IPSU failed to record any images after droplet deployment. The flame radiatively extinguishes and there is a vapor cloud visible on the downlink video some time after visible flame extinction. This is indicative of cool flame burning and extinction following visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-102_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.43,
     "max": 3.43,
     "quality": "reported",
     "raw": "3.43",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-102_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-102_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.2208,
     "max": 71.2208,
     "quality": "reported",
     "raw": "534.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.57,
     "max": 3.57,
     "quality": "reported",
     "raw": "3.57",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-06-29",
     "quality": "reported",
     "raw": "6/29/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/103",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C10H201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 103,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.44,
     "max": 27.44,
     "quality": "reported",
     "raw": "300.59",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-103_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.59",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-103_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 3.2,
     "max": 3.2,
     "quality": "reported",
     "raw": "3.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.21/0.49/0.30, 0.70 atm ambient environment. The droplet moves axially on the fiber a short distance after translation stops and partially out of the HiBMS FOV. By the end of the HiBMS IPSU-1 recording it moves completely back into the HiBMS FOV. There is a small droplet or debris on the fiber that ignites and briefly burns (burns out) before the flame extinguishes. The flame radiatively extinguishes before translation stops. The droplet continues to vaporize at a relatively high rate and the vaporization rate slows which is coincident with a visible vapor cloud forming. The vapor cloud forms a torroidal ring around the droplet and the background intensity in the HiBMS decreases significantly as the vapor cloud forms. The post visible flame extinction behavior is indicative of cool flame burning and extinction.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.21/0.49/0.30, 0.70 atm ambient environment. The droplet moves axially on the fiber a short distance after translation stops and partially out of the HiBMS FOV. By the end of the HiBMS IPSU-1 recording it moves completely back into the HiBMS FOV. There is a small droplet or debris on the fiber that ignites and briefly burns (burns out) before the flame extinguishes. The flame radiatively extinguishes before translation stops. The droplet continues to vaporize at a relatively high rate and the vaporization rate slows which is coincident with a visible vapor cloud forming. The vapor cloud forms a torroidal ring around the droplet and the background intensity in the HiBMS decreases significantly as the vapor cloud forms. The post visible flame extinction behavior is indicative of cool flame burning and extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-103_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.21/0.49/0.30, 0.70 atm ambient environment. The droplet moves axially on the fiber a short distance after translation stops and partially out of the HiBMS FOV. By the end of the HiBMS IPSU-1 recording it moves completely back into the HiBMS FOV. There is a small droplet or debris on the fiber that ignites and briefly burns (burns out) before the flame extinguishes. The flame radiatively extinguishes before translation stops. The droplet continues to vaporize at a relatively high rate and the vaporization rate slows which is coincident with a visible vapor cloud forming. The vapor cloud forms a torroidal ring around the droplet and the background intensity in the HiBMS decreases significantly as the vapor cloud forms. The post visible flame extinction behavior is indicative of cool flame burning and extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-103_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.88,
     "max": 3.88,
     "quality": "reported",
     "raw": "3.88",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-103_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-103_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.2342,
     "max": 71.2342,
     "quality": "reported",
     "raw": "534.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "4",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-06-29",
     "quality": "reported",
     "raw": "6/29/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/104",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C08M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 104,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.79,
     "max": 26.79,
     "quality": "reported",
     "raw": "299.94",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-104_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.94",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-104_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 23.2,
     "max": 23.2,
     "quality": "reported",
     "raw": "23.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.21/0.49/0.30 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N after deployment and ignition and out of the HiBMS FOV about 1/3rd of the way through the test. The color camera IPSU-4 did not record any images after deployment. The droplet burns to diffusive extinction without disruption. There is no extinction droplet diameter reported since the droplet was within the HiBMS FOV for such a short fraction of the burn time.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.21/0.49/0.30 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N after deployment and ignition and out of the HiBMS FOV about 1/3rd of the way through the test. The color camera IPSU-4 did not record any images after deployment. The droplet burns to diffusive extinction without disruption. There is no extinction droplet diameter reported since the droplet was within the HiBMS FOV for such a short fraction of the burn time.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-104_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.21/0.49/0.30 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N after deployment and ignition and out of the HiBMS FOV about 1/3rd of the way through the test. The color camera IPSU-4 did not record any images after deployment. The droplet burns to diffusive extinction without disruption. There is no extinction droplet diameter reported since the droplet was within the HiBMS FOV for such a short fraction of the burn time.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-104_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.58,
     "max": 1.58,
     "quality": "reported",
     "raw": "1.58",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-104_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-104_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.23,
     "max": 0.23,
     "quality": "reported",
     "raw": "0.23",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.2075,
     "max": 71.2075,
     "quality": "reported",
     "raw": "534.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.6,
     "max": 3.6,
     "quality": "reported",
     "raw": "3.6",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-06-16",
     "quality": "reported",
     "raw": "6/16/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/105",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C08M301",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 105,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.96,
     "max": 26.96,
     "quality": "reported",
     "raw": "300.11",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-105_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.11",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-105_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 30.7,
     "max": 30.7,
     "quality": "reported",
     "raw": "30.7",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.47,
     "max": 0.47,
     "quality": "reported",
     "raw": "0.47",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. There is significant axial oscillatory motion on the fiber after deployment and igntion that persists after fiber translation stops about halfway through the flame lifetime. The droplet then burns without axial or transverse motion until it disrupts and dislocated from the fiber coincident with flame extinction.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. There is significant axial oscillatory motion on the fiber after deployment and igntion that persists after fiber translation stops about halfway through the flame lifetime. The droplet then burns without axial or transverse motion until it disrupts and dislocated from the fiber coincident with flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-105_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. There is significant axial oscillatory motion on the fiber after deployment and igntion that persists after fiber translation stops about halfway through the flame lifetime. The droplet then burns without axial or transverse motion until it disrupts and dislocated from the fiber coincident with flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-105_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2,
     "max": 2,
     "quality": "reported",
     "raw": "2",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-105_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-105_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.23,
     "max": 0.23,
     "quality": "reported",
     "raw": "0.23",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.2742,
     "max": 71.2742,
     "quality": "reported",
     "raw": "534.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 4.17,
     "max": 4.17,
     "quality": "reported",
     "raw": "4.17",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-06-16",
     "quality": "reported",
     "raw": "6/16/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/106",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C09M401",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 106,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.82,
     "max": 27.82,
     "quality": "reported",
     "raw": "300.97",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-106_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.97",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-106_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 14.1,
     "max": 14.1,
     "quality": "reported",
     "raw": "14.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.51,
     "max": 0.51,
     "quality": "reported",
     "raw": "0.51",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet moves W along the fiber a short distance after deployment and ignition but before translation and then moves E with the fiber during translation. The droplet remains within the HiBMS FOV for the entire test. There is very little motion of the droplet relative to the fiber during the test. There is a small disruption coincindent with flame extinction that leaves a slightly smaller droplet on the fiber. The extinction droplet diameter is the droplet diameter just prior to the diruption.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet moves W along the fiber a short distance after deployment and ignition but before translation and then moves E with the fiber during translation. The droplet remains within the HiBMS FOV for the entire test. There is very little motion of the droplet relative to the fiber during the test. There is a small disruption coincindent with flame extinction that leaves a slightly smaller droplet on the fiber. The extinction droplet diameter is the droplet diameter just prior to the diruption.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-106_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet moves W along the fiber a short distance after deployment and ignition but before translation and then moves E with the fiber during translation. The droplet remains within the HiBMS FOV for the entire test. There is very little motion of the droplet relative to the fiber during the test. There is a small disruption coincindent with flame extinction that leaves a slightly smaller droplet on the fiber. The extinction droplet diameter is the droplet diameter just prior to the diruption.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-106_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.75,
     "max": 1.75,
     "quality": "reported",
     "raw": "1.75",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-106_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-106_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.23,
     "max": 0.23,
     "quality": "reported",
     "raw": "0.23",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.7674,
     "max": 71.7674,
     "quality": "reported",
     "raw": "538.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.08,
     "max": 3.08,
     "quality": "reported",
     "raw": "3.08",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-06-21",
     "quality": "reported",
     "raw": "6/21/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/107",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C08M401",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 107,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.07,
     "max": 27.07,
     "quality": "reported",
     "raw": "300.22",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-107_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.22",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-107_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 15.1,
     "max": 15.1,
     "quality": "reported",
     "raw": "15.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. There is not much axial oscillatory motion associated with fiber motion but some transverse oscillations. The droplet disrupts right around the time of extinction. There is no shape change prior to disruption.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. There is not much axial oscillatory motion associated with fiber motion but some transverse oscillations. The droplet disrupts right around the time of extinction. There is no shape change prior to disruption.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-107_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. There is not much axial oscillatory motion associated with fiber motion but some transverse oscillations. The droplet disrupts right around the time of extinction. There is no shape change prior to disruption.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-107_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-107_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-107_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.23,
     "max": 0.23,
     "quality": "reported",
     "raw": "0.23",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.3275,
     "max": 71.3275,
     "quality": "reported",
     "raw": "535",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.18,
     "max": 3.18,
     "quality": "reported",
     "raw": "3.18",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-06-16",
     "quality": "reported",
     "raw": "6/16/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/108",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C09M301",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 108,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.76,
     "max": 27.76,
     "quality": "reported",
     "raw": "300.91",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-108_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.91",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-108_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 24.3,
     "max": 24.3,
     "quality": "reported",
     "raw": "24.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.47,
     "max": 0.47,
     "quality": "reported",
     "raw": "0.47",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. There was significant oscillatory motion of the droplet on the fiber during the burn both before and after the translation. The droplet swells and eventually disrupts before flame extinction leaving a small residual droplet on the fiber.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. There was significant oscillatory motion of the droplet on the fiber during the burn both before and after the translation. The droplet swells and eventually disrupts before flame extinction leaving a small residual droplet on the fiber.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-108_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. There was significant oscillatory motion of the droplet on the fiber during the burn both before and after the translation. The droplet swells and eventually disrupts before flame extinction leaving a small residual droplet on the fiber.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-108_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-108_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-108_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.23,
     "max": 0.23,
     "quality": "reported",
     "raw": "0.23",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.7674,
     "max": 71.7674,
     "quality": "reported",
     "raw": "538.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.75,
     "max": 3.75,
     "quality": "reported",
     "raw": "3.75",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-06-21",
     "quality": "reported",
     "raw": "6/21/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/109",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C10M102",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 109,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.52,
     "max": 27.52,
     "quality": "reported",
     "raw": "300.67",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-109_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.67",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-109_TestSheet.txt"
    },
    "burning_rate_mm2_s": {
     "min": 0.42,
     "max": 0.42,
     "quality": "reported",
     "raw": "0.42",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning inb a 0.21/0.49/0.30 O2/N2/CO2, 0.70 atm ambient environment. The droplet stays in the HiBMS and color camera FOVs for the entire IPSU recording time (evan after visible flame extinction). The LLUV IPSU did not record any images for this test. The droplet deforms (becomes aspherical) right around extinction and remains mishapen after the flame extinguishes. There may be fuel contamination issues with this test.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning inb a 0.21/0.49/0.30 O2/N2/CO2, 0.70 atm ambient environment. The droplet stays in the HiBMS and color camera FOVs for the entire IPSU recording time (evan after visible flame extinction). The LLUV IPSU did not record any images for this test. The droplet deforms (becomes aspherical) right around extinction and remains mishapen after the flame extinguishes. There may be fuel contamination issues with this test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-109_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning inb a 0.21/0.49/0.30 O2/N2/CO2, 0.70 atm ambient environment. The droplet stays in the HiBMS and color camera FOVs for the entire IPSU recording time (evan after visible flame extinction). The LLUV IPSU did not record any images for this test. The droplet deforms (becomes aspherical) right around extinction and remains mishapen after the flame extinguishes. There may be fuel contamination issues with this test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-109_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.92,
     "max": 1.92,
     "quality": "reported",
     "raw": "1.92",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-109_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-109_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.5275,
     "max": 71.5275,
     "quality": "reported",
     "raw": "536.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.56,
     "max": 3.56,
     "quality": "reported",
     "raw": "3.56",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-08-31",
     "quality": "reported",
     "raw": "8/31/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/110",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C10M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 110,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.62,
     "max": 27.62,
     "quality": "reported",
     "raw": "300.77",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-110_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.77",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-110_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 13,
     "max": 13,
     "quality": "reported",
     "raw": "13",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.21/0.49/0.30 O2/N2/CO2, 0.70 atm ambient environment. The droplet remains within the FOV of all cameras and burns to diffusive extinction. The LLUV data has a lot of noise associated with the very dim flame and the smudge on the CIR LLUV viewing window.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.21/0.49/0.30 O2/N2/CO2, 0.70 atm ambient environment. The droplet remains within the FOV of all cameras and burns to diffusive extinction. The LLUV data has a lot of noise associated with the very dim flame and the smudge on the CIR LLUV viewing window.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-110_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.21/0.49/0.30 O2/N2/CO2, 0.70 atm ambient environment. The droplet remains within the FOV of all cameras and burns to diffusive extinction. The LLUV data has a lot of noise associated with the very dim flame and the smudge on the CIR LLUV viewing window.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-110_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.57,
     "max": 1.57,
     "quality": "reported",
     "raw": "1.57",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-110_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-110_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.5941,
     "max": 71.5941,
     "quality": "reported",
     "raw": "537",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.83,
     "max": 2.83,
     "quality": "reported",
     "raw": "2.83",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-08-31",
     "quality": "reported",
     "raw": "8/31/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/111",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C10M303",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 111,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.73,
     "max": 27.73,
     "quality": "reported",
     "raw": "300.88",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-111_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.88",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-111_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 16.4,
     "max": 16.4,
     "quality": "reported",
     "raw": "16.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet burning in a 0.21/0.49/0.30 O2/N2/CO2, 0.70 atm ambient environment with fiber translation after ignition. An almost ideal fiber supported test with almost no oscillation of the droplet. The fiber started and stopped moving with almost no relative motion imparted to the droplet.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet burning in a 0.21/0.49/0.30 O2/N2/CO2, 0.70 atm ambient environment with fiber translation after ignition. An almost ideal fiber supported test with almost no oscillation of the droplet. The fiber started and stopped moving with almost no relative motion imparted to the droplet.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-111_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet burning in a 0.21/0.49/0.30 O2/N2/CO2, 0.70 atm ambient environment with fiber translation after ignition. An almost ideal fiber supported test with almost no oscillation of the droplet. The fiber started and stopped moving with almost no relative motion imparted to the droplet.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-111_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.1,
     "max": 2.1,
     "quality": "reported",
     "raw": "2.1",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-111_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-111_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.5808,
     "max": 71.5808,
     "quality": "reported",
     "raw": "536.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.37,
     "max": 3.37,
     "quality": "reported",
     "raw": "3.37",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-08-31",
     "quality": "reported",
     "raw": "8/31/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/112",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C10M401",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 112,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 24.54,
     "max": 24.54,
     "quality": "reported",
     "raw": "297.69",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-112_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 297.69",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-112_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 25.2,
     "max": 25.2,
     "quality": "reported",
     "raw": "25.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.43,
     "max": 0.43,
     "quality": "reported",
     "raw": "0.43",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fber-supported methanol droplet burning in a 0.21/0.49/0.30 O2/N2/CO2, 0.70 atm ambient environment. There was no fiber translation on this test. The droplet initially moves W in the HiBMS FOV before stopping and then slowly moving back to the center of the image. There is a little disruption (maybe a small gas bubble popping) near flame extinction that is coincident with a small sattelite droplet being ejected from the droplet.",
     "quality": "reported",
     "raw": "Fber-supported methanol droplet burning in a 0.21/0.49/0.30 O2/N2/CO2, 0.70 atm ambient environment. There was no fiber translation on this test. The droplet initially moves W in the HiBMS FOV before stopping and then slowly moving back to the center of the image. There is a little disruption (maybe a small gas bubble popping) near flame extinction that is coincident with a small sattelite droplet being ejected from the droplet.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-112_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fber-supported methanol droplet burning in a 0.21/0.49/0.30 O2/N2/CO2, 0.70 atm ambient environment. There was no fiber translation on this test. The droplet initially moves W in the HiBMS FOV before stopping and then slowly moving back to the center of the image. There is a little disruption (maybe a small gas bubble popping) near flame extinction that is coincident with a small sattelite droplet being ejected from the droplet.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-112_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.35,
     "max": 2.35,
     "quality": "reported",
     "raw": "2.35",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-112_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-112_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.7542,
     "max": 70.7542,
     "quality": "reported",
     "raw": "530.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.99,
     "max": 3.99,
     "quality": "reported",
     "raw": "3.99",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-09-01",
     "quality": "reported",
     "raw": "9/1/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/113",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C11M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 113,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.81,
     "max": 26.81,
     "quality": "reported",
     "raw": "299.96",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-113_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.96",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-113_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 18.2,
     "max": 18.2,
     "quality": "reported",
     "raw": "18.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.20/0.45/0.35 O2/N2/CO2, 0.70 atm ambient enviornment. The droplet drifts NW after deployment in the HiBMS FOV, hits the igniter and then drifts SE after ignition and out of the FOV approximately 8 sec after igniter withdraw. The droplet burns with a very weak relatively steady flame for a long period of time before oscillating before extinction. The extinction droplet diameter is based on extrapolating the droplet history to the time of extinction using the measured burning rate constant from just before when the droplet leaves the HiBMS FOV.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.20/0.45/0.35 O2/N2/CO2, 0.70 atm ambient enviornment. The droplet drifts NW after deployment in the HiBMS FOV, hits the igniter and then drifts SE after ignition and out of the FOV approximately 8 sec after igniter withdraw. The droplet burns with a very weak relatively steady flame for a long period of time before oscillating before extinction. The extinction droplet diameter is based on extrapolating the droplet history to the time of extinction using the measured burning rate constant from just before when the droplet leaves the HiBMS FOV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-113_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.20/0.45/0.35 O2/N2/CO2, 0.70 atm ambient enviornment. The droplet drifts NW after deployment in the HiBMS FOV, hits the igniter and then drifts SE after ignition and out of the FOV approximately 8 sec after igniter withdraw. The droplet burns with a very weak relatively steady flame for a long period of time before oscillating before extinction. The extinction droplet diameter is based on extrapolating the droplet history to the time of extinction using the measured burning rate constant from just before when the droplet leaves the HiBMS FOV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-113_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.85,
     "max": 2.85,
     "quality": "reported",
     "raw": "2.85",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-113_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-113_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.2742,
     "max": 71.2742,
     "quality": "reported",
     "raw": "534.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 4.2,
     "max": 4.2,
     "quality": "reported",
     "raw": "4.2",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-09-01",
     "quality": "reported",
     "raw": "9/1/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/114",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C11M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 114,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": -273.15,
     "max": -273.15,
     "quality": "reported",
     "raw": "0.00",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-114_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 0.00",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-114_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 18.9,
     "max": 18.9,
     "quality": "reported",
     "raw": "18.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.42,
     "max": 0.42,
     "quality": "reported",
     "raw": "0.42",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.20/0.45/0.35 O2/N2/CO2, 0.70 atm ambient environment. After ignition the droplet drifts NE and out of the HiBMS FOV. The droplet remains out of the FOV until near the end of the test when it drifts back in from the NE corner. The droplet drifts back in the FOV just before flame extinction.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.20/0.45/0.35 O2/N2/CO2, 0.70 atm ambient environment. After ignition the droplet drifts NE and out of the HiBMS FOV. The droplet remains out of the FOV until near the end of the test when it drifts back in from the NE corner. The droplet drifts back in the FOV just before flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-114_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.20/0.45/0.35 O2/N2/CO2, 0.70 atm ambient environment. After ignition the droplet drifts NE and out of the HiBMS FOV. The droplet remains out of the FOV until near the end of the test when it drifts back in from the NE corner. The droplet drifts back in the FOV just before flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-114_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.68,
     "max": 1.68,
     "quality": "reported",
     "raw": "1.68",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-114_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-114_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 0,
     "max": 0,
     "outside_expected_range": true,
     "quality": "reported",
     "raw": "0",
     "column": "Ambient pressure; mmHg",
     "note": "Outside the expected range; kept exactly as published."
    },
    "size_mm": {
     "min": 3.23,
     "max": 3.23,
     "quality": "reported",
     "raw": "3.23",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-09-06",
     "quality": "reported",
     "raw": "9/6/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/115",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C11M301",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 115,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.29,
     "max": 27.29,
     "quality": "reported",
     "raw": "300.44",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-115_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.44",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-115_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 22.9,
     "max": 22.9,
     "quality": "reported",
     "raw": "22.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.41,
     "max": 0.41,
     "quality": "reported",
     "raw": "0.41",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.20/0.45/0.35 O2/N2/CO2, 0.70 atm ambient environment. There is a small residue on the fiber to the W of the droplet that ignites a few sec after droplet ignition. This residue burns for 1 - 2 sec with a very bright luminous flame (during translation). The droplet drifts partially out of the HiBMS FOV after the translation stops, then shrinks back to be completely in the FOV. There appears to be some oscillations near extinction. The droplet burns without transverse or axial oscillations along the fiber. There is no disruption or droplet deformation.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.20/0.45/0.35 O2/N2/CO2, 0.70 atm ambient environment. There is a small residue on the fiber to the W of the droplet that ignites a few sec after droplet ignition. This residue burns for 1 - 2 sec with a very bright luminous flame (during translation). The droplet drifts partially out of the HiBMS FOV after the translation stops, then shrinks back to be completely in the FOV. There appears to be some oscillations near extinction. The droplet burns without transverse or axial oscillations along the fiber. There is no disruption or droplet deformation.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-115_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet with 3 mm/sec translation burning in a 0.20/0.45/0.35 O2/N2/CO2, 0.70 atm ambient environment. There is a small residue on the fiber to the W of the droplet that ignites a few sec after droplet ignition. This residue burns for 1 - 2 sec with a very bright luminous flame (during translation). The droplet drifts partially out of the HiBMS FOV after the translation stops, then shrinks back to be completely in the FOV. There appears to be some oscillations near extinction. The droplet burns without transverse or axial oscillations along the fiber. There is no disruption or droplet deformation.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-115_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.61,
     "max": 2.61,
     "quality": "reported",
     "raw": "2.61",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-115_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-115_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.4341,
     "max": 71.4341,
     "quality": "reported",
     "raw": "535.8",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.97,
     "max": 3.97,
     "quality": "reported",
     "raw": "3.97",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-09-01",
     "quality": "reported",
     "raw": "9/1/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/116",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C11M401",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 116,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.34,
     "max": 27.34,
     "quality": "reported",
     "raw": "300.49",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-116_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.49",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-116_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 16.9,
     "max": 16.9,
     "quality": "reported",
     "raw": "16.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.46,
     "max": 0.46,
     "quality": "reported",
     "raw": "0.46",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet (translated for approximately 3 sec. immediately after ignition) burning in a 0.20/0.45/0.35 O2/N2/CO2, 0.70 atm ambient environment. This was a very clean test with very little droplet motion on the fiber.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet (translated for approximately 3 sec. immediately after ignition) burning in a 0.20/0.45/0.35 O2/N2/CO2, 0.70 atm ambient environment. This was a very clean test with very little droplet motion on the fiber.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-116_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet (translated for approximately 3 sec. immediately after ignition) burning in a 0.20/0.45/0.35 O2/N2/CO2, 0.70 atm ambient environment. This was a very clean test with very little droplet motion on the fiber.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-116_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.57,
     "max": 1.57,
     "quality": "reported",
     "raw": "1.57",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-116_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-116_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.5008,
     "max": 71.5008,
     "quality": "reported",
     "raw": "536.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.16,
     "max": 3.16,
     "quality": "reported",
     "raw": "3.16",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-09-01",
     "quality": "reported",
     "raw": "9/1/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/117",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C11H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 117,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.53,
     "max": 25.53,
     "quality": "reported",
     "raw": "298.68",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-117_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.68",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-117_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 2.4,
     "max": 2.4,
     "quality": "reported",
     "raw": "2.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.20/0.45/0.35 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition and out of the FOV after visible flame extinction. The droplet has a very low burning rate constant. A relatively large vapor cloud forms well after visible flame extinction which indicates likely cool flame burning and extinction after visible flame extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.20/0.45/0.35 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition and out of the FOV after visible flame extinction. The droplet has a very low burning rate constant. A relatively large vapor cloud forms well after visible flame extinction which indicates likely cool flame burning and extinction after visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-117_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.20/0.45/0.35 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition and out of the FOV after visible flame extinction. The droplet has a very low burning rate constant. A relatively large vapor cloud forms well after visible flame extinction which indicates likely cool flame burning and extinction after visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-117_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.77,
     "max": 3.77,
     "quality": "reported",
     "raw": "3.77",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-117_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-117_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.8075,
     "max": 70.8075,
     "quality": "reported",
     "raw": "531.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.84,
     "max": 3.84,
     "quality": "reported",
     "raw": "3.84",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-09-06",
     "quality": "reported",
     "raw": "9/6/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/118",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C11H201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 118,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.35,
     "max": 26.35,
     "quality": "reported",
     "raw": "299.50",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-118_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.50",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-118_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.38,
     "max": 0.38,
     "quality": "reported",
     "raw": "0.38",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet burning in a 0.20/0.45/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet ignites and shortly after ignition a small droplet or debris ignites to the W (color camera) or N (LLUV) of the droplet. This small droplet/particle burns for only a short time. It is not visible in the HiBMS. The droplet burns for only a short time before radiatively extinguishing. There is continued rapid vaporization after visible flame exinction, followed by avapor cloud formation approximately 5 seconds after visible flame extinction. This is an indication of cool flame burning and extinction following visible flame extinction.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet burning in a 0.20/0.45/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet ignites and shortly after ignition a small droplet or debris ignites to the W (color camera) or N (LLUV) of the droplet. This small droplet/particle burns for only a short time. It is not visible in the HiBMS. The droplet burns for only a short time before radiatively extinguishing. There is continued rapid vaporization after visible flame exinction, followed by avapor cloud formation approximately 5 seconds after visible flame extinction. This is an indication of cool flame burning and extinction following visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-118_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet burning in a 0.20/0.45/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet ignites and shortly after ignition a small droplet or debris ignites to the W (color camera) or N (LLUV) of the droplet. This small droplet/particle burns for only a short time. It is not visible in the HiBMS. The droplet burns for only a short time before radiatively extinguishing. There is continued rapid vaporization after visible flame exinction, followed by avapor cloud formation approximately 5 seconds after visible flame extinction. This is an indication of cool flame burning and extinction following visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-118_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.93,
     "max": 2.93,
     "quality": "reported",
     "raw": "2.93",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-118_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-118_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.44,
     "max": 0.44,
     "quality": "reported",
     "raw": "0.44",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.0342,
     "max": 71.0342,
     "quality": "reported",
     "raw": "532.8",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.03,
     "max": 3.03,
     "quality": "reported",
     "raw": "3.03",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-09-06",
     "quality": "reported",
     "raw": "9/6/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/119",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C12H103",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 119,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.38,
     "max": 27.38,
     "quality": "reported",
     "raw": "300.53",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-119_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.53",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-119_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 1.3,
     "max": 1.3,
     "quality": "reported",
     "raw": "1.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.37,
     "max": 0.37,
     "quality": "reported",
     "raw": "0.37",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet burning in a 0.18/0.42/0.40 O2/N2/CO2, 0.70 atm ambient environment. After ignition the flame quickly extinguishes. This is likely radiative extinction and it is quite possible this ambient condition is below the flammability limit for heptane. The droplet has some unusual oscillations on the fiber during the burn that seem to disappear for most of the test (after the flame extinguishes). The color camera IPSU did not record any images for this test. There is a brief period of significant vaporization after visible flame extinction followed by formation of a small vapor cloud. This is indicative of cool flame burning and extinction following visible flame extinction.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet burning in a 0.18/0.42/0.40 O2/N2/CO2, 0.70 atm ambient environment. After ignition the flame quickly extinguishes. This is likely radiative extinction and it is quite possible this ambient condition is below the flammability limit for heptane. The droplet has some unusual oscillations on the fiber during the burn that seem to disappear for most of the test (after the flame extinguishes). The color camera IPSU did not record any images for this test. There is a brief period of significant vaporization after visible flame extinction followed by formation of a small vapor cloud. This is indicative of cool flame burning and extinction following visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-119_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet burning in a 0.18/0.42/0.40 O2/N2/CO2, 0.70 atm ambient environment. After ignition the flame quickly extinguishes. This is likely radiative extinction and it is quite possible this ambient condition is below the flammability limit for heptane. The droplet has some unusual oscillations on the fiber during the burn that seem to disappear for most of the test (after the flame extinguishes). The color camera IPSU did not record any images for this test. There is a brief period of significant vaporization after visible flame extinction followed by formation of a small vapor cloud. This is indicative of cool flame burning and extinction following visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-119_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.48,
     "max": 2.48,
     "quality": "reported",
     "raw": "2.48",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-119_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-119_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.42,
     "max": 0.42,
     "quality": "reported",
     "raw": "0.42",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.0075,
     "max": 71.0075,
     "quality": "reported",
     "raw": "532.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.6,
     "max": 2.6,
     "quality": "reported",
     "raw": "2.6",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-09-07",
     "quality": "reported",
     "raw": "9/7/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/120",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C12H201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 120,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.24,
     "max": 27.24,
     "quality": "reported",
     "raw": "300.39",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-120_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.39",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-120_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 1.43,
     "max": 1.43,
     "quality": "reported",
     "raw": "1.43",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.38,
     "max": 0.38,
     "quality": "reported",
     "raw": "0.38",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet with fiber translation burning in a 0.18/0.42/0.40 O2/N2/CO2, 0.70 atm ambient environment. The droplet does not oscillate much on the fiber during or after the burn. There is s small vapor cloud formed after visible flame extinction. It is difficult to determine whether there was cool flame burning and extinction from the available data. The LLUV IPSU did not record any images during the burn.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet with fiber translation burning in a 0.18/0.42/0.40 O2/N2/CO2, 0.70 atm ambient environment. The droplet does not oscillate much on the fiber during or after the burn. There is s small vapor cloud formed after visible flame extinction. It is difficult to determine whether there was cool flame burning and extinction from the available data. The LLUV IPSU did not record any images during the burn.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-120_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet with fiber translation burning in a 0.18/0.42/0.40 O2/N2/CO2, 0.70 atm ambient environment. The droplet does not oscillate much on the fiber during or after the burn. There is s small vapor cloud formed after visible flame extinction. It is difficult to determine whether there was cool flame burning and extinction from the available data. The LLUV IPSU did not record any images during the burn.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-120_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.39,
     "max": 2.39,
     "quality": "reported",
     "raw": "2.39",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-120_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-120_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.42,
     "max": 0.42,
     "quality": "reported",
     "raw": "0.42",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.9942,
     "max": 70.9942,
     "quality": "reported",
     "raw": "532.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.45,
     "max": 2.45,
     "quality": "reported",
     "raw": "2.45",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-09-07",
     "quality": "reported",
     "raw": "9/7/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/121",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C12M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 121,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 24.24,
     "max": 24.24,
     "quality": "reported",
     "raw": "297.39",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-121_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 297.39",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-121_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.34,
     "max": 0.34,
     "quality": "reported",
     "raw": "0.34",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.18/0.42/0.40 O2/N2/CO2, 0.70 atm ambient environment. The droplet does not drift at all in any of the camera FOVs after deployment and ignition. The flame oscillates a few times before radiatively extinguishing. The color camera flame data is more reliable in this test as it was easier to distinguish the flame boundaries.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.18/0.42/0.40 O2/N2/CO2, 0.70 atm ambient environment. The droplet does not drift at all in any of the camera FOVs after deployment and ignition. The flame oscillates a few times before radiatively extinguishing. The color camera flame data is more reliable in this test as it was easier to distinguish the flame boundaries.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-121_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.18/0.42/0.40 O2/N2/CO2, 0.70 atm ambient environment. The droplet does not drift at all in any of the camera FOVs after deployment and ignition. The flame oscillates a few times before radiatively extinguishing. The color camera flame data is more reliable in this test as it was easier to distinguish the flame boundaries.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-121_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.92,
     "max": 3.92,
     "quality": "reported",
     "raw": "3.92",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-121_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-121_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.42,
     "max": 0.42,
     "quality": "reported",
     "raw": "0.42",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.1676,
     "max": 70.1676,
     "quality": "reported",
     "raw": "526.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 4.25,
     "max": 4.25,
     "quality": "reported",
     "raw": "4.25",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-09-08",
     "quality": "reported",
     "raw": "9/8/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/122",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C12M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 122,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.61,
     "max": 26.61,
     "quality": "reported",
     "raw": "299.76",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-122_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.76",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-122_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 13.9,
     "max": 13.9,
     "quality": "reported",
     "raw": "13.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.41,
     "max": 0.41,
     "quality": "reported",
     "raw": "0.41",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.18/0.42/0.40 O2/N2/CO2, 0.7 atm ambient environment. The droplet is almost motionless after deployment and ignition. It then slowly drifts S and eventually out of the HiBMS FOV, but after flame extinction. The flame appears to radially oscillate (primarily in intensity) a few seconds before extinction. The droplet burns for about 15 sec and the flame appears weak but persists for quite a while. Nice clean burn with no distortion or disruption.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.18/0.42/0.40 O2/N2/CO2, 0.7 atm ambient environment. The droplet is almost motionless after deployment and ignition. It then slowly drifts S and eventually out of the HiBMS FOV, but after flame extinction. The flame appears to radially oscillate (primarily in intensity) a few seconds before extinction. The droplet burns for about 15 sec and the flame appears weak but persists for quite a while. Nice clean burn with no distortion or disruption.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-122_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.18/0.42/0.40 O2/N2/CO2, 0.7 atm ambient environment. The droplet is almost motionless after deployment and ignition. It then slowly drifts S and eventually out of the HiBMS FOV, but after flame extinction. The flame appears to radially oscillate (primarily in intensity) a few seconds before extinction. The droplet burns for about 15 sec and the flame appears weak but persists for quite a while. Nice clean burn with no distortion or disruption.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-122_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.58,
     "max": 2.58,
     "quality": "reported",
     "raw": "2.58",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-122_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-122_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.42,
     "max": 0.42,
     "quality": "reported",
     "raw": "0.42",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.8209,
     "max": 70.8209,
     "quality": "reported",
     "raw": "531.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.46,
     "max": 3.46,
     "quality": "reported",
     "raw": "3.46",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-09-08",
     "quality": "reported",
     "raw": "9/8/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/123",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C12M301",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 123,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.9,
     "max": 26.9,
     "quality": "reported",
     "raw": "300.05",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-123_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.05",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-123_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8.7,
     "max": 8.7,
     "quality": "reported",
     "raw": "8.7",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet burning in a 0.18/0.42/0.40 O2/N2/CO2, 0.70 atm ambient environment. There was no fiber translation. Large droplet appears to radiatively extinguish. The color camera IPSU did not record any images after deployment. The LLUV IPSU lost data for about 5 sec during the test. The LLUV images are very dim and it was almost impossible to detect the edges of the flame. The flame appeared on the LLUV view to be quenched where the flame and fiber met.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet burning in a 0.18/0.42/0.40 O2/N2/CO2, 0.70 atm ambient environment. There was no fiber translation. Large droplet appears to radiatively extinguish. The color camera IPSU did not record any images after deployment. The LLUV IPSU lost data for about 5 sec during the test. The LLUV images are very dim and it was almost impossible to detect the edges of the flame. The flame appeared on the LLUV view to be quenched where the flame and fiber met.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-123_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet burning in a 0.18/0.42/0.40 O2/N2/CO2, 0.70 atm ambient environment. There was no fiber translation. Large droplet appears to radiatively extinguish. The color camera IPSU did not record any images after deployment. The LLUV IPSU lost data for about 5 sec during the test. The LLUV images are very dim and it was almost impossible to detect the edges of the flame. The flame appeared on the LLUV view to be quenched where the flame and fiber met.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-123_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.79,
     "max": 3.79,
     "quality": "reported",
     "raw": "3.79",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-123_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-123_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.42,
     "max": 0.42,
     "quality": "reported",
     "raw": "0.42",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.9275,
     "max": 70.9275,
     "quality": "reported",
     "raw": "532",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 4.13,
     "max": 4.13,
     "quality": "reported",
     "raw": "4.13",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-09-08",
     "quality": "reported",
     "raw": "9/8/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/124",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C12M401",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 124,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.08,
     "max": 27.08,
     "quality": "reported",
     "raw": "300.23",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-124_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.23",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-124_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 2.4,
     "max": 2.4,
     "quality": "reported",
     "raw": "2.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.18/0.42/0.40 O2/N2/CO2, 0.70 atm ambient environment. The droplet stays in the FOVs of all that cameras for the entire burn. The droplet burnis for a short time to likely radiative extinction.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.18/0.42/0.40 O2/N2/CO2, 0.70 atm ambient environment. The droplet stays in the FOVs of all that cameras for the entire burn. The droplet burnis for a short time to likely radiative extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-124_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.18/0.42/0.40 O2/N2/CO2, 0.70 atm ambient environment. The droplet stays in the FOVs of all that cameras for the entire burn. The droplet burnis for a short time to likely radiative extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-124_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.74,
     "max": 2.74,
     "quality": "reported",
     "raw": "2.74",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-124_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-124_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.42,
     "max": 0.42,
     "quality": "reported",
     "raw": "0.42",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.9808,
     "max": 70.9808,
     "quality": "reported",
     "raw": "532.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.87,
     "max": 2.87,
     "quality": "reported",
     "raw": "2.87",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-09-08",
     "quality": "reported",
     "raw": "9/8/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/125",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C13M103",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 125,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.61,
     "max": 27.61,
     "quality": "reported",
     "raw": "300.76",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-125_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.76",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-125_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 5.7,
     "max": 5.7,
     "quality": "reported",
     "raw": "5.7",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.17/0.38/0.45 O2/N2/CO2, 0.70 atm ambient evnironment. The droplet stays in the FOV of all cameras after deployment and ignition. The flame oscillates for one or two cycles before radiatively extinguishing. This condition is very near, if not over, the flammability limit. The Color Camera flame size data is a bit more reliable than the LLUV which had a lot of noise and a flame that was barely distinguishable from the background.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.17/0.38/0.45 O2/N2/CO2, 0.70 atm ambient evnironment. The droplet stays in the FOV of all cameras after deployment and ignition. The flame oscillates for one or two cycles before radiatively extinguishing. This condition is very near, if not over, the flammability limit. The Color Camera flame size data is a bit more reliable than the LLUV which had a lot of noise and a flame that was barely distinguishable from the background.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-125_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.17/0.38/0.45 O2/N2/CO2, 0.70 atm ambient evnironment. The droplet stays in the FOV of all cameras after deployment and ignition. The flame oscillates for one or two cycles before radiatively extinguishing. This condition is very near, if not over, the flammability limit. The Color Camera flame size data is a bit more reliable than the LLUV which had a lot of noise and a flame that was barely distinguishable from the background.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-125_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.37,
     "max": 3.37,
     "quality": "reported",
     "raw": "3.37",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-125_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-125_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.38,
     "max": 0.38,
     "quality": "reported",
     "raw": "0.38",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.6208,
     "max": 71.6208,
     "quality": "reported",
     "raw": "537.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.63,
     "max": 3.63,
     "quality": "reported",
     "raw": "3.63",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-09-13",
     "quality": "reported",
     "raw": "9/13/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/126",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C13M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 126,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.98,
     "max": 26.98,
     "quality": "reported",
     "raw": "300.13",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-126_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.13",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-126_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 11.7,
     "max": 11.7,
     "quality": "reported",
     "raw": "11.7",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.17/0.38/0.45 O2/N2/CO2, 0.70 atm ambient environment. The droplet stays within the FOV of all cameras after deployment and ignition. The droplet burns a relatively long time and appears to diffusively extinguish.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.17/0.38/0.45 O2/N2/CO2, 0.70 atm ambient environment. The droplet stays within the FOV of all cameras after deployment and ignition. The droplet burns a relatively long time and appears to diffusively extinguish.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-126_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.17/0.38/0.45 O2/N2/CO2, 0.70 atm ambient environment. The droplet stays within the FOV of all cameras after deployment and ignition. The droplet burns a relatively long time and appears to diffusively extinguish.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-126_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.84,
     "max": 1.84,
     "quality": "reported",
     "raw": "1.84",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-126_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-126_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.38,
     "max": 0.38,
     "quality": "reported",
     "raw": "0.38",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.4741,
     "max": 71.4741,
     "quality": "reported",
     "raw": "536.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.8,
     "max": 2.8,
     "quality": "reported",
     "raw": "2.8",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-09-13",
     "quality": "reported",
     "raw": "9/13/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/127",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C13M301",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 127,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.34,
     "max": 27.34,
     "quality": "reported",
     "raw": "300.49",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-127_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.49",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-127_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 11,
     "max": 11,
     "quality": "reported",
     "raw": "11",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.38,
     "max": 0.38,
     "quality": "reported",
     "raw": "0.38",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol with no translation burning in a 0.17/0.38/0.45 O2/N2/CO2, 0.70 atm ambient environment. The droplet remains within the HiBMS FOV for the entire test. The flame then becomes very dim blue and is nearly cylindrical because of the flame quenching due to the support fiber. There is little fiber glow after the droplet stops translating and from the flame measurements from the color camera, there are periodic oscillations of the flame size after the droplet stops translating. The HiBMS IPSU stopped recording for a relatively large block of time just before igniter withdraw to about halfway through the burn.",
     "quality": "reported",
     "raw": "Fiber-supported methanol with no translation burning in a 0.17/0.38/0.45 O2/N2/CO2, 0.70 atm ambient environment. The droplet remains within the HiBMS FOV for the entire test. The flame then becomes very dim blue and is nearly cylindrical because of the flame quenching due to the support fiber. There is little fiber glow after the droplet stops translating and from the flame measurements from the color camera, there are periodic oscillations of the flame size after the droplet stops translating. The HiBMS IPSU stopped recording for a relatively large block of time just before igniter withdraw to about halfway through the burn.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-127_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol with no translation burning in a 0.17/0.38/0.45 O2/N2/CO2, 0.70 atm ambient environment. The droplet remains within the HiBMS FOV for the entire test. The flame then becomes very dim blue and is nearly cylindrical because of the flame quenching due to the support fiber. There is little fiber glow after the droplet stops translating and from the flame measurements from the color camera, there are periodic oscillations of the flame size after the droplet stops translating. The HiBMS IPSU stopped recording for a relatively large block of time just before igniter withdraw to about halfway through the burn.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-127_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.53,
     "max": 2.53,
     "quality": "reported",
     "raw": "2.53",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-127_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-127_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.38,
     "max": 0.38,
     "quality": "reported",
     "raw": "0.38",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.5541,
     "max": 71.5541,
     "quality": "reported",
     "raw": "536.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.22,
     "max": 3.22,
     "quality": "reported",
     "raw": "3.22",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-09-13",
     "quality": "reported",
     "raw": "9/13/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/128",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C13M401",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 128,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "burn_time_s": {
     "min": 11.5,
     "max": 11.5,
     "quality": "reported",
     "raw": "11.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.39,
     "max": 0.39,
     "quality": "reported",
     "raw": "0.39",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "CO initial ambient composition; mole fraction"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.38,
     "max": 0.38,
     "quality": "reported",
     "raw": "0.38",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.6341,
     "max": 71.6341,
     "quality": "reported",
     "raw": "537.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.91,
     "max": 2.91,
     "quality": "reported",
     "raw": "2.91",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-09-13",
     "quality": "reported",
     "raw": "9/13/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/129",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C13H102",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 129,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.48,
     "max": 27.48,
     "quality": "reported",
     "raw": "300.63",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-129_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.63",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-129_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 0.55,
     "max": 0.55,
     "quality": "reported",
     "raw": "0.55",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.33,
     "max": 0.33,
     "quality": "reported",
     "raw": "0.33",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.17/0.38/0.45 O2/N2/CO2, 0.70 atm ambient environment. The droplet stays in the FOVs of all the cameras for the very short burn and for a considerable period of time after visible flame extinction. The LLUV stopped recording images for several seconds right around ignition. This was a very short burn with no appreciable vaporization or vapor cloud formation after visible flame extinction. There was likely no cool flame or only a very brief cool flame.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.17/0.38/0.45 O2/N2/CO2, 0.70 atm ambient environment. The droplet stays in the FOVs of all the cameras for the very short burn and for a considerable period of time after visible flame extinction. The LLUV stopped recording images for several seconds right around ignition. This was a very short burn with no appreciable vaporization or vapor cloud formation after visible flame extinction. There was likely no cool flame or only a very brief cool flame.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-129_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.17/0.38/0.45 O2/N2/CO2, 0.70 atm ambient environment. The droplet stays in the FOVs of all the cameras for the very short burn and for a considerable period of time after visible flame extinction. The LLUV stopped recording images for several seconds right around ignition. This was a very short burn with no appreciable vaporization or vapor cloud formation after visible flame extinction. There was likely no cool flame or only a very brief cool flame.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-129_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.34,
     "max": 3.34,
     "quality": "reported",
     "raw": "3.34",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-129_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-129_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.38,
     "max": 0.38,
     "quality": "reported",
     "raw": "0.38",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.4875,
     "max": 71.4875,
     "quality": "reported",
     "raw": "536.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.33,
     "max": 3.33,
     "quality": "reported",
     "raw": "3.33",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-09-17",
     "quality": "reported",
     "raw": "9/17/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/130",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C13H201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 130,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.75,
     "max": 27.75,
     "quality": "reported",
     "raw": "300.90",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-130_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.90",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-130_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 0.6,
     "max": 0.6,
     "quality": "reported",
     "raw": "0.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.05,
     "max": 0.05,
     "quality": "reported",
     "raw": "0.05",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.17/0.38/0.45 O2/N2/CO2, 0.7 atm ambient environment. This is a very short burn, radiative extinction with the flame extinguishing very quickly after translation starts. Ther is no vapor cloud formation and the vaporization rate after visible flame extinction is quite small. As a result, there is likely no, or only very brief, cool flame burning.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.17/0.38/0.45 O2/N2/CO2, 0.7 atm ambient environment. This is a very short burn, radiative extinction with the flame extinguishing very quickly after translation starts. Ther is no vapor cloud formation and the vaporization rate after visible flame extinction is quite small. As a result, there is likely no, or only very brief, cool flame burning.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-130_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet with 3 mm/sec translation burning in a 0.17/0.38/0.45 O2/N2/CO2, 0.7 atm ambient environment. This is a very short burn, radiative extinction with the flame extinguishing very quickly after translation starts. Ther is no vapor cloud formation and the vaporization rate after visible flame extinction is quite small. As a result, there is likely no, or only very brief, cool flame burning.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-130_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.89,
     "max": 2.89,
     "quality": "reported",
     "raw": "2.89",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-130_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-130_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.38,
     "max": 0.38,
     "quality": "reported",
     "raw": "0.38",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.6208,
     "max": 71.6208,
     "quality": "reported",
     "raw": "537.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.91,
     "max": 2.91,
     "quality": "reported",
     "raw": "2.91",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-09-17",
     "quality": "reported",
     "raw": "9/17/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/131",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C21H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 131,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.32,
     "max": 26.32,
     "quality": "reported",
     "raw": "299.47",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-131_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.47",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-131_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 4.9,
     "max": 4.9,
     "quality": "reported",
     "raw": "4.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.61,
     "max": 0.61,
     "quality": "reported",
     "raw": "0.61",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. This is a smaller droplet that stays in the FOVs of all the cameras for the entire test. The droplet burns to disruptive extinction at a small size.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. This is a smaller droplet that stays in the FOVs of all the cameras for the entire test. The droplet burns to disruptive extinction at a small size.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-131_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. This is a smaller droplet that stays in the FOVs of all the cameras for the entire test. The droplet burns to disruptive extinction at a small size.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-131_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-131_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-131_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.24,
     "max": 0.24,
     "quality": "reported",
     "raw": "0.24",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.845,
     "max": 101.845,
     "quality": "reported",
     "raw": "763.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.72,
     "max": 1.72,
     "quality": "reported",
     "raw": "1.72",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-10-06",
     "quality": "reported",
     "raw": "10/6/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/132",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C21H201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 132,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.67,
     "max": 26.67,
     "quality": "reported",
     "raw": "299.82",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-132_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.82",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-132_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 12.4,
     "max": 12.4,
     "quality": "reported",
     "raw": "12.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.6,
     "max": 0.6,
     "quality": "reported",
     "raw": "0.6",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts NE after ignition, but slowly and remains in the FOV for the entire test. The droplet is initially luminous with a bight yellow flame that eventually turns blue with a little yellow and then blue until the end of the test. The droplet burns to a small size before a small disruption coincident with flame extinction. The LLUV IPSU-2 stopped recording for about 7 seconds in the middle of the test.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts NE after ignition, but slowly and remains in the FOV for the entire test. The droplet is initially luminous with a bight yellow flame that eventually turns blue with a little yellow and then blue until the end of the test. The droplet burns to a small size before a small disruption coincident with flame extinction. The LLUV IPSU-2 stopped recording for about 7 seconds in the middle of the test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-132_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts NE after ignition, but slowly and remains in the FOV for the entire test. The droplet is initially luminous with a bight yellow flame that eventually turns blue with a little yellow and then blue until the end of the test. The droplet burns to a small size before a small disruption coincident with flame extinction. The LLUV IPSU-2 stopped recording for about 7 seconds in the middle of the test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-132_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.53,
     "max": 0.53,
     "quality": "reported",
     "raw": "0.53",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-132_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-132_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.24,
     "max": 0.24,
     "quality": "reported",
     "raw": "0.24",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.018,
     "max": 102.018,
     "quality": "reported",
     "raw": "765.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.63,
     "max": 2.63,
     "quality": "reported",
     "raw": "2.63",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-10-06",
     "quality": "reported",
     "raw": "10/6/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/133",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C21H301",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 133,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.07,
     "max": 27.07,
     "quality": "reported",
     "raw": "300.22",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-133_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.22",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-133_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 19,
     "max": 19,
     "quality": "reported",
     "raw": "19",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts NW and out of the HiBMS FOV before the end of the test (about half way). After ignition, the droplet flame is luminous, quickly changing to a nearly all blue, dim flame. The flame then begins to oscillate for several seconds before becoming stable and brighter and burning until a small disurption coincident with flame extinction. The extinction droplet diameter is the droplet diameter when the flame disrupts and is estimated from the burning rate constant while the droplet is within the HiBMS FOV and the time of extinction from either the LLUV or color camera views.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts NW and out of the HiBMS FOV before the end of the test (about half way). After ignition, the droplet flame is luminous, quickly changing to a nearly all blue, dim flame. The flame then begins to oscillate for several seconds before becoming stable and brighter and burning until a small disurption coincident with flame extinction. The extinction droplet diameter is the droplet diameter when the flame disrupts and is estimated from the burning rate constant while the droplet is within the HiBMS FOV and the time of extinction from either the LLUV or color camera views.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-133_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts NW and out of the HiBMS FOV before the end of the test (about half way). After ignition, the droplet flame is luminous, quickly changing to a nearly all blue, dim flame. The flame then begins to oscillate for several seconds before becoming stable and brighter and burning until a small disurption coincident with flame extinction. The extinction droplet diameter is the droplet diameter when the flame disrupts and is estimated from the burning rate constant while the droplet is within the HiBMS FOV and the time of extinction from either the LLUV or color camera views.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-133_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.55,
     "max": 0.55,
     "quality": "reported",
     "raw": "0.55",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-133_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-133_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.24,
     "max": 0.24,
     "quality": "reported",
     "raw": "0.24",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.218,
     "max": 102.218,
     "quality": "reported",
     "raw": "766.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.25,
     "max": 3.25,
     "quality": "reported",
     "raw": "3.25",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-10-06",
     "quality": "reported",
     "raw": "10/6/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/134",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C21H401",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 134,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.24,
     "max": 27.24,
     "quality": "reported",
     "raw": "300.39",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-134_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.39",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-134_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 9.2,
     "max": 9.2,
     "quality": "reported",
     "raw": "9.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. There were problems with gas bubbles during the dispense/stretch/deployment. On this test there was a small gas bubble that burst during ignition and caused the droplet to oscillate. The droplet drifts slowly SSE and out of the HiBMS FOV a few seconds after radiative extinction. The droplet continues to vaporize at a relatively high rate after flame extinction although there are only a few seconds before the droplet left the HiBMS FOV. There is a vapor cloud that forms 10 - 20 seconds after visible flame extinction. The post visible flame extinction behavior is indicative of cool flame burning and extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. There were problems with gas bubbles during the dispense/stretch/deployment. On this test there was a small gas bubble that burst during ignition and caused the droplet to oscillate. The droplet drifts slowly SSE and out of the HiBMS FOV a few seconds after radiative extinction. The droplet continues to vaporize at a relatively high rate after flame extinction although there are only a few seconds before the droplet left the HiBMS FOV. There is a vapor cloud that forms 10 - 20 seconds after visible flame extinction. The post visible flame extinction behavior is indicative of cool flame burning and extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-134_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. There were problems with gas bubbles during the dispense/stretch/deployment. On this test there was a small gas bubble that burst during ignition and caused the droplet to oscillate. The droplet drifts slowly SSE and out of the HiBMS FOV a few seconds after radiative extinction. The droplet continues to vaporize at a relatively high rate after flame extinction although there are only a few seconds before the droplet left the HiBMS FOV. There is a vapor cloud that forms 10 - 20 seconds after visible flame extinction. The post visible flame extinction behavior is indicative of cool flame burning and extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-134_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.88,
     "max": 2.88,
     "quality": "reported",
     "raw": "2.88",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-134_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-134_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.24,
     "max": 0.24,
     "quality": "reported",
     "raw": "0.24",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.285,
     "max": 102.285,
     "quality": "reported",
     "raw": "767.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.66,
     "max": 3.66,
     "quality": "reported",
     "raw": "3.66",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-10-06",
     "quality": "reported",
     "raw": "10/6/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/135",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C21H501",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 135,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.46,
     "max": 27.46,
     "quality": "reported",
     "raw": "300.61",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-135_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.61",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-135_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 10.8,
     "max": 10.8,
     "quality": "reported",
     "raw": "10.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet with no translation in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. There is a small droplet to the W of the main droplet that ignited and quickly burned off. There is significant transverse and axial motion of the droplet on the fiber during most of the test. The droplet drifted W on the fiber after deployment, but then stopped and oscillated (irregularly) axially and transversly during the entire burn. There was a brief shape change from spherical at the time of the discrete change in droplet size that corresponded to something being ejected from the droplet (visible on the color camera view).",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet with no translation in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. There is a small droplet to the W of the main droplet that ignited and quickly burned off. There is significant transverse and axial motion of the droplet on the fiber during most of the test. The droplet drifted W on the fiber after deployment, but then stopped and oscillated (irregularly) axially and transversly during the entire burn. There was a brief shape change from spherical at the time of the discrete change in droplet size that corresponded to something being ejected from the droplet (visible on the color camera view).",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-135_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet with no translation in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. There is a small droplet to the W of the main droplet that ignited and quickly burned off. There is significant transverse and axial motion of the droplet on the fiber during most of the test. The droplet drifted W on the fiber after deployment, but then stopped and oscillated (irregularly) axially and transversly during the entire burn. There was a brief shape change from spherical at the time of the discrete change in droplet size that corresponded to something being ejected from the droplet (visible on the color camera view).",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-135_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-135_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-135_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.24,
     "max": 0.24,
     "quality": "reported",
     "raw": "0.24",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.418,
     "max": 102.418,
     "quality": "reported",
     "raw": "768.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.78,
     "max": 2.78,
     "quality": "reported",
     "raw": "2.78",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-10-06",
     "quality": "reported",
     "raw": "10/6/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/136",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C21H302",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 136,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.64,
     "max": 27.64,
     "quality": "reported",
     "raw": "300.79",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-136_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.79",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-136_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 17,
     "max": 17,
     "quality": "reported",
     "raw": "17",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.51,
     "max": 0.51,
     "quality": "reported",
     "raw": "0.51",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts NW in the HiBMS view after deployment, then hits the igniter and moves in the NE direction and out of the HiBMS FOV. There is no extinction droplet diameter reported because the droplet is in the HiBMS FOV for such a small fraction of the droplet lifetime. It is unclear whether the droplet burned to completion of the flame extinguished at a finite droplet size, although given the ambient conditions and expected burning behavior, burnout is more likely.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts NW in the HiBMS view after deployment, then hits the igniter and moves in the NE direction and out of the HiBMS FOV. There is no extinction droplet diameter reported because the droplet is in the HiBMS FOV for such a small fraction of the droplet lifetime. It is unclear whether the droplet burned to completion of the flame extinguished at a finite droplet size, although given the ambient conditions and expected burning behavior, burnout is more likely.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-136_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts NW in the HiBMS view after deployment, then hits the igniter and moves in the NE direction and out of the HiBMS FOV. There is no extinction droplet diameter reported because the droplet is in the HiBMS FOV for such a small fraction of the droplet lifetime. It is unclear whether the droplet burned to completion of the flame extinguished at a finite droplet size, although given the ambient conditions and expected burning behavior, burnout is more likely.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-136_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-136_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-136_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.24,
     "max": 0.24,
     "quality": "reported",
     "raw": "0.24",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.405,
     "max": 102.405,
     "quality": "reported",
     "raw": "768.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.08,
     "max": 3.08,
     "quality": "reported",
     "raw": "3.08",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-10-06",
     "quality": "reported",
     "raw": "10/6/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/137",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C21H303",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 137,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.65,
     "max": 27.65,
     "quality": "reported",
     "raw": "300.80",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-137_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.80",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-137_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 17.5,
     "max": 17.5,
     "quality": "reported",
     "raw": "17.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.55,
     "max": 0.55,
     "quality": "reported",
     "raw": "0.55",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts NW and out of the HiBMS FOV about half way through the test. After deployment, there is a disruption (maybe a bubble burst since these droplets had issues with gas bubbles) that causes significant droplet deformation and oscillations. There is a moderate degree of sooting. The droplet burns to a relatively small size before disruptive extinction. The noise in the beginning of the droplet history is due to soot influencing the droplet size measurement. The color camera IPSU failed to record any images after deployment. The LLUV IPSU stopped recording images for a brief time in the middle of the burn.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts NW and out of the HiBMS FOV about half way through the test. After deployment, there is a disruption (maybe a bubble burst since these droplets had issues with gas bubbles) that causes significant droplet deformation and oscillations. There is a moderate degree of sooting. The droplet burns to a relatively small size before disruptive extinction. The noise in the beginning of the droplet history is due to soot influencing the droplet size measurement. The color camera IPSU failed to record any images after deployment. The LLUV IPSU stopped recording images for a brief time in the middle of the burn.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-137_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts NW and out of the HiBMS FOV about half way through the test. After deployment, there is a disruption (maybe a bubble burst since these droplets had issues with gas bubbles) that causes significant droplet deformation and oscillations. There is a moderate degree of sooting. The droplet burns to a relatively small size before disruptive extinction. The noise in the beginning of the droplet history is due to soot influencing the droplet size measurement. The color camera IPSU failed to record any images after deployment. The LLUV IPSU stopped recording images for a brief time in the middle of the burn.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-137_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-137_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-137_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.24,
     "max": 0.24,
     "quality": "reported",
     "raw": "0.24",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.418,
     "max": 102.418,
     "quality": "reported",
     "raw": "768.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.13,
     "max": 3.13,
     "quality": "reported",
     "raw": "3.13",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-10-06",
     "quality": "reported",
     "raw": "10/6/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/138",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C21H304",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 138,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.66,
     "max": 27.66,
     "quality": "reported",
     "raw": "300.81",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-138_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.81",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-138_TestSheet.txt"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. The HiBMS IPSU did not record any images for this test. The flame grew in size initially, got very dim, but then shranks, got brighter and burned to disruption at a small size.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. The HiBMS IPSU did not record any images for this test. The flame grew in size initially, got very dim, but then shranks, got brighter and burned to disruption at a small size.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-138_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. The HiBMS IPSU did not record any images for this test. The flame grew in size initially, got very dim, but then shranks, got brighter and burned to disruption at a small size.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-138_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-138_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-138_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.24,
     "max": 0.24,
     "quality": "reported",
     "raw": "0.24",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.472,
     "max": 102.472,
     "quality": "reported",
     "raw": "768.6",
     "column": "Ambient pressure; mmHg"
    },
    "test_date": {
     "text": "2010-10-06",
     "quality": "reported",
     "raw": "10/6/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/139",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C21H305",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 139,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.68,
     "max": 27.68,
     "quality": "reported",
     "raw": "300.83",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-139_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.83",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-139_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 5.4,
     "max": 5.4,
     "quality": "reported",
     "raw": "5.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.63,
     "max": 0.63,
     "quality": "reported",
     "raw": "0.63",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. The droplet deforms shortly after deployment, presumably due to a gas bubble that burst. This causes the droplet to drift slowly NE in the HiBMS. The droplet then had a large flash coincident with ignition that caused the droplet to drift SW at approximately 6 mm/sec. The droplet drifts with a constant trajectory until it leaves the HiBMS FOV about half way through the test. The burning rate is relatively high, and the flame is distorted with the large drift velocity. The droplet burns to a small size where it disrupts coincident with flame extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. The droplet deforms shortly after deployment, presumably due to a gas bubble that burst. This causes the droplet to drift slowly NE in the HiBMS. The droplet then had a large flash coincident with ignition that caused the droplet to drift SW at approximately 6 mm/sec. The droplet drifts with a constant trajectory until it leaves the HiBMS FOV about half way through the test. The burning rate is relatively high, and the flame is distorted with the large drift velocity. The droplet burns to a small size where it disrupts coincident with flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-139_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 1.0 atm ambient environment. The droplet deforms shortly after deployment, presumably due to a gas bubble that burst. This causes the droplet to drift slowly NE in the HiBMS. The droplet then had a large flash coincident with ignition that caused the droplet to drift SW at approximately 6 mm/sec. The droplet drifts with a constant trajectory until it leaves the HiBMS FOV about half way through the test. The burning rate is relatively high, and the flame is distorted with the large drift velocity. The droplet burns to a small size where it disrupts coincident with flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-139_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-139_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-139_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.24,
     "max": 0.24,
     "quality": "reported",
     "raw": "0.24",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.392,
     "max": 102.392,
     "quality": "reported",
     "raw": "768",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.75,
     "max": 1.75,
     "quality": "reported",
     "raw": "1.75",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-10-06",
     "quality": "reported",
     "raw": "10/6/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/140",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C14M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 140,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.34,
     "max": 27.34,
     "quality": "reported",
     "raw": "300.49",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-140_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.49",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-140_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 1.3,
     "max": 1.3,
     "quality": "reported",
     "raw": "1.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.15/0.35/0.50 O2/N2/CO2, 0.70 atm ambient environment. The droplet has a very small S drift after deployment and ignition, but remains in the HiBMS FOV for the entire recording time. Very short burn, with the droplet being either significantly larger than the radiative extinction limit or completely outside the quasi-steady flammability boundary.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.15/0.35/0.50 O2/N2/CO2, 0.70 atm ambient environment. The droplet has a very small S drift after deployment and ignition, but remains in the HiBMS FOV for the entire recording time. Very short burn, with the droplet being either significantly larger than the radiative extinction limit or completely outside the quasi-steady flammability boundary.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-140_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.15/0.35/0.50 O2/N2/CO2, 0.70 atm ambient environment. The droplet has a very small S drift after deployment and ignition, but remains in the HiBMS FOV for the entire recording time. Very short burn, with the droplet being either significantly larger than the radiative extinction limit or completely outside the quasi-steady flammability boundary.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-140_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.95,
     "max": 3.95,
     "quality": "reported",
     "raw": "3.95",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-140_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-140_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.1275,
     "max": 71.1275,
     "quality": "reported",
     "raw": "533.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.98,
     "max": 3.98,
     "quality": "reported",
     "raw": "3.98",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-11-04",
     "quality": "reported",
     "raw": "11/4/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/141",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C14M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 141,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.64,
     "max": 27.64,
     "quality": "reported",
     "raw": "300.79",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-141_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.79",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-141_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 2.3,
     "max": 2.3,
     "quality": "reported",
     "raw": "2.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.15/0.35/0.50 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts slowly S but remains in the HiBMS FOV for the entire test and well after flame extinction. The droplet abruptly leaves the HiBMS FOV in the video, likely because the HiBMS stopped archiving images for a short time. Very short burn, either radiative extinction or outside the quasi-steady flammability boundary all together.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.15/0.35/0.50 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts slowly S but remains in the HiBMS FOV for the entire test and well after flame extinction. The droplet abruptly leaves the HiBMS FOV in the video, likely because the HiBMS stopped archiving images for a short time. Very short burn, either radiative extinction or outside the quasi-steady flammability boundary all together.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-141_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.15/0.35/0.50 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts slowly S but remains in the HiBMS FOV for the entire test and well after flame extinction. The droplet abruptly leaves the HiBMS FOV in the video, likely because the HiBMS stopped archiving images for a short time. Very short burn, either radiative extinction or outside the quasi-steady flammability boundary all together.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-141_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.73,
     "max": 2.73,
     "quality": "reported",
     "raw": "2.73",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-141_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-141_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.2075,
     "max": 71.2075,
     "quality": "reported",
     "raw": "534.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.86,
     "max": 2.86,
     "quality": "reported",
     "raw": "2.86",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-11-04",
     "quality": "reported",
     "raw": "11/4/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/142",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C14M301",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 142,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.7,
     "max": 27.7,
     "quality": "reported",
     "raw": "300.85",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-142_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.85",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-142_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 3.4,
     "max": 3.4,
     "quality": "reported",
     "raw": "3.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.39,
     "max": 0.39,
     "quality": "reported",
     "raw": "0.39",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.15/0.35/0.50 O2/N2/CO2, 0.70 atm ambient environment. The droplet deploys with a relatively high (~ 6 mm/sec) NW drift velocity. The burn time is relatively short and the droplet stays within the HiBMS FOV for the entire test.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.15/0.35/0.50 O2/N2/CO2, 0.70 atm ambient environment. The droplet deploys with a relatively high (~ 6 mm/sec) NW drift velocity. The burn time is relatively short and the droplet stays within the HiBMS FOV for the entire test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-142_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.15/0.35/0.50 O2/N2/CO2, 0.70 atm ambient environment. The droplet deploys with a relatively high (~ 6 mm/sec) NW drift velocity. The burn time is relatively short and the droplet stays within the HiBMS FOV for the entire test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-142_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.48,
     "max": 1.48,
     "quality": "reported",
     "raw": "1.48",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-142_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-142_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.2608,
     "max": 71.2608,
     "quality": "reported",
     "raw": "534.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.86,
     "max": 1.86,
     "quality": "reported",
     "raw": "1.86",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-11-04",
     "quality": "reported",
     "raw": "11/4/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/143",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C14M302",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 143,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.94,
     "max": 27.94,
     "quality": "reported",
     "raw": "301.09",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-143_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 301.09",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-143_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 2.7,
     "max": 2.7,
     "quality": "reported",
     "raw": "2.7",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.36,
     "max": 0.36,
     "quality": "reported",
     "raw": "0.36",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.15/0.35/0.50 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N after deployment and ignition and out of the HiBMS FOV after flame extinction. It then drifts back into the HiBMS FOV before IPSU-1 recording stopped (thus the gap in the droplet history below). This was a smaller droplet and a very short burn, likely outside quasi-steady flammability boundary, or more likely, right at the boundary.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.15/0.35/0.50 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N after deployment and ignition and out of the HiBMS FOV after flame extinction. It then drifts back into the HiBMS FOV before IPSU-1 recording stopped (thus the gap in the droplet history below). This was a smaller droplet and a very short burn, likely outside quasi-steady flammability boundary, or more likely, right at the boundary.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-143_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.15/0.35/0.50 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts N after deployment and ignition and out of the HiBMS FOV after flame extinction. It then drifts back into the HiBMS FOV before IPSU-1 recording stopped (thus the gap in the droplet history below). This was a smaller droplet and a very short burn, likely outside quasi-steady flammability boundary, or more likely, right at the boundary.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-143_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.06,
     "max": 2.06,
     "quality": "reported",
     "raw": "2.06",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-143_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-143_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.2875,
     "max": 71.2875,
     "quality": "reported",
     "raw": "534.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.25,
     "max": 2.25,
     "quality": "reported",
     "raw": "2.25",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-11-04",
     "quality": "reported",
     "raw": "11/4/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/144",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C01M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 144,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.59,
     "max": 25.59,
     "quality": "reported",
     "raw": "298.74",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-144_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.74",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-144_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 23.8,
     "max": 23.8,
     "quality": "reported",
     "raw": "23.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.05,
     "max": 0.05,
     "quality": "reported",
     "raw": "0.05",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition. Midway through the burn the droplet drifts S and leaves the HiBMS FOV just before the flame extinguishes. The droplet remains in the FOVs of the LLUV and color cameras. The extinction droplet diameter comes from extrapolating the droplet history from the time the droplet leaves the HiBMS FOV until the time of flame extinction using the burning rate constant measured near the end of the time when the droplet is within the HiBMS FOV.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition. Midway through the burn the droplet drifts S and leaves the HiBMS FOV just before the flame extinguishes. The droplet remains in the FOVs of the LLUV and color cameras. The extinction droplet diameter comes from extrapolating the droplet history from the time the droplet leaves the HiBMS FOV until the time of flame extinction using the burning rate constant measured near the end of the time when the droplet is within the HiBMS FOV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-144_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition. Midway through the burn the droplet drifts S and leaves the HiBMS FOV just before the flame extinguishes. The droplet remains in the FOVs of the LLUV and color cameras. The extinction droplet diameter comes from extrapolating the droplet history from the time the droplet leaves the HiBMS FOV until the time of flame extinction using the burning rate constant measured near the end of the time when the droplet is within the HiBMS FOV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-144_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.53,
     "max": 1.53,
     "quality": "reported",
     "raw": "1.53",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-144_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-144_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.578,
     "max": 101.578,
     "quality": "reported",
     "raw": "761.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.53,
     "max": 3.53,
     "quality": "reported",
     "raw": "3.53",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-11-16",
     "quality": "reported",
     "raw": "11/16/10",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/145",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C01M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 145,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.15,
     "max": 26.15,
     "quality": "reported",
     "raw": "299.30",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-145_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.30",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-145_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "20",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.05,
     "max": 0.05,
     "quality": "reported",
     "raw": "0.05",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet stays in the FOVs of all the cameras for the entire burn.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet stays in the FOVs of all the cameras for the entire burn.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-145_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet stays in the FOVs of all the cameras for the entire burn.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-145_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.61,
     "max": 1.61,
     "quality": "reported",
     "raw": "1.61",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-145_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-145_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.792,
     "max": 101.792,
     "quality": "reported",
     "raw": "763.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.33,
     "max": 3.33,
     "quality": "reported",
     "raw": "3.33",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-11-16",
     "quality": "reported",
     "raw": "11/16/10",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/146",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C01M301",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 146,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.51,
     "max": 26.51,
     "quality": "reported",
     "raw": "299.66",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-146_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.66",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-146_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 39.2,
     "max": 39.2,
     "quality": "reported",
     "raw": "39.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.41,
     "max": 0.41,
     "quality": "reported",
     "raw": "0.41",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.05,
     "max": 0.05,
     "quality": "reported",
     "raw": "0.05",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. This is a very large droplet that is nearly motionless after deployment and ignition. The droplet eventually drifts S in the HiBMS FOV and leaves the FOV a short time before flame extinction. The flame size from the color camera is a bit more reliable than the LLUV because of the very dim flame coupled with the contamination on the CIR LLUV viewing window. The extinction droplet diameter comes from extrapolating the droplet history from when the droplet leaves the HiBMS FOV until the time of flame extinction using the burning rate constant measured near the end of the time the droplet is within the HiBMS FOV.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. This is a very large droplet that is nearly motionless after deployment and ignition. The droplet eventually drifts S in the HiBMS FOV and leaves the FOV a short time before flame extinction. The flame size from the color camera is a bit more reliable than the LLUV because of the very dim flame coupled with the contamination on the CIR LLUV viewing window. The extinction droplet diameter comes from extrapolating the droplet history from when the droplet leaves the HiBMS FOV until the time of flame extinction using the burning rate constant measured near the end of the time the droplet is within the HiBMS FOV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-146_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. This is a very large droplet that is nearly motionless after deployment and ignition. The droplet eventually drifts S in the HiBMS FOV and leaves the FOV a short time before flame extinction. The flame size from the color camera is a bit more reliable than the LLUV because of the very dim flame coupled with the contamination on the CIR LLUV viewing window. The extinction droplet diameter comes from extrapolating the droplet history from when the droplet leaves the HiBMS FOV until the time of flame extinction using the burning rate constant measured near the end of the time the droplet is within the HiBMS FOV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-146_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.95,
     "max": 1.95,
     "quality": "reported",
     "raw": "1.95",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-146_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-146_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.058,
     "max": 102.058,
     "quality": "reported",
     "raw": "765.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 4.35,
     "max": 4.35,
     "quality": "reported",
     "raw": "4.35",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-11-16",
     "quality": "reported",
     "raw": "11/16/10",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/147",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C13M102",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 147,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.69,
     "max": 26.69,
     "quality": "reported",
     "raw": "299.84",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-147_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.84",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-147_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 7.8,
     "max": 7.8,
     "quality": "reported",
     "raw": "7.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.17/0.38/0.45 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts SE at approximately 4 - 5 mm/sec (deployment-induced, changed direction at ignition) and out of the HiBMS FOV after a few seconds. The droplet remains in the LLUV and color camera FOVs for the entire test but is at the very edge of the FOVs of both cameras. The flame gets continually dimmer throughout the test. There is no extinction droplet diameter because the droplet is in the HiBMS FOV for such a small fraction of the burn.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.17/0.38/0.45 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts SE at approximately 4 - 5 mm/sec (deployment-induced, changed direction at ignition) and out of the HiBMS FOV after a few seconds. The droplet remains in the LLUV and color camera FOVs for the entire test but is at the very edge of the FOVs of both cameras. The flame gets continually dimmer throughout the test. There is no extinction droplet diameter because the droplet is in the HiBMS FOV for such a small fraction of the burn.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-147_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.17/0.38/0.45 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts SE at approximately 4 - 5 mm/sec (deployment-induced, changed direction at ignition) and out of the HiBMS FOV after a few seconds. The droplet remains in the LLUV and color camera FOVs for the entire test but is at the very edge of the FOVs of both cameras. The flame gets continually dimmer throughout the test. There is no extinction droplet diameter because the droplet is in the HiBMS FOV for such a small fraction of the burn.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-147_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.49,
     "max": 2.49,
     "quality": "reported",
     "raw": "2.49",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-147_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-147_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.38,
     "max": 0.38,
     "quality": "reported",
     "raw": "0.38",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.4208,
     "max": 71.4208,
     "quality": "reported",
     "raw": "535.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.02,
     "max": 3.02,
     "quality": "reported",
     "raw": "3.02",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-09-13",
     "quality": "reported",
     "raw": "9/13/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/148",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C01H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 148,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.79,
     "max": 25.79,
     "quality": "reported",
     "raw": "298.94",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-148_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.94",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-148_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 11.8,
     "max": 11.8,
     "quality": "reported",
     "raw": "11.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.54,
     "max": 0.54,
     "quality": "reported",
     "raw": "0.54",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.05,
     "max": 0.05,
     "quality": "reported",
     "raw": "0.05",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. Very little residual motion after deployment and ignition. The droplet stays in the FOVs of all the cameras for the entire test. The droplet burns cleanly to small size, then disrupts coincident with flame extinction. The extinction droplet size is the droplet size when the flame/droplet disrupts. The HiBMS IPSU (IPSU-1) stopped recording data sometime before deployment to partway through the burn. The plotted data uses the first measured droplet as time zero although the droplet was burning for some time before that point.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. Very little residual motion after deployment and ignition. The droplet stays in the FOVs of all the cameras for the entire test. The droplet burns cleanly to small size, then disrupts coincident with flame extinction. The extinction droplet size is the droplet size when the flame/droplet disrupts. The HiBMS IPSU (IPSU-1) stopped recording data sometime before deployment to partway through the burn. The plotted data uses the first measured droplet as time zero although the droplet was burning for some time before that point.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-148_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. Very little residual motion after deployment and ignition. The droplet stays in the FOVs of all the cameras for the entire test. The droplet burns cleanly to small size, then disrupts coincident with flame extinction. The extinction droplet size is the droplet size when the flame/droplet disrupts. The HiBMS IPSU (IPSU-1) stopped recording data sometime before deployment to partway through the burn. The plotted data uses the first measured droplet as time zero although the droplet was burning for some time before that point.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-148_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.15,
     "max": 1.15,
     "quality": "reported",
     "raw": "1.15",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-148_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-148_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.912,
     "max": 101.912,
     "quality": "reported",
     "raw": "764.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.58,
     "max": 2.58,
     "quality": "reported",
     "raw": "2.58",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-11-18",
     "quality": "reported",
     "raw": "11/18/10",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/149",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C01H201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 149,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.47,
     "max": 26.47,
     "quality": "reported",
     "raw": "299.62",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-149_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.62",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-149_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8.9,
     "max": 8.9,
     "quality": "reported",
     "raw": "8.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.53,
     "max": 0.53,
     "quality": "reported",
     "raw": "0.53",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.05,
     "max": 0.05,
     "quality": "reported",
     "raw": "0.05",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. Excellent deployment with almost no residual motion after deployment and ignition. The droplet drifts a little S in the HiBMS FOV but stays in the FOV of all cameras for the entire test. The droplet burns cleanly down to a small size where it disrupts coincident with flame extinction. The extinction droplet size is the droplet size when the disruption occurs.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. Excellent deployment with almost no residual motion after deployment and ignition. The droplet drifts a little S in the HiBMS FOV but stays in the FOV of all cameras for the entire test. The droplet burns cleanly down to a small size where it disrupts coincident with flame extinction. The extinction droplet size is the droplet size when the disruption occurs.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-149_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. Excellent deployment with almost no residual motion after deployment and ignition. The droplet drifts a little S in the HiBMS FOV but stays in the FOV of all cameras for the entire test. The droplet burns cleanly down to a small size where it disrupts coincident with flame extinction. The extinction droplet size is the droplet size when the disruption occurs.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-149_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.82,
     "max": 0.82,
     "quality": "reported",
     "raw": "0.82",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-149_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-149_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.152,
     "max": 102.152,
     "quality": "reported",
     "raw": "766.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.21,
     "max": 2.21,
     "quality": "reported",
     "raw": "2.21",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-11-18",
     "quality": "reported",
     "raw": "11/18/10",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/150",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C01H302",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 150,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.91,
     "max": 26.91,
     "quality": "reported",
     "raw": "300.06",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-150_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.06",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-150_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.46,
     "max": 0.46,
     "quality": "reported",
     "raw": "0.46",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.05,
     "max": 0.05,
     "quality": "reported",
     "raw": "0.05",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient enviornment. The droplet drifts NW in HiBMS FOV after deployment and ignition, but remains in the FOV for the entire burn, but leaves the FOV shortly after visible flame extinction. The flame oscillates a few times before radiatively extinguishing. There is a vapor cloud that forms approximately 20 seconds after visible flame extinction. This is indicative of cool flame burning and extinction after visible flame extinction. The color camera IPSU did not record any images after deployment.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient enviornment. The droplet drifts NW in HiBMS FOV after deployment and ignition, but remains in the FOV for the entire burn, but leaves the FOV shortly after visible flame extinction. The flame oscillates a few times before radiatively extinguishing. There is a vapor cloud that forms approximately 20 seconds after visible flame extinction. This is indicative of cool flame burning and extinction after visible flame extinction. The color camera IPSU did not record any images after deployment.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-150_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient enviornment. The droplet drifts NW in HiBMS FOV after deployment and ignition, but remains in the FOV for the entire burn, but leaves the FOV shortly after visible flame extinction. The flame oscillates a few times before radiatively extinguishing. There is a vapor cloud that forms approximately 20 seconds after visible flame extinction. This is indicative of cool flame burning and extinction after visible flame extinction. The color camera IPSU did not record any images after deployment.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-150_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.54,
     "max": 2.54,
     "quality": "reported",
     "raw": "2.54",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-150_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-150_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.338,
     "max": 102.338,
     "quality": "reported",
     "raw": "767.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.18,
     "max": 3.18,
     "quality": "reported",
     "raw": "3.18",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-11-18",
     "quality": "reported",
     "raw": "11/18/10",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/151",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C03M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 151,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.05,
     "max": 26.05,
     "quality": "reported",
     "raw": "299.20",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-151_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.20",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-151_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 31.3,
     "max": 31.3,
     "quality": "reported",
     "raw": "31.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.36,
     "max": 0.36,
     "quality": "reported",
     "raw": "0.36",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts NE and out of the HiBMS FOV about 1/4 of the way through the burn. The droplet burned for a very long time. The flame was very dim and difficult to see, with significant noise in the LLUV using automated analysis and a very low threshold for manual analysis. The droplet starts to oscillate in the midway point of the burn for a few seconds, then burns with a steady flame until it oscillates again right before flame extinction. There is no extinction droplet diameter listed because the droplet is in the HiBMS FOV for such a short time.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts NE and out of the HiBMS FOV about 1/4 of the way through the burn. The droplet burned for a very long time. The flame was very dim and difficult to see, with significant noise in the LLUV using automated analysis and a very low threshold for manual analysis. The droplet starts to oscillate in the midway point of the burn for a few seconds, then burns with a steady flame until it oscillates again right before flame extinction. There is no extinction droplet diameter listed because the droplet is in the HiBMS FOV for such a short time.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-151_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts NE and out of the HiBMS FOV about 1/4 of the way through the burn. The droplet burned for a very long time. The flame was very dim and difficult to see, with significant noise in the LLUV using automated analysis and a very low threshold for manual analysis. The droplet starts to oscillate in the midway point of the burn for a few seconds, then burns with a steady flame until it oscillates again right before flame extinction. There is no extinction droplet diameter listed because the droplet is in the HiBMS FOV for such a short time.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-151_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-151_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-151_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.658,
     "max": 101.658,
     "quality": "reported",
     "raw": "762.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.86,
     "max": 3.86,
     "quality": "reported",
     "raw": "3.86",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-12-08",
     "quality": "reported",
     "raw": "12/8/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/152",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C03M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 152,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.84,
     "max": 26.84,
     "quality": "reported",
     "raw": "299.99",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-152_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.99",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-152_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 23.2,
     "max": 23.2,
     "quality": "reported",
     "raw": "23.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.43,
     "max": 0.43,
     "quality": "reported",
     "raw": "0.43",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts S in the HiBMS FOV and leaves the FOV about 2/3rds of the way through the burn. The extinction droplet diameter comes from extrapolating the droplet history from the time the droplet leaves the HiBMS FOV until the time of flame extinction using the burning rate constant from the droplet history for a short period of time before the droplet leaves the HiBMS FOV.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts S in the HiBMS FOV and leaves the FOV about 2/3rds of the way through the burn. The extinction droplet diameter comes from extrapolating the droplet history from the time the droplet leaves the HiBMS FOV until the time of flame extinction using the burning rate constant from the droplet history for a short period of time before the droplet leaves the HiBMS FOV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-152_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts S in the HiBMS FOV and leaves the FOV about 2/3rds of the way through the burn. The extinction droplet diameter comes from extrapolating the droplet history from the time the droplet leaves the HiBMS FOV until the time of flame extinction using the burning rate constant from the droplet history for a short period of time before the droplet leaves the HiBMS FOV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-152_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.23,
     "max": 1.23,
     "quality": "reported",
     "raw": "1.23",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-152_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-152_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.992,
     "max": 101.992,
     "quality": "reported",
     "raw": "765",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.33,
     "max": 3.33,
     "quality": "reported",
     "raw": "3.33",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-12-08",
     "quality": "reported",
     "raw": "12/8/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/153",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C03M301",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 153,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.13,
     "max": 27.13,
     "quality": "reported",
     "raw": "300.28",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-153_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.28",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-153_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 15.7,
     "max": 15.7,
     "quality": "reported",
     "raw": "15.7",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.42,
     "max": 0.42,
     "quality": "reported",
     "raw": "0.42",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts N after deployment and ignition, then begins to drift back to the center. It stays in the HiBMS FOV until 4/5 of the way through the burn when the HiBMS stops recording data for about 5 seconds. The HiBMS did not record data when the flame extinguished. It was a long burn, with the extinction diameter estimated from the droplet history extrapolated until visible flame extinction using the measured burning rate constant for a short time right before recording stopped.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts N after deployment and ignition, then begins to drift back to the center. It stays in the HiBMS FOV until 4/5 of the way through the burn when the HiBMS stops recording data for about 5 seconds. The HiBMS did not record data when the flame extinguished. It was a long burn, with the extinction diameter estimated from the droplet history extrapolated until visible flame extinction using the measured burning rate constant for a short time right before recording stopped.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-153_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts N after deployment and ignition, then begins to drift back to the center. It stays in the HiBMS FOV until 4/5 of the way through the burn when the HiBMS stops recording data for about 5 seconds. The HiBMS did not record data when the flame extinguished. It was a long burn, with the extinction diameter estimated from the droplet history extrapolated until visible flame extinction using the measured burning rate constant for a short time right before recording stopped.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-153_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.19,
     "max": 1.19,
     "quality": "reported",
     "raw": "1.19",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-153_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-153_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.072,
     "max": 102.072,
     "quality": "reported",
     "raw": "765.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.78,
     "max": 2.78,
     "quality": "reported",
     "raw": "2.78",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-12-08",
     "quality": "reported",
     "raw": "12/8/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/154",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C03H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 154,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.11,
     "max": 26.11,
     "quality": "reported",
     "raw": "299.26",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-154_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.26",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-154_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 2.2,
     "max": 2.2,
     "quality": "reported",
     "raw": "2.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.34,
     "max": 0.34,
     "quality": "reported",
     "raw": "0.34",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. Almost no residual motion after deployment and ignition. This is a relatively large droplet that stayed in the HiBMS FOV for the entire (short) burn and the entire recording time of the HiBMS IPSU. The droplet radiatively extinguishes after a short burn with no flame oscillations. There is significant post visible flame extinction vaporoization and large vapor cloud formed late in the recording time. The post visible flame extinction behavior is indicative of cool flame burning and extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. Almost no residual motion after deployment and ignition. This is a relatively large droplet that stayed in the HiBMS FOV for the entire (short) burn and the entire recording time of the HiBMS IPSU. The droplet radiatively extinguishes after a short burn with no flame oscillations. There is significant post visible flame extinction vaporoization and large vapor cloud formed late in the recording time. The post visible flame extinction behavior is indicative of cool flame burning and extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-154_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. Almost no residual motion after deployment and ignition. This is a relatively large droplet that stayed in the HiBMS FOV for the entire (short) burn and the entire recording time of the HiBMS IPSU. The droplet radiatively extinguishes after a short burn with no flame oscillations. There is significant post visible flame extinction vaporoization and large vapor cloud formed late in the recording time. The post visible flame extinction behavior is indicative of cool flame burning and extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-154_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.6,
     "max": 3.6,
     "quality": "reported",
     "raw": "3.6",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-154_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-154_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.632,
     "max": 101.632,
     "quality": "reported",
     "raw": "762.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.7,
     "max": 3.7,
     "quality": "reported",
     "raw": "3.7",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-12-09",
     "quality": "reported",
     "raw": "12/9/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/155",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C03H201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 155,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.97,
     "max": 26.97,
     "quality": "reported",
     "raw": "300.12",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-155_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.12",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-155_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 2.7,
     "max": 2.7,
     "quality": "reported",
     "raw": "2.7",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.39,
     "max": 0.39,
     "quality": "reported",
     "raw": "0.39",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet had almost no residual motion after deployment and ignition and stayed in the HiBMS FOV for the entire time images were recorded. The flame had a very short burn time, likely with radiative extinction. There was a high vaporization rate after visible flame extinction, and an eventual plateau late in the HiBMS IPSU recording time coincident with a large vapor cloud. The post visible flame extinction behavior is indicative of cool flame burning and extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet had almost no residual motion after deployment and ignition and stayed in the HiBMS FOV for the entire time images were recorded. The flame had a very short burn time, likely with radiative extinction. There was a high vaporization rate after visible flame extinction, and an eventual plateau late in the HiBMS IPSU recording time coincident with a large vapor cloud. The post visible flame extinction behavior is indicative of cool flame burning and extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-155_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet had almost no residual motion after deployment and ignition and stayed in the HiBMS FOV for the entire time images were recorded. The flame had a very short burn time, likely with radiative extinction. There was a high vaporization rate after visible flame extinction, and an eventual plateau late in the HiBMS IPSU recording time coincident with a large vapor cloud. The post visible flame extinction behavior is indicative of cool flame burning and extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-155_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.52,
     "max": 2.52,
     "quality": "reported",
     "raw": "2.52",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-155_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-155_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.978,
     "max": 101.978,
     "quality": "reported",
     "raw": "764.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.73,
     "max": 2.73,
     "quality": "reported",
     "raw": "2.73",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-12-09",
     "quality": "reported",
     "raw": "12/9/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/156",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C03H401",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 156,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.27,
     "max": 27.27,
     "quality": "reported",
     "raw": "300.42",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-157_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.42",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-157_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 3.2,
     "max": 3.2,
     "quality": "reported",
     "raw": "3.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.48,
     "max": 0.48,
     "quality": "reported",
     "raw": "0.48",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. This is a very small droplet that has a high NW drift velocity in HiBMS FOV. The droplet leaves the HiBMS FOV about 1/3rd of the way through the test. The droplet moves past the NW igniter before the igniter begins to withdraw. The color camera IPSU-4 failed to record any frames after deployment. There is no extinction diameter reported because the droplet is within the HiBMS FOV for such a short fraction of the entire test.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. This is a very small droplet that has a high NW drift velocity in HiBMS FOV. The droplet leaves the HiBMS FOV about 1/3rd of the way through the test. The droplet moves past the NW igniter before the igniter begins to withdraw. The color camera IPSU-4 failed to record any frames after deployment. There is no extinction diameter reported because the droplet is within the HiBMS FOV for such a short fraction of the entire test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-157_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. This is a very small droplet that has a high NW drift velocity in HiBMS FOV. The droplet leaves the HiBMS FOV about 1/3rd of the way through the test. The droplet moves past the NW igniter before the igniter begins to withdraw. The color camera IPSU-4 failed to record any frames after deployment. There is no extinction diameter reported because the droplet is within the HiBMS FOV for such a short fraction of the entire test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-157_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-157_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-157_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.085,
     "max": 102.085,
     "quality": "reported",
     "raw": "765.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.34,
     "max": 1.34,
     "quality": "reported",
     "raw": "1.34",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-12-09",
     "quality": "reported",
     "raw": "12/9/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/157",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C05M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 157,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.19,
     "max": 25.19,
     "quality": "reported",
     "raw": "298.34",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-158_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.34",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-158_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 7.6,
     "max": 7.6,
     "quality": "reported",
     "raw": "7.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. This relatively large droplet is nearly motionless after deployment and ignition and stays in the FOV of all the cameras. The flame oscillates for a few cycles (increasing in magnitude with time) until radiative extinction. The flame is difficult to see with the LLUV because of both the dim flame and the contamination on the LLUV viewing window.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. This relatively large droplet is nearly motionless after deployment and ignition and stays in the FOV of all the cameras. The flame oscillates for a few cycles (increasing in magnitude with time) until radiative extinction. The flame is difficult to see with the LLUV because of both the dim flame and the contamination on the LLUV viewing window.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-158_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. This relatively large droplet is nearly motionless after deployment and ignition and stays in the FOV of all the cameras. The flame oscillates for a few cycles (increasing in magnitude with time) until radiative extinction. The flame is difficult to see with the LLUV because of both the dim flame and the contamination on the LLUV viewing window.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-158_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.96,
     "max": 3.96,
     "quality": "reported",
     "raw": "3.96",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-158_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-158_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.16,
     "max": 0.16,
     "quality": "reported",
     "raw": "0.16",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.605,
     "max": 101.605,
     "quality": "reported",
     "raw": "762.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 4.24,
     "max": 4.24,
     "quality": "reported",
     "raw": "4.24",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-12-14",
     "quality": "reported",
     "raw": "12/14/10",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/158",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C05M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 158,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.94,
     "max": 25.94,
     "quality": "reported",
     "raw": "299.09",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-159_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.09",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-159_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 10.1,
     "max": 10.1,
     "quality": "reported",
     "raw": "10.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.37,
     "max": 0.37,
     "quality": "reported",
     "raw": "0.37",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition and remains near the center of the FOV for the entire test. The flame oscillates for several cycles before radiatively extinguishing. The LLUV flame diameter data has a lot of noise owing to the very dim flames combined with the contamination on the CIR LLUV viewing window.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition and remains near the center of the FOV for the entire test. The flame oscillates for several cycles before radiatively extinguishing. The LLUV flame diameter data has a lot of noise owing to the very dim flames combined with the contamination on the CIR LLUV viewing window.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-159_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition and remains near the center of the FOV for the entire test. The flame oscillates for several cycles before radiatively extinguishing. The LLUV flame diameter data has a lot of noise owing to the very dim flames combined with the contamination on the CIR LLUV viewing window.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-159_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.22,
     "max": 3.22,
     "quality": "reported",
     "raw": "3.22",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-159_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-159_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.16,
     "max": 0.16,
     "quality": "reported",
     "raw": "0.16",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.912,
     "max": 101.912,
     "quality": "reported",
     "raw": "764.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.7,
     "max": 3.7,
     "quality": "reported",
     "raw": "3.7",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-12-14",
     "quality": "reported",
     "raw": "12/14/10",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/159",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C05M301",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 159,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.35,
     "max": 26.35,
     "quality": "reported",
     "raw": "299.50",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-160_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.50",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-160_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 14.9,
     "max": 14.9,
     "quality": "reported",
     "raw": "14.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.38,
     "max": 0.38,
     "quality": "reported",
     "raw": "0.38",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.19/0.59/0.25 O2/N2/CO2, 1.0 atm ambient environment. The droplet stays with the FOV of all the cameras for the entire burn. The flame diffusively extinguishes. The LLUV images are dim, but the flame size data seems reasonable, but it is a bit noisy. This is the result of both the dim LLUV images and the contamination of the CIR LLUV viewing window.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.19/0.59/0.25 O2/N2/CO2, 1.0 atm ambient environment. The droplet stays with the FOV of all the cameras for the entire burn. The flame diffusively extinguishes. The LLUV images are dim, but the flame size data seems reasonable, but it is a bit noisy. This is the result of both the dim LLUV images and the contamination of the CIR LLUV viewing window.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-160_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.19/0.59/0.25 O2/N2/CO2, 1.0 atm ambient environment. The droplet stays with the FOV of all the cameras for the entire burn. The flame diffusively extinguishes. The LLUV images are dim, but the flame size data seems reasonable, but it is a bit noisy. This is the result of both the dim LLUV images and the contamination of the CIR LLUV viewing window.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-160_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.34,
     "max": 1.34,
     "quality": "reported",
     "raw": "1.34",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-160_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-160_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.16,
     "max": 0.16,
     "quality": "reported",
     "raw": "0.16",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.058,
     "max": 102.058,
     "quality": "reported",
     "raw": "765.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.71,
     "max": 2.71,
     "quality": "reported",
     "raw": "2.71",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-12-14",
     "quality": "reported",
     "raw": "12/14/10",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/160",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C05M401",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 160,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.05,
     "max": 27.05,
     "quality": "reported",
     "raw": "300.20",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-161_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.20",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-161_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 14.8,
     "max": 14.8,
     "quality": "reported",
     "raw": "14.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.38,
     "max": 0.38,
     "quality": "reported",
     "raw": "0.38",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.16/0.59/0.25 O2/N2/CO2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition and stays within the FOV of all cameras for the entire burn. A long burn to diffusive extinction. The LLUV images are dim and there is a lot of noise in the LLUV flame size data owing to both the dimness of the flame and the contamination of the CIR LLUV viewing window.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.16/0.59/0.25 O2/N2/CO2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition and stays within the FOV of all cameras for the entire burn. A long burn to diffusive extinction. The LLUV images are dim and there is a lot of noise in the LLUV flame size data owing to both the dimness of the flame and the contamination of the CIR LLUV viewing window.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-161_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.16/0.59/0.25 O2/N2/CO2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition and stays within the FOV of all cameras for the entire burn. A long burn to diffusive extinction. The LLUV images are dim and there is a lot of noise in the LLUV flame size data owing to both the dimness of the flame and the contamination of the CIR LLUV viewing window.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-161_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.52,
     "max": 1.52,
     "quality": "reported",
     "raw": "1.52",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-161_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-161_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.16,
     "max": 0.16,
     "quality": "reported",
     "raw": "0.16",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.338,
     "max": 102.338,
     "quality": "reported",
     "raw": "767.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.77,
     "max": 2.77,
     "quality": "reported",
     "raw": "2.77",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-12-14",
     "quality": "reported",
     "raw": "12/14/10",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/161",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C06M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 161,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.93,
     "max": 25.93,
     "quality": "reported",
     "raw": "299.08",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-162_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.08",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-162_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.28,
     "max": 0.28,
     "quality": "reported",
     "raw": "0.28",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.32,
     "max": 0.32,
     "quality": "reported",
     "raw": "0.32",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.14/0.54/0.32 O2/N2/CO2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition and remains within the FOV of all the cameras for the duration of the test. The flame oscillates for several seconds with increasing magnitude before radiatively extinguishing. The LLUV images are dim and the LLUV flame data has a lot of noise because of the dimness of the flame and the contamination on the CIR LLUV viewing window.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.14/0.54/0.32 O2/N2/CO2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition and remains within the FOV of all the cameras for the duration of the test. The flame oscillates for several seconds with increasing magnitude before radiatively extinguishing. The LLUV images are dim and the LLUV flame data has a lot of noise because of the dimness of the flame and the contamination on the CIR LLUV viewing window.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-162_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.14/0.54/0.32 O2/N2/CO2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition and remains within the FOV of all the cameras for the duration of the test. The flame oscillates for several seconds with increasing magnitude before radiatively extinguishing. The LLUV images are dim and the LLUV flame data has a lot of noise because of the dimness of the flame and the contamination on the CIR LLUV viewing window.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-162_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.5,
     "max": 3.5,
     "quality": "reported",
     "raw": "3.5",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-162_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-162_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.54,
     "max": 0.54,
     "quality": "reported",
     "raw": "0.54",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.765,
     "max": 101.765,
     "quality": "reported",
     "raw": "763.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.72,
     "max": 3.72,
     "quality": "reported",
     "raw": "3.72",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-12-28",
     "quality": "reported",
     "raw": "12/28/10",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/162",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C06M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 162,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.18,
     "max": 26.18,
     "quality": "reported",
     "raw": "299.33",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-163_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.33",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-163_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8.5,
     "max": 8.5,
     "quality": "reported",
     "raw": "8.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.37,
     "max": 0.37,
     "quality": "reported",
     "raw": "0.37",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.32,
     "max": 0.32,
     "quality": "reported",
     "raw": "0.32",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.14/0.54/0.32 O2/N2/CO2, 1.0 atm ambient environment. The droplet remains in the FOV of all the cameras for the entire burn. The flame oscillates for several cycles of increasing magnitude before radiatively extinguishing. The LLUV images are dim and the the LLUV flame data has a lot of noise as a result of the dimness of the flames and the contamination on the CIR LLUV viewing window.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.14/0.54/0.32 O2/N2/CO2, 1.0 atm ambient environment. The droplet remains in the FOV of all the cameras for the entire burn. The flame oscillates for several cycles of increasing magnitude before radiatively extinguishing. The LLUV images are dim and the the LLUV flame data has a lot of noise as a result of the dimness of the flames and the contamination on the CIR LLUV viewing window.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-163_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.14/0.54/0.32 O2/N2/CO2, 1.0 atm ambient environment. The droplet remains in the FOV of all the cameras for the entire burn. The flame oscillates for several cycles of increasing magnitude before radiatively extinguishing. The LLUV images are dim and the the LLUV flame data has a lot of noise as a result of the dimness of the flames and the contamination on the CIR LLUV viewing window.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-163_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.54,
     "max": 2.54,
     "quality": "reported",
     "raw": "2.54",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-163_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-163_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.53,
     "max": 0.53,
     "quality": "reported",
     "raw": "0.53",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.912,
     "max": 101.912,
     "quality": "reported",
     "raw": "764.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.05,
     "max": 3.05,
     "quality": "reported",
     "raw": "3.05",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-12-28",
     "quality": "reported",
     "raw": "12/28/10",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/163",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C06M301",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 163,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.75,
     "max": 26.75,
     "quality": "reported",
     "raw": "299.90",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-164_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.90",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-164_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 11.6,
     "max": 11.6,
     "quality": "reported",
     "raw": "11.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.37,
     "max": 0.37,
     "quality": "reported",
     "raw": "0.37",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.32,
     "max": 0.32,
     "quality": "reported",
     "raw": "0.32",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.14/0.54/0.32 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts NW in the HiBMS FOV after deployment and ignition leaving the FOV just after visible flame extinction. The flame oscillates several cycles with nearly constant amplitude before radiatively extinguishing. The LLUV images are dim and the LLUV flame data is noisy as a result of the flame dimness and the contamination of the CIR LLUV viewing window.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.14/0.54/0.32 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts NW in the HiBMS FOV after deployment and ignition leaving the FOV just after visible flame extinction. The flame oscillates several cycles with nearly constant amplitude before radiatively extinguishing. The LLUV images are dim and the LLUV flame data is noisy as a result of the flame dimness and the contamination of the CIR LLUV viewing window.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-164_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.14/0.54/0.32 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts NW in the HiBMS FOV after deployment and ignition leaving the FOV just after visible flame extinction. The flame oscillates several cycles with nearly constant amplitude before radiatively extinguishing. The LLUV images are dim and the LLUV flame data is noisy as a result of the flame dimness and the contamination of the CIR LLUV viewing window.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-164_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.63,
     "max": 1.63,
     "quality": "reported",
     "raw": "1.63",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-164_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-164_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.53,
     "max": 0.53,
     "quality": "reported",
     "raw": "0.53",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.112,
     "max": 102.112,
     "quality": "reported",
     "raw": "765.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.59,
     "max": 2.59,
     "quality": "reported",
     "raw": "2.59",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-12-28",
     "quality": "reported",
     "raw": "12/28/10",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/164",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C06M401",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 164,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.93,
     "max": 26.93,
     "quality": "reported",
     "raw": "300.08",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-165_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.08",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-165_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8.9,
     "max": 8.9,
     "quality": "reported",
     "raw": "8.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.42,
     "max": 0.42,
     "quality": "reported",
     "raw": "0.42",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.32,
     "max": 0.32,
     "quality": "reported",
     "raw": "0.32",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.14/0.54/0.32 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition, leaving the droplet shortly after visible flame extinction and then back into the FOV well after extinction near the end of recording. This is a very dim flame with the LLUV data having a lot of noise because of the dimness and the contamination on the CIR LLUV viewing window.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.14/0.54/0.32 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition, leaving the droplet shortly after visible flame extinction and then back into the FOV well after extinction near the end of recording. This is a very dim flame with the LLUV data having a lot of noise because of the dimness and the contamination on the CIR LLUV viewing window.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-165_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.14/0.54/0.32 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition, leaving the droplet shortly after visible flame extinction and then back into the FOV well after extinction near the end of recording. This is a very dim flame with the LLUV data having a lot of noise because of the dimness and the contamination on the CIR LLUV viewing window.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-165_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.79,
     "max": 1.79,
     "quality": "reported",
     "raw": "1.79",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-165_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-165_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.53,
     "max": 0.53,
     "quality": "reported",
     "raw": "0.53",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.138,
     "max": 102.138,
     "quality": "reported",
     "raw": "766.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.59,
     "max": 2.59,
     "quality": "reported",
     "raw": "2.59",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-12-28",
     "quality": "reported",
     "raw": "12/28/10",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/165",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C03H302",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 165,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.21,
     "max": 27.21,
     "quality": "reported",
     "raw": "300.36",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-166_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.36",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-166_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 3.9,
     "max": 3.9,
     "quality": "reported",
     "raw": "3.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.54,
     "max": 0.54,
     "quality": "reported",
     "raw": "0.54",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.18/0.670.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts SE in the HiBMS FOV but remains in the FOV until the visible flame extinguishes and then drifts out. The flame gets dimmer as the burn progresses, but there are no flame oscillations before flame extinction or vapor cloud formation after visible flame extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.18/0.670.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts SE in the HiBMS FOV but remains in the FOV until the visible flame extinguishes and then drifts out. The flame gets dimmer as the burn progresses, but there are no flame oscillations before flame extinction or vapor cloud formation after visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-166_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.18/0.670.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts SE in the HiBMS FOV but remains in the FOV until the visible flame extinguishes and then drifts out. The flame gets dimmer as the burn progresses, but there are no flame oscillations before flame extinction or vapor cloud formation after visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-166_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.39,
     "max": 1.39,
     "quality": "reported",
     "raw": "1.39",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-166_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-166_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.045,
     "max": 102.045,
     "quality": "reported",
     "raw": "765.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.96,
     "max": 1.96,
     "quality": "reported",
     "raw": "1.96",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2010-12-09",
     "quality": "reported",
     "raw": "12/9/2010",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/166",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C07M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 166,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.57,
     "max": 25.57,
     "quality": "reported",
     "raw": "298.72",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-167_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.72",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-167_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 3.4,
     "max": 3.4,
     "quality": "reported",
     "raw": "3.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.28,
     "max": 0.28,
     "quality": "reported",
     "raw": "0.28",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.36,
     "max": 0.36,
     "quality": "reported",
     "raw": "0.36",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.14/0.50/0.36 O2/N2/CO2, 1.0 atm ambient environment. The droplet remains in the FOV of all cameras. This is a short burn to radiative extinction. The color camera IPSU did not record any images after deployment.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.14/0.50/0.36 O2/N2/CO2, 1.0 atm ambient environment. The droplet remains in the FOV of all cameras. This is a short burn to radiative extinction. The color camera IPSU did not record any images after deployment.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-167_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.14/0.50/0.36 O2/N2/CO2, 1.0 atm ambient environment. The droplet remains in the FOV of all cameras. This is a short burn to radiative extinction. The color camera IPSU did not record any images after deployment.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-167_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.08,
     "max": 3.08,
     "quality": "reported",
     "raw": "3.08",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-167_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-167_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.14,
     "max": 0.14,
     "quality": "reported",
     "raw": "0.14",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.432,
     "max": 101.432,
     "quality": "reported",
     "raw": "760.8",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.22,
     "max": 3.22,
     "quality": "reported",
     "raw": "3.22",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-01-12",
     "quality": "reported",
     "raw": "1/12/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/167",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C07M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 167,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.77,
     "max": 25.77,
     "quality": "reported",
     "raw": "298.92",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-168_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.92",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-168_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 5.9,
     "max": 5.9,
     "quality": "reported",
     "raw": "5.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.37,
     "max": 0.37,
     "quality": "reported",
     "raw": "0.37",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.36,
     "max": 0.36,
     "quality": "reported",
     "raw": "0.36",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.136/0.50/0.363 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts W in the HiBMS FOV after deployment hits the igniter and then drifts slowly E after ignition. It leaves the HIBMS FOV shortly after visible flame extinction. The LLUV images are very dim which when combined with the contamination on the CIR LLUV viewing window results in a lot of noise in the data. This flame oscillates for nearly half the lifetime.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.136/0.50/0.363 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts W in the HiBMS FOV after deployment hits the igniter and then drifts slowly E after ignition. It leaves the HIBMS FOV shortly after visible flame extinction. The LLUV images are very dim which when combined with the contamination on the CIR LLUV viewing window results in a lot of noise in the data. This flame oscillates for nearly half the lifetime.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-168_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.136/0.50/0.363 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts W in the HiBMS FOV after deployment hits the igniter and then drifts slowly E after ignition. It leaves the HIBMS FOV shortly after visible flame extinction. The LLUV images are very dim which when combined with the contamination on the CIR LLUV viewing window results in a lot of noise in the data. This flame oscillates for nearly half the lifetime.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-168_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.84,
     "max": 1.84,
     "quality": "reported",
     "raw": "1.84",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-168_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-168_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.14,
     "max": 0.14,
     "quality": "reported",
     "raw": "0.14",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.538,
     "max": 101.538,
     "quality": "reported",
     "raw": "761.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.32,
     "max": 2.32,
     "quality": "reported",
     "raw": "2.32",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-01-12",
     "quality": "reported",
     "raw": "1/12/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/168",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C15M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 168,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.38,
     "max": 26.38,
     "quality": "reported",
     "raw": "299.53",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-169_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.53",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-169_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 15.6,
     "max": 15.6,
     "quality": "reported",
     "raw": "15.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.48,
     "max": 0.48,
     "quality": "reported",
     "raw": "0.48",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.21/0.64/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition. It drifts around the HiBMS FOV slightly and then disrupts coincident with flame extinction. The extinction droplet diameter is the droplet diameter at disruption and not the true extinction droplet diameter.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.21/0.64/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition. It drifts around the HiBMS FOV slightly and then disrupts coincident with flame extinction. The extinction droplet diameter is the droplet diameter at disruption and not the true extinction droplet diameter.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-169_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.21/0.64/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition. It drifts around the HiBMS FOV slightly and then disrupts coincident with flame extinction. The extinction droplet diameter is the droplet diameter at disruption and not the true extinction droplet diameter.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-169_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.57,
     "max": 1.57,
     "quality": "reported",
     "raw": "1.57",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-169_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-169_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.64,
     "max": 0.64,
     "quality": "reported",
     "raw": "0.64",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.778,
     "max": 101.778,
     "quality": "reported",
     "raw": "763.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.03,
     "max": 3.03,
     "quality": "reported",
     "raw": "3.03",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-01-18",
     "quality": "reported",
     "raw": "1/18/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/169",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C15M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 169,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.09,
     "max": 27.09,
     "quality": "reported",
     "raw": "300.24",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-170_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.24",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-170_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 16.7,
     "max": 16.7,
     "quality": "reported",
     "raw": "16.7",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.51,
     "max": 0.51,
     "quality": "reported",
     "raw": "0.51",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.21/0.64/0.16 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition. The droplet leaves the HiBMS FOV 3/4ths of the way through the burn and then back into the FOV just after visible flame extinction. The extinction droplet diameter is the droplet diameter when the droplet fully re-appears in the FOV and should be nearly identical to the droplet diameter when the visible flame extinguishes.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.21/0.64/0.16 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition. The droplet leaves the HiBMS FOV 3/4ths of the way through the burn and then back into the FOV just after visible flame extinction. The extinction droplet diameter is the droplet diameter when the droplet fully re-appears in the FOV and should be nearly identical to the droplet diameter when the visible flame extinguishes.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-170_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.21/0.64/0.16 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition. The droplet leaves the HiBMS FOV 3/4ths of the way through the burn and then back into the FOV just after visible flame extinction. The extinction droplet diameter is the droplet diameter when the droplet fully re-appears in the FOV and should be nearly identical to the droplet diameter when the visible flame extinguishes.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-170_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.28,
     "max": 1.28,
     "quality": "reported",
     "raw": "1.28",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-170_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-170_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.64,
     "max": 0.64,
     "quality": "reported",
     "raw": "0.64",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.138,
     "max": 102.138,
     "quality": "reported",
     "raw": "766.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.05,
     "max": 3.05,
     "quality": "reported",
     "raw": "3.05",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-01-18",
     "quality": "reported",
     "raw": "1/18/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/170",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C15M301",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 170,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.4,
     "max": 27.4,
     "quality": "reported",
     "raw": "300.55",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-171_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.55",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-171_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 23.6,
     "max": 23.6,
     "quality": "reported",
     "raw": "23.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.46,
     "max": 0.46,
     "quality": "reported",
     "raw": "0.46",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.21/0.64/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition and out of HiBMS FOV about 1/2 way through the burn. The droplet then drifts back in shortly after diffusive extinction. The extinction droplet diameter results from a cubic polynomial fit of the droplet history between the two times that the droplet is within the HiBMS FOV (subject to the constraint that the slope of the droplet history of the fit is equal to that of the experiment just before it leaves and after it returns to the FOV).",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.21/0.64/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition and out of HiBMS FOV about 1/2 way through the burn. The droplet then drifts back in shortly after diffusive extinction. The extinction droplet diameter results from a cubic polynomial fit of the droplet history between the two times that the droplet is within the HiBMS FOV (subject to the constraint that the slope of the droplet history of the fit is equal to that of the experiment just before it leaves and after it returns to the FOV).",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-171_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.21/0.64/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition and out of HiBMS FOV about 1/2 way through the burn. The droplet then drifts back in shortly after diffusive extinction. The extinction droplet diameter results from a cubic polynomial fit of the droplet history between the two times that the droplet is within the HiBMS FOV (subject to the constraint that the slope of the droplet history of the fit is equal to that of the experiment just before it leaves and after it returns to the FOV).",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-171_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.59,
     "max": 1.59,
     "quality": "reported",
     "raw": "1.59",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-171_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-171_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.64,
     "max": 0.64,
     "quality": "reported",
     "raw": "0.64",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.218,
     "max": 102.218,
     "quality": "reported",
     "raw": "766.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.53,
     "max": 3.53,
     "quality": "reported",
     "raw": "3.53",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-01-18",
     "quality": "reported",
     "raw": "1/18/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/171",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C03H501",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 171,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.31,
     "max": 26.31,
     "quality": "reported",
     "raw": "299.46",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-172_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.46",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-172_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 2.8,
     "max": 2.8,
     "quality": "reported",
     "raw": "2.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. This is the first test after the needle and window change-out (cleaner window for the LLUV). The droplet stays within the HiBMS FOV for the entire test with very little residual motion. The LLUV image is very bright with none of the asymetry as observed in the previous tests. The flame extinguishes at a relatively large droplet size and the droplet continuts to vaporize at a relatively high and nearly constant rate after visible flame extinction. This is indicative of cool flame burning and extinction after visible-flame extinction. The color camera IPSU did not record any images after deployment.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. This is the first test after the needle and window change-out (cleaner window for the LLUV). The droplet stays within the HiBMS FOV for the entire test with very little residual motion. The LLUV image is very bright with none of the asymetry as observed in the previous tests. The flame extinguishes at a relatively large droplet size and the droplet continuts to vaporize at a relatively high and nearly constant rate after visible flame extinction. This is indicative of cool flame burning and extinction after visible-flame extinction. The color camera IPSU did not record any images after deployment.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-172_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. This is the first test after the needle and window change-out (cleaner window for the LLUV). The droplet stays within the HiBMS FOV for the entire test with very little residual motion. The LLUV image is very bright with none of the asymetry as observed in the previous tests. The flame extinguishes at a relatively large droplet size and the droplet continuts to vaporize at a relatively high and nearly constant rate after visible flame extinction. This is indicative of cool flame burning and extinction after visible-flame extinction. The color camera IPSU did not record any images after deployment.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-172_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.68,
     "max": 3.68,
     "quality": "reported",
     "raw": "3.68",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-172_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-172_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.312,
     "max": 101.312,
     "quality": "reported",
     "raw": "759.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.74,
     "max": 3.74,
     "quality": "reported",
     "raw": "3.74",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-02-21",
     "quality": "reported",
     "raw": "2/21/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/172",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C03H601",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 172,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.76,
     "max": 26.76,
     "quality": "reported",
     "raw": "299.91",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-173_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.91",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-173_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 4.4,
     "max": 4.4,
     "quality": "reported",
     "raw": "4.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.46,
     "max": 0.46,
     "quality": "reported",
     "raw": "0.46",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet stayed in the HiBMS FOV the entire test. The LLUV provided good distortion free and bright images. The flame radiatively extinguished. The visible flame extinction was followed by rapid vaporization, then plateau when the droplet became quite small. There was a visible vapor cloud formation late in the recording history. The post visible flame extinction behavior is consistent with cool flame burning and extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet stayed in the HiBMS FOV the entire test. The LLUV provided good distortion free and bright images. The flame radiatively extinguished. The visible flame extinction was followed by rapid vaporization, then plateau when the droplet became quite small. There was a visible vapor cloud formation late in the recording history. The post visible flame extinction behavior is consistent with cool flame burning and extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-173_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet stayed in the HiBMS FOV the entire test. The LLUV provided good distortion free and bright images. The flame radiatively extinguished. The visible flame extinction was followed by rapid vaporization, then plateau when the droplet became quite small. There was a visible vapor cloud formation late in the recording history. The post visible flame extinction behavior is consistent with cool flame burning and extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-173_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.96,
     "max": 1.96,
     "quality": "reported",
     "raw": "1.96",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-173_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-173_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.592,
     "max": 101.592,
     "quality": "reported",
     "raw": "762",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.4,
     "max": 2.4,
     "quality": "reported",
     "raw": "2.4",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-02-21",
     "quality": "reported",
     "raw": "2/21/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/173",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C03H701",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 173,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.9,
     "max": 26.9,
     "quality": "reported",
     "raw": "300.05",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-174_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.05",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-174_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 3.6,
     "max": 3.6,
     "quality": "reported",
     "raw": "3.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. This is very small heptane droplet. It drifts S in the HiBMS FOV after deployment and ignition, but stays in the FOV the entire recording time. The droplet burns with a relatively bright flame to a very small size where there is a small disruption that is coincident with visible flame extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. This is very small heptane droplet. It drifts S in the HiBMS FOV after deployment and ignition, but stays in the FOV the entire recording time. The droplet burns with a relatively bright flame to a very small size where there is a small disruption that is coincident with visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-174_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. This is very small heptane droplet. It drifts S in the HiBMS FOV after deployment and ignition, but stays in the FOV the entire recording time. The droplet burns with a relatively bright flame to a very small size where there is a small disruption that is coincident with visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-174_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.47,
     "max": 0.47,
     "quality": "reported",
     "raw": "0.47",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-174_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-174_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.605,
     "max": 101.605,
     "quality": "reported",
     "raw": "762.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.35,
     "max": 1.35,
     "quality": "reported",
     "raw": "1.35",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-02-21",
     "quality": "reported",
     "raw": "2/21/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/174",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C08H502",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 174,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.41,
     "max": 27.41,
     "quality": "reported",
     "raw": "300.56",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-175_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.56",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-175_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 11.2,
     "max": 11.2,
     "quality": "reported",
     "raw": "11.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts E, but stays in HiBMS FOV for the entire test. The droplet burns linearly to small size and there is disruption coincident with flame extinction. The extinction droplet size is just an extrapolation of the average burning rate to the time of extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts E, but stays in HiBMS FOV for the entire test. The droplet burns linearly to small size and there is disruption coincident with flame extinction. The extinction droplet size is just an extrapolation of the average burning rate to the time of extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-175_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts E, but stays in HiBMS FOV for the entire test. The droplet burns linearly to small size and there is disruption coincident with flame extinction. The extinction droplet size is just an extrapolation of the average burning rate to the time of extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-175_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-175_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-175_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.24,
     "max": 0.24,
     "quality": "reported",
     "raw": "0.24",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.8875,
     "max": 70.8875,
     "quality": "reported",
     "raw": "531.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.5,
     "max": 2.5,
     "quality": "reported",
     "raw": "2.5",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-02-21",
     "quality": "reported",
     "raw": "2/21/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/175",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C08H601",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 175,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.44,
     "max": 27.44,
     "quality": "reported",
     "raw": "300.59",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-176_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.59",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-176_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 15.6,
     "max": 15.6,
     "quality": "reported",
     "raw": "15.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.55,
     "max": 0.55,
     "quality": "reported",
     "raw": "0.55",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts slowly NE in the HiBMS FOV after deployment and ignition and out of the FOV a little over half way through the test. The droplet burns to a small size and then disrupts. Extrapolating the droplet history to the time of extinction shows that the droplet had almost completely vaporized when it disrupted ending the test. The color camera IPSU did not record any images after deployment.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts slowly NE in the HiBMS FOV after deployment and ignition and out of the FOV a little over half way through the test. The droplet burns to a small size and then disrupts. Extrapolating the droplet history to the time of extinction shows that the droplet had almost completely vaporized when it disrupted ending the test. The color camera IPSU did not record any images after deployment.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-176_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts slowly NE in the HiBMS FOV after deployment and ignition and out of the FOV a little over half way through the test. The droplet burns to a small size and then disrupts. Extrapolating the droplet history to the time of extinction shows that the droplet had almost completely vaporized when it disrupted ending the test. The color camera IPSU did not record any images after deployment.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-176_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-176_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-176_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.24,
     "max": 0.24,
     "quality": "reported",
     "raw": "0.24",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.9408,
     "max": 70.9408,
     "quality": "reported",
     "raw": "532.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.88,
     "max": 2.88,
     "quality": "reported",
     "raw": "2.88",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-02-21",
     "quality": "reported",
     "raw": "2/21/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/176",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C08M501",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 176,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.47,
     "max": 26.47,
     "quality": "reported",
     "raw": "299.62",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-177_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.62",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-177_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 38.2,
     "max": 38.2,
     "quality": "reported",
     "raw": "38.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.46,
     "max": 0.46,
     "quality": "reported",
     "raw": "0.46",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.7 atm ambient environment. There is almost no drift and the droplet remains in HiBMS FOV for the entire test. The HiBMS recording stops before burn is complete and the droplet drifted out of the LLUV FOV before the end of the test. The color camera IPSU did not record any images after deployment.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.7 atm ambient environment. There is almost no drift and the droplet remains in HiBMS FOV for the entire test. The HiBMS recording stops before burn is complete and the droplet drifted out of the LLUV FOV before the end of the test. The color camera IPSU did not record any images after deployment.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-177_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.7 atm ambient environment. There is almost no drift and the droplet remains in HiBMS FOV for the entire test. The HiBMS recording stops before burn is complete and the droplet drifted out of the LLUV FOV before the end of the test. The color camera IPSU did not record any images after deployment.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-177_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-177_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-177_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.24,
     "max": 0.24,
     "quality": "reported",
     "raw": "0.24",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.5808,
     "max": 71.5808,
     "quality": "reported",
     "raw": "536.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 4.53,
     "max": 4.53,
     "quality": "reported",
     "raw": "4.53",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-04-18",
     "quality": "reported",
     "raw": "4/18/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/177",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C08M601",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 177,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.68,
     "max": 26.68,
     "quality": "reported",
     "raw": "299.83",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-178_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.83",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-178_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 14.5,
     "max": 14.5,
     "quality": "reported",
     "raw": "14.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. The droplet stays in the HiBMS and LLUV FOVs for entire test. The color camera IPSU did not record any images after deployment. The flame diffusively extinguished with no disruption.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. The droplet stays in the HiBMS and LLUV FOVs for entire test. The color camera IPSU did not record any images after deployment. The flame diffusively extinguished with no disruption.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-178_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.24/0.56/0.20 O2/N2/CO2, 0.70 atm ambient environment. The droplet stays in the HiBMS and LLUV FOVs for entire test. The color camera IPSU did not record any images after deployment. The flame diffusively extinguished with no disruption.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-178_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.35,
     "max": 1.35,
     "quality": "reported",
     "raw": "1.35",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-178_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-178_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.24,
     "max": 0.24,
     "quality": "reported",
     "raw": "0.24",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.5941,
     "max": 71.5941,
     "quality": "reported",
     "raw": "537",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.02,
     "max": 3.02,
     "quality": "reported",
     "raw": "3.02",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-04-18",
     "quality": "reported",
     "raw": "4/18/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/178",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C09H501",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 178,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.17,
     "max": 26.17,
     "quality": "reported",
     "raw": "299.32",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-179_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.32",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-179_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8.9,
     "max": 8.9,
     "quality": "reported",
     "raw": "8.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.7 atm ambient environment. The droplet drifts slowly E in the HiBMS FOV, but stays within the HiBMS FOV for the entire recording time (including post-extinction). There is some rapid post-extinction vaporization, but not as pronounced as other heptane tests, followed by a plateau in the droplet history. The flame radiatively extinguishes, and is likely followed by a cool flame and cool flame extinction. The Color Camera IPSU-4 failed to record any images after deployment.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.7 atm ambient environment. The droplet drifts slowly E in the HiBMS FOV, but stays within the HiBMS FOV for the entire recording time (including post-extinction). There is some rapid post-extinction vaporization, but not as pronounced as other heptane tests, followed by a plateau in the droplet history. The flame radiatively extinguishes, and is likely followed by a cool flame and cool flame extinction. The Color Camera IPSU-4 failed to record any images after deployment.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-179_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.7 atm ambient environment. The droplet drifts slowly E in the HiBMS FOV, but stays within the HiBMS FOV for the entire recording time (including post-extinction). There is some rapid post-extinction vaporization, but not as pronounced as other heptane tests, followed by a plateau in the droplet history. The flame radiatively extinguishes, and is likely followed by a cool flame and cool flame extinction. The Color Camera IPSU-4 failed to record any images after deployment.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-179_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.61,
     "max": 2.61,
     "quality": "reported",
     "raw": "2.61",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-179_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-179_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.23,
     "max": 0.23,
     "quality": "reported",
     "raw": "0.23",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.1408,
     "max": 71.1408,
     "quality": "reported",
     "raw": "533.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.32,
     "max": 3.32,
     "quality": "reported",
     "raw": "3.32",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-04-20",
     "quality": "reported",
     "raw": "4/20/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/179",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C09H601",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 179,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.45,
     "max": 26.45,
     "quality": "reported",
     "raw": "299.60",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-180_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.60",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-180_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 7.5,
     "max": 7.5,
     "quality": "reported",
     "raw": "7.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.57,
     "max": 0.57,
     "quality": "reported",
     "raw": "0.57",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.7 atm ambient environment. A smaller droplet that stays in the HiBMS FOV for the entiore test. The droplet disrupts at a very small droplet size that is coincident with visible flame extinction. The extinction droplet size is the droplet size just before the disruption.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.7 atm ambient environment. A smaller droplet that stays in the HiBMS FOV for the entiore test. The droplet disrupts at a very small droplet size that is coincident with visible flame extinction. The extinction droplet size is the droplet size just before the disruption.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-180_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.7 atm ambient environment. A smaller droplet that stays in the HiBMS FOV for the entiore test. The droplet disrupts at a very small droplet size that is coincident with visible flame extinction. The extinction droplet size is the droplet size just before the disruption.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-180_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.48,
     "max": 0.48,
     "quality": "reported",
     "raw": "0.48",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-180_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-180_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.23,
     "max": 0.23,
     "quality": "reported",
     "raw": "0.23",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.2475,
     "max": 71.2475,
     "quality": "reported",
     "raw": "534.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.07,
     "max": 2.07,
     "quality": "reported",
     "raw": "2.07",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-04-20",
     "quality": "reported",
     "raw": "4/20/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/180",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C02H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 180,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27,
     "max": 27,
     "quality": "reported",
     "raw": "300.15",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-181_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.15",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-181_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 4.5,
     "max": 4.5,
     "quality": "reported",
     "raw": "4.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.41,
     "max": 0.41,
     "quality": "reported",
     "raw": "0.41",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.1,
     "max": 0.1,
     "quality": "reported",
     "raw": "0.1",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.19/0.71/0.10 O2/N2/CO2, 0.7 atm ambient environment. The droplet stays in HiBMS FOV for the entire test, including a large period of time after visible flame extinction. The droplet flame has a radiative extinction at a relatively large droplet size. After visible flame extinction there is rapid and nearly constant vaporization of the droplet, followed by a vapor cloud formation and plateau in the droplet history. The post visible-flame vaporization and plateau are indicative of cool flame burning and extinction, respectively. The Color Camera IPSU-4 did not record any video after deployment.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.19/0.71/0.10 O2/N2/CO2, 0.7 atm ambient environment. The droplet stays in HiBMS FOV for the entire test, including a large period of time after visible flame extinction. The droplet flame has a radiative extinction at a relatively large droplet size. After visible flame extinction there is rapid and nearly constant vaporization of the droplet, followed by a vapor cloud formation and plateau in the droplet history. The post visible-flame vaporization and plateau are indicative of cool flame burning and extinction, respectively. The Color Camera IPSU-4 did not record any video after deployment.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-181_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.19/0.71/0.10 O2/N2/CO2, 0.7 atm ambient environment. The droplet stays in HiBMS FOV for the entire test, including a large period of time after visible flame extinction. The droplet flame has a radiative extinction at a relatively large droplet size. After visible flame extinction there is rapid and nearly constant vaporization of the droplet, followed by a vapor cloud formation and plateau in the droplet history. The post visible-flame vaporization and plateau are indicative of cool flame burning and extinction, respectively. The Color Camera IPSU-4 did not record any video after deployment.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-181_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.13,
     "max": 3.13,
     "quality": "reported",
     "raw": "3.13",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-181_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-181_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.71,
     "max": 0.71,
     "quality": "reported",
     "raw": "0.71",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.19,
     "max": 0.19,
     "quality": "reported",
     "raw": "0.19",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.112,
     "max": 101.112,
     "quality": "reported",
     "raw": "758.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.4,
     "max": 3.4,
     "quality": "reported",
     "raw": "3.4",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-04-20",
     "quality": "reported",
     "raw": "4/20/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/181",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C02H201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 181,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.21,
     "max": 27.21,
     "quality": "reported",
     "raw": "300.36",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-182_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.36",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-182_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 7,
     "max": 7,
     "quality": "reported",
     "raw": "7",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.1,
     "max": 0.1,
     "quality": "reported",
     "raw": "0.1",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.19/0.71/0.10 O2/N2/CO2, 0.7 atm ambient environment. The droplet stays in HiBMS FOV for the entire test including after the visible flame extinction. The flame has a radiative extinction followed by rapid vaporization and then a plateau late in the test time. The plateau is coincident with vapor cloud formation. Both the post visible-flame extinction behavior and plateau in the droplet history are indicative of cool flame burning and extinction, respectively.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.19/0.71/0.10 O2/N2/CO2, 0.7 atm ambient environment. The droplet stays in HiBMS FOV for the entire test including after the visible flame extinction. The flame has a radiative extinction followed by rapid vaporization and then a plateau late in the test time. The plateau is coincident with vapor cloud formation. Both the post visible-flame extinction behavior and plateau in the droplet history are indicative of cool flame burning and extinction, respectively.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-182_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.19/0.71/0.10 O2/N2/CO2, 0.7 atm ambient environment. The droplet stays in HiBMS FOV for the entire test including after the visible flame extinction. The flame has a radiative extinction followed by rapid vaporization and then a plateau late in the test time. The plateau is coincident with vapor cloud formation. Both the post visible-flame extinction behavior and plateau in the droplet history are indicative of cool flame burning and extinction, respectively.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-182_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.68,
     "max": 1.68,
     "quality": "reported",
     "raw": "1.68",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-182_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-182_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.71,
     "max": 0.71,
     "quality": "reported",
     "raw": "0.71",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.19,
     "max": 0.19,
     "quality": "reported",
     "raw": "0.19",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.205,
     "max": 101.205,
     "quality": "reported",
     "raw": "759.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.48,
     "max": 2.48,
     "quality": "reported",
     "raw": "2.48",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-04-20",
     "quality": "reported",
     "raw": "4/20/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/182",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C02H202",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 182,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.35,
     "max": 27.35,
     "quality": "reported",
     "raw": "300.50",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-183_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.50",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-183_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 5.1,
     "max": 5.1,
     "quality": "reported",
     "raw": "5.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.54,
     "max": 0.54,
     "quality": "reported",
     "raw": "0.54",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.1,
     "max": 0.1,
     "quality": "reported",
     "raw": "0.1",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.19/0.71/0.10 O2/N2/CO2, 0.7 atm ambient environment. This is a small droplet that stays in HiBMS FOV for the entire test. The droplet burns to a very small size where it disrupts before the droplet vanishes. The extinction droplet diameter is the droplet size just prior to the disruption.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.19/0.71/0.10 O2/N2/CO2, 0.7 atm ambient environment. This is a small droplet that stays in HiBMS FOV for the entire test. The droplet burns to a very small size where it disrupts before the droplet vanishes. The extinction droplet diameter is the droplet size just prior to the disruption.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-183_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.19/0.71/0.10 O2/N2/CO2, 0.7 atm ambient environment. This is a small droplet that stays in HiBMS FOV for the entire test. The droplet burns to a very small size where it disrupts before the droplet vanishes. The extinction droplet diameter is the droplet size just prior to the disruption.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-183_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-183_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-183_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.71,
     "max": 0.71,
     "quality": "reported",
     "raw": "0.71",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.19,
     "max": 0.19,
     "quality": "reported",
     "raw": "0.19",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.192,
     "max": 101.192,
     "quality": "reported",
     "raw": "759",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.64,
     "max": 1.64,
     "quality": "reported",
     "raw": "1.64",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-04-20",
     "quality": "reported",
     "raw": "4/20/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/183",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C09M501",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 183,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.83,
     "max": 25.83,
     "quality": "reported",
     "raw": "298.98",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-184_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.98",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-184_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 26.2,
     "max": 26.2,
     "quality": "reported",
     "raw": "26.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.53,
     "max": 0.53,
     "quality": "reported",
     "raw": "0.53",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts S and out of the HiBMS and color camera FOVs relatively quickly after ignition. It remains in the LLUV FOV for the entire test. The droplet burns for a long time before diffusive extinction.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts S and out of the HiBMS and color camera FOVs relatively quickly after ignition. It remains in the LLUV FOV for the entire test. The droplet burns for a long time before diffusive extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-184_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts S and out of the HiBMS and color camera FOVs relatively quickly after ignition. It remains in the LLUV FOV for the entire test. The droplet burns for a long time before diffusive extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-184_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-184_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-184_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.23,
     "max": 0.23,
     "quality": "reported",
     "raw": "0.23",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.2475,
     "max": 71.2475,
     "quality": "reported",
     "raw": "534.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.72,
     "max": 3.72,
     "quality": "reported",
     "raw": "3.72",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-08",
     "quality": "reported",
     "raw": "8/8/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/184",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C09M502",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 184,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.01,
     "max": 26.01,
     "quality": "reported",
     "raw": "299.16",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-185_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.16",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-185_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 15.8,
     "max": 15.8,
     "quality": "reported",
     "raw": "15.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.51,
     "max": 0.51,
     "quality": "reported",
     "raw": "0.51",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.70/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts S after deployment, hits the igniter and then drifts E slowly. It leaves the HiBMS, LLUV and Color Camera FOVs before flame extinction.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.70/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts S after deployment, hits the igniter and then drifts E slowly. It leaves the HiBMS, LLUV and Color Camera FOVs before flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-185_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.70/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts S after deployment, hits the igniter and then drifts E slowly. It leaves the HiBMS, LLUV and Color Camera FOVs before flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-185_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-185_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-185_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.23,
     "max": 0.23,
     "quality": "reported",
     "raw": "0.23",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.3408,
     "max": 71.3408,
     "quality": "reported",
     "raw": "535.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.42,
     "max": 3.42,
     "quality": "reported",
     "raw": "3.42",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-08",
     "quality": "reported",
     "raw": "8/8/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/185",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C09M601",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 185,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.13,
     "max": 26.13,
     "quality": "reported",
     "raw": "299.28",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-186_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.28",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-186_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 12.7,
     "max": 12.7,
     "quality": "reported",
     "raw": "12.7",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.51,
     "max": 0.51,
     "quality": "reported",
     "raw": "0.51",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition, goes to the end of the FOV, then drifts W briefly and then back N, never leaving the FOV of any of the cameras. The flame diffusively extinguishes.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition, goes to the end of the FOV, then drifts W briefly and then back N, never leaving the FOV of any of the cameras. The flame diffusively extinguishes.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-186_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition, goes to the end of the FOV, then drifts W briefly and then back N, never leaving the FOV of any of the cameras. The flame diffusively extinguishes.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-186_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.33,
     "max": 1.33,
     "quality": "reported",
     "raw": "1.33",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-186_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-186_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.23,
     "max": 0.23,
     "quality": "reported",
     "raw": "0.23",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.3541,
     "max": 71.3541,
     "quality": "reported",
     "raw": "535.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.8,
     "max": 2.8,
     "quality": "reported",
     "raw": "2.8",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-08",
     "quality": "reported",
     "raw": "8/8/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/186",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C09M701",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 186,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.63,
     "max": 26.63,
     "quality": "reported",
     "raw": "299.78",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-187_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.78",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-187_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 9.2,
     "max": 9.2,
     "quality": "reported",
     "raw": "9.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet deploys and ignites with almost no residual motion and stays in the FOVs of all the cameras for the entire test. The flame diffusively extinguishes",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet deploys and ignites with almost no residual motion and stays in the FOVs of all the cameras for the entire test. The flame diffusively extinguishes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-187_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.23/0.52/0.25 O2/N2/CO2, 0.70 atm ambient environment. The droplet deploys and ignites with almost no residual motion and stays in the FOVs of all the cameras for the entire test. The flame diffusively extinguishes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-187_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.21,
     "max": 1.21,
     "quality": "reported",
     "raw": "1.21",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-187_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-187_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.23,
     "max": 0.23,
     "quality": "reported",
     "raw": "0.23",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.4875,
     "max": 71.4875,
     "quality": "reported",
     "raw": "536.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.47,
     "max": 2.47,
     "quality": "reported",
     "raw": "2.47",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-08",
     "quality": "reported",
     "raw": "8/8/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/187",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C02M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 187,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.96,
     "max": 26.96,
     "quality": "reported",
     "raw": "300.11",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-188_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.11",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-188_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 21.8,
     "max": 21.8,
     "quality": "reported",
     "raw": "21.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.47,
     "max": 0.47,
     "quality": "reported",
     "raw": "0.47",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.1,
     "max": 0.1,
     "quality": "reported",
     "raw": "0.1",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.19/0.71/0.10 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts E and then SE and out of the HiBMS FOV about 1/3 of the way through the test. This was a very long burn with likely diffusive extinction. There was no disruption at extinction. There is no extinction droplet diameter reported because the droplet was in the HiBMS FOV for only a small fraction of the entire burn.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.19/0.71/0.10 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts E and then SE and out of the HiBMS FOV about 1/3 of the way through the test. This was a very long burn with likely diffusive extinction. There was no disruption at extinction. There is no extinction droplet diameter reported because the droplet was in the HiBMS FOV for only a small fraction of the entire burn.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-188_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.19/0.71/0.10 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts E and then SE and out of the HiBMS FOV about 1/3 of the way through the test. This was a very long burn with likely diffusive extinction. There was no disruption at extinction. There is no extinction droplet diameter reported because the droplet was in the HiBMS FOV for only a small fraction of the entire burn.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-188_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.29,
     "max": 1.29,
     "quality": "reported",
     "raw": "1.29",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-188_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-188_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.71,
     "max": 0.71,
     "quality": "reported",
     "raw": "0.71",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.19,
     "max": 0.19,
     "quality": "reported",
     "raw": "0.19",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.058,
     "max": 101.058,
     "quality": "reported",
     "raw": "758",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.38,
     "max": 3.38,
     "quality": "reported",
     "raw": "3.38",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-08",
     "quality": "reported",
     "raw": "8/8/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/188",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C02M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 188,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.13,
     "max": 27.13,
     "quality": "reported",
     "raw": "300.28",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-189_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.28",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-189_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 11,
     "max": 11,
     "quality": "reported",
     "raw": "11",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.46,
     "max": 0.46,
     "quality": "reported",
     "raw": "0.46",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.1,
     "max": 0.1,
     "quality": "reported",
     "raw": "0.1",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.19/0.71/0.10 O2/N2/CO2, 1.0 atm ambient enviornment. The droplet drifts S in the HiBMS FOV and leaves the FOV immediately after visible flame extinction. It remains in the FOV of all the cameras for the entire burn that ends with diffusive extinction.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.19/0.71/0.10 O2/N2/CO2, 1.0 atm ambient enviornment. The droplet drifts S in the HiBMS FOV and leaves the FOV immediately after visible flame extinction. It remains in the FOV of all the cameras for the entire burn that ends with diffusive extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-189_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.19/0.71/0.10 O2/N2/CO2, 1.0 atm ambient enviornment. The droplet drifts S in the HiBMS FOV and leaves the FOV immediately after visible flame extinction. It remains in the FOV of all the cameras for the entire burn that ends with diffusive extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-189_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.08,
     "max": 1.08,
     "quality": "reported",
     "raw": "1.08",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-189_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-189_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.71,
     "max": 0.71,
     "quality": "reported",
     "raw": "0.71",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.19,
     "max": 0.19,
     "quality": "reported",
     "raw": "0.19",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.072,
     "max": 101.072,
     "quality": "reported",
     "raw": "758.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.47,
     "max": 2.47,
     "quality": "reported",
     "raw": "2.47",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-08",
     "quality": "reported",
     "raw": "8/8/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/189",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C03M501",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 189,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 24.74,
     "max": 24.74,
     "quality": "reported",
     "raw": "297.89",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-190_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 297.89",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-190_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 30.5,
     "max": 30.5,
     "quality": "reported",
     "raw": "30.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.42,
     "max": 0.42,
     "quality": "reported",
     "raw": "0.42",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts E after deployment and ignition and out of HiBMS FOV before extinction. It then drifts briefly back in the HiBMS FOV immediately after flame extinction. The color camera IPSUdid not record any images after deployment. The droplet drifted partially out of the LLUV FOV for a portion of the burn (resulting in more scatter in the flame size measurement). The extinction droplet diameter is estimated by interpolating the droplet history with a cubic polynomial from the known and measured droplet size and burning rate in the segments of the droplet history just before it left the HiBMS FOV and after it re-entered the FOV.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts E after deployment and ignition and out of HiBMS FOV before extinction. It then drifts briefly back in the HiBMS FOV immediately after flame extinction. The color camera IPSUdid not record any images after deployment. The droplet drifted partially out of the LLUV FOV for a portion of the burn (resulting in more scatter in the flame size measurement). The extinction droplet diameter is estimated by interpolating the droplet history with a cubic polynomial from the known and measured droplet size and burning rate in the segments of the droplet history just before it left the HiBMS FOV and after it re-entered the FOV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-190_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts E after deployment and ignition and out of HiBMS FOV before extinction. It then drifts briefly back in the HiBMS FOV immediately after flame extinction. The color camera IPSUdid not record any images after deployment. The droplet drifted partially out of the LLUV FOV for a portion of the burn (resulting in more scatter in the flame size measurement). The extinction droplet diameter is estimated by interpolating the droplet history with a cubic polynomial from the known and measured droplet size and burning rate in the segments of the droplet history just before it left the HiBMS FOV and after it re-entered the FOV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-190_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.78,
     "max": 1.78,
     "quality": "reported",
     "raw": "1.78",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-190_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-190_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.485,
     "max": 101.485,
     "quality": "reported",
     "raw": "761.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.77,
     "max": 3.77,
     "quality": "reported",
     "raw": "3.77",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-09",
     "quality": "reported",
     "raw": "8/9/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/190",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C03M601",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 190,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.03,
     "max": 26.03,
     "quality": "reported",
     "raw": "299.18",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-191_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.18",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-191_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 14,
     "max": 14,
     "quality": "reported",
     "raw": "14",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet deployed and ignited with very little residual motion, but then started to drift S in the HiBMS FOV after a few seconds after the igniters retracted. The droplet remained in the LLUV and color camera FOVs for the entire burn. The extinction droplet size is estimated by extrapolating the droplet history from the time the droplet leaves the HiBMS FOV until the time of extinction as determined by the LLUV and Color Cameras using the average burning rate constant.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet deployed and ignited with very little residual motion, but then started to drift S in the HiBMS FOV after a few seconds after the igniters retracted. The droplet remained in the LLUV and color camera FOVs for the entire burn. The extinction droplet size is estimated by extrapolating the droplet history from the time the droplet leaves the HiBMS FOV until the time of extinction as determined by the LLUV and Color Cameras using the average burning rate constant.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-191_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. The droplet deployed and ignited with very little residual motion, but then started to drift S in the HiBMS FOV after a few seconds after the igniters retracted. The droplet remained in the LLUV and color camera FOVs for the entire burn. The extinction droplet size is estimated by extrapolating the droplet history from the time the droplet leaves the HiBMS FOV until the time of extinction as determined by the LLUV and Color Cameras using the average burning rate constant.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-191_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.95,
     "max": 0.95,
     "quality": "reported",
     "raw": "0.95",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-191_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-191_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.938,
     "max": 101.938,
     "quality": "reported",
     "raw": "764.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.74,
     "max": 2.74,
     "quality": "reported",
     "raw": "2.74",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-09",
     "quality": "reported",
     "raw": "8/9/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/191",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C03M701",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 191,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.2,
     "max": 26.2,
     "quality": "reported",
     "raw": "299.35",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-192_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.35",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-192_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 5.5,
     "max": 5.5,
     "quality": "reported",
     "raw": "5.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.46,
     "max": 0.46,
     "quality": "reported",
     "raw": "0.46",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. A smaller droplet that drifts to the lower igniter after deployment. The igniter seems to stop the drift and the droplet remains near the center of the FOV for the duration of the entire test. The droplet burns to diffusive extinction.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. A smaller droplet that drifts to the lower igniter after deployment. The igniter seems to stop the drift and the droplet remains near the center of the FOV for the duration of the entire test. The droplet burns to diffusive extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-192_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/CO2, 1.0 atm ambient environment. A smaller droplet that drifts to the lower igniter after deployment. The igniter seems to stop the drift and the droplet remains near the center of the FOV for the duration of the entire test. The droplet burns to diffusive extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-192_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.81,
     "max": 0.81,
     "quality": "reported",
     "raw": "0.81",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-192_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-192_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.032,
     "max": 102.032,
     "quality": "reported",
     "raw": "765.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.76,
     "max": 1.76,
     "quality": "reported",
     "raw": "1.76",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-09",
     "quality": "reported",
     "raw": "8/9/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/192",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C04M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 192,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.28,
     "max": 27.28,
     "quality": "reported",
     "raw": "300.43",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-193_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.43",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-193_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 21.8,
     "max": 21.8,
     "quality": "reported",
     "raw": "21.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.39,
     "max": 0.39,
     "quality": "reported",
     "raw": "0.39",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.17/0.63/0.20 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifted E and out of the HiBMS FOV after deployment and ignition. The droplet also drifted out of the LLUV FOV before flame extinction. The color camera IPSU did not record any images after deployment. The downlink video shows diffusive extinction with no disruption.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.17/0.63/0.20 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifted E and out of the HiBMS FOV after deployment and ignition. The droplet also drifted out of the LLUV FOV before flame extinction. The color camera IPSU did not record any images after deployment. The downlink video shows diffusive extinction with no disruption.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-193_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.17/0.63/0.20 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifted E and out of the HiBMS FOV after deployment and ignition. The droplet also drifted out of the LLUV FOV before flame extinction. The color camera IPSU did not record any images after deployment. The downlink video shows diffusive extinction with no disruption.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-193_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-193_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-193_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.63,
     "max": 0.63,
     "quality": "reported",
     "raw": "0.63",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.258,
     "max": 101.258,
     "quality": "reported",
     "raw": "759.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.46,
     "max": 3.46,
     "quality": "reported",
     "raw": "3.46",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-09",
     "quality": "reported",
     "raw": "8/9/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/193",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C04M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 193,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.28,
     "max": 27.28,
     "quality": "reported",
     "raw": "300.43",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-194_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.43",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-194_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 15.6,
     "max": 15.6,
     "quality": "reported",
     "raw": "15.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.17/0.63/0.20 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts S in the HiBMS FOV after deploment and ignition, stays in the FOV, briefly drifts N, then E and out of the HiBMS FOV just prior to visible (diffusive) flame extinction. The extinction droplet diameter comes from extrapolating the droplet history until the time of flame extinction (from the LLUV) using the measured burning rate constant from the later part of the burn. The color camera IPSU did not record any images after deployment.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.17/0.63/0.20 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts S in the HiBMS FOV after deploment and ignition, stays in the FOV, briefly drifts N, then E and out of the HiBMS FOV just prior to visible (diffusive) flame extinction. The extinction droplet diameter comes from extrapolating the droplet history until the time of flame extinction (from the LLUV) using the measured burning rate constant from the later part of the burn. The color camera IPSU did not record any images after deployment.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-194_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.17/0.63/0.20 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts S in the HiBMS FOV after deploment and ignition, stays in the FOV, briefly drifts N, then E and out of the HiBMS FOV just prior to visible (diffusive) flame extinction. The extinction droplet diameter comes from extrapolating the droplet history until the time of flame extinction (from the LLUV) using the measured burning rate constant from the later part of the burn. The color camera IPSU did not record any images after deployment.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-194_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.27,
     "max": 1.27,
     "quality": "reported",
     "raw": "1.27",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-194_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-194_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.63,
     "max": 0.63,
     "quality": "reported",
     "raw": "0.63",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.205,
     "max": 101.205,
     "quality": "reported",
     "raw": "759.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.77,
     "max": 2.77,
     "quality": "reported",
     "raw": "2.77",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-09",
     "quality": "reported",
     "raw": "8/9/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/194",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C04H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 194,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.34,
     "max": 25.34,
     "quality": "reported",
     "raw": "298.49",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-195_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.49",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-195_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 1.6,
     "max": 1.6,
     "quality": "reported",
     "raw": "1.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.29,
     "max": 0.29,
     "quality": "reported",
     "raw": "0.29",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.17/0.63/0.20 O2/N2/CO2, 1.0 atm ambient environment. There is almost no drift in the HiBMS FOVand the droplet remains in the FOVs of all cameras for the entire recording time. The flame radiatively extinguishes quickly after ignition. There vaporization rate increases after visible flame extinction and then quickly plateaus well after visible flame extinction, indicative of cool flame burning and extinction. The HiBMS view gets extremely dark coincident with the vapor cloud formation.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.17/0.63/0.20 O2/N2/CO2, 1.0 atm ambient environment. There is almost no drift in the HiBMS FOVand the droplet remains in the FOVs of all cameras for the entire recording time. The flame radiatively extinguishes quickly after ignition. There vaporization rate increases after visible flame extinction and then quickly plateaus well after visible flame extinction, indicative of cool flame burning and extinction. The HiBMS view gets extremely dark coincident with the vapor cloud formation.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-195_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.17/0.63/0.20 O2/N2/CO2, 1.0 atm ambient environment. There is almost no drift in the HiBMS FOVand the droplet remains in the FOVs of all cameras for the entire recording time. The flame radiatively extinguishes quickly after ignition. There vaporization rate increases after visible flame extinction and then quickly plateaus well after visible flame extinction, indicative of cool flame burning and extinction. The HiBMS view gets extremely dark coincident with the vapor cloud formation.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-195_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.71,
     "max": 3.71,
     "quality": "reported",
     "raw": "3.71",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-195_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-195_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.63,
     "max": 0.63,
     "quality": "reported",
     "raw": "0.63",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 100.258,
     "max": 100.258,
     "quality": "reported",
     "raw": "752",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.76,
     "max": 3.76,
     "quality": "reported",
     "raw": "3.76",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-17",
     "quality": "reported",
     "raw": "8/17/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/195",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C04H201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 195,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.59,
     "max": 25.59,
     "quality": "reported",
     "raw": "298.74",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-196_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.74",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-196_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 1.9,
     "max": 1.9,
     "quality": "reported",
     "raw": "1.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.36,
     "max": 0.36,
     "quality": "reported",
     "raw": "0.36",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet stays in HiBMS FOV with very little residual motion for the entire test. The flame radiative extinguishes quickly, followed by rapid vaporization and then by a large vapor cloud formation. This means that cool flame burning and extinction following visible flame extinction was likely. The HiBMS FOV view dims when cloud forms and this is likely the cause of the dropelt getting slightly larger at the end of the test (the changing background combined with the fixed segmentation value caused more pixels to be counted as 'droplet').",
     "quality": "reported",
     "raw": "Free-floating heptane droplet in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet stays in HiBMS FOV with very little residual motion for the entire test. The flame radiative extinguishes quickly, followed by rapid vaporization and then by a large vapor cloud formation. This means that cool flame burning and extinction following visible flame extinction was likely. The HiBMS FOV view dims when cloud forms and this is likely the cause of the dropelt getting slightly larger at the end of the test (the changing background combined with the fixed segmentation value caused more pixels to be counted as 'droplet').",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-196_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet stays in HiBMS FOV with very little residual motion for the entire test. The flame radiative extinguishes quickly, followed by rapid vaporization and then by a large vapor cloud formation. This means that cool flame burning and extinction following visible flame extinction was likely. The HiBMS FOV view dims when cloud forms and this is likely the cause of the dropelt getting slightly larger at the end of the test (the changing background combined with the fixed segmentation value caused more pixels to be counted as 'droplet').",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-196_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.79,
     "max": 2.79,
     "quality": "reported",
     "raw": "2.79",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-196_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-196_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.63,
     "max": 0.63,
     "quality": "reported",
     "raw": "0.63",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 100.325,
     "max": 100.325,
     "quality": "reported",
     "raw": "752.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.9,
     "max": 2.9,
     "quality": "reported",
     "raw": "2.9",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-17",
     "quality": "reported",
     "raw": "8/17/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/196",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C01H501",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 196,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.38,
     "max": 26.38,
     "quality": "reported",
     "raw": "299.53",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-197_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.53",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-197_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8.9,
     "max": 8.9,
     "quality": "reported",
     "raw": "8.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.05,
     "max": 0.05,
     "quality": "reported",
     "raw": "0.05",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts E out of HiBMS FOV just before radiative extinction. There is a large vapor cloud formed 15 - 20 seconds after visible flame extinction (visible in the color camera. The vapor cloud means that cool flame burning and extinction after visible flame extinction was likely. The extinction droplet diameter is extrapolated from the droplet history using the measured burning rate constant (later in the droplet lifetime) and the time of extinction from the LLUV.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts E out of HiBMS FOV just before radiative extinction. There is a large vapor cloud formed 15 - 20 seconds after visible flame extinction (visible in the color camera. The vapor cloud means that cool flame burning and extinction after visible flame extinction was likely. The extinction droplet diameter is extrapolated from the droplet history using the measured burning rate constant (later in the droplet lifetime) and the time of extinction from the LLUV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-197_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts E out of HiBMS FOV just before radiative extinction. There is a large vapor cloud formed 15 - 20 seconds after visible flame extinction (visible in the color camera. The vapor cloud means that cool flame burning and extinction after visible flame extinction was likely. The extinction droplet diameter is extrapolated from the droplet history using the measured burning rate constant (later in the droplet lifetime) and the time of extinction from the LLUV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-197_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.28,
     "max": 2.28,
     "quality": "reported",
     "raw": "2.28",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-197_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-197_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.112,
     "max": 101.112,
     "quality": "reported",
     "raw": "758.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.06,
     "max": 3.06,
     "quality": "reported",
     "raw": "3.06",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-18",
     "quality": "reported",
     "raw": "8/18/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/197",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C01H601",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 197,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.54,
     "max": 26.54,
     "quality": "reported",
     "raw": "299.69",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-198_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.69",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-198_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.05,
     "max": 0.05,
     "quality": "reported",
     "raw": "0.05",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet stays in HiBMS and LLUV FOVs for the entire recording time. The color camera IPUS did not record any images after deployment. The flame radiatively extinguishes and there appears to be rapid vaporization followed by a plateau late in the recording time after the visible flame extinction. This is indicative of cool flame and burning after visible flame extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet stays in HiBMS and LLUV FOVs for the entire recording time. The color camera IPUS did not record any images after deployment. The flame radiatively extinguishes and there appears to be rapid vaporization followed by a plateau late in the recording time after the visible flame extinction. This is indicative of cool flame and burning after visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-198_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet stays in HiBMS and LLUV FOVs for the entire recording time. The color camera IPUS did not record any images after deployment. The flame radiatively extinguishes and there appears to be rapid vaporization followed by a plateau late in the recording time after the visible flame extinction. This is indicative of cool flame and burning after visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-198_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.33,
     "max": 2.33,
     "quality": "reported",
     "raw": "2.33",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-198_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-198_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.298,
     "max": 101.298,
     "quality": "reported",
     "raw": "759.8",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.04,
     "max": 3.04,
     "quality": "reported",
     "raw": "3.04",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-18",
     "quality": "reported",
     "raw": "8/18/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/198",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C01H701",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 198,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.71,
     "max": 26.71,
     "quality": "reported",
     "raw": "299.86",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-199_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.86",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-199_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8.7,
     "max": 8.7,
     "quality": "reported",
     "raw": "8.7",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.53,
     "max": 0.53,
     "quality": "reported",
     "raw": "0.53",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.05,
     "max": 0.05,
     "quality": "reported",
     "raw": "0.05",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifted N after deployment and ignition and out of HiBMS FOV. The droplet leaves the HiBMS FOV before disruptive flame extinction at a very small droplet size. The extinction droplet diameter is the estimated droplet diameter (from extrapolating the droplet history until the disruption using the measured burning rate constant) when the disruption occurs.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifted N after deployment and ignition and out of HiBMS FOV. The droplet leaves the HiBMS FOV before disruptive flame extinction at a very small droplet size. The extinction droplet diameter is the estimated droplet diameter (from extrapolating the droplet history until the disruption using the measured burning rate constant) when the disruption occurs.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-199_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifted N after deployment and ignition and out of HiBMS FOV. The droplet leaves the HiBMS FOV before disruptive flame extinction at a very small droplet size. The extinction droplet diameter is the estimated droplet diameter (from extrapolating the droplet history until the disruption using the measured burning rate constant) when the disruption occurs.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-199_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.13,
     "max": 0.13,
     "quality": "reported",
     "raw": "0.13",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-199_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-199_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.338,
     "max": 101.338,
     "quality": "reported",
     "raw": "760.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.12,
     "max": 2.12,
     "quality": "reported",
     "raw": "2.12",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-18",
     "quality": "reported",
     "raw": "8/18/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/199",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C01M501",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 199,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 23.86,
     "max": 23.86,
     "quality": "reported",
     "raw": "297.01",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-200_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 297.01",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-200_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 21,
     "max": 21,
     "quality": "reported",
     "raw": "21",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.05,
     "max": 0.05,
     "quality": "reported",
     "raw": "0.05",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts E and out of HiBMS FOV. After drifting out of the HiBMS FOV, it drifts back in slightly, then out again for good. Diffusive extinction after long burn. There is no extinction diameter listed for this test because the droplet was in the HiBMS FOV for only a small fraction of the total test. The color camera IPSU did not record any images after deployment.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts E and out of HiBMS FOV. After drifting out of the HiBMS FOV, it drifts back in slightly, then out again for good. Diffusive extinction after long burn. There is no extinction diameter listed for this test because the droplet was in the HiBMS FOV for only a small fraction of the total test. The color camera IPSU did not record any images after deployment.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-200_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts E and out of HiBMS FOV. After drifting out of the HiBMS FOV, it drifts back in slightly, then out again for good. Diffusive extinction after long burn. There is no extinction diameter listed for this test because the droplet was in the HiBMS FOV for only a small fraction of the total test. The color camera IPSU did not record any images after deployment.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-200_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.98,
     "max": 0.98,
     "quality": "reported",
     "raw": "0.98",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-200_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-200_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 100.525,
     "max": 100.525,
     "quality": "reported",
     "raw": "754",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.37,
     "max": 3.37,
     "quality": "reported",
     "raw": "3.37",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-24",
     "quality": "reported",
     "raw": "8/24/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/200",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C01M602",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 200,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 24.8,
     "max": 24.8,
     "quality": "reported",
     "raw": "297.95",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-201_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 297.95",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-201_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 11.7,
     "max": 11.7,
     "quality": "reported",
     "raw": "11.7",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.47,
     "max": 0.47,
     "quality": "reported",
     "raw": "0.47",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.05,
     "max": 0.05,
     "quality": "reported",
     "raw": "0.05",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition. It leaves the HiBMS FOV approximately 2/3rds of the way through the burn that ends with a diffusive extinction. The extinction droplet diameter comes from extrapolating the droplet history until the time of extinction using the average burning rate constant from the last half of the time the droplet is within the HiBMS FOV. The color camera IPSU did not record any images after deployment.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition. It leaves the HiBMS FOV approximately 2/3rds of the way through the burn that ends with a diffusive extinction. The extinction droplet diameter comes from extrapolating the droplet history until the time of extinction using the average burning rate constant from the last half of the time the droplet is within the HiBMS FOV. The color camera IPSU did not record any images after deployment.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-201_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition. It leaves the HiBMS FOV approximately 2/3rds of the way through the burn that ends with a diffusive extinction. The extinction droplet diameter comes from extrapolating the droplet history until the time of extinction using the average burning rate constant from the last half of the time the droplet is within the HiBMS FOV. The color camera IPSU did not record any images after deployment.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-201_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.13,
     "max": 1.13,
     "quality": "reported",
     "raw": "1.13",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-201_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-201_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 100.805,
     "max": 100.805,
     "quality": "reported",
     "raw": "756.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.57,
     "max": 2.57,
     "quality": "reported",
     "raw": "2.57",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-24",
     "quality": "reported",
     "raw": "8/24/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/201",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "C01M603",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 201,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.11,
     "max": 25.11,
     "quality": "reported",
     "raw": "298.26",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-202_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.26",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-202_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 10.2,
     "max": 10.2,
     "quality": "reported",
     "raw": "10.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.48,
     "max": 0.48,
     "quality": "reported",
     "raw": "0.48",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0.05,
     "max": 0.05,
     "quality": "reported",
     "raw": "0.05",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet has very little residual motion after deployment and ignition, drifting S in the HiBMS FOV, but very slowly. The droplet stays in the FOVs of all the cameras for the entire test.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet has very little residual motion after deployment and ignition, drifting S in the HiBMS FOV, but very slowly. The droplet stays in the FOVs of all the cameras for the entire test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-202_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet in a 0.20/0.75/0.05 O2/N2/CO2, 1.0 atm ambient environment. The droplet has very little residual motion after deployment and ignition, drifting S in the HiBMS FOV, but very slowly. The droplet stays in the FOVs of all the cameras for the entire test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-202_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + CO2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.05,
     "max": 1.05,
     "quality": "reported",
     "raw": "1.05",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-202_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-202_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 100.912,
     "max": 100.912,
     "quality": "reported",
     "raw": "756.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.4,
     "max": 2.4,
     "quality": "reported",
     "raw": "2.4",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-24",
     "quality": "reported",
     "raw": "8/24/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/202",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N01M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 202,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.94,
     "max": 25.94,
     "quality": "reported",
     "raw": "299.09",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-203_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.09",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-203_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 19.5,
     "max": 19.5,
     "quality": "reported",
     "raw": "19.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.47,
     "max": 0.47,
     "quality": "reported",
     "raw": "0.47",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a nominally air, 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet stays in FOV of all cameras and diffusively extinguishes.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a nominally air, 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet stays in FOV of all cameras and diffusively extinguishes.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-203_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a nominally air, 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet stays in FOV of all cameras and diffusively extinguishes.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-203_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.42,
     "max": 1.42,
     "quality": "reported",
     "raw": "1.42",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-203_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-203_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.352,
     "max": 101.352,
     "quality": "reported",
     "raw": "760.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.3,
     "max": 3.3,
     "quality": "reported",
     "raw": "3.3",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-24",
     "quality": "reported",
     "raw": "8/24/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/203",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N01M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 203,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.23,
     "max": 26.23,
     "quality": "reported",
     "raw": "299.38",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-204_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.38",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-204_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 12.8,
     "max": 12.8,
     "quality": "reported",
     "raw": "12.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a nominally air, 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet stayed in the FOVs of all cameras for the entire burn, but did drift S and out of the HiBMS FOV shortly after diffusive extinction. IPSU1 did not record every frame.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a nominally air, 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet stayed in the FOVs of all cameras for the entire burn, but did drift S and out of the HiBMS FOV shortly after diffusive extinction. IPSU1 did not record every frame.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-204_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a nominally air, 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet stayed in the FOVs of all cameras for the entire burn, but did drift S and out of the HiBMS FOV shortly after diffusive extinction. IPSU1 did not record every frame.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-204_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.11,
     "max": 1.11,
     "quality": "reported",
     "raw": "1.11",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-204_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-204_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.538,
     "max": 101.538,
     "quality": "reported",
     "raw": "761.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.75,
     "max": 2.75,
     "quality": "reported",
     "raw": "2.75",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-24",
     "quality": "reported",
     "raw": "8/24/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/204",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N01H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 204,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 23.86,
     "max": 23.86,
     "quality": "reported",
     "raw": "297.01",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-206_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 297.01",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-206_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 23.9,
     "max": 23.9,
     "quality": "reported",
     "raw": "23.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.43,
     "max": 0.43,
     "quality": "reported",
     "raw": "0.43",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a nominally air, 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet drifts SE in the HiBMS FOV after deployment, then hits the igniter and changes direction to NW with a relatively high speed. It drifts NW and out of the HiBMS FOV after a very short time. The droplet drifts out of the color camera FOV, but remains in the LLUV FOV. The flame oscillates for several seconds in the middle of the burn. The flame behavior suggests that this initial droplet size is right on the edge of the radiative limit, as the oscillations characteristically occur just prior to radiative flame extinction, but the flame oscillates briefly before becoming more stable and burning to disruption. Also, the LLUV flame intensity decreases throughout the test initially (the dip in the middle corresponding to when the flame partially leaves the LLUV FOV, then becoming brighter.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a nominally air, 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet drifts SE in the HiBMS FOV after deployment, then hits the igniter and changes direction to NW with a relatively high speed. It drifts NW and out of the HiBMS FOV after a very short time. The droplet drifts out of the color camera FOV, but remains in the LLUV FOV. The flame oscillates for several seconds in the middle of the burn. The flame behavior suggests that this initial droplet size is right on the edge of the radiative limit, as the oscillations characteristically occur just prior to radiative flame extinction, but the flame oscillates briefly before becoming more stable and burning to disruption. Also, the LLUV flame intensity decreases throughout the test initially (the dip in the middle corresponding to when the flame partially leaves the LLUV FOV, then becoming brighter.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-206_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a nominally air, 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet drifts SE in the HiBMS FOV after deployment, then hits the igniter and changes direction to NW with a relatively high speed. It drifts NW and out of the HiBMS FOV after a very short time. The droplet drifts out of the color camera FOV, but remains in the LLUV FOV. The flame oscillates for several seconds in the middle of the burn. The flame behavior suggests that this initial droplet size is right on the edge of the radiative limit, as the oscillations characteristically occur just prior to radiative flame extinction, but the flame oscillates briefly before becoming more stable and burning to disruption. Also, the LLUV flame intensity decreases throughout the test initially (the dip in the middle corresponding to when the flame partially leaves the LLUV FOV, then becoming brighter.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-206_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-206_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-206_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 100.858,
     "max": 100.858,
     "quality": "reported",
     "raw": "756.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.56,
     "max": 3.56,
     "quality": "reported",
     "raw": "3.56",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-29",
     "quality": "reported",
     "raw": "8/29/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/205",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N01H102",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 205,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 24.21,
     "max": 24.21,
     "quality": "reported",
     "raw": "297.36",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-207_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 297.36",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-207_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 24,
     "max": 24,
     "quality": "reported",
     "raw": "24",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.42,
     "max": 0.42,
     "quality": "reported",
     "raw": "0.42",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a nominally air, 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet drifts SE in the HiBMS FOV after deployment, hits the igniter and begins to drift N. The drift velocity is relatively high and it drifts out of the HiBMS FOV relatively quickly after ignition. It also drifts out of the LLUV and Color Camera FOVs before the end of the test. The flame oscillates briefly in the middle of the burn and then becomes steady and burns to a disruptive extinction. The flame is very dim in the Color Camera FOV with the leading edge of the flame (in the direction of the droplet drift) much brighter than the trailing edge.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a nominally air, 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet drifts SE in the HiBMS FOV after deployment, hits the igniter and begins to drift N. The drift velocity is relatively high and it drifts out of the HiBMS FOV relatively quickly after ignition. It also drifts out of the LLUV and Color Camera FOVs before the end of the test. The flame oscillates briefly in the middle of the burn and then becomes steady and burns to a disruptive extinction. The flame is very dim in the Color Camera FOV with the leading edge of the flame (in the direction of the droplet drift) much brighter than the trailing edge.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-207_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a nominally air, 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet drifts SE in the HiBMS FOV after deployment, hits the igniter and begins to drift N. The drift velocity is relatively high and it drifts out of the HiBMS FOV relatively quickly after ignition. It also drifts out of the LLUV and Color Camera FOVs before the end of the test. The flame oscillates briefly in the middle of the burn and then becomes steady and burns to a disruptive extinction. The flame is very dim in the Color Camera FOV with the leading edge of the flame (in the direction of the droplet drift) much brighter than the trailing edge.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-207_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-207_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-207_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 100.965,
     "max": 100.965,
     "quality": "reported",
     "raw": "757.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.58,
     "max": 3.58,
     "quality": "reported",
     "raw": "3.58",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-29",
     "quality": "reported",
     "raw": "8/29/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/206",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N01H201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 206,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.23,
     "max": 25.23,
     "quality": "reported",
     "raw": "298.38",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-208_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.38",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-208_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 17.1,
     "max": 17.1,
     "quality": "reported",
     "raw": "17.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.5,
     "max": 0.5,
     "quality": "reported",
     "raw": "0.5",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a nominally air, 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet drifts SE after deployment and into the igniter, changes direction to N after igniter withdraw. The droplet drifts N during the burn and out of HiBMS FOV. The flame grows, remains stable (no oscillations) and then shrinks to a disruptive extinction at a relatively small size. The droplet remained in the LLUV for the entire test. The MDCA Color Camera did not record images on-board for this test (the downlinked video is available).",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a nominally air, 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet drifts SE after deployment and into the igniter, changes direction to N after igniter withdraw. The droplet drifts N during the burn and out of HiBMS FOV. The flame grows, remains stable (no oscillations) and then shrinks to a disruptive extinction at a relatively small size. The droplet remained in the LLUV for the entire test. The MDCA Color Camera did not record images on-board for this test (the downlinked video is available).",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-208_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a nominally air, 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet drifts SE after deployment and into the igniter, changes direction to N after igniter withdraw. The droplet drifts N during the burn and out of HiBMS FOV. The flame grows, remains stable (no oscillations) and then shrinks to a disruptive extinction at a relatively small size. The droplet remained in the LLUV for the entire test. The MDCA Color Camera did not record images on-board for this test (the downlinked video is available).",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-208_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.47,
     "max": 0.47,
     "quality": "reported",
     "raw": "0.47",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-208_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-208_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.352,
     "max": 101.352,
     "quality": "reported",
     "raw": "760.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.96,
     "max": 2.96,
     "quality": "reported",
     "raw": "2.96",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-29",
     "quality": "reported",
     "raw": "8/29/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/207",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N01H202",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 207,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.98,
     "max": 25.98,
     "quality": "reported",
     "raw": "299.13",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-209_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.13",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-209_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 11.5,
     "max": 11.5,
     "quality": "reported",
     "raw": "11.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.54,
     "max": 0.54,
     "quality": "reported",
     "raw": "0.54",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a nominally air, 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet drifts SE after deployment, does not touch the igniter and continues to drift SE in the HiBMS FOV. The droplet drifts S and out of LLUV FOV. IPSU4 did not record color camera data and it is unclear whether disruption occurred. There is no extinction droplet diameter reported because of the small fraction of the total test that the droplet is within the HiBMS FOV.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a nominally air, 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet drifts SE after deployment, does not touch the igniter and continues to drift SE in the HiBMS FOV. The droplet drifts S and out of LLUV FOV. IPSU4 did not record color camera data and it is unclear whether disruption occurred. There is no extinction droplet diameter reported because of the small fraction of the total test that the droplet is within the HiBMS FOV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-209_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a nominally air, 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet drifts SE after deployment, does not touch the igniter and continues to drift SE in the HiBMS FOV. The droplet drifts S and out of LLUV FOV. IPSU4 did not record color camera data and it is unclear whether disruption occurred. There is no extinction droplet diameter reported because of the small fraction of the total test that the droplet is within the HiBMS FOV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-209_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.13,
     "max": 1.13,
     "quality": "reported",
     "raw": "1.13",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-209_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-209_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.685,
     "max": 101.685,
     "quality": "reported",
     "raw": "762.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.72,
     "max": 2.72,
     "quality": "reported",
     "raw": "2.72",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-29",
     "quality": "reported",
     "raw": "8/29/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/208",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N01H301",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 208,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.14,
     "max": 26.14,
     "quality": "reported",
     "raw": "299.29",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-210_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.29",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-210_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 12.8,
     "max": 12.8,
     "quality": "reported",
     "raw": "12.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.69,
     "max": 0.69,
     "quality": "reported",
     "raw": "0.69",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet in a nominally air, 0.21/0.79 O2/N2, 1.0 atm ambient environment. There is some drift E on the fiber after ignition and early in the droplet lifetime. The soot agglomerates that are near the droplet create a lot of noise in the droplet measurement for the first half of the burn. There is a lot of motion of the droplet on the fiber late in the droplet lifetime as well. There is evidence of some unusual soot dynamics with large soot particles moving slowly towards the droplet and then more rapidly pushed away (presumably by the Stefan flow). The droplet burns to completion.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet in a nominally air, 0.21/0.79 O2/N2, 1.0 atm ambient environment. There is some drift E on the fiber after ignition and early in the droplet lifetime. The soot agglomerates that are near the droplet create a lot of noise in the droplet measurement for the first half of the burn. There is a lot of motion of the droplet on the fiber late in the droplet lifetime as well. There is evidence of some unusual soot dynamics with large soot particles moving slowly towards the droplet and then more rapidly pushed away (presumably by the Stefan flow). The droplet burns to completion.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-210_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet in a nominally air, 0.21/0.79 O2/N2, 1.0 atm ambient environment. There is some drift E on the fiber after ignition and early in the droplet lifetime. The soot agglomerates that are near the droplet create a lot of noise in the droplet measurement for the first half of the burn. There is a lot of motion of the droplet on the fiber late in the droplet lifetime as well. There is evidence of some unusual soot dynamics with large soot particles moving slowly towards the droplet and then more rapidly pushed away (presumably by the Stefan flow). The droplet burns to completion.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-210_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-210_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-210_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.712,
     "max": 101.712,
     "quality": "reported",
     "raw": "762.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.92,
     "max": 2.92,
     "quality": "reported",
     "raw": "2.92",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-29",
     "quality": "reported",
     "raw": "8/29/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/209",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N02H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 209,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.43,
     "max": 26.43,
     "quality": "reported",
     "raw": "299.58",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-211_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.58",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-211_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 3.4,
     "max": 3.4,
     "quality": "reported",
     "raw": "3.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.34,
     "max": 0.34,
     "quality": "reported",
     "raw": "0.34",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.16/0.84 O2/N2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition and stays in FOV of all cameras throughout the entire recording time of the IPSUs. The flame grows, radiatively extinguishes and then there is rapid post-visible flame extinction vaporization. The vaporization rate of the droplet actually increases after visible flame extinction and then rapidly decreases coincident with vapor cloud formation. The behavior after visible flame extinction is indicative of cool flame burning and extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.16/0.84 O2/N2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition and stays in FOV of all cameras throughout the entire recording time of the IPSUs. The flame grows, radiatively extinguishes and then there is rapid post-visible flame extinction vaporization. The vaporization rate of the droplet actually increases after visible flame extinction and then rapidly decreases coincident with vapor cloud formation. The behavior after visible flame extinction is indicative of cool flame burning and extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-211_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.16/0.84 O2/N2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition and stays in FOV of all cameras throughout the entire recording time of the IPSUs. The flame grows, radiatively extinguishes and then there is rapid post-visible flame extinction vaporization. The vaporization rate of the droplet actually increases after visible flame extinction and then rapidly decreases coincident with vapor cloud formation. The behavior after visible flame extinction is indicative of cool flame burning and extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-211_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.18,
     "max": 3.18,
     "quality": "reported",
     "raw": "3.18",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-211_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-211_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.84,
     "max": 0.84,
     "quality": "reported",
     "raw": "0.84",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.16,
     "max": 0.16,
     "quality": "reported",
     "raw": "0.16",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.298,
     "max": 101.298,
     "quality": "reported",
     "raw": "759.8",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.34,
     "max": 3.34,
     "quality": "reported",
     "raw": "3.34",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-29",
     "quality": "reported",
     "raw": "8/29/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/210",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N02H201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 210,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.44,
     "max": 26.44,
     "quality": "reported",
     "raw": "299.59",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-212_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.59",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-212_TestSheet.txt"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.16/0.84 O2/N2, 1.0 atm ambient evnironment. The droplet drifts N in the color camera FOV. The HiBMS IPSU did not record any images for this test. The droplet stayed in the FOV of the LLUV and color camera. The flame burns for a short time to radiative extinction. This is likely followed by cool flame burning and extinction. The color camera shows a large vapor cloud formed some time after visible flame extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.16/0.84 O2/N2, 1.0 atm ambient evnironment. The droplet drifts N in the color camera FOV. The HiBMS IPSU did not record any images for this test. The droplet stayed in the FOV of the LLUV and color camera. The flame burns for a short time to radiative extinction. This is likely followed by cool flame burning and extinction. The color camera shows a large vapor cloud formed some time after visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-212_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.16/0.84 O2/N2, 1.0 atm ambient evnironment. The droplet drifts N in the color camera FOV. The HiBMS IPSU did not record any images for this test. The droplet stayed in the FOV of the LLUV and color camera. The flame burns for a short time to radiative extinction. This is likely followed by cool flame burning and extinction. The color camera shows a large vapor cloud formed some time after visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-212_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-212_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-212_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.84,
     "max": 0.84,
     "quality": "reported",
     "raw": "0.84",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.16,
     "max": 0.16,
     "quality": "reported",
     "raw": "0.16",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.298,
     "max": 101.298,
     "quality": "reported",
     "raw": "759.8",
     "column": "Ambient pressure; mmHg"
    },
    "test_date": {
     "text": "2011-08-29",
     "quality": "reported",
     "raw": "8/29/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/211",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N02H203",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 211,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.52,
     "max": 26.52,
     "quality": "reported",
     "raw": "299.67",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-214_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.67",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-214_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 4.5,
     "max": 4.5,
     "quality": "reported",
     "raw": "4.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.42,
     "max": 0.42,
     "quality": "reported",
     "raw": "0.42",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.16/0.84 O2/N2, 1.0 atm ambient environment. The droplet stays in FOV of all cameras for the entire IPSU recording time. The flame grows and exhibits radiative extinction shortly after ignition. There is then a period of rapid post-extinction vaporization followed by a plateau in the droplet history coincident with the appearance of a vapor cloud. Both are indicative of cool flame burning and extinction following visible flame extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.16/0.84 O2/N2, 1.0 atm ambient environment. The droplet stays in FOV of all cameras for the entire IPSU recording time. The flame grows and exhibits radiative extinction shortly after ignition. There is then a period of rapid post-extinction vaporization followed by a plateau in the droplet history coincident with the appearance of a vapor cloud. Both are indicative of cool flame burning and extinction following visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-214_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.16/0.84 O2/N2, 1.0 atm ambient environment. The droplet stays in FOV of all cameras for the entire IPSU recording time. The flame grows and exhibits radiative extinction shortly after ignition. There is then a period of rapid post-extinction vaporization followed by a plateau in the droplet history coincident with the appearance of a vapor cloud. Both are indicative of cool flame burning and extinction following visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-214_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.13,
     "max": 2.13,
     "quality": "reported",
     "raw": "2.13",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-214_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-214_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.84,
     "max": 0.84,
     "quality": "reported",
     "raw": "0.84",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.16,
     "max": 0.16,
     "quality": "reported",
     "raw": "0.16",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.312,
     "max": 101.312,
     "quality": "reported",
     "raw": "759.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.52,
     "max": 2.52,
     "quality": "reported",
     "raw": "2.52",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-08-30",
     "quality": "reported",
     "raw": "8/30/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/212",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N03H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 212,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.19,
     "max": 25.19,
     "quality": "reported",
     "raw": "298.34",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-215_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.34",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-215_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 3.4,
     "max": 3.4,
     "quality": "reported",
     "raw": "3.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.37,
     "max": 0.37,
     "quality": "reported",
     "raw": "0.37",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. The droplet has very little residual motion after deployment and ignition with only a very small drift N in the HiBMS FOV. The droplet stays in FOV of all cameras throughout the recording time of the IPSUs. The flame grows and gets dimmer after ignition and radiatively extinguishes shortly after ignition. This is followed by a period of rapid vaporization and then a quick plateau in the droplet history coincident with the formation of a vapor cloud. Both of these are evidence of cool flame burning and extinction after visible flame extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. The droplet has very little residual motion after deployment and ignition with only a very small drift N in the HiBMS FOV. The droplet stays in FOV of all cameras throughout the recording time of the IPSUs. The flame grows and gets dimmer after ignition and radiatively extinguishes shortly after ignition. This is followed by a period of rapid vaporization and then a quick plateau in the droplet history coincident with the formation of a vapor cloud. Both of these are evidence of cool flame burning and extinction after visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-215_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.15/0.85 O2/N2, 1.0 atm ambient environment. The droplet has very little residual motion after deployment and ignition with only a very small drift N in the HiBMS FOV. The droplet stays in FOV of all cameras throughout the recording time of the IPSUs. The flame grows and gets dimmer after ignition and radiatively extinguishes shortly after ignition. This is followed by a period of rapid vaporization and then a quick plateau in the droplet history coincident with the formation of a vapor cloud. Both of these are evidence of cool flame burning and extinction after visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-215_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.31,
     "max": 2.31,
     "quality": "reported",
     "raw": "2.31",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-215_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-215_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.85,
     "max": 0.85,
     "quality": "reported",
     "raw": "0.85",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.858,
     "max": 101.858,
     "quality": "reported",
     "raw": "764",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.55,
     "max": 2.55,
     "quality": "reported",
     "raw": "2.55",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-01",
     "quality": "reported",
     "raw": "9/1/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/213",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N04H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 213,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.49,
     "max": 26.49,
     "quality": "reported",
     "raw": "299.64",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-217_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.64",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-217_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 1.6,
     "max": 1.6,
     "quality": "reported",
     "raw": "1.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.24,
     "max": 0.24,
     "quality": "reported",
     "raw": "0.24",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.14/0.86 O2/N2, 1.0 atm ambient environment. The droplet stays in FOV of all cameras for the entire recording time of all the IPSUs. The droplet does drift E to the edge of the HiBMS FOV and then S to the corner of the HiBMS FOV, but never leaves the HiBMS FOV. Very quick radiative extinction. The vaporization rate after extinction does not change and there is a small vapor cloud formed, indicating there may have been a cool flame, although the extinction of the cool flame is not pronounced.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.14/0.86 O2/N2, 1.0 atm ambient environment. The droplet stays in FOV of all cameras for the entire recording time of all the IPSUs. The droplet does drift E to the edge of the HiBMS FOV and then S to the corner of the HiBMS FOV, but never leaves the HiBMS FOV. Very quick radiative extinction. The vaporization rate after extinction does not change and there is a small vapor cloud formed, indicating there may have been a cool flame, although the extinction of the cool flame is not pronounced.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-217_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.14/0.86 O2/N2, 1.0 atm ambient environment. The droplet stays in FOV of all cameras for the entire recording time of all the IPSUs. The droplet does drift E to the edge of the HiBMS FOV and then S to the corner of the HiBMS FOV, but never leaves the HiBMS FOV. Very quick radiative extinction. The vaporization rate after extinction does not change and there is a small vapor cloud formed, indicating there may have been a cool flame, although the extinction of the cool flame is not pronounced.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-217_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 4.15,
     "max": 4.15,
     "quality": "reported",
     "raw": "4.15",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-217_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-217_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.86,
     "max": 0.86,
     "quality": "reported",
     "raw": "0.86",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.14,
     "max": 0.14,
     "quality": "reported",
     "raw": "0.14",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.298,
     "max": 101.298,
     "quality": "reported",
     "raw": "759.8",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 4.16,
     "max": 4.16,
     "quality": "reported",
     "raw": "4.16",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-01",
     "quality": "reported",
     "raw": "9/1/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/214",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N04H201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 214,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.53,
     "max": 26.53,
     "quality": "reported",
     "raw": "299.68",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-218_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.68",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-218_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 3.8,
     "max": 3.8,
     "quality": "reported",
     "raw": "3.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.39,
     "max": 0.39,
     "quality": "reported",
     "raw": "0.39",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.14/0.86 O2/N2, 1.0 atm ambient environment. This is a small droplet that drifts quickly NW in the HiBMS FOV after deployment and ignition and out of the FOV a short time after igniter withdraw. The droplet appears to radiatively extinguish, even at this relatively small size.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.14/0.86 O2/N2, 1.0 atm ambient environment. This is a small droplet that drifts quickly NW in the HiBMS FOV after deployment and ignition and out of the FOV a short time after igniter withdraw. The droplet appears to radiatively extinguish, even at this relatively small size.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-218_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.14/0.86 O2/N2, 1.0 atm ambient environment. This is a small droplet that drifts quickly NW in the HiBMS FOV after deployment and ignition and out of the FOV a short time after igniter withdraw. The droplet appears to radiatively extinguish, even at this relatively small size.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-218_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-218_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-218_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.86,
     "max": 0.86,
     "quality": "reported",
     "raw": "0.86",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.14,
     "max": 0.14,
     "quality": "reported",
     "raw": "0.14",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.312,
     "max": 101.312,
     "quality": "reported",
     "raw": "759.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.83,
     "max": 1.83,
     "quality": "reported",
     "raw": "1.83",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-01",
     "quality": "reported",
     "raw": "9/1/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/215",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N04M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 215,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.44,
     "max": 25.44,
     "quality": "reported",
     "raw": "298.59",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-219_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.59",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-219_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 26,
     "max": 26,
     "quality": "reported",
     "raw": "26",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.14/0.86 O2/N2, 1.0 atm ambient environment. The droplet drifts N and out of HiBMS FOV about 1/4th of the way through a very long burn that appeared to end in a diffusive extinction. The droplet drifts E in the LLUV FOV and partially out of the FOV, but stays in the Color Camera FOV. This was a very weak flame, barely visible on both the LLUV and color cameras. There is no extinction droplet diameter reported because the droplet is only in the HiBMS FOV for a small fraction of the flame lifetime.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.14/0.86 O2/N2, 1.0 atm ambient environment. The droplet drifts N and out of HiBMS FOV about 1/4th of the way through a very long burn that appeared to end in a diffusive extinction. The droplet drifts E in the LLUV FOV and partially out of the FOV, but stays in the Color Camera FOV. This was a very weak flame, barely visible on both the LLUV and color cameras. There is no extinction droplet diameter reported because the droplet is only in the HiBMS FOV for a small fraction of the flame lifetime.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-219_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.14/0.86 O2/N2, 1.0 atm ambient environment. The droplet drifts N and out of HiBMS FOV about 1/4th of the way through a very long burn that appeared to end in a diffusive extinction. The droplet drifts E in the LLUV FOV and partially out of the FOV, but stays in the Color Camera FOV. This was a very weak flame, barely visible on both the LLUV and color cameras. There is no extinction droplet diameter reported because the droplet is only in the HiBMS FOV for a small fraction of the flame lifetime.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-219_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-219_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-219_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.86,
     "max": 0.86,
     "quality": "reported",
     "raw": "0.86",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.14,
     "max": 0.14,
     "quality": "reported",
     "raw": "0.14",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.005,
     "max": 101.005,
     "quality": "reported",
     "raw": "757.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.5,
     "max": 3.5,
     "quality": "reported",
     "raw": "3.5",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-08",
     "quality": "reported",
     "raw": "9/8/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/216",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N04M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 216,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.64,
     "max": 25.64,
     "quality": "reported",
     "raw": "298.79",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-220_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.79",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-220_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 15.6,
     "max": 15.6,
     "quality": "reported",
     "raw": "15.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.38,
     "max": 0.38,
     "quality": "reported",
     "raw": "0.38",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet in a 0.14/0.86 O2/N2, 1.0 atm ambient environment. The droplet drifts N after deployment and ignition, and out of HiBMS FOV. Some time later it drifts back into the HiBMS FOV, just after visible flame extinction. This is a weak flame with a long burn to diffusive extinction. The extinction droplet diameter comes from a spline fit between the periods of time when the droplet is within the HiBMS FOV.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet in a 0.14/0.86 O2/N2, 1.0 atm ambient environment. The droplet drifts N after deployment and ignition, and out of HiBMS FOV. Some time later it drifts back into the HiBMS FOV, just after visible flame extinction. This is a weak flame with a long burn to diffusive extinction. The extinction droplet diameter comes from a spline fit between the periods of time when the droplet is within the HiBMS FOV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-220_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet in a 0.14/0.86 O2/N2, 1.0 atm ambient environment. The droplet drifts N after deployment and ignition, and out of HiBMS FOV. Some time later it drifts back into the HiBMS FOV, just after visible flame extinction. This is a weak flame with a long burn to diffusive extinction. The extinction droplet diameter comes from a spline fit between the periods of time when the droplet is within the HiBMS FOV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-220_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.27,
     "max": 1.27,
     "quality": "reported",
     "raw": "1.27",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-220_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-220_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.86,
     "max": 0.86,
     "quality": "reported",
     "raw": "0.86",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.14,
     "max": 0.14,
     "quality": "reported",
     "raw": "0.14",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.098,
     "max": 101.098,
     "quality": "reported",
     "raw": "758.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.67,
     "max": 2.67,
     "quality": "reported",
     "raw": "2.67",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-08",
     "quality": "reported",
     "raw": "9/8/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/217",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N05M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 217,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.26,
     "max": 26.26,
     "quality": "reported",
     "raw": "299.41",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-221_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.41",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-221_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 9.5,
     "max": 9.5,
     "quality": "reported",
     "raw": "9.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.36,
     "max": 0.36,
     "quality": "reported",
     "raw": "0.36",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. The droplet drifts E then S and out of the SE corner of the HiBMS FOV just after visible flame extinction. The flame oscillates for several seconds before radiative extinction. The flame is very difficult to discern in the LLUV view. The flame luminosity barely registers on the LLUV. The color camera IPSU did not record any images for this test.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. The droplet drifts E then S and out of the SE corner of the HiBMS FOV just after visible flame extinction. The flame oscillates for several seconds before radiative extinction. The flame is very difficult to discern in the LLUV view. The flame luminosity barely registers on the LLUV. The color camera IPSU did not record any images for this test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-221_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. The droplet drifts E then S and out of the SE corner of the HiBMS FOV just after visible flame extinction. The flame oscillates for several seconds before radiative extinction. The flame is very difficult to discern in the LLUV view. The flame luminosity barely registers on the LLUV. The color camera IPSU did not record any images for this test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-221_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.96,
     "max": 2.96,
     "quality": "reported",
     "raw": "2.96",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-221_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-221_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.87,
     "max": 0.87,
     "quality": "reported",
     "raw": "0.87",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.13,
     "max": 0.13,
     "quality": "reported",
     "raw": "0.13",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.245,
     "max": 101.245,
     "quality": "reported",
     "raw": "759.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.46,
     "max": 3.46,
     "quality": "reported",
     "raw": "3.46",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-08",
     "quality": "reported",
     "raw": "9/8/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/218",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N05M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 218,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.55,
     "max": 26.55,
     "quality": "reported",
     "raw": "299.70",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-222_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.70",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-222_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 16.3,
     "max": 16.3,
     "quality": "reported",
     "raw": "16.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. Droplet stays in HiBMS FOV for most of the test. For a short period of time, right around visible flame extinction, the droplet drifts partially out of the FOV. It drifts back into the HiBMS FOV for the remainder of the HiBMS IPSU-1 recording time. The flame is very dim, barely obove the background level in both the LLUV and color Cameras. The extinction droplet diameter results from interpolating the droplet history from when the droplet leaves the HiBMS FOV to when it re-enters a short time after visible flame extinction. The interpolation polynomial is a fourth order polynomial with the constraint that the values and burning rate constants at both ends match the experimental values.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. Droplet stays in HiBMS FOV for most of the test. For a short period of time, right around visible flame extinction, the droplet drifts partially out of the FOV. It drifts back into the HiBMS FOV for the remainder of the HiBMS IPSU-1 recording time. The flame is very dim, barely obove the background level in both the LLUV and color Cameras. The extinction droplet diameter results from interpolating the droplet history from when the droplet leaves the HiBMS FOV to when it re-enters a short time after visible flame extinction. The interpolation polynomial is a fourth order polynomial with the constraint that the values and burning rate constants at both ends match the experimental values.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-222_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.13/0.87 O2/N2, 1.0 atm ambient environment. Droplet stays in HiBMS FOV for most of the test. For a short period of time, right around visible flame extinction, the droplet drifts partially out of the FOV. It drifts back into the HiBMS FOV for the remainder of the HiBMS IPSU-1 recording time. The flame is very dim, barely obove the background level in both the LLUV and color Cameras. The extinction droplet diameter results from interpolating the droplet history from when the droplet leaves the HiBMS FOV to when it re-enters a short time after visible flame extinction. The interpolation polynomial is a fourth order polynomial with the constraint that the values and burning rate constants at both ends match the experimental values.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-222_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.46,
     "max": 1.46,
     "quality": "reported",
     "raw": "1.46",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-222_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-222_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.87,
     "max": 0.87,
     "quality": "reported",
     "raw": "0.87",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.13,
     "max": 0.13,
     "quality": "reported",
     "raw": "0.13",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.405,
     "max": 101.405,
     "quality": "reported",
     "raw": "760.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.75,
     "max": 2.75,
     "quality": "reported",
     "raw": "2.75",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-08",
     "quality": "reported",
     "raw": "9/8/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/219",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N06M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 219,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.13,
     "max": 25.13,
     "quality": "reported",
     "raw": "298.28",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-223_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.28",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-223_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 6.9,
     "max": 6.9,
     "quality": "reported",
     "raw": "6.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.36,
     "max": 0.36,
     "quality": "reported",
     "raw": "0.36",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.12/0.88 O2/N2, 1.0 atm ambient environment. The droplet deployed and ignited with almost no residual motion. The droplet drifted a little S and then E in the HiBMS FOV, but remained in the FOV of the HiBMS, LLUV and color cameras for the entire recording time.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.12/0.88 O2/N2, 1.0 atm ambient environment. The droplet deployed and ignited with almost no residual motion. The droplet drifted a little S and then E in the HiBMS FOV, but remained in the FOV of the HiBMS, LLUV and color cameras for the entire recording time.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-223_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.12/0.88 O2/N2, 1.0 atm ambient environment. The droplet deployed and ignited with almost no residual motion. The droplet drifted a little S and then E in the HiBMS FOV, but remained in the FOV of the HiBMS, LLUV and color cameras for the entire recording time.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-223_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.09,
     "max": 2.09,
     "quality": "reported",
     "raw": "2.09",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-223_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-223_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.88,
     "max": 0.88,
     "quality": "reported",
     "raw": "0.88",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.12,
     "max": 0.12,
     "quality": "reported",
     "raw": "0.12",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.538,
     "max": 101.538,
     "quality": "reported",
     "raw": "761.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.6,
     "max": 2.6,
     "quality": "reported",
     "raw": "2.6",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-09",
     "quality": "reported",
     "raw": "9/9/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/220",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N06M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 220,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.33,
     "max": 25.33,
     "quality": "reported",
     "raw": "298.48",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-224_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.48",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-224_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 7.8,
     "max": 7.8,
     "quality": "reported",
     "raw": "7.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.12/0.88 O2/N2, 1.0 atm ambient environment. The droplet drifts N after deployment and ignition and out of the HiBMS FOV about 3/4ths of the way through the burn. The flame grows, then shrinks in response to the shrinking droplet. The flame is very dim and difficult to see in the LLUV. This is likely diffusive extinction. The extinction droplet diameter results from extrapolating the droplet history to the time the flame extinguishes using the measured burning rate constant while the droplet is within the FOV.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.12/0.88 O2/N2, 1.0 atm ambient environment. The droplet drifts N after deployment and ignition and out of the HiBMS FOV about 3/4ths of the way through the burn. The flame grows, then shrinks in response to the shrinking droplet. The flame is very dim and difficult to see in the LLUV. This is likely diffusive extinction. The extinction droplet diameter results from extrapolating the droplet history to the time the flame extinguishes using the measured burning rate constant while the droplet is within the FOV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-224_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.12/0.88 O2/N2, 1.0 atm ambient environment. The droplet drifts N after deployment and ignition and out of the HiBMS FOV about 3/4ths of the way through the burn. The flame grows, then shrinks in response to the shrinking droplet. The flame is very dim and difficult to see in the LLUV. This is likely diffusive extinction. The extinction droplet diameter results from extrapolating the droplet history to the time the flame extinguishes using the measured burning rate constant while the droplet is within the FOV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-224_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.05,
     "max": 1.05,
     "quality": "reported",
     "raw": "1.05",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-224_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-224_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.88,
     "max": 0.88,
     "quality": "reported",
     "raw": "0.88",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.12,
     "max": 0.12,
     "quality": "reported",
     "raw": "0.12",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.578,
     "max": 101.578,
     "quality": "reported",
     "raw": "761.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.94,
     "max": 1.94,
     "quality": "reported",
     "raw": "1.94",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-09",
     "quality": "reported",
     "raw": "9/9/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/221",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N06M202",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 221,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.84,
     "max": 25.84,
     "quality": "reported",
     "raw": "298.99",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-225_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.99",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-225_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 6,
     "max": 6,
     "quality": "reported",
     "raw": "6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.38,
     "max": 0.38,
     "quality": "reported",
     "raw": "0.38",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.12/0.88 O2/N2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment/ignition, then starts to drift slowly E, but then chnages direction and quickly drifts W in HiBMS FOV. The droplet leaves the HiBMS FOV about 3/4ths of the way through the burn. The flame is very dim, but does appear to grow, reach a maximum and then decrease in size in response to the shrinking droplet. The extinction droplet diameter is based on extrapolating the droplet history to the time of extinction (as measured by the LLUV) using the burning rate constant measured from the last part of the droplet history while it is still in the HiBMS FOV. This is likely diffusive extinction with a significant contribution from radiative loss. The color camera IPSU did not record any images after deployment.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.12/0.88 O2/N2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment/ignition, then starts to drift slowly E, but then chnages direction and quickly drifts W in HiBMS FOV. The droplet leaves the HiBMS FOV about 3/4ths of the way through the burn. The flame is very dim, but does appear to grow, reach a maximum and then decrease in size in response to the shrinking droplet. The extinction droplet diameter is based on extrapolating the droplet history to the time of extinction (as measured by the LLUV) using the burning rate constant measured from the last part of the droplet history while it is still in the HiBMS FOV. This is likely diffusive extinction with a significant contribution from radiative loss. The color camera IPSU did not record any images after deployment.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-225_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.12/0.88 O2/N2, 1.0 atm ambient environment. The droplet is nearly motionless after deployment/ignition, then starts to drift slowly E, but then chnages direction and quickly drifts W in HiBMS FOV. The droplet leaves the HiBMS FOV about 3/4ths of the way through the burn. The flame is very dim, but does appear to grow, reach a maximum and then decrease in size in response to the shrinking droplet. The extinction droplet diameter is based on extrapolating the droplet history to the time of extinction (as measured by the LLUV) using the burning rate constant measured from the last part of the droplet history while it is still in the HiBMS FOV. This is likely diffusive extinction with a significant contribution from radiative loss. The color camera IPSU did not record any images after deployment.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-225_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.04,
     "max": 1.04,
     "quality": "reported",
     "raw": "1.04",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-225_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-225_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.88,
     "max": 0.88,
     "quality": "reported",
     "raw": "0.88",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.12,
     "max": 0.12,
     "quality": "reported",
     "raw": "0.12",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.818,
     "max": 101.818,
     "quality": "reported",
     "raw": "763.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.84,
     "max": 1.84,
     "quality": "reported",
     "raw": "1.84",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-09",
     "quality": "reported",
     "raw": "9/9/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/222",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H01M102",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 222,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.62,
     "max": 26.62,
     "quality": "reported",
     "raw": "299.77",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-226_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.77",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-226_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 14.4,
     "max": 14.4,
     "quality": "reported",
     "raw": "14.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.51,
     "max": 0.51,
     "quality": "reported",
     "raw": "0.51",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.20/0.75/0.05 O2/N2/He, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition, but then starts to drift SE in HiBMS FOV a few seconds after ignition. The droplet drifts out of the HiBMS FOV, but remains in the LLUV and color camera FOVs. The color camera IPSU failed to record any images after deployment. The droplet burns for a relatively long time before a diffusive extinction. The extinction droplet diameter comes from extrapolating the droplet history from the time the droplet leaves the HiBMS FOV until extinction using the burning rate constant from a short period just prior to the droplet leaving the HiBMS FOV.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.20/0.75/0.05 O2/N2/He, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition, but then starts to drift SE in HiBMS FOV a few seconds after ignition. The droplet drifts out of the HiBMS FOV, but remains in the LLUV and color camera FOVs. The color camera IPSU failed to record any images after deployment. The droplet burns for a relatively long time before a diffusive extinction. The extinction droplet diameter comes from extrapolating the droplet history from the time the droplet leaves the HiBMS FOV until extinction using the burning rate constant from a short period just prior to the droplet leaving the HiBMS FOV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-226_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.20/0.75/0.05 O2/N2/He, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition, but then starts to drift SE in HiBMS FOV a few seconds after ignition. The droplet drifts out of the HiBMS FOV, but remains in the LLUV and color camera FOVs. The color camera IPSU failed to record any images after deployment. The droplet burns for a relatively long time before a diffusive extinction. The extinction droplet diameter comes from extrapolating the droplet history from the time the droplet leaves the HiBMS FOV until extinction using the burning rate constant from a short period just prior to the droplet leaving the HiBMS FOV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-226_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.12,
     "max": 1.12,
     "quality": "reported",
     "raw": "1.12",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-226_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-226_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.05,
     "max": 0.05,
     "quality": "reported",
     "raw": "0.05",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.218,
     "max": 101.218,
     "quality": "reported",
     "raw": "759.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.91,
     "max": 2.91,
     "quality": "reported",
     "raw": "2.91",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-09",
     "quality": "reported",
     "raw": "9/9/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/223",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H01M104",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 223,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.71,
     "max": 26.71,
     "quality": "reported",
     "raw": "299.86",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-227_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.86",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-227_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 6,
     "max": 6,
     "approx": true,
     "quality": "reported",
     "raw": "~6",
     "column": "Burn time; s"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet in a 0.20/0.75.0.05 O2/N2/He, 1.0 atm ambient environment. The HiBMS IPSU failed to start and thus no droplet data was recorded. The flame was bright and burned for over 5 seconds until a (presumed) diffusive extinction.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet in a 0.20/0.75.0.05 O2/N2/He, 1.0 atm ambient environment. The HiBMS IPSU failed to start and thus no droplet data was recorded. The flame was bright and burned for over 5 seconds until a (presumed) diffusive extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-227_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet in a 0.20/0.75.0.05 O2/N2/He, 1.0 atm ambient environment. The HiBMS IPSU failed to start and thus no droplet data was recorded. The flame was bright and burned for over 5 seconds until a (presumed) diffusive extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-227_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-227_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-227_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.05,
     "max": 0.05,
     "quality": "reported",
     "raw": "0.05",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.272,
     "max": 101.272,
     "quality": "reported",
     "raw": "759.6",
     "column": "Ambient pressure; mmHg"
    },
    "test_date": {
     "text": "2011-09-09",
     "quality": "reported",
     "raw": "9/9/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/224",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H01H102",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 224,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.12,
     "max": 25.12,
     "quality": "reported",
     "raw": "298.27",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-229_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.27",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-229_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 9,
     "max": 9,
     "approx": true,
     "quality": "reported",
     "raw": "~9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.57,
     "max": 0.57,
     "quality": "reported",
     "raw": "0.57",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.20/0.75.0.05 O2/N2/He, 1.0 atm ambient environment. The droplet drifts SE after deployment in the HiBMS FOV, hits the igniter and develops a large drift velocity E. The droplet drifts out of the HiBMS FOV and then the LLUV and color cameras before either extinction or burn-out.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.20/0.75.0.05 O2/N2/He, 1.0 atm ambient environment. The droplet drifts SE after deployment in the HiBMS FOV, hits the igniter and develops a large drift velocity E. The droplet drifts out of the HiBMS FOV and then the LLUV and color cameras before either extinction or burn-out.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-229_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.20/0.75.0.05 O2/N2/He, 1.0 atm ambient environment. The droplet drifts SE after deployment in the HiBMS FOV, hits the igniter and develops a large drift velocity E. The droplet drifts out of the HiBMS FOV and then the LLUV and color cameras before either extinction or burn-out.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-229_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-229_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-229_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.05,
     "max": 0.05,
     "quality": "reported",
     "raw": "0.05",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.75,
     "max": 0.75,
     "quality": "reported",
     "raw": "0.75",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 100.698,
     "max": 100.698,
     "quality": "reported",
     "raw": "755.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.25,
     "max": 2.25,
     "quality": "reported",
     "raw": "2.25",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-13",
     "quality": "reported",
     "raw": "9/13/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/225",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H02M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 225,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 24.05,
     "max": 24.05,
     "quality": "reported",
     "raw": "297.20",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-231_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 297.20",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-231_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 12.5,
     "max": 12.5,
     "quality": "reported",
     "raw": "12.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.57,
     "max": 0.57,
     "quality": "reported",
     "raw": "0.57",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.19/0.71/0.10 O2/N2/He, 1.0 atm ambient environment. The droplet has a pronounced drift S in the HiBMS FOV after deployment, strikes the igniter and continues to drift S and out of the HiBMS FOV about 1/3rd of the way through the burn. The droplet burns for a relatively long time to a diffusive extinction. The color camera IPSU did not record any images after deployment for this test. There is no extinction droplet diameter listed for this test because of the short fraction of the total test the droplet was within the HiBMS FOV.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.19/0.71/0.10 O2/N2/He, 1.0 atm ambient environment. The droplet has a pronounced drift S in the HiBMS FOV after deployment, strikes the igniter and continues to drift S and out of the HiBMS FOV about 1/3rd of the way through the burn. The droplet burns for a relatively long time to a diffusive extinction. The color camera IPSU did not record any images after deployment for this test. There is no extinction droplet diameter listed for this test because of the short fraction of the total test the droplet was within the HiBMS FOV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-231_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.19/0.71/0.10 O2/N2/He, 1.0 atm ambient environment. The droplet has a pronounced drift S in the HiBMS FOV after deployment, strikes the igniter and continues to drift S and out of the HiBMS FOV about 1/3rd of the way through the burn. The droplet burns for a relatively long time to a diffusive extinction. The color camera IPSU did not record any images after deployment for this test. There is no extinction droplet diameter listed for this test because of the short fraction of the total test the droplet was within the HiBMS FOV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-231_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-231_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-231_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.1,
     "max": 0.1,
     "quality": "reported",
     "raw": "0.1",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.71,
     "max": 0.71,
     "quality": "reported",
     "raw": "0.71",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.19,
     "max": 0.19,
     "quality": "reported",
     "raw": "0.19",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 100.445,
     "max": 100.445,
     "quality": "reported",
     "raw": "753.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.78,
     "max": 2.78,
     "quality": "reported",
     "raw": "2.78",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-21",
     "quality": "reported",
     "raw": "9/21/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/226",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H03M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 226,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.29,
     "max": 25.29,
     "quality": "reported",
     "raw": "298.44",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-232_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.44",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-232_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 12.5,
     "max": 12.5,
     "quality": "reported",
     "raw": "12.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.51,
     "max": 0.51,
     "quality": "reported",
     "raw": "0.51",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/He, 1.0 atm ambient environment. The droplet slowly drifts S after deployment and ignition in the HiBMS FOV, but never leaves the FOV. Diffusive extinction with no disruption.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/He, 1.0 atm ambient environment. The droplet slowly drifts S after deployment and ignition in the HiBMS FOV, but never leaves the FOV. Diffusive extinction with no disruption.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-232_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.18/0.67/0.15 O2/N2/He, 1.0 atm ambient environment. The droplet slowly drifts S after deployment and ignition in the HiBMS FOV, but never leaves the FOV. Diffusive extinction with no disruption.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-232_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.3,
     "max": 1.3,
     "quality": "reported",
     "raw": "1.3",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-232_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-232_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.218,
     "max": 101.218,
     "quality": "reported",
     "raw": "759.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.79,
     "max": 2.79,
     "quality": "reported",
     "raw": "2.79",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-22",
     "quality": "reported",
     "raw": "9/22/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/227",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H03M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 227,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.73,
     "max": 25.73,
     "quality": "reported",
     "raw": "298.88",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-233_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.88",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-233_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 11.7,
     "max": 11.7,
     "quality": "reported",
     "raw": "11.7",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.53,
     "max": 0.53,
     "quality": "reported",
     "raw": "0.53",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet burning in a 0.18/0.67/0.15 O2/N2/He, 1.0 atm ambient environment. The droplet moves slowly and smoothly W on the fiber in the HiBMS FOV after ignition. The droplet drifts to the edge of the HiBMS FOV, but remains in the FOV. There is some small oscillatory motion on the fiber, but it is a relatively clean burn until diffusive extinction.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet burning in a 0.18/0.67/0.15 O2/N2/He, 1.0 atm ambient environment. The droplet moves slowly and smoothly W on the fiber in the HiBMS FOV after ignition. The droplet drifts to the edge of the HiBMS FOV, but remains in the FOV. There is some small oscillatory motion on the fiber, but it is a relatively clean burn until diffusive extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-233_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet burning in a 0.18/0.67/0.15 O2/N2/He, 1.0 atm ambient environment. The droplet moves slowly and smoothly W on the fiber in the HiBMS FOV after ignition. The droplet drifts to the edge of the HiBMS FOV, but remains in the FOV. There is some small oscillatory motion on the fiber, but it is a relatively clean burn until diffusive extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-233_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.67,
     "max": 1.67,
     "quality": "reported",
     "raw": "1.67",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-233_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-233_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.365,
     "max": 101.365,
     "quality": "reported",
     "raw": "760.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.95,
     "max": 2.95,
     "quality": "reported",
     "raw": "2.95",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-22",
     "quality": "reported",
     "raw": "9/22/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/228",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N01H401",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 228,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.84,
     "max": 25.84,
     "quality": "reported",
     "raw": "298.99",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-234_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.99",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-234_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 17.5,
     "max": 17.5,
     "quality": "reported",
     "raw": "17.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.21/0.79 O2/N2, 1.0 atm or nominally air ambient environment. The droplet drifts SE and out of the HiBMS FOV about 1/2 of the way through the burn. The flame begins to oscillate and then drifts S and out of the LLUV FOV before extinction. The Color camera IPSU did not record any images during the burn. It is unclear whether the droplet continued to burn in the LLUV FOV and for how long. The oscillations are significant, but the flame appears to be decreasing in size . From the radiometer, it appears that the droplet burns with a stable flame after the flame oscillations stop.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.21/0.79 O2/N2, 1.0 atm or nominally air ambient environment. The droplet drifts SE and out of the HiBMS FOV about 1/2 of the way through the burn. The flame begins to oscillate and then drifts S and out of the LLUV FOV before extinction. The Color camera IPSU did not record any images during the burn. It is unclear whether the droplet continued to burn in the LLUV FOV and for how long. The oscillations are significant, but the flame appears to be decreasing in size . From the radiometer, it appears that the droplet burns with a stable flame after the flame oscillations stop.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-234_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.21/0.79 O2/N2, 1.0 atm or nominally air ambient environment. The droplet drifts SE and out of the HiBMS FOV about 1/2 of the way through the burn. The flame begins to oscillate and then drifts S and out of the LLUV FOV before extinction. The Color camera IPSU did not record any images during the burn. It is unclear whether the droplet continued to burn in the LLUV FOV and for how long. The oscillations are significant, but the flame appears to be decreasing in size . From the radiometer, it appears that the droplet burns with a stable flame after the flame oscillations stop.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-234_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.37,
     "max": 1.37,
     "quality": "reported",
     "raw": "1.37",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-234_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-234_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.312,
     "max": 102.312,
     "quality": "reported",
     "raw": "767.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.32,
     "max": 3.32,
     "quality": "reported",
     "raw": "3.32",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-23",
     "quality": "reported",
     "raw": "9/23/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/229",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N01H502",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 229,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.14,
     "max": 26.14,
     "quality": "reported",
     "raw": "299.29",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-235_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.29",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-235_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 10.6,
     "max": 10.6,
     "quality": "reported",
     "raw": "10.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.57,
     "max": 0.57,
     "quality": "reported",
     "raw": "0.57",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.21/0.79 O2/N2, 1.0 atm (nominally air) ambient environment. The droplet stays in HiBMS FOV for most of lifetime. The droplet burns to a very small size, with a small disruption coincident with visible flame extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.21/0.79 O2/N2, 1.0 atm (nominally air) ambient environment. The droplet stays in HiBMS FOV for most of lifetime. The droplet burns to a very small size, with a small disruption coincident with visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-235_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.21/0.79 O2/N2, 1.0 atm (nominally air) ambient environment. The droplet stays in HiBMS FOV for most of lifetime. The droplet burns to a very small size, with a small disruption coincident with visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-235_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-235_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-235_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.405,
     "max": 102.405,
     "quality": "reported",
     "raw": "768.1",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.39,
     "max": 2.39,
     "quality": "reported",
     "raw": "2.39",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-24",
     "quality": "reported",
     "raw": "9/24/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/230",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "N01H601",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 230,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.37,
     "max": 26.37,
     "quality": "reported",
     "raw": "299.52",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-236_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.52",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-236_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 9.6,
     "max": 9.6,
     "quality": "reported",
     "raw": "9.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.57,
     "max": 0.57,
     "quality": "reported",
     "raw": "0.57",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet burning in a 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet has oscillations on the fiber throughout the burn, but remains in the HiBMS FOV. Large soot agglomerates interfere with the droplet size measurement for a portion of the burn. The flame radiatively extinguishes after a very long, slow, high amplitude oscillation. This is followed by rapid vaporization with vapor cloud coincident with the plateau. The droplet moves during the vaporization but it doesn't seem to inpact the size measurement significantly. There is a small disruption near the end of the vaporization and a small jump in droplet size, maybe a gas bubble that bursts. There was likely a cool flame and cool flame extinction following the visible flame extinction.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet burning in a 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet has oscillations on the fiber throughout the burn, but remains in the HiBMS FOV. Large soot agglomerates interfere with the droplet size measurement for a portion of the burn. The flame radiatively extinguishes after a very long, slow, high amplitude oscillation. This is followed by rapid vaporization with vapor cloud coincident with the plateau. The droplet moves during the vaporization but it doesn't seem to inpact the size measurement significantly. There is a small disruption near the end of the vaporization and a small jump in droplet size, maybe a gas bubble that bursts. There was likely a cool flame and cool flame extinction following the visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-236_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet burning in a 0.21/0.79 O2/N2, 1.0 atm ambient environment. The droplet has oscillations on the fiber throughout the burn, but remains in the HiBMS FOV. Large soot agglomerates interfere with the droplet size measurement for a portion of the burn. The flame radiatively extinguishes after a very long, slow, high amplitude oscillation. This is followed by rapid vaporization with vapor cloud coincident with the plateau. The droplet moves during the vaporization but it doesn't seem to inpact the size measurement significantly. There is a small disruption near the end of the vaporization and a small jump in droplet size, maybe a gas bubble that bursts. There was likely a cool flame and cool flame extinction following the visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-236_TestSheet.txt"
    },
    "diluent": {
     "text": "N2",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.85,
     "max": 2.85,
     "quality": "reported",
     "raw": "2.85",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-236_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-236_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.79,
     "max": 0.79,
     "quality": "reported",
     "raw": "0.79",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.552,
     "max": 102.552,
     "quality": "reported",
     "raw": "769.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.65,
     "max": 3.65,
     "quality": "reported",
     "raw": "3.65",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-24",
     "quality": "reported",
     "raw": "9/24/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/231",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H02H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 231,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.56,
     "max": 26.56,
     "quality": "reported",
     "raw": "299.71",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-237_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.71",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-237_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 12,
     "max": 12,
     "quality": "reported",
     "raw": "12",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.54,
     "max": 0.54,
     "quality": "reported",
     "raw": "0.54",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.19/0.71/0.10 O2/N2/He, 1.0 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition and just out of the FOV before flame extinction/disruption. There may have been a disruption coincident with flame extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.19/0.71/0.10 O2/N2/He, 1.0 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition and just out of the FOV before flame extinction/disruption. There may have been a disruption coincident with flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-237_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.19/0.71/0.10 O2/N2/He, 1.0 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment and ignition and just out of the FOV before flame extinction/disruption. There may have been a disruption coincident with flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-237_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-237_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-237_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.1,
     "max": 0.1,
     "quality": "reported",
     "raw": "0.1",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.71,
     "max": 0.71,
     "quality": "reported",
     "raw": "0.71",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.19,
     "max": 0.19,
     "quality": "reported",
     "raw": "0.19",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.165,
     "max": 101.165,
     "quality": "reported",
     "raw": "758.8",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.59,
     "max": 2.59,
     "quality": "reported",
     "raw": "2.59",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-24",
     "quality": "reported",
     "raw": "9/24/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/232",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H03H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 232,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 24.29,
     "max": 24.29,
     "quality": "reported",
     "raw": "297.44",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-238_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 297.44",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-238_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 4.1,
     "max": 4.1,
     "quality": "reported",
     "raw": "4.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.41,
     "max": 0.41,
     "quality": "reported",
     "raw": "0.41",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/He, 1.0 atm ambient environment. The droplet is almost motionless after deployment and ignition. This is a large droplet and stays in HiBMS FOV for the entire test. The flame grows and continually gets dimmer after ignition and quickly extinguishes due to radiative loss. After visible flame extinction, the droplet continues vaporize at almost the same rate until a plateau well after flame extinction. The plateau is coincident with the formation of a large vapor cloud. Both are indicative of cool flame burning and extinction after visible flame extinction. The color camera IPSU did not record any images after deployment.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/He, 1.0 atm ambient environment. The droplet is almost motionless after deployment and ignition. This is a large droplet and stays in HiBMS FOV for the entire test. The flame grows and continually gets dimmer after ignition and quickly extinguishes due to radiative loss. After visible flame extinction, the droplet continues vaporize at almost the same rate until a plateau well after flame extinction. The plateau is coincident with the formation of a large vapor cloud. Both are indicative of cool flame burning and extinction after visible flame extinction. The color camera IPSU did not record any images after deployment.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-238_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/He, 1.0 atm ambient environment. The droplet is almost motionless after deployment and ignition. This is a large droplet and stays in HiBMS FOV for the entire test. The flame grows and continually gets dimmer after ignition and quickly extinguishes due to radiative loss. After visible flame extinction, the droplet continues vaporize at almost the same rate until a plateau well after flame extinction. The plateau is coincident with the formation of a large vapor cloud. Both are indicative of cool flame burning and extinction after visible flame extinction. The color camera IPSU did not record any images after deployment.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-238_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.28,
     "max": 3.28,
     "quality": "reported",
     "raw": "3.28",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-238_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-238_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.818,
     "max": 101.818,
     "quality": "reported",
     "raw": "763.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.52,
     "max": 3.52,
     "quality": "reported",
     "raw": "3.52",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-27",
     "quality": "reported",
     "raw": "9/27/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/233",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H03H201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 233,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.01,
     "max": 25.01,
     "quality": "reported",
     "raw": "298.16",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-239_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.16",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-239_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 9.1,
     "max": 9.1,
     "quality": "reported",
     "raw": "9.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/He, 1.0 atm ambient environment. The droplet drifts N after deployment and ignition and out of the HiBMS FOV 1/3rd of the way through the burn. The flame remains in the FOV of both the LLUV and color camera for the duration of the burn. The flame is bright and very luminous from soot oxidation initially, but quickly becomes dimmer blue. The luminosity increases slightly as the flame gets near extinction. Because the droplet is out of the HiBMS FOV for the majority of the test, there is no extinction diameter reported.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/He, 1.0 atm ambient environment. The droplet drifts N after deployment and ignition and out of the HiBMS FOV 1/3rd of the way through the burn. The flame remains in the FOV of both the LLUV and color camera for the duration of the burn. The flame is bright and very luminous from soot oxidation initially, but quickly becomes dimmer blue. The luminosity increases slightly as the flame gets near extinction. Because the droplet is out of the HiBMS FOV for the majority of the test, there is no extinction diameter reported.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-239_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/He, 1.0 atm ambient environment. The droplet drifts N after deployment and ignition and out of the HiBMS FOV 1/3rd of the way through the burn. The flame remains in the FOV of both the LLUV and color camera for the duration of the burn. The flame is bright and very luminous from soot oxidation initially, but quickly becomes dimmer blue. The luminosity increases slightly as the flame gets near extinction. Because the droplet is out of the HiBMS FOV for the majority of the test, there is no extinction diameter reported.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-239_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-239_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-239_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.112,
     "max": 102.112,
     "quality": "reported",
     "raw": "765.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.3,
     "max": 2.3,
     "quality": "reported",
     "raw": "2.3",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-27",
     "quality": "reported",
     "raw": "9/27/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/234",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H03H202",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 234,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.33,
     "max": 25.33,
     "quality": "reported",
     "raw": "298.48",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-240_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.48",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-240_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8.6,
     "max": 8.6,
     "quality": "reported",
     "raw": "8.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.51,
     "max": 0.51,
     "quality": "reported",
     "raw": "0.51",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/He, 1.0 atm ambient environment. The droplet drifts N after deployment and ignition and out of HiBMS FOV about 1/4th of the way through the burn. The drift velocity is relatively high and the flame is brighter on the leading edge in the direction of the drift. The droplet does stay in the FOV of both the LLUV and Color cameras. There is no extinction diameter for this test because it was in the HiBMS FOV for such a small fraction of the burn. The color camera IPSU did not record any images after deployment for this test.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/He, 1.0 atm ambient environment. The droplet drifts N after deployment and ignition and out of HiBMS FOV about 1/4th of the way through the burn. The drift velocity is relatively high and the flame is brighter on the leading edge in the direction of the drift. The droplet does stay in the FOV of both the LLUV and Color cameras. There is no extinction diameter for this test because it was in the HiBMS FOV for such a small fraction of the burn. The color camera IPSU did not record any images after deployment for this test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-240_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.18/0.67/0.15 O2/N2/He, 1.0 atm ambient environment. The droplet drifts N after deployment and ignition and out of HiBMS FOV about 1/4th of the way through the burn. The drift velocity is relatively high and the flame is brighter on the leading edge in the direction of the drift. The droplet does stay in the FOV of both the LLUV and Color cameras. There is no extinction diameter for this test because it was in the HiBMS FOV for such a small fraction of the burn. The color camera IPSU did not record any images after deployment for this test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-240_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-240_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-240_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.192,
     "max": 102.192,
     "quality": "reported",
     "raw": "766.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.27,
     "max": 2.27,
     "quality": "reported",
     "raw": "2.27",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-27",
     "quality": "reported",
     "raw": "9/27/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/235",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H04H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 235,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.9,
     "max": 25.9,
     "quality": "reported",
     "raw": "299.05",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-241_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.05",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-241_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 3.2,
     "max": 3.2,
     "quality": "reported",
     "raw": "3.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.46,
     "max": 0.46,
     "quality": "reported",
     "raw": "0.46",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.17/0.63/0.20 O2/N2/He, 1.0 atm ambient environment. The droplet has almost no drift after deployment and ignition and stays in the HiBMS, LLUV and color camera FOVs with little motion throughout the IPSU recording time. The flame radiatively extinguishes, there if a brief period after visible flame extinction where the droplet continues to vaporize at a nearly constant rate indicating that there was a cool flame after visible flame extinction. The color camera IPSU did not record any images after deployment.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.17/0.63/0.20 O2/N2/He, 1.0 atm ambient environment. The droplet has almost no drift after deployment and ignition and stays in the HiBMS, LLUV and color camera FOVs with little motion throughout the IPSU recording time. The flame radiatively extinguishes, there if a brief period after visible flame extinction where the droplet continues to vaporize at a nearly constant rate indicating that there was a cool flame after visible flame extinction. The color camera IPSU did not record any images after deployment.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-241_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.17/0.63/0.20 O2/N2/He, 1.0 atm ambient environment. The droplet has almost no drift after deployment and ignition and stays in the HiBMS, LLUV and color camera FOVs with little motion throughout the IPSU recording time. The flame radiatively extinguishes, there if a brief period after visible flame extinction where the droplet continues to vaporize at a nearly constant rate indicating that there was a cool flame after visible flame extinction. The color camera IPSU did not record any images after deployment.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-241_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.6,
     "max": 2.6,
     "quality": "reported",
     "raw": "2.6",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-241_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-241_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.63,
     "max": 0.63,
     "quality": "reported",
     "raw": "0.63",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.232,
     "max": 101.232,
     "quality": "reported",
     "raw": "759.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.85,
     "max": 2.85,
     "quality": "reported",
     "raw": "2.85",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-27",
     "quality": "reported",
     "raw": "9/27/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/236",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H04H201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 236,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.01,
     "max": 26.01,
     "quality": "reported",
     "raw": "299.16",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-242_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.16",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-242_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 4.5,
     "max": 4.5,
     "quality": "reported",
     "raw": "4.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.17/0.63/0.20 O2/N2/He, 1.0 atm ambient environment. The droplet has almost no drift after deployment and ignition, moving slightly to the SE in the HiBMS FOV but remaining in the FOV of all the cameras for the entire test. The color camera IPSU failed to record any images after deployment. The flame extinguished after approximately 5 sec and that is likely followed by cool flame burning and extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.17/0.63/0.20 O2/N2/He, 1.0 atm ambient environment. The droplet has almost no drift after deployment and ignition, moving slightly to the SE in the HiBMS FOV but remaining in the FOV of all the cameras for the entire test. The color camera IPSU failed to record any images after deployment. The flame extinguished after approximately 5 sec and that is likely followed by cool flame burning and extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-242_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.17/0.63/0.20 O2/N2/He, 1.0 atm ambient environment. The droplet has almost no drift after deployment and ignition, moving slightly to the SE in the HiBMS FOV but remaining in the FOV of all the cameras for the entire test. The color camera IPSU failed to record any images after deployment. The flame extinguished after approximately 5 sec and that is likely followed by cool flame burning and extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-242_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.39,
     "max": 1.39,
     "quality": "reported",
     "raw": "1.39",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-242_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-242_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.63,
     "max": 0.63,
     "quality": "reported",
     "raw": "0.63",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.232,
     "max": 101.232,
     "quality": "reported",
     "raw": "759.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.12,
     "max": 2.12,
     "quality": "reported",
     "raw": "2.12",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-27",
     "quality": "reported",
     "raw": "9/27/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/237",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H04H302",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 237,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.23,
     "max": 26.23,
     "quality": "reported",
     "raw": "299.38",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-243_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.38",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-243_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 1.7,
     "max": 1.7,
     "quality": "reported",
     "raw": "1.7",
     "column": "Burn time; s"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet burning in a 0.17/0.63 O2/N2, 1.0 atm ambient environment. Neither the HiBMS or color camera IPSUs recorded any images for this test. The droplet burns for a short time to disruption.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet burning in a 0.17/0.63 O2/N2, 1.0 atm ambient environment. Neither the HiBMS or color camera IPSUs recorded any images for this test. The droplet burns for a short time to disruption.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-243_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet burning in a 0.17/0.63 O2/N2, 1.0 atm ambient environment. Neither the HiBMS or color camera IPSUs recorded any images for this test. The droplet burns for a short time to disruption.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-243_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-243_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-243_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.63,
     "max": 0.63,
     "quality": "reported",
     "raw": "0.63",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.272,
     "max": 101.272,
     "quality": "reported",
     "raw": "759.6",
     "column": "Ambient pressure; mmHg"
    },
    "test_date": {
     "text": "2011-09-27",
     "quality": "reported",
     "raw": "9/27/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/238",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H04H303",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 238,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.26,
     "max": 26.26,
     "quality": "reported",
     "raw": "299.41",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-244_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.41",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-244_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 2.7,
     "max": 2.7,
     "quality": "reported",
     "raw": "2.7",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.91,
     "max": 0.91,
     "quality": "reported",
     "raw": "0.91",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet burning in a 0.17/0.63/0.20 O2/N2/He, 1.0 atm ambient environment. This is a smaller droplet. After ignition there is a lot of motion on the fiber, not really disruptive burning where the droplet becomes dislodged from the fiber, but the motion clearly influences the burning history. The droplet burned to completion. The color camera did not record to the on-board IPSU for this test.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet burning in a 0.17/0.63/0.20 O2/N2/He, 1.0 atm ambient environment. This is a smaller droplet. After ignition there is a lot of motion on the fiber, not really disruptive burning where the droplet becomes dislodged from the fiber, but the motion clearly influences the burning history. The droplet burned to completion. The color camera did not record to the on-board IPSU for this test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-244_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet burning in a 0.17/0.63/0.20 O2/N2/He, 1.0 atm ambient environment. This is a smaller droplet. After ignition there is a lot of motion on the fiber, not really disruptive burning where the droplet becomes dislodged from the fiber, but the motion clearly influences the burning history. The droplet burned to completion. The color camera did not record to the on-board IPSU for this test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-244_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-244_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-244_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.63,
     "max": 0.63,
     "quality": "reported",
     "raw": "0.63",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.298,
     "max": 101.298,
     "quality": "reported",
     "raw": "759.8",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.61,
     "max": 1.61,
     "quality": "reported",
     "raw": "1.61",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-09-27",
     "quality": "reported",
     "raw": "9/27/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/239",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H04M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 239,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 23.91,
     "max": 23.91,
     "quality": "reported",
     "raw": "297.06",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-245_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 297.06",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-245_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 9.1,
     "max": 9.1,
     "quality": "reported",
     "raw": "9.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet in a 0.17/0.63/0.20 O2/N2/He, 1.0 atm ambient environment. The droplet has a strong N to NE drift after deployment, nearly hitting the ingiter before it withdrew. The droplet has a relatively high drift velocity after ignition and only stays in the HiBMS FOV for a short fraction (1/4th) of the burn. There is no extinction diameter listed because of the short time the droplet is within the FOV. The droplet burns to diffusive extinction.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet in a 0.17/0.63/0.20 O2/N2/He, 1.0 atm ambient environment. The droplet has a strong N to NE drift after deployment, nearly hitting the ingiter before it withdrew. The droplet has a relatively high drift velocity after ignition and only stays in the HiBMS FOV for a short fraction (1/4th) of the burn. There is no extinction diameter listed because of the short time the droplet is within the FOV. The droplet burns to diffusive extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-245_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet in a 0.17/0.63/0.20 O2/N2/He, 1.0 atm ambient environment. The droplet has a strong N to NE drift after deployment, nearly hitting the ingiter before it withdrew. The droplet has a relatively high drift velocity after ignition and only stays in the HiBMS FOV for a short fraction (1/4th) of the burn. There is no extinction diameter listed because of the short time the droplet is within the FOV. The droplet burns to diffusive extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-245_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-245_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-245_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.63,
     "max": 0.63,
     "quality": "reported",
     "raw": "0.63",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 100.552,
     "max": 100.552,
     "quality": "reported",
     "raw": "754.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.99,
     "max": 2.99,
     "quality": "reported",
     "raw": "2.99",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-10-01",
     "quality": "reported",
     "raw": "10/1/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/240",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H04M202",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 240,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 24.74,
     "max": 24.74,
     "quality": "reported",
     "raw": "297.89",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-246_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 297.89",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-246_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 13.1,
     "max": 13.1,
     "quality": "reported",
     "raw": "13.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.51,
     "max": 0.51,
     "quality": "reported",
     "raw": "0.51",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.17/0.63/0.20 O2/N2/He, 1.0 atm ambient environment. The droplet has almost no drift after deployment and ignition, but then develops a slow drift NE, then E in the color camera FOV shortly into the burn. The droplet leaves the HiBMS FOV near diffusive flame extinction. The extinction droplet diameter comes from extrapolating the droplet history from the time the droplet leaves the HiBMS FOV until flame extinction using the measured burning rate constant while the droplet is within the HiBMS FOV. The diameter should be reasonably accurate since the flame extinguishes only a short time after leaving the HiBMS FOV.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.17/0.63/0.20 O2/N2/He, 1.0 atm ambient environment. The droplet has almost no drift after deployment and ignition, but then develops a slow drift NE, then E in the color camera FOV shortly into the burn. The droplet leaves the HiBMS FOV near diffusive flame extinction. The extinction droplet diameter comes from extrapolating the droplet history from the time the droplet leaves the HiBMS FOV until flame extinction using the measured burning rate constant while the droplet is within the HiBMS FOV. The diameter should be reasonably accurate since the flame extinguishes only a short time after leaving the HiBMS FOV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-246_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.17/0.63/0.20 O2/N2/He, 1.0 atm ambient environment. The droplet has almost no drift after deployment and ignition, but then develops a slow drift NE, then E in the color camera FOV shortly into the burn. The droplet leaves the HiBMS FOV near diffusive flame extinction. The extinction droplet diameter comes from extrapolating the droplet history from the time the droplet leaves the HiBMS FOV until flame extinction using the measured burning rate constant while the droplet is within the HiBMS FOV. The diameter should be reasonably accurate since the flame extinguishes only a short time after leaving the HiBMS FOV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-246_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.42,
     "max": 1.42,
     "quality": "reported",
     "raw": "1.42",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-246_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-246_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.63,
     "max": 0.63,
     "quality": "reported",
     "raw": "0.63",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 100.925,
     "max": 100.925,
     "quality": "reported",
     "raw": "757",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.9,
     "max": 2.9,
     "quality": "reported",
     "raw": "2.9",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-10-01",
     "quality": "reported",
     "raw": "10/1/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/241",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H05M102",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 241,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.65,
     "max": 25.65,
     "quality": "reported",
     "raw": "298.80",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-247_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.80",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-247_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 7.9,
     "max": 7.9,
     "quality": "reported",
     "raw": "7.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.51,
     "max": 0.51,
     "quality": "reported",
     "raw": "0.51",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.16/0.59/0.25 O2/N2/He, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition and remains in the FOV of all the cameras for the entire recording time. It is difficult to say whether this is diffusive or radiative extinction. It is likely near the flammability boundary. The MDCA Color Camera did not record anything beyond droplet deployment on-board for this test.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.16/0.59/0.25 O2/N2/He, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition and remains in the FOV of all the cameras for the entire recording time. It is difficult to say whether this is diffusive or radiative extinction. It is likely near the flammability boundary. The MDCA Color Camera did not record anything beyond droplet deployment on-board for this test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-247_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.16/0.59/0.25 O2/N2/He, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition and remains in the FOV of all the cameras for the entire recording time. It is difficult to say whether this is diffusive or radiative extinction. It is likely near the flammability boundary. The MDCA Color Camera did not record anything beyond droplet deployment on-board for this test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-247_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.79,
     "max": 2.79,
     "quality": "reported",
     "raw": "2.79",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-247_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-247_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.16,
     "max": 0.16,
     "quality": "reported",
     "raw": "0.16",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.312,
     "max": 101.312,
     "quality": "reported",
     "raw": "759.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.4,
     "max": 3.4,
     "quality": "reported",
     "raw": "3.4",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-10-01",
     "quality": "reported",
     "raw": "10/1/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/242",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H05M202",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 242,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.05,
     "max": 26.05,
     "quality": "reported",
     "raw": "299.20",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-248_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.20",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-248_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5",
     "column": "Burn time; s"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.16/0.59/0.25 O2/N2/He, 1.0 atm ambient environment. The HiBMS IPSU did not record any images for this test. There was only a very small drift S in color camera FOV, but stays in FOV for entire test (as well as the LLUV FOV). The droplet burned to extinction.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.16/0.59/0.25 O2/N2/He, 1.0 atm ambient environment. The HiBMS IPSU did not record any images for this test. There was only a very small drift S in color camera FOV, but stays in FOV for entire test (as well as the LLUV FOV). The droplet burned to extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-248_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.16/0.59/0.25 O2/N2/He, 1.0 atm ambient environment. The HiBMS IPSU did not record any images for this test. There was only a very small drift S in color camera FOV, but stays in FOV for entire test (as well as the LLUV FOV). The droplet burned to extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-248_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-248_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-248_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.16,
     "max": 0.16,
     "quality": "reported",
     "raw": "0.16",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.458,
     "max": 101.458,
     "quality": "reported",
     "raw": "761",
     "column": "Ambient pressure; mmHg"
    },
    "test_date": {
     "text": "2011-10-01",
     "quality": "reported",
     "raw": "10/1/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/243",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H05H103",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 243,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.14,
     "max": 25.14,
     "quality": "reported",
     "raw": "298.29",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-249_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.29",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-249_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 2.9,
     "max": 2.9,
     "quality": "reported",
     "raw": "2.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.6,
     "max": 0.6,
     "quality": "reported",
     "raw": "0.6",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.16/0.59/0.25 O2/N2/He, 1.0 atm ambient environment. This is a smaller droplet that is nearly motionless after deployment and ignition. It stays in the FOV of all the cameras. The flame surrounding the droplet extinguishes at a very small size, near the limit of what we can reasonably measure. The flame size is nearly constant throughout the burn, decreasing only slightly towards the end of the burn after only slightly increasing in size initially. The flame standoff increases linearly throughout the burn.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.16/0.59/0.25 O2/N2/He, 1.0 atm ambient environment. This is a smaller droplet that is nearly motionless after deployment and ignition. It stays in the FOV of all the cameras. The flame surrounding the droplet extinguishes at a very small size, near the limit of what we can reasonably measure. The flame size is nearly constant throughout the burn, decreasing only slightly towards the end of the burn after only slightly increasing in size initially. The flame standoff increases linearly throughout the burn.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-249_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.16/0.59/0.25 O2/N2/He, 1.0 atm ambient environment. This is a smaller droplet that is nearly motionless after deployment and ignition. It stays in the FOV of all the cameras. The flame surrounding the droplet extinguishes at a very small size, near the limit of what we can reasonably measure. The flame size is nearly constant throughout the burn, decreasing only slightly towards the end of the burn after only slightly increasing in size initially. The flame standoff increases linearly throughout the burn.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-249_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.69,
     "max": 0.69,
     "quality": "reported",
     "raw": "0.69",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-249_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-249_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.16,
     "max": 0.16,
     "quality": "reported",
     "raw": "0.16",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.045,
     "max": 101.045,
     "quality": "reported",
     "raw": "757.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.49,
     "max": 1.49,
     "quality": "reported",
     "raw": "1.49",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-10-05",
     "quality": "reported",
     "raw": "10/5/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/244",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H06M102",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 244,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 24.43,
     "max": 24.43,
     "quality": "reported",
     "raw": "297.58",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-250_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 297.58",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-250_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 3.6,
     "max": 3.6,
     "quality": "reported",
     "raw": "3.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.43,
     "max": 0.43,
     "quality": "reported",
     "raw": "0.43",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet burning in a 0.15/0.55/0.30 O2/N2/He, 1.0 atm ambient environment. There is a small amount of axial motion on the fiber, but it doesn't seem to influence the burning behavior to a large degree. This is a relatively short, transient burn; likely radiative extincion.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet burning in a 0.15/0.55/0.30 O2/N2/He, 1.0 atm ambient environment. There is a small amount of axial motion on the fiber, but it doesn't seem to influence the burning behavior to a large degree. This is a relatively short, transient burn; likely radiative extincion.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-250_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet burning in a 0.15/0.55/0.30 O2/N2/He, 1.0 atm ambient environment. There is a small amount of axial motion on the fiber, but it doesn't seem to influence the burning behavior to a large degree. This is a relatively short, transient burn; likely radiative extincion.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-250_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.47,
     "max": 3.47,
     "quality": "reported",
     "raw": "3.47",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-250_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-250_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.55,
     "max": 0.55,
     "quality": "reported",
     "raw": "0.55",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 100.738,
     "max": 100.738,
     "quality": "reported",
     "raw": "755.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.67,
     "max": 3.67,
     "quality": "reported",
     "raw": "3.67",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-10-07",
     "quality": "reported",
     "raw": "10/7/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/245",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H06M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 245,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.09,
     "max": 25.09,
     "quality": "reported",
     "raw": "298.24",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-251_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.24",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-251_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.15/0.55/0.30 O2/N2/He, 1.0 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition. It remains in the FOV for the duration of the burn, leaving shortly after visible flame extinction. This ambient environment is likely near flammability boundary so it is difficult to determine whether it was diffusive or radiative extinction.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.15/0.55/0.30 O2/N2/He, 1.0 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition. It remains in the FOV for the duration of the burn, leaving shortly after visible flame extinction. This ambient environment is likely near flammability boundary so it is difficult to determine whether it was diffusive or radiative extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-251_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.15/0.55/0.30 O2/N2/He, 1.0 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition. It remains in the FOV for the duration of the burn, leaving shortly after visible flame extinction. This ambient environment is likely near flammability boundary so it is difficult to determine whether it was diffusive or radiative extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-251_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.06,
     "max": 2.06,
     "quality": "reported",
     "raw": "2.06",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-251_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-251_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.55,
     "max": 0.55,
     "quality": "reported",
     "raw": "0.55",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 100.885,
     "max": 100.885,
     "quality": "reported",
     "raw": "756.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.52,
     "max": 2.52,
     "quality": "reported",
     "raw": "2.52",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-10-07",
     "quality": "reported",
     "raw": "10/7/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/246",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H07M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 246,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.63,
     "max": 25.63,
     "quality": "reported",
     "raw": "298.78",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-252_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.78",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-252_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.14/0.51/0.35 O2/N2/He, 1.0 atm ambient environment. The droplet has a slow SE drift in the HiBMS FOV after deployment and ignition. The droplet leaves the HiBMS FOV well after visible flame extinction, but then drifts back into the HiBMS FOV before the end of the recording period. The droplet burned for a short time before flame extinction.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.14/0.51/0.35 O2/N2/He, 1.0 atm ambient environment. The droplet has a slow SE drift in the HiBMS FOV after deployment and ignition. The droplet leaves the HiBMS FOV well after visible flame extinction, but then drifts back into the HiBMS FOV before the end of the recording period. The droplet burned for a short time before flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-252_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.14/0.51/0.35 O2/N2/He, 1.0 atm ambient environment. The droplet has a slow SE drift in the HiBMS FOV after deployment and ignition. The droplet leaves the HiBMS FOV well after visible flame extinction, but then drifts back into the HiBMS FOV before the end of the recording period. The droplet burned for a short time before flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-252_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.26,
     "max": 2.26,
     "quality": "reported",
     "raw": "2.26",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-252_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-252_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.51,
     "max": 0.51,
     "quality": "reported",
     "raw": "0.51",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.14,
     "max": 0.14,
     "quality": "reported",
     "raw": "0.14",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.218,
     "max": 101.218,
     "quality": "reported",
     "raw": "759.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.44,
     "max": 2.44,
     "quality": "reported",
     "raw": "2.44",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-10-07",
     "quality": "reported",
     "raw": "10/7/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/247",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H07M202",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 247,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.9,
     "max": 25.9,
     "quality": "reported",
     "raw": "299.05",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-253_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.05",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-253_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 1,
     "max": 1,
     "quality": "reported",
     "raw": "1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.58,
     "max": 0.58,
     "quality": "reported",
     "raw": "0.58",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.14/0.51/0.35 O2/N2/He, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition in the HiBMS FOV. It starts to drift S as it burns and leaves the FOV well after visible flame extinction. The droplet burns for only a very short time and the flame is very dim, almost undetectable in both the LLUV and Color Cameras. The droplet is very near or even below the flammability limit.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.14/0.51/0.35 O2/N2/He, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition in the HiBMS FOV. It starts to drift S as it burns and leaves the FOV well after visible flame extinction. The droplet burns for only a very short time and the flame is very dim, almost undetectable in both the LLUV and Color Cameras. The droplet is very near or even below the flammability limit.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-253_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.14/0.51/0.35 O2/N2/He, 1.0 atm ambient environment. The droplet is nearly motionless after deployment and ignition in the HiBMS FOV. It starts to drift S as it burns and leaves the FOV well after visible flame extinction. The droplet burns for only a very short time and the flame is very dim, almost undetectable in both the LLUV and Color Cameras. The droplet is very near or even below the flammability limit.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-253_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.73,
     "max": 1.73,
     "quality": "reported",
     "raw": "1.73",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-253_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-253_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.51,
     "max": 0.51,
     "quality": "reported",
     "raw": "0.51",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.14,
     "max": 0.14,
     "quality": "reported",
     "raw": "0.14",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.298,
     "max": 101.298,
     "quality": "reported",
     "raw": "759.8",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.88,
     "max": 1.88,
     "quality": "reported",
     "raw": "1.88",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-10-07",
     "quality": "reported",
     "raw": "10/7/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/248",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H08M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 248,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25,
     "max": 25,
     "quality": "reported",
     "raw": "298.15",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-254_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.15",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-254_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.51,
     "max": 0.51,
     "quality": "reported",
     "raw": "0.51",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.13/0.47/0.40 O2/N2/He, 1.0 atm ambient environment. The droplet stays in HiBMS FOV for the entire recording period. Very short burn to extinction. This is likely below the flammability limit.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.13/0.47/0.40 O2/N2/He, 1.0 atm ambient environment. The droplet stays in HiBMS FOV for the entire recording period. Very short burn to extinction. This is likely below the flammability limit.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-254_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.13/0.47/0.40 O2/N2/He, 1.0 atm ambient environment. The droplet stays in HiBMS FOV for the entire recording period. Very short burn to extinction. This is likely below the flammability limit.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-254_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.54,
     "max": 3.54,
     "quality": "reported",
     "raw": "3.54",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-254_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-254_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.47,
     "max": 0.47,
     "quality": "reported",
     "raw": "0.47",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.13,
     "max": 0.13,
     "quality": "reported",
     "raw": "0.13",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.792,
     "max": 101.792,
     "quality": "reported",
     "raw": "763.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.56,
     "max": 3.56,
     "quality": "reported",
     "raw": "3.56",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-10-11",
     "quality": "reported",
     "raw": "10/11/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/249",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H10H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 249,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 24.86,
     "max": 24.86,
     "quality": "reported",
     "raw": "298.01",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-255_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.01",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-255_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 12.2,
     "max": 12.2,
     "quality": "reported",
     "raw": "12.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.72,
     "max": 0.72,
     "quality": "reported",
     "raw": "0.72",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/He, 0.70 atm ambient envrionment. The droplet drifts out of HiBMS FOV (but remains in the FOV of the LLUV and Color Camera) close to extinction. There is a small vapor cloud formed at extinction. There is noise in the analysis of the droplet image because of soot particles formed during combustion that interfere with the analysis. It is unclear whether this is radiative or diffusive extinction or if there was a cool flame after visible flame extinction.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/He, 0.70 atm ambient envrionment. The droplet drifts out of HiBMS FOV (but remains in the FOV of the LLUV and Color Camera) close to extinction. There is a small vapor cloud formed at extinction. There is noise in the analysis of the droplet image because of soot particles formed during combustion that interfere with the analysis. It is unclear whether this is radiative or diffusive extinction or if there was a cool flame after visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-255_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.24/0.56/0.20 O2/N2/He, 0.70 atm ambient envrionment. The droplet drifts out of HiBMS FOV (but remains in the FOV of the LLUV and Color Camera) close to extinction. There is a small vapor cloud formed at extinction. There is noise in the analysis of the droplet image because of soot particles formed during combustion that interfere with the analysis. It is unclear whether this is radiative or diffusive extinction or if there was a cool flame after visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-255_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.52,
     "max": 2.52,
     "quality": "reported",
     "raw": "2.52",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-255_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-255_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.24,
     "max": 0.24,
     "quality": "reported",
     "raw": "0.24",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.1942,
     "max": 71.1942,
     "quality": "reported",
     "raw": "534",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.78,
     "max": 3.78,
     "quality": "reported",
     "raw": "3.78",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-10-12",
     "quality": "reported",
     "raw": "10/12/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/250",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H11H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 250,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.87,
     "max": 25.87,
     "quality": "reported",
     "raw": "299.02",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-256_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.02",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-256_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 11.4,
     "max": 11.4,
     "quality": "reported",
     "raw": "11.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.71,
     "max": 0.71,
     "quality": "reported",
     "raw": "0.71",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.23/0.52/0.25 O2/N2/He, 0.70 atm ambient environment. The droplet drifts E after deployment and ignition in the HiBMS FOV leaving the FOV just prior to extinction or burnout. The droplet burns to a very small size and then appears to disrupt or rapidly change direction after the droplet leaves the HiBMS FOV. The extinction droplet diameter comes from extrapolating the droplet history from the time it leaves the FOV until flame extinction using the measured burning rate constant. The small extinction droplet size suggests that the droplet burned almost to completion.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.23/0.52/0.25 O2/N2/He, 0.70 atm ambient environment. The droplet drifts E after deployment and ignition in the HiBMS FOV leaving the FOV just prior to extinction or burnout. The droplet burns to a very small size and then appears to disrupt or rapidly change direction after the droplet leaves the HiBMS FOV. The extinction droplet diameter comes from extrapolating the droplet history from the time it leaves the FOV until flame extinction using the measured burning rate constant. The small extinction droplet size suggests that the droplet burned almost to completion.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-256_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.23/0.52/0.25 O2/N2/He, 0.70 atm ambient environment. The droplet drifts E after deployment and ignition in the HiBMS FOV leaving the FOV just prior to extinction or burnout. The droplet burns to a very small size and then appears to disrupt or rapidly change direction after the droplet leaves the HiBMS FOV. The extinction droplet diameter comes from extrapolating the droplet history from the time it leaves the FOV until flame extinction using the measured burning rate constant. The small extinction droplet size suggests that the droplet burned almost to completion.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-256_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.12,
     "max": 0.12,
     "quality": "reported",
     "raw": "0.12",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-256_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-256_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.23,
     "max": 0.23,
     "quality": "reported",
     "raw": "0.23",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.9542,
     "max": 70.9542,
     "quality": "reported",
     "raw": "532.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.8,
     "max": 2.8,
     "quality": "reported",
     "raw": "2.8",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-10-12",
     "quality": "reported",
     "raw": "10/12/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/251",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H10M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 251,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.74,
     "max": 26.74,
     "quality": "reported",
     "raw": "299.89",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-257_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.89",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-257_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 11.2,
     "max": 11.2,
     "quality": "reported",
     "raw": "11.2",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.62,
     "max": 0.62,
     "quality": "reported",
     "raw": "0.62",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.24/0.56/0.20 O2/N2/He, 0.70 atm ambient environment. The droplet drifts SE in the HiBMS FOV after deployment and ignition. It stops briefly at the corner of the FOV and then disappears from the FOV (there one frame, gone the next) at a time coincident with visible flame extinction. The droplet may have moved to just outside the FOV after the flame extinguished. The droplet burned nicely to a diffusive extinction. The extinction droplet diameter is the droplet diameter in the frame just before the droplet disappears.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.24/0.56/0.20 O2/N2/He, 0.70 atm ambient environment. The droplet drifts SE in the HiBMS FOV after deployment and ignition. It stops briefly at the corner of the FOV and then disappears from the FOV (there one frame, gone the next) at a time coincident with visible flame extinction. The droplet may have moved to just outside the FOV after the flame extinguished. The droplet burned nicely to a diffusive extinction. The extinction droplet diameter is the droplet diameter in the frame just before the droplet disappears.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-257_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.24/0.56/0.20 O2/N2/He, 0.70 atm ambient environment. The droplet drifts SE in the HiBMS FOV after deployment and ignition. It stops briefly at the corner of the FOV and then disappears from the FOV (there one frame, gone the next) at a time coincident with visible flame extinction. The droplet may have moved to just outside the FOV after the flame extinguished. The droplet burned nicely to a diffusive extinction. The extinction droplet diameter is the droplet diameter in the frame just before the droplet disappears.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-257_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.03,
     "max": 1.03,
     "quality": "reported",
     "raw": "1.03",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-257_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-257_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.24,
     "max": 0.24,
     "quality": "reported",
     "raw": "0.24",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.2342,
     "max": 71.2342,
     "quality": "reported",
     "raw": "534.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.82,
     "max": 2.82,
     "quality": "reported",
     "raw": "2.82",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-11-18",
     "quality": "reported",
     "raw": "11/18/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/252",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H10M102",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 252,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.13,
     "max": 27.13,
     "quality": "reported",
     "raw": "300.28",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-258_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.28",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-258_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8.1,
     "max": 8.1,
     "quality": "reported",
     "raw": "8.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet burning in a 0.24/0.56/0.20 O2/N2/He, 0.70 atm ambient environment. The droplet remains in the HiBMS FOV but there is a lot of motion on the fiber and eventually the droplet disrupts and becomes dislodged from the fiber. There is no extinction droplet diameter reported as a result of the disruption.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet burning in a 0.24/0.56/0.20 O2/N2/He, 0.70 atm ambient environment. The droplet remains in the HiBMS FOV but there is a lot of motion on the fiber and eventually the droplet disrupts and becomes dislodged from the fiber. There is no extinction droplet diameter reported as a result of the disruption.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-258_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet burning in a 0.24/0.56/0.20 O2/N2/He, 0.70 atm ambient environment. The droplet remains in the HiBMS FOV but there is a lot of motion on the fiber and eventually the droplet disrupts and becomes dislodged from the fiber. There is no extinction droplet diameter reported as a result of the disruption.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-258_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.53,
     "max": 1.53,
     "quality": "reported",
     "raw": "1.53",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-258_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-258_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.24,
     "max": 0.24,
     "quality": "reported",
     "raw": "0.24",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.2742,
     "max": 71.2742,
     "quality": "reported",
     "raw": "534.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.79,
     "max": 2.79,
     "quality": "reported",
     "raw": "2.79",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-11-18",
     "quality": "reported",
     "raw": "11/18/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/253",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H11M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 253,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.34,
     "max": 27.34,
     "quality": "reported",
     "raw": "300.49",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-259_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.49",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-259_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 8.3,
     "max": 8.3,
     "quality": "reported",
     "raw": "8.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.6,
     "max": 0.6,
     "quality": "reported",
     "raw": "0.6",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet in a 0.23/0.52/0.25 O2/N2/He, 0.70 atm ambient environment. The droplet drifts SE in the HiBMS FOV after ignition and out of FOV right near diffusive extinction. The extinction droplet diameter is extrapolated from the droplet history from the time the droplet leaves the HiBMS FOV until visible flame extinction using the burning rate constant from the last part of the burn while the droplet is within the FOV.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet in a 0.23/0.52/0.25 O2/N2/He, 0.70 atm ambient environment. The droplet drifts SE in the HiBMS FOV after ignition and out of FOV right near diffusive extinction. The extinction droplet diameter is extrapolated from the droplet history from the time the droplet leaves the HiBMS FOV until visible flame extinction using the burning rate constant from the last part of the burn while the droplet is within the FOV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-259_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet in a 0.23/0.52/0.25 O2/N2/He, 0.70 atm ambient environment. The droplet drifts SE in the HiBMS FOV after ignition and out of FOV right near diffusive extinction. The extinction droplet diameter is extrapolated from the droplet history from the time the droplet leaves the HiBMS FOV until visible flame extinction using the burning rate constant from the last part of the burn while the droplet is within the FOV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-259_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.86,
     "max": 0.86,
     "quality": "reported",
     "raw": "0.86",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-259_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-259_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.23,
     "max": 0.23,
     "quality": "reported",
     "raw": "0.23",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.8875,
     "max": 70.8875,
     "quality": "reported",
     "raw": "531.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.45,
     "max": 2.45,
     "quality": "reported",
     "raw": "2.45",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-11-18",
     "quality": "reported",
     "raw": "11/18/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/254",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H11M102",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 254,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.49,
     "max": 27.49,
     "quality": "reported",
     "raw": "300.64",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-260_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.64",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-260_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 6.3,
     "max": 6.3,
     "quality": "reported",
     "raw": "6.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.73,
     "max": 0.73,
     "quality": "reported",
     "raw": "0.73",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet burning in a 0.23/0.52/0.25 O2/N2/He, 0.70 atm ambient environment. The droplet remains in the HiBMS FOV and there is very little motion on the fiber until very close to visible flame extinction when the droplet gets dislodged from the fiber. Because flame extinction occurs when the droplet disrupts off of the fiber, there is not extinction droplet diameter listed.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet burning in a 0.23/0.52/0.25 O2/N2/He, 0.70 atm ambient environment. The droplet remains in the HiBMS FOV and there is very little motion on the fiber until very close to visible flame extinction when the droplet gets dislodged from the fiber. Because flame extinction occurs when the droplet disrupts off of the fiber, there is not extinction droplet diameter listed.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-260_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet burning in a 0.23/0.52/0.25 O2/N2/He, 0.70 atm ambient environment. The droplet remains in the HiBMS FOV and there is very little motion on the fiber until very close to visible flame extinction when the droplet gets dislodged from the fiber. Because flame extinction occurs when the droplet disrupts off of the fiber, there is not extinction droplet diameter listed.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-260_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "disruption",
     "quality": "reported",
     "raw": "Disruption",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-260_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-260_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.25,
     "max": 0.25,
     "quality": "reported",
     "raw": "0.25",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.52,
     "max": 0.52,
     "quality": "reported",
     "raw": "0.52",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.23,
     "max": 0.23,
     "quality": "reported",
     "raw": "0.23",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.9009,
     "max": 70.9009,
     "quality": "reported",
     "raw": "531.8",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.61,
     "max": 2.61,
     "quality": "reported",
     "raw": "2.61",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-11-18",
     "quality": "reported",
     "raw": "11/18/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/255",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H12M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 255,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.6,
     "max": 27.6,
     "quality": "reported",
     "raw": "300.75",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-261_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.75",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-261_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 10.4,
     "max": 10.4,
     "quality": "reported",
     "raw": "10.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.56,
     "max": 0.56,
     "quality": "reported",
     "raw": "0.56",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet in a 0.21/0.49/0.30 O2/N2/He, 0.70 atm ambient environment. The droplet drifts NW in the HiBMS FOV after deployment, hits the igniter and then drifts quickly S after ignition. The droplet leaves the HiBMS FOV shortly after ignition so only a small portion of the droplet burning history is captured. It also leaves the color camera FOV. Because only a short part of the burning history is captured, there is no extinction droplet diameter listed and the burning rate constant is likely inaccurate.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet in a 0.21/0.49/0.30 O2/N2/He, 0.70 atm ambient environment. The droplet drifts NW in the HiBMS FOV after deployment, hits the igniter and then drifts quickly S after ignition. The droplet leaves the HiBMS FOV shortly after ignition so only a small portion of the droplet burning history is captured. It also leaves the color camera FOV. Because only a short part of the burning history is captured, there is no extinction droplet diameter listed and the burning rate constant is likely inaccurate.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-261_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet in a 0.21/0.49/0.30 O2/N2/He, 0.70 atm ambient environment. The droplet drifts NW in the HiBMS FOV after deployment, hits the igniter and then drifts quickly S after ignition. The droplet leaves the HiBMS FOV shortly after ignition so only a small portion of the droplet burning history is captured. It also leaves the color camera FOV. Because only a short part of the burning history is captured, there is no extinction droplet diameter listed and the burning rate constant is likely inaccurate.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-261_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-261_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-261_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.9142,
     "max": 70.9142,
     "quality": "reported",
     "raw": "531.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.22,
     "max": 3.22,
     "quality": "reported",
     "raw": "3.22",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-11-18",
     "quality": "reported",
     "raw": "11/18/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/256",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H12M102",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 256,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.32,
     "max": 27.32,
     "quality": "reported",
     "raw": "300.47",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-262_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.47",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-262_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 12.1,
     "max": 12.1,
     "quality": "reported",
     "raw": "12.1",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.65,
     "max": 0.65,
     "quality": "reported",
     "raw": "0.65",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet in a 0.21/0.49/0.30 O2/N2/He, 0.70 atm ambient environment. The droplet drifts SE in the HiBMS FOV after deployment, hits the igniter then begins to drift slowly NW after ignition. The droplet leaves the HiBMS FOV before extinction, but most of the burning history is captured by the HiBMS. The droplet burns for a long time before diffusive extinction. The extinction droplet diameter is extrapolated fom the droplet size history from the time the droplet leaves the HiBMS FOV until visible flame extinction using the measured burning rate constant from the time period just before the droplet leaves the HiBMS FOV.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet in a 0.21/0.49/0.30 O2/N2/He, 0.70 atm ambient environment. The droplet drifts SE in the HiBMS FOV after deployment, hits the igniter then begins to drift slowly NW after ignition. The droplet leaves the HiBMS FOV before extinction, but most of the burning history is captured by the HiBMS. The droplet burns for a long time before diffusive extinction. The extinction droplet diameter is extrapolated fom the droplet size history from the time the droplet leaves the HiBMS FOV until visible flame extinction using the measured burning rate constant from the time period just before the droplet leaves the HiBMS FOV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-262_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet in a 0.21/0.49/0.30 O2/N2/He, 0.70 atm ambient environment. The droplet drifts SE in the HiBMS FOV after deployment, hits the igniter then begins to drift slowly NW after ignition. The droplet leaves the HiBMS FOV before extinction, but most of the burning history is captured by the HiBMS. The droplet burns for a long time before diffusive extinction. The extinction droplet diameter is extrapolated fom the droplet size history from the time the droplet leaves the HiBMS FOV until visible flame extinction using the measured burning rate constant from the time period just before the droplet leaves the HiBMS FOV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-262_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.78,
     "max": 1.78,
     "quality": "reported",
     "raw": "1.78",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-262_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-262_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.8209,
     "max": 70.8209,
     "quality": "reported",
     "raw": "531.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.25,
     "max": 3.25,
     "quality": "reported",
     "raw": "3.25",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-11-18",
     "quality": "reported",
     "raw": "11/18/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/257",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H12M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 257,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.42,
     "max": 27.42,
     "quality": "reported",
     "raw": "300.57",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-263_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.57",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-263_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 7.6,
     "max": 7.6,
     "quality": "reported",
     "raw": "7.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet burning in a 0.21/0.49/0.30 O2/N2/He, 0.70 atm ambient environment. The droplet drifts slowly E along the fiber in the HiBMS FOV after deployment and ignition. There is a little disruptive motion on the fiber during the burning history. This is a diffusive extinction.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet burning in a 0.21/0.49/0.30 O2/N2/He, 0.70 atm ambient environment. The droplet drifts slowly E along the fiber in the HiBMS FOV after deployment and ignition. There is a little disruptive motion on the fiber during the burning history. This is a diffusive extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-263_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet burning in a 0.21/0.49/0.30 O2/N2/He, 0.70 atm ambient environment. The droplet drifts slowly E along the fiber in the HiBMS FOV after deployment and ignition. There is a little disruptive motion on the fiber during the burning history. This is a diffusive extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-263_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.42,
     "max": 1.42,
     "quality": "reported",
     "raw": "1.42",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-263_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-263_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.8209,
     "max": 70.8209,
     "quality": "reported",
     "raw": "531.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.67,
     "max": 2.67,
     "quality": "reported",
     "raw": "2.67",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-11-18",
     "quality": "reported",
     "raw": "11/18/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/258",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H12H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 258,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.12,
     "max": 26.12,
     "quality": "reported",
     "raw": "299.27",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-264_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.27",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-264_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 7.5,
     "max": 7.5,
     "quality": "reported",
     "raw": "7.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet in a 0.21/.0.49/0.30 O2/N2/He, 0.7 atm ambient environment. The droplet stays in HiBMS FOV for the entire test. The flame grows to a maximum size shortly after ignition and then stays at a constant size until flame extinction. It is unclear whether this is diffusive or radiative extinction. There is no evidence of prolonged cool flame burning after visible flame extinction (no rapid vaporization after or vapor cloud formation in the color camera).",
     "quality": "reported",
     "raw": "Free-floating heptane droplet in a 0.21/.0.49/0.30 O2/N2/He, 0.7 atm ambient environment. The droplet stays in HiBMS FOV for the entire test. The flame grows to a maximum size shortly after ignition and then stays at a constant size until flame extinction. It is unclear whether this is diffusive or radiative extinction. There is no evidence of prolonged cool flame burning after visible flame extinction (no rapid vaporization after or vapor cloud formation in the color camera).",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-264_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet in a 0.21/.0.49/0.30 O2/N2/He, 0.7 atm ambient environment. The droplet stays in HiBMS FOV for the entire test. The flame grows to a maximum size shortly after ignition and then stays at a constant size until flame extinction. It is unclear whether this is diffusive or radiative extinction. There is no evidence of prolonged cool flame burning after visible flame extinction (no rapid vaporization after or vapor cloud formation in the color camera).",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-264_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.33,
     "max": 2.33,
     "quality": "reported",
     "raw": "2.33",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-264_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-264_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.6075,
     "max": 70.6075,
     "quality": "reported",
     "raw": "529.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.23,
     "max": 3.23,
     "quality": "reported",
     "raw": "3.23",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-11-22",
     "quality": "reported",
     "raw": "11/22/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/259",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H12H201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 259,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.66,
     "max": 26.66,
     "quality": "reported",
     "raw": "299.81",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-265_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.81",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-265_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 11,
     "max": 11,
     "quality": "reported",
     "raw": "11",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.7,
     "max": 0.7,
     "quality": "reported",
     "raw": "0.7",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.21/0.49/0.30 O2/N2/He, 0.70 atm ambient environment. The droplet stays in the HiBMS FOV (and the FOV of all the cameras) for the entire test. The flame grows, reaches a maximum size and then decreases in size until diffusive extinction at a very small size. Shortly after extinction, the droplet appears to disrupt and disappears from the HiBMS FOV.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.21/0.49/0.30 O2/N2/He, 0.70 atm ambient environment. The droplet stays in the HiBMS FOV (and the FOV of all the cameras) for the entire test. The flame grows, reaches a maximum size and then decreases in size until diffusive extinction at a very small size. Shortly after extinction, the droplet appears to disrupt and disappears from the HiBMS FOV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-265_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.21/0.49/0.30 O2/N2/He, 0.70 atm ambient environment. The droplet stays in the HiBMS FOV (and the FOV of all the cameras) for the entire test. The flame grows, reaches a maximum size and then decreases in size until diffusive extinction at a very small size. Shortly after extinction, the droplet appears to disrupt and disappears from the HiBMS FOV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-265_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.71,
     "max": 0.71,
     "quality": "reported",
     "raw": "0.71",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-265_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-265_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.3,
     "max": 0.3,
     "quality": "reported",
     "raw": "0.3",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.49,
     "max": 0.49,
     "quality": "reported",
     "raw": "0.49",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.5275,
     "max": 70.5275,
     "quality": "reported",
     "raw": "529",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.86,
     "max": 2.86,
     "quality": "reported",
     "raw": "2.86",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-11-22",
     "quality": "reported",
     "raw": "11/22/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/260",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H13H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 260,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 27.45,
     "max": 27.45,
     "quality": "reported",
     "raw": "300.60",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-266_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.60",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-266_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 4.3,
     "max": 4.3,
     "quality": "reported",
     "raw": "4.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.61,
     "max": 0.61,
     "quality": "reported",
     "raw": "0.61",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.20/0.45/0.35 O2/N2/CO2, 0.70 atm ambient environment. The droplet stays in HiBMS FOV (and the FOV of all cameras) for the entire test. The flame grows continusously after ignition, radiatively extinguishing after approximately 5 seconds. Ther appears to be no cool flame or only a very brief one (no significant vaporization after extinction and also no vapor cloud formation in the color camera view).",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.20/0.45/0.35 O2/N2/CO2, 0.70 atm ambient environment. The droplet stays in HiBMS FOV (and the FOV of all cameras) for the entire test. The flame grows continusously after ignition, radiatively extinguishing after approximately 5 seconds. Ther appears to be no cool flame or only a very brief one (no significant vaporization after extinction and also no vapor cloud formation in the color camera view).",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-266_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.20/0.45/0.35 O2/N2/CO2, 0.70 atm ambient environment. The droplet stays in HiBMS FOV (and the FOV of all cameras) for the entire test. The flame grows continusously after ignition, radiatively extinguishing after approximately 5 seconds. Ther appears to be no cool flame or only a very brief one (no significant vaporization after extinction and also no vapor cloud formation in the color camera view).",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-266_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 3.32,
     "max": 3.32,
     "quality": "reported",
     "raw": "3.32",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-266_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-266_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.9942,
     "max": 70.9942,
     "quality": "reported",
     "raw": "532.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.69,
     "max": 3.69,
     "quality": "reported",
     "raw": "3.69",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-11-22",
     "quality": "reported",
     "raw": "11/22/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/261",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H13H201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 261,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 24.85,
     "max": 24.85,
     "quality": "reported",
     "raw": "298.00",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-267_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.00",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-267_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 5.4,
     "max": 5.4,
     "quality": "reported",
     "raw": "5.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.67,
     "max": 0.67,
     "quality": "reported",
     "raw": "0.67",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.20/0.45/0.35 O2/N2/He, 0.70 atm ambient environment. The droplet remains in the HiBMS FOV (and the FOV of all the cameras) for the entire test. The flame grows throughout the test and gets dimmer until radiatively extinguishing after approximately 5 seconds. There appears to be no evidence of cool flame formation (no rapid vaporization after visible flame extinction and no vapor cloud formed in the color camera view).",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.20/0.45/0.35 O2/N2/He, 0.70 atm ambient environment. The droplet remains in the HiBMS FOV (and the FOV of all the cameras) for the entire test. The flame grows throughout the test and gets dimmer until radiatively extinguishing after approximately 5 seconds. There appears to be no evidence of cool flame formation (no rapid vaporization after visible flame extinction and no vapor cloud formed in the color camera view).",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-267_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.20/0.45/0.35 O2/N2/He, 0.70 atm ambient environment. The droplet remains in the HiBMS FOV (and the FOV of all the cameras) for the entire test. The flame grows throughout the test and gets dimmer until radiatively extinguishing after approximately 5 seconds. There appears to be no evidence of cool flame formation (no rapid vaporization after visible flame extinction and no vapor cloud formed in the color camera view).",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-267_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.69,
     "max": 1.69,
     "quality": "reported",
     "raw": "1.69",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-267_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-267_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.9275,
     "max": 70.9275,
     "quality": "reported",
     "raw": "532",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.08,
     "max": 3.08,
     "quality": "reported",
     "raw": "3.08",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-11-22",
     "quality": "reported",
     "raw": "11/22/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/262",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H13M102",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 262,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 24.29,
     "max": 24.29,
     "quality": "reported",
     "raw": "297.44",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-268_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 297.44",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-268_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 17.4,
     "max": 17.4,
     "quality": "reported",
     "raw": "17.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.6,
     "max": 0.6,
     "quality": "reported",
     "raw": "0.6",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.20/0.45/0.35 O2/N2/He, 0.70 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition, but remains within the FOV for the entire test. A very dim flame barely detectable in the Color Camera. Very long burn resulting in diffusive extinction, although the flame standoff grows throughout the test.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.20/0.45/0.35 O2/N2/He, 0.70 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition, but remains within the FOV for the entire test. A very dim flame barely detectable in the Color Camera. Very long burn resulting in diffusive extinction, although the flame standoff grows throughout the test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-268_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.20/0.45/0.35 O2/N2/He, 0.70 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition, but remains within the FOV for the entire test. A very dim flame barely detectable in the Color Camera. Very long burn resulting in diffusive extinction, although the flame standoff grows throughout the test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-268_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.24,
     "max": 2.24,
     "quality": "reported",
     "raw": "2.24",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-268_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-268_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.3409,
     "max": 70.3409,
     "quality": "reported",
     "raw": "527.6",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.87,
     "max": 3.87,
     "quality": "reported",
     "raw": "3.87",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-11-28",
     "quality": "reported",
     "raw": "11/28/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/263",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H13M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 263,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 24.64,
     "max": 24.64,
     "quality": "reported",
     "raw": "297.79",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-269_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 297.79",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-269_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 10.6,
     "max": 10.6,
     "quality": "reported",
     "raw": "10.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.63,
     "max": 0.63,
     "quality": "reported",
     "raw": "0.63",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.20/0.45/0.35 O2/N2/He, 0.70 atm ambient environment. The droplet is nearly motionless after deployment and ignition, drifts around the HiBMS FOV, but remains in the FOV for the entire burn and well after visible flame extinction.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.20/0.45/0.35 O2/N2/He, 0.70 atm ambient environment. The droplet is nearly motionless after deployment and ignition, drifts around the HiBMS FOV, but remains in the FOV for the entire burn and well after visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-269_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.20/0.45/0.35 O2/N2/He, 0.70 atm ambient environment. The droplet is nearly motionless after deployment and ignition, drifts around the HiBMS FOV, but remains in the FOV for the entire burn and well after visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-269_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.5,
     "max": 1.5,
     "quality": "reported",
     "raw": "1.5",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-269_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-269_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.35,
     "max": 0.35,
     "quality": "reported",
     "raw": "0.35",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.2,
     "max": 0.2,
     "quality": "reported",
     "raw": "0.2",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.3809,
     "max": 70.3809,
     "quality": "reported",
     "raw": "527.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.95,
     "max": 2.95,
     "quality": "reported",
     "raw": "2.95",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-11-28",
     "quality": "reported",
     "raw": "11/28/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/264",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H14M101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 264,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.25,
     "max": 26.25,
     "quality": "reported",
     "raw": "299.40",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-270_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.40",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-270_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 7.8,
     "max": 7.8,
     "quality": "reported",
     "raw": "7.8",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.59,
     "max": 0.59,
     "quality": "reported",
     "raw": "0.59",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.18/0.42/0.40 O2/N2/He, 0.70 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition, leaving the FOV when the visible flame extinguishes. This was a large droplet and likely radiative extinction.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.18/0.42/0.40 O2/N2/He, 0.70 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition, leaving the FOV when the visible flame extinguishes. This was a large droplet and likely radiative extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-270_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.18/0.42/0.40 O2/N2/He, 0.70 atm ambient environment. The droplet drifts S in the HiBMS FOV after deployment and ignition, leaving the FOV when the visible flame extinguishes. This was a large droplet and likely radiative extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-270_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.67,
     "max": 2.67,
     "quality": "reported",
     "raw": "2.67",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-270_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-270_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.42,
     "max": 0.42,
     "quality": "reported",
     "raw": "0.42",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.9808,
     "max": 70.9808,
     "quality": "reported",
     "raw": "532.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.5,
     "max": 3.5,
     "quality": "reported",
     "raw": "3.5",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-11-28",
     "quality": "reported",
     "raw": "11/28/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/265",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H14M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 265,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.41,
     "max": 26.41,
     "quality": "reported",
     "raw": "299.56",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-271_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.56",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-271_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 5.9,
     "max": 5.9,
     "quality": "reported",
     "raw": "5.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.63,
     "max": 0.63,
     "quality": "reported",
     "raw": "0.63",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.18/0.42/0.40 O2/N2/He, 0.70 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment, then hits the igniter and drifts E and out of the FOV before extinction. The extinction droplet diameter is extrapolated from the droplet history from the point the droplet leaves the HiBMS FOV until the time of visible flame extinction using the measured burning rate constant during the later period while the droplet is in the HiBMS FOV.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.18/0.42/0.40 O2/N2/He, 0.70 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment, then hits the igniter and drifts E and out of the FOV before extinction. The extinction droplet diameter is extrapolated from the droplet history from the point the droplet leaves the HiBMS FOV until the time of visible flame extinction using the measured burning rate constant during the later period while the droplet is in the HiBMS FOV.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-271_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.18/0.42/0.40 O2/N2/He, 0.70 atm ambient environment. The droplet drifts N in the HiBMS FOV after deployment, then hits the igniter and drifts E and out of the FOV before extinction. The extinction droplet diameter is extrapolated from the droplet history from the point the droplet leaves the HiBMS FOV until the time of visible flame extinction using the measured burning rate constant during the later period while the droplet is in the HiBMS FOV.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-271_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.92,
     "max": 1.92,
     "quality": "reported",
     "raw": "1.92",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-271_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-271_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.42,
     "max": 0.42,
     "quality": "reported",
     "raw": "0.42",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.0475,
     "max": 71.0475,
     "quality": "reported",
     "raw": "532.9",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.7,
     "max": 2.7,
     "quality": "reported",
     "raw": "2.7",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-11-28",
     "quality": "reported",
     "raw": "11/28/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/266",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H14M202",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 266,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.62,
     "max": 26.62,
     "quality": "reported",
     "raw": "299.77",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-272_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.77",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-272_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 2.3,
     "max": 2.3,
     "quality": "reported",
     "raw": "2.3",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.62,
     "max": 0.62,
     "quality": "reported",
     "raw": "0.62",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet burning in a 0.18/0.42/0.40 O2/N2/He, 0.70 atm ambient environment. There is almost no axial motion of the droplet relative to the fiber, but the droplet does oscillate radially on the fiber which causes minor disruptions in the flame and creates some scatter in the droplet history.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet burning in a 0.18/0.42/0.40 O2/N2/He, 0.70 atm ambient environment. There is almost no axial motion of the droplet relative to the fiber, but the droplet does oscillate radially on the fiber which causes minor disruptions in the flame and creates some scatter in the droplet history.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-272_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet burning in a 0.18/0.42/0.40 O2/N2/He, 0.70 atm ambient environment. There is almost no axial motion of the droplet relative to the fiber, but the droplet does oscillate radially on the fiber which causes minor disruptions in the flame and creates some scatter in the droplet history.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-272_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.3,
     "max": 1.3,
     "quality": "reported",
     "raw": "1.3",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-272_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-272_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.42,
     "max": 0.42,
     "quality": "reported",
     "raw": "0.42",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 71.0875,
     "max": 71.0875,
     "quality": "reported",
     "raw": "533.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.84,
     "max": 1.84,
     "quality": "reported",
     "raw": "1.84",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-11-28",
     "quality": "reported",
     "raw": "11/28/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/267",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H14H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 267,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 23.91,
     "max": 23.91,
     "quality": "reported",
     "raw": "297.06",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-273_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 297.06",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-273_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 3.5,
     "max": 3.5,
     "quality": "reported",
     "raw": "3.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.71,
     "max": 0.71,
     "quality": "reported",
     "raw": "0.71",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.18/0.42/0.40 O2/N2/He, 0.70 atm ambient environment. The droplet drifts NE in the HiBMS FOV after deployment and ignition, but remains in the FOV of all cameras for the entire test. The droplet burns for several seconds, the flame grows, reaches a maximum size and remains nearly constant for the entire test. The luminosity of the flame continuously decreases as the droplet burns. This is likely near the flammability limit. There is no evidence of cool flame formation (no rapid vaporization or vapor cloud formation).",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.18/0.42/0.40 O2/N2/He, 0.70 atm ambient environment. The droplet drifts NE in the HiBMS FOV after deployment and ignition, but remains in the FOV of all cameras for the entire test. The droplet burns for several seconds, the flame grows, reaches a maximum size and remains nearly constant for the entire test. The luminosity of the flame continuously decreases as the droplet burns. This is likely near the flammability limit. There is no evidence of cool flame formation (no rapid vaporization or vapor cloud formation).",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-273_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.18/0.42/0.40 O2/N2/He, 0.70 atm ambient environment. The droplet drifts NE in the HiBMS FOV after deployment and ignition, but remains in the FOV of all cameras for the entire test. The droplet burns for several seconds, the flame grows, reaches a maximum size and remains nearly constant for the entire test. The luminosity of the flame continuously decreases as the droplet burns. This is likely near the flammability limit. There is no evidence of cool flame formation (no rapid vaporization or vapor cloud formation).",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-273_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.64,
     "max": 1.64,
     "quality": "reported",
     "raw": "1.64",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-273_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-273_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.42,
     "max": 0.42,
     "quality": "reported",
     "raw": "0.42",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.3942,
     "max": 70.3942,
     "quality": "reported",
     "raw": "528",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.27,
     "max": 2.27,
     "quality": "reported",
     "raw": "2.27",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-11-30",
     "quality": "reported",
     "raw": "11/30/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/268",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H14H201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 268,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.2,
     "max": 25.2,
     "quality": "reported",
     "raw": "298.35",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-274_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.35",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-274_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 3.5,
     "max": 3.5,
     "quality": "reported",
     "raw": "3.5",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.77,
     "max": 0.77,
     "quality": "reported",
     "raw": "0.77",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.18/0.42/0.40 O2/N2/He, 0.70 atm ambient environment. The droplet drifts NE after deployment and ignition, but remains in HiBMS FOV for duration of the burn and several seconds after flame extinction (long enough to observe the vaporization history). The flame grows slightly reaches a maximum size 1/3rd of the way through the burn and then decreases in size in response to the shrinking droplet. This is likely diffusive extinction, but very close to the flammability limit. There is no evidence of a cool flame (rapid vaporization after visible flame extinction and no vapor cloud formation).",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.18/0.42/0.40 O2/N2/He, 0.70 atm ambient environment. The droplet drifts NE after deployment and ignition, but remains in HiBMS FOV for duration of the burn and several seconds after flame extinction (long enough to observe the vaporization history). The flame grows slightly reaches a maximum size 1/3rd of the way through the burn and then decreases in size in response to the shrinking droplet. This is likely diffusive extinction, but very close to the flammability limit. There is no evidence of a cool flame (rapid vaporization after visible flame extinction and no vapor cloud formation).",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-274_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.18/0.42/0.40 O2/N2/He, 0.70 atm ambient environment. The droplet drifts NE after deployment and ignition, but remains in HiBMS FOV for duration of the burn and several seconds after flame extinction (long enough to observe the vaporization history). The flame grows slightly reaches a maximum size 1/3rd of the way through the burn and then decreases in size in response to the shrinking droplet. This is likely diffusive extinction, but very close to the flammability limit. There is no evidence of a cool flame (rapid vaporization after visible flame extinction and no vapor cloud formation).",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-274_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.84,
     "max": 0.84,
     "quality": "reported",
     "raw": "0.84",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-274_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-274_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.4,
     "max": 0.4,
     "quality": "reported",
     "raw": "0.4",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.42,
     "max": 0.42,
     "quality": "reported",
     "raw": "0.42",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.18,
     "max": 0.18,
     "quality": "reported",
     "raw": "0.18",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.7009,
     "max": 70.7009,
     "quality": "reported",
     "raw": "530.3",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.86,
     "max": 1.86,
     "quality": "reported",
     "raw": "1.86",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-11-30",
     "quality": "reported",
     "raw": "11/30/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/269",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H15H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 269,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.5,
     "max": 26.5,
     "quality": "reported",
     "raw": "299.65",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-275_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.65",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-275_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 1.9,
     "max": 1.9,
     "quality": "reported",
     "raw": "1.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.76,
     "max": 0.76,
     "quality": "reported",
     "raw": "0.76",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.17/0.38/0.45 O2/N2/He, 0.70 atm ambient environment. The droplet drifts NE in the HiBMS FOV, but stays in the FOV for the entire test. Well after flame extinction, the droplet drifts partially out of the HiBMS FOV and then back in for the remainder of the recording time. The flame grows continuously throughout the test getting dimmer until the flame extinguishes. There is no evidence of a cool flame (continued vaporization or vapor cloud).",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.17/0.38/0.45 O2/N2/He, 0.70 atm ambient environment. The droplet drifts NE in the HiBMS FOV, but stays in the FOV for the entire test. Well after flame extinction, the droplet drifts partially out of the HiBMS FOV and then back in for the remainder of the recording time. The flame grows continuously throughout the test getting dimmer until the flame extinguishes. There is no evidence of a cool flame (continued vaporization or vapor cloud).",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-275_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.17/0.38/0.45 O2/N2/He, 0.70 atm ambient environment. The droplet drifts NE in the HiBMS FOV, but stays in the FOV for the entire test. Well after flame extinction, the droplet drifts partially out of the HiBMS FOV and then back in for the remainder of the recording time. The flame grows continuously throughout the test getting dimmer until the flame extinguishes. There is no evidence of a cool flame (continued vaporization or vapor cloud).",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-275_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 1.86,
     "max": 1.86,
     "quality": "reported",
     "raw": "1.86",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-275_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-275_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.38,
     "max": 0.38,
     "quality": "reported",
     "raw": "0.38",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.9542,
     "max": 70.9542,
     "quality": "reported",
     "raw": "532.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.22,
     "max": 2.22,
     "quality": "reported",
     "raw": "2.22",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-11-30",
     "quality": "reported",
     "raw": "11/30/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/270",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H15H201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 270,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.74,
     "max": 26.74,
     "quality": "reported",
     "raw": "299.89",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-276_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.89",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-276_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 1.4,
     "max": 1.4,
     "quality": "reported",
     "raw": "1.4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 1.06,
     "max": 1.06,
     "quality": "reported",
     "raw": "1.06",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported heptane droplet burning in a 0.17/0.38/0.45 O2/N2/He, 0.70 atm ambient environment. The droplet exhibits significant axial and radial oscillations throughout the test. The burning rate and extinction diameter data are strongly influenced by this motion. The residual droplet on the fiber has a large gas bubble that results in the size jump after visible flame extinction.",
     "quality": "reported",
     "raw": "Fiber-supported heptane droplet burning in a 0.17/0.38/0.45 O2/N2/He, 0.70 atm ambient environment. The droplet exhibits significant axial and radial oscillations throughout the test. The burning rate and extinction diameter data are strongly influenced by this motion. The residual droplet on the fiber has a large gas bubble that results in the size jump after visible flame extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-276_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported heptane droplet burning in a 0.17/0.38/0.45 O2/N2/He, 0.70 atm ambient environment. The droplet exhibits significant axial and radial oscillations throughout the test. The burning rate and extinction diameter data are strongly influenced by this motion. The residual droplet on the fiber has a large gas bubble that results in the size jump after visible flame extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-276_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "burned to completion",
     "quality": "reported",
     "raw": "Completion",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.91,
     "max": 0.91,
     "quality": "reported",
     "raw": "0.91",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-276_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-276_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.38,
     "max": 0.38,
     "quality": "reported",
     "raw": "0.38",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.9942,
     "max": 70.9942,
     "quality": "reported",
     "raw": "532.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 1.61,
     "max": 1.61,
     "quality": "reported",
     "raw": "1.61",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-11-30",
     "quality": "reported",
     "raw": "11/30/11",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/271",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H15M102",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 271,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 25.37,
     "max": 25.37,
     "quality": "reported",
     "raw": "298.52",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-277_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 298.52",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-277_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 4,
     "max": 4,
     "quality": "reported",
     "raw": "4",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.63,
     "max": 0.63,
     "quality": "reported",
     "raw": "0.63",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating methanol droplet burning in a 0.17/0.38/0.45 O2/N2/He, 0.70 atm ambient environment. The droplet drifts S in HiBMS FOV after deployment and ignition and out of FOV, but well after extinction.",
     "quality": "reported",
     "raw": "Free-floating methanol droplet burning in a 0.17/0.38/0.45 O2/N2/He, 0.70 atm ambient environment. The droplet drifts S in HiBMS FOV after deployment and ignition and out of FOV, but well after extinction.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-277_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating methanol droplet burning in a 0.17/0.38/0.45 O2/N2/He, 0.70 atm ambient environment. The droplet drifts S in HiBMS FOV after deployment and ignition and out of FOV, but well after extinction.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-277_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.3,
     "max": 2.3,
     "quality": "reported",
     "raw": "2.3",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-277_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-277_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.38,
     "max": 0.38,
     "quality": "reported",
     "raw": "0.38",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.7142,
     "max": 70.7142,
     "quality": "reported",
     "raw": "530.4",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.79,
     "max": 2.79,
     "quality": "reported",
     "raw": "2.79",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-12-05",
     "quality": "reported",
     "raw": "12/5/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/272",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H15M201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 272,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.01,
     "max": 26.01,
     "quality": "reported",
     "raw": "299.16",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-278_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.16",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-278_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 2.9,
     "max": 2.9,
     "quality": "reported",
     "raw": "2.9",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.66,
     "max": 0.66,
     "quality": "reported",
     "raw": "0.66",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Fiber-supported methanol droplet burning in a 0.17/0.38/0.45 O2/N2/He, 0.70 atm ambient environment. The droplet migrates slowly W in the HiBMS FOV after ignition but remains in the FOV the entire test. There is a small spot on fiber that burns off early in burn. A short burn to extinction. This is near the LOI in this ambient mixture.",
     "quality": "reported",
     "raw": "Fiber-supported methanol droplet burning in a 0.17/0.38/0.45 O2/N2/He, 0.70 atm ambient environment. The droplet migrates slowly W in the HiBMS FOV after ignition but remains in the FOV the entire test. There is a small spot on fiber that burns off early in burn. A short burn to extinction. This is near the LOI in this ambient mixture.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-278_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Fiber-supported methanol droplet burning in a 0.17/0.38/0.45 O2/N2/He, 0.70 atm ambient environment. The droplet migrates slowly W in the HiBMS FOV after ignition but remains in the FOV the entire test. There is a small spot on fiber that burns off early in burn. A short burn to extinction. This is near the LOI in this ambient mixture.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-278_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.31,
     "max": 2.31,
     "quality": "reported",
     "raw": "2.31",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": true,
     "quality": "reported",
     "raw": "Yes",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-278_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: Yes",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-278_TestSheet.txt"
    },
    "fuel": {
     "text": "methanol",
     "quality": "reported",
     "raw": "Methanol",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.45,
     "max": 0.45,
     "quality": "reported",
     "raw": "0.45",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.38,
     "max": 0.38,
     "quality": "reported",
     "raw": "0.38",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.17,
     "max": 0.17,
     "quality": "reported",
     "raw": "0.17",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 70.8609,
     "max": 70.8609,
     "quality": "reported",
     "raw": "531.5",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.68,
     "max": 2.68,
     "quality": "reported",
     "raw": "2.68",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-12-05",
     "quality": "reported",
     "raw": "12/5/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/273",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H19H101",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 273,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.24,
     "max": 26.24,
     "quality": "reported",
     "raw": "299.39",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-279_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 299.39",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-279_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 7.6,
     "max": 7.6,
     "quality": "reported",
     "raw": "7.6",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.55,
     "max": 0.55,
     "quality": "reported",
     "raw": "0.55",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.21/0.79 O2/N2, 1.0 atm (nominally air) ambient environment. The droplet stays in HiBMS FOV (it briefly drifts out well after visible flame extinction) for the entire test. This test likely had a cool flame following visible flame extinction. There was a large vapor cloud formed at the end of the test.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.21/0.79 O2/N2, 1.0 atm (nominally air) ambient environment. The droplet stays in HiBMS FOV (it briefly drifts out well after visible flame extinction) for the entire test. This test likely had a cool flame following visible flame extinction. There was a large vapor cloud formed at the end of the test.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-279_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.21/0.79 O2/N2, 1.0 atm (nominally air) ambient environment. The droplet stays in HiBMS FOV (it briefly drifts out well after visible flame extinction) for the entire test. This test likely had a cool flame following visible flame extinction. There was a large vapor cloud formed at the end of the test.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-279_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 2.91,
     "max": 2.91,
     "quality": "reported",
     "raw": "2.91",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-279_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-279_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.64,
     "max": 0.64,
     "quality": "reported",
     "raw": "0.64",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 101.952,
     "max": 101.952,
     "quality": "reported",
     "raw": "764.7",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 3.54,
     "max": 3.54,
     "quality": "reported",
     "raw": "3.54",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-12-08",
     "quality": "reported",
     "raw": "12/8/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-69/flex/274",
   "accession": "PSI-69",
   "investigation": "FLEX",
   "type": "test",
   "label": "H19H201",
   "source_table": "PSI-69_Experimental table_FLEX.csv",
   "source_row": 274,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-69",
   "values": {
    "ambient_temperature_c": {
     "min": 26.92,
     "max": 26.92,
     "quality": "reported",
     "raw": "300.07",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-280_TestSheet.txt, p. 1. NASA's test sheet gives the ambient temperature in K; minus 273.15 gives °C.",
     "evidence": "Temperature (K) = 300.07",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-280_TestSheet.txt"
    },
    "burn_time_s": {
     "min": 11.7,
     "max": 11.7,
     "quality": "reported",
     "raw": "11.7",
     "column": "Burn time; s"
    },
    "burning_rate_mm2_s": {
     "min": 0.65,
     "max": 0.65,
     "quality": "reported",
     "raw": "0.65",
     "column": "Burning rate; mm"
    },
    "co2_fraction": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "0",
     "column": "CO initial ambient composition; mole fraction"
    },
    "description": {
     "text": "Free-floating heptane droplet burning in a 0.21/0.15/0.64 O2/N2/He, 1.0 atm ambient environment. The droplet drifts E in the HiBMS FOV after deployment and ignition and out of the FOV right before diffusive extinction. The extinction droplet diameter comes from extrapolating the droplet history from the time it leaves the FOV until visible flame extinction using the measured burning rate constant from the last part of the burn.",
     "quality": "reported",
     "raw": "Free-floating heptane droplet burning in a 0.21/0.15/0.64 O2/N2/He, 1.0 atm ambient environment. The droplet drifts E in the HiBMS FOV after deployment and ignition and out of the FOV right before diffusive extinction. The extinction droplet diameter comes from extrapolating the droplet history from the time it leaves the FOV until visible flame extinction using the measured burning rate constant from the last part of the burn.",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-280_TestSheet.txt, p. 1. NASA's own description of the burn, from the COMMENTS paragraph of its test sheet, word for word.",
     "evidence": "Free-floating heptane droplet burning in a 0.21/0.15/0.64 O2/N2/He, 1.0 atm ambient environment. The droplet drifts E in the HiBMS FOV after deployment and ignition and out of the FOV right before diffusive extinction. The extinction droplet diameter comes from extrapolating the droplet history from the time it leaves the FOV until visible flame extinction using the measured burning rate constant from the last part of the burn.",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-280_TestSheet.txt"
    },
    "diluent": {
     "text": "N2 + He",
     "quality": "derived",
     "note": "From the non-zero gas fractions of this test."
    },
    "end_mode": {
     "text": "extinction",
     "quality": "reported",
     "raw": "Extinction",
     "column": "Test end"
    },
    "extinction_diameter_mm": {
     "min": 0.73,
     "max": 0.73,
     "quality": "reported",
     "raw": "0.73",
     "column": "Visible flame extinction diameter; mm"
    },
    "fiber_supported": {
     "bool": false,
     "quality": "reported",
     "raw": "No",
     "column": "p. 1",
     "note": "From NASA's file PSI-69_Raw Data_FLEX-280_TestSheet.txt, p. 1. NASA's test sheet: whether the droplet was held on a support fiber.",
     "evidence": "Fiber: No",
     "evidence_source": "file:PSI-69_Raw Data_FLEX-280_TestSheet.txt"
    },
    "fuel": {
     "text": "n-heptane",
     "quality": "reported",
     "raw": "Heptane",
     "column": "Fuel"
    },
    "fuel_phase": {
     "text": "liquid",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "droplet",
     "quality": "context",
     "evidence": "igniting and observing the burning behavior of relatively large droplets",
     "evidence_source": "psi"
    },
    "he_fraction": {
     "min": 0.15,
     "max": 0.15,
     "quality": "reported",
     "raw": "0.15",
     "column": "He initial ambient composition; mole fraction"
    },
    "n2_fraction": {
     "min": 0.64,
     "max": 0.64,
     "quality": "reported",
     "raw": "0.64",
     "column": "N initial ambient composition; mole fraction"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "initial ambient composition",
     "evidence_source": "table"
    },
    "o2_fraction": {
     "min": 0.21,
     "max": 0.21,
     "quality": "reported",
     "raw": "0.21",
     "column": "O initial ambient composition; mole fraction"
    },
    "pressure_kpa": {
     "min": 102.152,
     "max": 102.152,
     "quality": "reported",
     "raw": "766.2",
     "column": "Ambient pressure; mmHg"
    },
    "size_mm": {
     "min": 2.82,
     "max": 2.82,
     "quality": "reported",
     "raw": "2.82",
     "column": "Droplet initial diameter; mm"
    },
    "test_date": {
     "text": "2011-12-08",
     "quality": "reported",
     "raw": "12/8/2011",
     "column": "Test Date"
    }
   }
  },
  {
   "id": "PSI-98/saffire1/1",
   "accession": "PSI-98",
   "investigation": "Saffire-I",
   "type": "test",
   "label": "Sample S1",
   "source_table": "PSI-98_Experimental table_SAFFIRE-1.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-98",
   "values": {
    "burn_length_cm": {
     "min": 84,
     "max": 84,
     "quality": "reported",
     "raw": "~ 84 cm",
     "column": "p. 29, Table I (continued), row 1-1, column µ-g Burn Length",
     "note": "From NASA's file NTRS-20170008805.pdf, p. 29, Table I (continued), row 1-1, column µ-g Burn Length. NASA's column \"µ-g Burn Length\" of Table I. NASA writes \"~\" (about). NASA's file NTRS-20180005168.pdf gives the same.",
     "evidence": "1-1 182 W 8 s 420 s ~ 84 cm 1.8 mm/s Complete Acceleratory",
     "evidence_source": "file:NTRS-20170008805.pdf"
    },
    "burn_time_s": {
     "min": 420,
     "max": 420,
     "quality": "reported",
     "raw": "420",
     "column": "Burn Time (s)"
    },
    "end_mode": {
     "text": "flow terminated",
     "quality": "context",
     "raw": "the air flow was shut off and the flame immediately extinguished",
     "column": "p. 16",
     "note": "From NASA's file NTRS-20170008805.pdf, p. 16. Said of the 40.6-cm-wide concurrent-flow test (Saffire-I sample 1). NASA says the flame went out when the air flow was shut off at the end of the allotted time.",
     "evidence": "The flame burned the entire allotted test time of about 7 min. at which point the air flow was shut off and the flame immediately extinguished",
     "evidence_source": "file:NTRS-20170008805.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "Flow Direction"
    },
    "flow_speed_cm_s": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "20",
     "column": "Air Flow (cm/s)"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "SIBAL Fabric",
     "column": "Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "composite fabric called Sibal consisting of cotton on a fiberglass substrate",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "SIBAL Fabric",
     "column": "Material"
    },
    "ignited": {
     "bool": true,
     "quality": "context",
     "raw": "flame ignited across the bottom of the fuel",
     "column": "p. 16",
     "note": "From NASA's file NTRS-20170008805.pdf, p. 16. The 40.6-cm-wide concurrent-flow test is Saffire-I sample 1 (Table I, p. 29).",
     "evidence": "40.6-cm-wide concurrent-flow test: flame ignited across the bottom of the fuel",
     "evidence_source": "file:NTRS-20170008805.pdf"
    },
    "igniter_power_w": {
     "min": 182,
     "max": 182,
     "quality": "reported",
     "raw": "182",
     "column": "Ignition Power (W)"
    },
    "ignition_time_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "Ignition Time (s)"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Air is drawn through the flow duct by fans",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.215,
     "max": 0.217,
     "quality": "reported",
     "raw": "21.5 - 21.7",
     "column": "Percent O2"
    },
    "pressure_kpa": {
     "min": 102.31434,
     "max": 102.31434,
     "quality": "reported",
     "raw": "14.83944003262111",
     "column": "Calibrated Data!J3",
     "note": "From NASA's file PSI-98_Raw Data_Saffire-I Sample 1 Sensor Data Complete TM graphs.xlsx, Calibrated Data!J3. The first reading of NASA's Ambient Pressure (PSIA) in this sample's sensor record, 60 s before the igniter current first passed 0.5 A; multiplied by 6.894757293168 to give kPa. A reading at the start of the record, not an average over the burn; the pressure curve in series.csv shows the whole record. It replaces a value that had been assumed."
    },
    "sample_length_cm": {
     "min": 40.6,
     "max": 40.6,
     "quality": "reported",
     "raw": "40.6",
     "column": "Sample Length (cm)"
    },
    "sample_thickness_mm": {
     "min": 3.7,
     "max": 3.7,
     "quality": "reported",
     "raw": "0.37",
     "column": "Sample Thickness (cm)"
    },
    "sample_width_cm": {
     "min": 94,
     "max": 94,
     "quality": "reported",
     "raw": "94",
     "column": "Sample Width (cm)"
    },
    "spread_rate_mm_s": {
     "min": 1.8,
     "max": 1.8,
     "quality": "reported",
     "raw": "1.8 mm/s",
     "column": "p. 29, Table I (continued), row 1-1, column µ-g Spread Rate",
     "note": "From NASA's file NTRS-20170008805.pdf, p. 29, Table I (continued), row 1-1, column µ-g Spread Rate. NASA's column \"µ-g Spread Rate\" of Table I. NASA's file NTRS-20180005168.pdf gives the same.",
     "evidence": "1-1 182 W 8 s 420 s ~ 84 cm 1.8 mm/s Complete Acceleratory",
     "evidence_source": "file:NTRS-20170008805.pdf"
    }
   }
  },
  {
   "id": "PSI-98/saffire1/2",
   "accession": "PSI-98",
   "investigation": "Saffire-I",
   "type": "test",
   "label": "Sample S2",
   "source_table": "PSI-98_Experimental table_SAFFIRE-1.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-98",
   "values": {
    "burn_length_1g_cm": {
     "min": 0,
     "max": 0,
     "quality": "reported",
     "raw": "~ 0",
     "column": "p. 29, Table I (continued), row 1-2, column 1-g Burn Length",
     "note": "From NASA's file NTRS-20170008805.pdf, p. 29, Table I (continued), row 1-2, column 1-g Burn Length. NASA's column \"1-g Burn Length\" of Table I. NASA writes \"~\" (about). NASA's file NTRS-20180005168.pdf gives the same.",
     "evidence": "1-2 182 W 8 s 70 s ~ 10 cm 1.3 mm/s ~ 0 n/a",
     "evidence_source": "file:NTRS-20170008805.pdf"
    },
    "burn_length_cm": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "~ 10 cm",
     "column": "p. 29, Table I (continued), row 1-2, column µ-g Burn Length",
     "note": "From NASA's file NTRS-20170008805.pdf, p. 29, Table I (continued), row 1-2, column µ-g Burn Length. NASA's column \"µ-g Burn Length\" of Table I. NASA writes \"~\" (about). NASA's file NTRS-20180005168.pdf gives the same.",
     "evidence": "1-2 182 W 8 s 70 s ~ 10 cm 1.3 mm/s ~ 0 n/a",
     "evidence_source": "file:NTRS-20170008805.pdf"
    },
    "burn_time_s": {
     "min": 70,
     "max": 70,
     "quality": "reported",
     "raw": "70",
     "column": "Burn Time (s)"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "Flow Direction"
    },
    "flow_speed_cm_s": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "20",
     "column": "Air Flow (cm/s)"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "SIBAL Fabric",
     "column": "Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "composite fabric called Sibal consisting of cotton on a fiberglass substrate",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "SIBAL Fabric",
     "column": "Material"
    },
    "ignited": {
     "bool": true,
     "quality": "context",
     "raw": "flame ignited across the top of the fuel",
     "column": "p. 16",
     "note": "From NASA's file NTRS-20170008805.pdf, p. 16. The 40.6-cm-wide opposed-flow test is Saffire-I sample 2 (Table I, p. 29).",
     "evidence": "40.6-cm-wide opposed-flow test: flame ignited across the top of the fuel",
     "evidence_source": "file:NTRS-20170008805.pdf"
    },
    "igniter_power_w": {
     "min": 182,
     "max": 182,
     "quality": "reported",
     "raw": "182",
     "column": "Ignition Power (W)"
    },
    "ignition_time_s": {
     "min": 8,
     "max": 8,
     "quality": "reported",
     "raw": "8",
     "column": "Ignition Time (s)"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Air is drawn through the flow duct by fans",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.215,
     "max": 0.215,
     "approx": true,
     "quality": "reported",
     "raw": "~ 21.5",
     "column": "Percent O2"
    },
    "pressure_kpa": {
     "min": 102.58972,
     "max": 102.58972,
     "quality": "reported",
     "raw": "14.87938044009127",
     "column": "Calibrated Data!J3",
     "note": "From NASA's file PSI-98_Raw Data_Saffire-I Sample 2 Sensor Data Complete TM graphs.xlsx, Calibrated Data!J3. The first reading of NASA's Ambient Pressure (PSIA) in this sample's sensor record, 60 s before the igniter current first passed 0.5 A; multiplied by 6.894757293168 to give kPa. A reading at the start of the record, not an average over the burn; the pressure curve in series.csv shows the whole record. It replaces a value that had been assumed."
    },
    "sample_length_cm": {
     "min": 40.6,
     "max": 40.6,
     "quality": "reported",
     "raw": "40.6",
     "column": "Sample Length (cm)"
    },
    "sample_thickness_mm": {
     "min": 3.7,
     "max": 3.7,
     "quality": "reported",
     "raw": "0.37",
     "column": "Sample Thickness (cm)"
    },
    "sample_width_cm": {
     "min": 94,
     "max": 94,
     "quality": "reported",
     "raw": "94",
     "column": "Sample Width (cm)"
    },
    "spread_rate_mm_s": {
     "min": 1.3,
     "max": 1.3,
     "quality": "reported",
     "raw": "1.3 mm/s",
     "column": "p. 29, Table I (continued), row 1-2, column µ-g Spread Rate",
     "note": "From NASA's file NTRS-20170008805.pdf, p. 29, Table I (continued), row 1-2, column µ-g Spread Rate. NASA's column \"µ-g Spread Rate\" of Table I. NASA's file NTRS-20180005168.pdf gives the same.",
     "evidence": "1-2 182 W 8 s 70 s ~ 10 cm 1.3 mm/s ~ 0 n/a",
     "evidence_source": "file:NTRS-20170008805.pdf"
    }
   }
  },
  {
   "id": "PSI-99/saffire2/1",
   "accession": "PSI-99",
   "investigation": "Saffire-II",
   "type": "test",
   "label": "Sample 2-1",
   "source_table": "PSI-99_Experimental table_SAFFIRE-2.csv",
   "source_row": 1,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-99",
   "values": {
    "burn_length_1g_cm": {
     "text": "Complete",
     "quality": "reported",
     "raw": "Complete",
     "column": "1-g Burn Length"
    },
    "burn_length_cm": {
     "min": 0,
     "max": 0,
     "approx": true,
     "quality": "reported",
     "raw": "~ 0",
     "column": "?-g Burn Length"
    },
    "burn_time_s": {
     "text": "Insignificant",
     "quality": "reported",
     "raw": "Insignificant",
     "column": "Burn Time (s)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "context",
     "raw": "did not spread and quickly extinguished",
     "column": "p. 12",
     "note": "From NASA's file NTRS-20170008805.pdf, p. 12. Said of the silicone samples, which are 2-1 to 2-4 (p. 9). NASA says the flame went out by itself once the igniter was off; it does not say whether a flame was established, so no 'ignited' claim is made.",
     "evidence": "Results were convincing although rather anticlimactic as none of the silicone samples burned. When the igniter was powered off, a tiny gas phase flame remained but did not spread and quickly extinguished.",
     "evidence_source": "file:NTRS-20170008805.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "Flow Direction"
    },
    "flow_speed_cm_s": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "20 cm/s",
     "column": "Air Flow (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "SIBAL, silicone, structure PMMA, flat PMMA, and PMMA with Nomex",
     "evidence_source": "psi"
    },
    "igniter_power_w": {
     "min": 80,
     "max": 80,
     "quality": "reported",
     "raw": "80 W",
     "column": "Ignition Power (W)"
    },
    "ignition_time_s": {
     "min": 9.2,
     "max": 9.2,
     "quality": "reported",
     "raw": "9.2 s",
     "column": "Ignition Time (s)"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Air is drawn through the flow duct by fans",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.215,
     "max": 0.215,
     "approx": true,
     "quality": "reported",
     "raw": "~ 21.5",
     "column": "Percent O2 (Note 1)"
    },
    "pressure_kpa": {
     "min": 102.43813,
     "max": 102.43813,
     "quality": "reported",
     "raw": "14.8573946857524",
     "column": "Calibrated Data!J3",
     "note": "From NASA's file PSI-99_Raw Data_Saffire Sensor Data Sample 1.xlsx, Calibrated Data!J3. The first reading of NASA's Ambient Pressure (PSIA) in this sample's sensor record, 60 s before the igniter current first passed 0.5 A; multiplied by 6.894757293168 to give kPa. A reading at the start of the record, not an average over the burn; the pressure curve in series.csv shows the whole record. It replaces a value that had been assumed."
    },
    "sample_length_cm": {
     "min": 29,
     "max": 29,
     "quality": "reported",
     "raw": "29 cm",
     "column": "Sample Length"
    },
    "sample_thickness_mm": {
     "min": 0.27,
     "max": 0.27,
     "quality": "reported",
     "raw": "0.27 mm",
     "column": "Samle Thickness"
    },
    "sample_width_cm": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5 cm",
     "column": "Sample Width (cm)"
    },
    "spread_rate_1g_mm_s": {
     "text": "Acceleratory",
     "quality": "reported",
     "raw": "Acceleratory",
     "column": "1-g Spread Rate"
    }
   }
  },
  {
   "id": "PSI-99/saffire2/2",
   "accession": "PSI-99",
   "investigation": "Saffire-II",
   "type": "test",
   "label": "Sample 2-2",
   "source_table": "PSI-99_Experimental table_SAFFIRE-2.csv",
   "source_row": 2,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-99",
   "values": {
    "burn_length_1g_cm": {
     "min": 7.6,
     "max": 7.6,
     "quality": "reported",
     "raw": "7.6 cm",
     "column": "1-g Burn Length"
    },
    "burn_length_cm": {
     "min": 0,
     "max": 0,
     "approx": true,
     "quality": "reported",
     "raw": "~ 0",
     "column": "?-g Burn Length"
    },
    "burn_time_s": {
     "text": "Insignificant",
     "quality": "reported",
     "raw": "Insignificant",
     "column": "Burn Time (s)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "context",
     "raw": "did not spread and quickly extinguished",
     "column": "p. 12",
     "note": "From NASA's file NTRS-20170008805.pdf, p. 12. Said of the silicone samples, which are 2-1 to 2-4 (p. 9). NASA says the flame went out by itself once the igniter was off; it does not say whether a flame was established, so no 'ignited' claim is made.",
     "evidence": "Results were convincing although rather anticlimactic as none of the silicone samples burned. When the igniter was powered off, a tiny gas phase flame remained but did not spread and quickly extinguished.",
     "evidence_source": "file:NTRS-20170008805.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "Flow Direction"
    },
    "flow_speed_cm_s": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "20 cm/s",
     "column": "Air Flow (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "SIBAL, silicone, structure PMMA, flat PMMA, and PMMA with Nomex",
     "evidence_source": "psi"
    },
    "igniter_power_w": {
     "min": 80,
     "max": 80,
     "quality": "reported",
     "raw": "80 W",
     "column": "Ignition Power (W)"
    },
    "ignition_time_s": {
     "min": 9.2,
     "max": 9.2,
     "quality": "reported",
     "raw": "9.2 s",
     "column": "Ignition Time (s)"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Air is drawn through the flow duct by fans",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.221,
     "max": 0.221,
     "approx": true,
     "quality": "reported",
     "raw": "~ 22.1",
     "column": "Percent O2 (Note 1)"
    },
    "pressure_kpa": {
     "min": 102.46354,
     "max": 102.46354,
     "quality": "reported",
     "raw": "14.861080706836596",
     "column": "Calibrated Data!J3",
     "note": "From NASA's file PSI-99_Raw Data_Saffire Sensor Data Sample 2.xlsx, Calibrated Data!J3. The first reading of NASA's Ambient Pressure (PSIA) in this sample's sensor record, 60 s before the igniter current first passed 0.5 A; multiplied by 6.894757293168 to give kPa. A reading at the start of the record, not an average over the burn; the pressure curve in series.csv shows the whole record. It replaces a value that had been assumed."
    },
    "sample_length_cm": {
     "min": 29,
     "max": 29,
     "quality": "reported",
     "raw": "29 cm",
     "column": "Sample Length"
    },
    "sample_thickness_mm": {
     "min": 0.61,
     "max": 0.61,
     "quality": "reported",
     "raw": "0.61 mm",
     "column": "Samle Thickness"
    },
    "sample_width_cm": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5 cm",
     "column": "Sample Width (cm)"
    },
    "spread_rate_1g_mm_s": {
     "min": 1.2,
     "max": 1.2,
     "quality": "reported",
     "raw": "1.2 mm/s",
     "column": "1-g Spread Rate"
    }
   }
  },
  {
   "id": "PSI-99/saffire2/3",
   "accession": "PSI-99",
   "investigation": "Saffire-II",
   "type": "test",
   "label": "Sample 2-3",
   "source_table": "PSI-99_Experimental table_SAFFIRE-2.csv",
   "source_row": 3,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-99",
   "values": {
    "burn_length_1g_cm": {
     "min": 0,
     "max": 0,
     "approx": true,
     "quality": "reported",
     "raw": "~ 0",
     "column": "1-g Burn Length"
    },
    "burn_length_cm": {
     "min": 0,
     "max": 0,
     "approx": true,
     "quality": "reported",
     "raw": "~ 0",
     "column": "?-g Burn Length"
    },
    "burn_time_s": {
     "text": "Insignificant",
     "quality": "reported",
     "raw": "Insignificant",
     "column": "Burn Time (s)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "context",
     "raw": "did not spread and quickly extinguished",
     "column": "p. 12",
     "note": "From NASA's file NTRS-20170008805.pdf, p. 12. Said of the silicone samples, which are 2-1 to 2-4 (p. 9). NASA says the flame went out by itself once the igniter was off; it does not say whether a flame was established, so no 'ignited' claim is made.",
     "evidence": "Results were convincing although rather anticlimactic as none of the silicone samples burned. When the igniter was powered off, a tiny gas phase flame remained but did not spread and quickly extinguished.",
     "evidence_source": "file:NTRS-20170008805.pdf"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "Flow Direction"
    },
    "flow_speed_cm_s": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "20 cm/s",
     "column": "Air Flow (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "SIBAL, silicone, structure PMMA, flat PMMA, and PMMA with Nomex",
     "evidence_source": "psi"
    },
    "igniter_power_w": {
     "min": 80,
     "max": 80,
     "quality": "reported",
     "raw": "80 W",
     "column": "Ignition Power (W)"
    },
    "ignition_time_s": {
     "min": 9.2,
     "max": 9.2,
     "quality": "reported",
     "raw": "9.2 s",
     "column": "Ignition Time (s)"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Air is drawn through the flow duct by fans",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.221,
     "max": 0.221,
     "approx": true,
     "quality": "reported",
     "raw": "~ 22.1",
     "column": "Percent O2 (Note 1)"
    },
    "pressure_kpa": {
     "min": 102.55934,
     "max": 102.55934,
     "quality": "reported",
     "raw": "14.874974170923199",
     "column": "Calibrated Data!J3",
     "note": "From NASA's file PSI-99_Raw Data_Saffire Sensor Data Sample 3.xlsx, Calibrated Data!J3. The first reading of NASA's Ambient Pressure (PSIA) in this sample's sensor record, 60 s before the igniter current first passed 0.5 A; multiplied by 6.894757293168 to give kPa. A reading at the start of the record, not an average over the burn; the pressure curve in series.csv shows the whole record. It replaces a value that had been assumed."
    },
    "sample_length_cm": {
     "min": 29,
     "max": 29,
     "quality": "reported",
     "raw": "29 cm",
     "column": "Sample Length"
    },
    "sample_thickness_mm": {
     "min": 1.03,
     "max": 1.03,
     "quality": "reported",
     "raw": "1.03 mm",
     "column": "Samle Thickness"
    },
    "sample_width_cm": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5 cm",
     "column": "Sample Width (cm)"
    }
   }
  },
  {
   "id": "PSI-99/saffire2/4",
   "accession": "PSI-99",
   "investigation": "Saffire-II",
   "type": "test",
   "label": "Sample 2-4",
   "source_table": "PSI-99_Experimental table_SAFFIRE-2.csv",
   "source_row": 4,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-99",
   "values": {
    "burn_length_1g_cm": {
     "text": "Complete",
     "quality": "reported",
     "raw": "Complete",
     "column": "1-g Burn Length"
    },
    "burn_length_cm": {
     "min": 0,
     "max": 0,
     "approx": true,
     "quality": "reported",
     "raw": "~ 0",
     "column": "?-g Burn Length"
    },
    "burn_time_s": {
     "text": "Insignificant",
     "quality": "reported",
     "raw": "Insignificant",
     "column": "Burn Time (s)"
    },
    "end_mode": {
     "text": "self-extinguished",
     "quality": "context",
     "raw": "did not spread and quickly extinguished",
     "column": "p. 12",
     "note": "From NASA's file NTRS-20170008805.pdf, p. 12. Said of the silicone samples, which are 2-1 to 2-4 (p. 9). NASA says the flame went out by itself once the igniter was off; it does not say whether a flame was established, so no 'ignited' claim is made.",
     "evidence": "Results were convincing although rather anticlimactic as none of the silicone samples burned. When the igniter was powered off, a tiny gas phase flame remained but did not spread and quickly extinguished.",
     "evidence_source": "file:NTRS-20170008805.pdf"
    },
    "flow_direction": {
     "text": "opposed",
     "quality": "reported",
     "raw": "Opposed",
     "column": "Flow Direction"
    },
    "flow_speed_cm_s": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "20 cm/s",
     "column": "Air Flow (cm/s)"
    },
    "fuel": {
     "text": "Silicone",
     "quality": "reported",
     "raw": "Silicone",
     "column": "Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "SIBAL, silicone, structure PMMA, flat PMMA, and PMMA with Nomex",
     "evidence_source": "psi"
    },
    "igniter_power_w": {
     "min": 80,
     "max": 80,
     "quality": "reported",
     "raw": "80 W",
     "column": "Ignition Power (W)"
    },
    "ignition_time_s": {
     "min": 9.2,
     "max": 9.2,
     "quality": "reported",
     "raw": "9.2 s",
     "column": "Ignition Time (s)"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Air is drawn through the flow duct by fans",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.221,
     "max": 0.221,
     "approx": true,
     "quality": "reported",
     "raw": "~ 22.1",
     "column": "Percent O2 (Note 1)"
    },
    "pressure_kpa": {
     "min": 102.5275,
     "max": 102.5275,
     "quality": "reported",
     "raw": "14.870356518136397",
     "column": "Calibrated Data!J3",
     "note": "From NASA's file PSI-99_Raw Data_Saffire Sensor Data Sample 4.xlsx, Calibrated Data!J3. The first reading of NASA's Ambient Pressure (PSIA) in this sample's sensor record, 60 s before the igniter current first passed 0.5 A; multiplied by 6.894757293168 to give kPa. A reading at the start of the record, not an average over the burn; the pressure curve in series.csv shows the whole record. It replaces a value that had been assumed."
    },
    "sample_length_cm": {
     "min": 29,
     "max": 29,
     "quality": "reported",
     "raw": "29 cm",
     "column": "Sample Length"
    },
    "sample_thickness_mm": {
     "min": 0.37,
     "max": 0.37,
     "quality": "corrected",
     "raw": "0.37 mm",
     "column": "Samle Thickness",
     "note": "The PSI table reads '037 mm'. Decimal point missing in the PSI table (the other samples are 0.27 to 1.03 mm)."
    },
    "sample_width_cm": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5 cm",
     "column": "Sample Width (cm)"
    },
    "spread_rate_1g_mm_s": {
     "min": 0.6,
     "max": 0.6,
     "quality": "reported",
     "raw": "0.6 mm/s",
     "column": "1-g Spread Rate"
    }
   }
  },
  {
   "id": "PSI-99/saffire2/5",
   "accession": "PSI-99",
   "investigation": "Saffire-II",
   "type": "test",
   "label": "Sample 2-5",
   "source_table": "PSI-99_Experimental table_SAFFIRE-2.csv",
   "source_row": 5,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-99",
   "values": {
    "burn_length_1g_cm": {
     "text": "Complete",
     "quality": "reported",
     "raw": "Complete",
     "column": "1-g Burn Length"
    },
    "burn_length_cm": {
     "min": 29,
     "max": 29,
     "quality": "reported",
     "raw": "29 cm",
     "column": "?-g Burn Length"
    },
    "burn_time_s": {
     "min": 145,
     "max": 145,
     "quality": "reported",
     "raw": "145 s",
     "column": "Burn Time (s)"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "Flow Direction"
    },
    "flow_speed_cm_s": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "20 cm/s",
     "column": "Air Flow (cm/s)"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "reported",
     "raw": "Cotton-Fiberglass (SIBAL)",
     "column": "Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "SIBAL, silicone, structure PMMA, flat PMMA, and PMMA with Nomex",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "Cotton-Fiberglass (SIBAL)",
     "column": "Material"
    },
    "ignited": {
     "bool": true,
     "quality": "context",
     "raw": "flame ignited across the bottom of the fuel",
     "column": "p. 16",
     "note": "From NASA's file NTRS-20170008805.pdf, p. 16. The 5-cm-wide fabric tests are Saffire-II samples 2-5 (20 cm/s) and 2-6 (25 cm/s) (Table I, p. 29).",
     "evidence": "5-cm-wide concurrent-flow tests: flame ignited across the bottom of the fuel ‒ Two flow speeds tested; 20 and 25 cm/s",
     "evidence_source": "file:NTRS-20170008805.pdf"
    },
    "igniter_power_w": {
     "min": 80,
     "max": 80,
     "quality": "reported",
     "raw": "80 W",
     "column": "Ignition Power (W)"
    },
    "ignition_time_s": {
     "min": 9.2,
     "max": 9.2,
     "quality": "reported",
     "raw": "9.2 s",
     "column": "Ignition Time (s)"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Air is drawn through the flow duct by fans",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.221,
     "max": 0.221,
     "approx": true,
     "quality": "reported",
     "raw": "~ 22.1",
     "column": "Percent O2 (Note 1)"
    },
    "pressure_kpa": {
     "min": 102.62971,
     "max": 102.62971,
     "quality": "reported",
     "raw": "14.8851816139256",
     "column": "Calibrated Data!J3",
     "note": "From NASA's file PSI-99_Raw Data_Saffire Sensor Data Sample 5.xlsx, Calibrated Data!J3. The first reading of NASA's Ambient Pressure (PSIA) in this sample's sensor record, 60 s before the igniter current first passed 0.5 A; multiplied by 6.894757293168 to give kPa. A reading at the start of the record, not an average over the burn; the pressure curve in series.csv shows the whole record. It replaces a value that had been assumed."
    },
    "sample_length_cm": {
     "min": 29,
     "max": 29,
     "quality": "reported",
     "raw": "29 cm",
     "column": "Sample Length"
    },
    "sample_thickness_mm": {
     "min": 0.37,
     "max": 0.37,
     "quality": "corrected",
     "raw": "0.37 mm",
     "column": "Samle Thickness",
     "note": "The PSI table reads '037 mm'. Decimal point missing in the PSI table (the other samples are 0.27 to 1.03 mm)."
    },
    "sample_width_cm": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5 cm",
     "column": "Sample Width (cm)"
    },
    "spread_rate_1g_mm_s": {
     "text": "Acceleratory",
     "quality": "reported",
     "raw": "Acceleratory",
     "column": "1-g Spread Rate"
    },
    "spread_rate_mm_s": {
     "min": 2.1,
     "max": 2.1,
     "quality": "reported",
     "raw": "2.1 mm/s",
     "column": "?-g Spread Length"
    }
   }
  },
  {
   "id": "PSI-99/saffire2/6",
   "accession": "PSI-99",
   "investigation": "Saffire-II",
   "type": "test",
   "label": "Sample 2-6",
   "source_table": "PSI-99_Experimental table_SAFFIRE-2.csv",
   "source_row": 6,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-99",
   "values": {
    "burn_length_1g_cm": {
     "text": "Complete",
     "quality": "reported",
     "raw": "Complete",
     "column": "1-g Burn Length"
    },
    "burn_length_cm": {
     "min": 29,
     "max": 29,
     "quality": "reported",
     "raw": "29 cm",
     "column": "?-g Burn Length"
    },
    "burn_time_s": {
     "min": 115,
     "max": 115,
     "quality": "reported",
     "raw": "115 s",
     "column": "Burn Time (s)"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "Flow Direction"
    },
    "flow_speed_cm_s": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "20 cm/s",
     "column": "Air Flow (cm/s)"
    },
    "fuel": {
     "text": "SIBAL fabric (cotton/fiberglass)",
     "quality": "corrected",
     "raw": "Cotton-Fiberglass (SIBAL)",
     "column": "Material",
     "note": "Blank in the PSI table (merged cell); taken from the row above."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "SIBAL, silicone, structure PMMA, flat PMMA, and PMMA with Nomex",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "corrected",
     "raw": "Cotton-Fiberglass (SIBAL)",
     "column": "Material",
     "note": "Blank in the PSI table (merged cell); taken from the row above."
    },
    "ignited": {
     "bool": true,
     "quality": "context",
     "raw": "flame ignited across the bottom of the fuel",
     "column": "p. 16",
     "note": "From NASA's file NTRS-20170008805.pdf, p. 16. The 5-cm-wide fabric tests are Saffire-II samples 2-5 (20 cm/s) and 2-6 (25 cm/s) (Table I, p. 29).",
     "evidence": "5-cm-wide concurrent-flow tests: flame ignited across the bottom of the fuel ‒ Two flow speeds tested; 20 and 25 cm/s",
     "evidence_source": "file:NTRS-20170008805.pdf"
    },
    "igniter_power_w": {
     "min": 80,
     "max": 80,
     "quality": "reported",
     "raw": "80 W",
     "column": "Ignition Power (W)"
    },
    "ignition_time_s": {
     "min": 9.2,
     "max": 9.2,
     "quality": "reported",
     "raw": "9.2 s",
     "column": "Ignition Time (s)"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Air is drawn through the flow duct by fans",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.221,
     "max": 0.221,
     "approx": true,
     "quality": "reported",
     "raw": "~ 22.1",
     "column": "Percent O2 (Note 1)"
    },
    "pressure_kpa": {
     "min": 102.61044,
     "max": 102.61044,
     "quality": "reported",
     "raw": "14.882386718817799",
     "column": "Calibrated Data!J3",
     "note": "From NASA's file PSI-99_Raw Data_Saffire Sensor Data Sample 6.xlsx, Calibrated Data!J3. The first reading of NASA's Ambient Pressure (PSIA) in this sample's sensor record, 60 s before the igniter current first passed 0.5 A; multiplied by 6.894757293168 to give kPa. A reading at the start of the record, not an average over the burn; the pressure curve in series.csv shows the whole record. It replaces a value that had been assumed."
    },
    "sample_length_cm": {
     "min": 29,
     "max": 29,
     "quality": "reported",
     "raw": "29 cm",
     "column": "Sample Length"
    },
    "sample_thickness_mm": {
     "min": 0.37,
     "max": 0.37,
     "quality": "corrected",
     "raw": "0.37 mm",
     "column": "Samle Thickness",
     "note": "The PSI table reads '037 mm'. Decimal point missing in the PSI table (the other samples are 0.27 to 1.03 mm)."
    },
    "sample_width_cm": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5 cm",
     "column": "Sample Width (cm)"
    },
    "spread_rate_1g_mm_s": {
     "text": "Acceleratory",
     "quality": "reported",
     "raw": "Acceleratory",
     "column": "1-g Spread Rate"
    },
    "spread_rate_mm_s": {
     "min": 2.6,
     "max": 2.6,
     "quality": "reported",
     "raw": "2.6 mm/s",
     "column": "?-g Spread Length"
    }
   }
  },
  {
   "id": "PSI-99/saffire2/7",
   "accession": "PSI-99",
   "investigation": "Saffire-II",
   "type": "test",
   "label": "Sample 2-7",
   "source_table": "PSI-99_Experimental table_SAFFIRE-2.csv",
   "source_row": 7,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-99",
   "values": {
    "burn_length_1g_cm": {
     "text": "~ 0 (Nomex)",
     "quality": "reported",
     "raw": "~ 0 (Nomex)",
     "column": "1-g Burn Length"
    },
    "burn_length_cm": {
     "min": 0,
     "max": 5,
     "levels": [
      0,
      5
     ],
     "quality": "reported",
     "raw": "5 cm & 0 (note 2)",
     "column": "?-g Burn Length"
    },
    "burn_time_s": {
     "min": 140,
     "max": 140,
     "quality": "reported",
     "raw": "140 s",
     "column": "Burn Time (s)"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "Flow Direction"
    },
    "flow_speed_cm_s": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "20 cm/s",
     "column": "Air Flow (cm/s)"
    },
    "fuel": {
     "text": "Nomex + PMMA",
     "quality": "reported",
     "raw": "PMMA & Nomex",
     "column": "Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "SIBAL, silicone, structure PMMA, flat PMMA, and PMMA with Nomex",
     "evidence_source": "psi"
    },
    "geometry": {
     "text": "fabric sheet",
     "quality": "reported",
     "raw": "PMMA & Nomex",
     "column": "Material"
    },
    "igniter_power_w": {
     "min": 80,
     "max": 80,
     "quality": "reported",
     "raw": "80 W",
     "column": "Ignition Power (W)"
    },
    "ignition_time_s": {
     "min": 9.2,
     "max": 9.2,
     "quality": "reported",
     "raw": "9.2 s",
     "column": "Ignition Time (s)"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Air is drawn through the flow duct by fans",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.221,
     "max": 0.221,
     "approx": true,
     "quality": "reported",
     "raw": "~ 22.1",
     "column": "Percent O2 (Note 1)"
    },
    "pressure_kpa": {
     "min": 102.57218,
     "max": 102.57218,
     "quality": "reported",
     "raw": "14.876837434328397",
     "column": "Calibrated Data!J3",
     "note": "From NASA's file PSI-99_Raw Data_Saffire Sensor Data Sample 7.xlsx, Calibrated Data!J3. The first reading of NASA's Ambient Pressure (PSIA) in this sample's sensor record, 60 s before the igniter current first passed 0.5 A; multiplied by 6.894757293168 to give kPa. A reading at the start of the record, not an average over the burn; the pressure curve in series.csv shows the whole record. It replaces a value that had been assumed."
    },
    "sample_length_cm": {
     "min": 5,
     "max": 24,
     "levels": [
      5,
      24
     ],
     "quality": "reported",
     "raw": "5 and 24 cm",
     "column": "Sample Length"
    },
    "sample_thickness_mm": {
     "min": 0.37,
     "max": 0.85,
     "levels": [
      0.37,
      0.85
     ],
     "quality": "reported",
     "raw": "0.85 and 0.37 mm",
     "column": "Samle Thickness"
    },
    "sample_width_cm": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5 cm",
     "column": "Sample Width (cm)"
    }
   }
  },
  {
   "id": "PSI-99/saffire2/8",
   "accession": "PSI-99",
   "investigation": "Saffire-II",
   "type": "test",
   "label": "Sample 2-8",
   "source_table": "PSI-99_Experimental table_SAFFIRE-2.csv",
   "source_row": 8,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-99",
   "values": {
    "burn_length_1g_cm": {
     "text": "Complete",
     "quality": "reported",
     "raw": "Complete",
     "column": "1-g Burn Length"
    },
    "burn_length_cm": {
     "min": 10,
     "max": 10,
     "approx": true,
     "quality": "reported",
     "raw": "~ 10 cm (note 3)",
     "column": "?-g Burn Length"
    },
    "burn_time_s": {
     "min": 600,
     "max": 600,
     "quality": "reported",
     "raw": "600 s",
     "column": "Burn Time (s)"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "Flow Direction"
    },
    "flow_speed_cm_s": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "20 cm/s",
     "column": "Air Flow (cm/s)"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "reported",
     "raw": "PMMA",
     "column": "Material"
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "SIBAL, silicone, structure PMMA, flat PMMA, and PMMA with Nomex",
     "evidence_source": "psi"
    },
    "igniter_power_w": {
     "min": 97,
     "max": 97,
     "quality": "reported",
     "raw": "97 W",
     "column": "Ignition Power (W)"
    },
    "ignition_time_s": {
     "min": 30,
     "max": 30,
     "quality": "reported",
     "raw": "30 s",
     "column": "Ignition Time (s)"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Air is drawn through the flow duct by fans",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.22,
     "max": 0.221,
     "quality": "reported",
     "raw": "22.1 to 22.0",
     "column": "Percent O2 (Note 1)"
    },
    "pressure_kpa": {
     "min": 102.61687,
     "max": 102.61687,
     "quality": "reported",
     "raw": "14.883318350520398",
     "column": "Calibrated Data!J3",
     "note": "From NASA's file PSI-99_Raw Data_Saffire Sensor Data Sample 8.xlsx, Calibrated Data!J3. The first reading of NASA's Ambient Pressure (PSIA) in this sample's sensor record, 60 s before the igniter current first passed 0.5 A; multiplied by 6.894757293168 to give kPa. A reading at the start of the record, not an average over the burn; the pressure curve in series.csv shows the whole record. It replaces a value that had been assumed."
    },
    "sample_length_cm": {
     "min": 29,
     "max": 29,
     "quality": "reported",
     "raw": "29 cm",
     "column": "Sample Length"
    },
    "sample_thickness_mm": {
     "text": "See Fig. 5",
     "quality": "reported",
     "raw": "See Fig. 5",
     "column": "Samle Thickness"
    },
    "sample_width_cm": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5 cm",
     "column": "Sample Width (cm)"
    },
    "spread_rate_1g_mm_s": {
     "text": "Acceleratory",
     "quality": "reported",
     "raw": "Acceleratory",
     "column": "1-g Spread Rate"
    },
    "spread_rate_mm_s": {
     "text": "Note 4",
     "quality": "reported",
     "raw": "Note 4",
     "column": "?-g Spread Length"
    }
   }
  },
  {
   "id": "PSI-99/saffire2/9",
   "accession": "PSI-99",
   "investigation": "Saffire-II",
   "type": "test",
   "label": "Sample 2-9",
   "source_table": "PSI-99_Experimental table_SAFFIRE-2.csv",
   "source_row": 9,
   "psi_url": "https://psi.nasa.gov/physci/repo/data/investigations/PSI-99",
   "values": {
    "burn_length_1g_cm": {
     "text": "Complete",
     "quality": "reported",
     "raw": "Complete",
     "column": "1-g Burn Length"
    },
    "burn_length_cm": {
     "min": 10,
     "max": 10,
     "approx": true,
     "quality": "reported",
     "raw": "~ 10 cm (note 4)",
     "column": "?-g Burn Length"
    },
    "burn_time_s": {
     "min": 900,
     "max": 900,
     "quality": "reported",
     "raw": "900 s",
     "column": "Burn Time (s)"
    },
    "flow_direction": {
     "text": "concurrent",
     "quality": "reported",
     "raw": "Concurrent",
     "column": "Flow Direction"
    },
    "flow_speed_cm_s": {
     "min": 20,
     "max": 20,
     "quality": "reported",
     "raw": "20 cm/s",
     "column": "Air Flow (cm/s)"
    },
    "fuel": {
     "text": "PMMA",
     "quality": "corrected",
     "raw": "PMMA",
     "column": "Material",
     "note": "Blank in the PSI table (merged cell); taken from the row above."
    },
    "fuel_phase": {
     "text": "solid",
     "quality": "context",
     "evidence": "SIBAL, silicone, structure PMMA, flat PMMA, and PMMA with Nomex",
     "evidence_source": "psi"
    },
    "igniter_power_w": {
     "min": 97,
     "max": 97,
     "quality": "reported",
     "raw": "97 W",
     "column": "Ignition Power (W)"
    },
    "ignition_time_s": {
     "min": 30,
     "max": 30,
     "quality": "reported",
     "raw": "30 s",
     "column": "Ignition Time (s)"
    },
    "o2_basis": {
     "text": "ambient",
     "quality": "context",
     "evidence": "Air is drawn through the flow duct by fans",
     "evidence_source": "psi"
    },
    "o2_fraction": {
     "min": 0.219,
     "max": 0.22,
     "quality": "reported",
     "raw": "22.0 to 21.9",
     "column": "Percent O2 (Note 1)"
    },
    "pressure_kpa": {
     "min": 102.68082,
     "max": 102.68082,
     "quality": "reported",
     "raw": "14.892594161820199",
     "column": "Calibrated Data!J3",
     "note": "From NASA's file PSI-99_Raw Data_Saffire Sensor Data Sample 9.xlsx, Calibrated Data!J3. The first reading of NASA's Ambient Pressure (PSIA) in this sample's sensor record, 60 s before the igniter current first passed 0.5 A; multiplied by 6.894757293168 to give kPa. A reading at the start of the record, not an average over the burn; the pressure curve in series.csv shows the whole record. It replaces a value that had been assumed."
    },
    "sample_length_cm": {
     "min": 29,
     "max": 29,
     "quality": "reported",
     "raw": "29 cm",
     "column": "Sample Length"
    },
    "sample_thickness_mm": {
     "min": 10,
     "max": 10,
     "quality": "reported",
     "raw": "1 cm",
     "column": "Samle Thickness"
    },
    "sample_width_cm": {
     "min": 5,
     "max": 5,
     "quality": "reported",
     "raw": "5 cm",
     "column": "Sample Width (cm)"
    },
    "spread_rate_1g_mm_s": {
     "text": "Acceleratory",
     "quality": "reported",
     "raw": "Acceleratory",
     "column": "1-g Spread Rate"
    },
    "spread_rate_mm_s": {
     "text": "Note 4",
     "quality": "reported",
     "raw": "Note 4",
     "column": "?-g Spread Length"
    }
   }
  }
 ]
}